K80 Professional LED Photography Light Instruction Manual Overview Before using this product, you must read the manual and fully understand how to use it and ensure that you can easily handle the operation method and also use it properly. Product Introduction This LED light is controlled by MCU. Everything shows on the display like the status, output power, power adjustment, single color temperature 5600K,Safety to isolate power supplied by DC voltage. This LED light can use the recorder battery which is more convenience to use for outdoor shooting. Internal temperature protects circuit and heat reduces system. Specification Model Input Power Output Power Lumen Adjust Range Color Rendering Index Color Temperature Temperature Protect Battery LED Life Dimension Net Weight K80 AC:110-240V 50/60Hz DC: 14-18V 5A 40W 4500LM P1-P100 SteplessAdjust CRI>95 5600K Yes 2x NP-F Lithium Battery 50,000 Hrs 24.9x24.1x5.5CM 1.3KG Name of Parts Reector Reector Holding Point L bottom LED Beans 1.Lithium Battery clip 2.Power Switch
(Adapter Supply/Off/
Battery Supply) 3.Group Setting w w w
. p i x e l h k
. c o w w w
. pi x e l h k
. c o 4.Quick Brightness Adjust Heat Reduce Holes 5.Display 6. Channel Setting 7.Adaptor Socket 8.Brightness Adjust 9.Control Mode Front Side Operate Instruction 1.Turn On:
1 Battery Supply: Please install battery on the lithium battery clip. Press the battery icon power switch to Rear Side turn on the LED light. 2 Adaptor Supply: Please plug the DC adaptor to the adaptor socket, then adaptor cable connect to 110v 60Hz or 220V 50Hz.Press to adaptor icon power switch to turn on the LED light. Caution: After turned on the power,the light keeps all the setting as last power on status. 1 Dim the brightness adjust dial to change the light power.Display will show the existing light power and adjust range in 1%-100%. 2 Press the quick brightness adjust button. Recycle to change to power between 1%,25%50%,75% and 100%. Caution: The rst press this button will go to the closest power level base on the existing power. Caution:
Adjust one of the LED light power, the power will sync to the other LED light which under the same channel and group. 3.Channel and Group Setting:
1 Press Channel Setting Button[ CH ], CH on display will ash, then rotate the channel adjust button to change the channel between CH01- CH48. Press the channel setting button or wait for 4sec to conrm the channel. 2 Press Group Setting [ GP ] change to the next group, total A,B,C,D,E,F groups and display shows the existing group. When switching to the different group, the LED will also change the setting base on the new group 1)This light can be set between 1- 48 channel, no interference if the lights in different channel. 2)This light can be set between A.B.C.D.E.F. group, each group can have a lot of lights. 3)To control the lights in the same group, you have to set in the same channel rst. Caution: Adjust one of the LED light power, the power will sync to the other LED light which under the same channel and group. 4.Wireless Control:
1 Make sure the master and slave light in the same channel. 2 Brightness adjust in the same group. adjust any light under the same group, the other light under the same group and same channel will adjust too. 3 Brightness adjust in the different group. Enter to control mode: Press the control mode button the existing group icon on display will ash. Press group setting buttonGPswitch to the group that you want to control. You can adjust the brightness during the group icon keep ashing. This master light setting will not effect. Press again control mode button or wait for 4sec to exit the control mode. 5.Turn off the light power will keep the existing setting, turn on the light again in the next time; all the setting will be the same. Caution 1.Do NOT put the light under high temperature and high humidity area. 2..Do NOT put the light in water or use under raining. 3.Caution when using battery:
1 Do NOT throw the battery in fire or increase the temperature. 2 When use all the battery power, the battery easily to leak. To avoid this case, please take out the battery from the product when long time not using the product. Package included Series 1 2 3 Name LED Light Input Power Cable Adaptor Qty 1PC 1PC 1PC Series 4 5 6 Name Color Filter Manual Warranty Card Qty 1PC 1PC 1PC Thank you for choosing Pixel Enterprise Limited productand read this user manual. Should you have any questions, please contact the local dealer or visit our website:http://www.pixelhk.com 2.Brightness Adjust :
PK1459 V01.01 FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving an Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. tenna.
