all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Users manual | Users Manual | 2.28 MiB | December 09 2020 / June 07 2021 | delayed release | ||
1 2 3 |
|
Internal Photos | Internal Photos | 246.99 KiB | December 09 2020 / June 07 2021 | delayed release | ||
1 2 3 |
|
External Photos | External Photos | 182.15 KiB | December 09 2020 / June 07 2021 | delayed release | ||
1 2 3 |
|
Label and Label Location | ID Label/Location Info | 36.23 KiB | December 09 2020 | |||
1 2 3 | Block Diagram | Block Diagram | December 09 2020 | confidential | ||||
1 2 3 |
|
Cover Letters | Cover Letter(s) | 55.22 KiB | December 09 2020 | |||
1 2 3 | Operational Description | Operational Description | December 09 2020 | confidential | ||||
1 2 3 | Parts List | Parts List/Tune Up Info | December 09 2020 | confidential | ||||
1 2 3 |
|
RF Exposure info | RF Exposure Info | 129.09 KiB | December 09 2020 | |||
1 2 3 | Schematics | Schematics | December 09 2020 | confidential | ||||
1 2 3 |
|
Test Report | Test Report | 860.99 KiB | December 09 2020 | |||
1 2 3 |
|
Test Setup Photos | Test Setup Photos | 850.78 KiB | December 09 2020 / June 07 2021 | delayed release |
1 2 3 | Users manual | Users Manual | 2.28 MiB | December 09 2020 / June 07 2021 | delayed release |
Operating Instructions Model No. Link2Cell Cordless Telephone with Digital Answering Machine KX-TGD560 KX-TG3760 KX-TGD562 KX-TGD563 KX-TG743SK KX-TGD564 KX-TG744SK Model shown is KX-TGD560. Before initial use, see Getting Started on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 73. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support Caller ID Service Using Caller ID service ...............................43 Caller list ....................................................43 Using Bluetooth Devices Copying phonebook from a cellular phone
(phonebook transfer) ..................................45 Link to Cell app ..........................................46 Text message (SMS) alert .........................47 Alert settings for your DECT phone ...........47 Remote voice assist ...................................48 Using a Bluetooth headset (optional) .........48 Answering System for Landline Answering system for landline ...................51 Turning the answering system on/off .........51 Greeting message ......................................51 Listening to messages ...............................52 Remote operation .......................................53 Answering system settings .........................54 Useful Information Voicemail service for landline .....................56 Wall mounting ............................................57 Error messages ..........................................60 Troubleshooting .........................................61 FCC and other information .........................70 Gua Rpida Espaola Gua Rpida Espaola ...............................73 Appendix Customer services .....................................83 Limited Warranty (ONLY FOR U.S.A.) .......84 Index Index...........................................................86 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................6 Important Information For your safety .............................................7 Important safety instructions ........................8 For best performance ...................................8 Other information .........................................9 Specifications .............................................10 Getting Started Setting up ...................................................11 Controls ......................................................13 Display icons/Indicators .............................14 Language settings ......................................16 Date and time .............................................16 Recording your greeting message .............16 Other settings .............................................16 Link to Cell Link to cell feature ......................................17 Pairing a cellular phone ..............................17 Link to cell settings .....................................18 Making/Answering Calls Making cellular calls ...................................21 Making landline calls ..................................21 Answering calls ..........................................22 Useful features during a call .......................22 Intercom .....................................................25 Call Block Call block ....................................................26 Storing unwanted callers ............................26 Phonebook Phonebook .................................................28 Speed dial ..................................................30 Programming Menu list .....................................................32 Alarm ..........................................................40 Silent mode ................................................40 Other programming ....................................41 Registering a unit .......................................41 2 Introduction Model composition Series Model No. Base unit Part No. Handset Part No. Quantity KX-TGD560 series KX-TGD560 KX-TGD560 KX-TGDA51 KX-TG3760 KX-TGD560 KX-TGDA51 KX-TGD562 KX-TGD560 KX-TGDA51 KX-TGD563 KX-TGD560 KX-TGDA51 KX-TG743SK KX-TGD560 KX-TGDA51 KX-TGD564 KX-TGD560 KX-TGDA51 KX-TG744SK KX-TGD560 KX-TGDA51 Accessory information Supplied accessories No. Accessory item/
Part number A AC adaptor/PNLV226-0X B Telephone line cord*1 C Wall mounting adaptor*2 D Rechargeable batteries*3 E Handset cover*4, *5 F Charger*6 1 1 1 2 1 1 1 1 4 2 1 1 1 1 6 3 2 Quantity KX-TGD560 KX-TG3760 KX-TGD562 KX-TGD563 KX-TG743SK KX-TGD564 KX-TG744SK
*1 PNJA1186Z (Black cord), PNJA1193Z (Transparent cord)
*2 PNKL1044Y2 (Black), PNKL1044Y1 (White)
*3 See page 4 for replacement battery information.
*4 The handset cover comes attached to the handset.
*5 PNYNTGDA50BR (Black), PNYNTGDA50WR (White)
*6 PNLC1077ZB (Black), PNLC1077ZW (White) A B C D E 1 1 2 3 3 4 4 1 1 1 8 4 3 For assistance, please visit http://shop.panasonic.com/support 3 Introduction F Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 83). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type:
Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset Range extender KX-TGA405*2 Key detector KX-TGA20*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:
http://www.panasonic.com/tga20 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system Handset (optional): KX-TGDA50/KX-TGDA51 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. R Optional handsets (KX-TGDA50) have a different key print from that of the supplied handsets. R To order, please visit http://
shop.panasonic.com/support 4 For assistance, please visit http://shop.panasonic.com/support Bluetooth devices You can expand your phone system by pairing the following units to a single base unit. Introduction Your Bluetooth cellular phone*1: 2 max.
(for cellular calls: page 17) Your Bluetooth headset*1: 1 max.
(for a wireless hands-free conversation: page 48)
*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone Trademarks R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license. R iPhone is a registered trademark of Apple Inc. R Android is a trademark of Google Inc. R Gmail and Google Calendar are trademarks of Google Inc. R Facebook is trademark of Facebook, Inc. R Twitter is trademark of Twitter Inc. R Instagram is trademark of Instagram, Inc. R BlackBerry is owned by Research In Motion Limited and is registered in the United States and may be pending or registered in other countries. Panasonic is not endorsed, sponsored, affiliated with or otherwise authorized by Research In Motion Limited. R Siri is a registered trademark of Apple Inc. R Google Now is a trademark of Google Inc. R S Voice is a trademark of Samsung Electronics Co., Ltd. R All other trademarks identified herein are the property of their respective owners. For assistance, please visit http://shop.panasonic.com/support 5 Introduction Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment
(equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) ON (power) Direct current (D.C.) Protective earth OFF (power) Protective bonding earth Stand-by (power) Functional earth For indoor use only ON/OFF (power;
push-push) Caution, risk of electric shock 6 For assistance, please visit http://shop.panasonic.com/support For your safety To prevent severe injury and loss of life/
property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. For assistance, please visit http://shop.panasonic.com/support 7 Important Information R This product is unable to make calls when:
the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:
at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. 8 For assistance, please visit http://shop.panasonic.com/support Important Information Notice for product disposal, transfer, or return R This product can store your private/
confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heating devices, cooking appliances, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For assistance, please visit http://shop.panasonic.com/support 9 Important Information Specifications R Standard:
DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range:
1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power:
115 mW (max.) R Power source:
120 V AC, 60 Hz R Power consumption:
Base unit:
Standby: Approx. 1.2 W Maximum: Approx. 4.5 W Charger:
Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:
0 C 40 C (32 F 104 F), 20 % 80 %
relative air humidity (dry) 10 For assistance, please visit http://shop.panasonic.com/support Getting Started n Charger Connect the AC adaptor to the power outlet. Battery installation R USE ONLY rechargeable Ni-MH batteries
). AAA (R03) size (
R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (
). Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 19). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note:
R Use only the supplied Panasonic AC adaptor PNLV226. For assistance, please visit http://shop.panasonic.com/support 11 R Follow the directions on the display to set up the unit. 132431114231 Getting Started Removing the battery Battery charging Charge for about 7 hours. R Confirm Charging is displayed (
R When the batteries are fully charged, Fully charged is displayed.
). Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected. Power failure R The unit cannot be used to make or receive calls during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 8. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. 12 For assistance, please visit http://shop.panasonic.com/support 1211 Getting Started Controls Handset Icon Battery level Empty Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 10 hours max.*1 Not in use (standby) 5 days max.*1
*1 If eco mode is on. Note:
R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. However, during a cellular call, is not displayed even though this feature is activated. R Eco mode is turned off when the clarity booster is activated (page 23). N (TALK) Speaker M Dial keypad
*: Temporary tone dialing
) Ringer off 0: (
MZN (SP-PHONE: Speakerphone) MCALL BLOCKN Microphone Receiver Display MOFFN (
) For assistance, please visit http://shop.panasonic.com/support 13 ABAACBHIJGKDEF MANSWER ON/OFFN MCELL 1N (For pairing) M MLOCATORN R You can locate a misplaced handset N (Repeat) by pressing MLOCATORN. Display icons/Indicators Handset display items Item Meaning Getting Started N (Assist) MFLASHN M R You can use the handset to operate the voice recognition feature of your cellular phone by pressing M
(page 48). Charge contacts N n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Base unit Within base unit range Out of base unit range The landline is in use. R When flashing:
The call is on hold. R When flashing rapidly: An incoming call is now being received. A cellular line is in use.*1 R When flashing:
The cellular call is on hold. R When flashing rapidly:
A cellular call is being received. The remote voice assist feature is in use. Eco mode is on.*2 (page 13) A cellular phone is connected.*1 Ready to make/
receive cellular calls. R When turned off:
A cellular phone is not connected to the base unit. (page 19) A cellular call is in progress on that line. The cellular line is selected for the setting. Speakerphone is on.
(page 21) Ringer volume is off.*3
(page 22, 34, 36) Z Charge contacts Speaker Message counter CELL 1 indicator CELL 2 indicator HEADSET indicator MjN/MkN (VOL.: Volume up/down) MERASEN MCELL 2N (For pairing) N (Skip) M M N (PLAY/STOP) Message indicator (
) 14 For assistance, please visit http://shop.panasonic.com/support BCDEFAGHIJKL Item Meaning Status Meaning Silent mode is on. (page 40) On Call sharing mode is off.
(page 38) Alarm is on. (page 40) Handset number Battery level Blocked call (page 26) Clarity booster is on.*2
(page 23) Answering system is being used by another unit. Someone is using the corresponding line. In use Cell1 in use Cell2 in use C1&C2 in use Line in use Getting Started A cellular phone is connected. Ready to make/receive cellular calls. The cellular line is in use. Phonebook entries are being copied from a cellular phone (page 45). The base unit is searching for the paired cellular phone. The base unit is pairing a cellular phone. A cellular call is on hold. The remote voice assist feature is in use
(page 48). A cellular call is being received. A cellular phone is not paired to the base unit. A cellular phone is not connected to the base unit
(page 19). Flashing Flashing rapidly Light off
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
*2 During a cellular call, the item is not displayed even though the feature is activated.
*3 Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If all lines are turned off, no line is indicated. Base unit display item Item Meaning Greeting only is selected. Caller messages are not recorded. (page 55) Bluetooth HEADSET indicator on the base unit The HEADSET indicator shows the Bluetooth headset status. Status Meaning On A Bluetooth headset is connected to the base unit. Ready to use it. Flashing A Bluetooth headset is in use. The base unit is searching for the paired Bluetooth headset. The base unit is pairing a headset. CELL indicators on the base unit The CELL indicators show each cellular line status. Flashing rapidly A landline call is being received. For assistance, please visit http://shop.panasonic.com/support 15 Note:
R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 51 for details. 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN Getting Started Status Light off Meaning A Bluetooth headset is not paired to the base unit. The Bluetooth headset is not connected to the base unit. Language settings Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN Voice announcement language You can select the language used for the following features. Answering system guidance Talking Caller ID Application (App) alert announcement Text message (SMS) alert announcement 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2017 07 12 17 3 MOKN 4 Enter the current hour and minute
(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN 16 For assistance, please visit http://shop.panasonic.com/support Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to:
use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. talk on cellular calls even if your cellular phone is in your pocket or bag. enjoy cordless cellular calls even if your cellular phone plugged in and charging. Important:
R Your cellular phone must support the Hands Free Profile (HFP) specification. R You may pair 2 cellular phones and 1 Bluetooth headset. R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the Bluetooth headset and 1 cellular line*1). R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
*1 You cannot use a Bluetooth headset to talk on a cellular line. Pairing a cellular phone Important:
R For more details and the list of compatible cellular phones, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone. Link to Cell 1 Base unit:
Press and hold MCELL 1N or MCELL 2N for about 5 seconds. R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 0000). R If your cellular phone prompts you to confirm the passkey, tap MOKN or otherwise to accept the pairing request. 3 Base unit:
Wait until a long beep sounds. R It may take more than 10 seconds to complete pairing. R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. Note:
R If the cellular phone has already paired to the base unit, it is overwritten. R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions. R Make sure you cancel your cellular phones current pairing if you want to pair it to the other line (page 17). R The default setting for the alert feature is On, so when you pair your cellular phone to the base unit, this feature may be activated (page 47). (This depends on the version and type of cellular phone you are using.) Unpairing a cellular phone You can cancel the pairing of a cellular phone that is stored in the base unit. For assistance, please visit http://shop.panasonic.com/support 17 Link to Cell 1 For CELL 1: MMENUN#6111 For CELL 2: MMENUN#6112 2 MbN: Yes a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When All is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or All. a MSAVEN a MOFFN Note:
R When you select a specific handset to receive calls for a cellular line other handsets cannot answer the calls. R When you change to All from another setting, the base unit ringer volume also returns to the lowest level even if the ringer volume was changed. R The units selected with this setting have the alert feature (page 47) applied to them. Ring as cell mode Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone. The following settings are available:
Off: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 36). On (with Talking CID) (default):
The handset and base unit use your cellular phones ringer tone. Caller information is announced even if the Talking Caller ID is turned off. On (without Talking CID): The handset and base unit use your cellular phones ringer tone. Caller information is not announced even if the Talking Caller ID is turned on. Important:
R To use this feature, your cellular phone must support Bluetooth in-band ringtone. Refer to your cellular phones operating instructions. 1 For CELL 1: MMENUN#6141 For CELL 2: MMENUN#6142 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:
R The units use the preset ringer tones instead of your cellular phones ringer tone when a cellular call is being received if:
your cellular phone is in silent mode
(depending on your cellular phone). the base unit is in use. 2 handsets are sharing a landline call. R If your cellular phone is in silent mode with On (with Talking CID) set, the unit announces caller information even when Talking Caller ID is turned off (page 36). To use the handset ringer tone instead of your cellular phones ringer tone Select Off in step 2, Ring as cell mode, page 18. To change the handset ringer tone for a cellular line, see page 34. Auto connection to the Bluetooth devices (cellular phones) After pairing, your Bluetooth devices are connected to the base unit. If you move the Bluetooth devices out of base unit range, the Bluetooth devices are disconnected from the base unit. This feature allows the base unit to try to reconnect the Bluetooth devices at regular intervals when it returns within base unit range. You can set the interval. The default setting is 1 min. 18 For assistance, please visit http://shop.panasonic.com/support Important:
R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on. R Some cellular phones lose connection after usage, please check the specifications of your cellular phone for more details. 1 MMENUN#632 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:
R Some cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select Off in step 2. Check the specifications of your cellular phone. Connecting/disconnecting the cellular phone manually If you will not be using the paired cellular phones link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit. Note:
R After you disconnect a paired cellular phone from the base unit manually, it will automatically be connected to the base unit in 30 minutes. If you do not use the link to cell feature anymore, unpair the cellular phone (page 18). R A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary. 1 To connect/disconnect:
For CELL 1: MMENUN#6251 For CELL 2: MMENUN#6252 R A long beep sounds. 2 MOFFN Link to Cell Cellular line only mode (If you do not use the landline) If you do not use the landline, we recommend setting the unit to the cellular line only mode. The default setting is Off. Important:
R If you turn on the Cell line only mode, disconnect the telephone line cord from the base unit. Otherwise the Cell line only mode cannot be activated. 1 MMENUN#157 2 To turn on:
MbN: On a MSELECTN a MbN: Yes a MSELECTN To turn off:
MbN: Off a MSELECTN Note:
R Once you set this mode, you can press M N or MZN instead of MCELLN
(page 21) to make cellular calls for the handset. R Once you set this mode, the following features cannot be used:
Landline features (page 38) Answering system (page 51) Messages cannot be received. Voicemail features (page 56) R After this mode is turned on or off, the base unit reboots. Bluetooth connections from cellular phones or Bluetooth headset are disconnected. If the auto connection is turned on (page 18), the cellular phones are reconnected. will be displayed on the handset momentarily. The handset can be used once is displayed. When you use the landline again Before connecting the telephone line to the base unit, select Off in step 2, Cellular line only mode (If you do not use the landline), page 19. For assistance, please visit http://shop.panasonic.com/support 19 1 MMENUN#619 R If the unit prompts you to enter the old PIN (when the default has been changed), enter the current 4-digit PIN. 2 Enter the new 4-digit PIN. a MOKN 3 Enter the new 4-digit PIN again. a MSAVEN a MOFFN Link to Cell Cellular line selection This feature determines which cellular line is selected to make cellular calls when:
you press MCELLN on the handset. you press M N or MZN on the handset while the cellular line only mode is turned on. The following settings are available:
Manual (default): You can select the desired cellular line when making a call. Cellphone 1*1: CELL 1 is selected. Cellphone 2*1: CELL 2 is selected. 1 MMENUN#634 2 MbN: Select the desired setting. a MSAVEN a MOFFN
*1 After the Bluetooth device is paired, the device name is displayed. Storing your area code (for dialing only a 7-digit phone number to make a local call) You need to add your area code when making cellular calls to a phone number in your area. Once you store your area code, it is automatically added to the beginning of the 7-digit phone number when making cellular calls. 1 MMENUN#633 2 Enter the 3-digit area code. R To correct a digit, press MCLEARN. 3 MSAVEN a MOFFN Changing the Bluetooth PIN
(Personal Identification Number) The PIN is used to pair cellular phones to the base unit. The default PIN is 0000. To prevent unauthorized access to this product, we recommend that you change the PIN, and keep it confidential. Important:
R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, see page 68. 20 For assistance, please visit http://shop.panasonic.com/support Making cellular calls Important:
R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R Before making calls, confirm that the on the handset is corresponding displayed (page 14).
*1 You cannot use a Bluetooth headset to talk on a cellular line. 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). Go to step 4. 3 MbN: Select the desired cellular phone. a MSELECTN 4 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:
R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/
M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Adjusting the receiver or speaker volume Press MDN or MCN repeatedly while talking. Note:
R The receiver or speaker volume you set is kept for each line (landline and cellular lines). Making/Answering Calls Making a cellular call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 4 MbN: Select the desired cellular phone. a MSELECTN Erasing a number in the redial list n When a cellular phone is paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a MMENUN 3 MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN n When a cellular phone is not paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a MERASEN 3 MbN: Yes a MSELECTN a MOFFN Making landline calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M N to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:
R To switch to the speaker, press MZN. For assistance, please visit http://shop.panasonic.com/support 21 Making/Answering Calls To switch back to the receiver, press MZN/
M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 M N Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 30). Example: If you need to dial the line access number 9 when making outside calls with a PBX:
1 9 a MDN (Pause) 2 Dial the phone number. a M Note:
R A 3.5 second pause is inserted each time N MDN (Pause) is pressed. Answering calls 1 Lift the handset and then press M N or MZN when the unit rings. R To answer a cellular call, you can also press MCELLN. 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 37). Temporary handset ringer off: You can turn N (left the ringer off temporarily by pressing M soft key). Adjusting the ringer volume Press MDN or MCN repeatedly to select the desired volume while ringing. R To turn the ringer off, press MCN repeatedly. Handset Base unit n While the base unit is ringing for an incoming call:
Press MjN or MkN repeatedly to select the desired volume. n While the base unit is in standby mode:
Press MjN or MkN repeatedly to select the desired volume for landline call. R To turn the ringer off, press and hold MkN until the unit beeps. Note for handset and base unit:
R You can adjust the ringer volume for cellular call and landline call by programming (page 34, 36). R The ringer volume you set is kept for each line (landline and cellular lines). One-touch ringer off for the handset
) until the unit beeps to Press and hold 0 (
turn the ringer off. While the ringer is turned off, the handset will not ring for cellular calls or for landline calls. R You can turn the ringer on again by pressing and holding 0 (
beeps.
) until the unit Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold on the cellular line:
Press MCELLN.*1 R Another handset user can take the call by pressing MCELLN.*1
*1 If you press MCELLN and the selection list is displayed, select 22 For assistance, please visit http://shop.panasonic.com/support the desired cellular line and press MSELECTN. To release hold on the landline:
Press M R Another handset user can take the call N. by pressing M N. Note:
R After holding for 10 minutes, the call is disconnected. Mute 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Note:
R MMUTEN is a soft key visible on the display during a call. Flash for landline calls MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:
R To change the flash time, see page 38. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit that is in use after you hear the call waiting tone. 1 Press MFLASHN to answer the 2nd call. 2 To switch between calls, press MFLASHN. Making/Answering Calls Note:
R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing for landline calls (for rotary/pulse service users) Press * before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed. However, during a cellular call, is not displayed even though the feature is activated. Call share You can join an existing outside call. n While another unit is on a cellular call:
1 To join the conversation, press MCELLN. R You can join the conversation in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 2 MbN: Select the corresponding cellular phone. a MSELECTN n While another unit is on a landline call:
To join the conversation, press M N. Note:
R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 38). For assistance, please visit http://shop.panasonic.com/support 23 Making/Answering Calls Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between handsets. 1 During an outside call, press MMENUN. 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer:
Press MOFFN. To establish a conference call:
MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold:
MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Transferring a cellular call between the handset and a cellular phone Transferring a cellular call from the handset to a cellular phone 1 Press MMENUN during a cellular call. 2 MbN: Transfer to cell a MSELECTN R The cellular call is transferred to the cellular phone. Note:
R Depending on your cellular phone type, you may need to set the cellular phone to be ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. Transferring a cellular call from a cellular phone to the handset During a conversation using a cellular phone, the call cannot be transferred to the handset by the cellular phone. Perform the following with the handset. 1 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 2 MbN: Select the corresponding cellular phone. a MSELECTN R The call is transferred to the handset. Answering a 2nd call If you receive a call while talking on the phone, the interrupt tone sounds (page 36) and the 2nd callers information is displayed if you subscribe to Caller ID service (page 43). Answering a 2nd call during a landline call 1 Press MMENUN during a landline call. 2 MbN: Hold a MSELECTN 3 To answer the 2nd call:
Press MCELLN while the 2nd call is being received. 4 To hang up the 2nd call and return to the 1st call (landline call), press MOFFN, then press M N. Answering a 2nd call during a cellular call 1 Press MMENUN during a cellular call. 2 MbN: Hold a MSELECTN 24 For assistance, please visit http://shop.panasonic.com/support Making/Answering Calls 3 To answer the 2nd call:
Press M is being received. N or MCELLN while the 2nd call 4 To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN.*1
*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. Intercom Intercom calls can be made between handsets. Note:
R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds
(page 36). To finish intercom, press MOFFN. To answer the call, press M N or MCELLN. Making an intercom call 1 MMENUN a MbN: Intercom a MSELECTN 2 MbN: Select the desired unit. a MSELECTN 3 When you finish talking, press MOFFN. Note:
R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. Answering an intercom call 1 Press M 2 When you finish talking, press MOFFN. N to answer the page. For assistance, please visit http://shop.panasonic.com/support 25 Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list:
when an incoming call is being received when an incoming call is being recorded by the answering system when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the situations shown above. 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, Caller blocked is displayed, and then the call is disconnected. Note:
R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available:
for intercom calls or calls received by call waiting. when a landline call (or cellular call) is being received during a cellular call (or landline call). R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). Block a single number: The unit blocks calls from specific phone numbers stored in the call block list. Block range of numbers: The unit blocks calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. Block unknown CID: The unit blocks calls that have no phone number. Single phone numbers and ranges of numbers can be stored in the call block list up to 150 items in total. Blocking unwanted callers:
When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.
*1 If you do not want this one ring to sound, select No in Turning the first ring on/
off (page 27). Storing a single phone number Important:
R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list n When a cellular phone is paired:
1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number:
MSELECTN a Press * (Edit) repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN n When a cellular phone is not paired:
1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number: MMENUN a MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN:
26 For assistance, please visit http://shop.panasonic.com/support Call Block No: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers. 1 MCALL BLOCKN 2 MbN: One ring for blocked call a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Viewing/editing/erasing call block numbers 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. R After viewing, press MOFFN to exit. 4 To edit a number:
MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:
MERASEN a MbN: Yes a MSELECTN a MOFFN Note:
R When editing, press the desired dial key to add digits and press MCLEARN to erase digits. Erasing all call block numbers 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a MSELECTN 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN Adding call blocked numbers manually 1 MCALL BLOCKN 2 MbN: Block a single number a MSELECTN 3 MMENUN a MbN: Add a MSELECTN 4 Enter the phone number (24 digits max.). a MSAVEN a MOFFN Storing a range of number 1 MCALL BLOCKN 2 MbN: Block range of numbers a MSELECTN 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). a MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 MCALL BLOCKN 2 MbN: Block unknown CID a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Turning the first ring on/off You can choose whether the first ring sounds when a call is received. Yes (default): The first ring for all calls will be heard, including calls from blocked phone numbers. For assistance, please visit http://shop.panasonic.com/support 27 Adding phonebook entries MMENUN Phonebook Phonebook You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 29). The following groups are available:
Group 1: Home*1 (default) Group 2: Cell 1*1 Group 3: Cell 2*1 Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed. Important:
R All entries can be shared by any registered handset. R You can copy phonebook entries from a Bluetooth cellular phone to the units phonebook (page 45). 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note:
R In step 3, you can switch the language for entering characters.
# a MbN: Select the desired language. a MOKN Entering characters Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. The following operations are also available. Operation Switch between the uppercase and lowercase
(A a) Key
28 Key Operation MFN MEN Move the cursor MCLEARN Erase the character or number R To erase all, press and hold it. R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 2 seconds after entering a character, the character is fixed and the cursor moves to the next space. Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. n When a cellular phone is paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Save a MSELECTN 4 To store the name, continue from step 3, Editing entries, page 30. n When a cellular phone is not paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a MSAVEN 3 To store the name, continue from step 3, Editing entries, page 30. Note:
R The name stored in the phonebook will be reflected in the redial list after you make a call using that phonebook entry. Storing caller information to the phonebook n When a cellular phone is paired:
1 MCN CID 2 MbN: Select the desired entry. a MSELECTN R To edit the number, press * (Edit) repeatedly until the phone number is shown in the desired format. For assistance, please visit http://shop.panasonic.com/support 3 MSAVEN 4 MbN: Phonebook a MSELECTN 5 Continue from step 3, Editing entries, page 30. 5 To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN 6 MOFFN Phonebook n When a cellular phone is not paired:
1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number:
MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN:
Phonebook a MSELECTN a Go to step 4. 3 MbN: Save phonebook a 4 Continue from step 3, Editing entries, MSELECTN page 30. Groups Groups can help you find entries in the phonebook quickly and easily. You can change the group name for groups 4-9
(Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Changing group names/setting ringer ID 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a MSELECTN R If you selected Home, Cell 1, or Cell 2, go to step 5. 4 To change group names MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN Finding and calling from a phonebook entry 1 MFN W 2 To scroll through all entries MbN: Select the desired entry. To search by first character Press the dial key (0 to 9, or #) which contains the character you are searching for. MbN: Scroll through the phonebook if necessary. To search by group MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary. To search by query You can narrow down the search to enter the first characters of a name.
To search for the name, enter the first characters (up to 4) in uppercase (page 28). a MOKN MbN: Scroll through the phonebook if necessary. 3 n Using a cellular line:
MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). MbN: Select the desired cellular phone. a MSELECTN n Using a landline:
M N For assistance, please visit http://shop.panasonic.com/support 29 Phonebook Editing entries 1 Find the desired entry (page 29). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN 5 MbN: Select the desired group (page 29). a MSELECTN 2 times a MOFFN Erasing entries Erasing an entry 1 Find the desired entry (page 29). 2 MMENUN a MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Erasing all entries 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 3 MbN: Select the desired group. a MSELECTN 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MFN W. 2 MbN: Select the desired entry. 3 Press MCALLN to dial the number. Note:
R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 22). R If you have rotary/pulse service, you need to press * before pressing MFN W in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * to the beginning of phone numbers you wish to chain dial (page 28). Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers:
1 Press and hold the desired speed dial key (1 to 9). a MADDN 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters max.). a MOKN 4 Enter the partys phone number (24 digits max.). a MOKN a MSELECTN a MOFFN n From the phonebook:
1 Press and hold the desired speed dial key (1 to 9). a MADDN 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:
R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. Editing an entry 1 Press and hold the desired speed dial key
(1 to 9). a MMENUN 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN a MSELECTN a MOFFN 30 For assistance, please visit http://shop.panasonic.com/support Phonebook Erasing an entry 1 Press and hold the desired speed dial key
(1 to 9). a MMENUN 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Viewing an entry/Making a call n Using a cellular line:
1 Press and hold the desired speed dial key (1 to 9). 2 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 3 MbN: Select the desired cellular phone. a MSELECTN n Using a landline:
1 Press and hold the desired speed dial key (1 to 9). 2 To make a call, press M N. For assistance, please visit http://shop.panasonic.com/support 31 Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 Press MCN or MDN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note:
R To exit the operation, press MOFFN. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table Main menu: W Phonebook Operation Viewing the phonebook entry. Main menu:
Caller list Operation Viewing the caller list. Main menu:
Answering device Sub-menu 1 Sub-menu 2 Settings Play new message Play all message Erase all message*1 Greeting Record greeting*1 Check greeting Pre-recorded*1
(Reset to pre-recorded greeting) Code
#280 Code
#213 Code
#323
#324
#325
#302
#303
#304 29 43 52 52 53 51 52 52 32 For assistance, please visit http://shop.panasonic.com/support Recording time*1
#305 55 Sub-menu 1 Settings Sub-menu 2 Ring count*1 Remote code*1 Screen call Answer on*1 Answer off*1 Main menu:
Voicemail access*3 Operation Listening to voicemail messages. Main menu:
Intercom Operation Paging the desired unit. Settings Toll saver 2-7 rings
<4 rings>
<3 min>
1 min Greeting only*2
<111>
<On>
Off Programming Code
#211
#306
#310
#327
#328 Code
#330 Code
#274 54 53 54 51 51 56 25 For assistance, please visit http://shop.panasonic.com/support 33 Programming Main menu:
Bluetooth Sub-menu 1 Sub-menu 2 Settings Link to cell 1:Add new device*4
(for CELL 1) 2:Add new device*4
(for CELL 2) Connect*1/
Disconnect*1 Ringer volume Handset Ringer volume Base unit*1 Ringer tone*7 Off6 <6>
Off6 <1>
<Tone 2>*5
<Tone 4>*6 Select unit to ring*1
<All>
Handset 1-6 Ring as cell
(limited)*1
<On (with Talking CID)>
On (without Talking CID) Off Alert settings*1 Alert On/Off Alert settings*1 Voice alert
<On>
Off
<On>
Off Alert settings*8 Alert tone
<Tone 1>*5
<Tone 2>*6 Pair Unpair Add new device*4 Connect*1/
Disconnect*1 Pair Unpair Code
#6251*5
#6252*6
#6281*5
#6282*6
#G6281*5
#G6282*6
#6291*5
#6292*6
#6271*5
#6272*6
#6141*5
#6142*6
#6101*5
#6102*6
#6031*5
#6032*6
#6041*5
#6042*6
#6241*5
#6242*6
#6111*5
#6112*6
#618
#621
#622
#621
#612 19 22 18 18 47 47 47 17 17 45 49 49 49 49 Phonebook transfer Headset 34 For assistance, please visit http://shop.panasonic.com/support Programming Code
#632
#633
#157
#634
#619
#117
#118
#119 Code
#101
#720 18 20 19 20 20 45 16 40 Sub-menu 1 Settings Sub-menu 2 Auto connect*1 Settings Off
<1 min>
3 min 5 min 10 min Cell area code*1 Cell line only mode*1 On
<Off>
Cell line select
<Manual>
Cellphone 1*4 Cellphone 2*4 Set PIN*1
<0000>
International code*1 Country code*1 Trunk prefix*1 Main menu:
Set date & time Sub-menu 1 Sub-menu 2 Settings Date and time*1 Memo alarm Alarm13
<Off>
Once Daily Weekly Time adjustment*1, *9 Main menu:
Speed dial Operation Viewing the speed dial entry.
<Caller ID auto>
Manual
#226 Code
#261 30 For assistance, please visit http://shop.panasonic.com/support 35 Programming Main menu:
Settings Sub-menu 1 Sub-menu 2 Ring adjustments Settings Off6 <6>
Off6 <1>
#G160 Ringer volume Handset*3 Ringer volume Base unit*1, *3 Ringer tone*3, *7, *10
(Handset) Interrupt tone*11 Silent mode
#237 41
#241 41 Code
#160
#161
#201
#238
#101
#720
#226
#162
#G162 24 40 16 40 43
<Tone 1>
<On>
Off On/Off On
<Off>
Start/End
<11:00 PM/
06:00 AM>
Select group Home Cell 1 Cell 2 Group 4-9
<Off>
Once Daily Weekly
<On>
Off On
<Off>
Set date & time Date and time*1 Memo alarm Alarm13 Time adjustment*1, *9
<Caller ID auto>
Manual Talking caller ID Handset Base unit*1 36 For assistance, please visit http://shop.panasonic.com/support Sub-menu 1 Sub-menu 2 Settings Change name*1 Detector1 Detector2*14 Detector3*14 Detector4*14 Key detector setting*12 1:Add new device
(for Detector1)*13 2:Add new device
(for Detector2) 3:Add new device
(for Detector3) 4:Add new device
(for Detector4) Registration
#6571 Deregistration
#6581
<On>
Off Level 14 <2>
On
<Off>
<On>
Off
<On>
Off On
<Off>
Block unknown CID
(CID: Caller ID) Block
<Unblock>
One ring for blocked call
<Yes>
No Save VM access#*1
(VM: Voicemail) VM tone detect*1 Call block*1 Block a single number Block range of numbers Speed dial Record greeting*1 Voicemail*3 LCD contrast
(Display contrast) Handset name Display name Key tone Caller ID edit
(Caller ID number auto edit) Auto talk*15 Programming Code
#6561
#6562*14
#6563*14
#6564*14
#6572*14
#6573*14
#6574*14
#6582*14
#6583*14
#6584*14
#217
#240
#173
#261
#302
#331
#332
#145
#104
#105
#165
#214 26 27 27 27 30 51 56 56 41 41 44
#200 22 For assistance, please visit http://shop.panasonic.com/support 37 Programming Sub-menu 1 Sub-menu 2 Set tel line*3 Set dial mode*1 Set flash time*1, *16 Call sharing*1 Set line mode*1, *17 Registration Register handset Deregistration*2 Change language Display Announcement*1 Main menu:
Customer support Operation Displaying customer support Web address. Main menu:
Key detector*12 Settings
<Tone>
Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms
<700 ms>
900 ms A <B>
<On>
Off
<English>
Espaol
<English>
Espaol Code
#120
#121
#122
#194
#130
#131
#110
#112 Code
#680 Code
#655 16 23 23 41 41 16 16 Sub-menu 1 Sub-menu 2 Settings Search Battery check
*1 If you program these settings using one of the units, you do not need to program the same
*2 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 19).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 The preset melodies in this product (Tone 3 - Melody 10) are used with permission of 2004 - 2013 Copyrights Vision Inc. 38 For assistance, please visit http://shop.panasonic.com/support Programming
*8 The preset melodies in this product (Tone 1 and Tone 2) are used with permission of 2013 Copyrights Vision Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 16).
*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or 2). If you select a melody, you cannot distinguish lines by their ringers.
*11 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select On, the tone sounds 2 times.
*12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector.
*13 For models with supplied key detectors, the display shows 1: Detector1.
*14 If you register 2 or more key detectors.
*15 If you subscribe to a Caller ID service and want to view the callers information after lifting up the handset to answer a call, turn off this feature.
*16 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.
*17 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. For assistance, please visit http://shop.panasonic.com/support 39 Programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:
R Make sure the units date and time setting is correct (page 16). 1 MMENUN#720 2 MbN: Select the desired alarm. a 3 MbN: Select the desired alarm option. a MSELECTN MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. Enter the desired month and date. a MOKN n Once:
n Weekly:
MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN 7 Enter a text memo (10 characters max.). a MOKN 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. 9 MbN: Select the desired snooze setting. a MSAVEN 10 MSELECTN a MOFFN Note:
R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature
(page 29), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important:
R Make sure the units date and time setting is correct (page 16). R We recommend turning the base unit ringer off (page 34, 36) in addition to turning the silent mode on. R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMENUN#238 40 For assistance, please visit http://shop.panasonic.com/support Programming 2 MbN: Select the desired setting. a MSAVEN R If you select Off, press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. 1 MMENUN#105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Registering a unit Changing the start and end time Operating additional units 1 MMENUN#237 2 Continue from step 3, Turning silent mode on/off, page 40. Selecting groups to bypass silent mode 1 MMENUN#241 2 MbN: Select the desired groups. a MSELECTN R group numbers. is displayed next to the selected R To cancel the selected group:
MbN: Select the group. a Press MSELECTN again. disappears. 3 MSAVEN a MOFFN Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 41). 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Additional handsets Up to 6 handsets can be registered to the base unit. Important:
R See page 4 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:
MMENUN#130 2 Base unit:
Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 3 Handset:
Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. For assistance, please visit http://shop.panasonic.com/support 41 Programming 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to cancel. a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN 42 For assistance, please visit http://shop.panasonic.com/support Using Caller ID service Important:
R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:
Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Missed calls If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:
R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:
A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Caller ID Service Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:
subscribe to a Caller ID service of your phone service provider. turn this feature on (page 36). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your phone service provider following every ring. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:
R Make sure the units date and time setting is correct (page 16). Viewing the caller list and calling back n Using a cellular line 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press MSELECTN. To exit, press MOFFN. 4 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. For assistance, please visit http://shop.panasonic.com/support 43 Caller ID Service A specific line is set to make cellular calls (page 20). 5 MbN: Select the desired cellular phone. a MSELECTN n Using a landline 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M To exit, press MOFFN. N. Note:
R If the entry has already been viewed or answered, is displayed. R or indicates the caller information was received from the cellular line. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. n When a cellular phone is paired:
1 MCN CID 2 MbN: Select the desired entry. a MSELECTN 3 Press * (Edit) repeatedly until the phone number is shown in the desired format. 4 Using a cellular line:
To make a cellular call, continue from step 4, Viewing the caller list and calling back, page 43. Using a landline:
M N 1 MCN CID 2 MbN: Select the desired entry. a MMENUN 3 MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the phone number is shown in the desired format. 5 M N Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:
When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit
(page 37). The default setting is On. Note:
R Phone numbers from the 4 most recently edited area codes are automatically edited. Erasing selected caller information 1 MCN CID 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN Erasing all caller information 1 MCN CID 2 MERASEN a MbN: Yes a MSELECTN a MOFFN n When a cellular phone is not paired:
a MOFFN 44 For assistance, please visit http://shop.panasonic.com/support Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones
(not paired) to the units phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important:
R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.) is stored as a separate entry with the same name. R If a phonebook entry includes additional data such as a picture, that entry may fail to copy to the base unit. R If your cellular phone includes international call entries, set the conversion codes before copying (page 45). 1 Handset:
MMENUN#618 2 Handset:
To copy from paired cellular phones:
MbN: Select the desired cellular phone. a MSELECTN R Copied items are stored to the group
(Cell 1 or Cell 2) which the cellular phone is paired to. To copy from other cellular phones
(not paired):
MbN: Other cell a MSELECTN a MbN: Select the group you want to copy to. a MSELECTN When Use the cell to transfer phone book is displayed:
Go to step 4. When Select mode menu is displayed:
MbN: Select Auto or Manual. a MSELECTN Auto: Download all entries from the cellular phone automatically. Go to step 5. 3 Handset:
4 Cellular phone:
Using Bluetooth Devices Manual: Copy entries you selected. R Select mode menu is displayed only when the cellular phone supports Phone Book Access Profile (PBAP) for Bluetooth connection. R Some cellular phones may require you to perform an operation on the cellular phone even if you select Auto. Follow the instructions of your cellular phone to copy phonebook entries. R For other cellular phones (not paired), you need to search for and select the base unit. The Bluetooth PIN (default:
0000) may be required. R If your cellular phone prompts you to confirm the passkey, tap MOKN or otherwise to accept the pairing request. R The entries being copied are displayed on the handset. 5 Handset:
Wait until Completed is displayed. R You can continue copying other entries if necessary. 6 Handset: MOFFN Note:
R Some copied entries may have characters which are not available. These characters can be displayed but cannot be entered when editing an entry. R The unit does not support some characters. If a copied entry includes those characters, they are replaced with other available characters or H. R If you receive a call while copying phonebook entries, the copying procedure stops. Try again after finishing the call. Setting conversion codes You must first set the following 3 dialing codes before transferring the phonebook from your cellular phone (4 digits max. each). International code: An international prefix used when you make an international call. Country code: Your country code for international calls. For assistance, please visit http://shop.panasonic.com/support 45 Using Bluetooth Devices Trunk prefix: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code.
[International code], [Country code], and [Trunk prefix] (page 45)
*1 When your paired Android phone is within the base units range, the date and time information is updated on the handsets display, if time adjustment feature is activated on your Android phone. Installing the Link to Cell app Download links are also available at the web page below. www.panasonic.net/pcc/support/tel/
appalerts 1 MMENUN 2 To store International code:
#117 To store Country code: #118 To store Trunk prefix: #119 3 Enter the desired number. a MSAVEN a MOFFN Note:
R After you copy the entries, confirm that the numbers were transferred correctly. Link to Cell app For Android smartphone users The free Link to Cell app helps you integrate your Android phone with your DECT phone for convenient use. Important:
R Your cellular phone must support Serial Port Profile (SPP) specification. n Application (App) Alerts On/Off This feature alerts your DECT phone when your paired Android phone receives the following alert information:
[Google Calendar]
[Email]
[Gmail]
[Text messages]
[Facebook]
[Twitter]
[Instagram]
[Low Battery] information Starting the app for the first time 1 Make sure that your Android devices Bluetooth feature is turned on and that your Android device is paired to the base unit. 2 Start the Link to Cell app by tapping its icon. You can turn each type of alert on or off using the Link to Cell app. If you turn the alerting app on, your DECT phone alerts you with the corresponding information. 3 Follow the on-screen instructions. Important:
R For further information, refer to the n Phone Settings Using your paired Android phone, you can program your Phone Settings for the following features:
[Time adjustment]*1
[Cell line only mode] (page 19) instructions on web page listed above. R To use this feature, the following settings are required. Android phone: Bluetooth must be turned on. Android phone: [Application Alerts manager]*1 must be turned on. 46 For assistance, please visit http://shop.panasonic.com/support Handset: Alert On/Off must be turned on (page 47). R If this feature does not work, turn on your devices Bluetooth feature, unplug the base units AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts manager]
Use the following procedure after installing the Link to Cell app. Android 2.x: Open your devices
[Settings] app. a Tap [Accessibility]. a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes. Android 4.x: Open your devices
[Settings] app. a Tap [Accessibility]. a Turn on [Application Alerts manager]. Requirements R An Android device (Android 2.1 or later) Text message (SMS) alert For iPhone and BlackBerry users This feature alerts you on your DECT phone when your paired cellular phone receives SMS messages. The Link to Cell app is not required for iPhone and BlackBerry users. Important:
R Your cellular phone must support Message Access Profile (MAP) specification. R For further information, refer to the instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings are required:
iPhone and BlackBerry Phone:
Bluetooth must be turned on. Handset: Alert On/Off must be turned on (page 47). R If this feature does not work, turn on your devices Bluetooth feature, unplug the base units AC adaptor, and then reconnect it. Using Bluetooth Devices Alert settings for your DECT phone If your cellular phone is paired to the base unit and receives notifications, the handset can alert you:
by briefly displaying a message by announcement by sounding alert tones Important:
R For Android users: Use the Link to Cell app to enable the desired alerts (page 46). Turning alert on/off Once this feature is turned on, it will alert you on the handset when your cellular phone receives notifications. On (default): The handset alerts you. Off: The handset does not alert you. 1 For CELL 1: MMENUN#6101 For CELL 2: MMENUN#6102 2 MbN: Select the desired setting. a MSAVEN a MOFFN Setting the voice alert You can turn on/off the voice alert. On (default): The handset notifies you by voice announcement. Off: Voice announcement is not available as alert. 1 For CELL 1: MMENUN#6031 For CELL 2: MMENUN#6032 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting the alert tone 1 For CELL 1: MMENUN#6041 For CELL 2: MMENUN#6042 2 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support 47 Using Bluetooth Devices Remote voice assist For iPhone and Android smartphone users You can use the handset to operate the voice recognition feature of a paired cellular phone
(Siri, Google Now, or S Voice). For example, you can speak into the handset and command your cellular phone to make a call. Compatible voice recognition features R Google Now, S Voice (Android 4.0 or later) R Siri (iOS 8.0 or later) Important:
R Your cellular phone must support the Hands Free Profile (HFP) specification. R In order to use this feature, your cellular phones voice recognition feature must be ready to use. iPhone: Make sure Siri is turned on. Android: In order to use Google Now, make sure your cellular phone is registered to your Google account. R If you have multiple voice recognition features available for your cellular phone, you may need to set the desired voice recognition feature as the default. R For Android users: Depending on your cellular phone, you may need to set Google Now or S Voice as your cellular phones default voice recognition feature. For more information, refer to the operating instructions of your cellular phone. 1 M N R Go to step 3 in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 2 MbN: Select the desired cellular phone. a MSELECTN 3 Wait until Voice assist is displayed. R A confirmation tone sounds. R Speakerphone is turned on automatically. R To switch to the receiver, press MZN. 4 Speak your commands to your handset. R When you have finished using remote voice assist, press MOFFN. Note:
R While using this feature, you cannot use another handset to make a cellular call using the same cellular line. R If you receive a call on the landline or on another cellular line while using this feature, the interrupt tone sounds. R If you receive a call on the same cellular line while using this feature, voice recognition ends and the unit receives the incoming call. R If your cellular phone is connected to the base unit, you may not be able to use your cellular phones microphone to operate its voice recognition feature. In this case, disconnect your cellular phone from the base unit. R The compatible voice commands depends on the cellular phone voice recognition feature. Using a Bluetooth headset
(optional) By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on landline calls. Important:
R Your Bluetooth headset must support the Headset Profile (HSP) specification. R Only 1 Bluetooth headset can be paired to R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R For best performance, we recommend using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit can communicate with Bluetooth headsets within an approximately 10 m (33 feet) range.
*1 You cannot use a Bluetooth headset to talk on a cellular line. Activating remote voice assist the base unit. 48 For assistance, please visit http://shop.panasonic.com/support Pairing a Bluetooth headset to the base unit Important:
R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Bluetooth headset:
Set your headset to pairing mode. R Refer to the headsets operating instructions. 2 Handset:
MMENUN#621 3 If your headset PIN is 0000, go to step 4. If your headset PIN is not 0000, press MCLEARN, then enter your headsets PIN. R Typically, default PIN is 0000. Refer to the headsets operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When the Bluetooth headset is ready for use, the HEADSET indicator on the base unit lights up. Connecting/disconnecting a Bluetooth headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important:
R Make sure that the headset is turned on. 1 To connect/disconnect:
MMENUN#622 R A long beep sounds. 2 MOFFN Unpairing a Bluetooth headset You can cancel a pairing of the headset that is stored to the base unit. 1 MMENUN#612 Using Bluetooth Devices 2 MbN: Yes a MSELECTN R When the headset is unpaired, the HEADSET indicator is turned off. 3 MOFFN Operating a Bluetooth headset using a landline Important:
R Refer to your headsets operating instructions for details. R Some features described here may not be available depending on Bluetooth headset. Answering landline calls with your headset To answer a landline call, press your headsets button. When you finish talking, press your headsets button. Note:
R If you cannot hang up the call using your N (STOP) on the base headset, press M unit. Call sharing between your headset and the handset Important:
R To activate this feature, you should set call sharing mode to on beforehand (page 38). n While the handset is on a landline call:
To join the conversation with your headset, press your headsets button. n While your headset is on a landline call:
To join the conversation with the handset, press M N. Switching between the base unit and your headset You can switch from the base unit to your headset while listening to messages recorded on the base unit answering system. R You can only switch from the base unit to your headset. For assistance, please visit http://shop.panasonic.com/support 49 Using Bluetooth Devices n To switch to your headset:
Press your headsets button. Adjusting your headset receiver volume Base unit Press MjN or MkN repeatedly while using your headset. Note:
R Depending on your headset, the receiver volume may not be adjustable. 50 For assistance, please visit http://shop.panasonic.com/support Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 55). Important:
R Make sure the units date and time setting is correct (page 16). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes. A maximum of 64 messages can be recorded. Note:
R When message memory becomes full:
Messages full is shown on the handset display. The message counter on the base unit flashes if the answering system is turned on. If you use the pre-recorded greeting message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Answering System for Landline Handset 1 To turn on:
MMENUN#327 To turn off:
MMENUN#328 2 MOFFN Note for base unit and handset:
R When the answering system is turned on, the message counter on the base unit displays the total number of messages (old and new). Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:
your own greeting message a pre-recorded greeting message Recording your greeting message 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:
If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. If the message recording time (page 55) is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. For assistance, please visit http://shop.panasonic.com/support 51 Answering System for Landline Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Using the base unit When new messages have been recorded, the message indicator (
) on the base unit flashes. Press M R During playback, the message indicator N (PLAY).
) on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Key Operation Adjust the speaker volume Repeat message*1 Skip message MjN or MkN N N M M M MERASEN N (STOP) Stop playback Erase currently playing message
*1 If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:
MMENUN#323 To listen to all messages:
MMENUN#324 2 When finished, press MOFFN. Note:
R To switch to the receiver, press M R You can also use the MPLAYN soft key, if N. displayed, to play new messages. Operating the answering system MMENUN a MbN: Answering device a MSELECTN Key Operation MDN or MCN 1 or MFN 2 or MEN 3 4 5 6 76 8 9 or MSTOPN 0
*4*3 Adjust the receiver/speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Stop recording Stop playback Turn answering system off Erase currently playing message MPAUSEN Pause message*2
*5 Erase all messages 52 For assistance, please visit http://shop.panasonic.com/support Answering System for Landline 4 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 5 MbN: Select the desired cellular phone. a MSELECTN Erasing all messages 1 MMENUN#325 2 MbN: Yes a MSELECTN a MOFFN Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:
R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMENUN#306 2 Enter the desired 3-digit remote access code. a MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 53. R The entered remote access code is deleted. Key
*6 Operation Reset to a pre-recorded greeting message
*1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 To resume playback:
MbN: Playback a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Calling back (Caller ID subscribers only) n Using a landline:
1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN n Using a cellular line:
1 Press MPAUSEN during playback. 2 MbN: Call back (Cell) a MSELECTN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 3 MbN: Select the desired cellular phone. a MSELECTN Editing the number before calling back n Using a landline:
1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format
(page 44). N 4 M n Using a cellular line:
1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format
(page 44). For assistance, please visit http://shop.panasonic.com/support 53 Answering System for Landline Using the answering system remotely 1 Dial your landline phone number from a touch-tone phone. 2 After the greeting message starts, enter your remote access code. 3 Follow the voice guidance prompts as necessary or control the unit using remote commands (page 54). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 54). Note:
R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key 1 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off
*4 Erase currently playing message 2 4 5 9 0 54 Key Operation
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only Turning on the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 53). Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the units speaker. To adjust the speaker volume, press MDN or MCN repeatedly. You can answer the call by pressing M the handset. Call screening can be set for each unit. The default setting is On. 1 MMENUN#310 2 MbN: Select the desired setting. a N on MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit For assistance, please visit http://shop.panasonic.com/support Answering System for Landline answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 54), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 55. Note:
R When you select Greeting only:
If you do not record your own message, the unit will play the pre-recorded greeting-only message asking callers to call again later. If you use your own message, record the greeting-only message asking callers to call again later (page 51). For assistance, please visit http://shop.panasonic.com/support 55 Useful Information Voicemail service for landline In addition to your units answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the units answering system. R To use the voicemail service rather than the units answering system, turn off the answering system (page 51). If you have units answering system set to on and also the voicemail enabled, the system with least amount of rings will record the message first. Example:
If the units answering system is set to 4 rings
(page 54) and the voicemail answering system provided by your phone company is set to 6 rings (call your service provider), the units answering system will record the incoming call first. Storing the voicemail (VM) access number In order to listen to your voicemail messages, you must dial your phone service providers voicemail access number. Once you have stored your voicemail access number, you can dial it automatically (page 56). 1 MMENUN#331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:
R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 22) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Example:
To erase the voicemail access number 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Your phone service provider sends special signals (sometimes called voicemail tones or stutter tones) to the unit to let you know you have new voicemail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M handset, you have new voicemail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voicemail messages have been recorded. Turn this feature off when:
You do not subscribe to voicemail service. Your phone service provider does not send N on the voicemail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your phone service provider. Turning VM tone detection on/off The default setting is On. 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to voicemail messages When new messages have been recorded, Voicemail msg. via phone co. is displayed if message indication service is available. 1 MMENUN#330 R The speakerphone turns on. 56 For assistance, please visit http://shop.panasonic.com/support 1-222-333-4444VM access numberPausesPasswordPPPP8888 Useful Information AC adaptor cord and telephone line cord
(B). AC adaptor cord 3 Insert the hooks on the wall mounting adaptor into holes (
base unit.
) and (
) on the 2 Follow the pre-recorded instructions. 3 When finished, hang up. Note:
R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Wall mounting Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Base unit 1 Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 2 Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the For assistance, please visit http://shop.panasonic.com/support 57 1A1121212 Useful Information 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Mount the unit on a wall then slide down to secure in place. AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 83 mm (3 1/4 inches) 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (
) respectively.
) and (
58 For assistance, please visit http://shop.panasonic.com/support 123451542345 To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). Useful Information Charger Drive the screws (
wall. 27.2 mm (1 1/16 inches)
) (not supplied) into the For assistance, please visit http://shop.panasonic.com/support 59 BAA1212 Useful Information Error messages Ask phone company for VM access #
Busy Display message Cause/solution R You have not stored the voicemail access number. Store the number (page 56). R No cellular phone is paired to the base unit. Pair a cellular phone (page 17). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The voice recognition feature could not be activated. Try again later. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 11). R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode
(page 19). R Recording was too short. Try again. R Someone is using a cellular line or headset. Try again later. R The phonebook copy is incomplete (page 45). The cellular phone is disconnected from the base unit. Make sure that other Bluetooth devices are not connected to the cellular phone, and try again. R Although the unit tried to connect to the cellular phone or headset, the connection has been failed. Someone is using a cellular line or headset. Try again later. Make sure that the cellular phone or headset is not connected to other Bluetooth devices. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 41). Check tel line Error!!
Failed Invalid 60 For assistance, please visit http://shop.panasonic.com/support Display message Cause/solution Main unit no power or No link. Re-
connect base AC adaptor. Requires subscription to Caller ID. Use rechargeable battery. Useful Information R Confirm the base units AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handsets registration may have been canceled. Re-register the handset (page 41). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 8. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. Cause/solution the handset. R Place the handset on the base unit or charger to turn on R Make sure the batteries are installed correctly (page 11). R Fully charge the batteries (page 12). R Check the connections (page 11). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 41). For assistance, please visit http://shop.panasonic.com/support 61 Useful Information Problem Cause/solution I cannot pair a cellular phone to the base unit. I cannot connect a cellular phone to the base unit. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range R Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. R Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from your cellular phone. R Some cellular phones may require you to enter the Bluetooth PIN to pairing. Confirm that you entered the correct PIN.
(page 14). it on. R Your cellular phones Bluetooth feature is turned off. Turn R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually (page 19). R The cellular phone has not been paired to the base unit. Pair the cellular phone (page 17). R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset or other Panasonic DECT phone, disconnect the device, then perform the connecting procedure to the base unit. R If your cellular phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone. connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. I cannot hear a dial tone. R The base units AC adaptor or telephone line cord is not 62 For assistance, please visit http://shop.panasonic.com/support Useful Information Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Cause/solution R Change the display language (page 16). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 41). Battery recharge Problem Cause/solution The handset beeps and/or flashes. I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. R Battery charge is low. Fully charge the batteries (page 12). R Clean the battery ends (
) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 11). Making/answering calls, intercom Problem is displayed. Cause/solution Noise is heard, sound cuts in and out. R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it
(page 41). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 22, 34). R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 18. R Silent mode is turned on. Turn it off (page 40). R The ringer volume is turned off by pressing and holding
). Press and hold 0 (
) again to turn it on 0 (
(page 22). The handset or base unit does not ring. R The ringer volume for landline is turned off. Adjust the ringer volume (page 22, 36). For assistance, please visit http://shop.panasonic.com/support 63 Useful Information Problem Cause/solution I cannot make local calls with the handset using a cellular line. I cannot make or answer cellular calls with the handset. R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 20). R Depending on the cellular phones compatibility (page 5), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit (page 19). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The cellular phone is being used separately from your I can make and answer cellular calls but cannot hear a sound. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and system. try again. I cannot switch cellular calls from the unit to the cellular phone. I cannot make a call using a landline. I cannot use a cellular line or a landline. I cannot make long distance calls. Caller ID/Talking Caller ID R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone. R The dialing mode may be set incorrectly. Change the setting (page 16). R The unit can be used to talk on 2 lines at the same time
(for example, 2 cellular lines, or the landline and 1 cellular line). R Make sure that you have long distance service. Problem Cause/solution Caller information is not displayed. R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service for landline calls may not be available in some areas. Contact your phone service provider for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. 64 For assistance, please visit http://shop.panasonic.com/support Problem Cause/solution Caller information is displayed or announced late. Caller information is not announced. Useful Information R Depending on your phone service provider, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. R The ringer volume for landline is turned off. Adjust the R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 36). ringer volume (page 34). R The unit which is not selected to ring for cellular calls does not announce caller information. To change the selection, see page 18. R The Talking Caller ID feature is turned off. Turn it on
(page 36). R The ring as cell mode is set to On (without Talking CID). To change the mode, see page 18. R The number of rings for the answering system is set to 2 rings or Toll saver. Select a different setting
(page 54). R Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call. R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 37). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 44). changes the time. Set the time adjustment to Manual
(off) (page 36). R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. The 2nd callers information is not displayed during an outside call. Time on the unit has shifted. R Incorrect time information from incoming Caller ID For assistance, please visit http://shop.panasonic.com/support 65 Useful Information Using Bluetooth devices Problem Cause/solution I cannot copy phonebook entries from a cellular phone. wireless technology. R Confirm that the cellular phone supports Bluetooth I cannot have a conversation using the headset. or I cannot connect my headset to the base unit. R Confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. R Your Bluetooth headset is not paired. Pair it (page 49). R Turn your headset off, then turn it on and try again. R If your headset is already connected to another Bluetooth R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone. R Someone is using a cellular line or headset. Try again later. R Turn the cellular phone off, then turn it on and try again. R If an entry is already stored in the units phonebook, the entry cannot be copied even by selecting another group. R iPhone does not support individual phonebook copy. device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R A Bluetooth headset can communicate with the base unit within a range of approximately 10 m (33 feet). The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the base unit. R The base unit does not support enhanced features such as Last number redial or Call reject. R The Bluetooth feature cannot be accessed immediately after connecting the AC adaptor to the base unit. Wait a few seconds and try again. R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again. Noise is heard during a call on the headset. Some headset enhanced features are not available. An error tone is heard when I try to program the Bluetooth feature. 66 For assistance, please visit http://shop.panasonic.com/support Problem Cause/solution App alert is not displayed or announced. or Text message alert is not displayed or announced. Useful Information
(page 47). turned off. in use. in use. it on. R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. R Confirm that the [Application Alerts manager] setting of your Android phone is turned on. R Alert On/Off is set to Off. Set it to On R Voice alert is set to Off. Set it to On (page 47). R The Bluetooth devices Bluetooth notifications setting is R The handset selected to display and/or announce alerts is R The Bluetooth device or its corresponding cellular line is R Your cellular phones Bluetooth feature is turned off. Turn R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 18. R This feature may not be available when your cellular phone is in use. Try again later. R If you cannot use this feature while your cellular phone is locked, unlock your phone and try again. R For some cellular phones, you may be able to set your phone to allow its voice recognition feature to be used even when the phone is locked. For more information, refer to the operating instructions of your cellular phone. R You may not be able to use this feature if other features or applications on your cellular phone are using Bluetooth features. Turn off these features or exit these applications, and then try again. R In order to use this feature, your cellular phones voice recognition feature must be ready to use. iPhone: Make sure Siri is turned on. Android: In order to use Google Now, make sure your cellular phone is registered to your Google account. R If you have multiple voice recognition features installed in your cellular phone, you may need to set the desired voice recognition feature as the default. If you cannot set the default, delete the other voice recognition features. Your cellular phones voice recognition feature does not start after pressing M N. The desired app does not start when you try to start the app using remote voice assist. For assistance, please visit http://shop.panasonic.com/support 67 Useful Information Answering system Problem Cause/solution The unit does not record new messages. R The answering system is turned off. Turn it on (page 51). R The answering system does not answer or record calls I cannot operate the answering system remotely. R The remote access code is not set. Set the remote access code (page 53). from cellular lines. R The message memory is full. Erase unnecessary messages (page 52, 52). R The recording time is set to Greeting only. Change the setting (page 55). R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 54) to a lower value, or contact your phone service provider. R The answering system will not answer incoming calls while the other devices such as headset or handsets are engaged in a call. R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code
(page 53). R The answering system is turned off. Turn it on (page 54). R You cannot operate the answering system when calling a cellular phone paired to the base unit. R If the first ring is turned off (No) (page 27), the number of rings decreases by 1 from the specified number of rings. R Change the PIN using the following method. 1 MMENUN#619 2 *7000 3 Enter the new 4-digit PIN. a MOKN 4 Enter the new 4-digit PIN again. a MSAVEN a MOFFN The unit does not emit the specified number of rings. Bluetooth PIN Problem Cause/solution I cannot remember the PIN. 68 For assistance, please visit http://shop.panasonic.com/support Voicemail Problem Voicemail msg. via phone co. is shown on the handset display. How do I remove this message from the display?
Useful Information Cause/solution R This notification is displayed when your phone service providers voicemail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. Liquid damage Problem Cause/solution Liquid or other form of moisture has entered the handset/base unit. R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process. For assistance, please visit http://shop.panasonic.com/support 69 Useful Information FCC and other information 70 For assistance, please visit http://shop.panasonic.com/support This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information For assistance, please visit http://shop.panasonic.com/support 71 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearbyTVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information 72 For assistance, please visit http://shop.panasonic.com/support Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 73 Conexiones1 Conecte el adaptador de corriente alterna a la toma de corriente.Unidad base1 Conecte el adaptador de corriente alterna a la unidad presionndolo firmemente.2 Conecte el adaptador de corriente alterna a la toma de corriente.3 Conecte el cable de la lnea telefnica a la unidad, y despus a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.4 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.Nota:LUse solo el adaptador de corriente alterna Panasonic PNLV226 que se suministra.13243Cargador1 Gua Rpida Espaola 74 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Instalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tamao AAA (R03) ().LNO utilice bateras alcalinas, de manganeso ni de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla.LConfirme que aparezca Cargando ().Retire la bateraSugerencias de operacinTeclas de funcinAl oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin.Tecla navegadora{^}, {V}, {<} o {>}: Navegue por diversas listas y elementos.VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.{<} k: Vea la entrada del directorio telefnico.{>} REDIAL (Remarcacin): Vea la lista de remarcacin.{V} CID (Identificador de llamadas): Vea la lista de personas que llamaron.2142311212{V}{^}{<}{>}Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 75 Cambio de idiomas (Auricular) (predeterminado: English)Cuando instale las bateras por primera vez, es posible que aparezca Set date/time Press SELECT. Oprima {OFF} para salir.Idioma de la pantalla{MENU}(11) s {r}: Espaol s {GUARDAR} s {OFF} Idioma de anuncio de voz{MENU}(112 s {r}: Espaol s {GUARDAR} s {OFF}Fecha y hora (Auricular)1{MENU}(1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales (formato de reloj de 24 horas).4{GUARDAR} s {OFF}Cmo grabar el mensaje de saludo del contestador de llamadas para la lnea terrestre (Auricular)Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado.1{MENU}(3)2 s {r}: S s {SELEC.}2Despus de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20cm (8pulgadas) y hable con claridad en el micrfono (mx. de 2 minutos).3Oprima {PARAR} para dejar de grabar. s {OFF}Enlace a celularPuede conectar su unidad base y telfono celular usando la tecnologa inalmbrica Bluetooth, para poder hacer o responder llamadas a su telfono celular usando su sistema telefnico. Para obtener ms detalles, visite nuestro sitio web: http://shop.panasonic.com/bluetooth-phoneLColoque su telfono celular cerca de la unidad base. Si su telfono celular est demasiado cerca de la unidad base durante la llamada celular, es posible que escuche ruido. Para un mejor funcionamiento, le recomendamos que coloque su telfono celular de 0.6 m a 3 m (2 pies a 10 pies) de la unidad base.1 Lnea celular2 Proveedores de servicios de telefona celularMarcas registradasLLa marca denominativa y los logotipos de Bluetooth son marcas registradas de Bluetooth SIG, Inc., y cualquier uso de dichas marcas por parte de Panasonic Corporation se hace bajo licencia.LTodas las dems marcas comerciales que se identifican en el presente pertenecen a sus respectivos propietarios.12 Gua Rpida Espaola 76 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Cmo emparejar un telfono celular con Bluetooth1Unidad base:Oprima y mantenga oprimido {CELL 1} o {CELL 2} durante aproximadamente 5 segundos.LDespus de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.2Su telfono celular:Mientras el indicador de CELL correspondiente est parpadeando, siga las instrucciones de su telfono celular para entrar al modo de emparejamiento.LDependiendo de su telfono celular, es posible que le pida que introduzca el NIP de Bluetooth (predeterminado: 0000). LSi el telfono celular le solicita que confirme la clave, oprima {OK} o acepte la solicitud de enlace.3Unidad base:Espere a que se emita un pitido largo.LEs posible que tarde ms de 10 segundos en completar el emparejamiento.LCuando el indicador de CELL correspondiente se ilumina, esto significa que el telfono celular est conectado a la unidad base. Ya est listo para hacer llamadas regulares de celular.Nota:LAsegrese de que su telfono celular est configurado para conectarse a este producto automticamente. Consulte las instrucciones de operacin de su telfono celular.Unidad base: Indicadores de CELLodacifingiSodatsEEncendidoUn telfono celular est conectado. Listo para hacer o recibir llamadas celulares.ParpadeandoLa lnea del celular se est usando.Las entradas del directorio telefnico se estn copiando desde un telfono celular.La unidad base est buscando el telfono celular emparejado.La unidad base est emparejando un telfono celular.Hay una llamada de celular en espera.La funcin de asistencia de voz remota est en uso.Parpadea rpidamenteSe est recibiendo una llamada de celular.Luz apagadaNo hay un telfono celular emparejado con la unidad base.No hay un telfono celular conectado a la unidad base.Auricular: enlace a elementos de la pantalla del celulartdSe est usando una lnea de celular.*1LCuando parpadea: La llamada celular est en espera.LCuando parpadea rpidamente: se est recibiendo una llamada celular.La funcin de asistencia de voz remota est en uso.*1Las lneas correspondientes (1, 2: lnea del celular) se indican junto al elemento.xdUn telfono celular est conectado.*1 Listo para hacer o recibir llamadas celulares.LCuando est apagado: no hay un telfono celular conectado a la unidad base.*1Las lneas correspondientes (1, 2: lnea del celular) se indican junto al elemento.uvSe est haciendo una llamada de celular en esa lnea.La lnea celular est seleccionada para la configuracin.Enlace a celular Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 77 Cmo conectar o desconectar el telfono celular (Auricular)Conexin automtica a los dispositivos con Bluetooth (telfonos celulares)La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexin. Consulte las instrucciones de operacin para cambiar el intervalo (predeterminado: 1 min).LCuando se sincronizan 3 dispositivos con capacidad Bluetooth (2 telfonos celulares y 1 auricular) a la unidad base, slo 2 dispositivos Bluetooth pueden usarse con la unidad a la vez, y la unidad base pierde su conexin con otros dispositivos Bluetooth. Para restablecer la conexin a los dispositivos Bluetooth automticamente, deje encendida la conexin automtica.Cmo conectar o desconectar manualmente el telfono celularSi no va a utilizar el vnculo del telfono celular emparejado a la funcin del celular temporalmente (por ejemplo, si no quiere que la unidad timbre cuando su lnea celular reciba una llamada), puede desconectar su telfono celular de la unidad base. Si desea usarlo de nuevo, reconecte el telfono celular a la unidad base.LDespus de desconectar un telfono celular emparejado de la unidad base manualmente, se conectar automticamente a la misma en 30 minutos. Si ya no usa la funcin de enlace al celular, deshaga el emparejamiento del celular.LLos telfonos celulares desconectados no se desemparejan de la unidad base, as que no es necesario emparejarlos de nuevo con ella.1Para conectarlo o desconectarlo:Para CELL 1: {MENU}(6251Para CELL 2: {MENU}(6252LSe emite un pitido largo.2{OFF}Modo exclusivo para la lnea celular (si no utiliza la lnea terrestre) (Auricular)Si no utiliza la lnea terrestre, recomendamos configurar la unidad en el modo exclusivo para la lnea celular. La configuracin predeterminada es Apagado.LSi enciende el Modo Ln. Cel., desconecte el cable de la lnea telefnica de la unidad base. De lo contrario, no es posible activar el Modo Ln. Cel..1{MENU}(1572Para encenderlo:{r}: Encendido s {SELEC.} s {r}: S s {SELEC.}Para apagarlo: {r}: Apagado s {SELEC.}Enlace a celular Gua Rpida Espaola 78 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Operaciones bsicasCmo hacer y contestar llamadas (Auricular)Para hacer llamadas de celular1Marque el nmero telefnico. s {CEL.}LCuando el modo exclusivo para la lnea celular est configurado, tambin puede oprimir {C}/{s} en lugar de {CEL.}.LCuando solo hay 1 telfono celular emparejado, la unidad comienza a marcar.2Cuando hay 2 telfonos celulares emparejados:{r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer llamadas por la lnea terrestreMarque el nmero telefnico. s {C}/{s}Para contestar llamadas{C}/{s}Para colgar{OFF}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin1{>} REDIAL s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular:Cuando solo 1 telfono celular est emparejado: {CEL.}oCuando 2 telfonos celulares estn emparejados:{CEL.} s {r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer una llamada terrestre:{C}Para ajustar el volumen del timbre (lnea de celular/lnea terrestre)Oprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra. Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 79 Directorio telefnico (Auricular)Para aadir entradas1{<} k s {MENU}2{r}: Agregar Ent. Nueva s {SELEC.}3Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}4Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK} 5{r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF}LEn el paso 3, puede cambiar el idioma de introduccin de caracteres.( s {r}: Seleccione el idioma deseado. s {OK}Para hacer llamadas1{<} k s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular:Cuando solo 1 telfono celular est emparejado: {CEL.}oCuando 2 telfonos celulares estn emparejados:{CEL.} s {r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer una llamada terrestre:{C}Contestador de llamadas de la lnea terrestre (Unidad base)Contestador encendido/apagadoOprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas.Para escuchar mensajes{P} (PLAY)Contestador de llamadas de la lnea terrestre (Auricular)Para escuchar mensajesPara escuchar mensajes nuevos:{REPROD.} o {MENU}(323Para escuchar todos los mensajes:{MENU}(324Operaciones bsicas Gua Rpida Espaola 80 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Cmo usar dispositivos BluetoothCopiado de entradas del directorio telefnico desde un telfono celular con Bluetooth (transferencia del directorio telefnico)Puede copiar entradas del directorio telefnico desde los telfonos celulares emparejados o desde otros telfonos celulares (no emparejados) al directorio telefnico de la unidad.1Auricular: {MENU}(6182Auricular:Para copiar desde telfonos celulares emparejados: {r}: Seleccione el telfono celular deseado. s {SELEC.}LLos elementos copiados se almacenan en el grupo (Cel. 1 o Cel. 2) en el que est emparejado el telfono celular. Para copiar desde otros telfonos celulares (no emparejados): {r}: Otro celular s {SELEC.} s {r}: Seleccione el grupo al que desea copiar. s {SELEC.}3Auricular:Cuando aparezca Transf. datos del directorio del celular : Vaya al paso 4.Cuando aparezca el men Selec. modo : {r}: Seleccione Auto o Manual. s {SELEC.}Auto: Descargue todas las entradas del telfono celular automticamente. Vaya al paso 5.Manual: Copie las entradas que seleccion.LEl men Selec. modo aparece solo cuando el telfono celular soporta Perfil de Acceso a Directorio Telefnico (PBAP) para la conexin Bluetooth.4Telfono celular:Siga las instrucciones de su telfono celular para copiar las entradas del directorio telefnico. LPara otros telfonos celulares (no emparejados), necesita buscar y seleccionar la unidad base. Quizs requiera el NIP de Bluetooth (predeterminado: 0000). LSi el telfono celular le solicita que confirme la clave, oprima {OK} o acepte la solicitud de enlace.LLas entradas que se estn copiando aparecen en el auricular. 5Auricular: Espere a que aparezca Completo. s {OFF}Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 81 Cmo usar un audfono Bluetooth (opcional)Al emparejar un audfono Bluetooth con la unidad base, podr tener conversaciones a manos libres para llamadas terrestres.LSolo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 lneas celulares o el audfono y 1 lnea celular*1).*1No es posible usar un audfono Bluetooth para hablar en una lnea celular.Cmo emparejar un audfono Bluetooth con la unidad base1Audfono Bluetooth:Configure su audfono en modo de emparejamiento.LConsulte las instrucciones de operacin de su audfono.2Auricular:{MENU}(6211 Empareje usando el auricular.2 Emparejamiento3Si el NIP de su audfono es 0000, vaya al paso 4. Si el PIN de su audfono no es 0000, oprima {BORRAR} y, a continuacin, escriba el PIN de su audfono.LPor lo general, el NIP predeterminado es 0000. Consulte las instrucciones de operacin del audfono.4Oprima {OK}, y despus espere a que se emita un pitido largo. s {OFF}LCuando el audfono Bluetooth est listo para usares, el indicador HEADSET en la unidad de base se enciende.Cmo operar un audfono con Bluetooth usando una lnea terrestreLPara obtener detalles, consulte las instrucciones de operacin de su audfono.LEs posible que algunas funciones descritas aqu no estn disponibles segn el auricular Bluetooth.NCmo contestar llamadas de la lnea terrestre con su audfonoPara contestar una llamada de lnea terrestre, oprima el botn del audfono.Cuando termine de hablar, oprima el botn del audfono.LSi no puede colgar la llamada usando su audfono, oprima {P} (STOP) en la unidad base.Cmo usar dispositivos Bluetooth21 Gua Rpida Espaola 82 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {MENU}(13)2Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Por qu no es posible emparejar un telfono celular con la unidad base?LDependiendo de la compatibilidad del telfono celular, es posible que no pueda emparejarlo con la unidad base. Para obtener ms informacin, visite: http://shop.panasonic.com/bluetooth-phoneLConfirme que la funcin de Bluetooth de su telfono celular est encendida. Es posible que necesite encender esta funcin dependiendo de su telfono celular.Por qu no se escucha el tono de marcacin? (lnea celular)LEl telfono celular no se ha emparejado con la unidad base. Empareje el telfono celular.Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de volumen {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base,visite: http://shop.panasonic.com/supportEs posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-TGDA50/KX-TGDA51), visite: http://shop.panasonic.com/supportLos usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-877-833-8855.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (2a llamada)?LOprima {FLASH} cuando escuche el tono de llamada en espera. Customer services Appendix For assistance, please visit http://shop.panasonic.com/support 83 Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informa!on, Opera!ng Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Appendix Limited Warranty (ONLY FOR U.S.A.) 84 For assistance, please visit http://shop.panasonic.com/support Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix For assistance, please visit http://shop.panasonic.com/support 85 Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 Index Index
3-way conference: 23 A Additional handset: 41 Alarm: 40 Answering calls: 22 Answering system Call screening: 54 Erasing messages: 52, 53, 54 Greeting message: 51 Greeting only: 55 Listening to messages: 52, 54 Number of rings: 54 Recording time: 55 Remote access code: 53 Remote operation: 53 Ring count: 54 Toll saver: 54 Turning on/off: 51 Assist button: 14 Auto talk: 22, 37 B Battery: 11, 12 C Call block: 26 Bluetooth wireless technology Cellular phone (Link to cell): 17 Headset: 48 Phonebook transfer: 45 Booster (Clarity booster): 23 One ring for blocked call: 27 Call share: 23, 38 Call waiting: 23 Call Waiting Caller ID: 23 Caller ID number auto edit: 37, 44 Caller ID service: 43 Caller list: 43 Caller list edit: 44 Cellular calls: 21 Cellular phone Pairing: 17 Unpairing: 17 Chain dial: 30 CID (Caller ID): 43, 44 Conference calls: 24 Control type: 14 Customer support: 38 D Date and time: 16 Dialing mode: 16 Direct command code: 32 Display Contrast: 37 86 E Language: 16 Eco mode: 13 Error messages: 60 Flash: 23, 38 F G Groups: 29 H Handset Deregistration: 41 Name: 41 Registration: 41 Hold: 22 Intercom: 25 I K Key detector: 37, 38 L Key tone: 37 Landline calls: 21 Line mode: 38 Link to cell Alert settings for your DECT phone: 47 Area code: 20 Auto connection: 18 Cellular line only mode: 19 Cellular line selection: 20 Connection: 19 Link to Cell app: 46 Ring as cell mode: 18 Select unit to ring: 18 Text message (SMS: Short Message Service) alert: 47 P M Making calls: 21 Missed calls: 43 Mute: 23 Pause: 22 Phonebook: 28 PIN: 20 Power failure: 12 R Redialing: 21, 22 Remote voice assist: 48 Ringer ID: 29 Ringer tone: 34, 36 Rotary/pulse service: 23 Silent mode: 40 Speed dial: 30 SP-PHONE (Speakerphone): 21 Talking Caller ID: 43 Temporary tone dialing: 23 Time adjustment: 36 Transferring calls: 24 Troubleshooting: 61 TTY: 83 VM (Voicemail): 56 S T V Voice announcement language: 16 Voicemail: 56 Volume Receiver: 21 Ringer (Base unit): 22, 34, 36 Ringer (Handset): 22, 34, 36 Speaker: 21 W Wall mounting: 57 Index 87 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No. Date of purchase
(found on the bottom of the base unit) Name and address of dealer Attach your purchase receipt here. Panasonic Corporation 2016 Printed in Malaysia
*PNQX8351YA*
*PNQX8351YA*
PNQX8351YA TT1116MU1067 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490
1 2 3 | Internal Photos | Internal Photos | 246.99 KiB | December 09 2020 / June 07 2021 | delayed release |
1 2 3 | External Photos | External Photos | 182.15 KiB | December 09 2020 / June 07 2021 | delayed release |
1 2 3 | Label and Label Location | ID Label/Location Info | 36.23 KiB | December 09 2020 |
EXHIBIT B MARKINGS Base Unit:
The base unit provides with the following marking, or equivalent. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. NOTE: Above markings are shown on bottom of the base unit.
1 2 3 | Cover Letters | Cover Letter(s) | 55.22 KiB | December 09 2020 |
Ben Botros, Project Manager Safety, Compliance and Quality Assurance Request for Confidentiality November 11, 2020 PCTP-20-F005 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern;
Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of six months from the date of this letter. Type Filing:
FCC ID:
FCC Rule Part:
Original Application for UPCS Cordless Telephone Base Station 2 ACJ96NKX-TGD560A FCC Part 15, Subpart B (JAB), C (DTS) and D (UPCS) Request For Permanent Confidentiality In accordance with provisions of Sections 0.457(d) and 0.459 of the Commissions Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain:
(1) Description of Electrical Circuitry;
(2) Schematic Diagrams of Base Unit and RF Unit; and
(3) Base Unit Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. Request For Short-Term Confidentiality In accordance with FCC Public DA 04-1705, we request 180 day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain:
(1) External Photographs of Base Unit and RF Unit;
(2) Internal Photographs of Base Unit and RF Unit;
(3) Test Setup Photographs; and
(4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Ben Botros Project Manager Panasonic Corporation of North America Product Safety and Compliance Department Two Riverfront Plaza | Newark, NJ 07102-5490
1 2 3 | Test Setup Photos | Test Setup Photos | 850.78 KiB | December 09 2020 / June 07 2021 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-12-09 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 1921.536 ~ 1928.448 | PUB - Part 15 Unlicensed PCS Base Station | ||
3 | JAB - Part 15 Class B Digital Device |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2020-12-09
|
||||
1 2 3 | Applicant's complete, legal business name |
Panasonic Corporation of North America
|
||||
1 2 3 | FCC Registration Number (FRN) |
0003762242
|
||||
1 2 3 | Physical Address |
Two Riverfront Plaza, 9th Floor
|
||||
1 2 3 |
Newark, NJ
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
v******@nemko.com
|
||||
1 2 3 |
V******@nemko.com
|
|||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A3: Unlicensed Personal Communication System (PCS) devices
|
|||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
ACJ
|
||||
1 2 3 | Equipment Product Code |
96NKX-TGD560A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
B**** B****
|
||||
1 2 3 | Title |
Project Manager
|
||||
1 2 3 | Telephone Number |
201-3********
|
||||
1 2 3 | Fax Number |
201-3********
|
||||
1 2 3 |
B******@us.panasonic.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/07/2021 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | PUB - Part 15 Unlicensed PCS Base Station | |||||
1 2 3 | JAB - Part 15 Class B Digital Device | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UPCS Cordless Telephone Base Statation with Bluetooth Transceiver | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power is conducted. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Nemko AS
|
||||
1 2 3 | Name |
H******** V****
|
||||
1 2 3 | Telephone Number |
+4722********
|
||||
1 2 3 |
H******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0068000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15D | 1921.53600000 | 1928.44800000 | 0.0660000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC