FCC ID: ACJ9TGCF-302 Panasonic Toughbook with WLAN, EvDO & Bluetooth

 

OPERATING INSTRUCTIONS Personal Computer Model No. CF-30 series Contents Getting Started Introduction ................................................................. 2 Read Me First ............................................................. 3 Description of Parts ..................................................10 First-time Operation ..................................................13 Useful Information On-screen Manual ....................................................15 Handling and Maintenance .......................................16 Hard Disk Backup Function (Recover Pro) ..............18 Hard Disk Data Erase Utility .....................................20 Reinstalling Software ................................................21 Troubleshooting Error Code/Message ................................................23 Troubleshooting (Basic) ............................................24 Appendix LIMITED USE LICENSE AGREEMENT ...................28 Contrat de licence dusage limit .............................29 Speci cations ...........................................................30 LIMITED WARRANTY ..............................................32 d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e b u o r T l x i d n e p p A For more information about the com-

puter, you can refer to the on-screen manual. To access the on-screen manual

page 15 On-screen Manual Please read these instructions carefully before using this product and save this manual for future use. Introduction Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.

Terms and illustrations in these instructions CAUTION :

NOTE :

Enter :

Fn + F5 :

[start] - [Run] : Click [start], and then click [Run]. You may need to double-click in some cases.

Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key. Page in these Operating Instructions or in the Reference Manual. Reference to the on-screen manuals.

Some illustrations are simpli ed to help your understanding and may look different from the actual unit.

If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

Refer for the latest information about optional products to the catalogs, etc.

In these instructions, the names and terms are referred as follows.

Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies as Windows or Windows XP

DVD-ROM & CD-R/RW drive, and DVD MULTI drive as CD/DVD drive

Circular media including DVD-ROM and CD-ROM as discs

The display modes are referred as follows. ( ) indicates the terms in [Intel 82852/82855 GM/GME Graphics Con-

troller Properties] screen. To display the screen, select [start] - [Control Panel] - [Other Control Panel Options] -

[Intel(R) Extreme Graphics 2 M].

Internal LCD (Notebook): The computers display

External display (Monitor): External display

Simultaneous display (Intel Dual Display Clone): The same screen is displayed on the internal LCD and the ex-

Extended desktop: The extended working area across the internal LCD and the external display. ternal display.

Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Disclaimer Computer speci cations and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd. as-

sumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.

Trademarks Microsoft, Windows, the Windows logo and IntelliMouse are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, Viiv, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation. SD Logo is a trademark. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. WinDVD is a trademark of InterVideo, Inc. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. d e t r a t S g n i t t e G 2 Read Me First Models for U.S.A. Federal Communications Commission Radio Fre-

quency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected. Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help. Warning To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral. Also, any changes or modications not expressly ap-

proved by the party responsible for compliance could void the users authority to operate this equipment. FCC RF Exposure Warning:

This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be speci-

cally recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

<Only for model with wireless LAN/Bluetooth>

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment may not be co-located or operated with any other antenna or transmitter. This equipment has been approved for mobile operation, and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 20 cm spacing be provided between antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This equipment may use multiple installed transmitters, which may be capable of simultaneous transmission. This equipment is provided with external antenna connector(s) for connection to optional Car Mounter or Port Replicator for mobile external mounted antenna(s). External antenna(s) must be professionally installed and cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters. Also, user must maintain mini-

mum 20 cm spacing between external antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

<Only for model with wireless LAN>

WLAN external antenna connector is intended for con-

nection to Radiall/Larsen WLAN Base Whip antenna, type NM05E2400BKTNC with 5 dBi antenna.

<Only for model with wireless WAN>

WWAN external antenna connector is intended for professional installation and should not exceed maxi-

mum antenna gain of 9.85 dBi for 824.7 - 848.31 MHz operation and 8.34 dBi for 1851.25 - 1908.75 MHz operation. 25-M-3-1 This device complies with Part 15 of the FCC Rules. Op-

eration is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired op-

eration. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-8675) 6-M-1 FCC Regulation Notice for modem This equipment contains a FCC approved modem. 1. This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If re-

quired, this information must be provided to the tele-

phone company. 2. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instruc-

tions for details. 3. The REN is used to determine the quantity of devices which may be connected to the telephone line. Ex-

cessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not ex-

ceed ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. 4. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to le a complaint with the FCC if you believe it is neces-

sary. 5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modications to maintain uninterrupted service. 6. If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1-800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equip-

ment until the problem is resolved. 7. There are no user serviceable parts contained in this equipment. 8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party lines is subject to state tariffs. d e t r a t S g n i t t e G 3 Read Me First 9. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the rst page of the transmission, the date and time it is sent and an identi cation of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used. 10. According to the FCCs electrical safety advisory, we recommend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem. Caution : To reduce the risk of re, use only No.26 AWG or larger telecommunication line cord. ATTENTION : Pour rduire le risque dincendie, utiliser uniquement des conducteurs de tlcommunications 26 AWG ou de section suprieure. 16-M-1 d e t r a t S g n i t t e G Notice for the products using LCD This product uses one or more uorescent lamps contain-

ing a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:

<http://www.eiae.org/>

24-M-1 UL1604-conforming model.(The model which has de-

scription of UL1604 in the bottom of the computer.)

THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,DIVISION2,GROUPS A,B,C, AND D OR NON-HAZARDOUS LOCATIONS ONLY.

WARNING-EXPLOSION HAZARD-SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASSI,DIVISION2.

When connecting and using a device manufactured by a third party,enquire to the manufacturer as to whether the device suits CLASS1,DIVISION2. 33-M-1 Models for Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is af xed on the modem unit. EQUIPMENT ATTACHEMENT LIMITATIONS NOTICE: The Industry Canada label identi es certi ed equipment. This certi cation means that the equipment meets telecommunications network protective, opera-

tional and safety requirements as prescribed in the ap-

propriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connec-

tion. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certi ed equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the elec-

trical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be par-

ticularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection author-

ity, or electrician, as appropriate. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maxi-

mum number of terminals allowed to be connected to a tele-

phone interface. The termination on an interface may consist of any combination of devices subject only to the require-

ment that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. REN: See bottom of the computer 4 RESTRICTIONS CONCERNANT LE RACCORDEMENT DE MATRIEL AVIS: Ltiquette dIndustrie Canada identi e le matriel homologu. Cette tiquette certi e que le matriel est conforme aux normes de protection, dexploitation et de scurit des rseaux de tlcommunications, comme le prescrivent les documents concernant les exigences techniques relatives au matriel terminal. Le Ministre nassure toutefois pas que le matriel fonctionnera la satisfaction de lutilisateur. Avant dinstaller ce matriel, lutilisateur doit sassurer quil est permis de le raccorder aux installations de lentreprise locale de tlcommunication. Le matriel doit galement tre install en suivant une mthode accepte de raccordement. Labonn ne doit pas oublier quil est possible que la con-

formit aux conditions nonces ci-dessus nempche pas la dgradation du service dans certaines situations. Les rparations de matriel homologu doivent tre coor-

donnes par un reprsentant dsign par le fournisseur. Lentreprise de tlcommunications peut demander lutilisateur de dbrancher un appareil la suite de rpa-

rations ou de modi cations effectues par lutilisateur ou cause de mauvais fonctionnement. Pour sa propre protection, lutilisateur doit sassurer que tous les ls de mise la terre de la source dnergie lectrique, des lignes tlphoniques et des canalisations deau mtalliques, sil y en a, sont raccords ensemble. Cette prcaution est particulirement importante dans les rgions rurales. Avertissement: Lutilisateur ne doit pas tenter de faire ces raccordements lui-mme; il doit avoir recours un service dinspection des installations lec-

triques, ou un lectricien, selon le cas. AVIS: Lindice dquivalence de la sonnerie (IES) assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface. La terminaison dune interface tlphonique peut consister en une combinaison de quelques dispositifs, la seule condi-

tion que la somme dindices dquivalence de la sonnerie de touts les dispositifs nexcde pas 5. IES: Voir sous le fond de lordinateur 17-Ca-1 CSA C22 2 NO.213-conforming model.(The model which has description of CSA C22 2 NO.213 in the bottom of the computer.)

THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,DIVISION2,GROUPS A,B,C, AND D OR NON-HAZARDOUS LOCATIONS ONLY.

WARNING-EXPLOSION HAZARD-SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASSI,DIVISION2.

When connecting and using a device manufactured by a third party,enquire to the manufacturer as to whether the device suits CLASS1,DIVISION2. 33-Ca-1

<Only for models with wireless LAN/Bluetooth>

Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including inter-

ference that may cause undesired operation of the device.

<Only for models with wireless LAN>

This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LELAN devices. 30-Ca-1 25-Ca-1-1 This device has been designed to operate with an anten-

na having a maximum gain of 2.15 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.

<Only for models with wireless LAN>

RF Exposure Warning This equipment has been approved for mobile operation, and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 20 cm spacing be proved between antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

<Pour modles LAN sans l uniquement>

Mise en garde concernant lexposition lnergie radiofrquence Cet quipement a t homologu pour un fonctionnement sans l et, sauf avis contraire inclus dans la notice dutili-

sation dun autre metteur sans l, une distance minimale de 20 cm doit tre assure entre lantenne et le corps de toute personne ( lexclusion des mains, poignets et pieds) pendant le fonctionnement sans l. 25-M-5-1 d e t r a t S g n i t t e G Models for Europe

<Only for model with a CE mark on the bottom of the computer>

Declaration of Conformity (DoC) Hereby, we declare that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:

If you want to get a copy of the original DoC of our products which relates to the R&TTE, please con-

tact our web address: http://www.doc.panasonic.de Contact:

Panasonic Services Europe A Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Network connection. The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks Technical Features. The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Nether-

lands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria. 18-E-1 Compliance Notice - CE Mark This equipment is in conformance with the requirements of the European Council Directive listed below:

73/23/EEC Low Voltage Directive with amendment 93/68/EEC 89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC 1999/5/EC R&TTE 21-E-1 5 Read Me First Important Safety Instructions / Importantes Mesures De Scurit When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a re. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS 19-E-1 d e t r a t S g n i t t e G Certaines mesures de scurit doivent tre prises pen-

dant lutilisation de matrial tlphonique a n de rduire les risques dincendie, de choc lectrique et de blessures. En voici quelquesunes:

1. Ne pas utiliser lappareil prs de leau, p.ex., prs d une baignoire, dun lavabo, dun vier de cuisine, dun bac laver, dans un sous-sol humide ou prs dune piscine. 2. viter dutiliser le tlphone (sauf sil sagit dun ap-

pareil sans l) pendant un orage lectrique. Ceci peut prsenter un risque de choc lectrique caus par la foudre. 3. Ne pas utiliser lappareil tlphonique pour signaler une fuite de gaz sil est situ prs de la fuite. 4. Utiliser seulement le cordon dalimentation et le type de piles indiqus dans ce manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conform-

er aux rglements pertinents quant llimination des piles. CONSERVER CES INSTRUCTIONS 19-F-1 Information to the User

<Only for model with wireless LAN and/or Bluetooth>

This product and your Health This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations re ect the consensus of the scienti c community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Lithium Battery / Pile au lithium Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service person-

nel. Warning!

A risk of explosion from incorrect installation or misappli-

cation may possibly occur. 15-E-1 6

Using this product on board of airplanes, or

In any other environment where the risk of interference to other devices or services is perceived or identi ed as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a speci c organization or environ-

ment (e.g. airports), you are encouraged to ask for autho-

rization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interfer-

ence caused by unauthorized modi cation of this product. The correction of interference caused by such unauthor-

ized modi cation will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 26-M-1 Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre remplace que par un technicien quali . Danger ! Risque dexplosion en cas de non respect de cette mise en garde!

15-F-1 Precautions THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-

FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1 . PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULT-

ING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of ight

(e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are de ned by FAA: AC (Advisory Circular) 120-76A or JAA:

JAA TGL (Temporary Guidance Lea ets) No.36. Panasonic cannot guarantee any speci cations, technolo-

gies, reliability, safety (e.g. Flammability/Smoke/Toxic-

ity/Radio Frequency Emission, etc) requirements related to aviation standards that exceed the speci cations of our COTS (Commercial-Off-The-Shelf) products. 39-E-1 This computer is not intended for use in medical equipment including life-support systems, air traf c control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this computer in these types of equipment, devices or systems, etc. The CF-30 was developed based on thorough research into the real-world portable computing environments. Exhaustive pursuit of usability and reliability under harsh conditions led to innovations such has the magnesium alloy exterior, vibra-

tion damped hard disk drive and oppy disk drive, exible internal connections. The CF-30s outstanding engineering has been tested using the strict MIL-STD- 810F (for vibration and shock) and IP (for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid any damage. The following usage and han-

dling procedures are recommended. Before putting the computer away, be sure to wipe off any moisture. If a Malfunction Occurs, Immediately Unplug the AC Cord and the Battery Pack

Computer is damaged

Foreign object inside computer

Smoke emitted

Unusual smell emitted

Unusually hot Continuing to use the computer while any of the above con-

ditions are present may result in re or electric shock.

If a malfunction occurs, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Do Not Touch the Computer and Cable When It Starts Thundering Electric shock may result. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Otherwise, a re due to overheating may result. Connecting to a DC/AC converter (inverter) may damage the AC adap-

tor. On an airplane, only connect the AC adaptor/charger to an AC outlet speci cally approved for such use. Do Not Do Anything That May Damage the AC Cord, the DC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in re, short circuit, or electric shock. Do Not Pull or Insert the DC Plug If Your Hands Are Wet Electric shock may result. Clean the DC Plug of Dust and Other Debris Regularly If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a re.

Pull the plug, and wipe it with a dry cloth. Pull the plug if the computer is not being used for a long period of time. Insert the AC Plug Completely If the plug is not inserted completely, re due to overheating or electric shock may result.

Do not use a damaged plug or loose AC outlet. Close the Connector Cover Tightly When Using the Computer Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. The entry of foreign matter may cause a re or electric shocks.

If foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support of-

ce. Do Not Disassemble the Computer There are high-voltage areas inside which may give you an electric shock if you should touch them. Do not touch the pins and circuit boards inside, and do not allow foreign mat-

ter to enter inside. Also, remodeling or disassembly may cause a re. Keep SD Memory Cards Away from Infants and Small Children Accidental swallowing will result in bodily injury. In the event of accidental swallowing, see a doctor immedi-

ately. Do Not Place the Computer on Unstable Surfaces If balance is lost, the computer may fall over or drop, result-

ing in an injury. Avoid Stacking If balance is lost, the computer may fall over or drop, result-

ing in an injury. Do Not Leave the Computer in High Temperature Envi-

ronment Such as in a Sun-Heated Car, for a Long Period of Time Leaving the computer where it will be exposed to extremely high temperatures such as in a sun-heated car or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a re or electric shocks. Hold the Plug When Unplugging the AC Cord Pulling on the cord may damage the cord, resulting in a re or electric shock. Do Not Move the Computer While the DC Plug Is Con-

nected The AC cord may be damaged, resulting in re or electric shock.

If the AC cord is damaged, unplug the DC plug immedi-

ately. Use Only the Speci ed AC Adaptor With Your Computer Using an AC adaptor other than the one supplied (attached to your computer or supplied by Panasonic) may result in a re. Do Not Subject the AC Adaptor to Any Strong Impact Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or re. Take a Break of 10-15 Minutes Every Hour Using the computer for long periods of time may have detri-

mental health effects on the eyes or hands. d e t r a t S g n i t t e G 7

Networks other than 1000BASE-TX, 100BASE-TX or 10BASE-T

Phone lines (Telephone lines, internal phone lines (on-

premise switches), digital public phones, etc.) Do Not Use with Exposing the Skin to the Computer for a Long Period of Time Using the computer with exposing the skin to the heat source of the computer or AC adaptor for a long period of time can cause a low-temperature burn.

Do not place the computer near a television or radio re-

ceiver.

Keep the computer away from magnets. Data stored on the hard disk may be lost. NOTE

The battery pack may become warm during recharg-

ing or normal use. This is completely normal. Reference Manual Battery Power) Once the

Recharging will not commence if internal temperature of the battery pack is outside of the allowable temper-

ature range (0 C to 50 C {32F to 122 F}).

( allowable range requirement is satis ed, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50 F} or below.)

If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable temperature range.

This computer has a high temperature mode function that prevents the degradation of the battery in high temperature environments. ( Battery Power) A level corresponding to a 100%

charge for high temperature mode is approximately equivalent to an 80% charge level for normal tempera-

ture mode. Reference Manual

The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and re-

peated recharging does not restore its performance, the battery pack should be replaced with a new one.

When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected.

Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. Read Me First Do Not Turn the Volume Up to Loud When Using Head-

phones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. Use the Modem with a Regular Telephone Line Connection to an internal phone line (on-premise switches) of a company or business of ce, etc. or to a digital public phone or use in a country or area not supported by the com-

puter may result in a re or electric shocks. Do Not Connect a Telephone Line, or a Network Cable Other Than the One Speci ed, into the LAN Port If the LAN port is connected to a network such as the ones listed below, a re or electric shock may result. Precautions (Battery Pack) Do Not Use with Any Other Computer The battery pack is rechargeable and was intended for the speci ed computer or charger. If it is used with a computer other than the one for which it was designed, electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Charge the Battery Using the Methods Other Than Indicated in This Manual If the battery pack is not charged using one of the methods indicated in this manual, electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Generation of heat, ignition or rupture may result. Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Insert Sharp Objects into the Battery Pack, Ex-

pose It to Bumps or Shocks, Disassemble, or Modify It Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Short the Positive (+) and Negative (-) Contacts Generation of heat, ignition or rupture may result. Do not place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing. Do Not Use This Computer with a Battery Pack Other Than the One Speci ed Use only the speci ed battery pack (CF-VZSU43U) with your CF-30. Use of battery packs other than those manufactured and supplied by Panasonic may present a safety hazard

(generation of heat, ignition or rupture).

Do not touch the terminals on the battery pack. The bat-

tery pack may no longer function properly if the contacts are dirty or damaged.

Do not expose the battery pack to water, or allow it to become wet.

If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.

This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity.

The battery pack is not charged when the computer is rst purchased. Be sure to charge it before using it for the rst time. When the AC adaptor is connected to the computer, charging begins automatically.

Should the battery leak and the uid get into your eyes, do not rub your eyes. Immediately ush your eyes with clear water and see a doctor for medical treatment as soon as possible. d e t r a t S g n i t t e G 8 For Used in Motor Vehicle /Pour Lutilisation Dans Un Vhicule Motoris Warning: Notebook Computer may be installed in a mo-

tor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If used for entertainment purpose, such as television recep-

tion or video play, it must be installed to the rear of the drivers seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to de-

termine lawful use of this product while operating within a motor vehicle. Avertissement : Lordinateur bloc-notes peut tre install dans un vhicule motoris et dans le champ de vision du conducteur uniquement en tant que dispositif daide aux fonctions du vhicule, comme par exemple pour fournir des informations sur le vhicule, comme dispositif de contrle de systme, pour lobservation larrire ou sur les cts du vhicule, ainsi que pour fournir de linforma-

tion routire. Pour toute utilisation n de divertissement, comme par exemple pour regarder la tlvision ou jouer des jeux vido, il doit tre install larrire du sige du conducteur, en un emplacement o il ne sera pas visible, ni directement ni indirectement, pour le conducteur du vhicule motoris. Vri ez les lois fdrales et nationales qui rgissent lutilisation lgale de cet appareil lintrieur dun vhicule motoris. 35-M-1 d e t r a t S g n i t t e G Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. Please dispose of this item only in designated national waste electronic collection schemes, and not in the ordinary dust bin. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 36-E-1 9 Description of Parts EX PC A D E F G H I J K K L K M N O d e t r a t S g n i t t e G Reference Manual PC Card / ExpressCard

: Battery status A: Bluetooth antenna

<Only for model with Bluetooth>

Reference Manual Bluetooth B: ExpressCard slot Reference Manual PC Card / ExpressCard C: PC Card slot D: Multimedia pocket

Reference Manual Multimedia Pocket E: Battery pack F: Wireless LAN antenna

<Only for model with wireless LAN>

Reference Manual Wireless LAN G: LCD

<Only for model with touchscreen>

Reference Manual Touchscreen H: Function key

Reference Manual Key Combinations I: Keyboard J: Touch pad K: LED indicator

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Multimedia pocket device status or the second battery status

Battery Power Reference Manual Multimedia Pocket

: Hard disk drive status

: Power status of the multimedia pocket

: Power status

(Off: Power off/Hibernation, Green: Power on, Blinking green: Standby, Blinking green rapidly:

Cannot power on or resume due to low tempera-

ture.)

Reference Manual Battery Power

: Wireless ready indicator This indicator lights when Wireless LAN, Blue-

tooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.

Reference Manual Wireless LAN Blue-

tooth Wireless Switch Utility

: Wireless WAN status indicator

<Only for model with wireless WAN>

Reference Manual Wireless Switch Utility

Reference Manual Wireless LAN Bluetooth L: Power switch M: Wireless switch Wireless Switch Utility N: Stylus holder O: Carrying handle A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. 10 Right side Rear side A B C D FE G H I 1394 Bottom J H K L M N O P A: Hard disk drive L: Expansion bus connector Reference Manual Hard Disk Drive

Reference Manual Port Replicator B: SD Memory Card slot M: External display port Reference Manual SD Memory Card

Reference Manual External Display

C: SD Memory Card indicator

(Blinking: During access or a password is requested)

Reference Manual SD Memory Card D: IEEE 1394 interface connector

Reference Manual IEEE 1394 Devices E: Smart Card slot

<Only for model with Smart Card slot>

Reference Manual Smart Card

F: Modem port

Reference Manual Modem G: LAN port

Reference Manual LAN H: USB port

Reference Manual USB Devices I: DC-IN jack J: Security lock You can connect a Kensington cable. Refer to the instruction manual of the cable. K: Ext antenna connector

Reference Manual Port Replicator N: Headphone jack You can connect headphones or ampli ed speakers. When they are connected, audio from the internal speakers is not heard. O: Microphone jack You can use a stereo condenser microphone. Con-

necting other type of microphone may interrupt audio input or may cause a malfunction. NOTE

When using an external microphone, do not remove the check mark for Mute under Microphone Bal-

ance of the Volume Control dialog box and do not increase the playback volume. Howling may result. Howling may occur in the same way when discon-

necting an external microphone. (The microphone of Volume Control is in the state of mute at the time of factory shipment. This is not shown at the time of fac-

tory shipment.) P: Serial port Q: RAM module slot

Reference Manual RAM Module R: Speaker

Reference Manual Key Combinations CAUTION

Do not put a metallic object or magnetic media close to the speakers. d e t r a t S g n i t t e G 11 Description of Parts Attaching the stylus to the computer Use the tether to attach the stylus to the computer so you will not lose it. There are holes to attach it on both sides of the bottom of the display. 3 4 d e t r a t S g n i t t e G 1 2 12 d e t r a t S g n i t t e G First-time Operation

Preparation A Check and identify the supplied accessories. If you do not nd the described accessories, contact Panasonic Technical Support ( page 32). AC Adaptor . 1 AC Cord . 1 Battery Pack . 1 Modem Telephone Cable . 1 Model No: CF-AA1653A Operating Instructions (This book) . 1 Product Recovery DVD-ROM . 1 Windows Book . 1 Model No: CF-VZSU46U

<Only for model with touchscreen>

Soft Cloth . 1 Stylus . 1 B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computers packaging

( page 28).

( Reference Manual Touchscreen) 1 2 1 2 3 4 5 1 Insert the battery pack. A Slide the latch (A) to the right to unlock the cover. B Slide the latch (A), and open the cover. C Insert the battery pack until it securely ts the connector. D Close the cover until it clicks. E Slide the latch (B) to the left to lock the cover. CAUTION

Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer.

Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. 2 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION

Do not disconnect the AC adaptor and do not switch the wireless switch to on until the rst-time operation procedure is completed.

When using the computer for the rst time, do not connect any peripheral device except the battery pack and AC adaptor.

Handling the AC adaptor

Do not twist or pull the AC power cord forcefully. Doing so may damage the connections.

Use only the speci ed AC adaptor with your computer. Using an AC adaptor other than the one supplied might damage the battery and/or the computer.

When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet.

Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninter-

ruptible power source (UPS) is highly recommended unless running from the battery pack alone. 13 First-time Operation 3 2 1 3 d e t r a t S g n i t t e G 3 Turn on the computer. A Pull the carrying handle forward. B Lift up the latch (A) and lift open the display. C Slide and hold the power switch power indicator lights. for approximately one second until the CAUTION

Do not slide the power switch repeatedly.

The computer will forcibly be turned off if you slide and hold the power switch for

Once you turn off the computer, wait for ten seconds or more before you turn on four seconds or longer. the computer again.

Do not perform the following operation until the hard disk drive indicator

Connecting or disconnecting the AC adaptor

Sliding the power switch

Touching the keyboard, touch pad or touchscreen (only for model with touchscreen)

Closing the display

When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support ( page 32). turns off. 4 Setup Windows. A Follow the on-screen instructions. CAUTION

When you set date/time/time zone and click [Next], the screen may not go to the next step for a few minutes. Do not touch the keyboard or touch pad, and wait until the screen changes.

If An unexpected error has occurred (or a similar message) is displayed, select [OK]. This is not a malfunction.

Wait until the hard disk drive indicator has turned off. 5 Create a new account. A Click [start] - [Control Panel] - [User Accounts] - [Create a new account]. CAUTION

Remember your password. If you forget the password, you cannot use the Windows operation system. Creating a password reset disk beforehand is recommended. 6

<Only for model with touchscreen>

Perform the touchscreen calibration. A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen B Using the stylus, touch each of the 12 + target marks one by one until it Calibration Utility]. blinks, and then click [Calibration]. C Click [Save & Exit]. NOTE

Regarding Windows XP You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

Windows Update You can update to the latest patches and service packs for Windows with the following menus.

[start] - [All Programs] - [Windows Update]

Do not apply Driver Updates even if a message to update a driver appears. If a driver update is required, contact Panasonic Technical Support ( page 32).

If the message Your computer might be at risk is displayed Select on the taskbar and make the appropriate settings. The Windows Security Center regularly gives you no-

tice so that you can make the optimum settings. This is not an error message and you can use the computer. How-

ever, making appropriate measures is recommended to reduce the risk of virus and other attacks.

Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in Approx. XX weeks.

(when second battery pack is attached: Approx. XX weeks) 14 On-screen Manual You can access the Reference Manual and the Important Tips on the computer screen. When you access the Reference Manual and the Important Tips for the rst time, the License Agreement of the Adobe Reader may be displayed. Read it carefully and select [Accept] to proceed.

Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computers performance. To access the Reference Manual:

A Click [start] - [Reference Manual]. Contents

Key Combinations

Touchscreen

Panasonic Hand Writing

Standby/Hibernation Functions

Security Measures

Battery Power

Multimedia Pocket

PC Card / ExpressCard

SD Memory Card

SD Security

Smart Card

RAM Module

Port Replicator

External Display

USB Devices

IEEE 1394 Devices

Modem

LAN

Wireless Switch Utility

Wireless LAN

Bluetooth

Hard Disk Drive

Setup Utility

Icon Enlarger

Loupe Utility

DMI Viewer

Recover Pro

Technical Information

Troubleshooting (Advanced)

Important Tips The Important Tips will provide you with the helpful information about the battery and touchscreen. Read to use the battery pack in the optimum condition to obtain longer operation time. To access the Important Tips:

A Double-click on the desktop.

Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips]. n o i t a m r o f n I l u f e s U 15 n o i t a m r o f n I l u f e s U Handling and Maintenance Operation Environment

Place the computer on a at stable surface. Do not place the computer upright or turn it over. If the computer is exposed to an extremely strong impact, it may become inoperable.

Temperature: Operation : 5 C to 35 C {41 F to 95 F}

Storage : -20C to 60 C {- 4 F to 140 F}

Operation : 30% to 80% RH (No condensation) Humidity:

Storage : 30% to 90% RH (No condensation) Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in the product deterioration and will shorten the product life.

Do not place the computer in the following areas, otherwise the computer may be damaged.

Near electronic equipment. Image distortion or noise may occur.

In extremely high or low temperature.

As the computer can become hot during operation, keep it away from items that are sensitive to heat. Handling Cautions This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a drip-proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when han-

dling the computer.

When carrying the computer:

Turn off the computer.

Remove all external devices, cables, cards and other protruding things.

Do not drop or hit the computer against solid objects.

Do not leave the display open.

Do not grip the display part.

Do not put anything (e.g., a piece of paper) between the display and keyboard.

When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the airlines instructions.

When carrying a spare battery, put it in a plastic bag to protect its terminals.

The touch pad is designed to be used with a nger tip. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

<Only for model with touchscreen>

Use only the included stylus to touch the touchscreen. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

Do not use the stylus when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/stylus can scratch the screen surface or obstruct the stylus operation.

Use the stylus only for touching the screen. Using it for any other purpose may damage the stylus and result in scratches on the screen.

When using peripheral devices Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices.

Use the peripheral devices conforming to the computers speci cations.

Connect to the connectors in the correct direction.

If it is hard to insert, do not try forcibly but check the connectors shape, direction, alignment of pins, etc.

If screws are included, fasten them securely.

Remove the cables when you carry the computer. Do not pull the cables forcibly.

Preventing your computer from unauthorized use via wireless LAN

<Only for model with wireless LAN>

Before using wireless LAN, make the appropriate security settings such as data encryption. 16

Preparations for installing Absolute Computrance Software

<Only for USA model>

Perform the following steps before installing Absolute Computrance Software to prevent thefts. 1 Turn on or restart the computer, and press F2 several times while [Panasonic] boot screen is displayed. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. Select the [Advanced] menu, then select [Computrace (R) Sub-Menu] and press Enter. 2 CAUTION

You can only make this setting once. You will be unable to disable this once you have selected [Enable]. 3 4 5 6 7 8 Select [Computrace (R) BIOS Module], and set to [Enable]. Select [Execute] and press Enter. Select [Execute] and press Enter. Press Esc to close the sub-menu. Press F10. At the con rmation message, select [Yes] and press Enter. The computer restarts. Install Absolute Computrance Software by referring to its manual. Maintenance To clean the LCD panel Use the soft cloth included with the computer. (For further information, refer to Suggestions About Cleaning the LCD Surface that comes with the soft cloth.) To clean areas other than the LCD panel Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly. n o i t a m r o f n I l u f e s U CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage. 17 n o i t a m r o f n I l u f e s U Hard Disk Backup Function (Recover Pro) The Recover Pro creates a backup area (storage area) on the hard disk to back up (store) the hard disk data restore the backup data to its original location when it is lost or corrupted by operational errors or other factors. You do not need external media or peripheral devices to back up or restore hard disk data on this computer. At purchase, the Recover Pro is not installed. Install using the instructions below. If you create a backup area, the hard disk backup function will be enabled and you can back up your data. The Recover Pro cannot back up or restore data correctly if a hard disk problem occurs during data backup or re-

storing. If an error occurs due to an unexpected malfunction, incorrect operation, or other reason while data is being restored, the hard disk data (data before restoration) may be lost. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damage suffered (including loss of data) as a result of the use of this function. Here, we will explain the procedures for installation, complete backup (backing up hard disk contents in case Windows cannot be booted), and complete restore (recovering the computer to its condition at the time of the complete backup). For further information, refer to the softwares online manual ( page 19). CAUTION

All operations should be executed with the AC adaptor connected. Do not turn the power off while operations are in progress. If the power is turned off while installation, backup, or restore operations are in progress, these opera-

tions may not function properly, and it may be impossible to start Windows. Also, do not press any keys or switches, including hot keys.

