all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Users Manual | Users Manual | 2.81 MiB | April 06 2009 | |||
1 2 3 4 |
|
Users Manual RF Warning Addendum | Users Manual | 19.78 KiB | April 06 2009 | |||
1 2 3 4 | Cover Letter(s) | April 06 2009 | ||||||
1 2 3 4 | Test Report | April 06 2009 | ||||||
1 2 3 4 | External Photos | April 06 2009 | ||||||
1 2 3 4 | ID Label/Location Info | April 06 2009 | ||||||
1 2 3 4 | Internal Photos | April 06 2009 | ||||||
1 2 3 4 | RF Exposure Info | April 06 2009 | ||||||
1 2 3 4 | RF Exposure Info | April 06 2009 | ||||||
1 2 3 4 | Test Setup Photos | April 06 2009 | ||||||
1 2 3 4 | Test Report | April 06 2009 | ||||||
1 2 3 4 | Test Setup Photos | April 06 2009 | ||||||
1 2 3 4 | RF Exposure Info | April 06 2009 |
1 2 3 4 | Users Manual | Users Manual | 2.81 MiB | April 06 2009 |
OPERATING INSTRUCTIONS Personal Computer Model No. CF-U1 series Contents Getting Started Introduction .........................................2 Read Me First .....................................4 Description of Parts ...........................15 Useful Information On-screen Manual .............................29 Handling and Maintenance ................30 Preparation ........................................19 First-time Operation ...........................24 Reinstalling Software .........................32 Troubleshooting Troubleshooting (Basic) .....................36 Appendix LIMITED USE LICENSE AGREEMENT ..44 Specications ....................................48 LIMITED WARRANTY .......................52 For further information about the computer, you can refer to the on-screen manual. To access the on-screen manual page 29 On-screen Manual Please read these instructions carefully before using this product and save this manual for future use. d e t r a t S g n i t t e G n o i t a m r o f n I l u f e s U g n i t o o h s e l b u o r T x i d n e p p A Introduction Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instructions carefully. In these instructions, the names are referred as follows. Windows Vista Business as Windows or Windows Vista Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies as Windows, Windows XP Terms and illustrations in these instructions
Page in these Operating Instructions or in the Reference Manual.
Reference to the on-screen manuals. CAUTION : Conditions that may result in minor or moderate injury. NOTE : Useful and helpful information.
Press [
] (Enter) key.
(F2): Press and hold [Fn] key, and then press [U] (F2) key. d e t r a t S g n i t t e G Click :
Right-click :
Touch the screen with the stylus. Touch and hold with the stylus, or touch and select the right button of touch pointer. A Click B Click the object you want to right-click. on the notication area.
(Start) - [All Programs] :
Click
(Start), and then click [All Programs].
[start] - [All Programs] :
Click [start], and then click [All Programs]. You may need to double-click in some cases. Some illustrations are simplied to help your understanding and may look If you do not log on as an administrator, you cannot use some functions or different from the actual unit. cannot display some screens. Refer for the latest information about optional products to the catalogs, etc. 2 Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Disclaimer Computer specications and manuals are subject to change without notice. Mat-
sushita Electric Industrial Co., Ltd. assumes no liability for damage incurred di-
rectly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Trademarks Microsoft, Windows, Windows Vista, and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation. d e t r a t S g n i t t e G SDHC Logo is a trademark. Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Computrace is a registered trademark of Absolute Software Corp. Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. 3 d e t r a t S g n i t t e G Read Me First Models for U.S.A. Federal Communications Commis-
sion Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modications not expressly approved by the party re-
sponsible for compliance could void the users authority to operate this 4 equipment. FCC RF Exposure Warning:
<Only for model with wireless LAN/
wireless WAN/Bluetooth>
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is provided with external antenna connector(s) for connection to optional Cradle for mobile external mounted antenna(s). External antenna(s) must be professionally installed and cannot exceed recommended maxi-
mum antenna gain as described in individual provided supplement instructions for wireless transmit-
ters. Also, user must maintain mini-
mum 20 cm spacing between exter-
nal antenna(s) and all persons body (excluding extremities of hands, wrist and feet) during wire-
less modes of operation. 25-M-1-3
<Only for model with wireless LAN>
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interfer-
ence to co-channel Mobile Satellite systems. High power radars are allo-
cated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interfer-
ence with and/or damage this product. 25-M-W-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any inter-
ference received, including interfer-
ence that may cause undesired operation. Models for Canada Canadian ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 7-M-2
<Only for model with wireless LAN/
Bluetooth>
Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions;
(1) this device may not cause interfer-
ence, and
(2) this device must accept any inter-
ference, including interference that may cause undesired operation of the device. 30-Ca-1-1 Responsible Party:
Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Tel No:1-800-LAPTOP5 (1-800-527-
8675) 6-M-1 NOTICE for the products using LCD This product has a uorescent lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance:
<http://www.eiae.org/>
d e t r a t S g n i t t e G 24-M-2
<Only for model with wireless LAN>
This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-
5850 MHz and these radars could cause interference and/or damage to LELAN devices. 30-Ca-2-1 This device has been designed to operate with an antenna having a maximum gain of 3.53 dBi. Antenna having a higher gain is strictly prohib-
ited per regulations of Industry Cana-
da. The Required antenna impedance is 50 ohms. 5 d e t r a t S g n i t t e G Read Me First To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(EIRP) is not more than that required for successful communication. 25-Ca-1-1 Information to the User
<Only for model with wireless LAN/
Bluetooth>
This product and your Health This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emit-
ted by wireless devices like for exam-
ple mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommenda-
tions, we believe this product is safe for use by consumers. These stan-
dards and recommendations reect the consensus of the scientic community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restrict-
ed by the proprietor of the building or responsible representatives of the organization. These situations may for example include:
If you are uncertain of the policy that applies on the use of wireless devices in a specic organization or environ-
ment (e.g. airports), you are encour-
aged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by unau-
thorized modication of this product. The correction of interference caused by such unauthorized modication will be the responsibility of the user. We and its authorized resellers or distribu-
tors are not liable for damage or viola-
tion of government regulations that may arise from failing to comply with these guidelines. 26-M-1 Using this product on board of airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identied as harmful. 6 A bord dun avion, ou Dans tout autre environnement o les risques dinterfrence sur dautres appareils ou services sont perus ou identiables comme dangereux. Informations destines aux utilisateurs
<Uniquement les modles avec rseau local sans l et/ou Bluetooth>
Ce produit et votre sant Ce produit et votre sant Ce produit, comme tout autre appareil radio, met de lnergie radiolectrique. Toutefois, la quantit dnergie mise par ce produit est beaucoup moins impor-
tante que lnergie radiolectrique mise par des appareils sans l tels que les tlphones portables. Lutilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opre dans les limites des directives concernant les normes et les recomman-
dations de scurit sur les frquences radio. Ces normes et recommandations retent le consensus de la communaut scientique et rsultent de dlibrations de jurys et comits de scientiques qui examinent et interprtent continuellement les nouveauts de la vaste littrature sur les recherches effectues. Dans cer-
taines situations ou environnements, lutilisation de ce produit peut tre re-
streinte par le propritaire du btiment ou par les reprsentants responsables de lorganisation. Ces situations peuvent tre les suivantes par exemple :
Si vous ntes pas sr de la rglementa-
tion applicable lutilisation dappareils sans l dans une organisation ou un environnement spcique, (par exemple dans un aroport) nous vous invitons demander lautorisation dutiliser ce produit avant sa mise en marche. Informations concernant la rglementation Nous dclinons toute responsabilit pour toute interfrence radio ou tlvision cause par des modications non autori-
ses apportes ce produit. La correc-
tion dinterfrences causes par de telles modications non autorises sera la seule responsabilit de son utilisateur. Nousmmes, les revendeurs ofciels et les distributeurs ne sommes pas respon-
sable de tout dgt ou de toute violation des rglements de ltat pouvant dcoul-
er du non-respect de ces directives. 26-F-1 d e t r a t S g n i t t e G Safety Precautions
<Only for model with wireless WAN>
The following safety precautions must be observed during all phases of the opera-
tion, usage, service or repair of any Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating person-
nel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions*1. 7 Read Me First When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Handheld Com-
puter incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equip-
ment and hearing aids can be affected by interference from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equip-
ment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating wireless WAN modem away from the pacemaker, while it is on. Switch off Personal Computer or Handheld Computer incorporating wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications sys-
tems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of ammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmo-
spheres can constitute a safety hazard. Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Handheld Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or dan-
ger. Road safety comes rst! Do not use a Personal Computer or Handheld Computer incorporating wireless WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recom-
mended to stow the unit in the boot or secure stowage area while driv-
ing. Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy. Air bags inate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with d e t r a t S g n i t t e G 8 great force and cause serious injury to occupants of the vehicle. IMPORTANT!
Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications, for ex-
ample emergency calls. Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating wireless WAN modem must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, xed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorporating wireless WAN modem. d e t r a t S g n i t t e G
*1 In locations where the use of wireless devices is prohibited, please turn your Wireless Switch off, or check to make sure that your Wire-
less Ready Indicator is off . Please note that in some cases, wireless devices may be operating even in Sleep/Standby modes. 27-1-2 Lithium Battery / Pile au lithium Lithium Battery!
This computer contains a lithium bat-
tery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel. Warning!
A risk of explosion from incorrect instal-
lation or misapplication may possibly occur. 15-E-1 Pile au lithium!
Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre rempla-
ce que par un technicien quali. Danger ! Risque dexplosion en cas de non respect de cette mise en garde!
15-F-1 9 Read Me First d e t r a t S g n i t t e G For Used in Motor Vehicle /Pour Lutilisation Dans Un Vhicule Motoris Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as ve-
hicle information, system control, rear or side observation and navigation. If used for entertainment purpose, such as television reception or video play, it must be installed to the rear of the drivers seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individu-
al state/provincial laws to determine lawful use of this product while operat-
ing within a motor vehicle. Avertissement : Lordinateur bloc-notes peut tre install dans un vhicule motoris et dans le champ de vision du conducteur uniquement en tant que dispositif daide aux fonctions du vhi-
cule, comme par exemple pour fournir des informations sur le vhicule, com-
me dispositif de contrle de systme, pour lobservation larrire ou sur les cts du vhicule, ainsi que pour fournir de linformation routire. Pour toute utilisation n de divertissement, comme par exemple pour regarder la tlvision ou jouer des jeux vido, il doit tre install larrire du sige du conducteur, en un emplacement o il ne sera pas visible, ni directement ni indirectement, pour le conducteur du vhicule motoris. Vriez les lois fdrales et nationales qui rgissent lutilisation lgale de cet appareil lintrieur dun vhicule motoris. 35-M-1 Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 53-M-1 10 Precautions THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*2. PANASONIC WILL NOT BE RE-
SPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PROD-
UCT ARISING OUT OF THE FOREGOING USES.
*2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag
(EFB) Systems and Class1 EFB Systems when used during critical phases of ight
(e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No.36. Panasonic cannot guarantee any specications, technologies, reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio Frequency Emission, etc) requirements related to aviation standards that exceed the specications of our COTS (Commercial-
Off-The-Shelf) products. 39-E-1 d e t r a t S g n i t t e G This computer is not intended for use in medical equipment including life-support systems, air trafc control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held respon-
sible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. The CF-U1 was developed based on thorough research into the real-world portable computing environments. Ex-
haustive pursuit of usability and reliability under harsh conditions led to innovations such has the magnesium alloy exterior, vibration damped ash memory disk drive, exible internal connections. The CF-U1s outstanding engineering has been tested using the strict MIL-STD-
810F (for vibration and shock) and IP (for dust and water) based procedures. As with any portable computer device precautions should be taken to avoid any damage. The following usage and han-
dling procedures are recommended. Before putting the computer away, be sure to wipe off any moisture. If a Malfunction Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot Continuing to use this product while any of the above conditions are present may result in re or electric shock. If a malfunction occurs, immediately turn the power off and unplug the AC plug, and then remove the battery pack. Then, contact your technical support ofce. Do Not Touch This Product and Cable When It Starts Thundering Electric shock may result. Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Otherwise, a re due to overheating may result. Connecting to a DC/AC converter
(inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet speci-
cally approved for such use. 11 d e t r a t S g n i t t e G Read Me First Do Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in re, short circuit, or electric shock. Do Not Pull or Insert the AC Plug If Your Hands Are Wet Electric shock may result. Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris accumulates on the plug, humidity, etc. may cause a defect in the insulation, which may result in a re. Pull the plug, and wipe it with a dry cloth. Pull the plug if the computer is not being used for a long period of time. Insert the AC Plug Completely If the plug is not inserted completely, re due to overheating or electric shock may result. Do not use a damaged plug or loose AC outlet. Close the Connector Cover Tightly When Using This Product Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. The entry of foreign matter may cause a re or electric shocks. If foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support ofce. Do Not Disassemble This Product There are high-voltage areas inside which may give you an electric shock if you should touch them. Do not touch the pins and circuit boards inside, and do not allow foreign matter to enter inside. Also, remodeling or disassembly may cause a re. 12 Keep SD Memory Cards Away from Infants and Small Children Accidental swallowing will result in bodily injury. In the event of accidental swallowing, see a doctor immediately. Do Not Place This Product on Unsta-
ble Surface If balance is lost, this product may fall over or drop, resulting in an injury. Avoid Stacking If balance is lost, this product may fall over or drop, resulting in an injury. Do Not Leave This Product in High Temperature Environment for a Long Period of Time Leaving this product where it will be exposed to extremely high temperatures such as near re or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. Continued use in such a resulting condition may lead to short-circuiting or insulation defects, etc. which may in turn lead to a re or electric shocks. Hold the Plug When Unplugging the AC Plug Pulling on the cord may damage the cord, resulting in a re or electric shock. Do Not Move This Product While the AC Plug Is Connected The AC cord may be damaged, resulting in re or electric shock. If the AC cord is damaged, unplug the AC plug immediately. Use Only the Specied AC Adaptor With This Product Using an AC adaptor other than the one supplied (attached to your product or supplied by Panasonic) may result in a re. Do Not Subject the AC Adaptor to Any Strong Impact Using the AC adaptor after a strong impact such as being dropped may result in electric shock, short circuit, or re. d e t r a t S g n i t t e G Take a Break of 10-15 Minutes Every Hour Using this product for long periods of time may have detrimental health effects on the eyes or hands. Do Not Turn the Volume Up to Loud When Using Headphones Listening at high volumes that overstimu-
late the ear for long periods of time may result in loss of hearing. Do Not Use with Exposing the Skin to Precautions (Battery Pack) Do Not Use with Any Other Product The battery pack is rechargeable and was intended for the specied product. If it is used with a product other than the one for which it was designed, electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Charge the Battery Using Methods Other Than Those Specied If the battery is not charged using one of the specied methods, electrolyte leak-
age, generation of heat, ignition or rup-
ture may result. Do Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat Generation of heat, ignition or rupture may result. Avoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) Electrolyte leakage, generation of heat, ignition or rupture may result. Do Not Insert Sharp Objects into the Battery Pack, Expose It to Bumps or Shocks, Disassemble, or Modify It Electrolyte leakage, generation of heat, ignition or rupture may result. If this product is subjected to a strong impact, stop using it immediately. Do Not Short the Positive (+) and Negative (-) Contacts Generation of heat, ignition or rupture may result. Do not place the battery pack together with articles such as necklaces This Product for a Long Period of Time Using this product with exposing the skin to the heat source of this product or AC adaptor for a long period of time can cause a low-temperature burn. Do not place the computer near a television or radio receiver. Keep the computer away from mag-
nets. Data stored on the hard disk may be lost. or hairpins when carrying or storing. Do Not Use This Product with a Bat-
tery Pack Other Than the One Speci-
ed Use only the specied battery pack (CF-
VZSU53W) with your product. Use of battery packs other than those manufac-
tured and supplied by Panasonic may present a safety hazard (generation of heat, ignition or rupture). Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. Do not expose the battery pack to water, or allow it to become wet. If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40%
and store it in a cool, dry place. This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity. The battery pack is not charged when the computer is rst purchased. Be sure to charge it before using it for the rst time. When the AC adaptor is connected to the computer, charging begins automatically. 13 d e t r a t S g n i t t e G Read Me First Should the battery leak and the uid get into your eyes, do not rub your eyes. Immediately ush your eyes with clear water and see a doctor for medical treatment as soon as pos-
sible. NOTE The battery pack may become warm during recharging or normal use. This is completely normal. Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 C to 50 C
{32F to 122 F}). Reference Manual Battery
Power) Once the allowable range requirement is satised, charging begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 C {50 F} or below.) In high-temperature environments, the battery takes longer to fully recharge and the operating time is shorter. Only use the computer within the allowable temperature range. This computer has a high tempera-
ture mode function that prevents the degradation of the battery in high temperature environments. (
Reference Manual Battery Power) A level corresponding to a 100%
charge for high temperature mode is approximately equivalent to an 80% charge level for normal tem-
perature mode. The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its performance, the battery pack should be replaced with a new one. When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY 48-M-1 14 Description of Parts C 1 A B D E H 2 F G I A: LCD Reference Manual Touchscreen B: Scroll Button You can scroll the screen, etc. This works as a mouse wheel. Reference Manual Hardware Button Setting C: LED Indicator
: Wireless ready This indicator lights when Wireless LAN, Bluetooth, and/
or Wireless WAN are connect-
ed and ready. It does not necessarily indicate the On/Off condition of the wireless con-
nection. Reference Manual Disabling/Enabling Wireless Communication
: Wireless WAN status
<Only for model with wireless WAN>
Refer to the instruction manual of the wireless device. 1 : Battery 1 status Reference Manual Battery Power d e t r a t S g n i t t e G D: Zoom Button Reference Manual Zoom Function E: Keyboard F: Power Switch G: Application Buttons You can register your favorite appli-
cation les to 4 buttons respectively. Reference Manual Hardware Button Setting H: LED Indicator
: Power status Off: Power off/Hibernation Green: Power on Blinking green
: Sleep
: Standby
: Flash memory status
: Battery 2 status Reference Manual Battery Power I: Function Key Reference Manual Key Combinations 15 Click [start] - [All Programs] -
[SoundMAX] - [Control Panel] and select [Microphone], and then add a check mark for [No Filtering] in
[Microphone Enhancements]. When using a monaural micro-
phone with a 2-terminal plug:
Click
(Start) - [Control Panel] -
[Hardware and Sound] - [Sound] -
[Recording] - [Microphone] -
[Properties], and then add a check mark for [Voice enhance-
ments] in [Microphone Enhance-
ments]. Otherwise, only audio on the left track will be recorded. Click [start] - [All Programs] -
[SoundMAX] - [Control Panel] and select [Microphone], and then add a check mark for [Voice Record-
ing] in [Microphone Enhance-
ments]. Otherwise, only audio on the left track will be recorded. E: Stylus Holder (right side) Description of Parts Right side A B C D E A: SD Memory Card Slot Reference Manual SD Memory Card d e t r a t S g n i t t e G B: SD Memory Card Indicator
(Blinking: During access) Reference Manual SD Memory Card C: Headphone Jack You can connect headphones or amplied speakers. When they are connected, audio from the internal speakers is not heard. D: Microphone Jack A condenser microphone can be used. If other types of microphones are used, audio input may not be possible, or malfunctions may occur as a result. When recording in stereo using a stereo microphone:
Click
(Start) - [Control Panel] -
[Hardware and Sound] - [Sound] -
[Recording] - [Microphone] -
[Properties], and then add a check mark for [No Audio en-
hancements] in [Microphone Enhancements]. 16 Left side B DC IN 16V C A Top D E Rear and Bottom F G J K D H I A: Stylus Holder (left side) B: DC-IN Jack C: Wireless Switch Reference Manual Disabling/Enabling Wireless Communication D: Security Lock (2 holes) A Kensington cable can be con-
nected. For further information, read the manual that comes with the cable. E: USB Port Reference Manual USB Devices d e t r a t S g n i t t e G F: Speaker Reference Manual Key Combinations G: Battery 2 case/indicator Power H: Hand strap I: Battery 1 case/indicator Reference Manual Battery Reference Manual Battery Power J: Expansion Bus Connector Reference Manual Cradle /
Mini Dock K: SIM card slot To open the battery cover page 19 Inserting the Battery Packs. 17 Description of Parts Inside A B C d e t r a t S g n i t t e G D B A A: Wireless WAN antenna
<Only for model with wireless WAN>
B: Wireless LAN antenna
<Only for model with wireless LAN>
Reference Manual Wireless LAN C: Bluetooth antenna
<Only for model with Bluetooth>
Reference Manual Bluetooth D: GPS antenna
<Only for model with GPS>
NOTE This computer contains a magnet and magnetic products at the locations circled in the illustration. The battery cover also has the magnet on the back side. Avoid leaving metallic object or magnetic media in contact with these areas. 18 Preparation Conrmation A Check and identify the supplied accessories. If you do not nd the described accessories, contact Panasonic Technical Support ( page 54). AC Adaptor . 1 AC Cord . 1 Battery Packs . 2 Model No: CF-AA1633A Stylus . 1 Model No: CF-VZSU53W Tether . 1 Operating Instructions (This book) . 1 Product Recovery DVD-ROM Windows Vista Business SP1 . 1 Product Recovery DVD-ROM Windows XP Professional SP2 . 1 The stylus and tether has already been attached to the computer at the time of purchase. B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computers packaging ( page 44). d e t r a t S g n i t t e G Inserting the Battery Packs Insert the battery pack to 2 battery cases. Place the computer on a soft cloth with the panel side down. 1 A A Remove the edge (A) of hand strap passing through the clip. (The illustration shows the left side of hand strap as an example.) 19 Preparation d e t r a t S g n i t t e G B 2 3 4 C 5 6 7 8 20 E D F B Tip the clip (B) front to pull it out of the com-
puter. (Do the same for the right side of hand strap.) C Open up the whole hand strap. D Press and hold (C) and slide the latch to unlock the battery cover. (The illustration shows Battery 1 as an example.) E Remove the battery cover. F Insert the battery pack matching with (D) side. Then, slide down the battery pack (E). G Attach the battery cover. Insert the claw (F) of the cover matching the dent of computer, and press down the latch side of cover to close. Make sure the latch is on the OPEN side. If the cover does not close rmly, insert the claw again. If the problem persists, check if the battery is inserted properly. H Press and hold the battery cover and slide the latch to x.
(Take the steps D to H for Battery 2 as well.) I Attach the hand strap back to the original form. Take the steps A and B in the reverse order. CAUTION The computer does not operate without the battery cover attached. Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer. Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. About the battery for this computer This computer uses 2 battery packs. The battery is charged (page 24) and power is consumed only on either bat-
tery pack. Those operations switch to the other battery pack automatically. When the computer is connected to the Cradle (optional: CF-VEBU11U), the battery pack is charged when the AC adaptor is connected to the Cradle. With the battery charger (CF-VCBU11U) sold separately, you can remove the empty battery pack and charge it while using the computer. You can insert or remove the battery pack while the computer is ON. Be sure not to remove the battery pack being used by mistake. (Refer to Manual Battery Power ) Reference NOTE To conserve power, the following power saving methods are set at the time of purchase. The screen automatically turns off after 15 minutes of inactivity. d e t r a t S g n i t t e G The computer automatically enters sleep*1 after 20 minutes of inactivity.
*1 Refer to Reference Manual Sleep and Hibernation Functions about resuming from sleep. The computer automatically enters standby*2 after 20 minutes of inactivity.
*2 Refer to Reference Manual Standby and Hibernation Functions about resuming from standby. Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully charged, the battery will fully discharge in the following period of time:
When power is off: Approx. 7 weeks In sleep (
In hibernation: Approx. 3 days
) : Approx. 2 days
) / standby (
When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Power is consumed simply by having the AC adaptor plugged into an electrical outlet. Power consumption in each mode is as follows. (When AC adaptor is connected) When the screen is off: Approx. 6.7 W In sleep (
) / standby (
The battery pack is fully charged (or not being charged) and the computer is
) : Approx. 1 W off: Approx. 0.9 W 21 Preparation Attaching the stylus to the computer The stylus has already been attached to the computer at the time of purchase. Use the computer with the stylus attached not to lose it. If the stylus is removed for its position change or replacement, attach it according to the instruction below. A Attach the tether to the stylus. B Insert the tether to (A) of computer and pass the stylus to x. You can store the stylus at (B) or (C) of the computer. B C You can use the touchscreen function to per-
form the same operation as the mouse. Touch the screen surface with the stylus (included). To right-click Touch and hold with the stylus, or touch and select the right button of touch pointer. A Click B Click the object you want to right-click. on the notication area. A d e t r a t S g n i t t e G Using the stylus 22 Using the hand strap A When using the computer holding with hand, insert your hand to (A) part of the hand strap. Fix the hand strap rmly so that the computer does not come off, and then turn it over. When the hand strap is too loose or too tight, you can adjust the hand strap accord-
ing to the instructions below. CAUTION If the hand is not securely xed to the hand strap, the computer may drop. d e t r a t S g n i t t e G Adjusting the hand strap A B C 3 D E Adjust the fastening strength of hand strap as below. A Remove (A) from the strap joint and next remove (B). B Adjust the position (C). C Attach (D), then (E) to the joint. Attach the hand strap rmly so that the strap does not come off. CAUTION If the hand strap loosens, the computer may Do not use the strap if it becomes worn or fall down. damaged. 23 First-time Operation Setting up the computer NOTE Be sure the Wireless switch (A) is ON before setting. The computer may not be set properly if the switch is OFF. d e t r a t S g n i t t e G A 1 Connect your computer to a power outlet. The battery charging starts automatically. ( page 21). CAUTION Do not disconnect the AC adaptor until the Setting up the computer procedure is completed. When using the computer for the rst time, do not connect any peripheral device except the battery pack and AC adaptor. Handling the AC adaptor Problems such as sudden voltage drops may arise dur-
ing periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. 2 Turn on the computer. A Press the power switch (B). lights. The power indicator B CAUTION Do not press the power switch repeatedly. The computer will forcibly be turned off if you press and hold the power switch for 4 seconds or longer. Once you turn off the computer, wait for 10 seconds or more before you turn on the computer again. Do not perform the following operation until the ash memory drive indicator Connecting or disconnecting the AC adaptor Pressing the power switch Touching the keyboard, touchscreen or external turns off. 24 d e t r a t S g n i t t e G mouse Turn on/off the wireless switch When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support ( page 54). Any changes from the default setting of the Setup Utility must not be made until the Setting up the computer procedure is completed. 3 Setup Windows. During setup of Windows, use the stylus to move the cursor and to click an item. ( page 22) A Follow the on-screen instructions. After turning on the computer, Please wait while windows sets up your computer ......... appears, and then a small circle circulates on the screen. This will take a few minutes. Setup of Windows will take approximately 20 min-
utes. Go to the next step, conrming each mes-
sage on the display. CAUTION You cannot choose the following words for user name and password: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9. You can change the user name, password, image and security setting after setup of Windows. Remember your password. If you forget the password, you cannot use the Windows. Creating a password reset disk beforehand is recommended. The wallpaper for the rst logon user has already been set on 3 Setup Windows. When using this computer under the sun, the screen becomes easily viewable by changing the wallpaper to the white wallpaper. 25 First-time Operation A Right-click on the desktop, and click [Personalize] -
[Background]. B Select [Solid Colors] at [Location]. C Select the white wallpaper and click [OK]. When you set date/time/time zone and click [Next], the screen may not go to the next step for a few min-
utes. Do not touch the keyboard, and wait until the screen changes. If An unexpected error has occurred (or a similar message) is displayed, click [OK]. This is not a mal-
function. Wait until the ash memory drive indicator has turned off. 4 Perform the touchscreen calibration. At rst, log on to Windows as an administrator, and per-
form this calibration. A Click
(Start) - [Control Panel] - [Additional Options] - [Tablet Calibration]. B Using the stylus, touch each of the 9 + target marks one by one. Perform the following calibration for each user. A Click
(Start) - [Control Panel] - [Mobile PC] -
[Tablet PC Settings]. B Click [Calibrate]. C Using the stylus, touch each of the 4 + target marks one by one, and then click [OK]. A Click [start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel]. B Select [Calibration] in [Touch Panel Settings]. C Select [9 point], [12 point] or [20 point] in [Accuracy required], and click [Apply]. D Click [Calibrate Now] in [Calibration]. E Using the stylus, touch each of the + target marks one by one until it blinks, and then press ter).
(En-
d e t r a t S g n i t t e G 26 F Click [Update] in [Calibration]. G Click [OK]. 5 Create a new account. A Click [start] - [Control Panel] - [User Accounts] -
[Create a new account]. CAUTION Remember your password. If you forget the password, you cannot use the Windows operation system. Creating a password reset disk beforehand is recom-
mended. d e t r a t S g n i t t e G NOTE PC Information Viewer This computer periodically records the management information of the ash mem-
ory, etc. The maximum data volume for each record is 1024 bytes. This information is only used for estimating the cause when the ash memory goes down by any possibility. They are never sent to outside via network nor used for any other pur-
pose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save func-
tion for management information history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
Reference Manual Checking the Computers Usage Status) Precaution against Starting Up/Shutting Down Do not do the following Connecting or disconnecting the AC adaptor Pressing the power switch Touching the keyboard, touchscreen or external mouse Turn on/off the wireless switch To change the partition structure You can shrink a part of an existing partition to create unallocated drive space, from which you can create a new partition. This computer has a single partition in the default setting. A Click
(Start) and right-click [Computer], then click [Manage]. A standard user needs to enter an administrator password. 27 First-time Operation B Click [Disk Management]. C Right-click the partition for Windows (c drive in the default setting), and click [Shrink Volume]. The partition size depends on the computer specications. D Input the size in [Enter the amount of space to shrink in MB] and click
[Shrink]. You cannot input a larger number than the displayed size. E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume]. F Follow the on-screen instructions to make the settings, and click [Finish]. Wait until formatting is completed. NOTE You can create an additional partition using remaining unallocated space or newly creating unallocated space. To delete a partition, right-click the partition and click [Delete Volume] in the step C. d e t r a t S g n i t t e G 28 On-screen Manual You can access the Reference Manual and the Important Tips on the computer screen. When you access the Reference Manual and the Important Tips for the rst time, the License Agreement of the Adobe Reader may be displayed. Read it carefully and select [Accept] to proceed. Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computers performance. To access the Reference Manual:
A Double-click on the desktop. Alternatively click Manuals] - [Reference Manual].
(Start) - [All Programs] - [Panasonic] - [On-Line A Click [start] - [Reference Manual]. Important Tips The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum condition to obtain longer operation time. The Important Tips will provide you with the helpful information about the battery and touchscreen. Read to use the battery pack in the optimum condition to obtain longer operation time. To access the Important Tips:
n o i t a m r o f n I l u f e s U A Double-click Alternatively click on the desktop. Manuals] - [Important Tips].
(Start) - [All Programs] - [Panasonic] - [On-Line A Double-click on the desktop. Alternatively click [start] - [All Programs] - [Panasonic] - [Battery] -
[Important Tips] or click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips]. NOTE When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update. See http://www.adobe.com/ for the latest version of Adobe Reader. 29 Handling and Maintenance Operation environment Temperature: Operation : 5 C to 35 C {41 F to 95 F}
Storage : -20C to 60 C {- 4 F to 140 F}
Operation : 30% to 80% RH (No condensation) Humidity:
Storage : 30% to 90% RH (No condensation) Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in the product deterioration and will shorten the product life. Do not place the computer in the following areas, otherwise the computer may be damaged. Near electronic equipment. Image distortion or noise may occur. In extremely high or low temperature. As the computer can become hot during operation, keep it away from items that are sensitive to heat. Handling cautions This computer is designed to minimize shock to parts such as the LCD and the ash memory and equipped with a drip-proof keyboard, but no warranty is pro-
vided against any trouble caused by shock. Be extremely careful when handling the computer. When carrying the computer:
Turn off the computer. Remove all external devices, cables and other protruding things and then n o i t a m r o f n I l u f e s U close all terminal covers. Do not drop or hit the computer against solid objects. Do not grip the display part. When you board an airplane, take the computer with you and never put it in your checked luggage. When using the computer on airplane, follow the air-
lines instructions. When carrying a spare battery, put it in a plastic bag to protect its terminals. Be careful of computer drop resulting from the hand strap damage. Use only the included stylus to touch the screen. Do not place any object on its surface and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens). Do not use the stylus when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/stylus can scratch the screen surface or ob-
struct the stylus operation. Use the stylus only for touching the screen. Using it for any other purpose may damage the stylus and result in scratches on the screen. 30 When using peripheral devices Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction manuals of the peripheral devices. Use the peripheral devices conforming to the computers specications. Connect to the connectors in the correct direction. If it is hard to insert, do not try forcibly but check the connectors shape, direc-
tion, alignment of pins, etc. If screws are included, fasten them securely. Remove the cables when you carry the computer. Do not pull the cables forc-
ibly. Preventing your computer from unauthorized use via wireless LAN/Blue-
tooth/Wireless WAN
<Only for model with wireless LAN/Bluetooth/Wireless WAN>
Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate security settings such as data encryption. Computrace Software Computrace software tracks your stolen computer. Computrace software is not included or installed in this computer. Consult Absolute Software Corp. before disposal. Refer to the following URL for Computrace software for installation and avail-
able service regions. Note that this service is only available in certain regions. http://www.absolute.com n o i t a m r o f n I l u f e s U Maintenance Wipe with a soft dry cloth such as gauze. To clean areas other than the LCD panel Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly. CAUTION Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause malfunction or damage. 31 Reinstalling Software Reinstalling software will return the computer to the default condition. When you reinstall the software, the ash memory data will be erased. Back up important data to other media or an external hard disk before reinstalla-
tion. Preparation Prepare the following items:
The Product Recovery DVD-ROM (included) Product Recovery DVD-ROM Windows Vista Business SP1 Product Recovery DVD-ROM Windows XP Professional SP2 Panasonic USB CD/DVD drive (optional) (refer to recent catalogs and other sources for information about the products available) Remove all peripherals (except for the CD/DVD drive). Connect the AC adaptor and do not remove it until reinstallation is com-
plete. Turn off the computer and connect the CD/DVD drive to the USB port ( page 17). Turn on the computer, and press
(F2) or
(Del) while [Panasonic] boot screen is displayed. The Setup Utility starts up. If the password is requested, enter the Supervisor Password.
1 2 n o i t a m r o f n I l u f e s U 3 Write down all of the contents of the Setup Utility and
(F9).
(Enter).
(F10). press At the conrmation message, select [Yes] and press Press At the conrmation message, select [Yes] and press The computer will restart. Press
(F2) or screen is displayed. The Setup Utility starts up. If the password is requested, enter the Supervisor Password. Set the Product Recovery DVD-ROM into the CD/DVD drive. Select the [Exit] menu, then select your CD/DVD drive in
[Boot Override].
(Del) while [Panasonic] boot
(Enter).
4 5 6 7 32 8 9 Press The computer will restart.
(Enter). Click [Reinstall Windows] and click [Next]. The License Agreement screen appears. 10 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next]. 11 Select the settings and click [Next].
[Reinstall Windows to the whole Hard Disk to factory default.]
You will have a single partition.
[Reinstall Windows to the operating system partition.]
You can keep the partition structure. n o i t a m r o f n I l u f e s U 12 At the conrmation message, click [YES]. Reinstallation starts automatically. (It will take approximately 30 minutes.) Do not interrupt reinstallation, for example by turning off the computer or
, pressing become unavailable as Windows may not start up or the data may be corrupted.
(Del). Otherwise reinstallation may and
13 Remove the Product Recovery DVD-ROM, and then click
[OK] to turn off the computer, then remove the CD/DVD drive. 14 Turn on the computer. If the password is requested, enter the Supervisor Password. 15 Perform the steps 3 and 4 for setting up the computer (
pages 25 to 26). 16 Start the Setup Utility and change the settings as neces-
sary. 17 Perform Windows Update. 9 to execute [1. [Recovery]]. Press The License Agreement screen appears. To cancel partway, press
. 10 Press to select [1. Yes, I agree to the provisions above and wish to continue!]. 33 Reinstalling Software 11 Select the settings.
[2]: Enter the size of operating system partition and press Enter.
(The size of data partition will be determined by subtracting the operating system partition size from the maximum size.)
[3]: Windows will be installed in the rst partition.
(The size of the rst partition must be XX GB or more. If smaller, installation will not be possible.)
. At the conrmation message, press Reinstallation starts automatically. (It will take approximately 30 - 75 min-
utes.) Do not interrupt reinstallation, for example by turning off the computer or or
, pressing become unavailable as Windows may not start up or the data may be corrupted.
(Del). Otherwise reinstallation may and
n o i t a m r o f n I l u f e s U 12 Remove the Product Recovery DVD-ROM, and then press any key to turn off the computer. If additional instructions are included with the computer, be sure to read them. It may be necessary to perform additional operations during the following procedure. 13 Turn on the computer. If the password is requested, enter the Supervisor Password. 14 Perform the steps 3, 4 and 5 for setting up the computer
( pages 25 to 27). 15 Start the Setup Utility and change the settings as neces-
sary. Installing Windows Vista NOTE This computer is provided the license of Microsoft Windows Vista Business
(including a downgrade right to Microsoft Windows XP Professional). Follow the steps below to install Windows Vista. 1 Reinstall Windows XP to the whole ash memory drive to factory default ( page 32). 34 2 When the message [[Recovery] is complete.] appears, remove the Product Recovery DVD-ROM for Windows XP, and set the Product Recovery DVD-ROM for Windows Vis-
ta. Press any key to turn off the computer. If you turn off the computer without replacing the Product Recovery DVD-
ROM or performing setting up the computer for Windows XP, refer to step 1-6 Reinstalling Software ( page 32), and boot the computer from the Product Recovery DVD-ROM for Windows Vista. Turn on the computer. Perform the reinstallation for Windows Vista from step 7
( page 32). Select [Reinstall Windows to the whole Hard Disk to factory default.] in the step 11 ( page 33). 3 4 5 NOTE The information about Windows Vista on the Panasonic personal computer Visit the following web site:
https://eww.pavc.panasonic.co.jp/pc/itn/support/vistaxpdwg1.html n o i t a m r o f n I l u f e s U 35 Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the Reference Manual. For a software prob-
lem, refer to the softwares instruction manual. If the problem persists, contact Panasonic Technical Support ( page 54). You can also check the computers status in the PC Information Viewer
Reference Manual Checking the Computers Usage Status). Connect the AC adaptor. Insert a fully charged battery. Remove the battery pack and the AC adaptor, then con-
nect them again. If a device is connected to the USB port, disconnect the device, or set [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility. (
ence Manual Setup Utility) Refer-
Leave it in an environment of 5 C {41 F} or higher tem-
perature for about an hour, then turn on the power again. Supervisor Password or User Password: Contact Pana-
sonic Technical Support ( page 54). Administrator password:
If you have a password reset disk, you can reset the ad-
ministrator password. Set the disk and enter any wrong password, then follow the on-screen instructions and set a new password. If you do not have a password reset disk, reinstall (
page 32) and set up Windows, and then set a new pass-
word. Starting Up Cannot start up. The power indicator or battery indicator is not lit. Cannot turn on the computer. The computer does not resume from sleep (
/standby
(The power indicator blinks quickly in green.)
) You have forgotten the password. g n i t o o h s e l b u o r T 36 Starting Up Remove disks or other media. Press any key to restart or a similar mes-
sage appears. Windows startup and operation is slow. A oppy disk is in the drive and it does not contain system startup information. Remove the oppy disk and press any key. If a device is connected to the USB port, disconnect the device, or set [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility. (
ence Manual Setup Utility) Refer-
If the problem persists after having tried the above solu-
tions, it may be a ash memory failure. Contact Panasonic Technical Support ( page 54). Press
(F9) in the Setup Utility (
Reference Manual Setup Utility) to return the Setup Utility settings
(excluding the passwords) to the default values. Start the Setup Utility and make the settings again. (Note that the processing speed depends on the application software, so this procedure may not make Windows faster.) If you installed a resident software after purchase, turn off the residence. Disable the pop-up menu and Input Panel Tab. A Open the Input Panel, and click [Tools] - [Options] -
B Remove the check mark of [Show the Input Panel tab]
[Opening]. and click [OK]. Disable Indexing Service in the following menu. Click [start] - [Search] - [Change preferences] - [With Indexing Service (for faster local service)]. g n i t o o h s e l b u o r T 37 Troubleshooting (Basic) Make the correct settings. Click Region] - [Date and Time].
(Start) - [Control Panel] - [Clock, Language, and Click [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time]. If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic Technical Support (
page 54). When the computer is connected to LAN, check the date The 2100 A.D. or later year will not be correctly recognized and time of the server. on this computer. The Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn on. The password you have set in the Setup Utility is not requested at resuming. To use the password security at resuming, set the Windows password. A Click
(Start) - [Control Panel] - [Add or remove user accounts] and select the account, and set the pass-
word. B Click
(Start) - [Control Panel] - [System and Main-
tenance] - [Require a password when the computer wakes] and add a check mark for [Require a pass-
word]. Set the Windows password. The password you have set in the Setup Utility is not requested at resuming. A Click [start] - [Control Panel] - [User Accounts] and select the account, and set the password. B Click [start] - [Control Panel] - [Performance and Main-
tenance] - [Power Options] - [Advanced] and add a check mark for [Prompt for password when computer resumes from standby]. Starting Up The date and time are incorrect.
[Executing Battery Recalibration]
screen appears.
[Enter Password]
does not appear when resuming from sleep (
/standby
hibernation.
) or g n i t o o h s e l b u o r T 38 Starting Up Cannot resume. Other startup problems. An error may occur when the computer automatically enters the sleep (
) or hibernation mode while the screensaver is active. In this case, turn off the screensaver or change the pattern of the screensaver.
) / standby (
If you press and hold the power switch for 4 seconds or longer, the power will be turned off forcibly and the computer will not resume. In this case, all unsaved data will be lost. You disconnected the AC adaptor and the battery pack while The battery is exhausted. Sleep (
) / standby (
) / standby
). If the computers power supply is discon-
the computer was in sleep (
nected in sleep (
unsaved data will be lost and the computer will not resume.
) / stand-
) and hibernation consume some power. Reference Manual Setup Utility) to return the Setup Utility settings
(excluding the passwords) to the default values. Start the Setup Utility and make the settings again.
(F9) in the Setup Utility (
Press by (
), Remove all peripheral devices. Check to see if there was a disk error. A Remove all peripheral devices including an external display. B Click
(Start) - [Computer] and right-click [Local Disk
(C:)], and click [Properties]. C Click [Tools] - [Check Now]. A standard user needs to enter an administrator password.
[Start]. D Select the option in [Check disk options] and click E Click [Schedule disk check] and restart the computer. g n i t o o h s e l b u o r T A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties]. B Click [Tools] - [Check Now]. C Select the option in [Check disk options] and click
[Start]. 39 Troubleshooting (Basic) Starting Up Other startup problems.
(continued) Shutting down Windows does not shut down. Display No display. g n i t o o h s e l b u o r T Start the computer in Safe Mode and check the error details. When the [Panasonic] boot screen disappears*1 at startup, press and hold Advanced Options Menu is displayed.
(F8) until the Windows
*1 When [Password on boot] is set to [Enabled] in the [Secu-
rity] menu of the Setup Utility, [Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you enter the password and press
(Enter), press and hold
(F8).
Remove the USB device. Wait one or two minutes. It is not a malfunction. The external display is selected. Press
switch the display. Wait until the display has been switched completely before pressing again.
When using an external display, Check the cable connection. Turn on the display. Check the settings of external display.
) to
) The display is turned off by the power-saving function. To resume, do not press the direct selection keys, but press any other key like The computer entered sleep (
) / standby
) or hibernation by the power-saving func-
tion. To resume, press the power switch. The screen may not be displayed even after the computer resumed from standby or hibernation. In this case, press
) to enter standby and resume the computer
again. The screen is dark. The screen is darker when the AC adaptor is not connect-
) and adjust the brightness. As you ed. Press increase the brightness, battery consumption increases. You can separately set the brightness for when the AC
adaptor is connected and when not connected. 40 Display The LCD brightness changes a number of times when the AC adaptor is dis-
connected. The screen is disor-
dered. During Simultane-
ous display, one of the screens be-
comes disordered. Intel(R) Display Power Saving Technology is active and automatically changes the LCD brightness. This is not a malfunction. Changing the number of display colors and resolution may affect the screen. Restart the computer. Connecting/disconnecting an external display may affect the screen. Restart the computer. Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.). When using the Extended Desktop, use the same display colors for the external display as those used by the LCD. If you continue to experience problems, try changing the display. Right-click on the desktop, and click [Graphics Properties]
- [Display Devices]. If the [Command Prompt ] is displayed in full-screen, reduce the display size. The external display does not work nor-
mally. If the external display does not support the power saving function, it may not work normally when the computer enters the power saving mode. Turn off the external display. g n i t o o h s e l b u o r T 41 Troubleshooting (Basic) Display
<Only for model with GPS>
The cursor cannot be controlled prop-
erly. Operate the following steps. A Set [GPS] to [Disabled] in the [Advanced - Serial Port Conguration] of the Setup Utility. B Press
(F10) and select [Yes] at the conrma-
tion message, and press The computer will restart.
(Enter). C Log on to Windows as an administrator. D Click
(Start) and input c:\util\drivers\gps\GPSVista. reg in [Start Search], and press
(Enter).
(F2) while [Panasonic] boot screen is E Click [Yes] and click [OK]. The computer will restart. F Press
displayed. Conguration]. H Press
G Set [GPS] to [Enabled] in the [Advanced - Serial Port
(F10) and select [Yes] at the conrma-
tion message, and press
(Enter). Touchscreen The cursor does not work. When using the external mouse, connect it correctly. Restart the computer using the keyboard. Press
(Windows) and press to select [Restart] and press three times, and press
(Enter). Press
(Windows), and to select [Restart]. If the computer does not respond to keyboard commands, read No response. ( page 43). Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main]
menu of the Setup Utility. Perform the touchscreen calibration ( pages 26). g n i t o o h s e l b u o r T Cannot input using the touchscreen. Cannot point the correct position using the included stylus. 42 Reference Manual The Reference Manual is not dis-
played. Install Adobe Reader. A Log on to Windows as an administrator. B Click
[Start Search] then press
(Start) and input c:\util\reader\setup.exe in
(Enter). Click [start] - [Run], input c:\util\reader\setup.exe, then click [OK]. Follow the on-screen instructions. C Update Adobe Reader to its latest version. If your computer is connected to the internet, start up Adobe Reader and click [Help] - [Check for Updates]. Others No response. Press
(Shift),
(ESC) to open Task Manager and close the software application that is not responding. and An input screen (e.g., password input screen at startup) may be hidden behind another window. Press to check.
Press the power switch for 4 seconds or longer to shut down the computer, and then press the power switch to turn it on. If the application program does not work nor-
mally, uninstall and reinstall the program. To uninstall:
Click
(Start) - [Control Panel] - [Uninstall a program]. Click [start] - [Control Panel] - [Add or Remove Programs]. g n i t o o h s e l b u o r T 43 LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (PROGRAMS) FURNISHED WITH THIS PANASONIC PRODUCT (PRODUCT) ARE LICENSED ONLY TO THE END-
USER (YOU), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (MEI) has developed or otherwise ob-
tained the Programs and hereby licenses their use to you. You assume sole re-
sponsibility for the selection of the Product (including the associated Programs) to achieve your intended results, and for the installation, use and results obtained therefrom. LICENSE A. MEI hereby grants you a personal, non-transferable and non-exclusive right and license to use the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are receiving only a LIM-
ITED LICENSE TO USE the Programs and related documentation and that you shall obtain no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms, concepts, designs and ideas represented by or incorporated in the Programs and related documenta-
tion, all of which title, ownership and rights shall remain with MEI or its suppli-
ers. B. You may use the Programs only on the single Product which was accompa-
nied by the Programs. C. You and your employees and agents are required to protect the condentiality of the Programs. You may not distribute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-
wise, without the prior written consent of MEI. D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or attempt to modify, the Programs. E. You may transfer the Programs and license them to another party only in connection with your transfer of the single Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation, to the same party or destroy any such copies not so transferred. x i d n e p p A 4444 F. You may not remove any copyright, trademark or other notice or product identi-
cation from the Programs and you must reproduce and include any such notice or product identication on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANI-
CALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PRO-
GRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EX-
PRESSLY PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PERMITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED. TERM This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may terminate this license at any time by destroying, at your expense, the Programs and related documentation together with all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all copies thereof in any form. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDER-
STAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-
MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. About Intel software products The enclosed software products and documentation were developed at private expense, and are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et. seq. or its successor. The use of this product by the government constitutes acknowledgment of Intels proprietary rights in the product. x i d n e p p A 4545 Contrat de licence dusage limit Le(s) logiciel(s) (les Logiciels) fournis avec ce produit Panasonic (le Produit) sont exclusivement concds en licence lutilisateur ultime (vous), et ils ne peuvent tre utiliss que conformment aux clauses contractuelles cidessous. En utilisant les logiciels, vous vous engagez de manire dnitive respecter les termes, clauses et conditions des prsentes. Matsushita Electric Industrial Co., Ltd. (MEI) a mis au point ou obtenu les Logiciels et vous en concde lutilisation par les prsentes. Vous assumez lentire responsabilit du choix de ce Produit (y compris des Logiciels associs) pour obtenir les rsultats escompts, ainsi que de linstallation, de lutilisation et des rsultats obtenus. Licence A. MEI vous octroie par les prsentes le droit et la licence personnels, non ces-
sibles et non exclusifs dutiliser les Logiciels conformment aux termes, claus-
es et conditions de ce contrat. Vous reconnaissez ne recevoir quun droit limit dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez nobtenir aucun droit de titre, proprit ni aucun autre droit vis--vis des Logiciels et de la documentation les accompagnant ni vis--vis des algo-
rithmes, concepts, dessins, congurations et ides reprsents par ou incor-
pors dans les Logiciels et la documentation les accompagnant, dont les titres, proprit et droits resteront tous MEI ou leurs propritaires. B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accom-
pagn par les Logiciels. C. Vous et vos employs ou agents tes requis de protger la condentialit des Logiciels. Vous ne pouvez ni distribuer ni mettre les Logiciels et la documenta-
tion les accompagnant la disposition dun tiers, par partage de temps ou de quelque autre manire que ce soit, sans lautorisation crite pralable de MEI. D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documentation les accompagnant pour quelque n que ce soit, lexception dune (1) copie des Logiciels des ns de sauvegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagn par les Logiciels. Vous ne pouvez ni modier ni tenter de modier les Logiciels. E. Vous ne pouvez cder les Logiciels et en octroyer la licence une autre partie quen rapport avec votre cession du Produit unique qui est accompagn par les Logiciels cette autre partie. Au moment de cette cession, vous devez cder galement toutes les copies, que ce soit sous forme imprime ou lisible par la machine, de tous les Logiciels ainsi que de la documentation les accom-
x i d n e p p A 4646 pagnant, la mme partie ou dtruire les copies non cdes. F. Vous ne pouvez retirer aucune marque de droits dauteur, marque de com-
merce ou autre ni aucune identication de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identications de produit sur toutes les copies des Logiciels. Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs copies, de faon lectronique ou mcanique, en tout ou en partie. Vous ne pouvez utiliser, copier, modier, altrer ni cder les Logiciels ni aucune de leurs copies, en tout ou en partie, lexception de ce qui est expressment stipul dans ce contrat. Si vous cdez la possession de toute copie ou de tout Logiciel une autre partie, lexception de ce qui est autoris au paragraphe E ci-dessus, votre licence est automatiquement rsilie. Termes, clauses et conditions Cette licence nest effective que pour la dure de possession ou de crdit-bail du Produit, moins dune rsiliation antrieure. Vous pouvez rsilier cette licence tout moment en dtruisant, vos frais, les Logiciels et la documentation les ac-
compagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera galement rsilie, avec application immdiate, si les conditions de rsiliation dnies ailleurs dans ce contrat se sont ralises ou si vous ne re-
spectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la rsiliation, vous acceptez de dtruire, vos frais, les Logiciels et la docu-
mentation les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accept de respecter ses termes, clauses et conditions. Vous reconnaissez en outre quils sont la description complte et exclusive du contrat conclu entre nous, contrat qui remplace et annule toute proposition ou contrat prcdent, crit ou oral, et toute autre communication entre nous, relativement lobjet du prsent contrat. x i d n e p p A 4747 Specications This page provides the specications for the basic model. The model number is different according to the unit conguration. To check the model number:
Check the bottom of the computer or the box the computer came in at the time of purchase. To check CPU speed, memory size and the ash memory disk drive (HDD) size:
Run the Setup Utility (
[Information] menu.
[Processor Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]:
Flash memory drive size Reference Manual Setup Utility) and select Main Specications Model No. CPU/
Secondary cache memory Chipset Main Memory*2 Video Memory Flash Memory Drive Display Method Internal LCD Wireless LAN BluetoothTM Sound Card Slot Interface SD Memory Card Slot*6 x i d n e p p A Keyboard / Pointing Device Button Power Supply AC Adaptor*8 4848 CF-U1AQBXZAM CF-U1AQBXZJM Intel Atom Processor Z520 (1.33 GHz, 512 KB*1 cache, 533 MHz FSB) Intel System Controller Hub 1 GB*1 DDR2 SDRAM (1 GB*1 Max.) 256 MB*1 Max.*3 16 GB*4 5.6 WSVGA type (TFT) (1024 600 dots) 65,536/16,777,216 colors (800 600 dots/1024 600 dots/1024 768 dots)*5 Intel WiFi Link 5100 ( page 50 Wireless LAN)
( page 50 Bluetooth) WAVE and MIDI playback, Monaural speaker, Intel High Denition Audio subsystem support x 1 USB port (4-pin, USB 2.0)*7 x 1, Microphone Jack (Minia-
ture jack, 3.5 DIA, Stereo), Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4 mW x 2, Stereo), Expansion Bus Connector (Dedicated 19-pin female), 61 keys US or UK English Mini Qwerty Keyboard /
Touchscreen Scroll (up/down), Zoom (up/down) Application 4 AC adaptor or Battery pack Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 16.0 V DC, 3.75 A Main Specications Model No Battery Pack Operating Time*9 Charging Time*10 Clock Battery Power Consumption*11 Power on Power off Physical Dimensions (W D H)
(excluding the hand strap) Weight
(including the hand strap) Operation Environment Storage Environment Software Model No Operating System*13 Utility Programs CF-U1AQBXZAM CF-U1AQBXZJM Li-ion 7.2 V, 2900 mAh x 2 packs Approx. 9 hours Approx. 10 hours Approx. 7 hours Coin type lithium battery 3.0 V Approx. 12 W*12 / Approx. 20 W (Maximum when re-
charging in the ON state) 184 mm 151 mm 57 mm {7.24" 5.94" 2.24"}
Approx. 1.06 kg {Approx. 2.34 lb.}
Temperature: 5 C to 35 C {41 F to 95 F}
Humidity: 30% to 80% RH (No condensation) Temperature: -20 C to 60 C {-4 F to 140 F}
Humidity: 30% to 90% RH (No condensation) CF-U1AQBXZJM Windows Vista Business Service Pack 1 CF-U1AQBXZAM Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies Adobe Reader 8, PC Information Viewer, Full Screen Zoom, Keyboard Button Manager, Intel PROSet/Wire-
less WiFi Connection Utility, Bluetooth Stack for Windows by TOSHIBA, Wireless Switch Utility, Hotkey Settings, Battery Recalibration Utility, Setup Utility x i d n e p p A 4949 Specications Wireless LAN <Only for model with wireless LAN>
Data Transfer Rates IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automati-
cally switched)*14 IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)*14 IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automati-
cally switched)*14 IEEE802.11n:
(HT20) 144.4/130/117/115.6/104/86.7/78/65/58.5/57.8/
52/43.3/39/28.9/26/19.5/14.4/13/6.5 Mbps (automatically switched)*14
(HT40) 300/270/243/240/216/180/162/130/120/117/108/
104/90/81/78/60/54/52/39/30/27/26/13 Mbps (automati-
cally switched)*14 IEEE802.11a/IEEE802.11b/IEEE802.11g/IEEE802.11n
(Draft 2.0) OFDM system, DS-SS system IEEE802.11a: Channels 36/40/44/48/52/56/60/64/100/
104/108/112/116/132/136/140/149/153/157/161/165 IEEE802.11b/IEEE802.11g: Channels 1-11 IEEE802.11n: Channels 1-11 /36/40/44/48/52/56/60/
64/100/104/108/112/116/132/136/140/149/153/157/161/
165 IEEE802.11a: 5.18 GHz - 5.32 GHz, 5.5 GHz - 5.58 GHz, 5.66 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz IEEE802.11b/IEEE802.11g: 2.412 GHz - 2.462 GHz IEEE802.11n: 2.412 GHz - 2.462 GHz, 5.15 GHz - 5.35 GHz, 5.5 GHz - 5.58 GHz, 5.66 GHz - 5.7 GHz, 5.745 GHz - 5.825 GHz Standards Supported Transmission method Wireless Channels Used RF Frequency Band BluetoothTM <Only for model with Bluetooth>
Bluetooth Version Transmission method Wireless Channels Used RF Frequency Band 2.0 + EDR FHSS system Channels 1 to 79 2.402GHz - 2.48 GHz
*1 1 KB = 1.024 bytes / 1 MB = 1,048,576 bytes / 1 GB = 1,073,741,824 bytes
*2 You can physically expand the memory up to 4 GB, but the total amount of usable memory available will be less depending on the actual system conguration.
*3 A segment of the main memory is allotted automatically depending on the computers operating status. The size of the Video Memory cannot be set by the user. The size of Video memory is allotted depending on the operating system.
*4 1 GB = 1,000,000,000 bytes. Your operating system or some application software will report as fewer GB. x i d n e p p A
*5 A 16,777,216 color display is achieved by using the dithering function. 5050 6 This slot is compatible with High-Speed Mode. Operation has been tested and con-
rmed using Panasonic SD/SDHC Memory Cards with a capacity of up to 8 GB. Opera-
tion on other SD equipment is not guaranteed.
*7 Does not guarantee operation of all USB-compatible peripherals.
*8 <Only for North America>
The AC adaptor is compatible with power sources up to 240 V AC adaptor. This com-
puter is supplied with a 125 V AC compatible AC cord. 20-M-2-1
*9 Measured at (LCD brightness: 60 cd/m2) Varies depending on the usage conditions, or when an external device is attached.
*10 Varies depending on the usage conditions.
*11 Approx. 0.9 W when the battery pack is fully charged (or not being charged) and the computer is OFF.
*12 Rated power consumption 23-E-1
*13 Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is installed by using the Product Recovery DVD-ROM provided by Panasonic.
*14 These are speeds specied in IEEE802.11a+b+g+n standards. Actual speeds may differ. x i d n e p p A 5151 LIMITED WARRANTY For U.S.A. Panasonic Computer Solutions Company - Worldwide Product Warranties Section 1 - Limited Warranty - Hardware Panasonic Computer Solutions Company (referred to as Panasonic) will repair the prod-
ucts listed below with new or rebuilt parts, free of charge in the U.S.A. or other Panasonic approved location for the period specied below from the date of original purchase in the event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before warranty performance is rendered. Laptop Computers 3 Years PDRC - LCD and Keyboard Assemblies 3 Years MDWD Mobile Computer and Wireless Display Assemblies (CF-07/CF-08) - 3 Years Hand-held Computers (CF-P1/CF-P2) 1 Year Arbitrator Video Camera 1 Year Arbitrator Recorder Unit 1 Year Arbitrator Remote Control Panel 1 Year Arbitrator Wireless Receiver Unit 1 Year Arbitrator P2 Card(s) (All Sizes) 1 Year Arbitrator Wireless Microphone(s) / Transmitter 90 Days Arbitrator System Component Interconnect Cables 90 Days Main Battery The battery supplied with the product is covered under the warranty for one (1) year from date of purchase, except as excluded in Section 3. Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A battery furnished under the warranty is covered for the remaining period of the one year warranty on the original or purchased battery. Options and Accessories x i d n e p p A The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period specied from the date of purchase or as specically stated:
AC Adaptor / Power Cord 3 Years Memory Card (Panasonic Brand) 3 Years Car Mount Docking Station PCB or Complete Vehicle Docking Station 3 Years Port Replicator / I-O Box / Device Cradle (like CF-08) 3 Years Antenna Pass-through Cable 3 Years Backlit or Full-sized keyboard - 3 Years or assumes warranty of the unit in which it is installed 5252 Integrated Panasonic supplied options and kits including, but not limited to Wireless WAN, Media Bay Drives (Floppy, CD/DVD), GPS, Bluetooth, Smartcard Reader, and Fingerprint readers 3 Years or assumes warranty period of the unit in which it is installed provided the integration was performed by Panasonic or an Authorized Options Integrator. Hard Drive (separately purchased) 1 Year External USB Drives (CD / DVD / Floppy / Hard Drive) 1 Year Optional Battery 1 Year Battery Charger 1 Year Standard or Digitizer Stylus Pens 90 Days (physical damage excluded) Section 2 - Limited Warranty - Software Panasonic Computer Solutions Company (referred to as Panasonic) warrants to you only that the disk(s) or other media on which the Programs are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof to you, as evidenced by your purchase receipt. This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media Panasonics entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States or other Panasonic designated location, of any defective disk or other media which is returned to Panasonics Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. The customer is responsible for ensuring that all data is backed up and made secure during normal use and before sending a unit for service. Section 3 - Limited Warranty Exclusions Specically excluded from the warranty are:
All consumable items; such as screen protection lms, logo badges, labels, cleaning cloths, carry cases, manuals, cables, straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a separate warranty. Failures related to the product operating system, hard drive image, software setup, software program, virus, other program(s) or le(s) on the hard drive or in any com-
puter memory location. Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit. Any unit or device with a missing or altered model number or serial number label Damage which occurs in shipment Failures which are caused by products not supplied by Panasonic Failures which result from alteration, accident, misuse, introduction of liquid or other x i d n e p p A 5353 LIMITED WARRANTY foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance or modication, use not in accordance with product use instructions Failures due to service by anyone other than a Panasonic Authorized Service Provider Failures caused by improper integration by any company other than Panasonic Conguration and Integration Centers. Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser Damage that is attributable to acts of God This warranty only covers failures due to defects in materials or workmanship which occur during normal use. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIR-
CRAFT COCKPIT EQUIPMENT/SYSTEMS*1. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
*1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag
(EFB) Systems and Class1 EFB Systems when used during critical phases of ight
(e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No.36 Other Limits and Exclusions: There are no other express warranties except as listed above. PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specic legal rights, and you may also have other rights which vary from state to state. For technical support or to arrange for service on your Panasonic computer product, call our toll-free 24 hours hotline at 1-800-LAPTOP5. DIAL TOLL FREE: 1-800-LAPTOP5 (1-800-527-8675) Web Site : www.panasonic.com/toughbook x i d n e p p A 5454 For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PCI) warrants to you, the rst end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specied. Type of Failure Cover-
Scope of Coverage age Defective Materials or Workmanship Laptop Computers (except Period of Coverage Battery) and AC Adaptor Three (3) Years from Date of Original End User Customer Purchase Factory/PCI installed options including Wireless WAN, GPS, Bluetooth, Fingerprint reader, Backlit keyboard, Memory Card and Media Bay Drives (Floppy, CD/DVD) Mobile Wireless Display PDRC LCD and Keyboard Assemblies Port Replicator Hand-held Computers Battery Battery charger Auto Adaptor External USB Drives Standard or Digitizer Stylus Pen Ninety (90) Days from One (1) Year from Date of Original End User Cus-
tomer Purchase Defective Materials or Workmanship Defective Materials or Workmanship Date of Original End User Customer Purchase No Coverage All consumable items including protection lm, cleaning cloth, carry case, tether and harness Remedy In the event of a warranty claim, contact PCIs representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*2. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES. x i d n e p p A 5555 LIMITED WARRANTY
*2 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag
(EFB) Systems and Class1 EFB Systems when used during critical phases of ight
(e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No.36 IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier. SOFTWARE MEDIA LIMITED WARRANTY Coverage PCI warrants to you, the rst end user customer, that the disk(s) or other media on which software program(s) is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the software licensors written warranty (accompanying the copy of the software) for any software warranty claim. Claim Procedure In the event of a defect in material or workmanship in the media during the sixty (60) days warranty period, and you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Mississauga, Ontario L4W 2T3, within the warranty period, together with a copy of your purchase re-
ceipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media. Remedy PCIs entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only. It does not cover any other damages, including, but not limited to, loss of use or prot loss, or special, indirect or consequential damages, or other claims, whether or not of similar character. No Coverage This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmental conditions other than those specied by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modication or attempted modication of the program, or if damaged by accident or act of God. PCI is not responsible for damage to or loss of any program, data or removable storage media. GENERAL NO OTHER WARRANTIES PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES. NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL. IN ANY EVENT, PCIS MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE COMPUTER PRODUCT. NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION AROSE. Statutory Warranties Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you. x i d n e p p A 5656 GARANTIE LIMITE Pour le Canada GARANTIE LIMITE ORDINATEURS ET PRIPHRIQUES PANASONIC Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que ce produit informatique ( lexclusion des supports des logiciels) est, au moment de sa vente par PCI ou dun revendeur agr par PCI, exempt de dfauts de pices et de fabrication dans les conditions normales dutilisation, et ce, pendant la priode de couverture de la garantie, sous rserve des modalits dcrites ci-dessous. lments couverts Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur Options installes en usine/par Dure de couverture Trois (3) ans partir de la date dachat original. Type de couverture Dfauts de pices et de fabrication PCI incluant : WAN sans l, GPS, Bluetooth, lecteur dempreintes digitales, clavier rtroclair, carte mmoire et lecteurs (disquettes, CD/DVD) cran mobile sans l Ensembles PDRC ACL et clavier Duplicateur de port Ordinateurs de poche Batterie Chargeur de batterie Adaptateur pour voiture Priphriques USB Stylo pointeur standard ou pour numriseur graphique Tous les articles consommables incluant les pellicules protectrices, chiffons de nettoyage, tuis de transport, longes et sangles Un (1) an partir de la date dachat original. Dfauts de pices et de fabrication Quatre-vingt-dix (90) jours partir de la date dachat original. Aucune couverture Dfauts de pices et de fabrication Recours Pour obtenir des informations sur la marche suivre dans le cas o une rclamation en vertu de la garantie deviendrait ncessaire, communiquez par tlphone avec un reprsentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de lEst) du lundi au vendredi (sauf les jours fris), avant lchance de la garantie applicable, en prenant soin didentier la nature de la dfaillance. Un reu ou toute autre pice justicative de la date dachat original sera exig avant toute rparation. Toute pice dfectueuse couverte par la prsente garantie limite sera rpare ou remplace par une pice neuve ou remise neuf. Le remplacement ou la rparation sera fait conformment aux modalits de la prsente garantie limite pendant la dure restante de la priode originale de la garantie. Produits non couverts La prsente garantie limite ne couvre pas les produits achets lextrieur du Canada. Elle ne couvre pas non plus les dommages, la dfaillance ou les dfauts attribuables une manutention inadquate, une mauvaise installation, une x i d n e p p A 5757 GARANTIE LIMITE utilisation anormale ou abusive, de la ngligence, un accident, un dversement ou la pntration dun objet tranger, une modication, un cas fortuit ou une rparation effectue par une personne non agre par PCI. CE PRODUIT NEST PAS DESTIN TRE UTILIS, EN TOUT OU EN PARTIE, COMME SYSTME/QUIPEMENT NUCLAIRE, SYSTME/ QUIPEMENT DE CONTRLE DU TRAFFIC ARIEN OU SYSTME/QUIPEMENT DE POSTE DE PILOTAGE DAVION*3. PANASONIC DCLINE TOUTE RESPONSABILIT CONCERNANT LUTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNS.
*3 Les SYSTMES/QUIPEMENTS DE POSTE DE PILOTAGE DAVION sont dots de systmes OEPP (organiseur lectronique de poste de pilotage) de classe 2 et de classe 1 utiliss pendant des phases critiques de vol (par exemple, pendant le dcollage et latterrissage) et(ou) monts sur lavion. Les systmes OEPP de classe 1 et de classe 2 sont dnis par le circulaire dinformation FAA: AC (Advisory Circular) 120-76A ou le feuilet n 36 JAA: JAA TGL (Temporary Guidance Leaets) No 36. EXPDITION DU PRODUIT POUR SERVICE SOUS GARANTIE Emballez soigneusement le produit, de prfrence dans son emballage dorigine. Joignez une description de la dfaillance de mme quune pice justicative de la date dachat. Panasonic Canada Inc. ne peut tre tenue responsable pour tout dommage ou perte subi pendant le transport si vous avez choisi le transporteur. GARANTIE LIMITE SUPPORTS DES LOGICIELS Couverture Panasonic Canada Inc. ( PCI ) garantit lacheteur original que la ou les disquettes ou tout autre support sur lequel le ou les programmes sont fournis sont exempts de dfauts de pices et de fabrication dans des conditions normales dutilisation au Cana-
da, et ce, pour une priode de soixante (60) jours suivant la date de rception indique sur la preuve dachat. LA PRSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUP-
PORTS DE LOGICIELS. PCI ne garantit pas les logiciels. Reportez-vous la garantie crite du concdant de licence dutilisation du logiciel (qui accompagne la copie du logiciel) pour toute rclamation en vertu de la garantie. Rclamation marche suivre Panasonic Canada Inc. remplacera toute disquette ou support dfectueux si larticle en question est retourn, port pay, son service de Marketing produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soixante
(60) jours suivant la date dachat original. Joignez votre envoi une pice justicative de votre achat et une description du problme. Recours La responsabilit de PCI - et votre seul recours - dans le cas de toute dfaillance couverte par la garantie sur ce support de logiciel est limite au seul remplacement du sup-
port. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte dusage ou de prots, ni aucun dommage spcial, indirect ou conscutif, ni aucune autre rclamation de nature similaire ou autre. Produits non couverts La prsente garantie limite ne sapplique pas si la ou les dis-
quettes ou autre support ont t utiliss dans un produit dune marque autre que Panasonic ou dans des conditions environnementales autres que celles spcies par PCI ou le fabricant, ou soumis une mauvaise utilisation, la ngligence, une manutention inadquate ou encore si le programme a t modi ou subi une tentative de modication ou des dommages at-
tribuables un accident ou un cas fortuit. De plus, PCI nassume aucune responsabilit pour toute perte de, ou tout dommage , un programme, des donnes ou un support de sauvegarde amovible. 5858 x i d n e p p A GNRALITS PCI NE RECONNAT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET DUTILIT UNE FIN QUELCONQUE, LGARD DU LOGICIEL, SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PRIPHRIQUES ET ACCESSOIRES. SOUS AUCUNE CIRCONSTANCE PCI NE POURRA TRE TENUE RESPONSABLE DES DOMMAGES SPCIAUX, INDIRECTS OU CONSCUTIFS ATTRIBUABLES UN MANQUEMENT AUX GARANTIES LIMITES DCRITES DANS LE PRSENT DOCUMENT OU LUTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNES, DAFFAIRES, DACHALANDAGE OU DE PROFIT. DANS TOUS LES CAS, LA RESPONSABILIT MAXIMALE DE PCI POUR TOUT MANQUEMENT NE POURRA EXCDER LE PRIX DE VENTE DU PRODUIT INFORMATIQUE. AUCUNE RCLAMATION, SANS GARD SES MOTIFS, NE POURRA TRE FAITE AUPRS DE PCI PLUS DE DEUX (2) ANS APRS LES FAITS INVOQUS LA BASE DUNE TELLE RCLAMATION. Garantie statutaires Certaines juridictions interdisent de telles limitations ou exclusions;
aussi, pourraient-elles ne pas sappliquer. x i d n e p p A 5959 As an ENERGY STAR Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efciency. Outline of the International ENERGY STAR Ofce Equipment Program The international ENERGY STAR Ofce Equipment Program is an international program that promotes energy saving through the use of computers and other of-
ce equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are of-
ce equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations. For information about ENERGY STAR, refer to the following web site:
Web Site: www.energystar.gov 22-M-1 Panasonic Computer Solutions Company 3 Panasonic Way, Panazip 2F-5, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 2008 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan HS0708-0 DFQW5198ZA
1 2 3 4 | Users Manual RF Warning Addendum | Users Manual | 19.78 KiB | April 06 2009 |
< CF-U1 series Addendum for the external antenna(s) >
FCC RF Exposure Warning:
This equipment is provided with external antenna connector for connection to optional Car Mounter or Port Replicator for mobile external mounted antenna. External antenna must be professionally installed and can not exceed recommended maximum antenna gain as follows. The Car Mounter is provided with the maximum allowable antenna gain for the external WWAN base whip antenna for the BRS/EBS band (2496-2690MHz) is 8.74 dBi. Also, user must maintain minimum 20 cm spacing between external antenna and all persons body
(excluding extremities of hands, wrist and feet) during wireless modes of operation.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-06-04 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2501.4 ~ 2684.6 | TNB - Licensed Non-Broadcast Station Transmitter | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 5755 ~ 5795 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2009-06-04
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 3 4 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 3 4 |
Newark, New Jersey 07102-5490
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
ACJ
|
||||
1 2 3 4 | Equipment Product Code |
9TGCF-U14
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
B******** B******
|
||||
1 2 3 4 | Title |
Project Manager
|
||||
1 2 3 4 | Telephone Number |
201-3********
|
||||
1 2 3 4 | Fax Number |
201-3********
|
||||
1 2 3 4 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 | Name |
R****** O******
|
||||
1 2 3 4 | Physical Address |
6660-B Dobbin Road
|
||||
1 2 3 4 |
Columbia, Maryland 21045
|
|||||
1 2 3 4 |
United States
|
|||||
1 2 3 4 | Telephone Number |
410-2********
|
||||
1 2 3 4 | Fax Number |
410-2********
|
||||
1 2 3 4 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/19/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 | TNB - Licensed Non-Broadcast Station Transmitter | |||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Toughbook PC with WWAN, WLAN and Bluetooth | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Power output is conducted. This device is authorized to operate with the specific computer described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR values are: 5.2 GHz band - Body-worn: 0.093 W/kg; 5.3 GHz band - Body-worn: 0.077 W/kg; 5.5 GHz band - Body-worn: 0.104 W/kg. This device is restricted to indoor-only use for the 5150.0-5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. | ||||
1 2 3 4 | Power output listed is EIRP. This device is authorized to operate with the specific computer described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR values are: Body-worn: 1.05 W/kg. This device is classified as a mobile device with respect to RFx compliance when the external car-mount antenna(s) is(are) used. In that case, the maximum antenna gain permitted for cellular band operation is 8.74 dBi. | |||||
1 2 3 4 | Power output is conducted. This device is authorized to operate with the specific computer described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. End-users must be provided with operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Power output is conducted. This device is authorized to operate with the specific computer described in this filing. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. End-users must be provided with operating conditions for satisfying RF exposure compliance. The highest reported SAR values are: 2.4 GHz band - Body-worn: 0.061 W/kg; 5.8 GHz band - Body-worn: 0.064 W/kg. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 | Name |
R**** O******
|
||||
1 2 3 4 | Telephone Number |
410-2********
|
||||
1 2 3 4 | Fax Number |
410-2********
|
||||
1 2 3 4 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180 | 5240 | 0.0244 | 2.5 ppm | ||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5190 | 5230 | 0.0237 | 2.5 ppm | ||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC | 5260 | 5320 | 0.023 | 2.5 ppm | ||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC | 5270 | 5310 | 0.0188 | 2.5 ppm | ||||||||||||||||||||||||||||||||||
1 | 5 | 15E | CC | 5500 | 5700 | 0.0225 | 2.5 ppm | ||||||||||||||||||||||||||||||||||
1 | 6 | 15E | CC | 5510 | 5670 | 0.023 | 2.5 ppm | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 27 | 2501.40000000 | 2684.60000000 | 0.3080000 | 2.5000000000 ppm | 8M35G7D | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0233000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2412 | 2462 | 0.034 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC | 2422 | 2452 | 0.0338 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15C | CC | 5745 | 5825 | 0.0222 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15C | CC | 5755 | 5795 | 0.019 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC