FCC ID: ACJ9TGWL16B Wireless Network Adapter

OPERATING INSTRUCTIONS Read Me First Tablet Computer Model No. FZ-M1 series Contents Read Me First Safety Precautions .....................................2 Regulatory Information .............................12 Getting Started Introduction ...............................................23 First-time Operation ..................................24 n Terms and illustrations in these instructions In these instructions, the names and terms are referred as follows. CAUTION : Conditions that may result in minor or moderate injury. NOTE : Useful and helpful information. Windows 10 Pro 64-bit as Windows or Windows 10

(Settings) :

-

:

:

(Start) and then touch Touch Page in these Operating Instructions. Reference to the on-screen manuals.

(Settings). Please read these instructions carefully before using this product, and save this manual for future use. Safety Precautions The following symbols are used to clas-

sify and describe the type of instruc-

tions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert us-

ers to a specific operating pro-

cedure that must be followed in order to operate the unit safety. DANGER Precautions on the Battery Pack Electrolyte leakage, generation of heat, ignition or rupture of the Bat-

tery Pack may result. nDo Not Throw the Battery Pack into a Fire or Expose It to Excessive Heat nDo Not Deform, Disassem-

ble, or Modify the Battery Pack nDo Not Short the Positive

(+) and Negative (-) Con-

tacts Do not place the battery pack together with articles such as necklaces or hairpins when carrying or storing. t s r i F e M d a e R To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disre-

garded and improper use is performed. DANGER Denotes a potential hazard that will result in serious injury or death. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury. NOTICE Denotes a hazard that could result in property damage. 2 DANGER Precautions on the Battery Pack nDo Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. If this product is subjected to a strong impact, remove the battery pack from the computer immediately. nDo Not Charge the Battery Using Methods Other Than Those Specified nDo Not Use the Battery Pack with Any Other Prod-

uct The battery pack is re-

chargeable and was in-

tended for the specified product. nDo Not Use This Product with a Battery Pack Other Than the One Specified Use only the specified battery pack with your product. nDo Not Use Battery Pack If Wet nWhen the Battery Pack Has Deteriorated or If Abnomal Swelling Occur, Replace It With a New One Do not continue to use a damaged battery pack. nIf a Malfunction or Trouble Occurs, Immediately Stop Use If the battery pack ap-

pears to be damaged or deformed, or if it emits smoke, abnormal odor, excessive heat, or other abnormality, remove it from the computer immediately. nAvoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) t s r i F e M d a e R 3 WARNING

<Only for model with Built-in Bridge Battery>

Generation of heat, ignition or rup-

ture of the Built-in Bridge Battery may result. nDo Not Throw This Product Into a Fire or Expose It to Excessive Heat nDo Not Deform Disassem-

ble, or Modify This Procuct nDo Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. nDo Not Charge the Built-in Bridge Battery Pack Using Methods Other Than Those Specified nAvoid Extreme Heat (Near the Fire, In Direct Sunlight, for Example) nWhen the Built-in Bridge Battery Pack Has Deterio-

rated or If Abnormal Swell-

ing Occur, Contact Your Technical Support Office to Replace the Battery t s r i F e M d a e R Safety Precautions DANGER Precautions on the Built-in Bridge Battery (for disposal)

<Only for model with Built-in Bridge Battery>

When disposing the battery, gen-

eration of heat, ignition or rupture of the Built-in Bridge Battery may result. ( Operating Instructions -

Reference Manual) Handling This Computer nDo Not Disassemble the Computer Except When Disposing of It Handling the Built-in Bridge Battery nDo Not Short the Positive

(+) and Negative (-) Con-

tacts nDo Not Throw the Battery into a Fire or Expose It to Excessive Heat nDo Not Apply Shocks to the Built-in Bridge Battery by Dropping It, Applying Strong Pressure to It, etc. nDo Not Charge nDo Not Use nDo Not Deform, Disassem-

ble, or Modify the Built-in Bridge Battery Pack nAvoid Extreme Heat (Near the Fire, in Direct Sunlight, for Example) 4 WARNING Fire or electric shock may result. nDo Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Do not continue to use a damaged AC cord, AC plug and AC adaptor. Contact your technical support office for repair. nDo Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet Connecting to a DC/AC converter (inverter) may damage the AC adap-

tor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifically approved for such use. nDo Not Pull or Insert the AC Plug If Your Hands Are Wet nDo Not Disassemble This Product No user serviceable parts inside this unit. Refer servic-

ing to qualifiied technician. nDo Not Touch This Product In a Thunderstorm If Con-

nected with the AC Cable or Any Other Cables nIf a Malfunction or Trouble Occurs, Immediately Stop Use If the Following Malfunc-

tion Occurs, Immediately Unplug the AC Plug and the Battery Pack This product is damaged Foreign object inside this product Smoke emitted Unusual smell emitted Unusually hot After the above procedure, contact your technical sup-

port office for repair. n Clean Dust and Other Debris of the AC Plug Regularly If dust or other debris ac-

cumulates on the plug, humidity, etc. may cause a defect in the insulation. nInsert the AC Plug Com-

pletely Do not use a damaged plug or loose AC outlet. nClose the Connector Cover Tightly When Us-

ing This Product Where Is a Lot of Water, Moisture, Steam, Dust, Oily Vapors, etc. If foreign matter has found its way inside, immediate-

ly turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support office. 5 t s r i F e M d a e R Detrimental health effects on your body may result. nDo Not Turn the Volume Up To Loud When Using Head-

phones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hear-

ing.

<Only for model with wireless WAN>

nDo Not Leave a microSIM Card within Reach of In-

fants. In case of swallowing, con-

sult a doctor immediately. Safety Precautions WARNING nTurn the power off be-

forehand when entering locations, such as a gas station where inflammable gases are generated Such gases may be ignited. WARNING Burns or low-temperature burns may result. nDo Not Use This Product in Close Contact With Your Body For a Long Period of Time Do not use this product with its heat-emitting parts in close contact with your body for a long period of time. Low-temperature burns may result. nDo Not Touch The Surface of The AC Adaptor Contin-

uously While Using/Charg-

ing Burns may result. nDo Not Place the Product in a Bag or Case While It is Turned On Doing so may cause the product to overheat and result in burns. t s r i F e M d a e R 6 nKeep This Product at Least 15 cm Away from the Po-

sition of an Implantable Pacemaker The operation of a pace-

maker may be affected.

