GET PAIRED The rst time you power on your headphones, the pairing process begins. 1 Slide the power switch on. You hear "pairing" and the LEDs ash red and blue. 2 Activate Bluetooth on your phone and set it to search for new devices.
iPhone Settings > Bluetooth > On*
Android Settings > On > Scan for devices*
*Menus may vary by device. 3 Select PLT_SLB. If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear pairing successful and the LEDs stop ashing. HEADPHONE OVERVIEW
([ ]) button. Play/pause music Tap the Play/pause Volume Rotate the volume wheel backward () to control the volume. Track selection Tap the Forward button control the track selection. Open mic Tap the red button to hear your natural surroundings. or Back button forward (+) or Voice dial (smartphone) If your smartphone has a voice-enabled assistant, press and hold the Call button and wait for the phone prompt. Answer a call Choose:
for 3 seconds to
Put on the headset to answer call, or
Tap the Call button Mute During a call, press the red button. You hear
"mute on/o." While muted, taking o the headphones transfers the call to your phone. Call back last call (smartphone) To dial your last number you dialed, double-tap the Call button. End a call Tap the Call button Decline a call Press and hold the Call to end current call. button for 2 seconds. CHARGE It takes up to 2 hours to fully charge your headphones. The LEDs turn o once charging is complete. ADJUST THE FIT Adjust the headphones for a comfortable t. Lengthen or shorten the band until it ts comfortably.
=
=
=
=
=
Tip: To check the headphones battery status, tap the Call while wearing your headphones. Headphones button must be in idle state. Your headphones have up to 12 hours of listening time. NEED MORE HELP?
Read the guides for setup, use and safety. For more help, dont return to the store; nd a local phone support number at plantronics.com/support. PAIR SECOND DEVICE 1 Slide and hold the power button towards the Bluetooth icon until the LEDs ash red and blue. 2 Activate Bluetooth on your second device and follow steps 2 and step 3 in "Get Paired."
2014 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. iPhone is a trademark of Apple, Inc. All other trademarks are the property of their respective owners. Patents: U.S. 5,712,453; 7,039,179; Patents pending. 200462-XX 11.14 MODEL ID: PITE14 USE SENSORS Smart sensors respond when you put on or take o your headphones. Putting on your headphones will:
Resume music
Answer a call Taking off your headphones will:
Pause music (while music is playing)
Transfer active call to phone Disable sensors To disable the sensors, hold both the Mute and buttons for more than 6 seconds until the Call LED ashes purple then red. Repeat to reactivate;
the LED ashes purple then blue. HYBRID_MODE When the battery is exhausted use your headphones with the provided 3.5 mm Apple cable. Use the cable to:
Adjust the volume with the (+) and () buttons.
Play/pause music or answer/end a call with the button = single tap ENABLE HD VOICE To enable HD voice (wideband), hold both the red buttons for more than button and Play/pause 6 seconds until the LEDs ashes purple. Repeat to disable. HD voice functions properly when both devices support it.
Track forward with the
Track backward with the
Activate Siri with the button = double tap button = triple tap button = 3 second press PAIR TO MAC If your Mac is Bluetooth-enabled, you can pair your headset to it. 1 Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). 2 On you mac, choose Apple menu > System Preferences. 3 Click Set Up New Device (+), select "PLT_SLB" and follow the onscreen instructions. CUSTOMIZE You can change the language and other settings by downloading Plantronics Hub for Windows and Mac at plantronics.com/software. You can also download the free mobile apps Plantronics Hub for iOS and Android. Plantronics Hub enables you to:
Change language (Plantronics Hub for Windows and Mac only)
Receive rmware updates (Plantronics Hub for Windows and Mac only)
Turn "mute o" voice alert on/o
Turn smart sensors on/o GET STARTED SUBLIME Designed in Santa Cruz, California FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. The measured SAR levels evaluated are in compliance with the FCC RF exposure guidelines. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. NCC
,,,,
,,
,,
,