D200 Wireless POS Terminal PAX TECHNOLOGY LIMITED 1. Production Description Front View Back View Back Layout Battery / Battery Cover View Installation 2. 1 SAM Card Installation Open up battery cover, which is at the bottom of the terminal;
Take out battery;
Insert SAM card to corresponding SAM card slot. 2 Battery Installation Hold the battery with its facing up;
Attach battery forelock to battery bayonet;
Press down the other side of the battery 3. Instruction 1 Power ON/OFF Power on: Plug in power adapter or insert the battery, Press button for 3 seconds until LCD DisplayRF Antenna AreaRs232Conncet CapacitiveKeyArea IcCardSlot Magnetic Strip Card Solt USB ConnectBatteryCover ScrewMagneticStripCardSolt Barcode LabelNameplate LabelBatteryArea SAM/SIM Card SlotAntenna Di is heard, and then PAX LOGO will display on LCD. Power off: Press button for 3 seconds until Shutting down... can be seen. POS terminal is being turned off. 2 Magnetic Stripe Card When user swipes magnetic stripe card along the slot, the backside of card, which contains magnetic strip information, should be facing to the terminal. Bi-directional swiping is supported. It is recommended to swipe starting from left to right (or from right to left) with a constant moving speed. 3 IC card When user insert IC card into the IC slot, the chip of IC card should be facing up; user is recommended to gently insert the card, in order to avoid any physical damage to the card or the IC slot of the terminal. If IC card is successfully read by the terminal, the IC card icon will be shown on LCD display screen. ICC Operation Process Before inserting the IC card, please check inside and around the IC card slot. If there is any suspicious object, please dont insert card and immediately report to the relevant staff. 4) Contactless Card Please refer to the picture below, the card read area is above the LCD. 4. Specifications Default CPU 32-bitMIPS Memory32MB SDRAM, 32MB NOR Flash Display2.4 -inch 240x320 pixel color TFT LCDLED backlight Keypad10 alphanumeric keys, 5 functional keystouch key;
Magnetic Card Reader Track 1/2/3bi-directional swipe IC Card Reader1 user card EMV2000 SlotsSAM *1 SAM *1+ SIM *1 (only for GPRS Version) Contactless Card ReaderISO/IEC 14443 Type A/B, Mifare/Felica/NFC CommunicationBluetooth, WIFI, GPRS (Optional, depending on the version) Peripheral Ports1 Micro USB(Device) 1 Mini USB(RS232) Power SupplyInput100240VAC ~0.2A 50/60HZ Output5V DC 1A BatteryLi-on battery,1300mAh, 3.7V Working Environment Temperature0 ~50(32~122) R.H.:10%~93%(non-condense) Storage Environment Temperature:-20 ~ 70 (-4~158) R.H.:5% ~95%(non-condense) Dimensions120mm 72mm 22.1mmL W H Weight165g(no battery)/200g(with battery) 5. Installation and Usage Tips 1)Do not damage electric wire and power adapter. If electric wire or power adapter is damaged , please do not use the terminal any more. 2)Before power adapter is plugged into power socket, please make sure that voltage which the power socket supplies is appropriate working voltage for the terminal. 3)Do not expose the terminal in sunshine, or in humid, hot, or dusty environment 4)Keep the terminal away from liquid material 5)Do not plug any unknown material into any port of the terminal, since it may create serious damage to the terminal. 6)If the terminal is defective, please contact professional POS repair technicians. 7)When D200 power supplied by the USB port of PC,we dont recommend the use of CTLS function. 8)When charged by the USB port of PC, charge time will be longer, we recommend charging using the adapter. 9)When D200 is in charging, if you can't turn on the device, and you just hear "Di Di", please charge it for longer, and try again later. 6.Battery Usage Tips 1) Charge indoor by PAX charger, where is cool and well ventilated;
2) Do not apart the battery;
3) Do not short circuit the battery;
4) Keep the battery away from sunshine, smog and dust;
5) Do not squeeze, punch the battery, put it into liquid or near fire;
6) Keep way from environment which is too hot , too cold, damp and highly explosive;
7) Once a failure happens such as heating or distortion, or it was broken down. Please change new battery;
8) Change new battery if it cannot satisfy your requirement;
9) Change new battery if using more than two years. P/N200312000000171 FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet appareil est conforme aux dispositions de la partie 15 des rgles de la FCC et des normes CNR d'Industrie Canada sur les appareils radio exempts de licence. Son utilisation est assujettie aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interfrence nuisible; et (2) cet appareil doit accepter toute interfrence reue, y compris l'interfrence qui pourrait causer un fonctionnement non dsir. Cet quipement a t test et jug conforme aux limites d'un appareil numrique de la Classe B, en vertu de la partie 15 des rgles de la FCC et de la NMB-003 canadienne. Ces limites sont conues pour fournir une protection raisonnable contre l'interfrence nuisible dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de l'nergie radiofrquence et, s'il n'est pas install et utilis conformment aux instructions, peut causer une interfrence nuisible aux communications radio. Toutefois, il n'est pas garanti que l'interfrence ne se produira pas dans une installation particulire. Si cet quipement cause une interfrence nuisible la rception radio ou de programmes de tlvision, laquelle peut tre dtermine en teignant et en allumant l'quipement, l'usager est encourag essayer de corriger l'interfrence par l'une ou plusieurs des mesures suivantes :
Rorientez ou relocalisez l'antenne de rception. Augmentez la sparation entre l'quipement et le receveur. Connectez l'quipement une prise sur un circuit diffrent de celui auquel de le receveur est connect. Consultez le vendeur ou un technicien radio/de tlvision pour obtenir de l'aide. La FCC ou Industrie Canada peut vous obliger arrter d'utiliser votre appareil si une telle interfrence ne peut pas tre limine. D200 n'a pas approuv les changements ou modifications apports cet appareil par l'usager. Tous les changements ou modifications apports peuvent entraner la rvocation de l'autorisation d'utilisation de l'appareil. FCC RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 0 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: V5PD200WB. For this device, the highest reported SAR value for near the body is 0.99 W/kg. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. SAR compliance for body operation is based on a separation distance of 0 mm between the unit and the human body. IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC: 11689A-D200WB IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limites d'exposition DAS incontrle pour la population gnrale de la norme CNR-102 d'Industrie Canada et a t test en conformit avec les mthodes de mesure et procdures spcifies dans IEEE 1528 et IEC 62209. Cet appareil doit tre install et utilis avec une distance minimale de 0 cm entre lmetteur et votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur.