Quick Operation Guide Tire Pressure Monitoring System
(TPMS) Picolink Model No.: P12x Technical Support Push Reset button, can recover the preset status For downloading the manual and more information, please visit http://www.picolink.com.tw TPMS Warranty Card Model No. P12x Serial No. Purchase Date Agent Signature Y M D Packing Contents Display Explanation Parts Photo Q`TY Parts Photo Q`TY Display Unit Display Unit Stand 3M VHB Tapes CR1632 Battery Antithreft Screw Wrench Double Head Wrench 1 1 Power Cable
(P122) Power Cable
(P121) 1 Transmitter 4 Packing Nut Single Head Wrench 1 1 1 1 4 4 1 1 Bad Signal Battery/Generator Tire-leaking Battery/Genera tor Voltage Tire Pressure Normal Tire Transmitter Low-Voltage Warning Temperature Unit Abnormal Tire Tire Pressure &
Temperature 1. Transmitter Installation Position Explanation No.4 = Left Front (LF) ; No.1 = Right Front (RF) No.3 = Left Rear (LR) ; No.2 = Right Rear (RR) a. Put CR1632 battery into the No.1 (RF) transmitter. No.4 LF No.1 RF No.3 LR No.2 RR b. Use double head wrench
(bigger end) to tighten the plastic cover. c. Loosen the valve cap and put the packing nut in. d. Lock No.1 transmitter to the right front tire valve and tighten it. e. Use single head wrench and double head wrench to tighten them again. f. Use anti-theft screw wrench to tighten the screw. g. In turns to proceed No. 2 -> 3 -> 4 transmitter and repeat the action from a to f. To finish all the transmitter installation. 2. Receiver Installation a. Install display and its stand b. Use 3M VHB tapes to paste the stand to the position you choose at the console. c. Plug the power cable with micro-USB beside the receiver. e. Adjust the right angle of the stand in order not to influence the driving. Finish the installation and start using this TPMS. d. (Model No.: P122) Put the car charger connecter into the its socket. Note: (Model No.: P121) Put the red wire of the power cable with fuse box and the black wire with the ground. 3. System Specification a. Receiver Specification Operation Voltage Channel Quantity Demodulation DC 5V 1 channel FSK Storage Temp.
-40 ~ +125 Operation Temp.
-25 ~ +75 Weight Dimension 70 g 85*55*14 (mm) b. Transmitter Specification Operation Voltage Channel Quantity Modulation Occupied BW Frequency RF power DC 3V 1 channel FSK Max. 1MHz 433.92 MHz Max. 80 dBV/m Storage Temp.
-40 ~ +85 Operation Temp.
-30 ~ +85 Pressure Range Pressure Accuracy Temp. Accuracy Battery Life Weight 0~80 psi 1 psi 4 1~2 years 9 g 1 g Dimension
(D)21.9*(H)20.2 (mm)