FCC ID: V5PL1400 Smart Desktop Terminal

1. Contents Checklist Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual,ect., please contact the dealer. Name L1400 AC Power Adapter AC Power cable Product Manual 2. Product Description Qty. 1 1 1 1 3.Installtion Type-C port: Connect Power or Hub Type-C port: Connect USB device. Pogopin Port: Connect ElysTablet device. 4. Instruction Power ON/OFF Power on: Press and hold the Power button (on the top) for three seconds until the main screen displays normally. Power off: Press and hold the Power button (on the top) for three seconds until the shutdown menu appears, tap Shutdown, and then shutting...appears. The terminal will be turned off after a few seconds. 5. Specification Operation System: Android 11 CPU: Qcta-core,2.0GHzprocessor Memory: 4GB RAM + 64GB Flash Memory Display: 14 inch,resolution:1920*1080, multi-touch capacitive touch screen Audio: Built-in dual speaker/Built-in dual MIC Fingerprint: Side fingerprint Camera: 5 mega-pixel auto-focusing camera Wireless Communication: Support Wi-Fi2.4/5G,Blutooth 5.0 Peripheral Ports: 2 Type-C port 1 Pogopin ports 7. Cautions of Installation and Usage 1Avoid exposing the terminal in hot, humid, dusty or strong electromagnetic environment. 2Do not violently vibrate, shake or beat the product. 3Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit. 4Do not maintain the terminal if you are non-professional Trademark notice:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PAX Technology Limited is under license. Other trademarks and trade names are those of their respective owners. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:

i. ii. i. ii. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal;

le (s) d'antenne et l'angle (s) d'inclinaison le plus dfavorable ncessaire (s) pour rester conforme (e) au p.e. L'exigence relative au masque d'lvation nonce la section 6.2.2.3 doit tre clairement indique. IC SAR statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Declaration of Change Description We,PAX Technology Limited , hereby declare that we are fully responsible for our product of FCC ID: V5PL1400, originally granted on 03/27/2022. Model Name : L1400 Brand Name: PAX The product hardware layout antenna and RF performance is exactly same with the previous version. The difference is described as following:

6 POGOPIN contacts were added to the right side position (USB signal), WiFi/Bluetooth antenna shape and position changed/optimized, a button battery seat was added to the main board, NC a UART signal seat. Thank you. Sincerely. _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Date: June 22, 2022 Subject: Request for Confidentiality FCC ID: V5PL1400 To Whom It May Concern, Pursuant to the provisions of Se requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.

(47CFR0.457, 0.459), we are Schematic Diagram Block Diagram Parts List FCC software operational description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. External Photos Internal Photos Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Power of Attorney Date: June 22, 2022 To whom it may concern, Please be notified that I, Jenna Tan, have designated Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co., Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following:

FCC ID: V5PL1400 If you have any acknowledgement and response, please send it to Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co., Ltd directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong China Date: June 22, 2022 Declaration We, PAX Technology Limited, declare that the device, FCC ID:

V5PL1400, does not support any non-US channels in all the operational mode(s). All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _______________ Jenna Tan PAX Technology Limited Tel: 86-755-86156663 Fax: 86-755-86156663 E-mail: certservice@paxsz.com