FCC ID: VUIPS2400-48 5G Integrated Small Cell

 

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE P5G-Outdoor ISC-PS2400 Outdoor 5G NR FR1 4T4R Small Cell User Guide Document Version v1.0.4 Document Release Date: 2026-09-08 Document Number: UG-02050 Copyright Pegatron Corporation. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Legal Notices This document contains confidential information intended only for the recipient. It's protected by copyright, patent, and other laws, as well as agreements that safeguard Pegatron Corporation's rights to this information. Do not copy, share, publish, or reveal any part of this document without Pegatron's written permission. Unauthorized use of this document for any purpose beyond its intended scope is prohibited. Pegatron can make changes to equipment design or specifications at any time without giving notice or taking responsibility. Although Pegatron has done its best to make sure the information in this document is accurate and dependable, there are no guarantees, including accuracy and completeness. Pegatron, along with its affiliates, directors, employees, and agents is not responsible for how you use these documents or any issues that might come up with other people's rights because of your use. These documents do not replace professional advice. There may be mistakes, missing things, or errors in these documents. Pegatron does not give any guarantees unless a Pegatron sales contract or order confirmation says otherwise. Please contact Pegatron if you would like to report any issues in our documents. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE PEGATRON Corporation Address: 76 Ligong Street, Beitou District, Taipei City, Taiwan, 11259 Website: 5g.pegatroncorp.com Email:

[email protected] 2 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Table of Contents 1. Country Safety Statements...................... 4 1.1. Additional Safety Statements...................12 9. Getting Started............................................42 9.1. Connections and access..............................42 2. Document Information ............................14 2.1. Document revision history.........................14 3. Introduction...................................................15 3.1. Integrated Small Cell (ISC) models........15 3.2. Specifications....................................................16 9.2. Connections & Network.............................44 10. Software Section.........................................45 10.1. Firmware upgrade.......................................45 10.2. Accessing the WebGUI..............................46 10.3. Login account and password ................46 10.4. Information .....................................................47 4. Package Contents........................................17 4.1. Integrated Small Cell (ISC) ........................17 10.5. Radio information........................................49 10.6. Configuration - Network..........................50 4.2. Antenna options (page 1/2)......................18 10.7. Timing synchronization ............................53 4.3. Pole mounting kit (page 1/1) ...................21 10.8. Status..................................................................54 4.4. Wall mounting kit (page 1/2)...................22 10.9. Maintenance...................................................56 5. Ports and Indicators ..................................24 5.1. Bottom side parts description..................24 5.2. Right side LED status indicators..............25 10.10. Factory reset.................................................57 10.11. Credential......................................................58 10.12. Diagnosis.......................................................58 10.13. Logs..................................................................59 6. External RF Antenna Design..................27 6.1. Antenna module appearance ..................27 10.14. CU and DU configurations...................61 10.15. OSS configurations ..................................70 7. ISC Installation .............................................28 7.1. Installation requirements............................28 11. Management.................................................71 11.1. Fault Management (FM) Alarms ..........71 7.2. Handling & installation................................29 11.2. Performance Management.....................73 7.3. Wall mounting (page 1/2)..........................30 11.3. Netconf Server for CM..............................74 7.4. Wall mounting (page 2/2)..........................31 11.4. Netconf Operation......................................84 7.5. Pole mounting (page 1/2)..........................32 11.5. Netconf Reboot............................................85 7.6. Pole mounting (page 2/2)..........................33 11.6. Netconf Cell Lock/Unlock........................86 7.7. Earth grounding..............................................34 7.8. Antenna connections (Pegatron)............35 7.9. Antenna connections (Others).................36 7.10. Antenna connections - UL conduit.....37 8. Connector Waterproofing (Tape) .......38 8.1. Connector and tape preparation ...........39 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 3 Pegatron 5G Outdoor ISC-PS2400 User Guide 1. Country Safety Statements EU Declaration of Conformity (DoC) EU: Electromagnetic fields

(Directive 2014/53/EU) reference European Council Recommendation 2014/53/EU details basic restrictions and levels on human exposure to electromagnetic fields as advised by the ICNIRP. Adherence to these recommended restrictions and reference levels should provide a high level of protection as regards the established health effects that may result from exposure to electromagnetic fields. PEGATRON Hereby, Corporation declares that the radio equipment types

<in this document> are in compliance with Directive 2014/53/EU (RED). Example Only

(to be updated) Hereby we declare that this DoC is issued under our sole responsibility and that this product:

Product description:

Trademark:

Batch / Serial number: PS2400 Series 5G Integrated Small Cell PEGATRON Model PS2400-7832Q PS2400-7816Q PS2400-7832O PS2400-7816O PS2400-7832CE PS2400-7816CE PS2400-7832CES 5G NR Band n78 n78 n78 n78 n78 n78 n78 RAM 32GB 16GB 32GB 16GB 32GB 16GB 32GB HW Frequency Support

(MHz) 3450 MHz 3550 MHz 3450 MHz 3550 MHz 3700 MHz 3800 MHz 3700 MHz 3800 MHz 3400 MHz 3800 MHz 3400 MHz 3800 MHz 3400 MHz 3800 MHz Max. Antenna Gain (dBi) 12.54 12.54 12.54 12.54 14.00 14.00 12.54 Common specs: Outdoor, DC power, External Antenna 4T4R, 5W TX. 4 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements - UK & EU CE: RF Exposure Statement To comply with RF exposure requirements, this equipment must be installed and operated ensuring the minimum separation distance specified below is maintained between the radiator and any persons body. Model(s):

Frequency Range:

Maximum RF Output Power:

Maximum EIRP:

Minimum Compliance Distance: 214 cm PS2400-7832CE, PS2400-7816CE 34003800 MHz 44.12 dBm 57.57 dBm UK: Hazardous Substance Notice This product do not contain hazardous substances (as defined in UK Control of Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations 1990). At the end of this products life cycle, the customer should consult with the system integrator to ensure that the product is disposed of in conformance with the relevant regulatory requirements. EU: Waste from Electrical and Electronic Equipment (WEEE) This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 5 Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements - USA USA: Federal Communications Commission This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications made to this device not expressly approved by the manufacturer may void the FCC authorization to operate this device. FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions provided in this manual, may cause harmful interference to radio communications. Operation of this equipment in a residential environment is likely to cause harmful interference. In such cases, the user will be required to correct the interference at their own expense. USA: FCC RF Exposure Information (MPE) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. This equipment should be installed and operated with minimum distance 50 cm

(19.7 in.) between the radiator & your body. The product is to be installed according to the installation instructions. The User/

Operator does not have access to the device once the device is installed and in use. This product is designed for specific application and needs to be installed by qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 6 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements - USA Class 1 Laser Product LASER 1 SFP+ Port Warning: Only use certified Class 1 optical fiber transceiver modules. After installation, this product is considered a Class 1 laser product. French Avertissement concernant le port SFP+ : Utilisez uniquement des modules metteur-rcepteur fibre optique certifis de classe 1. Aprs installation, ce produit est considr comme un produit laser de classe 1. Laser notice The information about the name and publication date of the standard (IEC60825-1:

2014) used for laser classification shall be described. Statement as follows:

PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11 or Complies with FDA performance standards for laser products except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. or Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Manufacturer information The full name and address of the manufacturer of the product provided on the outer housing (enclosure) of the product, outside of the package, container, user manuals or product's directions for use per 21CFR 1010.3(1) and Laser Notice No. 53. See page 2 or last page of this document. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 7 Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements - United States and Canada Equipment class grounding WARNING: Class III equipment achieves electric shock protection through basic insulation and protective earth grounding. This requires all conductive parts that could assume a hazardous voltage in the event of basic insulation failure to be connected to a protective earth conductor. FRENCH: Les quipements de classe III assurent la protection contre les chocs lectriques grce une isolation de base et une mise la terre de protection. Cela exige que toutes les parties conductrices susceptibles de prendre une tension dangereuse en cas de dfaillance de l'isolation de base soient connectes un conducteur de mise la terre de protection. Restricted access location WARNING: This device must be installed in a location with restricted access, and only allowed access using a security device or method by users who have been instructed about the reasons for the control. FRENCH: Cet appareil doit tre install dans un emplacement accs restreint et laccs ne doit tre autoris quaux utilisateurs ayant t informs des raisons de ce contrle, en utilisant un dispositif ou une mthode de scurit. High temperatures cautions CAUTION:To avoid severe burns, do not touch any part of this device for at least 1.5 hours after turning it off. Internal components may remain extremely hot. FRENCH: Pour viter des brlures graves, ne touchez aucune partie de cet appareil pendant au moins 1,5 heure aprs lavoir teint. Les composants internes peuvent rester extrmement chauds. USA & Canada: Radiation notice CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. FRENCH: Lutilisation des commandes ou rglages ou lexcution des procdures autres que celles spcifies dans les prsentes exigences peuvent tre la cause dune exposition un rayonnement dangereux. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 8 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements - United States and Canada UL outdoor usage requirements NOTE: All interconnecting cables must be routed inside UL listed conduits for outdoor use. This device is designed for outdoor use with an ingress protection code of IP65. FRENCH: Tous les cbles interconnects doivent tre achemins lintrieur de conduits homologus UL pour une utilisation en extrieur. Cet appareil est conu pour une utilisation en extrieur avec un indice de protection IP65. Detachable antenna usage This radio transmitter has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal. Les types dantenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour lexploitation de lmetteur. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 9 Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements - United States and Canada FCC Professional Installation Requirements (United States) FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Installation Personnel This product is intended for specific applications and must be installed by qualified personnel with knowledge of RF technology and applicable regulations. End users must not install, configure, or modify this product. Installation Location Requirements This device is intended for use in locations where children are not likely to be present and must not be installed in locations where children may be present. The product shall be installed in a location where the radiating antenna can be maintained at least 50 cm (19.7 in.) from any person during normal operation to comply with RF exposure requirements. External Antenna Use only antennas approved by the applicant. Non-approved antenna(s) may generate unwanted spurious emissions or excessive RF transmit power, which could result in non-compliance with FCC limits and are therefore prohibited. Installation Procedure Refer to the User Guide for detailed installation instructions. Warning: Carefully select the installation location and ensure that the final output power does not exceed the limits specified by the applicable regulations. Violation of these regulations may result in severe federal penalties. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 10 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Country Safety Statements Taiwan: National Communications Commission (NCC) Do not attempt to install or set up the 5G NR O-RU device yourself. Doing so may void the warranty. This device is factory-tuned; no customer calibration or tuning is required. Please contact technical support for installation assistance and for information regarding the settings of your 5G NR O-RU device.

(This equipment must be installed and configured by a professional engineer before it can be used, and it must not be sold directly to general consumers.)

(Before a tele-communications operator installs this base station, they must register it. This also applies to those who have already obtained a radio station installation permit under the Telecommunications Act. This base station may only be used after it has been certified by the Commission and a radio station license has been obtained.) 4800-4900MHz

(For use with private mobile broadband networks, under the condition that it must not interfere with legal communications and must tolerate interference from legal communications.)

(WARNING: To avoid electromagnetic interference, this product should not be installed or used in a residential environment.)

(This device is limited to using the following antennas):

Manu-

facturer Pegatron Antenna Options for models: PS2400-7832CE & PS2400-7816CE Band Model Part Number Antenna Type Max Gain (dBi) Impedance

() n78/

n48 WA-P-

S6G3-05-003 1415-

0B8Y000 PULSE n78 BTEA00201 33G8S6A01 1415-

0A6Q000 WHAYU n78 2F04X6B 1415-

0AFM000 Sector Array Sector 14 dBi

(3400-3800 MHz) 13.33 dBi

(3400-3800 MHz) 13.5 dBi

(3400-3800 MHz) 50 50 50 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 11 Pegatron 5G Outdoor ISC-PS2400 User Guide 1.1. Additional Safety Statements Usage safety precautions Do not use this device where flammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols in area used. Keep this device far from electronic devices that generate strong magnetic or electric fields, such as microwave ovens, satellite dish antennas, or large appliances. Before connecting and disconnecting cables, ensure that your hands are dry. To avoid electric shock, damage, and fire resulting from short-circuiting, do not use the product if wet, with wet hands, or while holding or drinking any liquids. Only insert relevant cables or devices into the ports, do not insert metal or other foreign objects. Do not place naked flame sources, such as lighted candles, on this device. Keep this device far from sources of heat and fire, such as a heater or a candle. Damage caused by user misuse or not following instructions are not covered by warranty. Service information Refer all repairs to qualified service personnel. Do not modify any part of this device, as this will void the warranty. Disconnect the power to this product and return it for service if the following conditions apply:

The product does not function after following the operating instructions outlined in this manual. The product has been dropped or impacted and appears physically damaged. Locate the serial number of the product and record this on your registration card for future reference. Also record the MAC address, located on the product sticker. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 12 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Additional Safety Statements Electrical safety precautions Read all instructional and cautionary documents before operating this device. Ensure that users are experienced with this communications equipment and can make mechanical settings or adjustments safely. Make sure enough electrical sockets are available and not over overloaded by unfused adaptors as this can cause fires. Ensure that no cables are left trailing in a manner that could pose a tripping hazard. Stop using this device immediately if it appears to be faulty or have damaged parts and have it checked by competent persons. This device must be grounded properly to earth. Failure to use properly grounded outlets may result in electrical shocks. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 13 Pegatron 5G Outdoor ISC-PS2400 User Guide 2. Document Information This document details the procedure for installing the component as stated. This document is intended for qualified personnel with a working knowledge of similar equipment. 2.1. Document revision history Version Date Description v0.1.0 2025/09/23 Initial version v0.3.0 2025/12/15 Improvements to this document v0.5.0 2026/02/12 Updated models and antenna options v0.7.0 2026/06/04 v0.9.0 2026/07/22 Max antenna gain (p4) CE models and exposure distance (p5) External antenna info (p10) PS2400-7832CE/-7816CE bandwidth (p14,15) Add Laser safety, update power supply rating p23, update SW section v1.0.0 2026/07/29 Change tool size references from M to mm v1.0.1 2026/08/17 Updated antenna peak gains (p26) and intro (p14) v1.0.2 2026/08/19 FCC (p6) v1.0.3 2026/09/03 FCC (p10) v1.04 2026/09/08 FCC (p6), n48 Ant Gain (p15) Previous page number references will not be updated if pages are increased or decreased. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 14 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 3. Introduction The Outdoor 5G NR FR1 4T4R Integrated Small Cell (ISC) is a compact, flexible solution designed to extend 5G coverage and capacity in enterprise, industrial, and commercial environments. Supporting 3GPP 5G NR Release 16 architecture, it can operate in either disaggregated deployments or as an all-in-one (AiO) unit integrating RU, DU, and CU functions. Built to enable open, cost-efficient networks, the Small Cell supports standardized management and synchronization methods, ensuring seamless integration into private and public 5G systems. Its secure design incorporates both encryption and integrity protection, making it suitable for mission-critical and enterprise-grade applications. This guide provides information and instructions for installing and configuring the Outdoor 5G NR FR1 4T4R Small Cell and is intended for use by trained installation personnel only. 3.1. Integrated Small Cell (ISC) models Model PS2400-7832Q PS2400-7816Q PS2400-7832O PS2400-7816O PS2400-7832CES PS2400-7832CE PS2400-7816CE PS2400-4832 PS2400-4816 PS2400-7932L PS2400-7916L PS2400-7932U PS2400-7916U 5G NR Band n78 n78 n78 n78 n78 n78 n78 n48 n48 n79 n79 n79 n79 RAM 32GB 16GB 32GB 16GB 32GB 32GB 16GB 32GB 16GB 32GB 16GB 32GB 16GB HW Frequency Support (MHz) 3450 ~ 3550 3450 ~ 3550 3700 ~ 3800 3700 ~ 3800 3400 ~ 3800 3400 ~ 3800 3400 ~ 3800 Antenna Gain (dBi) 12.54 dBi 12.54 dBi 12.54 dBi 12.54 dBi 12.54 dBi 14.00 dBi 14.00 dBi Support Bandwidth

(MHz) 20/40/60/100 10/20/40/50/60/

70/80/90/100 3550 ~ 3700 3550 ~ 3700 13.90 dBi 13.90 dBi 10/20/40 4500 ~ 4700 4500 ~ 4700 4600 ~ 4900 4600 ~ 4900 12.4 dBi 12.4 dBi 12.4 dBi 12.4 dBi 100 Common specs: Outdoor, DC power, External Antenna 4T4R, 5W TX. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 15 Pegatron 5G Outdoor ISC-PS2400 User Guide 3. Introduction 3.2. Specifications Specifications and appearance may change without notice. Technology Standard Functional Split 3GPP Rel.16 SA, All-in-one RF Specification n78 (3.3-3.8 GHz), Bandwidth: up to 100 MHz n48/CBRS (3.55-3.7 GHz), Bandwidth: 10/20/40 MHz n79 (4.6-4.9 Ghz), Bandwidth: up 100 MHz n48: 10/20/40 MHz Bandwidth n78: 10/20/40/50/60/70/80/90/100 MHz (80 MHz EA Version) n79: 100 MHz Tx Output Power 5W (37 dBm) per chain / RF antenna port) Active Users 128 connected UEs with 128 active UEs

(Up to 256 active UEs through software upgrade) Synchronization IEEE 1588 PTPv2 (PTP/GPS), ITU-T G.8275.1/8275.2 profiles Modulation Max. 256QAM DL / 256QAM UL Chipset Qualcomm FSM20056 Sub-6 5G Modem Chipset NXP LX2160A 16-Core NPU Processor Physical & Environmental Ethernet Connection Antenna 1 x 10 GbE backhaul 1 x SFP+10 GbE (cage) backhaul 4 x N-type connectors on external antenna unit 1 x SMA for GNSS Ingress Protection IP65 Operating Environment Temp: 40 to +55C, Humidity: 5 to 95 % RH Dimensions (H x W x D) 385.6 x 310.6 x 145.0 mm Weight No Antenna 12 kg Dimensions (H x W x D)

(w/Antenna) 460.0 x 330.0 x 192.0 mm Weight n79 2.74 kg 14.74 kg Weight n78/48 2.87 kg 14.87 kg Mounting Options Wall or Pole Mounting Power Input DC in 48V TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 16 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents 4.1. Integrated Small Cell (ISC) Specifications and appearance may change without notice. Parts Qty Image Integrated Small Cell (ISC) without Antenna PN: PS2400-***

Integrated Small Cell (ISC) with Pegatron Antenna PN: PS2400-***

PN: Pegatron Antenna Unit

(see next page) Power supply (optional):

Recommended specs:

DC 48V Power Adapter with 4-pin 1 M25 Waterproof Connector Input: 100-240V, 50/60Hz, 2.8A Output: 48Vdc, 4.17A, 200W max D: 145.0mm Front Back H:

385.6 mm 1 W: 310.6mm D: 192.0mm (w/Antenna) Back H: 460.0mm

(w/Antenna) Pegatron Antenna Unit is mounted on the front side W: 330.0mm (w/Antenna) Note: If this product does not include a power supply, you must supply it with a UL-listed power supply suitable for use at max temp rating of +55C and an operating altitude up to [5,000] m, with an output rating of 48 Vdc, 4.17 A. Please contact Pegatron if you need more information. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 17 Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents - Antenna 4.2. Antenna options (page 1/2) Specifications and appearance may change without notice. Parts Image 80 mm w/bracket Optional Pegatron Antenna Connector type: 4.3-10 Operating temp: -40 to +55CH Humidity:

5 to 95% RH Wind speed:

Rated Max: 60 m/s n79 Brand: Pegatron n79 Model: WA-P-S6G3-05-004 /

WA-P-S6G3-05-005 n79 PN:

1415-0B90000 /

1415-0BHD000 n78/n48 Brand: Pegatron n78/n48 Model: WA-P-S6G3-05-003 n78/n48 PN:

1415-0B8Y000 Optional External Sector Antenna n78/n48 100 mm n78/n48 Brand: PULSE n78/n48 Model: BTEA0020133G8S6A01 n78/n48 PN:

1415-0A6Q000 m m 0 6 4 330 mm Model:

Pulse n78/48 409 mm 15 mm 280 mm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 18 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents - Antenna Antenna options (page 2/2) Specifications and appearance may change without notice. Parts Optional External Sector Antenna n79 n79 Brand: WHAYU n79 Model: 2G04X6B n79 PN: 1415-0ACP000 Optional External Sector Antenna n78/48 n78/n48 Brand: WHAYU n78/n48 Model: 2F04X6B n78/n48 PN: 1415-0AFM000 Image 156 mm Model:

Whayu 270 mm 31 mm 85 mm 156 mm Model:

Whayu 270 mm 31 mm 85 mm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 19 Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents - Antenna Antenna options (page 2/2) Specifications and appearance may change without notice. Parts 2. SFP housing for cable PN: Pipe SFP Waterproof IP67 after mated 3. RJ45 housing for cable PN: Pipe RJ45 Waterproof IP67 after mated 4. Waterproofing rubber mastic tape PN: TAPE 3M #2228 300cm Qty x 1 x 1 x 2 5. Waterproofing mastic tape PN: 3M #2166 60cm x 2

(Called #2229 in some markets) Optional N-Type Male Plug to 4.3/10 Male Plug RF cable assembly (321 mm)

(For Pegatron antenna) PN: 1418-01RG000 x 4 Image L: 321mm N-Type (M) 4.3-10 (M) TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 20 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents - Mounting kits 4.3. Pole mounting kit (page 1/1) Specifications and appearance may change without notice. Parts Qty Image 1. Adjustable case mounting plate PN: CASE_ADJUSTED 2. Pole clamp or Wall bracket

(outer part) PN: POLE_BRACKET 3. Long bolts PN: M10_HEX_HEAD_230MM 4. Medium bolts PN: M10_HEX_HEAD_190MM 5. Washers PN: M10_SPRING_WASHER 6. Nuts PN: M10_HEX_NUT 7. Short screws PN: M8_SCREW x 1 x 2 x 4 x 2 x 8 x 6 x 4 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 21 Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents - Mounting kits 4.4. Wall mounting kit (page 1/2) Specifications and appearance may change without notice. Parts Qty Image 1. Adjustable case mounting plate PN: CASE_ADJUSTED 2. Pole clamp or wall bracket (outer part) PN: POLE_BRACKET 3. Wall bracket (inner part) PN: WALL_BRACKET x 1 x 1 x 1 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 22 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 4. Package Contents - Mounting kits Wall mounting kit (page 2/2) Specifications and appearance may change without notice. Image Parts 4. Short bolts PN: M10_HEX_HEAD_120MM 5. Medium bolts PN: M10_HEX_HEAD_190MM 6. Anchor bolts PN: M10_WALL_PLUG 7. Nuts PN: M10_HEX_NUT 8. Short screws PN: M8_SCREW 9. Washers PN: M10_SPRING_WASHER Qty x 3 x 2 x 4 x 5 x 4 x 10 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 23 Pegatron 5G Outdoor ISC-PS2400 User Guide 5. Ports and Indicators 5.1. Bottom side parts description 4 3 2 1 5 6 7 8 Bottom Side Item 9 Top Side Description Antenna ports Port 1 Port 2 Port 3 Port 4

1 2 3 4 5 DC -48V power in This product is intended to be powered by a Listed Power Adapter or DC power source marked, rated -48 Vdc, 4.17A minimum, max temp rating of +55C. 6 SFP+: 10 Gbps Default IP: 192.168.1.11, Network interface name: eth1 7 RJ45: 10 Gbps Default IP: 192.168.0.10, Network interface name: eth0 8 Pressure venting port Automatically relieves pressure when needed. No user interaction required. 9 GNSS input (SMA connector) For external RF cable and GNSS (GPS) antenna Class 1 Laser Product LASER 1 SFP+ Port Warning: Only use certified Class 1 optical fiber transceiver modules. After installation, this product is considered a Class 1 laser product. 24 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 5.2. Right side LED status indicators 5. Ports and Indicators - LED Power Sync 5G WAN 1. [Power] Off: No power source, Green: Power source good Right Side State LED Sync 5G WAN Notes Boot Loader fail Boot Loader pass Sync 5G WAN Sync 5G WAN Boot Kernel Sys check fail Boot Kernel Sys check pass Sync 5G WAN Off System Booting System Booting System boot Fail Sync 5G WAN System boot Good Boot FSM / L1 fail Sync 5G WAN Amb Off FSM / L1 bring up Fail Boot FSM / L1 pass Sync 5G WAN G flsh Boot GPS / PTP fail Sync 5G WAN Amb FSM / L1 bring up Pass Off GPS / PTP Timing Sync Fail 9 GPS / PTP Done Sync 5G WAN G flsh 10 Time sync Locked /

Hard sync Sync 5G WAN 11 CU booted fail Sync 5G WAN Green 12 CU booted pass Sync 5G WAN GPS / PTP Timing Sync Locked Hard Sync Ready (L1 /

MacE up Good) Amb G flsh CU Bring up Fail CU Bring up Good

State LED Sync 5G Notes

2 3 4 5 6 7 8 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 25 Pegatron 5G Outdoor ISC-PS2400 User Guide 5. Ports and Indicators - LED

State LED Sync 5G WAN Notes 13 5gc connection fail Sync 5G WAN Amb 14 5gc connection pass Sync 5G WAN 15 DU booted fail or DU Down Sync 5G WAN Grn Grn flsh Off 16 DU booted pass Sync 5G WAN Grn CU connect to 5GC failed

(Same as CU Bring up fail) CU connect to 5GC OK

(Same as CU Bring up OK) DU bring up fail (ISC gNB Activation Failed) or DU down DU bring up OK (ISC gNB Activated & 5G in service) 17 18 19 20 21 22 23 24 25 26

Ethernet Backhaul

(WAN port) failed Ethernet Backhaul

(WAN port) Link Up Ethernet Backhaul

(WAN port) Link Down Sync 5G WAN Sync 5G WAN Off Sync 5G WAN Amb WAN port (backhaul) failed Grn Off WAN port(Backhaul) Link up connection OK WAN port(Backhaul) Link up connection Ethernet TX RX / Cell Transmitting Sync 5G WAN Green Grn flsh Data I/O transmitting (UE Data Transmission) FW Upgrading pass Sync 5G WAN Green flashing FW uploading in progress FW Upgrading failed Sync 5G WAN Amber flashing FW upgrading Failed FW Upgrade complete pass FW Upgrade complete failed Sync 5G WAN Green FW upgrading Completed... Preparing to reboot Sync 5G WAN Amber FW upgrading Time sync hold over during operation Sync 5G WAN Grn / Amb alternating Grn flsh Time Sync at Hold Over stage during operation Time sync hold over failed Sync 5G WAN Amb flsh Grn Time Sync hold over timeout exceed threshold State LED Sync 5G WAN Notes TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 26 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 6. External RF Antenna Design 6.1. Antenna module appearance n78/48 Inside n79 Inside Back 4 3 2 1 4 3 2 1 Ant: 1 2 3 4 Antenna module specifications Item n79 n78/n48 Frequency 4400 to 4900 MHz Antenna type Cross dipole array Return Loss

> 10 dB Isolation Meets -20 dB n78: 3300 to 3800 MHz n48: 3550 to 3700 MHz S11 Meets -10 dB (4500-4900 MHz) Meets -10 dB (3400-3800 MHz) Efficiency Peak Gain 3-dB Beamwidth Meets -3 dB (4500-4900 MHz) Meets -3 dB (3400-3800 MHz) 12.4 - 13.9 dBi (4500-4900 MHz) 13.1 - 14.4 dBi (3400-3800 MHz) Vertical plane: 18 Horizontal plane: 51 to 58 Vertical plane: 13 Horizontal plane: 60 to 66 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 27 Pegatron 5G Outdoor ISC-PS2400 User Guide 7. ISC Installation 7.1. Installation requirements Before installation, assess the strength and reliability of the support structure based on the total weight of the installed equipment and cables. Space requirements for installing a single ISC This ensures normal operation and provides sufficient space for maintenance. Ground installations: Maintain a minimum clearance of 50 cm from the ground, with a recommended distance of 70 cm or more. Non-ground installations: Refer to the provided diagram for the recommended spacing requirements.

>30cm

>80cm

>30cm

>30cm

>80cm

>50cm WARNING: To ensure proper air circulation and effective heat dissipation around the ISC, do not install it in indoor or outdoor cabinets (such as enclosed camouflage boxes) or in closed rooms without active cooling systems. Such conditions can lead to overheating and may cause the ISC to malfunction. 28 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 7. ISC Installation 7.2. Handling & installation Before installation, transport the ISC to the site in its packaging. Avoid collisions during transport, handling, and installation. Wear clean gloves and avoid touching connectors or ports with bare hands or dirty gloves. Installation procedure 1. Pre-installation checklist Ensure you understand the required safety standards, power requirements, and necessary tools. Verify that all necessary parts and components are available or identified for procurement. 2. Site preparation Survey the installation site, including support structures. Collect all required parts and tools. Implement necessary safety measures at the site. 3. Mounting the ISC Use the mounting kit to securely attach the ISC to a pole, wall, or a stable support frame. 4. Grounding Connect the grounding cable from the ISC to an appropriate earth conductor. 5. Antenna Connection Attach the antenna cables from the ISC to a certified external antenna. Ensure waterproofing of the antenna cable connectors on both the ISC and the external antenna. The steps are shown at the end of this section. 6. Fiber and Ethernet Connections Install the fiber cable to the SFP+ port and connect it to a fiber termination box. Install an Ethernet cable to connect the RJ45 LAN port to an Ethernet switch. 7. Power Supply Connect the provided power cable to an appropriate power source, depending on the ISC model. Once powered, the units power light will turn on automatically. WARNING: This device must be grounded using a green and yellow striped copper wire with either a single core of at least 16 AWG or a multicore of at least 14 AWG. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 29 Pegatron 5G Outdoor ISC-PS2400 User Guide 7. ISC Installation - Wall 7.3. Wall mounting (page 1/2) Step 1: Drills holes for the bracket Align WALL_BRACKET to a flat surface with a level tool and trace four screws. Drill four holes with a 14 diameter bit to depth of 70mm. Wall Bracket 70mm 70 70 mm mm 14 14 60mm Step 2: Install anchor bolts & bracket Secure the WALL_BRACKET with:

M10_WALL_PLUG (x4) M10_WASHER (x4) M10_SPLIT_WASHER (x4) M10_NUT (x4) Step 3: Secure case back plate Secure the CASE_ADJUSTED back plate onto the ISC back with:

M8_SCREW (x4). Level 70mm 60mm Washer Split Washer Nut 24.5 10mm 24.5 Nm Nm Wall Bracket Back Case adjusted back plate TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE M8 Screw x4 6mm 14.9 Nm 30 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 7.4. Wall mounting (page 2/2) Step 4: Assemble wall mount M10 Washer & 120mm Hex Bolt 7. ISC Installation - Wall Wall Bracket Pole Bracket M10x190mm 10mm 29.4 Nm Leave 10mm on each side Do not tighten M10 Washer x8

& Hex Nut x4 Need 10mm on each side M10 x 190mm Bolt & Washer Secure the POLE_BRACKET to the WALL_BRACKET with:

M10_HEX_SOCKET_120MM (x3) M10_HEX_SOCKET_190MM (x1) M10_SPRING_WASHER (x8) M10_HEX_NUT (x4) Step 5: Hang the Small Cell Latch the CASE_ADJUSTED plate onto the loose bolt on the wall mount assembly. Step 6: Secure the Small Cell Secure CASE_ADJUSTED plate with:

M10_HEX_SOCKET_190MM (x1) M10_SPRING_WASHER (x2) M10_HEX_NUT (x1) Tighten the two M10_HEX_NUT on the other side. M10 Washer

& Hex Nut 10mm 29.4 Nm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 31 Pegatron 5G Outdoor ISC-PS2400 User Guide 7.5. Pole mounting (page 1/2) For diameter 3-12cm (1.18-4.72in) Step 1: Mount clamps to pole Align the POLE_BRACKET with another POLE_BRACKET, and secure with:

M10_HEX_SOCKET_230MM (x4) M10_SPRING_WASHER (x4) M10_NUT (x4) Step 2: Secure case plate to back Secure the CASE_ADJUSTED plate onto the back with:

M8_SCREW (x4) 7. ISC Installation - Pole 10mm 29.4 Nm 312cm Pole Bracket M10x230mm Hex Bolts M10 Washers

& Hex Nut x4 Back Case adjusted back plate M8 Screw x4 6mm 14.9 Nm 32 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE

 

 

Pegatron 5G Outdoor ISC-PS2400 User Guide 7. ISC Installation - Pole 7.6. Pole mounting (page 2/2) Step 3: Insert long bolt into bracket 312cm Insert the M10_HEX_SOCKET_190MM (x1) into the POLE_BRACKET, and lightly secure with:

M10_SPRING_WASHER (x2) M10 Washer

& Hex Nut M10_HEX_NUT (x1) Leave 10mm on each side because the next step will hang the Small Cell onto this bolt. Do not tighten Step 4: Hang the Small Cell Latch the CASE_ADJUSTED back plate onto the loose bolt on the pole mount assembly. 312cm Pole Bracket M10x190mm

& Washer Leave 10mm on each side Need 10mm loose on each side of bolt Step 5: Secure the Small Cell Secure the CASE_ADJUSTED plate with:

M10_HEX_SOCKET_190MM (x1) M10_SPRING_WASHER (x2) M10_HEX_NUT (x1) Tighten the two M10_HEX_NUT on the other side. M10 190mm Hex Bolt & Washer M10 Washer

& Hex Nut 10mm 29.4 Nm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 33 7. ISC Installation Pegatron 5G Outdoor ISC-PS2400 User Guide 7.7. Earth grounding To connect the ground cable, remove the M6-sized grounding screw from the unit and attach the provided green- yellow grounding cable using the OT terminal. Secure the other OT terminal end to an external ground bar that is connected to a protective earth conductor. Power surge ground cable example on the right (not included). Note: When installing the grounding cable, ensure that the OT terminal crimps are oriented properly, so they sit flat against the protective earth conductor. Earth Grounding WARNING: This device must be grounded using a green and yellow striped copper wire with either a single core of at least 16 AWG or a multicore of at least 18 AWG. 34 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 7. ISC Installation 7.8. Antenna connections (Pegatron) Connect the four provided N-Type Male Plug to 4.3/10 Male Plug RF cable assembly to the antenna unit. N-Type (M) 4.3-10 (M) 321 mm 4.3-10 (F) Ports 4 3 2 1 N-Type (F) 20mm 5 Nm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 35 Pegatron 5G Outdoor ISC-PS2400 User Guide ISC Installation 7.9. Antenna connections (Others) Secure the plastic antenna unit with the provided mounting clamp and connect the long RF cables purchased separately with your antenna. PR1410-78/48 (Pulse) optional PR1410-79 (Whayu) optional 4 3 2 1 1 2 3 4 20mm 5 Nm 20mm 5 Nm 4 3 2 1 G r o u p 2 G r o u p 1 Back Side 4 3 2 1 20mm 5 Nm G r o u p 2 G r o u p 1 20mm 5 Nm 4 3 1 2 Front Angle 36 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 7.10. Antenna connections - UL conduit WARNING: The RF cables on both the ISC and the external antenna must equally matched in the designated port number. For example (name will vary on the antenna):

ANT1 to Port1 ANT2 to Port2 ANT3 to Port3 ANT4 to Port4 If your antenna ports are labeled Group 1 and Group 2:

Connect ANT1 & ANT2 to Group 1 Connect ANT3 & ANT4 to Group 2 UL outdoor usage requirements IMPORTANT: The mains power cord, the power output cord, and all system interconnecting cables shall be routed inside UL-listed conduits for outdoor use. ISC Installation UL listed conduit for outdoor use TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 37 Pegatron 5G Outdoor ISC-PS2400 User Guide 8. Connector Waterproofing (Tape) CRITICAL WARNING: Failure to strictly follow the waterproofing instructions for the antenna connectors on the radio and antenna units will void the warranty. You must take photographic evidence of each installation step for future reference or upon request. Materials provided If the provided materials are unavailable, use equivalent alternatives that strictly meet the specified technical criteria. conformable, 3M Scotch Seal Tape 2229 (called 2166 in some markets) is a 125 mil thick, highly tacky mastic, available in roll and pad form on an easy release liner, suitable for insulating, padding, and sealing objects against adverse environmental conditions. It withstands temperatures up to 194 F (90 C). It is UV resistant, has self-healing properties after being cut or punctured, and adheres to irregular surfaces to provide excellent moisture resistance. 3M Scotch Rubber Mastic Tape 2228 is a 65-mil thick, premium grade, highly conformable, self-fusing rubber electrical insulating and sealing tape. It consists of an ethylene propylene diene monomer (EPDM) backing coated with an aggressive, temperature-stable mastic adhesive on a liner. Designed for electrical insulating and moisture sealing, it is intended for both indoor and outdoor applications, including resistance to UV exposure. weather-exposed Width: 63.5 mm (2.5 in) Width: 50.8 mm (2 in) 38 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 8. Connector waterproofing Pegatron 5G Outdoor ISC-PS2400 User Guide 8.1. Connector and tape preparation Step 1:

1. Clean and dry the area: Ensure the area around the N-Type port is thoroughly cleaned and dried. 2. Mark 7mm (1/4in) with a pencil next to each antenna connector. You will cover the pencil marking with tape. Step 2:

1. Measure 3M #2166 Sticky Mastic Tape to 10cm. 2. Measure 3M #2228 Rubber Mastic Tape to 50cm. 3M #2166 10 cm (4 in) 3M #2228 50 cm (20 in) TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 39 Pegatron 5G Outdoor ISC-PS2400 User Guide 3M Scotch Seal (tacky) Tape 2229/2166 8. Connector waterproofing 1.3 cm (1/2 in) Step 3:

1. Clean and dry the area: Ensure the area around the N-Type port is thoroughly cleaned and dried. 2. Wrap the tape: Cut a 10 cm length of 3M Scotch Seal (tacky) Tape 2229/2166, remove the entire paper backing, and wrap it securely around the entire metal connector, including the gap and at least 1.3 cm (1/2 inch) of the enclosure you marked earlier. 3. Squeeze to secure: Apply firm pressure to the tape, ensuring it adheres fully to both the connector and the enclosure, eliminating any air gaps. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 40 Copyright Pegatron corporation 2026. All rights reserved. 8. Connector waterproofing Pegatron 5G Outdoor ISC-PS2400 User Guide 3M Scotch Rubber Mastic Tape 2228 Step 4:

1. Wrap the tape: Cut a 50 cm length of 3M Scotch Rubber Mastic Tape 2228. Remove only one-third of the paper backing and begin wrapping at a point 10 cm (4 inches) from the base of the connector. 2. Stretch and wrap: Stretch the tape to three-quarters of its original width and apply it in half-lapped layers, ensuring a uniform build-up as you wrap down to the base of the connector. Make sure the waterproof tape overlaps and fully covers the previous layer of Mastic Tape. 10 cm

(4 in) 1 2 3 3. Ensure proper layers: Follow the wrapping direction as shown to form three layers of waterproofing, maintaining the overlap while wrapping over both the RF cable and the connector. 4. Squeeze to secure: Apply firm pressure to the tape, ensuring it adheres completely to both the connector and the enclosure, eliminating any air gaps. Step 5:

Repeat all steps to seal all four antenna connectors. Step 6:

Repeat all steps to seal all four antenna connectors on the external plastic antenna unit. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 10 cm

(4 in) 1 2 3 Copyright Pegatron corporation 2026. All rights reserved. 41 Pegatron 5G Outdoor ISC-PS2400 User Guide 9. Getting Started 9.1. Connections and access This section provides a quick overview for accessing and operating the ISC (Integrated Small Cell). It covers cable connections, network configuration for access, RAN configuration, status checks, log collection, and firmware upgrades. GPS (GNSS) antenna Lightning Surge Protection RF cable with N-type connectors Example of DC power supply DC PWRPWR SFP+

RJ45 P r o v i d e d p o w e r s u p p l y F i b e r o p t i c c a b e l

1 0 G b E

) E t h 1

S F P

) I P

1 9 2

. 1 6 8

. 1

. 1 1 E t h e r n e t c a b e l

1 0 G b E

) E t h 0

R J 4 5

) I P

1 9 2

. 1 6 8 0

. 1 0

. AMF UPF R J 4 5 S F P

5GC server

[Option 1]

N2/N3 binding to RJ45 (Eth0) Connection Option 1 Connection Option 2 100-277V, 50/60Hz AC power outlet

[Option 2]

N2/N3 binding to SFP+ (Eth1) IMPORTANT: The power supply cord(s) must be plugged into socket-outlet(s) provided with a suitable earth ground. Management network configuration The ISC contains 2 interface for management access, one of RJ45, another one is SFP+, refer to Network configuration to configure it accordingly. NGC/NGU (N2/N3) network configuration The ISC contains 2 interface for backhaul N2/N3 connection, either choose to binding to RJ45 or SFP+, refer to Network configuration to configure it accordingly. Timing synchronization configuration The ISC supports GNSS, PTP, and GNSS+PTP synchronization mode. Refer to GNSS configuration to configure it accordingly. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 42 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 9. Getting Started - Connections Connections and access (alternative) For initial provisioning, you can connect to the ISC in a few different ways. GPS (GNSS) antenna Lightning Surge Protection RF cable with N-type connectors Connection Option 2 DC PWRPWR SFP+

RJ45 P r o v i d e d p o w e r s u p p l y F i b e r o p t i c c a b e l

1 0 G b E

) E t h 1

S F P

) I P

1 9 2

. 1 6 8

. 1

. 1 1 E t h e r n e t c a b e l

1 0 G b E

) E t h 0

R J 4 5

) I P

1 9 2

. 1 6 8 0

. 1 0

. AMF UPF S F P

5GC server Backhaul switch R J 4 5 R J 4 5 SFP+

Control PC 1 Control PC 2 to ISC - SFP+

to ISC - RJ45 192.168.1.x/24 192.168.0.x/24 Example of DC power supply 100-277V, 50/60Hz AC power outlet IMPORTANT: The power supply cord(s) must be plugged into socket-outlet(s) provided with a suitable earth ground. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 43 Pegatron 5G Outdoor ISC-PS2400 User Guide 9. Getting Started - Connections 9.2. Connections & Network This section details the required physical connections and network settings to establish access. Access to the WebGUI requires a login account and password (described later). Connection Options Connect your Control PC (PC 1 or PC 2) using one of the following methods. The N2/

N3/Management traffic must be routed through a backhaul switch for all options. Interface Cable Traffic Binding Note SFP+ (eth1) RJ45 (eth0) Optical Fiber Binds N2/N3 to eth1 Cat 6A 10Gb Ethernet Binds N2/N3 to eth0 High-speed fiber link High-speed link Control PC IP Configuration (can use either 1 of 2) To communicate with the device, your PCs IP address must be manually configured to match the required subnet of the connected port. Connected Port Cable Required PC Subnet Example PC IP SFP+ (eth1) RJ45 (eth0) Optical Fiber Cat 6A 10Gb Ethernet 192.168.1.x/24 192.168.0.x/24 192.168.1.5 192.168.0.5 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 44 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section 10.1. Firmware upgrade Since FW v1.1.1.5, a single binary file was introduced for upgrading. Refer to below section to upgrade the firmware:

Refer to Maintenance - General Upgrade for whole system firmware upgrade, including bootloader, kernel, gNB DU/CU stack. Refer to Maintenance - gNB Upgrade for DU/CU stack only upgrade. Install FW image to EMMC:

1. Check current running slot: imgSwUpg.sh show 2. Install FW to EMMC:

Install to EMMC-1 (If current running slot is 2, then upgrade should choose another slot EMMC-1)

./flex-installer.sh -b boot_LS_arm64_lts_5.15.tgz -B2 -r ls-image-main-lx2160apgc.tar. gz -R3 -f firmware_lx2160apgc_emmcboot.img -d /dev/mmcblk1

./flex-installer.sh -r SYSREPO_CUDU_4.6.0_PEGA_1.0.0_HOST_.tar.gz -R5 -d /dev/

mmcblk1 Install to EMMC-2 (If current running slot is 1, then upgrade should choose another slot EMMC-2)

./flex-installer.sh -b boot_LS_arm64_lts_5.15.tgz -B6 -r ls-image-main-lx2160apgc.tar. gz -R7 -f firmware_lx2160apgc_emmcboot.img -d /dev/mmcblk1

./flex-installer.sh -r SYSREPO_CUDU_4.6.0_PEGA_1.0.0_HOST_.tar.gz -R8 -d /dev/

mmcblk1 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 45 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI 10.2. Accessing the WebGUI Once your physical connection is complete and your PCs IP is configured (as described in the technical section), you can log in via a web browser. Device IP Addresses You can access the WebGUI using any reachable IP address. The default device IPs are:

For SFP+ connections: 192.168.1.11 For RJ45 connections: 192.168.0.10 Access URL and Subnet Check Open any web browser on your Control PC. In the address bar, type the devices IP address:

URL: http://<Device (RU) IP>

Examples:

http://192.168.0.10 or http://192.168.1.11 REMINDER: If you cannot reach the WebGUI, double-check that your PCs IP address is on the same subnet as the device IP you are trying to reach (e.g., if you use 192.168.0.10, your PC must be 192.168.0.x). 10.3. Login account and password There are several accounts used to access the ISC. Type Account Password Permission Description SSH connection padmin ruser padmin Pega@2025 Pega#1234 Pega@2025 WebGUI log in ruser Pega#1234 Super user Non-sudo user Super user 1. No Terminal page. 2. Cannot upgrade single DU, CU, OAM image. MPlane Netconf Session connection root PEGA@xu42k6xj4 root 46 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI 10.4. Information This section contains below informations:

PS2400 information: Including generic hardware product information. Software/Firmware information: Including software version information across different swappable slot Radio information: Including radio information, frequency and bandwidth. PS2400 information Basic ISC information, including Model name, serial number, HW version, FW version, DU/CU version. SW/FW Info (Software/Firmware information) This section displays multiple software slot in ISC, including Running slot, and Writable slot. Running slot Currently running slot. Writable slot Slot used to upgrade. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 47 10. Software Section WebGUI - Information Pegatron 5G Outdoor ISC-PS2400 User Guide SW/FW Info (cont.) To swap software slot, click boot index swap button, it will show Switch to image #, example shows it switched from Running slot EMMC-1 to Writable slot EMMC-2. T activate it, need to perform Reboot. Then refer to section Factory reset to perform Reboot - Clean temporary data

- Restore default. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 48 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Information 10.5. Radio information This section including basic radio information, including PointA, SSB, Center Frequency, Band and Bandwidth. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 49 Pegatron 5G Outdoor ISC-PS2400 User Guide 10.6. Configuration - Network This page includes:

10. Software Section WebGUI - Configuration Management network interface IPv4 configuration, either static (Manual) or DHCP. NGC toward 5GC-AMF, NGU toward 5GC-UPF IPv4 configuration. VLAN is supported. Choose binding to eth0 (RJ45) or eth1 (SFP+), need to reboot to apply change. Routing Table: N2 gateway routing table configuration is supported. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 50 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Network configuration (example) 10. Software Section WebGUI - Configuration RJ45 Ethernet cable (10GbE) Eth0 (RJ45) IP: 192.168.0.10 Backhaul switch RJ45 N2/N3 binding to RJ45 (Eth0) AMF UPF RJ45 5GC server Eth0 192.168.0.10 N2-GW 192.168.2.175 AMF 192.168.3.10 Eth0-ngc 192.168.2.10 N3-GW 192.168.4.175 UPF 192.168.5.10 Eth0-ngu 192.168.4.10 Based on above topology, you can configure NGC/NGU IPv4 as below picture, then click button Save NGC/NGU, then reboot to activate new settings. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 51 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Configuration Network configuration (example) Note: Routing entry may not able to create at this moment, reboot to activate interface setting, then refer to next page to make sure eth0:ngc and eth0:ngu interface are created, then routing entry can be added. Go to Diagnosis -> Terminal, check eth0:ngc and eth0-ngu interface are created and IPv4 configured correctly, then you can add Routing entry accordingly. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 52 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Configuration 10.7. Timing synchronization ISC supports GNSS, PTP G.8275.1 and G.8275.2 profile for timing synchronization. Need to click Save button and reboot to apply change. Since FW v1.1.2.0, includes FreeRun mode for experimental usage. Time Zone setting, Parameter G.8275.1 Profile G.8275.2 Profile 1-Step, 2-Step sync_interval delay_req_interval announce_interval announce_receipt_timeout local_priority domain number Both supported by default Both supported by default

-4

-4

-3 3 128 24

-6

-6 0 2 128 44 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 53 Pegatron 5G Outdoor ISC-PS2400 User Guide 10.8. Status Network status 10. Software Section WebGUI - Status Check physical eth0 (RJ45) and eth1(SFP+) network status, including:

Interface show eth0 or eth1 IPv4 show interface IPv4 address MAC show interface mac address MTU - show interface MTU RX Packets show interface RX packets TX Packets show interface TX packets Link show interface link state TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 54 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Timing synchronization status Check timing synchronization status, including:

10. Software Section WebGUI - Status GNSS Lock Status PTP (G.8275.1) Lock Status Interface name Offset from master PTP (G.8275.2) Lock Status Interface name Timer server address Offset from master TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 55 Pegatron 5G Outdoor ISC-PS2400 User Guide 10.9. Maintenance General upgrade including 3 partitions:

10. Software Section WebGUI - Maintenance Uboot Bootloader information, if checked, system will boot from EMMC-1 slot, please refer to section Software/Firmware information to swap to upgraded slot manually. Kernel and rootfs Kernel and file system. gNB DU/CU software stack. Actions: Reboot after upgrade If this option is selected, then system will automatically reboot and boot with the correct EMMC slot for the new firmware. Note: If the Uboot partition is selected for upgrade, refer to the section Software/Firmware information to verify the EMMC slot with the expected firmware. Upgrade steps:

1. Choose FW .bin file 2. Click upload, it will take few minutes to upload the FW .bin file from your Control-PC to ISC. Shows: Image uploading 3. Checked all 3 partitions, uboot/kernel and rootfs/gNB, then click Start upgrade. Shows: System upgrading it will take few minutes. 4. After upgraded successfully, system will Reboot automatically. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 56 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Maintenance 10.10. Factory reset There are three types of factory reset on the ISC:

Reset levels 1. Reboot ISC. 2. Clear the log, temp data, reboot the system. 3. Clear the log, temp data, restore CUDU XML file to factory default, reboot the system. 4. Clear the log, temp data, restore CUDU XML file to factory default, reset all settings (including Timing configuration and IP address), reboot the system TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 57 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Diagnosis 10.11. Credential This page provides the ability to change password for the account currently logged into. 10.12. Diagnosis Terminal Only available in DEBUG-type firmware image. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 58 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Diagnosis 10.13. Logs In this page, you can click specific component in category DISPLAY to show live log. Syslog: showing system general log CU log/status/console: CU log, statistical counter, console log. DU log/status/console: DU log, statistical counter, console log. PTP: Timing log, content will depend on timing synchronization method GPS and PTP. You can also click archive_today or archive_all_history in category DOWNLOAD to collect ISC log for further investigation. Archive_today: todays log Archive_all_history: last 30 days logs, rotated everyday at 00:00:00 +0 GMT time. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 59 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - Diagnosis Syslog Setup This page follows standard Syslog protocol to upload log to server side. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 60 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations 10.14. CU and DU configurations System Provision Method can choose to configure via local WebGUI or remote NetconfClient with M-plane (usually is EMS/SMO like tool). When choose Remote, below configuration will be blocked and solely rely on remote NetconfClient tool Configuration -> Network -> NGC/NGU configuration Configuration -> Timing sync CUDU config -> Single Item CUDU config -> Neighbor Cell The AutoRun configuration will start OAM/DU/CU service automatically once timing synchronization locked. (Need to reboot to apply change). Radio Enable/Disable allow to turn on/off RF radio dynamically. Only available when CU/DU is activated. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 61 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations Configuration -> Network -> NGC/NGU configuration is blocked if provision method choose Remote. Configuration -> Timing sync is blocked if provision method choose Remote. 62 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations CUDU config -> Single Item is blocked if provision method choose Remote. CUDU config -> Neighbor Cell is blocked if provision method choose Remote. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 63 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations XML file based configuration DU/CU configuration is XML file based. In this page, DU/CU configuration will be applied based on whole XML file, user can switch, upload, download XML file. Switch Running XML select running xml. Upload external XML File upload external xml to ISC. Available XML Files download available xml files from ISC. In section DU/CU configuration System , when the Provision Method is changed to Remote and the NetconfClient pushes the configuration into ISC, the system will automatically generate an XML file named Remote_NETCONF_Config.xml. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 64 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations XML file preview DU/CU configuration is XML file based. In this page, select specific configuration XML file, and review the whole xml file content. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 65 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations Single item configuration (Basic) Different to XML file based configuration, this page provides single item configuration. The contents are showed/applied to running XML file selected in section XML file-

based configuration. The basic configuration page includes:

Center frequency PointA frequency SSB frequency Bandwidth Tx Power nRPCI MCC MNC TAC SST SD gNB ID gNB ID length TDD Click (Detail) besides Bandwidth field to show Bandwidth Profiles, including corresponding detail configurations for each bandwidth. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 66 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations Single item configuration (Advanced) Different to XML file based configuration, this page provides single item configuration. The contents are showed/applied to running XML file selected in section XML file-

based configuration. The advanced configuration page includes:

DMRS additional position for DL DMRS additional position for UL DL MCS DL QAM table UL MCS UL QAM table Ciphering Algorithm (NEA) Integrity Prot Algorithm (NIA) TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 67 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations Neighbor Cell Configuration You can add 5G NR neighbor cell configuration on this page. Neighbor cell information can be found on the Neighbor Cell CU/DU XML Configuration page. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 68 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations Neighbor Cell Configuration (cont.) This is an example of 5G Serving Cell (gNodeB) and Neighbor Cell (gNodeB) configuration, which are connected to each other via the eth0 Ethernet interface (Xn-

based connectivity). TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 69 Pegatron 5G Outdoor ISC-PS2400 User Guide 10. Software Section WebGUI - CU and DU configurations 10.15. OSS configurations VES configuration for PM/FM operation In the Event API page, configure corresponding VNF Event Streaming (VES) collectors IPv4 address, port and PATH, once ISC connected to VES collector, ISC will report below messages:

1. PNF Registration 2. Heartbeat 3. Fault notification 4. Performance file ready It is supported to choose binding to interface eth0 or eth1 to connect to VES_Collector, refer to Configuration -> Network for interface eth0/eth1 IPv4 setting. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 70 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management 11.1. Fault Management (FM) Alarms Type: Communications Alarms 11. Management - FM Alarm List

PEGA Code Alarm ID Communications Alarms Alarm Object Class Alarm Severity PCI_CONFUSION_DETECTED ALARM_GTPU_PATH_FAILURE PCI_COLLISION_CELL_DETECTED CELL_ALARM_GTPU_PATH_UNSTABLE CU_ALARM_ALL_AMF_COMM_DOWN CELL_ALARM_GTPU_ALL_PATH_FAILURE CELL_ALARM_GTPU_ALL_PATH_UNSTABLE CELL_ALARM_SLEEPING_CELL_DETECTION CELL_ALARM_XNAP_CONNECTION_DOWN 4609 5121 5122 5123 5126 5127 5128 5129 5131 5377 NGC_ALARM_AMF_COMM_DOWN 5378 NGC_ALARM_NG_SETUP_FAILURE 5380 NGC_ALARM_AMF_CONNECTION_UNSTABLE 13313 CELL_ALARM_CELL_ADMIN_LOCKED 301020 1 301011 2 301102 3 301007 4 301103 5 301104 6 301105 7 301106 8 301107 9 301108 10 301008 11 12 301019 13 302013 14 302104 13319 CELL_ALARM_BAND_NOT_SUPPORTED 15 302105 13320 CELL_ALARM_NR_RF_CONFIGURATION_FAILURE 16 302106 302107 17 18 302108 13323 CELL_ALARM_RF_TX_POWER_NOT_CONVERGED 19 302109 13324 CELL_ALARM_CELL_CONFIGURATION_FAILURE 20 302010 13321 CELL_ALARM_RF_TEMPERATURE_CRITICAL 13322 CELL_ALARM_RF_TEMPERATURE_WARNING F1_C_ALARM_F1_C_COMM_DOWN 14081 CRITICAL NGC NRCellCU MINOR NRCellCU MAJOR NRCellCU MINOR CRITICAL NGU CRITICAL NGU MAJOR NGU MAJOR NGU MAJOR XN MAJOR NGC MAJOR NGC NGC MAJOR NRCellDU MAJOR NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL F1C MAJOR Source are from CU. All supports Raising Alarms and Clearning Alarms TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 71 Pegatron 5G Outdoor ISC-PS2400 User Guide Fault Management (FM) Alarms Type: Quality of Service Alarms 11. Management - FM Alarm List

PEGA Code Alarm ID Quality of Service Alarms Alarm Object Class 21 502101 502012 MEMORY_EXCEEDED_90_PERCENTAGE 22 502102 502101 GENERAL_CPU_EXCEEDED_95_PERCENTAGE 23 502103 502102 ISOLATED_CPU_EXCEEDED_95_PERCENTAGE 24 502104 502113 ROOT_FILE_SYSTEM_EXCEEDED_90_PERCENTAGE 25 502105 502114 LOGS_FILE_SYSTEM_EXCEEDED_90_PERCENTAGE system system system system system Alarm Severity CRITICAL CRITICAL CRITICAL CRITICAL CRITICAL Source are from CU. All supports Raising Alarms and Clearning Alarms TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 72 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11.2. Performance Management Performance Management (PM) Counters 11. Management - PM Counter List

KPI Name Performance Management (PM) Counters 1 Accessibility 2 drbPdcpSduVolDl 3 drbPdcpSduVolUl 4 Mobility 5 PRB utilization- DL 6 PRB utilization- UL 7 Retainability 8 Availability RRC.ConnEstabAtt.sum RRC.ConnEstabSucc.sum UECNTX.ConnEstabAtt.sum UECNTX.ConnEstabSucc.sum DRB.EstabAtt.5QI.sum DRB.EstabSucc.5QI.sum DRB.PdcpSduVolumeDL_5QI1~9 DRB.PdcpSduVolumeDL_QCI1~9 DRB.PdcpSduVolumeUl_5QI1~9 DRB.PdcpSduVolumeUl_QCI1~9 MM.HoPrepInterReq MM.HoPrepInterSucc MM.HoExeInterReq MM.HoExeInterReq RRU.PrbUsedDl RRU.PrbAvailDl RRU.PrbUsedUl RRU.PrbAvailUl DRB.RelActNbr.5QI.sum DRB.SessionTime.5QI.sum CellAvailability.Active Source are from CU. All supports Raising Alarms and Clearning Alarms TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 73 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Netconf Server for CM 11.3. Netconf Server for CM Netconf Server for Configuration Management (CM) operations. Its Enable/Disable status is directly associated to AutoRun enabled status in section System, ISC Netconf Server information:

IP: Both eth0 and eth1 interfaces IPv4 can be connected. Port: 832 Account/Password: padmin/Pega@2025, which is directly inherited from Credential setting. Once the NetconfServer is enabled, use a NetconfClient tool (such as netopeer2) to connect to ISC. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 74 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration requirement value example ISC NETCONF XPATH N2 IP N3 IP

<remoteAddress>

5.5.5.19

</remoteAddress>

<remoteAddress>

5.5.5.5

</remoteAddress>

Mobile country code

(MCC)

<MCC>001</MCC>

5GC Mobile network code

(MNC)

<MNC>01</MNC>

Tracking area code

(TAC)

<TAC>1</TAC>

get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

EP_NgC[id=0]/remoteAddress get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

EP_NgU[id=0]/remoteAddress get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

pLMNId/MCC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

NRCellCU[id=0]/plmnInfoList/MCC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/pLMNIdList/MCC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/pLMNIdList get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

pLMNId/MNC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

NRCellCU[id=0]/plmnInfoList/MNC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/pLMNIdList/MNC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/pLMNIdList get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

NRCellCU[id=0]/TAC get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/nRTAC TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 75 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration requirement value example ISC NETCONF XPATH SST (Slice/

Service Type)

<sST>01</sST>

Slices SD (Slice Differentiator)

<sD>00001</sD>

NGC IP address

<localIpAddress>

5.5.5.68

</localIpAddress>

<remoteAddress>

5.5.5.19

</remoteAddress>

get-config --source running

--filter-xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/

NRCellCU[id=0]/plmnInfoList/

sNSSAI/sST get-config --source running

--filter-xpath

/_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/pLMNIdList/

sNSSAIList/sST get-config --source running

--filter-xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/

NRCellCU[id=0]/plmnInfoList/

sNSSAI/sD get-config --source running

--filter-xpath

/_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/pLMNIdList/

sNSSAIList/sD get-config --source running

--filter-xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/

EP_NgC[id=0]/localIpAddress TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 76 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH

<localIpAddress>

5.5.5.68

</localIpAddress>

NGU IP address

<innerSecureLocalIpAddress>

5.5.5.68

</innerSecureLocalIpAddress>

get-config --source running --filter-

xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/

EP_NgU[id=0]/localIpAddress get-config --source running --filter-

xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/platform/

innerSecureLocalIpAddress Basic gNB Settings Configuration Requirement Value Example ISC NETCONF XPATH

<gNBId>0</gNBId>

gNB ID

<gNBId>1</gNBId>

gNodeB

<gNBIdLength>32

</gNBIdLength>

gNB ID length

<gNBIdLength>22

</gNBIdLength>

<gNBIdLength>32

</gNBIdLength>

get-config --source running --filter-

xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/gNBId get-config --source running --filter-

xpath

/_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/gNBId get-config --source running --filter-

xpath

/_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/gNBIdLength get-config --source running --filter-

xpath

/_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/gNBIdLength Release version

<swVersion>3.0

</swVersion>

get-config --source running --filter-

xpath /_3gpp_nr_nrm:ME/swVersion TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 77 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH Encryption algorithm NEA0 |

NEA1 |

NEA2 |

NEA3 NEA0) encAlgo=NEA0 encAlgo1=NEA1 encAlgo2=NEA2 encAlgo3=NEA3 NEA1) encAlgo=NEA1 encAlgo1=NEA0 encAlgo2=NEA2 encAlgo3=NEA3 NEA2) encAlgo=NEA2 encAlgo1=NEA0 encAlgo2=NEA1 encAlgo3=NEA3 NEA3) encAlgo=NEA3 encAlgo1=NEA0 encAlgo2=NEA1 encAlgo3=NEA2 get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

NRCellCU[id=0]/CipheringAlgorithm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 78 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH Integrity algorithm NIA0 |

NIA1 |

NIA2 |

NIA3 NIA0) intAlgo1=NIA0 intAlgo1=NIA1 intAlgo2=NIA2 intAlgo3=NIA3 NIA1) intAlgo1=NIA1 intAlgo1=NIA0 intAlgo2=NIA2 intAlgo3=NIA3 NIA2) intAlgo1=NIA2 intAlgo1=NIA0 intAlgo2=NIA1 intAlgo3=NIA3 NIA3) intAlgo1=NIA3 intAlgo1=NIA0 intAlgo2=NIA1 intAlgo3=NIA2 get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBCUFunction[id=0]/

NRCellCU[id=0]/IntegrityProtAlgorithm TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 79 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH DL MCS table and MCS index dlModulation=

QAM64, QAM256 dlMcs=0~31 UL MCS table and MCS index ulModulation=

QAM64, QAM256 ulMcs: 0~31 4T1R:

dlRank=4 Antenna ports dlNumAntPorts=4 ulRank=1 ulNumOfAntPorts=4 get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/dlModulation get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/dlMcs get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/ulModulation get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/ulMcs get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/dlRank get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/

dlNumAntPorts get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/ulRank get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/macCfgCmn/

ulNumOfAntPorts TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 80 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH TDD time slot pattern DDDSUUDDDD numDlSlot: 3, numDlSymbol: 6, numUlSlot: 2, numUlSymbol: 4, p2Pres: 1, numDlSlotP2: 4, numDlSymbolP2: 0, numUlSlotP2: 0, numUlSymbolP2: 0, prachCfgIdx: 154, DDDDDDDSUU numDlSlot: 7, numDlSymbol: 6, numUlSlot: 2, numUlSymbol: 4, p2Pres: 0, numDlSlotP2: 0, numDlSymbolP2: 0, numUlSlotP2: 0, numUlSymbolP2: 0, prachCfgIdx: 154, DDDSU numDlSlot: 3, numDlSymbol: 10, numUlSlot: 1, numUlSymbol: 2, p2Pres: 0, numDlSlotP2: 0, numDlSymbolP2: 0, numUlSlotP2: 0, numUlSymbolP2: 0, prachCfgIdx: 154, DDDSUU DSUU numDlSlot: 3, numDlSymbol: 6, numUlSlot: 2, numUlSymbol: 4, p2Pres: 1, numDlSlotP2: 1, numDlSymbolP2: 10, numUlSlotP2: 2, numUlSymbolP2: 0, prachCfgIdx: 154, DDSUU numDlSlot: 2, numDlSymbol: 6, numUlSlot: 2, numUlSymbol: 4, p2Pres: 0, numDlSlotP2: 0, numDlSymbolP2: 0, numUlSlotP2: 0, numUlSymbolP2: 0, prachCfgIdx: 154, DSUUU numDlSlot: 1, numDlSymbol: 10, numUlSlot: 3, numUlSymbol: 2, p2Pres: 0, numDlSlotP2: 0, numDlSymbolP2: 0, numUlSlotP2: 0, numUlSymbolP2: 0, prachCfgIdx: 154, DDDSUUUUDD numDlSlot: 3, numDlSymbol: 6, numUlSlot: 4, numUlSymbol: 4, p2Pres: 1, numDlSlotP2: 2, numDlSymbolP2: 0, numUlSlotP2: 0, numUlSymbolP2: 0, prachCfgIdx: 154, DDDSUDDSUU numDlSlot: 3, numDlSymbol: 6, numUlSlot: 1, numUlSymbol: 4, p2Pres: 1, numDlSlotP2: 2, numDlSymbolP2: 6, numUlSlotP2: 2, numUlSymbolP2: 4, prachCfgIdx: 154, DSUUUUDSUU numDlSlot: 1, numDlSymbol: 6, numUlSlot: 4, numUlSymbol: 4, p2Pres: 1, numDlSlotP2: 1, numDlSymbolP2: 10, numUlSlotP2: 2, numUlSymbolP2: 0, prachCfgIdx: 154, DDSUUUDSUU numDlSlot: 2, numDlSymbol: 6, numUlSlot: 3, numUlSymbol: 4, p2Pres: 1, numDlSlotP2: 1, numDlSymbolP2: 10, numUlSlotP2: 2, numUlSymbolP2: 0, prachCfgIdx: 154, get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/numDlSlot get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/

numDlSymbol get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/numUlSlot get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/

numUlSymbol get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/p2Pres get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/

numDlSlotP2 get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/

numDlSymbolP2 get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/

numUlSlotP2 get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/cfgCmn/

numUlSymbolP2 get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/

NRCellDU[id=0]/ulCfgCmn/

ulBwpCfg/rachCfgInfo/rachGenCfg/

prachCfgIdx TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 81 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH Cell Type n78_3500580_100:

nrFreqBand=78 nDlCenterFreq=3500580 nUlCenterFreq=3500580 bSChannelBwDL=100MHZ bSChannelBwUl=100MHZ nDlBw=100 nUlBw=100 numRb=273 carrierBw=273 absFreqPointA=3451440 absArfcnPointA=630096 absFreqSsb=3459360 absArfcnSsb=630624 dlEarfcn=633372 ulEarfcn=633372 arfcnDL=633372 arfcnUL=633372 arfcnSUL=633372 nDlFftSize=4096 nUlFftSize=4096 For others. refer to https://oran-git.pegatroncorp.com/

-/project/886/uploads/

09f5b6ff437d42f3c25652595f5a67e0/

Skynet_Cybernet_Band_and_Frequency __ARFCN_Table__Rev05.xlsx get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/

multiBandInfo[id=0]/nrFreqBand get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulFreqInfo/

multiBandInfo[id=0]/nrFreqBand get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/l1-CfgInfo/nDlCenterFreq get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/l1-CfgInfo/nUlCenterFreq get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/l1-CfgInfo/nDlBw get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/l1-CfgInfo/nUlBw get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/l1-CfgInfo/TxPwrDbm get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/

bSChannelBwDL get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulFreqInfo/

bSChannelBwUl get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlBwpCfg[bwpId=0]/

numRb get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulBwpCfg[bwpId=0]/

numRb get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/

subCarrierCfg[offsetToCarrier=0]/carrierBw get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulFreqInfo/

subCarrierCfg[offsetToCarrier=0]/carrierBw get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/

absFreqPointA get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulFreqInfo/

absFreqPointA get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/

absArfcnPointA get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulFreqInfo/

absArfcnPointA get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/absFreqSsb get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/

absArfcnSsb get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/dlCfgCmn/dlFreqInfo/dlEarfcn get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/ulCfgCmn/ulFreqInfo/ulEarfcn get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/arfcnDL get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/arfcnUL get-config --source running --filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU[id=0]/arfcnSUL TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 82 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Supported Configuration Management (CM) via Netconf Connection Connection with 5GC and CU Configuration Requirement Value Example ISC NETCONF XPATH Cell Id PCI 1 1 get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBCUFunction[id=0]/NRCellCU/id get-config --source running

--filter-xpath /_3gpp_nr_nrm:ME/

GNBDUFunction[id=0]/NRCellDU/id get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/nRPCI get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/pdcchDmrsScramblingID get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/pdschDataScramblingID get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/puschDataScramblingID get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/dmrsDlCfg/scramblingID0Dl get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/dmrsDlCfg/scramblingID1Dl get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/ulCfgCmn/ulBwpCfg/

hoppingId get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/dmrsUlCfg/

transPrecodingDisabledUl/scramblingID0 get-config --source running --filter-xpath

/_3gpp_nr_nrm:ME/GNBDUFunction[id=0]/

NRCellDU[id=0]/dmrsUlCfg/

transPrecodingDisabledUl/scramblingID1 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 83 Pegatron 5G Outdoor ISC-PS2400 User Guide 11.4. Netconf Operation Besides chapter Netconf Server for CM, this chapter also describes other Netconf based operations, including:

reboot lock/unlock cell. Netconf Serves Enable/Disable status is directly associated to AutoRun enabled status in section System. ISC Netconf Server information:

IP: Both eth0 and eth1 interfaces IPv4 can be connected. Port: 832 Account/Password: padmin/Pega@2025, which is directly inherited from Credential setting. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 84 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Netconf Operation 11.5. Netconf Reboot Netconf Client tool uses netopeer2-cli 2.0.69 as a NetconfClient tool.

> connect --host 192.168.0.10 --login padmin --port 832 [email protected] password:

ly WARNING: YANG version 1.1 expects all includes in main module, includes in submodules (_3gpp_nr_nrm_nrcellcu) are not necessary. .. ly WARNING: YANG version 1.1 expects all includes in main module, includes in submodules (_3gpp_nr_nrm_gnbdufunction) are not necessary. ..

> user-rpc --content ./xml/pega_reboot.xml --rpc-timeout 60 OK

> client_loop: send disconnect: Connection reset by peer

pega_reboot.xml:

<system-reboot xmlns=urn:pega:sc-manager:1.0/>

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 85 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Netconf Operation 11.6. Netconf Cell Lock/Unlock Single Cell Example of using netopeer2-cli 2.0.69 as a NetconfClient tool.

> connect --host 192.168.0.10 --login padmin --port 832 The authenticity of the host 192.168.0.10 cannot be established. ssh-rsa key fingerprint is 64:92:aa:9f:e1:01:4e:85:ed:fb:c0:ca:68:c4:58:12:b3:be:7e:d5. Are you sure you want to continue connecting (yes/no)? yes [email protected] password:

ly WARNING: YANG version 1.1 expects all includes in main module, includes in submodules (_3gpp_nr_nrm_nrcellcu) are not necessary. .. ly WARNING: YANG version 1.1 expects all includes in main module, includes in submodules (_3gpp_nr_nrm_gnbdufunction) are not necessary. ..

> edit-config --target running --config=./xml/locked.xml --rpc-timeout 60 OK

> edit-config --target running --config=./xml/unlocked.xml --rpc-timeout 60 OK TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 86 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Cell Lock/Unlock (cont.) Single Cell (cont.) 11. Netconf Operation Example of using netopeer2-cli 2.0.69 as a NetconfClient tool. locked.xml

<ME xmlns=urn:3gpp:tsg:sa5:nrm:ngran operation= modify>

<GNBDUFunction>

<id>0</id>

<NRCellDU operation= modify>

<id>0</id>

<administrativeState operation= modify>Locked</administrativeState>

</NRCellDU>

</GNBDUFunction>

</ME>

unlocked.xml

<ME xmlns=urn:3gpp:tsg:sa5:nrm:ngran operation= modify>

<GNBDUFunction>

<id>0</id>

<NRCellDU operation= modify>

<id>0</id>

<administrativeState operation= modify>Unlocked</administrativeState>

</NRCellDU>

</GNBDUFunction>

</ME>

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 87 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Netconf Operation Multiple Cell Example of using netopeer2-cli 2.0.69 as a NetconfClient tool.

> connect --host 192.168.0.10 --login padmin --port 832 [email protected] password:

ly WARNING: YANG version 1.1 expects all includes in main module, includes in submodules (_3gpp_nr_nrm_nrcellcu) are not necessary. .. ly WARNING: YANG version 1.1 expects all includes in main module, includes in submodules (_3gpp_nr_nrm_gnbdufunction) are not necessary. ..

> edit-config --target running --config=./xml/2cell_locked.xml OK

> edit-config --target running --config=./xml/2cell_unlocked.xml OK

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 88 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 12. Software - Netconf Operation Multiple Cell (cont.) Example of using netopeer2-cli 2.0.69 as a NetconfClient tool. 2cell_locked.xml

<ME xmlns=urn:3gpp:tsg:sa5:nrm:ngran operation= modify>

<GNBDUFunction>

<id>0</id>

<NRCellDU operation= modify>

<id>0</id>

<administrativeState operation= modify>Locked</administrativeState>

</NRCellDU>

<NRCellDU operation= modify>

<id>1</id>

<administrativeState operation= modify>Locked</administrativeState>

</NRCellDU>

</GNBDUFunction>

</ME>

2cell_unlocked.xml

<ME xmlns=urn:3gpp:tsg:sa5:nrm:ngran operation= modify>

<GNBDUFunction>

<id>0</id>

<NRCellDU operation= modify>

<id>0</id>

<administrativeState operation= modify>Unlocked</administrativeState>

</NRCellDU>

<NRCellDU operation= modify>

<id>1</id>

<administrativeState operation= modify>Unlocked</administrativeState>

</NRCellDU>

</GNBDUFunction>

</ME>

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 89 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE PEGATRON Corporation Address: 76 Ligong Street, Beitou District, Taipei City, Taiwan, 11259 Website: 5g.pegatroncorp.com Email:

[email protected]

 

 

Pegatron 5G Outdoor ISC-PS2400 User Guide TAC SST 66 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 67 Pegatron 5G Outdoor ISC-PS2400 User Guide 68 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 70 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management 11.1. Fault Management (FM) Alarms Type: Communications Alarms 11. Management - FM Alarm List

PEGA Code Alarm ID Communications Alarms Alarm Object Class Alarm Severity PCI_CONFUSION_DETECTED ALARM_GTPU_PATH_FAILURE PCI_COLLISION_CELL_DETECTED CELL_ALARM_GTPU_PATH_UNSTABLE CU_ALARM_ALL_AMF_COMM_DOWN CELL_ALARM_GTPU_ALL_PATH_FAILURE CELL_ALARM_GTPU_ALL_PATH_UNSTABLE CELL_ALARM_SLEEPING_CELL_DETECTION CELL_ALARM_XNAP_CONNECTION_DOWN 4609 5121 5122 5123 5126 5127 5128 5129 5131 5377 NGC_ALARM_AMF_COMM_DOWN 5378 NGC_ALARM_NG_SETUP_FAILURE 5380 NGC_ALARM_AMF_CONNECTION_UNSTABLE 13313 CELL_ALARM_CELL_ADMIN_LOCKED 301020 1 301011 2 301102 3 301007 4 301103 5 301104 6 301105 7 301106 8 301107 9 301108 10 301008 11 12 301019 13 302013 14 302104 13319 CELL_ALARM_BAND_NOT_SUPPORTED 15 302105 13320 CELL_ALARM_NR_RF_CONFIGURATION_FAILURE 16 302106 17 302107 18 302108 13323 CELL_ALARM_RF_TX_POWER_NOT_CONVERGED 19 302109 13324 CELL_ALARM_CELL_CONFIGURATION_FAILURE 20 302010 13321 CELL_ALARM_RF_TEMPERATURE_CRITICAL 13322 CELL_ALARM_RF_TEMPERATURE_WARNING F1_C_ALARM_F1_C_COMM_DOWN 14081 CRITICAL NGC NRCellCU MINOR NRCellCU MAJOR NRCellCU MINOR CRITICAL NGU CRITICAL NGU MAJOR NGU MAJOR NGU MAJOR XN MAJOR NGC MAJOR NGC NGC MAJOR NRCellDU MAJOR NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL NRCellDU CRITICAL F1C MAJOR TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 71 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - FM Alarm List Type: Quality of Service Alarms

PEGA Code Alarm ID Quality of Service Alarms Alarm Object Class 502101 502012 MEMORY_EXCEEDED_90_PERCENTAGE 21 22 502102 502101 GENERAL_CPU_EXCEEDED_95_PERCENTAGE 23 502103 502102 ISOLATED_CPU_EXCEEDED_95_PERCENTAGE 24 502104 502113 ROOT_FILE_SYSTEM_EXCEEDED_90_PERCENTAGE 25 502105 502114 LOGS_FILE_SYSTEM_EXCEEDED_90_PERCENTAGE system system system system system Alarm Severity CRITICAL CRITICAL CRITICAL CRITICAL CRITICAL TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 72 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11.2. Performance Management 11. Management - PM Counter List

KPI Name Performance Management (PM) Counters 1 Accessibility 2 drbPdcpSduVolDl 3 drbPdcpSduVolUl 4 Mobility 5 PRB utilization- DL 6 PRB utilization- UL 7 Retainability 8 Availability RRC.ConnEstabAtt.sum RRC.ConnEstabSucc.sum UECNTX.ConnEstabAtt.sum UECNTX.ConnEstabSucc.sum DRB.EstabAtt.5QI.sum DRB.EstabSucc.5QI.sum DRB.PdcpSduVolumeDL_5QI1~9 DRB.PdcpSduVolumeDL_QCI1~9 DRB.PdcpSduVolumeUl_5QI1~9 DRB.PdcpSduVolumeUl_QCI1~9 MM.HoPrepInterReq MM.HoPrepInterSucc MM.HoExeInterReq MM.HoExeInterReq RRU.PrbUsedDl RRU.PrbAvailDl RRU.PrbUsedUl RRU.PrbAvailUl DRB.RelActNbr.5QI.sum DRB.SessionTime.5QI.sum CellAvailability.Active TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 73 11. Management - Netconf Server for CM Pegatron 5G Outdoor ISC-PS2400 User Guide 11.3. Netconf Server for CM ISC Netconf Server information:

Port: 832 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 74 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU requirement value example ISC NETCONF XPATH N2 IP

<remoteAddress>

5.5.5.19 N3 IP

<remoteAddress>

5.5.5.5 5GC Mobile country code Mobile network code Tracking area code TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 75 Pegatron 5G Outdoor ISC-PS2400 User Guide Connection with 5GC and CU 11. Management - Supported CM requirement value example ISC NETCONF XPATH Slices NGC IP address

<localIpAddress>

5.5.5.68

<remoteAddress>

5.5.5.19 76 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU Requirement Value Example ISC NETCONF XPATH

<localIpAddress>

5.5.5.68 xpath NGU IP address

<innerSecureLocalIpAddress>

5.5.5.68 xpath Basic gNB Settings innerSecureLocalIpAddress Requirement Value Example ISC NETCONF XPATH gNB ID xpath xpath gNodeB

<gNBIdLength>32 xpath gNB ID length

<gNBIdLength>22

<gNBIdLength>32 xpath Release version

<swVersion>3.0 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 77 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU Requirement Value Example ISC NETCONF XPATH Encryption algorithm NEA0 |

NEA1 |

NEA2 |

NEA3 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 78 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU Requirement Value Example ISC NETCONF XPATH Integrity algorithm NIA0 |

NIA1 |

NIA2 |

NIA3 TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU Requirement Value Example ISC NETCONF XPATH DL MCS table and MCS index QAM64, QAM256 UL MCS table and MCS index QAM64, QAM256 ulMcs: 0~31 4T1R:

Antenna ports dlNumAntPorts ulNumOfAntPorts TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 80 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide Connection with 5GC and CU 11. Management - Supported CM Requirement Value Example ISC NETCONF XPATH TDD time slot pattern numDlSymbol numUlSymbol numDlSlotP2 numDlSymbolP2 numUlSlotP2 numUlSymbolP2 prachCfgIdx TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 81 Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU Requirement Value Example ISC NETCONF XPATH n78_3500580_100:

Cell Type For others. refer to Skynet_Cybernet_Band_and_Frequency __ARFCN_Table__Rev05.xlsx bSChannelBwDL bSChannelBwUl numRb numRb absFreqPointA absFreqPointA absArfcnPointA absArfcnPointA absArfcnSsb 82 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Management - Supported CM Connection with 5GC and CU Requirement Value Example ISC NETCONF XPATH Cell Id PCI 1 1 hoppingId TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 83 Pegatron 5G Outdoor ISC-PS2400 User Guide 11.4. Netconf Operation ISC Netconf Server information:

Port: 832 84 Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Pegatron 5G Outdoor ISC-PS2400 User Guide 11.5. Netconf Reboot netopeer2-cli 2.0.69 11. Netconf Operation

> connect --host 192.168.0.10 --login padmin --port 832 [email protected] password:

ly WARNING: YANG version 1.1 expects all includes in main module, includes in

... ly WARNING: YANG version 1.1 expects all includes in main module, includes in

OK

> client_loop: send disconnect: Connection reset by peer

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 85 Pegatron 5G Outdoor ISC-PS2400 User Guide 11.6. Netconf Cell Lock/Unlock Single Cell 11. Netconf Operation

> connect --host 192.168.0.10 --login padmin --port 832 The authenticity of the host 192.168.0.10 cannot be established. [email protected] password:

ly WARNING: YANG version 1.1 expects all includes in main module, includes in

... ly WARNING: YANG version 1.1 expects all includes in main module, includes in

OK OK TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 86 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide 11. Netconf Operation locked.xml

<GNBDUFunction>

unlocked.xml

<GNBDUFunction>

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. 87 Pegatron 5G Outdoor ISC-PS2400 User Guide Multiple Cell netopeer2-cli 2.0.69 11. Netconf Operation

> connect --host 192.168.0.10 --login padmin --port 832 [email protected] password:

ly WARNING: YANG version 1.1 expects all includes in main module, includes in

... ly WARNING: YANG version 1.1 expects all includes in main module, includes in

OK

OK

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE 88 Copyright Pegatron corporation 2026. All rights reserved. Pegatron 5G Outdoor ISC-PS2400 User Guide netopeer2-cli 2.0.69 2cell_locked.xml

<GNBDUFunction>

12. Software - Netconf Operation 2cell_unlocked.xml

<GNBDUFunction>

TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE Copyright Pegatron corporation 2026. All rights reserved. TOC 2 DOC 3 SPEC 4 PACK 4 ANT 4 KIT POLE 4 KIT WALL 5 PORT 5 LED 6 ANT SPEC 7 INST REQ 7 WALL FIX 7 POLE FIX 7 GND 7 ANT CONN 8 CONN TAPE 9 CON NECT 10 FW UP 10 WEB GUI 10 FW UP 2 11 MAN AGE PEGATRON Corporation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

v PEGATRON | SIN: 1909000000000000 Cee Product / #8 : 5G Integrated Small Cell / (UL)us is subject to the following two 5G Ses conditions: (1) This device may Model / 245% : PS2400-4832 not cause harmful interference, Input / A : 48Vdc, 4.17A Max MAC: XX: Pes USTED and (2) This device must accept any interference FCC ID : VUIPS2400-48 317539 NNN received, including interference that may cause Factory ID : F9 BEITOU DISTRICT, TAIPEI CITY 113, TAIWAN Made in Talwan 8808 PEGATRON |

Product / #42: 5G Integrated Small Cell /

1G 1 \ Bea Model / 325% : PS2400-4816 v

' This device complies with Part 45 of the FCC Rules. Operation

(UL)us is subject tothe following two conditions: (1) This device may not cause harmful interference, Input / 8A : 48Vdc,4.17AMax = MAC: XX:XX:XX:XX:XX:XX IP6 5 USTED and (2) This device must accept any interference FCC ID : VUIPS2400-48 317539 NNN received, including interference that may cause Factory ID : F9 BEITOU DISTRICT, TAIPEI CITY 113, TAIWAN Made in Taiwan 88

 

 

PEGATRON CORPORATION 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, TAIWAN PROFESSIONAL INSTALLATION ATTESTATION Date: 2026-08-31 FCC ID: VUIPS2400-48 We, PEGATRON CORPORATION hereby declare that requirements of KDB 353028 DO1 Antennas Part 15 Transmitters v01 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: Device is Outdoor 5G NR FR1 4T4R Small Cell and must need special trained professional in configuring and installing the product, more details please refer to user manual exhibit. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna specified as below. Description: Below listed of Antennas has been compliance FCC Rule Part 15 requirement, more details please refer to test reports. Antenna 1 (Brand: PEGATRON, Model: WA-P-S6G3-05-003) Frequency Range Ant 1 Gain (dBi) Ant 2 Gain (dBi) | Ant 3 Gain (dBi) | Ant 4 Gain (dBi) 3500 13.2 13.4 13.2 13.8 3600 13.1 13.7 13.2 13.5 3700 13.8 13.9 13.9 13.8 Antenna 2 (Brand: PULSE, Model: BTEA0020133G8S6A01 ) Frequency Range Ant 1 Gain (dBi) Ant 2 Gain (dBi) | Ant 3 Gain (dBi) | Ant 4 Gain (dBi) 3300 12.22 12.96 12.17 12.95 3550 12.3 13.31 12.34 13.33 3750 12.07 13.01 12.01 13.03 Antenna 3 (Brand: WHAYU, Model: 2F04X6B) Frequency Range Ant 1 Gain (dBi) Ant 2 Gain (dBi) | Ant 3 Gain (dBi) | Ant 4 Gain (dBi) 3300~3800 13.5 13.5 13.5 13.5 3. The applicant should address the following items when justifying professional installation.

(1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer. PEGATRON CORPORATION 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, TAIWAN

(2) Marketing Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only.

(3) Applicant must show that device intended use is not for consumers and general public. Description: Device is for industrial/commercial use.

(4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer?

Description: The Outdoor 5G NR FR1 4T4R Small Cell is a carrier-grade system. It is highly complex and unique because setup requires specialized RF test equipment and proprietary software to calibrate frequency synchronization, output power, and antenna down-tilt. Furthermore, proper deployment involves strict compliance with FCC RF exposure (MPE) limits, industrial-grade high-altitude mounting, and lightning protection grounding. Improper installation poses severe risks of co-channel network interference and public safety hazards. Therefore, this equipment cannot be configured by general consumers and strictly REQUIRES installation by certified telecom professionals. 4. Other professional installation requirements

(1) Installation must be controlled. Description: The product will be distributed through controlled distribution channel which has special trained professional to install this product

(2) Installed by licensed professionals. Description: Device sold to dealer who hires installers and need special trained professional in configuring and installing the product.

(3) Installation requires special training. Description: The product need special programming, access to keypad, field strength measurements made, so must need special trained professional in configuring and installing the product. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Nancy Yu, Senior Manager PEGATRON CORPORATION Tel: '+886.2.8143.9001 #34182 Fax: 886-2-28960017 E-mail: [email protected]

 

 

PEGATRON CORPORATION 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, TAIWAN Date: 2026-08-31 FCC ID: VUIPS2400-48 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part _2.911(d)(5)(i) Fili PEGATRON CORPORATION certifies that the equipment for which authorization is sought is not covered equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5 PEGATRON CORPORATION certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely yours, Nancy Yu, Senior Managr PEGATRON CORPORATI Tel: '+886.2.8143.9001 #34182 Fax: 886-2-28960017 E-mail: [email protected]

 

 

PEGATRON Corporation SF., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY, TAIWAN 11259 Tel: +886 281439001; FAX: +886 228960017 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, PEGATRON Corporation, Grantee Code VUI, FRN 0020241758 (the applicant) certifies that, as of the date of the filing of application, [Pegatron USA, Inc.] (the agent) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address, email for the designated agent are:

Physical U.S. address: [3025 Stender Way, Santa Clara, CA 95054 United States]

Email: [[email protected]]

FRN: [0032549305]

The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent Bob Chen Name: Nancy; Yu Name: Bob Chen Title: Senior Manager Title: Field Application Engineer Email: [email protected] Email: [email protected] TEL: +886-2-81439001 #34182 TEL: (510) 557-0112 Date: September 3, 2026 Date: September 3, 2026

 

 

PEGATRON CORPORATION 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, TAIWAN Date: 2026-08-31 FCC ID: VUIPS2400-48 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics Block Diagram Operational Description Parts List Tune-Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Nancy Yu, Senior/Manage PEGATRON CORPORATION Tel: '+886.2.8143.9001 #34182 Fax: 886-2-28960017 E-mail: [email protected]

 

 

PEGATRON CORPORATION SF., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, TAIWAN Date: 2026-08-31 FCC ID: VUIPS2400-48 AUTHORIZATION LETTER To Whom It May Concern:

PEGATRON CORPORATION hereby authorizes Andrea Hsia / Assistant Manager of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission

(FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Assistant Manager of BV CPS Taoyuan on PEGATRON CORPORATIONs behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, Nancy Yu, ior Manager PEGATRONCORPORATION Tel: '+886.2.8143.9001 #34182 Fax: 886-2-28960017 E-mail: [email protected] g