FCC ID: ACJ9TGWW18B Radio Module

OPERATING INSTRUCTIONS Read Me First Personal Computer Model No. CF-20 series Contents Read Me First Safety Precautions .........................................2 Regulatory Information ...................................7 t s r i F e M d a e R Getting Started First-time Operation .....................................15 Detaching the tablet from the keyboard base ....20 Attaching the tablet to the keyboard base ....22 d e t r a t S g n i t t e G n Terms and illustrations in these instructions In these instructions, the names and terms are referred as follows.

: Conditions that may result in minor or moderate injury. CAUTION NOTE Windows 10 Pro 64-bit as Windows or Windows 10 This manual explains operation procedures using the touchpad or mouse as typical exam-

: Useful and helpful information. ples. In addition, you can touch the display screen to operate the computer. When using the touch operation, please replace the terms as described below, and read the instructions. Operation terms to be replaced:

- Click Touch

-

:

:

(Settings): Click

(Start) and then click

(Settings). Page in these Operating Instructions. Reference to the on-screen manuals. Please read these instructions carefully before using this product, and save this manual for future use. The above illustration is that is attached the keyboard base. Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to clas-

sify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could re-

sult in serious injury or death. CAUTION Denotes a hazard that could result in mi-

nor injury. NOTICE Denotes a hazard that could result in property damage. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safety. 2 DANGER Precautions on the Battery Pack Electrolyte leakage, generation of heat, ig-

nition or rupture of the Battery Pack may result. nDo Not Throw the Battery Pack into a Fire or Expose It to Exces-

sive Heat nDo Not Deform, Disassemble, or Modify the Battery Pack nDo Not Short the Positive (+) and Negative (-) Contacts Do not place the battery pack together with articles such as necklaces or hairpins when car-

rying or storing. nDo Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. If this product is subjected to a strong impact, damaged or deformed, stop using it immedi-

ately. nDo Not Charge the Battery Us-

ing Methods Other Than Those Specified nDo Not Use the Battery Pack with Any Other Product The battery pack is rechargeable and was intended for the speci-

fied product. nDo Not Use This Product with a Battery Pack Other Than the One Specified Use only the specified battery pack with your product. nDo not use battery pack if wet nAvoid Extreme Heat (Near the Fire, in Direct Sunlight, for Ex-

ample) nWhen the Battery Pack Has Dete-

riorated or If Abnormal Swelling Occur, Replace It with New One Do not continue to use a damaged battery pack. Read Me First n Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example) n When the Built-in Bridge Battery Has Deteriorated or If Abnormal Swelling Occur, Contact Your Technical Sup-

port Office to Replace the Battery Fire or electric shock may result. n Do Not Do Anything That May Dam-

age the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy ob-

jects on it, or bundle it tightly. Do not continue to use a dam-

aged AC cord, AC plug and AC adaptor. Contact your technical support office for repair. n Do Not Connect the AC Adaptor to a Power Source Other Than a Stan-

dard Household AC Outlet Connecting to a DC/AC converter

(inverter) may damage the AC adap-

tor. On an airplane, only connect the AC adaptor/charger to an AC outlet specifically approved for such use. n Do Not Pull or Insert the AC Plug If Your Hands Are Wet n Do Not Disassemble This Product n Do Not Touch This Product In a Thunderstorm If Connected with the AC Cable or Any Other Cables n Do Not Place Containers of Liquid or Metal Objects on Top of This Prod-

uct If foreign matter has found its way inside, immediately turn the power off and unplug the AC plug (and remove the battery pack). Then contact your techni-

cal support office. Precautions on the Built-in Bridge DANGER Battery (for disposal)

<Only for model with Built-in Bridge Bat-

tery>

When disposing the battery, generation of heat, ignition or rupture of the Built-in Bridge Battery may result.

( OPERATING INSTRUCTIONS - Basic Guide) Handling This Computer nDo Not Disassemble the Comput-

er Except When Disposing Handling the Built-in Bridge Battery nDo Not Short the Positive (+) and Negative (-) Contacts nDo Not Throw the Battery into a Fire or Expose It to Excessive Heat nDo Not Apply Shocks to the Built-in Bridge Battery by Drop-

ping It, Applying Strong Pres-

sure to It, etc. nDo Not Charge nDo Not Use nDo Not Deform, Disassemble, or Modify the Built-in Bridge Bat-

tery nAvoid Extreme Heat (Near the Fire, in Direct Sunlight, for Ex-

ample) WARNING

<Only for model with Built-in Bridge Bat-

tery>

Generation of heat, ignition or rupture of the Built-in Bridge Battery may result. n Do Not Throw This Product Into a Fire or Expose It to Excessive Heat n Do Not Insert Sharp Objects Into This Product, Disassemble, or Modify It n Do Not Apply Shocks to the Prod-

uct by Dropping It, Applying Strong Pressure to It, etc. n Do Not Charge the Battery Using Methods Other Than Those Speci-

fied 3 Read Me First Safety Precautions WARNING n If a Malfunction or Trouble Occurs, Immediately Stop Use If the Following Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot After the above procedure, con-

tact your technical support office for repair. n Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris accumu-

lates on the plug, humidity, etc. may cause a defect in the insula-

tion. n Insert the AC Plug Completely Do not use a damaged plug or loose AC outlet. n Close the Connector Cover Tightly When Using This Product Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. If foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support office. Burns or low-temperature burns may result. n Do Not Use This Product in Close Contact With Your Body For a Long Period of Time Do not use this product with its heat-emitting parts in close contact with your body for a long period of time. Low-temperature burns may result. n Do Not Touch The Surface of The AC Adaptor Continuously While Using/Charging Burns may result. n Do Not Place the Product in a Bag or Case While It is Turned On Doing so may cause the product to overheat and result in burns. 4 Detrimental health effects on your body may result. n Do Not Turn the Volume Up Too Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. CAUTION Fire or electric shock may result. n Do Not Move This Product While the AC Plug Is Connected If the AC cord is damaged, un-

plug the AC plug immediately. n Do Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, Into the LAN Port Do not connect to a network such as the ones listed below. Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-

premise switches), digital public phones, etc.) n Do Not Subject the AC Adaptor To Any Strong Impact Do not continue to use the AC adaptor after a strong impact such as being dropped. Contact your technical support office for repair. n Do Not Leave This Product in High Temperature Environment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Read Me First NOTICE l Do not place the computer near a television or radio receiver. l Keep the computer away from magnets. Data stored on the flash memory may be lost. l This computer is not intended for the display of images for use in medical diagnosis. l This computer is not intended for a use with connection of medical equipment for the pur-

pose of medical diagnosis. l Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. l Do not touch the terminals on the battery pack. The battery pack may no longer function prop-

erly if the contacts are dirty or damaged. l Do not expose the battery pack to water, or al-

low it to become wet. l If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the re-

maining battery level becomes 30% to 40% and store it in a cool, dry place. l This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity. l The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. l Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doc-

tor for medical treatment as soon as possible. Fire or electric shock may result. n Hold the Plug When Unplugging the AC Plug n Use Only the Specified AC Adaptor With This Product Do not use an AC adaptor other than the one supplied (supplied with the unit or one sold sepa-

rately as an accessory). This product may fall over or drop, result-

ing in an injury. n Do Not Place This Product on Un-

stable Surfaces n Avoid Stacking n When Carrying the Computer, Attach the Main Unit To the Keyboard Base Tightly Until Red Signs Under the Detach Lock And Release Lever Are Concealed. Detrimental health effects on your body may result. n Take a Break Of 10-15 Minutes Every Hour Using this product for long peri-

ods of time may have detrimen-

tal health effects on the eyes or hands. Burns, low-temperature burns, or frostbite may result. n Do Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment When it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest time possible. 5 Read Me First Safety Precautions NOTE l The battery pack may become warm during recharging or normal use. This is completely normal. l Recharging will not commence if internal tem-

perature of the battery pack is outside of the al-

lowable temperature range (0 C to 50 C {32 F to 122 F}). (

OPERATING INSTRUC-

TIONS - Reference Manual Basic Operation Battery Power) Once the allowable range requirement is satisfied, charging begins auto-

matically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50 F} or below.) l If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range. l This computer has a high temperature mode function that prevents the degradation of the battery in high temperature environments. (

OPERATING INSTRUCTIONS - Reference Manual Basic Operation Battery Power) A level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode. l The battery pack is a consumable item. If the amount of time the computer can be run by us-

ing a particular battery pack becomes dramati-

cally shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one. l When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. l Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. l <Only for model with Built-in Bridge Battery>

To minimize deterioration of the built-in bridge battery, connect the computer to the AC adap-

tor and recharge it for approximately 2 hours about once every year. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/

SYSTEMS, AIR TRAFFIC CONTROL EQUIP-

MENT/SYSTEMS, AIRCRAFT COCKPIT EQUIP-

MENT/SYSTEMS*1, MEDICAL DEVICES OR ACCESSORIES*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HU-

MAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RE-

SULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Sys-

tems and Class1 EFB Systems when used dur-

ing critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

*2 As defined by the European Medical Device Directive (MDD) 93/42/EEC. Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g. Flammability/

Smoke/Toxicity/Radio Frequency Emission, etc.) requirements related to aviation standards that exceed the specifications of our COTS (Commer-

cial-Off-The-Shelf) products. This computer is not intended for use in medical equipment including life-support systems, air traffic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. As with any portable computer device precautions should be taken to avoid any damage. The follow-

ing usage and handling procedures are recom-

mended. Before putting the computer away, be sure to wipe off any moisture. 6 Read Me First Regulatory Information Information to the User / Informations destines aux utilisateurs

<Only for model with wireless LAN/Bluetooth>

This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emitted by wireless de-

vices like for example mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recom-

mendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

l Using this product on board of airplanes, or l In any other environment where the risk of interference to other devices or services is perceived or identi-

fied as harmful. 26-M-1 If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environ-

ment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines.

<Uniquement les modles avec rseau local sans fil et/ou Bluetooth>

Ce produit et votre sant Ce produit, comme tout autre appareil radio, met de lnergie radiolectrique. Toutefois, la quantit dnergie mise par ce produit est beaucoup moins importante que lnergie radiolectrique mise par des appareils sans fil tels que les tlphones portables. Lutilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opre dans les limites des directives concernant les normes et les recommandations de scuri-

t sur les frquences radio. Ces normes et recommandations refltent le consensus de la communaut scientifique et rsultent de dlibrations de jurys et comits de scientifiques qui examinent et interprtent continuellement les nouveauts de la vaste littrature sur les recherches effectues. Dans certaines situations ou environnements, luti-

lisation de ce produit peut tre restreinte par le propritaire du btiment ou par les reprsentants responsables de lorganisation. Ces situations peuvent tre les suivantes par exemple :

l A bord dun avion, ou l Dans tout autre environnement o les risques dinterfrence sur dautres appareils ou services sont per-

us ou identifiables comme dangereux. Si vous ntes pas sr de la rglementation applicable lutilisation dappareils sans fil dans une organisa-

tion ou un environnement spcifique, (par exemple dans un aroport) nous vous invitons demander lauto-

risation dutiliser ce produit avant sa mise en marche. Informations concernant la rglementation Nous dclinons toute responsabilit pour toute interfrence radio ou tlvision cause par des modifications non auto-

rises apportes ce produit. La correction dinterfrences causes par de telles modifications non autorises sera la seule responsabilit de son utilisateur. Nousmmes, les revendeurs officiels et les distributeurs ne sommes pas respon-

sable de tout dgt ou de toute violation des rglements de ltat pouvant dcouler du non-respect de ces directives. Camera Light / Lumire de la camra

<For model with rear camera>

26-F-1 CAUTION

- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs with naked eyes.

<Pour les modles munis dune camra arrire>

ATTENTION

- La lumire de la diode LED est forte et peut blesser loeil humain. Ne regardez pas directement les LED avec les yeux non protgs. 57-E-1 57-F-1 7 Read Me First Regulatory Information Lithium Battery / Pile au lithium Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning!

A risk of explosion from incorrect installation or misapplication may possibly occur. 15-E-1 Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre remplace que par un technicien qualifi. Danger ! Risque dexplosion en cas de non respect de cette mise en garde!

15-F-1

<Only for model with Barcode Reader>

Laser Devices This equipment is using lasers that comply with US21CFR1040.10, 1040.11, EN 60825-1:1994+A2:2001+A1:2002 and IEC60825-1:1993+A1:1997+A2:2001 regulations. The laser is a Class 2 laser which is indicated on the label for this product. Class 2 laser readers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. n Labeling/Marking Location of aperture Beam Divergence

- Vertical angle: 30 degree

- Horizontal angle: 36 degree 13-E-1 Battery Pack / Batterie CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. ATTENTION:

Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. 58-E-1 58-F-1 Battery pack model number Recommended charging condition Notice CF-VZSU0Q Series 13.05 V / 1820 mA (Constant voltage/current) Dispose of used batteries according to local ordi-

nances and/or regulations. l Dispose of used built-in battery according to local ordinances and/or regulations. l Do not expose this computer to temperatures greater than 60C {140F}. 8 Read Me First Information for Users on Collection and Disposal of Old Equip-

ment and used Batteries These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 53-M-1 Energy Star As an ENERGY STAR Partner, Panasonic Corporation has determined that this product meets ENERGY STAR guidelines for energy efficiency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy.

<For U.S.A.>

To learn more about power management, please visit the web site:

www.energystar.gov/index.cfm?c=power_mgt.pr_power_management Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equip-

ment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.

<For U.S.A.>

For information about ENERGY STAR, refer to the following web site:

Web Site: www.energystar.gov 22-M-1 Safety Precautions

<Only for model with wireless WAN>

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating person-

nel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Computer incorporating wireless WAN modem off, if in-

structed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating wire-

less WAN modem placed close to the device. If in doubt about potential danger, contact the phy-

sician or the manufacturer of the device to verify that the equipment is properly shielded. Pace-

maker patients are advised to keep their Personal Computer or Handheld Computer incorporating wireless WAN modem away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Computer incorporating wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Fail-

ure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow instruction provided by the airline. 9 Read Me First Regulatory Information Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Op-

eration of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard. Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Handheld Computer incorporat-

ing wireless WAN modem wherever forbidden, or when you suspect that it may cause interfer-

ence or danger. Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporat-

ing wireless WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recom-

mended to stow the unit in the boot or secure stowage area while driving. Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inflate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle. IMPORTANT!

Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls. Remember, in order to make or receive calls, Personal Computer or Handheld Computer incor-

porating wireless WAN modem must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Hand-

held Computer incorporating wireless WAN modem. For U.S.A. Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or pe-

ripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. 10 Read Me First FCC RF Exposure Warning:

l This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specifi cally recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

<Only for model with wireless LAN/wireless WAN/Bluetooth>

l This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. l This equipment may not be collocated or operated with any other antenna or transmitter. l This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio fre-

quency (RF) energy set by the Federal Communications Commission of the U.S. Government. l The exposure standard for wireless device employs a unit of measurement known as the Specifi c Ab-

sorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

* Tests for SAR are conducted using standard operating positions accepted by the FCC with the device trans-

mitting at its highest certifi ed power level in all tested frequency bands. Although the SAR is determined at the highest certifi ed power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at mul-

tiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 25-M-9

<Only for model with wireless LAN>

About FCC ID Number SAR information on this product is on file with the FCC and can be found by searching for the products FCC ID Number at http://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for your product, first remove the battery pack from the tablet. The FCC ID number is printed on the nameplate underneath. Responsible Party: Panasonic Corporation of North America Support Contact:

Two Riverfront Plaza Newark, NJ 07102 http://business.panasonic.com/support-computerstablets 6-M-1 USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website:

http://www.panasonic.com/environmental or call 1-888-769-0149 65-M-2

<US & Canada Only>

A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

<.-U. et Canada seulement>

Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. 48-M-1 For Used in Motor Vehicle / Pour Lutilisation Dans Un Vhicule Motoris Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If used for entertainment purpose, such as television reception or video play, it must be installed to the rear of the drivers seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to determine lawful use of this product while operating within a motor vehicle. Avertissement : Lordinateur bloc-notes peut tre install dans un vhicule motoris et dans le champ de vi-

sion du conducteur uniquement en tant que dispositif daide aux fonctions du vhicule, comme par exemple pour fournir des informations sur le vhicule, comme dispositif de contrle de systme, pour lobservation larrire ou sur les cts du vhicule, ainsi que pour fournir de linformation routire. Pour toute utilisation fin de divertissement, comme par exemple pour regarder la tlvision ou jouer des jeux vido, il doit tre install larrire du sige du conducteur, en un emplacement o il ne sera pas visible, ni directement ni indirectement, pour le conducteur du vhicule motoris. Vrifiez les lois fdrales et nationales qui rgissent lutilisation lgale de cet appareil lintrieur dun vhicule motoris. 35-M-1 11 Read Me First Regulatory Information This product contains a Coin Cell Lithium Battery which contains Perchlorate Material -

special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1 For Canada Canadian ICES-003 CAN ICES-3(B)/NMB-3(B) 7-M-2

<Only for model with wireless LAN/Bluetooth>

ISED Canada This product complies with ISED Canadas licence-exempt RSSs. Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

<Ne sapplique quaux modes avec technologie Bluetooth/LAN sans fil/WAN sans fil>

ISED Canada Cet quipement est conforme aux normes sans licence RSS ISED Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) ce dispositif ne peut produire de brouillage, et

(2) ce dispositif doit accepter le brouillage, y compris le brouillage pouvant entraner le fonctionnement non dsir de lappareil.

<Only for model with wireless LAN>

This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-

5850 MHz and these radars could cause interference and/or damage to LELAN devices. 30-Ca-1-1

<Ne sapplique quaux modes avec technologie LAN sans fil>

Cet appareil (pour rseaux locaux radiolectriques) dans les bandes de frquences 5150-5250 MHz est rervune utilisation lintieur afin de ruire le risque dinterfence avec les systmes satellites mobiles bicanaux. Les radars forte puissance sont dsigns comme tant les premiers utilisateurs (cst--dire quls ont la prio-

rit) des bandes de frquences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer des interfrences et/ou des dommages ce priphrique. 30-Ca-2-1 12 Read Me First<Only for model with wireless LAN/wireless WAN/Bluetooth>

l This computer complies with ISED Canada radiation exposure limits set forth for an uncontrolled envi-

l This PC with WLAN and/or Bluetooth transmitters installed, has been approved for portable operation and does not require any minimum spacing be provided between antennas and all persons body. ronment.

<Ne sapplique quaux modles avec technologie Bluetooth/LAN sans fil/WAN sans fil>

l Cet quipement est conforme aux limites dexposition aux rayonnements ISED Canada tablies pour un environnement non contrl. l Ce PC avec metteurs WLAN et/ou Bluetooth a t approuv des fins dopration mobile ; aucun espace minimum entre les antennes et le corps de lutilisateur nest requis. FOR USE WITH MODEL NO. : CF-AA6413C, CF-AA5713A POUR UTILISER AVEC MODLE : CF-AA6413C, CF-AA5713A 20-Ca-1 13 Read Me First Regulatory Information For Europe

<Only for model with a CE mark on the bottom of the computer>

Declaration of Conformity (DoC) Hereby, Panasonic declares that this Personal Computer is in compliance with the es-

sential requirements and other relevant provisions of the Directive 1999/5/EC. Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our web ad-

dress:

http://www.ptc.panasonic.eu Authorised Representative:

Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 11, 22525 Hamburg, Germany 18-E-0 For Australia For Used in Motor Vehicle Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If the Notebook Computer is to be used for work or entertainment purposes, such as television reception, video play or other work programs, it must be installed in a position where it will NOT:

(a) be visible, directly or indirectly, to the operator of the motor vehicle; or

(b) cause distraction to drivers of other motor vehicles. Check with individual state laws to determine lawful use of this product while operating within a motor ve-

hicle. If the visual display unit is, or is part of, a drivers aid, above rule is not applied. Drivers aid includes closed-circuit television security cameras, dispatch systems, navigational or intelligent highway and vehicle system equipment, rear view screens, ticket-issuing machines and vehicle monitoring devices. 35-A-1 For India Declaration of Conformity with the requirements of the e-waste (Management and Handling) Rules, 2011.

(adopted by Notification S.O.1035(E) of Ministry of Environment and Forests) The Product is in conformity with the requirements of Rule 13 of the e-waste Rules. The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the e-waste Rules:

1. Lead (Pb) - not over 0.1% by weight;

2. Cadmium (Cd) - not over 0.01% by weight;

3. Mercury (Hg) - not over 0.1% by weight;

4. Hexavalent chromium (Cr6+) - not over 0.1% by weight;

5. Polybrominated biphenyls (PBBs) - not over 0.1% by weight;

6. Polybrominated diphenyl ethers (PBDEs) - not over 0.1% by weight. For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler or recycler, or Panasonic service center when disposing of this product. Please see the Panasonic website for further information on collection centers, etc. http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html 68-M-2 14 Read Me First First-time Operation n Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact your support office. AC Adaptor . 1 AC Cord . 1 Battery Pack . 1*1 Model No: CF-AA6413C, CF-AA5713A Soft Cloth . 1 Tether . 1 Model No: CF-VZSU0QW

<Only for model with digitizer>

Digitizer pen . 1

<Only for model with touchscreen>

Stylus . 1 OPERATING INSTRUCTIONS - Read Me First (This book) . 1

*1 Stored in the tablet at the time of packing. n Latest Information on Windows 10 When Microsoft Windows 10 is updated, the screen display or operation procedures may be changed. For the latest information on Windows 10, see the following web page. http://pc-dl.panasonic.co.jp/itn/addendum/

15 Getting Started First-time Operation 1 Attaching the pen (included) to the computer Use the tether to attach the pen (included) to the computer so you will not lose it. There are holes (A) to attach it. A 1 2 3 4 CAUTION l Do not pull the tether with excessive force. The stylus may hit the computer, persons body or other objects when re-

leased. 2 Connect your computer to a power outlet A Open the cover. B Connect your computer to a power outlet. The battery charging starts automatically. CAUTION l Do not disconnect the AC adaptor until the first-time opera-

tion procedure is completed. l When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adap-

tor. l Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. l When the DC plug is not connected to the computer, dis-

connect the AC cord from your electrical outlet. Power is consumed simply by having the AC adaptor plugged into an electrical outlet. 1 2 2 1 16 Getting Started 3 3 1 2 4 B 4 C D E F 3 Open the display A Pull out the handle. l If you do not pull out the handle before opening the display, the computer may fall over due to the weight of the display. B Push down on the latch (B), and pull it out to release it. C Hold the corners with both hands, and lift the display slightly. D Hold the side of the computer with either of your hands and then lift up the display to open. CAUTION l Do not open the display wider than necessary (180 or more), and do not apply excessive pressure to the LCD. Do not open or close the computer holding the edge of the LCD segment. Turn on the computer 4 Press and hold the power switch

(C) until the power indicator

(D) lights. CAUTION l Do not press the power switch repeatedly. l The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer. l Do not perform the following operation until the First-time Operation is completed. Touching the release lever (E) and detach lock (F) Detaching the tablet from keyboard base Connecting or disconnecting the AC adaptor Pressing the power switch Closing the display Any changes from the default setting of the Setup Utility l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again. l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support (

OPERATING INSTRUCTIONS - Reference Manual). 17 Getting Started First-time Operation 5 Setup Windows Follow the on-screen instructions. l The computer restarts several times. l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears. l During setup of Windows, use the touchpad and clicking to move the pointer and to click an item. l Setup of Windows will take approximately 5 minutes. Go to the next step, confirming each message on the display. l You can set the Wireless Network after the setup of Win-

dows is complete. If Lets get connected is displayed, you can select [Skip this step]. l We recommend that you set the password after the setup of Windows in complete. CAUTION l You can change the user name, password, image and secu-

rity setting after setup of Windows. l Use standard characters as a computer name: numbers 0 through 9, uppercase and lowercase letters from A to Z, and the hyphen (-) character. Do not use the following words and characters for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space. If the error message The computer name is not valid ap-

pears, check if characters other than the above are not entered. If the error message still remains on the display, set the key entry mode to English (ENG) and enter characters. 6 Restart the computer A Click B Click l A portion of the Panasonic PC Settings Utility functions will

(Start).

(Power) - [Restart]. be enabled after the computer restarts. 7 Update the on-screen manual A Connect to the internet. Sign in to Windows as an admin-

istrator. For further information, refer to B Update the on-screen manual. Double-click [Manual Selector] on the desktop. Connect to a network. Double-click the [Panasonic PC Settings Utility] on the desktop screen, and then click [Support] - [Manual] -

[Launch Manual Selector]. Follow the on-screen instructions. 18 Getting Started Create a recovery disc 8 A recovery disc allows you to install OS and restore its factory default condition, in case, the recovery partition of the SSD is damaged. We recommend creating a recovery disc before you begin using the computer. Refer to Manual Important Operation/Settings Create a Recovery Disc about creating the disc. OPERATING INSTRUCTIONS - Reference NOTE l To set the password, proceed as follows. A Click B Click [Add] under Password.

(Start) -

(Settings) - [Accounts] - [Sign-in options]. l Set the key entry mode to English (ENG) and enter characters. l Remember your password. If you forget the password, you cannot use Windows. Creating a password reset disk beforehand is recommended. 19 Getting Started Detaching the tablet from the keyboard base When detaching the tablet from the keyboard base while it is turned on, note the following points. CAUTION l Before detaching the tablet, confi rm the following things.

- Save the necessary data.

- Close fi les you have opened from removable disks and network drives.

- Remove peripheral devices connecting to the tablet. l Do not detach the tablet in the conditions below. When the SD Memory Card indicator is on. When playing/recording audio fi les or displaying motion video such as MPEG fi les. When playing a DVD-Video. When writing to a disc. When using communication software or network functions. A To detach the tablet while it is turned on, perform the following. CAUTION lBefore detaching the tablet, check the remaining battery power by pressing the Fn and F9 keyboard keys at the same time. When the battery status of the Battery 1 becomes 5% or less, can not detach the tablet from the keyboard base. in the taskbar of the desktop screen, and then click Click vice]. Undock Complete appears at the bottom right of the screen.

- [Eject Keyboard Base De-

NOTE lA confi rmation message may appear if an SD memory card is inserted in the keyboard base. If Undock Complete appears, click [OK] in the confi rmation message, and proceed to step B. The same operation can be performed by pressing the Fn and 1 keyboard keys at the same time. NOTE lTo cancel detachment, press the Fn and 1 keyboard keys at the same time after the above operation. B Release the detach lock (A). C Slide the release lever (B) in the direction of the arrow. d e t r a t S g n i t t e G 20 2 3 RELEASE A B D Detach the tablet from the keyboard base. CAUTION lWhen detaching the tablet from the keyboard base, hold the position at the locations dashed line circled in the illustration. The tablet can be attached facing the reverse direction. CAUTION lDepending on the shape of the tablets rear, you may not be able to operate the unit with the tablet attached in the direction illustrated. Be sure to verify this before actual use. NOTE l Do not attach/detach the tablet in the rain. 21 Getting Started Attaching the tablet to the keyboard base A Push the tablet at the locations dashed line circled in the illustration in a downward direction. Release lever (B) will return to the direction of the arrow. B Raise detach the lock (A) above. NOTE lConfirm that the red signs near the detach lock and the release lever can not be seen. 2 1 RELEASE A B 22 Getting Started MEMO 23 Panasonic Corporation Osaka, Japan Panasonic System Communications Company of North America Two Riverfront Plaza Newark, NJ 07102 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park NSW 2113 Web Site : https://panasonic.net/cns/pc/

Panasonic Corporation 2017 Printed in Japan HS1217-0 DHQX1427ZA/J1

WWAN FCC ID:ACJ9TGWW18B IC:216H-CFWW18A External photos 1. WWAN Module photos 1-1. Front view Shield <Shield removed>

Model: WW18A FCC ID: ACJ9TGWW18B IC: 216H-CFWW18A 1-2. Back view 1/1

CF-20 WWAN <FCC ID: ACJ9TGWW18B, IC: 216H-CFWW18A>

FCC ID Label location Tablet Mode Rear view Label for CF-20

(Under the battery pack) CF-20 WWAN <FCC ID: ACJ9TGWW18B, IC: 216H-CFWW18A>

FCC ID Label location Personal Computer Bottom view Label for CF-20

(Under the battery pack)

WWAN FCC ID :ACJ9TGWW18B IC:216H-CFWW18A Label 1. Label for WWAN Module Model: WW18A FCC ID: ACJ9TGWW18B IC: 216H-CFWW18A 2. Label position Visible outline for Module Label 1/1

Ben Botros, Regulatory Manager Panasonic Corporation of North America Agent Authorization Letter UL Japan, Inc. Consumer Technology Division 4383-326 Asama-cho, Ise-shi Mie, 516-0021, Japan Subject:

under FCC ID: ACJ9TGWW18B / Certified Under FCC Parts 22H, 24E, 27 and 90 Class II Permissive Change Application for Panasonic Single Modular Model WW18A For Installation within Panasonic Personal Computer Model CF-20 November 26, 2019 MSBD-19-F014 comply with the relevant provisions of the certification program;

To whom it may concern:

Please be notified that Ben Botros of Panasonic Corporation of North America (PNA), hereby authorize UL Japan, Inc. (UL Japan) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. (UL Japan) on our behalf shall have the same effect as acts of our own. The undersigned hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Japan as our agent, we still recognize that we are responsible to:

a) b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) d) and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) reference thereto and return any certification documents as required by the Certification Division;

f) g) h) ensure that any reference to our product certification in communication media such as documents, upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any use certification only to indicate the products are certified as being in conformity with specified standards;

do not use our product certification in such a manner as to bring the Certification Division into disrepute make claims regarding certification only in respect of the scope for which certification has been granted;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

brochures or advertising, complies with the requirements of the Certification Division;

Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com Ben Botros, Regulatory Manager Panasonic Corporation of North America i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is for Single Modular, Model WW18A under FCC ID: ACJ9TGWW18B and is valid for a one year period from the date of this letter. Thank you for your attention in this matter. Sincerely, Ben Botros Regulatory Manager Panasonic Corporation of North America Product Safety & Compliance Department Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

Ben Botros, Regulatory Manager Panasonic Corporation of North America Attestation Letter November 26, 2019 MSBD-19-F014 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:

under FCC ID: ACJ9TGWW18B / Certified Under FCC Parts 22H, 24E, 27 and 90 Class II Permissive Change Application for Panasonic Single Modular Model WW18A For Installation within Panasonic Personal Computer Model CF-20 To whom may it concern:

We, Panasonic Corporation of North America performed SAR test to mount the module WW18A into the portable host (Panasonic PC Model CF-20). The radiated emission testing was not additionally performed due to the following reasons:

The original FCC testing of the module WW18A was performed when the antenna was connected to the module in an open environment. Under this application, the WW18A itself and its antennas installed inside the host PC enclosure. The physical restraints introduced by the host PC enclosure should have resulted in equal or lower level of radiated emission.

Additionally, the integrated host CF-20 contains another wireless module (WL16A). However, although both wireless modules (WW18A and WL16A) operate simultaneously, Internal testing confirmed that there is no influence on the emissions levels due to these simultaneous transmissions. Therefore, the host device remains compliant with the regulations. The original FCC testing of the module WW18A was performed with an antenna of higher gain:

699 MHz - 716 MHz: 6dBi 788 MHz - 798 MHz: 6dBi 1710 MHz -1780 MHz: 6dBi 2305 MHz - 2315 MHz: 1dBi 777 MHz - 787 MHz: 6dBi 814 MHz - 849 MHz: 6dBi 1850 MHz -1910 MHz: 6dBi 2496 MHz -2690 MHz: 9dBi Sincerely, Ben Botros Regulatory Manager Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

Ben Botros, Regulatory Manager Panasonic Corporation of North America Class II Permissive Change Letter November 26, 2019 MSBD-19-F014 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:

under FCC ID: ACJ9TGWW18B / Certified Under FCC Parts 22H, 24E, 27 and 90 Class II Permissive Change Application for Panasonic Single Modular Model WW18A For Installation within Panasonic Personal Computer Model CF-20 To whom it may concern:

Pursuant to CFR 2.1043, Panasonic Corporation of North America hereby requests a Class II Permissive Change for its application with FCC ID: ACJ9TGWW18B, which was granted by UL Japan, Inc. This authorization only covers the Class II permissive change application for the following changes:

Mobile to Portable Classification due to Installation into Panasonic PC (Model: CF-20) This module used in the Host PC CF-20 has the power reduction mode which is specially programmed and tuned to operate at a lower power setting than the original maximum power to ensure that the output power does not exceed the targets described in the SAR report. Collocation with Wireless Module Model: WL16A with pre-existing FCC ID: ACJ9TGWL16A, whose SAR test data is included in this application. The Host PC CF-20 doesnt support LTE band 30 which is disabled at the factory. No other radio parameters have been changed Thank you for your attention in this matter. Sincerely, Ben Botros Regulatory Manager Panasonic Corporation of North America Product Safety & Compliance Department Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

Ben Botros, Regulatory Manager Panasonic Corporation of North America Request for Permanent & Short-Term Confidentiality November 26, 2019 MSBD-19-F014 UL Japan, Inc. Consumer Technology Division 4383-326 Asama-cho, Ise-shi Mie, 516-0021, Japan Subject: Class II Permissive Change Application for Panasonic Single Modular Model WW18A under FCC ID: ACJ9TGWW18B / Certified Under FCC Parts 22H, 24E, 27 and 90 For Installation within Panasonic Personal Computer Model CF-20 To whom it may concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as permanent confidential document from public disclosure. Theory of Operation & Tune up and Alignment Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In addition, please be advised that Panasonic Corporation of North America hereby requests the following filed sensitive information to be held under short-term confidential, pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions Rules and the provisions in FCC Public DA 04-1705. We request temporarily confidentiality of 45 days, starting from the original issued Certification grant date. Operating Instructions (Users Manual), Test Setup Photographs & External and Internal Photographs Panasonic also acknowledges that we will provide appropriate notice to UL Japan should either of the following occur. If we require additional 45 day extension period, we will notify UL Japan with a new request letter at least seven days prior to the short-term confidentiality expiration date [Note: up to a maximum of 3 extensions only allowed], or We will immediately notify UL Japan in the event the information regarding the product or the product is made available to the public. UL Japan will them release the documents listed above for public disclosure, pursuant to FCC Public Notice DA 04-1705. Sincerely, Ben Botros Regulatory Manager Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

Ben Botros, Regulatory Manager Agent Authorization Letter November 20, 2019 MSBD-19-F013 UL Japan, Inc. Consumer Technology Division 4383-326 Asama-cho, Ise-shi Mie, 516-0021, Japan Re: Change of Identification Application From:

Panasonic Model: WW18A, FCC ID: ACJ9TGWW18A To: Panasonic Model: WW18A, FCC ID: ACJ9TGWW18B To whom it may concern:

The undersigned hereby authorize UL Japan, Inc. (UL Japan) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan on our behalf shall have the same effect as acts of our own As defined in 47 CFR Ch. 1.2002 (b), we further certify that the applicant to this application is not subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. In authorizing UL Japan as our agent, we still recognize that we are responsible to:

a) b) Make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

Comply with the relevant provisions of the certification program;

Make claims regarding certification only in respect of the scope for which certification has been granted;

Do not use our product certification in such a manner as to bring the Certification Division into disrepute c) d) and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) f) Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

Use certification only to indicate the products are certified as being in conformity with specified standards;

g) Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

h) Ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com Ben Botros, Regulatory Manager i) Keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

j) Take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) Document the actions taken. This authorization is valid for one-year period from the date of this letter. This application for the subject equipment has not been submitted to another TCB for certification Thank you for your attention in this matter. Authorized by, Ben Botros Regulatory Manager Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com

Ben Botros, Regulatory Manager Change of Identification Application November 20, 2019 MSBD-19-F013 Panasonic Model: WW18A, FCC ID: ACJ9TGWW18A Panasonic Model: WW18A, FCC ID: ACJ9TGWW18B UL Japan, Inc. Consumer Technology Division 4383-326 Asama-cho, Ise-shi Mie, 516-0021, Japan Re: Change of Identification Application From:

To:

To whom it may concern:

This Change of Identification request applies for a new FCC ID as established in 47CFR 2.933(b) for a currently approved device. This application by Panasonic Corporation of North America will establish a new FCC ID: ACJ9TGWW18B under Panasonic Corporation of North America grantee code for purpose of marketing. The original grant under FCC ID: ACJ9TGWW18A will remain in effect. Per 2.933(b) 1. The original identification is FCC ID: ACJ9TGWW18A 2. The original grant date is July 25, 2018 3. The equipment is electrically identical. Only the FCC ID number are different. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

Cover Letter External Photos FCC ID label format and location Thank you for your attention in this matter. Authorized by, Ben Botros Regulatory Manager Panasonic Corporation of North America Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com