FCC ID: V5PA920PRO Smart Mobile Payment Terminal

A920Pro Wireless POS Terminal PAX TECHNOLOGY LIMITED Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual ect. please contact the dealer. 1.Contents Checklist Name Wireless POS Terminal AC Power Adapter Thermal Paper Roll Battery Cable Product Manual 2. Installation Qty. 1 1 1 1 1 1 USB port: Connect USB device or PC. SAM/SIM card:

1 Open the battery cover on the bottom of the terminal;

2 Take out the battery;

3 Insert SAM/SIM card into the corresponding SAM/SIM card slot. Micro SD card:

1 Open the battery cover on the bottom of the terminal;

2 Take out battery;

3 Insert Micro SD card into the corresponding Micro SD card slot. 3. Instruction 1) Power ON/OFF Power on: press and hold the Power button for three seconds until the LED besides the IC card slot is lighted on, and then the terminal is being turned on. Power off: press and hold the Power button for three seconds until the shutdown menu appears, tap Power off > Click Power off, and then "shutting down..."appears the terminal is being turned off. 2) Magnetic Stripe Card Place the magnetic stripe face down, swipe card through the magnetic card slot at a constant speed, which could be bi-directionally. 3) IC card Place the chip face up, insert the IC card into the IC card slot, and push it to the end. 4) Tearing off paper Tear the printing paper toward the 45 degree direction of the paper cutter. 5) Battery charging User can charge the battery with power adapter, and the charging status will be displayed on the LCD. 6) Swiping contactless card Place a contactless card close to the sensor area of swiping which is at the top of the terminal. 4. Installation and Usage Tips 1Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment. 2Forbid non-professional to repair the terminal. 3Before insert the card, please check internal and around of IC card slot. when you found some suspicious objects , must report to related administrator. 5. Lithium Ion Battery Usage Tips WARNING:

1Don't use the battery in sunlight or smoke, dust environment. 2Prohibited to strike, squeeze and tread on battery or throw it into the liquid and fire. 3If battery is impressive, deformed, damaged or exothermic seriously, please stop using immediately and replace it!

4If the continuous working time is only half of new one, the battery life may be end. Please replace it!

5Must use the specified battery model and charger, otherwise there will be explosion 6Charging time can not exceed 24 hours. If the battery is out of power, please recharge in time. Avoid damaging the battery in over-charge and over-discharge. 7If be non-use for long time, please recharge the battery per 6 months to avoid shortening its life. 8Suggest to replace it when the battery have been used for 2 years. 9Be sure to follow the instructions to dispose the wasted batteries. 10) Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 6.Icon shows Do not throw away, need professional recycling. Class II Equipment For indoor use only Energy Efficiency Marking AC voltage DC voltage 7.Caution FCC Regulations:

Hereby, PAX Computer Technology (Shenzhen) Co., Ltd. declares that the radio equipment type A920Pro is in compliance with Directive 2014/53/EU. For this device, the highest reported SAR value for usage near the body is 0.289 W/kg. The SAR limit is 2.0W/kg. The full text of the EU declaration of conformity is available at the following internet address http://www.pax.com.cn/ProductCE.aspx This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: V5PA920PRO While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. ISED Notice prsentappareilestconforme This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le Sciences etDveloppementconomique Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'en IC: 11689A-A920PRO Innovation, CNR aux ISED Radiation Exposure Statement This EUT is in compliance with SAR for general population/uncontrolled exposure limits in ISED RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. la Cetappareilestconforme populationgnrale de le dveloppementconomiqueCanadaet a ttestenconformitaveclesmthodes de mesure et procduresspcifiesdans IEC 62209.Cetappareil et saousesantennes ne doivent pas treco-localissoufonctionnerenconjonction avec tout autreantenneoutransmetteur. The device is going on be operated in 5150~5250 frequency range. It is restricted aux la norme CNR-102 science de pour linnovation et limitesd'exposition DAS IEEE 1528 et incontrle indoor environment only in Canada. PAX TECHNOLOGY LIMITED Fax: 0755-86169634 Manufacturer: PAX Computer Technology (Shenzhen) Co.,Ltd. Address:4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech Industrial Park, Shenzhen, Guangdong, P.R.C. Tel: 0755-86169630 Website: http://www.pax.com.cn Responsible Party:PAX Technology, Inc. 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256 Help-desk 1 877-859-0099 P/N200312000000312

Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Hong Kong, China PAX Technology Limited May 29, 2020 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, PAX Technology Limited hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: V5PA920PRO Product Description: Smart Mobile Payment Terminal Model: A920Pro Sincerely, ____________________ Contact Person: Jenna Tan Company: PAX Technology Limited T EL: 86-755-86156663 FAX: 86-755-86156663 E-mail: certservice@paxsz.com SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Date: May 18, 2020 Declaration To whom it may concern, This is a WLAN/Bluetooth combination antenna with FCC ID: V5PA920PRO. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in FCC ID: V5PA920PRO should not be considered to be able to transmit simultaneously. Though the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap Should you have any question, please have my best attention. transmission. Sincerely yours, Contact Person: Jenna Tan Company: PAX Technology Limited TEL: 86-755-86156663 FAX: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Date: June 4, 2020 Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Schematic Diagram Block Diagram Parts List Operational Description Software Operational Description Turn up procedure Subject: Request for Confidentiality FCC ID: V5PA920PRO To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Contact Person: Jenna Tan External Photos Internal Photos Test Setup Photos Users Manual Company: PAX Technology Limited TEL: 86-755-86156663 FAX: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Power of Attorney Date: May 18, 2020 To whom it may concern, Please be notified that I, Jenna Tan, have designated Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following:

FCC ID: V5PA920PRO If you have any acknowledgement and response, please send it to Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, Contact Person: Jenna Tan Company: PAX Technology Limited TEL: 86-755-86156663 FAX: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong DTS-UNII Device Declaration Letter May 29, 2020 Client with Radar detection capability , N/A To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: V5PA920PRO

(1) DFS Device --

(2) Master Client without radar detection capability Active / Passive Scanning , ad-hoc mode access point capability Frequency Band

(MHz) 5150-5250 5250-5350 5470-5725 5725-5850 Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , No No No No passive scanning

(where the device is can listen only with no probes) No No No No Yes , Yes , Yes , Yes , Ad Hoc Mode or WIFI Direct capability Access point capability Yes , Yes , Yes , Yes , No No No No Yes , Yes , Yes , Yes , No No No No No Yes , Country code selection ability -

(3) If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection)

(4) Meet 15.202 requirement -

Please check below:

Yes, No, A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under For client devices that have software configuration control to operate in different modes (active scanning control of the master. A device in client mode is not able to initiate a network.

(5) in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. No Apply, (If apply, please help to provide explanation on it was implement, and how software Apply, was controlled) Factory set only. PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong _______________________ Contact Person: Jenna Tan Company: PAX Technology Limited TEL: 86-755-86156663 FAX: 86-755-86156663 E-mail: certservice@paxsz.com

PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Date: May 18, 2020 Declaration We, PAX Technology Limited, declare that the device, FCC ID: V5PA920PRO, does not support any non-US channels in all the operational mode(s). All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _____________________ Contact Person: Jenna Tan Company: PAX Technology Limited TEL: 86-755-86156663 FAX: 86-755-86156663 E-mail: certservice@paxsz.com