When restarting the computer, the message [Check le system on C:] will appear. Follow the on-screen instruc-

tions. Do not skip the check process.

Make sure you allow enough space on the hard disk when choosing settings during installation. To charge these settings you must reinstall Recover Pro. You can choose [Typical] to allow 1/2 of the disk for backup or [Custom] to increase the size of the area.

Some software (security software, backup software, etc.) may be incompatible with Recover Pro. For details, please refer to http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/Recover+Pro/default.htm. Installation 1 2 3 4 Log on to Windows as an Administrator. Close all programs. Click [start] - [Run], enter [C:\util\rcvpro\setup.exe], and click [OK]. The InstallShield Wizard screen appears. Click [Next]. Follow the on-screen instructions. Carefully read the License Agreement, and select I accept the agreement.

The computer restarts several times to complete installation. CAUTION

During the installation, the screen may become black (no display) momentarily. This is not a malfunction.

When executing a [Typical] installation on a drive with multiple partitions, the backup area is created using the space of the drive you selected. the backup area is created using the space of the drive which has a larger empty space. the backup area is created using the entire space of all drives.

If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the back-

up area.

You cannot change the size of backup area after creation. NOTE

You can choose [Typical] to allow 1/2 of the disk for backup or [Custom] to increase the size of the area for quick backup and complete backup. 18 Complete backup Backs up all data on the hard disk. 1 2 3 Log on to Windows as an Administrator. Close all programs. Double-click Recover Pro 6 screen appears.

Alternatively you can click [start] - [All Programs] - [Phoenix Applications] - [Phoenix Recover Pro 6]. Click [Complete Backup], and click [Yes].

The computer restarts, and Recover Pro 6 screen appears. Follow the on-screen instructions. on the desktop. 4 NOTE

You can completely backup only one hard disks worth of data to the backup area. Complete restore This function uses the data created during complete backup. It restores the computer to the condition it was in when you performed the complete backup. 1 Turn on or restart the computer, and press F4 several times while [Panasonic] boot screen is displayed.

Always screen appears. Click [Protect / Recover], and click [Phoenix Recover Pro 6].

Recover Pro 6 screen appears. Click [Complete Restore]. Follow the on-screen instructions. 2 3

To access the online manual Click [start] - [All Programs] - [Phoenix Applications] - [Docs] - [UsersGuides] - [UG_RecoverPro6_En_EN] /

[UG_PhoenixAlways_En_EN]. n o i t a m r o f n I l u f e s U 19 Hard Disk Data Erase Utility When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special software. Use the hard disk data erase utility to erase the data completely. Note that transferring of the ownership without uninstalling the commercial software will be a violation of the softwares license agreement. The hard disk data erase utility erases the data using overwriting method. If a malfunction or other operational error occurs during the erasing process, the data may not be completely erased. Also there may be special devices to read the erased data. To erase highly con dential data, ask a specialized company. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility. CAUTION

The backup data will be erased.

When the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well. NOTE

Even if hard disk data erase is performed, the number of times of DVDs region code setting will not be reset. Preparation

Prepare the following items:

n o i t a m r o f n I l u f e s U 1 2 3 4 5 6 7

The Product Recovery DVD-ROM (included)

Panasonic CD/DVD drive for the multimedia pocket (optional) (refer to recent catalogs and other sources for information about the products available) Reference Manual Multimedia Pocket).

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until hard disk data erase is complete. Turn off the computer and insert the CD/DVD drive into the multimedia pocket

( Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. Select the [Boot] menu, then select [IDE MP] and press F6 until [IDE MP] is at the top of the boot priority order. Select the [Security] menu and set [DVD Operation] to [Enable]. Set the Product Recovery DVD-ROM into the CD/DVD drive. Press F10. At the con rmation message, select [Yes] and press Enter. The computer restarts. Press 2 to execute [2. [Erase HDD]].

To cancel this operation, press 0. At the con rmation message, press Y. 8 9 When [<<< Start Menu >>>] is displayed, press Enter. The approximate time required for erasing data will be displayed. 10 Press Space. At the con rmation message, press Enter. The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted.]

message will appear. If a problem has occurred during the operation, an error message will appear.

To cancel partway, press Ctrl + C. The data erasure will be up to that point. 11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter. 20 Reinstalling Software When you reinstall the software, the hard disk data will be erased. Back up important data to other media or an exter-

nal hard disk before reinstallation. Reinstalling software will return the computer to the default condition. The hard disk backup area and the backup data ( page 18) will be erased. (If you reinstall Windows in the rst partition, the backup area and data will not be erased.) Even if the data is stored in partitions on the hard disk, it may be erased or corrupted. Preparation

Prepare the following items:

The Product Recovery DVD-ROM (included)

Panasonic CD/DVD drive for the multimedia pocket (optional) (refer to recent catalogs and other sources for information about the products available)

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until reinstallation is complete. CAUTION

When you use Recover Pro, copy data in the Recover Pro backup area to a removable disc or another storage medium and uninstall Recover Pro before reinstalling the software. When you reinstall Recover Pro without deleting the backup area, the backup area may disappear or installing the software may become impossible on the following occasion. NOTE

Even if reinstallation is performed, the number of times of DVDs region code setting will not be reset. 1 2 Reference Manual Multimedia Pocket). Turn off the computer and insert the CD/DVD drive into the multimedia pocket

( Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 3 Write down all of the contents of the Setup Utility and press F9. 4 5 6 7 8 At the con rmation message, select [Yes] and press Enter. Select the [Boot] menu, then select [IDE MP] and press F6 until [IDE MP] is at the top of the boot priority order. Select the [Security] menu and set [DVD Operation] to [Enable]. Set the Product Recovery DVD-ROM into the CD/DVD drive. Press F10. At the con rmation message, select [Yes] and press Enter. The computer will restart. Press 1 to execute [1. [Recovery]]. The License Agreement screen appears.

To cancel partway, press 0. Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!]. 9 10 Select the settings.

[2]: Enter the size of operating system partition and press Enter. You cannot create the hard disk backup area if you select [2].

(The size of data partition will be determined by subtracting the operating system partition size from the maximum size.)

[3]: Windows will be installed in the rst partition.

(The size of the rst partition must be 20 GB or more. If smaller, installation will not be possible.) At the con rmation message, press Y. Reinstallation starts automatically. (It will take approximately 20 minutes.)

Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Oth-

erwise reinstallation may become unavailable as Windows may not start up or the data may be corrupted. 11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter. n o i t a m r o f n I l u f e s U 21 Reinstalling Software 12 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-

played. The Setup Utility starts up.

If the password is requested, enter the Supervisor Password. 13 Press F9. At the con rmation message, select [Yes] and then press Enter. The Setup Utility settings excluding the password(s) will return to the default values. 14 Select the [Exit] menu and then select [Save Current Values], then press Enter. At the con rmation message, select [Yes] and press Enter. 15 Turn the computer off by using the power switch.

