Installation Manual M8 PayTablet PAX TECHNOLOGY LIMITED 1. Contents Checklist Please check the components after unpacking. If any are missing, please contact the dealer. Name M8 PayTablet AC Power Adapter USB Cable Mobile phone Card Pick-up Needle Product Manual 2. Product Description Rear-Camera 1.54 inch LCD Qty. 1 1 1 1 1 Macro Camera Flash Light NFC Reading area Touch Keypad Bottom View Audio Jack 6pin Pogo Pin Power Button Volume +
Volume -
SIM/microSD Card-Slot Front Camera Proximity Sensor Sub-MIC IC Card-Slot 8 inch LCD Touch Screen Speaker Main-MIC Type-C TOP View 3. Installation TYPE_C port: Connect USB device or PC. 6pin_Pogopin port: Connect deviceMSR/Barcode etc. TYPE-C SIM card (optional):
Pogo Pin 1 Take the Card Pick-up Needle out of the box;
2 Insert the Card Pick-up Needle into the SIM card slot;
3 Insert SIM card into the pop-up card-slot. microSD card:
1 Take the Card Pick-up Needle out of the box;
2 Insert the Card Pick-up Needle into the microSD card slot;
3 Insert microSD card into the pop-up card-slot. Nano SIM Nano SIM microSD 4. Instructions 1 Power ON/OFF Power on: press and hold the Power button for five seconds until the LCD besides, and then the terminal is being turned on. Power off: press and hold the Power button for three seconds until the shutdown menu appears, tap Shutdown > Click Shutdown, and then Shutting appears, the terminal is being turned off. 2IC card Place the chip face up, insert the IC card into the IC card slot, and push it to the end. 3Swiping contactless card Place a contactless card close to the sensor area of swiping which is at the back of the terminal. 5. Installation and Usage Tips 1Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2Forbid non-professional to repair the terminal. 3Before insert the card, please check internal and around of IC card slot. When you found some suspicious objects, must report to related administrator. Working Environment Temperature: -10~45(14~113) Storage Environment Temperature: -20~70(-4~158) R.H.:5%~96% (non-condense) R.H.:5%~96% (non-condense) 6. Important Safety Warning 1) Do not place the terminal/battery under direct sunlight, high temperature, smoke, dust, and damp environment. 2) Not allowed to place battery in fire, disassemble, drop, squeeze, or modify battery to avoid having foreign object insert and penetrate the battery, to avoid merge the battery into the liquid. External shock and pressure may cause battery liquid leak, overheat fire or explosion. Please keep battery away from children and animals to avoid injury or explosion. 3) Must stop using the battery immediately and replace with a new one if the battery expanded, bent, damaged, or overheated. 4) Recommend using the equipped power adaptor or use a3rd. party power adaptor that its specifications match the device equipped power adaptor and meets the country/local region regulations and international and regional safety standards. Non-compatible power supply, charger or battery may cause fire, explosion and other dangerous. 5) Battery charging time can not be more than 24 hours. Please charge the battery when the battery level is too low. If the battery is not being used for a long time to avoid battery over charge and discharge damage, please charge the battery once every six months. 6) Recommend replacing the battery after two-years continuous use. 7) Please dispose the device, battery, and its accessories according to the local regulations. They can not be disposed as household waste. Improper dispose the battery may cause battery explosion. 7. Icons Do not throw away, need professional recycling. Class II Equipment For indoor use only Energy Efficiency Marking AC voltage DC voltage Trademark notice:
microSD logo is a trademark of SD-3C LLC. For this device, the highest reported SAR value for usage near the body is 1.34 W/kg. The full text of the EU declaration of conformity is available at the following internet address:
https://www.pax.com.cn/ProductCE/index.aspx E-Label This device has E-Lable, Steps to access the e-label is SettingAbout phone---Regulatory labels. 1Click--Setting 2Click--About phone 3Click--Regulatory labels FCC compliance statement 4Content This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. device.
(2) This device must accept any interference, including interference that may cause undesired operation of the Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:
the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. indique. le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal;
le (s) d'antenne et l'angle (s) d'inclinaison le plus dfavorable ncessaire (s) pour rester conforme (e) au p.e. L'exigence relative au masque d'lvation nonce la section 6.2.2.3 doit tre clairement IC SAR statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. i. ii. i. ii. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Lutilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conu pour rpondre aux exigences dexposition aux ondes radio tablie par le dveloppement nergtique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification de produit utiliser lorsquil est correctement port sur le corps.