Installation Manual Additional Bluetooth Cordless Handset Model No. KX-TGDA99 Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone:
KX-TGD890/KX-TG3890 KX-TGF890
(The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base units operating instructions for further details. Please read this installation manual before using the unit and save it for future reference. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Printed in Malaysia PNQX9209ZA PP0122YM0 KX-TGDA99_0110_ver001.pdf 1 10/1/2021 7:56:45 AM Installation Accessory information Supplied accessories Accessory item/Part number Charger/PNLC1077ZS Rechargeable batteries/HHR-4DPA Handset cover/PNYNTGDA99SR*1 Quantity 1 2 1
*1 The handset cover comes attached to the handset. Note:
R Please read the base units operating instructions for additional/replacement accessories. R Please read Graphical symbols for use on equipment and their descriptions of the base units operating instructions. Bluetooth devices You can expand your phone system by pairing the Bluetooth headset to the handset. Your Bluetooth headset*1: 4 max.
*1 Your headset must be Bluetooth wireless technology compatible. For more details and the list of compatible headset, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone Trademarks R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. 2 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 2 10/1/2021 7:56:45 AM Installation For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support Installation or any type of moisture. R To prevent the risk of fire or electrical shock, do not expose the product to rain R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not place the handset on the base unit when battery cover is removed. CAUTION Installation and location R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. R The product is only use for mounting at heights 2 m. Note:
R This height is not guaranteed for product reliability. R To prevent serious injuries due to the product unexpectedly falling, the product must be installed at a height of 1.5 m or lower. For assistance, please visit http://shop.panasonic.com/support 3 KX-TGDA99_0110_ver001.pdf 3 10/1/2021 7:56:45 AM Installation Battery R We recommend using the supplied batteries or additional/replacement batteries noted on page 2 for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. R Avoid the use in the following conditions:
High or low extreme temperatures during use, storage or transportation. Replacement of a battery with an incorrect type that can defeat a safeguard. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Extremely high temperature and/or extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Do not use the telephone to report a gas leak in the vicinity of the leak. 4 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 4 10/1/2021 7:56:45 AM 3. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS Installation Other information R The applied nameplate is located at the bottom or rear of the product. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Notice for product disposal, transfer, or return R This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Specifications R Standard:
Bluetooth wireless technology 4.2 Hands Free Profile (HFP) R Frequency range:
1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power:
115 mW (max.) R Power source:
120 V AC, 60 Hz R Power consumption:
Standby: 0.1 W Maximum: 1.8 W R Operating conditions:
0 C 40 C (32 F 104 F), 20 % 80 % relative air humidity (dry) For assistance, please visit http://shop.panasonic.com/support 5 KX-TGDA99_0110_ver001.pdf 5 10/1/2021 7:56:45 AM Installation Setting up Connections/Wall mounting Connect the AC adaptor to the power outlet. Drive the screws (
) (not supplied) into the wall, if necessary. 27.2 mm (1 1/16 inches) Note:
R The AC adaptor must remain connected at all times. (It is normal for the adaptor R Make sure that the wall and the fixing method are strong enough to support the to feel warm during use.) weight of the unit. Battery installation/Battery charging Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 2. R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (
Charge for about 7 hours. R Confirm Charging is displayed (
R When the batteries are fully charged, Fully charged is displayed.
, 6 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 6 10/1/2021 7:56:45 AM 12121212142312 Installation Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
) and the charge contacts with a dry cloth and
, clean the battery ends (
charge again. Removing the battery Registering a handset to a base unit 1 Base unit:
Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 2 Handset:
Place the handset on the base unit or charger, then wait until a long beep sounds and is displayed. Note:
R If an error tone sounds, or if the base units operating instructions. is displayed, register the handset according to Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN Using a Bluetooth headset By pairing a Bluetooth headset to the handset, you can enjoy hands-free conversations when talking over a phone calls. For details about the operations, refer to the base units operating instructions. Important:
R Your Bluetooth headset must support the Hands Free Profile (HFP) specification. R Up to 4 Bluetooth headsets can be paired to the handset. R Only 1 Bluetooth headset can be used with the unit at a time. For assistance, please visit http://shop.panasonic.com/support 7 KX-TGDA99_0110_ver001.pdf 7 10/1/2021 7:56:45 AM 12 Installation R For best performance, we recommend using your Bluetooth headset within 1 m
(3.3 feet) of the handset. The handset can communicate with Bluetooth headsets within an approximately 10 m (33 feet) range. Turning Bluetooth feature on/off Once this feature is turned on, the Bluetooth MPAIRN button is enable to use and the handset can perform other Bluetooth functions. The default setting is Off. Important:
