FCC ID: ACJ96NKX-TGDA66 UPCS Cordless Handset

Installation Manual Additional Digital Cordless Handset Model No. KX-TGDA63 KX-TGDA66 Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone:

KX-TGD610/KX-TGD630/KX-TGD660

(The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base units operating instructions for further details. Please read this installation manual before using the unit and save it for future reference. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Printed in Malaysia PNQX9174ZA PP0521YL0 Installation Accessory information Supplied accessories Accessory item/Part number Charger*1 Rechargeable batteries/HHR-4DPA Handset cover*2, *3 Quantity 1 2 1

*1 PNLC1077ZB (Black), PNLC1077ZW (White)

*2 The handset cover comes attached to the handset.

*3 PNYNTGDA63BR (Black), PNYNTGDA63WR (White) Note:

R Please read the base units operating instructions for additional/replacement accessories. R Please read Graphical symbols for use on equipment and their descriptions of the base units operating instructions. For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support 2 For assistance, please visit http://shop.panasonic.com/support Installation Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not place the handset on the base unit when battery cover is removed. CAUTION Installation and location R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. R The product is only use for mounting at heights 2 m. Note:

R This height is not guaranteed for product reliability. R To prevent serious injuries due to the product unexpectedly falling, the product must be installed at a height of 1.5 m or lower. Battery R We recommend using the supplied batteries or additional/replacement batteries noted on page 2 for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. R Avoid the use in the following conditions:

High or low extreme temperatures during use, storage or transportation. Replacement of a battery with an incorrect type that can defeat a safeguard. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. For assistance, please visit http://shop.panasonic.com/support 3 Installation Extremely high temperature and/or extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Do not use the telephone to report a gas leak in the vicinity of the leak. 3. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS Other information R The applied nameplate is located at the bottom or rear of the product. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Notice for product disposal, transfer, or return R This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. 4 For assistance, please visit http://shop.panasonic.com/support Installation Specifications R Frequency range:

1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power:

115 mW (max.) R Power source:

120 V AC, 60 Hz R Power consumption:

Standby: 0.1 W Maximum: 1.8 W R Operating conditions:

0 C 40 C (32 F 104 F), 20 % 80 % relative air humidity (dry) Setting up Connections/Wall mounting Connect the AC adaptor to the power outlet. Drive the screws (

) (not supplied) into the wall, if necessary. 27.2 mm (1 1/16 inches) Note:

R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Battery installation/Battery charging Important:

R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 2. R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (

). For assistance, please visit http://shop.panasonic.com/support 5 1212121 Installation R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (

Charge for about 7 hours. R Confirm Charging is displayed (

R When the batteries are fully charged, Fully charged is displayed.

, Note:

R If the batteries are fully charged, but the operating time seems to be shorter,

) and the charge contacts with a dry cloth and

, clean the battery ends (

charge again. Removing the battery Handset key print For the following function, the key prints are different for the supplied handset and optional handset. n KX-TGDA66: For KX-TGD610/KX-TGD630 series users Function Supplied handset Flash MFLASHN Call waiting MCALL WAITN Optional handset

(KX-TGDA66) M M N*1/MFLASHN N*1/MFLASHN 6 For assistance, please visit http://shop.panasonic.com/support 214231212*1 The remote voice assist feature is only available for KX-TGD660 series. n KX-TGDA63: For KX-TGD660 series users Installation Function Supplied handset Remote voice assist M N Optional handset

(KX-TGDA63) MFLASHN/

MCALL WAITN Registering a handset to a base unit 1 Base unit:

Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 2 Handset:

Place the handset on the base unit or charger, then wait until a long beep sounds and is displayed. Note:

R If an error tone sounds, or if is displayed, register the handset according to the base units operating instructions. Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN FCC and other information This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. For assistance, please visit http://shop.panasonic.com/support 7 Installation WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:

1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Warning:

R This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. R This handset may not be collocated or operated in conjunction with any other antenna or transmitter. R For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements. Notice:

R FCC ID can be found inside the battery compartment or on the bottom of the unit. 8 For assistance, please visit http://shop.panasonic.com/support Compliance with TIA-1083 standard Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Installation Notice:

For assistance, please visit http://shop.panasonic.com/support 9 TCompatible withHearing Aid T-CoilTIA-1083LThis product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws.LCet appareil est conu pour tre utilis aux tats-Unis dAmrique. La vente ou lemploi de cet appareil dans certains autres pays peut constituer une infraction la lgislation locale.LEste producto est diseado para usarse en los Estados Unidos de Amrica. La venta o el empleo de este producto en ciertos pases puede constituir violacin de la legislacin local.LL Appendix Customer services 10 For assistance, please visit http://shop.panasonic.com/support Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informa!on, Opera!ng Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Limited Warranty (ONLY FOR U.S.A.) Appendix For assistance, please visit http://shop.panasonic.com/support 11 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix 12 For assistance, please visit http://shop.panasonic.com/support Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Panasonic Corporation of North America Consumer Affairs Department 8th FI. Two Riverfront Plaza Newark NJ 07102-5490As of January 2020 Appendix Panasonic Corporation 2021 For assistance, please visit http://shop.panasonic.com/support 13 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the base unitsOperating Instructions. IMPORTANT!If your product is not working properly. Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.Two Riverfront Plaza, Newark, NJ 07102-5490 Notes 14 Notes 15 Notes 16

MARKINGS EXHIBIT B Portable Unit:

FCC ID Label (Nameplate) The marking will be shown on the battery compartment of the portable unit.

Ben Botros, Project Manager Safety, Compliance and Quality Assurance Request for Confidentiality April 27, 2021 PCTP-21-F001 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern;

FCC ID:

Type Filing:

Model Numbers:

ACJ96NKX-TGDA66 Original Application for UPCS Cordless Telephone Handset KX-TGDA66, KX-TGDA63 Request For Permanent Confidentiality In accordance with provisions of Sections 0.457(d) and 0.459 of the Commissions Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain:

(1) Description of Electrical Circuitry;

(2) Schematic Diagrams of Base Unit and RF Unit; and

(3) Base Unit Block Diagram. Rationale: The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development Request For Short-Term Confidentiality In accordance with FCC Public DA 04-1705, we request 180 day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain:

(1) External Photographs of Base Unit and RF Unit;

(2) Internal Photographs of Base Unit and RF Unit;

(3) Test Setup Photographs; and

(4) User Manual. Rationale: These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Safety, Compliance and Quality Assurance Two Riverfront Plaza | Newark, NJ 07102-5490

1.9GHz Square 1.9GHz Square

<For Canada>

EQUIPMENT DESCRIPTION DESCRIPTION OF DIFFERENCES

(1.9GHz Cordless Telephone, KX-TGD8xx Series and KX-TGD6xx Series) Application to

<For US>

: FCC 15 TABLE 1 Model Type Base Unit Portable Unit Telephone Model No. Model No. Answering Indicator Bluetooth Module Declaration of FCC ID KX-TGD860 KX-TGD660 KX-TGD860 KX-TGDA86 KX-TGD660 KX-TGDA66 KX-TGD830 Appearance KX-TGD830 KX-TGDA83 Provided 7seg.Counter LEDs Provided ACJ96NKX-TGD860 KX-TGD630 KX-TGD630 None ACJ96NKX-TGD830 KX-TGD610 KX-TGD610 None None KX-TGDA63 Model Type Base Unit Model No. Portable Unit Telephone Model No. Answering Indicator Bluetooth Module Declaration of IC ID KX-TGD870C KX-TGD870 KX-TGDA87 Provided IC:216A-KXTGD870 KX-TGD850C Appearance KX-TGD850 KX-TGDA85 None IC:216A-KXTGD850 Provided 7seg.Counter LEDs NOTE: All models have the same P.C. Board PNLB2909, the same RF circuit and the software. NOTE: These model numbers may be followed by country code and color code. NOTE: The difference between KX-TGD870C and KX-TGD860 is model number only. US: KX-TGD860 Canada: KX-TGD870C NOTE: The difference between KX-TGD850C and KX-TGD830 is model number only. US: KX-TGD830 Canada: KX-TGD850C NOTE: The difference between KX-TGD660 / KX-TGD630/ KX-TGD610 and (previous model) KX-TGD860 / KX-TGD830 is model number only. NOTE: KX-TGD660 / KX-TGD630/ KX-TGD610 are using same ID with (previous model) KX-TGD860 / KX-TGD830 NOTE: The difference between KX-TGD630 and KX-TGD610 is Telephone answering system. KX-TGD630 : provided KX-TGD610 : none Both are identical in Telephone Line, RF circuit, Antenna, Power circuit & Safety structure.

:FCC ID: ACJ96NKX-TGD860 KX-TGD660 KX-TGD630/KX-TGD610 :FCC ID: ACJ96NKX-TGD830 So that, there are no effect to RF/EMC/Safety/Telecom

<For US>

Model KX-TGDA86 KX-TGDA83 KX-TGDA66 KX-TGDA63

<For Canada>

Model KX-TGDA87C KX-TGDA85C Table for Handset Lighted Keys Headset Jack LCD LCD backlight Type Declaration of FCC ID Provided None White Normal 1.6 inch monochrome 1.6 inch monochrome

*1 ACJ96NKX-TGDA51 New ACJ96NKX-TGDA66 Provided None White Normal NOTE: The difference between KX-TGDA86 and KX-TGDA83 is only silk screen print on cabinet. NOTE: The difference between KX-TGDA66 and KX-TGDA63 is only silk screen print on cabinet. NOTE: KX-TGDA86/KX-TGDA83 use P.C Board PNLB2668 while KX-TGDA66/KX-TGDA63 use P.C Board PNLB2936. NOTE: The difference between KX-TGDA86/KX-TGDA83 and KX-TGDA66/KX-TGDA63 is the type of BBIC, RF circuit and software. Lighted Keys Headset Jack LCD LCD backlight Type Declaration of IC ID Provided None 1.6 inch monochrome White Normal

*1 IC:216A-KXTGDA59 NOTE: The difference between KX-TGDA87C and KX-TGDA86 is model number only. US: KX-TGDA86 Canada: KX-TGDA87C NOTE: The difference between KX-TGDA85C and KX-TGDA83 is model number only. US: KX-TGDA83 Canada: KX-TGDA85C NOTE: The difference between KX-TGDA86 / KX-TGDA83 and (previous model)

*1 NOTE: KX-TGDA86 / KX-TGDA83 are using same ID with (previous model) KX-TGDA51 / KX-TGDA50 FCC ID : ACJ96NKX-TGDA51 NOTE: KX-TGDA87C / KX-TGDA85C are using same ID IC: 216A-KXTGDA59 with (previous model) KX-TGDA59C / KX-TGDA58C KX-TGDA51 / KX-TGDA50 is model number only.