Voyager 835 Voyager 835 Voyager 835 Bluetooth headset Bluetooth headset Bluetooth headset quickstart guide quickstart guide quickstart guide SAFETY INFORMATION SAFETY INFORMATION GETTING STARTED Note: Please read this information before you use the headset. Electronics Devices To avoid electromagnetic interference, please turn off the headset in any place where posted notices instruct you to do so. Note: Most modern electronic devices are susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electro-
magnetic compatibility. Aircraft Turn off the headset when on board an aircraft. The use of this headset might interfere with the electrical system of an aircraft. Medical Instruments If you use a medical device, such as a pacemaker, consult the manufacturer of your medical device to determine if it is adequately shielded from electromag-
netic interference. Your physician can assist you in obtaining this information. Power Adapter Only use the supplied power adapter with the headset. Placement You are advised to put the headset in a safe place where it will not be bent or crushed when not in use otherwise it may bring harm to human body. Children Keep the headset away from children. Some small or detachable parts might be swallowed and result in harm. Repair or Service Any attempt to modify or remove of any part of the headset will void the warranty. GENERAL DESCRIPTIONS Voyager 835 is an ear clip type Bluetooth-enabled, wireless hands-free headset, which compiles with the Bluetooth V2.0+EDR specification and supports the Headset Profile, Hands-free Profile. Identifying parts 1 4 2 5 3 8 7 6 1. Multi-Function Button 3. Volume Button 5. Charging interface 7. Earbud 2. Microphone 1 4. Indicator Light 6. Microphone 2 8. Adjustable Ear Loop Adjusting the headset for comfort The lightweight Voyager 835 can be worn comfortably on either ear. Adjust the headset according to the following figures. GETTING STARTED GETTING STARTED GETTING STARTED THE FUNCTION AT A GLANCE Charging the built-in battery Voyager 835 has a built-in battery, which must be charged fully before using the headset. Charging takes about 2 hours. You can charge the headset through the AC adapter. Using USB charging adapter Note:
1. When you use Voyager 835 for the first time, please assure to charge it over 2 hours until it is full charged. 2. When Red LED flashes 300ms every 10000ms with alert tone, Voyager 835 is in low battery, please charge it. 3. The power source can be only connected to SELV circuit and complies with limited power source. 4. The external power adaptors listed below are in compliance with limited power source. Vendor UK US EU CHINA AU/NZ KOREA MEXICO Speedytech 7501SD-5018A-UK 7501SD-5018A-UL 7501SD-5018A-EU 7501SD-5018A-CCC 7501SD-5018A-SAA 7501SD-5018A-EK 7501SD-5018A-UL Sunstrong SB050018 SV050018 SU050018
THE FUNCTION AT A GLANCE In this guide, Short key press refers to a time period of less than 0.8 s during which functional button is being pressed. Double key press refers to a time period of less than 0.5 s between two Short key press. Medium key press refers to a time period of holding the key down more than 2 s. Long key press refers to a time period of holding the key down more than 4 s. Very long key press refers to a time period of holding the key down more than 6 s. Phone operation Pairing the headset with a phone Before you can use the headset to make calls, you must pair the headset with your phone. Pairing creates a secure link between your phone and the unique ID of the headset. You only have to pair devices once.
(1) To put the headset in pairing mode, press and hold
(more than 6 seconds) the Multi-function button until the LED flash red/blue.
(2) Scroll to the Bluetooth menu in you phone and search for active devices. (Refer to you phone's user manual for details)
(3) When the search completes, a list of devices found is displayed. Voyager 835 Voyager 835
(4) Select Voyager 835 and when prompted input the default passkey (0000). When successfully paired, the red/blue LED flash alternately on the headset changes to steady blue for 1s then no light on. wearing on left ear wearing on right ear adjust the earloop Note: You can adjust the ear-clip angle for comfort , but please be careful in not to break the clip. Status LED Headset state Power on Power off Pairing Successful Pairing Unsuccessful Pairing Ongoing Call Low battery Missed call Press of MFB, Vol +/-
in ongoing call Charging LED color and status Steady Blue LED for 500 ms Steady Red LED for 500 ms Blue LED & Red LED flash 200 ms alternately Steady Blue LED for 1000 ms Steady Red LED for 1000 ms Blue LED flashes 100 ms every 1600 ms Red LED flashes 300 ms every 10000 ms Blue and Red LED flashed 50 ms together every 10000 ms Steady Blue LED for 50 ms Red LED on THE FUNCTION AT A GLANCE THE FUNCTION AT A GLANCE THE FUNCTION AT A GLANCE THE FUNCTION AT A GLANCE Phone functions at glance Make internet phone calls
(4) Type in the passkey (0000) and click OK (fig 3).
(8) A registration confirmation screen appears, Click Finish to complete the connection. The new connection is shown in the Bluetooth Settings window (fig 6).
(9) Right-click the headset icon and click Connect (fig 7). Button Medium key press multi-function button Long key press multi-function button Very long key press multi-function button Short key press multi-function button Medium key press multi-function button Short key press multi-function button There are many internet phone services (VoIP) that let you make calls from your computer. You must add a new connection for this function.
(1) To put the headset in pairing mode, press and hold
(more than 6 seconds) Multi-function button until the LED flashes red/blue.
(2) Right-click the Bluetooth Manager icon in the system tray and click Add New Connection (fig 1).
(5) Under Service Class, select headset and click Next (fig 4).
(6) When you hear a signal tone on the headset, short-
press Multi-function button (fig 5).
(7) Click Next. Power on Headset state Power off Power off Any state Pairing Power off Incoming call Incoming call Ongoing call Answer incoming call Reject incoming call End a call Volume+
Volume-
Voice divert between headset and phone Voice dialing Ongoing call Short key press volume + button Ongoing call Short key press volume - button Ongoing call Medium key press multi-function button Connected Redial Standby Cancel calling out Calling out Press multi-function button until a tone appears and then voice dialing Double key press multi-function button Short key press multi-function button
(fig 1)
(fig 2)
(3) Select the Custom Mode radio button and click Next. The wizard searches for device and the following screen appears, select the Voyager 835 and click Next (fig 2).
(fig 4-1)
(fig 3)
(fig 4-2)
(fig 5)
(fig 6)
(fig 7-2)
(fig 7-1)
(fig 8) THE FUNCTION AT A GLANCE
(10) When you hear a single tone on the headset, short-
press Multi-function button. Once connected the icon changes to a handshake (fig 8). Now you can make an internet phone call by using Voyager 835. Note: The headset only controls volume, Use the Skype interface for all call functions. SPECIFICATIONS Battery capacity Talk time Standby time Weight Size 135 mAh up to 5 hours up to 100 hours 11.5 g 53.7 * 23.8 * 16.7 mm FCC RF RADIATION EXPOSURE STATEMENT Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC RF RADIATION EXPOSURE STATEMENT 15.105 (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techni cian for help. Canada and USA Regulatory Information:
Operation is subject to the following two conditions:
(1) this device may not cause interference and
(2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. TECHNICAL ASSISTANCE EXPOSURE TO RF RADIATION Visit our Web site at www.plantronics.com/support for technical support including frequently asked questions, compat-
ibility and accessibility information. The Plantronics Technical Assistance Centre (TAC) is also ready to assist you on 0800 410014 from the UK. The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Indepen-
dent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. Note: Modifications not expressly approved by Plantronics, Inc. could void the user's authority to operate the equipment. MODEL AND COUNTRY INFORMATION 37677-04 37677-05 GBR AUT, BEL, DEU, DNK, ESP, FRA, GRC, ITA, IRL, LUX, NLD, PRT, SWE, FIN, CYP, CZE, EST, HUN, LVA, LTU, MLT, POL, SVK, SVN. WARNINGS Do not use headphones/headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. Plantronics Ltd Interface Business Park Bincknoll Lane Wootton Bassett Wiltshire SN4 8QQ, ENGLAND Tel: 0800 410 014 Plantronics GmbH Hrth, Deutschland Tel: 0800 9323400 sterreich: 0800 242 500 Schweiz: 0800 932 340 Nordic Region Tel: Finland: 0800 117 095 Tel: Sverige: 02002 14681 Tel: Danmark: 8088 4610 Tel: Norge: 800 113 36 Plantronics B.V. Hoofddorp, Nederland Tel: 0800 752 6876 (NL) 00800 752 687 66
(BE/LUX) Plantronics Sarl Noisy-le-Grand, France No Indigo: 0825 082599 0 , 15 4 TTC / mn
+33 14167 4141 Plantronics Acoustics Italia Srl Milano, Italia Numero Verde: 800 950 934 Plantronics Iberia, S.L. Madrid, Espaa Tel: 902 415 191
+34 91 640 47 44 (ES) Tel: 800 844 517 (PT) Plantronics Middle East, Eastern Europe, and Africa Tel: +44 1793 842 443 Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 USA Tel: 1 831 426 5868 Plantronics Inc. MODEL: Voyager 835 Rating: 5 V ===, 180 mA 3115593 CONFORMS TO ANSI/UL STD. 60950-1 CERTIFIED TO CAN/CSA STD. C22.2 NO. 60950-1 Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most regions. 2006 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Sound Innovation and Pulsar are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. Patents Pending. Printed in USA. (05-06)