If additional instructions are included with the computer, be sure to read them. It may be necessary to per-

form additional operations during the following procedure. 16 Perform the rst-time operation ( page 13). 17 Start the Setup Utility and change the settings as necessary.

To change the drive letter of hard disk or CD/DVD drive NOTE

Drive letters can be changed only when two or more partitions have been created on the hard disk drive.

The name of the C: drive cannot be changed.

Change the drive letters before installing applications. A Click [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools], and double-click [Com-

puter Management]. B Click [Disk Management] from [Storage]. C Right-click the hard disk partition or the CD/DVD drive name, and click [Change Drive Letter and Paths...]. D Click [Change...]. E Click [Assign the following drive letter] and the new drive letter, and then click [OK]. At the con rmation message, click [Yes]. n o i t a m r o f n I l u f e s U 22 Error Code/Message Follow the instructions below when an error message or code appears. If the problem persists or if the error code/mes-

sage is not shown here, contact Panasonic Technical Support ( page 32). Error Code/Message 0211 Keyboard error 0251 System CMOS checksum bad -

Default con guration used 0271 Check date and time settings 0280 Previous boot incomplete - Default con guration used Press <F2> to Setup 0613: Serial Port*1 con-

guration changed 0614: Serial Port*1 con g. error - device disabled

*1 A or B appears here to indicate the name of the con ict-

ing port. Operating System not found Solution

Disconnect external keyboard or mouse. An error has occurred in the memory of Setup Utility settings. This occurs when the memory content is changed by an unexpected program operation, etc.

Start the Setup Utility and return the settings to the default values, and then change the settings as necessary.

If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 32). The date and time settings are not correct.

Start the Setup Utility and set the correct date and time.

If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 32). Startup has failed repeatedly, so the Setup Utility settings have been returned to the default values to startup the computer.

Start the Setup Utility and return the settings to the default values, and then change the settings as necessary.

Write down the error details and press F2 to start the Setup Utility. Change the settings if necessary. The I/O and IRQ settings of the serial ports are in con ict.

Run the Setup Utility and in the [Advanced] menu, change the ports settings so there is no con ict. The operating system is not installed in the oppy disk or the hard disk that you are going to boot from.

If using a oppy disk, change the disk to the one you can use for boot.

If using the hard disk, check if the hard disk is recognized in [Information] menu of the Setup Utility. If the hard disk is recognized, perform the reinstallation ( page 21). If not, contact Panasonic Technical Support ( page 32).

If a device is connected to the ExpressCard slot or the USB port, disconnect the device, or set [ExpressCard Slot], [USB Port] or [Legacy USB Support] to [Disable] in the [Ad-

vanced] menu of the Setup Utility. g n i t o o h s e b u o r T l Extended RAM Module Failed When the extended RAM module is not inserted correctly or the extended RAM module is not conforming to the computers speci cations, so a beep will sound and the Extended RAM Module Failed message will be displayed when you turn the power on.

Slide the power switch for four seconds or longer to turn off the computer, con rm that the extended RAM module conforms to the speci cations, and reinsert it.

To start the Setup Utility A Restart the computer. B Press F2 several times while [Panasonic] boot screen is displayed. 23 Troubleshooting (Basic) Reference Manual Troubleshooting (Advanced)). Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the Reference Manual. For a software problem, refer to the softwares instruction manual. If the problem persists, contact Panasonic Technical Support ( page 32). You can also check the computers status in the PC Information Viewer

Starting Up Cannot start up. The power indicator or bat-

tery indicator is not lit.

Connect the AC adaptor.

Insert a fully charged battery.

Remove the battery pack and the AC adaptor, then connect them again.

If a device is connected to the ExpressCard slot or the USB port, disconnect the device, or set [ExpressCard Slot], [USB Port] or [Legacy USB Support] to [Disable] in the [Ad-

vanced] menu of the Setup Utility. The power is turned on but Warming up the system (up to 30 minutes) appears.

The computer is warming up before start up. Wait for the computer to start up (takes up to 30 minutes). If, Cannot warm up the system is displayed, the computer failed to warm up and does not start. In this case, turn off the computer, leave it in an envi-

ronment of 5 C {41 F} or higher temperature for about an hour, and then turn on the power again.

Leave it in an environment of 5 C {41 F} or higher temperature for about an hour, then turn on the power again. Cannot turn on the comput-

er. The computer does not re-

sume from standby.

(The power indicator blinks quickly in green.) You have forgotten the pass-

word. Remove disks or other media. Press any key to restart or a similar message appears. Windows startup and opera-

tion is slow. g n i t o o h s e b u o r T l The date and time are incor-

rect.

[Executing Battery Recali-

bration] screen appears.

[Enter Password] does not appear when resuming from standby/hibernation. 24

Supervisor Password or User Password: Contact Panasonic Technical Support ( page 32).

Administrator password:

If you have a password reset disk, you can reset the administrator password. Set the disk and enter any wrong password, then follow the on-screen instructions and set a new password.

If you do not have a password reset disk, reinstall ( page 21) and set up Windows, and then set a new password.

A oppy disk is in the drive and it does not contain system startup information. Remove the oppy disk and press any key.

This message may appear with some devices connected to the ExpressCard slot or the USB port. Remove the device, or set [ExpressCard Slot], [USB Port] or [Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If the problem persists after removing the disk, it may be a hard disk failure. Contact Panasonic Technical Support ( page 31).

Press F9 in the Setup Utility ( page 23 To start the Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again. (Note that the processing speed depends on the applica-

tion software, so this procedure may not make Windows faster.)

If you installed a resident software after purchase, turn off the residence.

Disable Indexing Service in the following menu. Click [start] - [Search] - [Change preferences] - [Without Indexing Service]

Make the correct settings. Click [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time].

If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support ( page 32).

When the computer is connected to LAN, check the date and time of the server.

The 2100 A.D. or later year will not be correctly recognized on this computer.

The Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn on.

To display [Enter Password] at resuming, set the Windows password. The password you have set in the Setup Utility is not requested at resuming. A Click [start] - [Control Panel] - [User Accounts] and select the account, and set the password. B Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -

[Advanced] and add a check mark for [Prompt for password when computer resumes from standby].

Starting Up Cannot resume. Other startup problems.

Entering Password On the [Enter Password]

screen, a beep sounds and the password cannot be entered. Even after entering the pass-

word, [Type your password]

is displayed again.

Shutting down Windows does not shut down.

Display No display. The screen is dark. The LCD brightness chang-

es a number of times when the AC adaptor is discon-

nected. Image colors are not repro-

duced as expected when displaying photographs or other images.

An error may occur when the computer automatically enters the standby or hibernation mode while the screensaver is active. In this case, turn off the screensaver or change the pattern of the screensaver.

Press F9 in the Setup Utility ( page 23 To start the Setup Utility) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.

Remove all peripheral devices.

Check to see if there was a disk error. A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties]. B Click [Tools] - [Check Now]. C Select the option in [Check disk options] and click [Start].

Start the computer in Safe Mode and check the error details. When the [Panasonic] boot screen disappears*1 at startup, press and hold F8 until the Windows Advanced Options Menu is displayed.

*1 When [Password on boot] is set to [Enable] in the [Security] menu of the Setup Utility,

[Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you enter the password and press Enter, press and hold F8.

The computer may be in ten-key mode. If the NumLk indicator input. lights, press NumLk to disable the ten-key mode, and then

The computer may be in ten-key mode.

The computer may be in Caps Lock mode. If the NumLk indicator input. If the Caps Lock indicator mode, and then input. lights, press NumLk to disable the ten-key mode, and then lights, press Caps Lock to disable the Caps Lock

Remove the USB device and the ExpressCard.

Wait one or two minutes. It is not a malfunction.

The external display is selected. Press Fn + F3 to switch the display. Wait until the display has been switched completely before pressing Fn + F3 again.

When using an external display,

Check the cable connection.

Turn on the display.

Check the settings of external display.

The display is turned off by the power-saving function. To resume, do not press the direct selection keys, but press any other key like Ctrl.

The computer entered standby or hibernation by the power-saving function. To resume, slide the power switch.

The screen is darker when the AC adapter is not connected. Press Fn + F2 and adjust the brightness. As you increase the brightness, battery consumption increases. You can separately set the brightness for when the AC adaptor is connected and when not connected.

Intel(R) Display Power Saving Technology is active and automatically changes the LCD brightness. This is not a malfunction.

Remove the check mark of [Intel(R) Display Power Saving Technology]. A Select [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile]. B Select [Display Settings] - [Power Settings]. g n i t o o h s e b u o r T l 25 Troubleshooting (Basic)

Display The screen is disordered. During Simultaneous display, one of the screens becomes disordered.

Changing the number of display colors and resolution may affect the screen. Restart the

Connecting/disconnecting an external display may affect the screen. Restart the com-

When using Simultaneous display, set the same display colors for the external display computer. puter. as those for the LCD.

When using Simultaneous display, do not press Fn + F3.

Enable or disable Simultaneous display, and soon restart the computer.

When using the Extended Desktop, use the same display colors for the external display as those used by the LCD.

If you continue to experience problems, try changing the display by clicking [start] -

[Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] - [Dis-

play Devices]

When the [Command Prompt] is set to Full Screen by pressing Alt + Enter, the picture is displayed on one of the screens only. When the window display is restored by pressing Alt + Enter, the picture is displayed on both screens.

Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.). The external display does not work normally.

If the external display does not support the power saving function, it may not work nor-

mally when the computer enters the power saving mode. Turn off the external display.

Touch Pad / Touchscreen (only for model with touchscreen) The cursor does not work.

When using the external mouse, connect it correctly.

Restart the computer using the keyboard.

(Press

, U, and R to select [Restart].)

If the computer does not respond to keyboard commands, read No response ( be-

low). Cannot input using the touch pad. Cannot input using the touchscreen. Cannot point the correct position using the included stylus.

Reference Manual The Reference Manual is not displayed. g n i t o o h s e b u o r T l

Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.

The drivers for some mice may disable the touch pad. Check your mouses operating instructions.

When mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work. Reinstall the touchscreen driver.

Perform the touchscreen calibration ( page 14).

Install Adobe Reader. A Log on to Windows as an administrator. B Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK]. C Follow the on-screen instructions. 26

Recover Pro Cant install Recover Pro An unnecessary backup re-

gion is present (is left) when Recover Pro is not installed.

Others No response.

Recover Pro cannot be installed when a backup region is remaining on the hard disk. Try one of the following methods:

If the data in the backup region is not needed, is corrupted, or does not include com-

A Access [http://www.phoenix.com/en/Customer+Services/Utilities/

plete backup data:

Recover+Pro+6.htm#Where], and download/install Cleanup Utility for Recover Pro 6. B Delete the backup region using Cleanup Utility for Recover Pro 6. C Reinstall Recover Pro. In this case, all data in the backup region will be lost.

If you do not need the data in the backup area, or if it is corrupted, or if does not in-

A Follow the Complete Restore instructions in Recover Pro 6 ( page 19) to re-

clude complete backup data:

store the data.

If the backup area has complete backup data and you want to restore that data:

A Reinstall the software ( page 21).

- In step 10, do not select 3. Reinstall Windows to the rst partition. A Access [http://www.phoenix.com/en/Customer+Services/Utilities/

Recover+Pro+6.htm#Where], and download/install Cleanup Utility for Recover Pro 6. B Delete the backup region using Cleanup Utility for Recover Pro 6.

Press Ctrl+Shift+Esc to open Task Manager and close the software application that is not responding.

An input screen (e.g., password input screen at startup) may be hidden behind another window. Press Alt+Tab to check.

Slide the power switch for four seconds or longer to shut down the computer, and then slide the power switch to turn it on. If the application program does not work normally, uninstall and reinstall the program. To uninstall, click [start] - [Control Panel] - [Add or Remove Programs]. g n i t o o h s e b u o r T l 27 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PROD-

UCT) ARE LICENSED ONLY TO THE END-USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise obtained the Programs and hereby licenses their use to you. You assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of which title, ownership and rights shall remain with MEI or its suppliers. B. You may use the Programs only on the single Product which was accompanied by the Programs. C. You and your employees and agents are required to protect the con dentiality of the Programs. You may not distrib-

ute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-

wise, without the prior written consent of MEI. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or at-

tempt to modify, the Programs. E. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. F. You may not remove any copyright, trademark or other notice or product identi cation from the Programs and you must reproduce and include any such notice or product identi cation on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-

MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. x i d n e p p A TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may termi-

nate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RE-

STRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intels proprietary rights in the product. 28 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles cides-

sous. En utilisant les logiciels, vous vous engagez de manire d nitive respecter les termes, clauses et conditions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. MEI vous octroie par les prsentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les Logiciels conformment aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algorithmes, concepts, dessins, con gurations et ides reprsents par ou incorpors dans les Logiciels et la documentation les accompagnant, dont les titres, proprit et droits resteront tous MEI ou leurs propritaires. B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagn par les Logiciels. C. Vous et vos employs ou agents tes requis de protger la con dentialit des Logiciels. Vous ne pouvez ni dis-

tribuer ni mettre les Logiciels et la documentation les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de MEI. D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documenta-

tion les accompagnant pour quelque n que ce soit, lexception dune (1) copie des Logiciels des ns de sau-

vegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modi er ni tenter de modi er les Logiciels. E. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accompagnant, la mme partie ou dtruire les copies non cdes. F. Vous ne pouvez retirer aucune marque de droits dauteur, marque de commerce ou autre ni aucune identi cation de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identi cations de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs cop-

ies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modi er, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation an-

trieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation d nies ailleurs dans ce contrat se sont ralises ou si vous ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. x i d n e p p A Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre commu-

nication entre nous, relativement lobjet du prsent contrat. 29 Speci cations This page provides the speci cations for the basic model CF-30CTQAZBM/CF-30CTQBZBM/CF-30CTQDZBM/CF-

30CTQHZBM/CF-30CTQMZBM/CF-30CWQZZBM/CF-30CAQZZBM/CF-30CTQZXBM/CF-30CTQZABM/

CF-30CTQZBBM/CF-30CTQZDBM. The model number is different according to the unit con guration.

To check the model number:

Check the bottom of the computer or the box the computer came in at the time of purchase.

To check CPU speed, memory size and the hard disk drive (HDD) size:

Reference Manual Setup Utility) and select [Information] menu. Run the Setup Utility (

[CPU Speed]: CPU speed, [System Memory]: Memory size, [Hard Disk]: Hard disk drive size PC Card ExpressCard SD Memory Card*9 x 1, Data transfer rate = 8 MB per second*10 Smart Card*11

Main Speci cations Model No. CPU Chipset Memory*1 Video Memory*1*2 Hard Disk Drive*3 Display Method Internal LCD*4 External Display*5 Wireless LAN*6 Bluetooth*7 LAN Modem Sound Security Chip Card Slot RAM Module Slot Interface Power on Keyboard / Pointing Device Power Supply AC Adaptor*12 Battery Pack Operating Time*13*14 Charging Time*18 Clock Battery Power Consumption*17 Physical Dimensions (W H D)

(including the carrying handle) Weight

(including the carrying handle) Operation Environment Storage Environment x i d n e p p A 30 CF-30CTQAZBM/CF-30CTQBZBM/CF-30CTQDZBM/CF-30CTQHZBM/CF-30CTQMZBM/

CF-30CWQZZBM/CF-30CAQZZBM/CF-30CTQZXBM/CF-30CTQZABM/CF-30CTQZBBM/

CF-30CTQZDBM Intel Core Duo Processor T2400 (1.66 GHz, 2 MB*1 L2 cache, 667 MHz FSB) Intel 945GM 512 MB (4096 MB Max.) UMA (128 MB Max.) 80 GB 13.3 XGA type (TFT) with Touchscreen 65,536/16,777,216 colors (800 600 dots/1024 768 dots/1280 768 dots/1280 1024 dots)

page 31 Version 2.0+EDR IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Data: 56 kbps (V.92) FAX: 14.4 kbps WAVE and MIDI playback, Stereo speaker, intel High De nition Audio subsystem support TPM (TCG V1.2 compliant)*8 Type I or Type II x 1 (3.3 V: 400 mA, 5 V: 400 mA) ExpressCard/34 or ExpressCard/54 x 1 x 1 200-pin, 1.8 V, SO-DIMM, DDR2 SDRAM, PC2-4200 Compliant USB port (4-pin, USB 2.0) x 3, Serial Port (Dsub 9-pin male), Modem port (RJ-11), LAN port

(RJ-45), External display port (Mini Dsub 15-pin female), Expansion Bus Connector (Dedicated 80-pin female), External Antenna Connector (Dedicated 50 coaxial connector), IEEE 1394a Interface Connector (4-pin x 1), Microphone Jack (Miniature jack, 3.5 DIA, Stereo), Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW 2) 87 keys / Touch Pad / Touchscreen (Anti-Re ection, Stylus (included) touch capable) AC adaptor or Battery pack Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 8.0 A Li-ion 11.1 V, 7.8 Ah Approx. ? hours to ? hours*15 (Approx. ? hours*16) Approx. ? hours Coin type lithium battery 3.0 V Approx. 40 W*18 / Approx. 80 W (Maximum when recharging in the ON state) 302 mm 67.5 - 69.5 mm 285 mm {11.9" 2.7 - 2.8" 11.3"}

Approx. 3.7 kg {Approx. 8.2 lb.}

Temperature: 5 C to 35 C {41 F to 95 F}

Humidity: 30% to 80% RH (No condensation) Temperature: -20 C to 60 C {-4 F to 140 F}

Humidity: 30% to 90% RH (No condensation)

Main Speci cations Operating System Utility Programs Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies

(NTFS File System) DMI Viewer, Microsoft Windows Media Player 10, Adobe Reader, PC Information Viewer, SD Utility, Icon Enlarger, Loupe Utility, Intel Matrix Storage Manager, Intel PROSet/Wireless Soft-

ware*6 , Bluetooth Stack for Windows by TOSHIBA*7 , Wireless Switch Utility, Hotkey Set-

tings, Battery Recalibration, LAN Power-Saving Utility, In neon TPM Professional Package*19, Recover ProTM 6*19 Setup Utility, Hard Disk Data Erase Utility*20

Wireless LAN <Only for model with wireless LAN>

Intel PRO / Wireless 3945 ABG (802.11 a + b + g) PCI Ex. 1/4 Data Transfer Rates*21 Standards Supported Transmission method Wireless Channels Used RF Frequency Band IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched) IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched) IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched) IEEE802.11a/IEEE802.11b/IEEE802.11g OFDM system, DSSS system IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165 IEEE802.11b/IEEE802.11g: Channels 1 to 11 IEEE802.11a: 5.18-5.32 GHz, 5.745-5.825 GHz IEEE802.11b/IEEE802.11g: 2.412-2.462 GHz

*1 1MB = 1,048,576 bytes

*2 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user.

*3 1GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB.

*4 A 16,777,216 color display is achieved by using the dithering function.

*5 Maximum resolution depends on the speci cations of the external display.

*6 Only for model with wireless LAN

*7 Only for model with Bluetooth

*8 For information on TPM, click [start] - [Run] and input c:\util\drivers\tpm\README.pdf, and refer to the Installation Manual of Trusted Platform Module (TPM).

*9 Operation has been tested and con rmed using Panasonic SD Memory Cards with a capacity of up to 2 GB. This computer is not compatible with SDHC Memory Cards with a capacity of 4 GB or more. The transfer rate using the SD Memory Card slot on this computer is 8 MB per second. (This is a theoretical value, and differs from actual speeds.) The transfer rate is 8 MB per second even if you use an SD Memory Card that supports high-speed transfer rates. Operation on other SD equipment is not guaranteed. Do not insert these kinds of cards.

*10 Theoretical value and not the actual speed. The transfer rate does not become higher even if you use a card that supports the This computer is not compatible with MultiMediaCards or SDHC Memory Cards.

*11 Only for model with Smart Card slot

*12 The AC adaptor is compatible with power sources up to 240 V AC adaptor. The computer is supplied with a 125 V AC compat-

higher transfer rate. ible AC cord. 20-M-2-1

*13 Varies depending on the usage conditions.

*14 Measured with the LAN Power-saving functions Auto-off setting set to 1 minute.

*15 Measured using BatteryMark Version 4.0.1 (LCD brightness: Maximum - Minimum)

*16 Measured using MobileMark 2002 (LCD brightness: 60 cd/m2)

*17 Approx. 1.0 W when the battery pack is fully charged (or not being charged) and the computer is OFF. Approx. 2.0 W when the Wake up from LAN has been enabled.

*18 Rated power consumption 23-E-1

*19 You need to install to use the feature.

*20 The Product Recovery DVD-ROM is required.

*21 These are speeds speci ed in IEEE802.11a+b+g standards. Actual speeds may differ. x i d n e p p A 31 LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are covered for a period of one (1) year from the date of purchase. This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be re-

quired before warranty performance is rendered. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modi cation or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of ight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are de ned by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Lea ets) No.36 Limits and Exclusions:

There are no other express warranties except as listed below. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RE-

SULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you speci c legal rights, and you may also have other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the prob-

lem is not handled to your satisfaction, then write to the Consumer Affairs Division at the address indicated below. SOFTWARE LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonics entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the pur-

chase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media otherwise than on the Product or in environmental conditions other than those speci ed by Panasonic by alteration, accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modi cation of damage that is attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modi ed, or attempted to modify any Program. DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS. PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITH-

OUT LIMITATION, ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIP-

MENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you speci c legal rights, and you may also have other rights which vary from state to state. This Limited Warranty will be governed by the laws the State of New York, without regard to its con ict-of-laws rules. To obtain service or technical assistance within the continental U.S.A. and Alaska

DIAL TOLL FREE: 1-800-LAPTOP5 Correspondence requesting product information should be sent to:

Panasonic Computer Solutions Company 50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094 32 x i d n e p p A For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Type of Failure Coverage Defective Materials or Workman-

ship Defective Materials or Workman-

ship Period of Coverage Three (3) Years from Date of Origi-

nal End User Customer Purchase One (1) Year from Date of Original End User Customer Purchase Coverage Panasonic Canada Inc. (PCI) warrants to you, the rst end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage speci ed. Scope of Coverage Whole Product (except Batteries), AC adaptor and CD-

ROM (if factory installed) Batteries, CD-ROM (unless factory installed), Port Repli-

cator, Extra Memory Modules and all other Peripherals, Options and Accessories Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, intro-

duction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of ight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are de ned by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Lea ets) No.36 Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original pur-

chase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE SOFTWARE MEDIA LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the rst end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or pro t loss, or special, indirect or conse-

quential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those speci ed by PCI or the manufacturer, or if subjected to misuse, neglect, mishan-

dling, modi cation or attempted modi cation of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RE-

SPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROF-

IT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. x i d n e p p A 33 MEMO 34 35 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy ef ciency. Outline of the International ENERGY STAR Of ce Equipment Program The international ENERGY STAR Of ce Equipment Program is an international program that promotes energy saving through the use of computers and other of ce equipment. The program backs the development and dis-

semination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are of ce equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. 22-E-1 Panasonic Computer Solutions Company 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan HS0906-0 DFQX5622ZA