*1 If use of the unit in such situations cannot be avoided, press the USER button for 1 second or longer to start the dashboard, and tap and enable

[Airplane Mode]. However, be aware that use of computers is prohibited even with their wireless functional-

ity turned off in some cases, such as during takeoff and landing.

*2 CCU is an abbreviated term of Coro-

nary Care Unit. WARNING Radio waves transmitted from this product may affect the surrounding area. nDo Not Use This Product near Automatic Control De-

vices, Such As Automatic Doors And Fire Alarms Automatic control devices may malfunction, resulting in accidents. nTurn the Power Off on an Airplane *1 For use on a plane, follow the airlines instructions. The safety of navigation may be compromised. nTurn the Power Off in Hospitals or at Locations Where Medical Equipment is Present *1 Do not bring this prod-

uct into operating rooms, intensive care units, CCU, etc. *2 Medical electrical equip-

ment may be affected, and malfunction may occur, resulting in accidents. nTurn the Power Off in Crowded Locations, Such As a Crowded Train, Where There May Be a Person with a Cardiac Pacemaker The operation of a pace-

maker may be affected. t s r i F e M d a e R 7 nDo Not Leave This Product in High Temperature Envi-

ronment for a Long Period of Time Leaving this product where it will be exposed to ex-

tremely high temperatures such as near fire or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. nHold the Plug When Un-

plugging the AC Plug nUse Only the Specified AC Adaptor With This Product Do not use an AC adaptor other than the one sup-

plied (supplied with the unit or one sold separately as an accessory). This product may fall over or drop, resulting in an injury. nDo Not Place This Product on Unstable Surfaces nAvoid Stacking Safety Precautions CAUTION Fire or electric shock may result. nDo Not Move This Product While the AC Plug Is Con-

nected If the AC cord is damaged, unplug the AC plug imme-

diately. nDo Not Subject the AC Adaptor To Any Strong Impact Do not continue to use the AC adaptor after a strong impact such as being dropped. Contact your technical support office for repair.

<Only for model with LAN>

nDo Not Connect a Tele-

phone Line, or a Network Cable Other Than the One Specified, Into the LAN Port Do not connect to a net-

work such as the ones listed below. Networks other than 100BASE-TX or 10BASE-T Phone lines (IP phone

(Internet Protocol Tele-

phone), Telephone lines, internal phone lines (on-

premise switches), digital public phones, etc.) t s r i F e M d a e R 8 CAUTION Detrimental health effects on your body may result. nTake a Break Of 10-15 Min-

utes Every Hour Using this product for long periods of time may have detrimental health effects on the eyes or hands. Burns, low-temperature burns, or frostbite may result. nDo Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment When it is necessary to expose the skin to this product such as to scan a fingerprint, perform the operation in the shortest time possible. NOTICE l Do not place the computer near a television or radio receiver. l Keep the computer away from magnets. Data stored on the flash memory may be lost. l This computer is not intended for the display of images for use in medical diagnosis. l This computer is not intended for a use with connection of medical equipment for the purpose of medi-

cal diagnosis. l Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product. l Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. l Do not expose the battery pack to water, or allow it to become wet. l If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40%

and store it in a cool, dry place. l This computer prevents overcharg-

ing of the battery by recharging only when the remaining power is less than approx. 95% of capacity. l The battery pack is not charged when the computer is first pur-

chased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automat-

ically. 9 t s r i F e M d a e R l When transporting a spare battery inside a package, briefcase, etc., it is recommended that it be placed in a plastic bag so that its contacts are protected. l Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will exhaust the remaining battery capacity. l <Only for model with Built-in Bridge Battery>

To minimize deterioration of the built-in bridge battery, connect the computer to the AC adaptor and re-

charge it for approximately 2 hours about once every year. Safety Precautions l Should the battery leak and the fluid get into your eyes, do not rub your eyes. Immediately flush your eyes with clear water and see a doctor for medical treatment as soon as possible. NOTE l The battery pack may become warm during recharging or normal use. This is completely normal. l Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 C to 50 C

{32 F to 122 F}). (

Operat-

ing Instructions - Reference Manual Battery Power) Once the allow-

able range requirement is satis-

fied, charging begins automatically. Note that the recharging time var-

ies based on the usage conditions.

(Recharging takes longer than usual when the temperature is 10 C {50 F} or below.) l If the temperature is low, the operat-

ing time is shortened. Only use the computer within the allowable tem-

perature range. l The battery pack is a consum-

able item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and repeated recharging does not restore its per-

formance, the battery pack should be replaced with a new one. t s r i F e M d a e R 10 This computer is not intended for use in medical equipment including life-

support systems, air traffic control sys-

tems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This computer has been designed so as to minimize shock to the LCD and flash memory drive, etc., but no war-

ranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling. THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NU-

CLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/

SYSTEMS, AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS*3, MEDICAL DEVICES OR ACCESSORIES*4, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSUR-

ING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPON-

SIBLE FOR ANY LIABILITY RE-

SULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

*3 AIRCRAFT COCKPIT EQUIPMENT/

SYSTEMS include Class2 Electronic Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circu-

lar) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

*4 As defined by the European Medical Device Directive (MDD) 93/42/EEC. Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g. Flammability/Smoke/Tox-

icity/Radio Frequency Emission, etc) requirements related to aviation stan-

dards that exceed the specifications of our COTS (Commercial-Off-The-Shelf) products. 11 t s r i F e M d a e R t s r i F e M d a e R 26-M-1 Regulatory Information Information to the User / Informations destines aux utilisateurs and its authorized resellers or distribu-

<Only for model with wireless LAN/

Bluetooth/wireless WAN>

tors are not liable for damage or viola-

This product and your Health tion of government regulations that This product, like other radio devices, may arise from failing to comply with emits radio frequency electromagnetic these guidelines. energy. The level of energy emitted by this product however is far much less than the electromagnetic energy emit-

ted by wireless devices like for exam-

ple mobile phones. Because this product operates within the guidelines found in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consumers. These standards and recommendations reflect the con-

sensus of the scientific community and result from deliberations of panels and committees of scientists who continu-

ally review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or respon-

sible representatives of the organiza-

tion. These situations may for example include:

l Using this product on board of air-

<Uniquement pour les modles avec rseau local sans fil et/ou Bluetooth>

Ce produit et votre sant Ce produit, comme tout autre appareil radio, met de lnergie radiolectrique. Toutefois, la quantit dnergie mise par ce produit est beaucoup moins im-

portante que lnergie radiolectrique mise par des appareils sans fil tels que les tlphones portables. Lutilisa-

tion de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opre dans les limites des directives concernant les normes et les recommendations de scurit sur les frquences radio. Ces normes et recommandations refltent le consen-

sus de la communaut scientifique et rsultent de dlibrations de jurys et comits de scientifiques qui examinent et interprtent continuellement les nou-

veauts de la vaste littrature sur les recherches effectues. Dans certaines situations ou environnements, lutilisa-

tion de ce produit peut tre restreinte par le propritaire du btiment ou par les reprsentants responsables de lor-

ganisation. Ces situations peuvent tre les suivantes par exemple :

l A bord dun avion, ou l Dans tout autre environnement o les risques dinterfrence sur dautres appareils ou services sont perus ou identifiables comme dan-

gereux. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environ-

ment (e.g. airports), you are encour-

aged to ask for authorization to use this product prior to turning on the product. Regulatory Information We are not responsible for any radio or television interference caused by un-

authorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We l In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. Si vous ntes pas sr de la rglemen-

tation applicable lutilisation dap-

pareils sans fil dans une organization planes, or 12 ou un environnement spcifique, (par exemple dans un aroport) nous vous invitons demander lautorisation dutiliser ce produit avant sa mise en marche. Informations concernant la rgle-

mentation Nous dclinons toute responsabilit pour toute interfrence radio ou tlvi-

sion cause par des modifications non autorises apportes ce produit. La correction dinterfrences causes par de telles modifications non autorises sera la seule responsabilit de son uti-

lisateur. Nousmmes, les revendeurs officiels et les distributeurs ne sommes pas responsable de tout dgt ou de toute violation des rglements de ltat pouvant dcouler du non-respect de ces directives. 26-F-1 Lithium Battery / Pile au lithium Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service per-

sonnel. Warning!

A risk of explosion from incorrect instal-

lation or misapplication may possibly occur. 15-E-1 Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines donnes, notamment la date et lheure. La pile ne doit tre rempla-

ce que par un technicien qualifi. Danger !

Risque dexplosion en cas de non res-

pect de cette mise en garde!

15-F-1 t s r i F e M d a e R About Battery Pack Battery pack model number Recommended charging condition Notice FZ-VZSU94 Series 8.4 V / 1067 mA (Constant voltage/current) Dispose of used batteries according to local ordinanc-

Do not expose this computer to temperatures greater es and/or regulations. than 60 C {140 F}. CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. ATTENTION:

Il y a risque dexplosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. 58-E-1 58-F-1 13 Regulatory Information Camera Light

<For model with rear camera>

CAUTION

- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs with naked eyes.

- User must maintain minimum 248 mm spacing between the LED and all per-

sons eyes. 57-E-1 t s r i F e M d a e R Laser Devices

<Only for model with Barcode Reader>

This equipment is using lasers that comply with US21CFR1040.10, 1040.11, EN 60825-1:2007 and IEC60825-1:2007 regulations. The laser is a Class 2 laser which is indicated on the label for this product. Class 2 laser readers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Caution-Procedures other than those specified herein may result in hazardous radiation exposure. n Labeling/Marking Location of aperture Beam Divergence

- Vertical angle: 20 degree

- Horizontal angle: 30 degree 630 - 680 nm, 1 mW MAX. 13-E-1 14 Priphriques laser

<Uniquement pour les modles quips dun Lecteur de codes barres>

Cet appareil utilise des rayons laser conformes aux rglements US21CFR1040.10, 1040.11, EN 60825-1:2007 et IEC60825-1:2007. Le laser est de Classe 2, comme ltiquette de ce produit lindique. Les lecteurs de laser de Classe 2 utilisent une diode lumineuse rayonnement visible et basse nergie. Comme cest le cas pour toutes les sources trs lu-

mineuses, comme le soleil, il est recommand lutilisateur dviter de regarder directement le faisceau. Une exposition momentane un laser de Classe 2 nest pas reconnue comme nocive. Attention-Les procdures autres que celles qui sont dtermines ici peuvent en-

traner une exposition des radiations dangereuses. n tiquettes/marques Emplacement de louverture Divergence du faisceau

- Angle vertical : 20 degrs

- Angle horizontal : 30 degrs 630 - 680 nm, 1 mW MAX. 13-F-1 15 t s r i F e M d a e R Regulatory Information Laser Devices Caution

<Only for model with the following label on the computer>

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. 12-E-1 The following label is put on the computer. Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated June 24, 2007. 130TS L1348Z

(EN)

) W W

(

1 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 LASER KLASSE 1 t s r i F e M d a e R Avertissement concernant les priphriques laser

<Uniquement pour le modle quip de ltiquette suivante sur lordinateur>

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER. LUTILISATION DE COMMANDES OU DE RGLAGES OU LEXCUTION DE PROCDURES AUTRES QUE CELLES SPCIFIES ICI PEUVENT PROVO-

QUER UNE EXPOSITION DES RADIATIONS DANGEREUSES. NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RPARER SOI-MME. CONFIER TOUT TRAVAIL DENTRETIEN UN PERSONNEL QUALIFI. 12-F-1 Ltiquette suivante se trouve sur lordinateur. 1 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 LASER KLASSE 1 Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated June 24, 2007. 130TS L1348Z

(EN)

) W W

(

16 For U.S.A. Federal Communications Commis-

sion Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radi-

ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television reception, which can be de-

termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an out-

let on a circuit different from that to which the receiver is connected. l Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party re-

sponsible for compliance could void the users authority to operate this equip-

ment. t s r i F e M d a e R FCC RF Exposure Warning:

l This equipment is provided with PC Card slot that could be used with wireless transmitters, which will be specifically recommended when they become available. Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not com-

ply with FCC RF exposure requirements.

<Only for model with wireless LAN/wire-

less WAN/Bluetooth>

l This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. l This equipment may not be col-

located or operated with any other antenna or transmitter. l This device meets the governments re-

quirements for exposure to radio waves. This device is designed and manufac-

tured not to exceed the emission limits for exposure to radio frequency (RF) en-

ergy set by the Federal Communications Commission of the U.S. Government. l The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

* Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmit-

ting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the clos-

er you are to a wireless base station antenna, the lower the power output. 25-M-9 17 Regulatory Information

<For USA and Canada>

A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lappareil que vous vous tes procur est aliment par une bat-

terie au lithium-ion. Pour des renseigne-

ments sur le recy-

clage de la batterie, veuillez composer le 1-800-8-BATTERY. 48-M-1 l This PC contains:

Model: WL16B FCC ID: ACJ9TGWL16B t s r i F e M d a e R About FCC ID Number SAR information on this product is on file with the FCC and can be found by searching for the products FCC ID Number at http://www.fcc.gov/oet/ea/fc-

cid. To find the FCC ID number for your product, first remove the battery pack from the tablet. The FCC ID number is printed on the nameplate underneath. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interfer-

ence received, including interference that may cause undesired operation. Responsible Party:

Panasonic Corporation of North America Two Riverfront Plaza Newark, NJ 07102 Support Contact:

http://www.panasonic.com/contactinfo 6-M-1 USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic web-

site: http://www.panasonic.com/environ-

mental or call 1-888-769-0149 65-M-2

<For USA-California Only>

This product contains a CR Coin Cell Lithium Battery which contains Perchlo-

rate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/

perchlorate/

38-M-1 18 For Canada / Pour le Canada Canadian ICES-3 CAN ICES-3(B) / NMB-3(B) 7-M-3

<Only for model with wireless LAN/

Bluetooth>

ISED Canada This product complies with ISED Cana-

das licence-exempt RSSs. Operation is subject to the following two conditions;

(1) this device may not cause interfer-

ence, and

(2) this device must accept any inter-

ference, including interference that may cause undesired operation of the device.

<Ne sapplique quaux modles avec technologie Bluetooth/LAN sans fil>

ISED Canada Cet quipement est conforme aux nor-

mes sans licence RSS ISED Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) ce dispositif ne peut produire de brouillage, et

(2) ce dispositif doit accepter le brouilla-

ge, y compris le brouillage pouvant entraner le fonctionnement non dsir de lappareil. 30-Ca-1-1

<Only for model with wireless LAN>

This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satel-

lite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-

5850 MHz and these radars could cause interference and/or damage to LELAN devices.

<Ne sapplique quaux modles avec technologie LAN sans fil>

Cet appareil (pour rseaux locaux radiolectriques) dans les bandes de frquences 5150-5250 MHz est rser-

v une utilization lintrieur afin de rduire le risque dinterfrence avec les systmes satellites mobiles bicanaux. Les radars forte puissance sont dsi-

gns comme tant les premiers utili-

sateurs (cest--dire quils ont la prio-

rit) des bandes de frquences 5250-

5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer des interfrences et/ou des dommages ce priphrique. 30-Ca-2-1

<Only for model with wireless LAN/

wireless WAN/Bluetooth>

l This computer complies with ISED Canada radiation exposure limits set forth for an uncontrolled environ-

ment. l This PC with WLAN and/or Bluetooth transmitters installed, has been approved for portable opera-

tion and does not require any mini-

mum spacing be provided between antennas and all persons body.

<Ne sapplique quaux modles avec technologie Bluetooth/LAN sans fil/

WAN sans fil>

l Cet quipement est conforme aux limites dexposition aux rayonne-

ments ISED Canada tablies pour un environnement non contrl. l Ce PC avec metteurs WLAN et/ou Bluetooth a t approuv des fins dopration mobile; aucun espace minimum entre les antennes et le corps de lutilisateur nest requis. 25-Ca 19 t s r i F e M d a e R t s r i F e M d a e R Regulatory Information FOR USE WITH MODEL NO. :

CF-AA6373A POUR UTILISER AVEC MODLE :

CF-AA6373A 20-Ca-1 20 For U.S.A and Canada For Used in Motor Vehicle / Pour Lutilisation Dans Un Vhicule Motoris Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle informa-

tion, system control, rear or side observation and navigation. If used for entertain-

ment purpose, such as television reception or video play, it must be installed to the rear of the drivers seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to deter-

mine lawful use of this product while operating within a motor vehicle. Avertissement : Lordinateur bloc-notes peut tre install dans un vhicule mo-

toris et dans le champ de vision du conducteur uniquement en tant que dispositif daide aux fonctions du vhicule, comme par exemple pour fournir des informa-

tions sur le vhicule, comme dispositif de contrle de systme, pour lobservation larrire ou sur les cts du vhicule, ainsi que pour fournir de linformation routire. Pour toute utilisation fin de divertissement, comme par exemple pour regarder la tlvision ou jouer des jeux vido, il doit tre install larrire du sige du conducteur, en un emplacement o il ne sera pas visible, ni directe-

ment ni indirectement, pour le conducteur du vhicule motoris. Vrifiez les lois fdrales et nationales qui rgissent lutilisation lgale de cet appareil lintrieur dun vhicule motoris. 35-M-1 For Australia For Used in Motor Vehicle Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle infor-

mation, system control, rear or side observation and navigation. If the Notebook Computer is to be used for work or entertainment purposes, such as television reception, video play or other work programs, it must be installed in a position where it will NOT:

(a) be visible, directly or indirectly, to the operator of the motor vehicle; or

(b) cause distraction to drivers of other motor vehicles. Check with individual state laws to determine lawful use of this product while oper-

ating within a motor vehicle. If the visual display unit is, or is part of, a drivers aid, above rule is not applied. Drivers aid includes closed-circuit television security cameras, dispatch systems, navigational or intelligent highway and vehicle sys-

tem equipment, rear view screens, ticket-issuing machines and vehicle monitoring devices. 35-A-1 21 t s r i F e M d a e R t s r i F e M d a e R Regulatory Information For India Declaration of Conformity with the requirements of the e-waste (Management and Handling) Rules, 2011. (adopted by Notification S.O.1035(E) of Ministry of Envi-

ronment and Forests) The Product is in conformity with the requirements of Rule 13 of the e-waste Rules. The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the e-waste Rules:

1. Lead (Pb) - not over 0.1% by weight;

2. Cadmium (Cd) - not over 0.01% by weight;

3. Mercury (Hg) - not over 0.1% by weight;

4. Hexavalent chromium (Cr6+) - not over 0.1% by weight;

5. Polybrominated biphenyls (PBBs) - not over 0.1% by weight;

6. Polybrominated diphenyl ethers (PBDEs) - not over 0.1% by weight. For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, regis-

tered dismantler or recycler, or Panasonic service center when dispos-

ing of this product. Please see the Panasonic website for further information on collection centers, etc. http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-

program.html 68-M-2 22 Introduction Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions carefully. l Some illustrations are simplified to help your understanding and may look dif-

l If you do not sign in as an administrator, you cannot use some functions or ferent from the actual unit. cannot display some screens. l Refer for the latest information about optional products to the catalogs, etc. l Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language prefer-

ence.) n Disclaimer Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or in-

directly from errors, omissions or discrepancies between the computer and the manuals. n Trademarks Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation of the United States and/or other countries. Names of products, brands, etc., appearing in this manual are trademarks or reg-

istered trademarks of their respective own companies. d e t r a t S g n i t t e G 23 First-time Operation n Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact Panasonic Technical Support. AC Adaptor . 1 AC Cord . 1 Battery Pack . 1 Model No: CF-AA6373A Soft Cloth . 1 Stylus*1 . 1 Tether*1 . 1 Hand Strap*1 . 1 OPERATING INSTRUCTIONS (This book) . 1

*1 Not included with some models. Model No: FZ-VZSU94W 1

1 Inserting the Battery Pack. Turn over the computer and insert the battery pack until it touch to the secured position. l Make sure no foreign objects are under the computer. CAUTION l Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer. l Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. d e t r a t S g n i t t e G 24 2 2 Connect your computer to a power out-

let.

3 A B The battery charging starts automatically. CAUTION l Do not disconnect the AC adaptor until the first-time operation procedure is completed. l When using the computer for the first time, do not con-

nect any peripheral device (including wired LAN cable) except the battery pack and AC adaptor. l Handling the AC adaptor Problems such as sudden voltage drops may arise dur-

ing periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. Turn on the computer. 3 Press the power switch

(B) lights.

(A) until the power indicator CAUTION l Do not press the power switch repeatedly or do not hold the power switch for four seconds or longer. l Any changes from the default setting of the Setup Util-

ity must not be made until the First-time Operation is completed. d e t r a t S g n i t t e G 25 First-time Operation 4 Setup Windows. Follow the on-screen instructions. l The computer restarts several times. Do not touch the screen or tablet buttons, and wait until the drive indicator has turned off. l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears. l Setup of Windows will take approximately Go to the next step, confirming each message on 5 minutes. the display. l You can set the Wireless Network after the setup of If Lets get connected is displayed, you can select Windows is complete. Skip this step. CAUTION l Set the monitor to landscape orientation to perform Windows setup when using the computer for the first time or after reinstalling Windows. If Windows setup is performed with the monitor in por-

trait orientation, part of the screen may be hidden and not displayed. l You can change the user name, password, image and security setting after setup of Windows. l Remember your password. If you forget the password, you cannot use Windows. Creating a password reset disk beforehand is recommended. l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, &, space. 5 Restart the computer A Touch B Touch l A portion of the Panasonic PC Settings Utility func-

(Start).

(Power) - [Restart]. tions will be enabled after the computer restarts. d e t r a t S g n i t t e G 26 6 Update the on-screen manual A Connect to the internet. Sign in to Windows as an administrator. For further information, refer to network. Connect to a B Update the on-screen manual. Double-touch the [Panasonic PC Settings Utility]

on the desktop screen, and then touch [Support] -

[Manual] - [Launch Manual Selector]. Follow the on-screen instructions. 7 Create the recovery disc. A recovery disc allows you to install OS and restore its factory default condition, in case, for example, the recovery partition of the flash memory is damaged. We recommend creating a recovery disc before you begin using the computer. Refer to Creation Utility about creating the disc. Reference Manual Recovery Disc 8 Update OS version Following the policy guidelines of Microsoft Corpora-

tion, Panasonic is updating the installed version to the latest version during repairs. For more details about version update and related information, please visit the following website:

http://pc-dl.panasonic.co.jp/itn/addendum/

d e t r a t S g n i t t e G NOTE l PC Information Viewer This computer periodically records the management information of the flash memory, etc. The maximum data volume for each record is 1024 bytes. This information is only used for estimating the cause in the case when the flash memory goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above. To disable the function, add the check mark for [Disable the automatic save function for management information history] in [Hard Disk Status] of PC Infor-

mation Viewer, and click [OK]. Then follow the on-screen instructions.

(

the Computers Usage Status) Operating Instructions - Reference Manual Troubleshooting Checking 27 As an ENERGY STAR Partner, Panasonic Corporation has determined that this product meets ENERGY STAR guidelines for energy efficiency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy.

<For U.S.A.>

To learn more about power management, please visit the web site:

www.energystar.gov/index.cfm?c=power_mgt.pr_power_management Outline of the International ENERGY STAR Office Equipment Program The international ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.

<For U.S.A.>

For information about ENERGY STAR , refer to the following web site:

Web Site: www.energystar.gov 22-M-1 Panasonic Corporation Osaka, Japan Panasonic System Communications Company of North America Two Riverfront Plaza, Newark NJ 07102 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Panasonic Australia Pty. Limited ACN 001 592 187 ABN 83 001 592 187 1 Innovation Road, Macquarie Park NSW 2113 Web Site : https://panasonic.net/cns/pc/

Panasonic Corporation 2018 Printed in Taiwan PS0218-0 DHQX1467ZA/T1

Personal Computer Model No. FZ-M1 Series Connect to a network Disclaimer Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Refer for the latest information about optional products to the catalogs, etc. Trademarks Microsoft, Windows, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation of the United States and/or other countries. Intel, Core, and PROSet are either registered trademarks or trademarks of Intel Corporation. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective own companies. PS0218-0 20170420ZAP Introduction Illustrations and Terminology in this manual This manual explains using the default setting. Windows 10 Pro as Windows or Windows 10 Terms and illustrations in these instructions. Enter: This means to press the Enter key. Ctrl +F7: This means to press and hold Ctrl key, and then pressF7 key.

<Only when connected to the external keyboard>

The display of the key may be different from this manual according to the keyboard used. (e.g. Delete instead of Del)

-

:

Touch

(Start) and then touch

(Power). Some illustrations and display examples may look different from the actual product. Some types of software are automatically updated, and differences may occur from descriptions in this manual. Tablet mode and Desktop mode Windows 10 offers the tablet mode optimized for the touch panel operation, and also the desktop mode in which operation is performed using the keyboard and touch panel. The mode can be switched by touching

(Notification), and then touching

(Tablet mode) tile. N O T E If some icons do not appear on the task bar, perform the following operations. 1. Touch and hold the task bar. 2. Select the item to display. Regarding Windows 10 Screen Messages Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference) Displaying Apps 1. Touch

(All apps). Alternatively, touch

(Start) at the bottom left corner in the desktop mode. Opening the Settings screen 1. Touch

(Settings). Alternatively, touch

(Start) -

(Settings) in the desktop mode. Opening the Control Panel On the Start screen, proceed as follows. 1. Touch

(All apps) - [Windows System] - [Control Panel]. Alternatively, touch

(Start) - [Windows System] - [Control Panel] in the desktop mode. Notification area The notification area is on the right side of the screen. To display the notification, touch

(Notification) on the task tray. LAN

<Only for model with LAN>

Connecting LAN CAUTION Do not connect the telephone cable to the LAN port. 1. Turn off the computer. Do not use sleep or hibernation. 2. Connect the cable. Connect the LAN port (A) and the network system (e.g., server, hub) using a LAN cable. 3. Turn on the computer. Disabling/Enabling Wireless Communication

<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>

There are several ways of disabling and enabling wireless communication. Using airplane mode Setting [Wireless Configuration] in the [Advanced] menu of the Setup Utility Settings in the Network and Sharing Center (

Using the Wireless LAN Function) N O T E For further information about Wireless LAN. For further information about Bluetooth. For further information about Wireless WAN. Using airplane mode*1

(For wireless LAN, wireless WAN, Bluetooth, and GPS) 1. Touch

(Settings) - [Network & Internet] - [Airplane mode]*1. Alternatively, touch

(Start) -

(Settings) - [Network & Internet] - [Airplane mode]*1 in the desktop mode. 2. To disable wireless communications, set [Airplane mode]*1 to [On]. To enable wireless communications, set [Airplane mode]*1 to [Off], and then;

set [Cellular] to [On] (for wireless WAN). set [Wi-Fi]*1 to [On] (for wireless LAN). set [GPS] to [On] (for wireless WAN). set [Bluetooth] to [On] (for Bluetooth). set [GPS/GNSS] to [On] (for GPS).

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode]/[WiFi] may be displayed instead of [Airplane mode]/[Wi-Fi] in some language preference.) Wireless LAN

<Only for model with wireless LAN>

CAUTION Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may affect devices. Follow the instructions of airline companies and hospitals. If you use the computer in these locations, turn off the wireless LAN. To avoid unauthorized access to the computer through wireless LAN We recommend you to make security settings such as encryption before using wireless LAN. Otherwise the disk data such as the shared files can be exposed to the risk of unauthorized access. N O T E Communication is established through the wireless LAN antenna (A). Do not block the antenna area with your hand or body. The transmission rate will be lower when a microwave oven is used near by. To use wireless LAN, set [Wireless LAN] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility. Using the Wireless LAN Function Before using a wireless LAN, turn the wireless LAN communication on. Turning on/off the wireless LAN communication 1. To enable the wireless communication (

Disabling/Enabling Wireless Communication). Setting the wireless LAN access point Preparation Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer. 1. Turn the wireless LAN on. 2. Touch or on the task tray. 3. Select an access point, and touch [Connect]. 4. Input the key you set for the access point to recognize the computer, and touch [Next]. Wait for the computer to connect to the wireless LAN access point. When the icon on the notification area is changed to

, the wireless LAN setting is complete. N O T E The settings depend on the network environment. For further information, ask the system administrator or the person in charge of the network. If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless LAN access point, take the following procedure. If you do not perform the procedure below, you may not be able to access the wireless LAN access point automatically or the wireless LAN access point may not be displayed. 1. Touch on the task tray, and then touch [Hidden network]. 2. Touch[Connect], enter the necessary information such as the network name (SSID), and touch [Next]. For further information, ask the system administrator or the person in charge of the network. Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a) 1. Touch

(Panasonic PC Settings Utility) -

(Settings) -

(Network). Alternatively, touch desktop mode.

(Start) -

(Panasonic PC Settings Utility) -

(Settings) -

(Network) in the 2. Touch [Enabled] or [Disabled] for the wireless LAN IEEE802.11a. N O T E In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law. If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connection will be temporarily interrupted. Bluetooth

<Only for model with Bluetooth>

You can access internet and other Bluetooth devices without connecting cables. N O T E Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body. To use Bluetooth, set [Bluetooth] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility. The transmission rate will be lower when a microwave oven is used near by. When you uninstall the Bluetooth Driver, turn Bluetooth off. Using the Bluetooth Function Before using a Bluetooth, turn the Bluetooth communication on. Turning on/off the Bluetooth communication 1. To enable the wireless communication (

Disabling/Enabling Wireless Communication). 2. Touch

(Settings) - [Network & Internet] - [Airplane mode]*1 to [Off]. Alternatively, touch

(Start) -

(Settings) - [Network & Internet] - [Airplane mode]*1 to [Off] in the desktop mode. 3. To turn off the Bluetooth communications, set [Bluetooth] to [Off]. To turn on the Bluetooth communications, set [Bluetooth] to [On], and then;

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.) To check the Bluetooth communication status 1. Touch

(Settings) - [Devices] - [Bluetooth]. Alternatively, touch

(Start) -

(Settings) - [Devices] - [Bluetooth] in the desktop mode. N O T E You can also touching on the task tray, and then touch

(Bluetooth) - [Show Bluetooth Devices] to check the communication status. Wireless WAN

<Only for model with wireless WAN>

This computer is equipped with the Wireless WAN enabling you to communicate using radio frequencies. N O T E Communication is established through the Wireless WAN antenna (A). Do not block the antenna area with your hand or body. To use wireless WAN, set [Wireless WAN] of [Wireless Configuration] to [Enabled] (default) in the

[Advanced] menu of the Setup Utility. Before the computer enters sleep or hibernation, cut the Wireless WAN communication. Entering sleep or hibernation without cutting the connection may disable communication after resuming. In this case, restart the computer. If Device driver software was not successfully installed (or a similar message) appears when starting the computer or resuming from sleep or hibernation. When communication works normally, Wireless WAN is operating correctly. If communication fails, the device may not be recognized correctly. In this case, restart the computer. Do not use the microSIM card adapter. Do not insert microSIM cards on which labels or stickers are affixed. Failure to obey may result in malfunction. Inserting/Removing a microSIM Card Before using the Wireless WAN, set a microSIM card to the microSIM card slot. CAUTION Be sure to turn off the computer before inserting or removing the microSIM card. To insert a microSIM card 1. Turn off the computer. 2. Disconnect the AC adaptor, remove the battery pack. (

Remove the Battery Pack) 3. Open the cover (A). 4. Insert the microSIM card into the microSIM card slot (B) with the contact side facing downward and with the cut corner oriented as shown in the illustration. CAUTION Do not insert the microSIM card upside down. 5. Close the microSIM card slot cover. If the cover is not closed, the microSIM card may jump out when the computer falls. 6. Insert the battery pack and connect the AC adaptor. To remove a microSIM card 1. Turn off the computer. 2. Disconnect the AC adaptor, remove the battery pack. (

Remove the Battery Pack) 3. Push the card. It will come out of the slot a little bit. 4. Pull the card all the way out. 5. Close the microSIM card slot cover. 6. Insert the battery pack and connect the AC adaptor. Connecting to a network 1. Touch

(Settings) - [Network & Internet] - [Cellular]. Alternatively, touch

(Start) -

(Settings) - [Network & Internet] - [Cellular] in the desktop mode. 2. Touch Cellular. 3. Touch [Advanced options]. If an APN is not displayed under Internet APN:

1. Touch [Add an APN]. 2. Input detailed information such as APN, and then touch [Save]. 3. Touch [OK]. You are connected to the Internet. 4. Touch arrow upper left (return to previous page). 5. If you are not connected to the Internet, select created APN profile, and then touch [Apply]. N O T E When Use cellular instead of Wi-Fi is set to [When Wi-Fi is poor] (default), wireless WAN connections will be established only when there is no Internet connection via Wi-Fi. Disconnecting to a network 1. Touch

(Settings) - [Network & Internet] - [Cellular], and then touch connected ISP.

(Start) -

(Settings) - [Network & Internet] - [Cellular] in the desktop mode, and then Alternatively, touch touch connected ISP. N O T E You can also touch on the task tray, and then touch the connected ISP to display the connected ISP screen. 2. Touch [Disconnect]. Troubleshooting (Advanced) Refer to the following instructions when a problem occurs. If the remedies indicated in the chart do not solve the problem, contact Panasonic Technical Support. For a software problem, refer to the instruction manual of the software. Network

<Only for model with LAN>

Cannot connect to a network.

<Only when using the Cradle with LAN>

Cannot connect to a network. Cannot check the computer's MAC address. Set the device [Extension Port] to [Enabled] in the [Advanced] menu of the Setup Utility. Set [Cradle USB Port] to [Enabled] in the [Advanced] menu of the Setup Utility. Follow the steps below. 1. Touch

(All apps) - [Windows System] - [Command Prompt]. Alternatively, touch Prompt] in the desktop mode. Input getmac /fo list /v, and pressEnter.

(Start) - [Windows System] - [Command Insert a space between fo and list, and between list and

/v. The MAC address of each device appears. The MAC addresses are the 12 alphanumeric characters that appear in the Physical Address rows of each of the items. The names of each of the devices are as follows. Device Wireless WAN Wireless LAN

<Only for model with LAN>

LAN Connection Name Cellular Wi-Fi (WLAN) Ethernet Bluetooth

* The content displayed will vary depending on the device and model. Bluetooth Network Connection Input exit, and pressEnter. 2. 3. Wireless Communication (only for model with wireless LAN/Bluetooth/wireless WAN) Cannot connect to a network. Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) of [Wireless Configuration] to [Enabled] in the [Advanced] menu of the Setup Utility (

Wireless Configuration). Confirm the airplane mode is Off. To turn off the airplane mode, follow the steps below. 1. Touch

(Settings) - [Network & Internet] - [Airplane mode]. Alternatively, touch Internet] - [Airplane mode] in the desktop mode.

(Start) -

(Settings) - [Network &

2. Touch [Airplane mode] to [Off], and then;

set [Cellular] to [On] (for wireless WAN). set [Wi-Fi]*1 to [On] (for wireless LAN). set [GPS] to [On] (for wireless WAN). set [Bluetooth] to [On] (for Bluetooth). set [GPS/GNSS] to [On] (for GPS). Access point is not detected.

<Only for model with wireless WAN>

Cannot communicate.

<When using the GPS function on the model with the built-in Wireless WAN modem>

COM port number setting is requested when trying to use the GPS function. Restart the computer. Shorten the distance between the computer and the access point, and try the detection again. Confirm the following settings:

[Wireless LAN] in the [Advanced] menu of the Setup Utility Confirm that [Wireless LAN] of [Wireless Configuration] is set to

[Enabled]. Airplane mode Confirm that Wireless LAN ([Wi-Fi]) is [On]. This computer uses channels 1 through 11*2 to [On] when using IEEE802.11b/g/n. Check the channel being used by the access point. Confirm the following settings:

[Wireless WAN] in the [Advanced] menu of the Setup Utility Confirm that [Wireless WAN] of [Wireless Configuration] is set to

[Enabled]. Airplane mode Confirm that Wireless WAN (Cellular) is [On]. Confirm that the microSIM card is inserted correctly. If communication is not established after proceeding with the above remedies, the wireless WAN device may not be correctly recognized. Restart the computer. To use a COM port, follow the steps below. 1. Uninstall Sierra Wireless Mobile Broadband Driver Package. 1. Touch

(Settings) - [Apps]. 2. Touch [Sierra Wireless Mobile Broadband Driver Package], and then touch [Uninstall]. Alternatively, touch the desktop mode.

(Start) -

(Settings) - [Apps] in 3. Touch [Sierra Wireless Mobile Broadband Driver Package], and then touch [Uninstall]. 4. Touch [Uninstall]. 2. Restart the computer. 3. Touch and hold

(Start) - [Run], and then input C:\util\drivers\wwan_xx\Port_install.bat in [Open:], and touch [OK].

(xx will vary depending on the model.) 4. Confirm that Sierra Wireless NMEA Port(COMx) is displayed, open the device manager, and then touch [Ports(COM & LPT)]. Specify COMx as the COM port number.

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Flight mode]/[WiFi] may be displayed instead of [Airplane mode]/[Wi-Fi] in some language preference.)

*2 : In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A Channel refers to the individual frequency bandwidth divisions. Setup Utility You can make the settings of the computer's operating environment (password settings, startup drive selection, etc.) Starting the Setup Utility 1. Touch

(Settings) - [Update & security] - [Recovery]. Alternatively, touch

(Start) -

(Settings) - [Update & security] - [Recovery] in the desktop mode. 2. Touch [Restart now] under Advanced startup*1.

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example, [Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.) 3. Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart]. The computer restarts, and the Setup Utility screen appears. When [Enter Password] is displayed, enter your password. When you start the Setup Utility with Supervisor Password You can make the settings of all items of the Setup Utility. When you start the Setup Utility with User Password Note the following:

In the [Advanced] and [Boot] menus, you cannot make the settings of all items. In the [Security] menu, you can change only the User Password when [User Password Protection] is set to [No Protection]. You cannot delete the User Password. In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override]. F9 (Setup Defaults) does not function. To set Setup Utility, alternatively you can use pen input and touch input. Using touch screen:

Double-touch the setting value to be changed, select the new value, and touch it again. Using on-screen keyboard:

To input characters and symbols, touch keyboard. at the upper right corner of the Setup Utility screen to display the on-screen To operate special keys such as a function key, touch [SYM] on the on-screen keyboard so that the key is highlighted as illustrated below. The Tablet buttons operates at follows.

- side of

(move to the item below)

+ side of

: (move to the item right)

: Enter (select) N O T E Setup Utility screen is displayed on the internal LCD even when an external display is connected to the computer as the factory default. Windows 10 supports UEFI boot. Advanced Menu Peripheral Configuration Wireless Configuration The sub-menu appears when this item is selected. Sub-menu (Wireless Configuration) Wireless LAN Only for model with wireless LAN Wireless WAN Only for model with wireless WAN Bluetooth Only for model with Bluetooth Underlined items are the factory presets. Enters the sub-menu. Disabled Enabled Disabled Enabled Disabled Enabled Battery Power Remove the Battery Pack CAUTION Use only the specified battery pack with your computer. Turn off the computer. In sleep, do not remove the battery pack. Otherwise your data will be lost and the computer may be damaged. The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time. Charging starts automatically when the AC adaptor is connected to the computer. Insert the Battery Pack CAUTION Use only the specified battery pack with your computer. Turn off the computer. The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time. Charging starts automatically when the AC adaptor is connected to the computer. Make sure the latch is securely locked, otherwise the battery pack may fall when you carry the computer. Do not remove the battery pack forcibly when the latches are locked. Doing so may damage the battery pack. Replacing the Battery Pack The battery pack is a consumable item so the replacement will be necessary. If the battery operation time becomes noticeably short and not recovered even after recalibrating the battery, replace with a new battery. CAUTION The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time. Charging starts automatically when the AC adaptor is connected to the computer. Use only the specified battery pack with your computer. Make sure no foreign objects are under the computer. N O T E

<Only for model with built-in bridge battery>

If the built-in bridge battery has enough remaining power, you can replace the battery pack without turning off the computer (Hot swap) and during sleeping the computer (Warm swap). 1. Turn off the computer. Do not use the sleep function. 2. Turn your computer over and remove/insert the battery pack. To remove Push and slide the latch to the unlocked position, and raise the battery pack.

<Only for model with Built-in Bridge Battery>

Confirm that the battery indicator on the rear of the computer lights green; this means that the built-in bridge battery has enough remaining power required for a hot swap. When the battery indicator on the rear of the computer doesn't light; Shutdown, Hibernation and while the AC adaptor is connected to the computer. CAUTION In the case of a hot swap, finish replacing the battery within a minute. Depending on the built-in bridge battery status, the computer may enter hibernation within one minute. Replace the battery pack as soon as possible. If you start a hot swap with the AC adaptor connected, do not disconnect the AC adaptor until the battery pack has been replaced. If you unplug the AC adaptor, even if Built-in Bridge Battery is charged, the computer will turn off. To insert Close the battery pack until it touch to the secured position. Be careful about the battery pack direction. In case that the projection does not match the dents of the computer, detach the battery pack once, then slide it while pushing it lightly to avoid floating. CAUTION

<Only for model with Built-in Bridge Battery>

If the built-in bridge battery has not enough remaining power, you cannot replace the battery pack without turning off the computer. Turn off your computer before replacing the battery pack. Make sure the latch is securely locked, otherwise the battery pack may fall when you carry the computer. Do not remove the battery pack forcibly when the latches are locked. Doing so may damage the battery pack.

FCC ID :ACJ9TGWL16B WLAN+BT module adapter Model number: WL16B User Manual GENERAL This device is the WLAN+BT module adapter IEEE802.11a/b/g/n/ac, dual band 2x2 Wi-Fi

+Bluetooth adapter. Integration to the end product 1. WL16B module is mounted in the main board. 2. Insert Antenna unit into Antenna connectors of WL16B module. Technical Specification a) Dimensions (H x W x D):

b) Weight:

c) IEEE WLAN Standard:

d) Bluetooth:

e) Antenna Diversity:

f) Operating Temperature:

g) Humidity:

h) Host interface:

12mm x 16mm x 1.67mm 0.59g IEEE802.11a/b/g/n/ac BDR, EDR, Low energy Supported

-10 to 50 degree Celsius 30 to 80 %RH USB2.0 and PCIe v2.1 Gen1 FCC ID :ACJ9TGWL16B Regulatory Information Federal Communications Commission Radio Frequency Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment may not be collocated or operated with any other antenna or transmitter. This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

* Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. FCC ID :ACJ9TGWL16B Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 5mm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Instructions to OEM Integrators A User manual provided to the end user must indicate the operating requirements and conditions that must be observed to ensure compliance with the above-mentioned FCC RF Exposure guideline. If this module is intended for use in a portable device, integrators are responsible for separate evaluation and/or approval to satisfy FCC RF Exposure requirements. If other radio devices are to be integrated with this module, an additional evaluation and FCC submission may be required. Integrators are responsible for such additional evaluation and FCC submission. The following information must be indicated on the host device of this module;

Model : WL16B FCC ID : ACJ9TGWL16B IC : 216H-CFWL16B