R We recommend turning off the setting to save the battery life of your handset when you are not using a Bluetooth headset. 1 MMENUN#613 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN Pairing a Bluetooth headset to the handset Important:
R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. R Refer to the headsets operating instructions. If your headset PIN is not 0000, change the Bluetooth PIN beforehand (page 10). 1 Bluetooth headset:
Set your headset to pairing mode. 2 Handset:
Press and hold MPAIRN for about 3 seconds. 3 Wait until a long beep sounds. R When the Bluetooth headset is ready for use, M N is displayed.*1
*1 Corresponding headset number is indicated next to the item. Note:
R In step 2, if the handset has been paired with a maximum of 4 headsets, you can overwrite any unwanted headset by pressing MYESN a MbN: Select the desired headset a MSELECTN. Connecting/disconnecting a Bluetooth headset To use your headset with another Bluetooth device, you may need to disconnect it from the handset. If you want to use it again, reconnect the headset to the handset. Important:
R Make sure that the headset is turned on. 8 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 8 10/1/2021 7:56:45 AM Installation 1 To connect/disconnect:
Press MPAIRN a MbN: Select the desired headset a MSELECTN 2 MbN: Connect or Disconnect a MSELECTN R A long beep sounds. 3 MOFFN Note:
R A disconnected headset is not unpaired from the handset, so pairing it to the handset again is unnecessary. Unpairing a Bluetooth headset You can cancel the pairing of the headset that is stored to the handset. 1 Press MPAIRN a MbN: Select the desired headset. a MSELECTN 2 MbN: Unpair a MSELECTN 3 MbN: Yes a MSELECTN R A long beep sounds. 4 MOFFN Changing the headset name The name of the registered headset will be displayed while talking using a Bluetooth headset or in the headset list. You can customize the name of registered Bluetooth headsets. 1 Press MPAIRN a MbN: Select the desired headset. a MSELECTN 2 MbN: Change name a MSELECTN a Enter the desired name (16 characters max.). 3 MSAVEN a MOFFN Note:
R When the headset is unpaired, the headset name stored in the handset will be deleted. Connection after the call You can set to remain or disconnect the Bluetooth headset connection after the call has ended. The default setting is Stay connected. 1 MMENUN#644 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN For assistance, please visit http://shop.panasonic.com/support 9 KX-TGDA99_0110_ver001.pdf 9 10/1/2021 7:56:45 AM Installation Changing the Bluetooth PIN (Personal Identification Number) The PIN is used to pair the headset to the handset. The default PIN is 0000. If your headset PIN is not 0000, change the Bluetooth PIN beforehand. Important:
R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, please refer the base units operating instruction to reset the PIN. 1 MMENUN#645 R If the unit prompts you to enter the old PIN (When the default has been changed), enter the current 4-digit PIN. a MOKN 2 Enter the new 4-digit PIN. a MOKN 3 Enter the new 4-digit PIN again. a MSAVEN a MOFFN FCC and other information This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. 10 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 10 10/1/2021 7:56:45 AM Installation NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Warning:
R This product complies with FCC radiation exposure limits set forth for an R This handset may not be collocated or operated in conjunction with any other uncontrolled environment. antenna or transmitter. R For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements. Notice:
R FCC ID can be found inside the battery compartment or on the bottom of the unit. Compliance with TIA-1083 standard Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. For assistance, please visit http://shop.panasonic.com/support 11 KX-TGDA99_0110_ver001.pdf 11 10/1/2021 7:56:45 AM TCompatible withHearing Aid T-CoilTIA-1083 Installation Notice:
12 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 12 10/1/2021 7:56:45 AM LThis product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws.LCet appareil est conu pour tre utilis aux tats-Unis dAmrique. La vente ou lemploi de cet appareil dans certains autres pays peut constituer une infraction la lgislation locale.LEste producto est diseado para usarse en los Estados Unidos de Amrica. La venta o el empleo de este producto en ciertos pases puede constituir violacin de la legislacin local.LL Customer services Appendix For assistance, please visit http://shop.panasonic.com/support 13 KX-TGDA99_0110_ver001.pdf 13 10/1/2021 7:56:45 AM Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informa!on, Opera!ng Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Appendix Limited Warranty (ONLY FOR U.S.A.) 14 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 14 10/1/2021 7:56:45 AM Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix For assistance, please visit http://shop.panasonic.com/support 15 KX-TGDA99_0110_ver001.pdf 15 10/1/2021 7:56:45 AM Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Panasonic Corporation of North America Consumer Affairs Department 8th FI. Two Riverfront Plaza Newark NJ 07102-5490As of January 2020 Appendix Panasonic Corporation 2022 16 For assistance, please visit http://shop.panasonic.com/support KX-TGDA99_0110_ver001.pdf 16 10/1/2021 7:56:45 AM 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the base unitsOperating Instructions. IMPORTANT!If your product is not working properly. Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.Two Riverfront Plaza, Newark, NJ 07102-5490