companies    

FCC ID: 2AOW7-K001 CCU-2

by: Polaris Industries Inc. latest update: 2020-02-19 model: K001

Four grants have been issued under this FCC ID from 12/11/2019 to 02/19/2020 (this is one of three releases in 2020 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked warrantee terms, instructions, troubleshooting guides, password defaults, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
photos label
app s submitted / available
1 2 3 4 Internal Photos Internal Photos pdf 256.44 KiB February 19 2020
1 2 3 4 External Photos External Photos pdf 199.83 KiB February 19 2020
1 2 3 4 ID label ID Label/Location Info pdf 22.19 KiB November 12 2019
1 2 3 4 Antenna Info Operational Description pdf 413.91 KiB February 19 2020
1 2 3 4 Cover Letter Cover Letter(s) pdf 162.15 KiB February 19 2020
1 2 3 4 Operational Description Operational Description pdf 161.47 KiB February 19 2020
1 2 3 4 Test Report Test Report pdf 1.74 MiB February 19 2020
1 2 3 4 Test Setup Photos Test Setup Photos pdf 1.01 MiB February 19 2020
1 2 3 4 Internal Photos Internal Photos pdf 256.44 KiB February 19 2020
1 2 3 4 External Photos External Photos pdf 199.83 KiB February 19 2020
1 2 3 4 ID label ID Label/Location Info pdf 22.19 KiB November 12 2019
1 2 3 4 Antenna Info Operational Description pdf 413.91 KiB February 19 2020
1 2 3 4 Cover Letter Cover Letter(s) pdf 162.15 KiB February 19 2020
1 2 3 4 Operational Description Operational Description pdf 161.47 KiB February 19 2020
1 2 3 4 Test Report Test Report pdf 1.74 MiB February 19 2020
1 2 3 4 Test Setup Photos Test Setup Photos pdf 1.01 MiB February 19 2020

frequency equipment class purpose
1 2020-02-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 2422 ~ 2452 DTS - Digital Transmission System
3 2019-12-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
4 2422 ~ 2452 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 4 Effective 2020-02-19
1 2 3 4 2019-12-11
1 2 3 4 Applicant's complete, legal business name Polaris Industries Inc.
1 2 3 4 FCC Registration Number (FRN) 0027172253
1 2 3 4 Physical Address 1600 SE 18th Ave
1 2 3 4 Battle Ground
1 2 3 4 United States
app s TCB Information
1 2 3 4 TCB Application Email Address g******@element.com
1 2 3 4 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 Grantee Code 2AOW7
1 2 3 4 Equipment Product Code K001
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 Name K****** S****
1 2 3 4 Title Engineering Manager
1 2 3 4 Telephone Number 360-6********
1 2 3 4 Fax Number 360-6********
1 2 3 4 E-mail k******@polaris.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 DTS - Digital Transmission System
1 2 3 4 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)CCU-2
1 2 3 4 KTM CCU
1 2 3 4 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 Modular Equipment TypeLimited Single Modular Approval
1 2 3 4 Single Modular Approval
1 2 3 4 Purpose / Application is forClass II Permissive Change
1 2 3 4 Change in Identification
1 2 3 4 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 Grant CommentsSingle Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This C2PC is to authorize a specific host device configuration as a Limited Single Modular approval that results when this module is installed in the grantees Connectivity Control Unit, Model CCU-2. In this configuration, channel bandwidth is limited to 20 MHz for the DTS 2412 2462 MHz band. Additionally, the conducted output power is limited to 0.0081 W for the DTS 2412 2462 MHz band; 0.0025 W for the DTS 2402 2480 MHz band; and 0.0036 W for the DSS 2402 2480 MHz band.
1 2 3 4 Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This C2PC is to authorize a specific host device configuration as a Limited Single Modular approval that results when this module is installed in the grantees Connectivity Control Unit, Model CCU-2. In this configuration, channel bandwidth is limited to 20 MHz for the DTS 2412 2462 MHz band. Additionally, the conducted output power is limited to 0.0081 W for the DTS 2412 2462 MHz band; 0.0025 W for the DTS 2402 2480 MHz band; and 0.0036 W for the DSS 2402 2480 MHz band.
1 2 3 4 Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
1 2 3 4 Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
1 2 3 4 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 Firm Name Element Materials Technology
1 2 3 4 Sporton International Inc.
1 2 3 4 Name R**** W******
1 2 3 4 A******** C********
1 2 3 4 Telephone Number 503-8********
1 2 3 4 88633********
1 2 3 4 Fax Number 503-8********
1 2 3 4 +886-********
1 2 3 4 E-mail r******@element.com
1 2 3 4 a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0173000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2402 2480 0.01
2 2 15C CC MO 2412 2462 0.2348
2 3 15C CC MO 2422 2452 0.1052
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0173000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC MO 2402 2480 0.01
4 2 15C CC MO 2412 2462 0.2348
4 3 15C CC MO 2422 2452 0.1052

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC