FCC ID: DYFCV100T 433MHz Transmitter

THE FEATURE ORIENTED PHONE SYSTEM FOR EVERY HOME With exclusive Emergency Help System you can Call-4-Help with a press of a button Hear who is calling before you decide to answer an incoming phone call*

Answer your phone and speak hands-free even if you cant get to the phone**

USER MANUAL ClearVoice 50 B ClearVoice 100 B ClearVoice 200 B CALL BACK REPEAT NEW VOICE AM PM CALL#

CLIP DELETE SCROLL 1 4GHI 7PQRS ABC2 2 JKL5 8TUV 0 3DEF 6MNO 9WXYZ

MENU CLIP EXIT FLASH HOLD REDIAL LOUD SPEAKER A Quality Of Life Product TM LOUD LOW HANDSET Consumer Helpline 1-888-558-7420 Patents Pending TABLE OF CONTENTS Important Safety Instructions ...................................................................................................................................2 Safety Instruction for Batteries ......................................................................................................................................2 Installation Instructions .................................................................................................................................................2 Important Notes .............................................................................................................................................................3 FCC Wants You to Know............................................................................................................................................3 Service ...........................................................................................................................................................................4 General Information ....................................................................................................................................................4 About Your Unit............................................................................................................................................................4 Location of Controls .....................................................................................................................................................5 Installation ... 6-7 Where to install this feature oriented telephone/ Installing batteries/ To replace the battery of the Remote . Pendant/ choose your location/Connecting the ClearVoice 50B,100B or 200B/ Wall mounting/

Special Highlight Features....................................................................... ..........................8 Using features of your telephone that do not need programming ... 9-10 Ringer Volume control/ Handset Volume Control/Tone receiving Adjustment/Dialing a Call/ Pre/dialing a Call/

Receiving a Call/Receiving a Call/Remote Speakerphone (ClearVoice 100B and 200B)/Speaker Volume Control/Redial/Pause/ Hold/ Flash/ Hearing Aid Compatibility Setting Up to use the programmable features of your telephone 10-16 Setting the LCD contrast / Setting the Time and Date /Store Numbers to Phone Book and Name Recording for Phone BookEntering Emergency telephone numbers and names/Entering General Telephone Numbers and Names/Name Recording for Phone Book/T record a voice name to a telephone # in the Phone Book/To Record Emergency Message/Check Emergency Message/

Setting the Tone-Pulse /Setting the Ringer Tone/Setting the Language/Setting the Voice ON-

OFF/Recording/Editing/Deleting voice prompt of name in Phone Book/To edit the Phone Book Memory/To delet the Phone Book Memory/To review the Phone Book Memory Important: Your ClearVoice unit is already has the Tone-Pulse preset to Tone, and the language is preset to English Using the Emergency Features ..............................................16-19 Emergency Help System / Emergency Message / To delete your own emergency message and revert to the pre-recorded message/To Dial and check an entered and displayed emergency telephone number from the Phone Book/Important Information about ClearVoice 200B Emergency Help System/Checking the range of the Dual Wireless Pendant/To Activate the Emergency Help System if an Emergency Occurs/ To Store a Number in hotkey The Caller ID ........................................................................................................................................19-21 Receiving a Call (the telephone can store up to 64 calls) / Viewing the Caller ID Memory / Erase the Caller ID Memory / Call Back (Redial) from the Caller ID Memory / Copy from the Caller ID to the Phone Book /

Important Revie / In Case of Difficulty ...................................................................................................21 Limited Ninety-Day Warranty ..................................................................................................................22

1 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. 5. Plug the adaptor to the socket-outlet that near the equipment and shall be easily accessible. SAVE THESE INSTRUCTIONS SAFETY INSTRUCTION FOR BATTERIES CAUTION:

TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only 4 x AA alkaline battery. Pendant uses a 12V alkaline battery. 2. Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Exercise care in handling battery in order not to short the battery with conduction materials such as rings, bracelets and keys. The battery or conductors may overheat and cause burns. 5. Do not attempt to recharge the battery identified for use with this product. The battery may leak corrosive electrolyte or explode. 6. Do not attempt to rejuvenate the battery identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin. 7. When inserting battery into this product, the proper polarity or direction must be observed. Reverse insertion of the battery can cause charging, and that may result in leakage or explosion. 8. Remove the battery from this product if the product will not be used for a long period of time (several months or more) since during this time the battery could leak in the product. 9. Discard dead battery as soon as possible since dead battery are more likely to leak in a product. 10.Do not store this product, or the battery identified for use with this product, in high-temperature areas. A battery that is stored in a freezer or refrigerator for the purpose of extending shelf like should be protected from condensation during storage and defrosting. The battery should be stabilized at room temperature prior to use after cold storage. SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 4. Use caution when installing or modifying telephone lines. NOTE: Refer to FCC Wants You To Know section before connection to telephone. 2 IMPORTANT NOTES The telephone portion of your dialer/message console has been tested and found to comply with all applicable UL and FCC standards. This product is not a security system or an emergency service device. The manufacturer makes no claim as to the suitability of this product to perform as a life-saving device. See section marked LIMITED NINETY DAY WARRANTY for full warranty conditions. The unit will not work through a switchboard, some phone systems that dont always supply a standard dial tone or phone systems that require a delay, (for example, some systems where you must dial a number to get an outside line). For more information, call 1-888-558-7420. FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided

(i.e., RJ11C) in the packaging with each piece of approved terminal equipment The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isnt practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone equipment, disconnect from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Some telephone equipment operate at frequencies that may cause interference to nearby TVs and VCRs; to minimize or prevent such interference, the base of telephone equipment should not be placed near or on top of a TV or VCR; and, if interference is experienced, moving the telephone equipment farther away from the TV or VCR will often reduce or eliminate the interference. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. 3 a) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. b) NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this telephone does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Telemergency Ltd. 200-16B2 13th Avenue Ronkonkoma, N.Y. 11779 SERVICE According to FCC regulations, this equipment, which has been certified and registered by the FCC, may only be repaired by authorized persons. If repairs or adjustments are made by an unauthorized person, the FCC certification may be voided. Should you encounter any problems, please call the toll free Consumer Helpline for assistance:

1-888-558-7420, 9:00 am - 4:30 pm (E.S.T.) Any Questions?

STOP...don't take unit back to the store. Call our toll-free number... 1-888-558-7420 Listen as our experts talk you through the problem GENERAL INFORMATION UNPACKING This package contains:

ClearVoice unit Accessory: CV200B-Wireless dual remote pendant with ClearVoice 200B only One AC Adaptor One modular Line Cord User Manual/Warranty Information If anything is missing or damaged, contact us at 1-888-558-7420. keep the package to transport unit. For your reference keep a record of date of purchase and code number on the pendant. Please keep the sales receipt for warranty reference. Date of Purchase_______________________________ ABOUT YOUR UNIT The following important features are included..amplified handset, dial a number from memory, dial a number from its phone book, can let you listen to who is calling you if you have Caller ID service, use as a standard speakerphone, use to Call-4-Help in an emergency, can be used as a speakerphone remotely

(optional on ClearVoice 50B) even if you can't get to the phone plus much more. ClearVoice Models 50B, 100B and 200B can even offer usage of these features for a limited time when new AA alkaline batteries are installed. The batteries can supply power for up to 6 hours of power failure(s). Safety Features:

adviseusers to hang up the handset. The handset must be hung up to assure normal operation of the telephone. speakerphone will reset, allowing full use of your telephone. will be terminated so that the Emergency System can proceed. The ClearVoice 50B, 100B and 200B have features which can be life-saving

.If the handset is not hung up, a loud alarm will activate after 30 minutes to

.In an Emergency, if the telephone is off hook, when the Telemergency Emergency Help System is activated, the call

.If in using the Speakerphone, user forgot to switch it off, after 30 minutes, the 4 LOCATION OF CONTROLS ClearVoice 200B Pendant 15. button 1. EXT button*

2 . CALL BACK / OK button 16. MENU button 3. DELETE button 4. Handset Holder 5. 6. Speaker 7 . Handset volume control 8. Dial keypad 9. Loud LED 10. Display 11. New Call LED 12. 13. 14. Ringer Hi/Mid/Lo switch 19. FLASH button 21. HOLD button 23. Ringer LED button button button 22. REDIAL button 20. 17. Tone Hi/Lo switch 18. CLIP (Exit) button switch 24. SPEAKER button with LED 25. Pendant button 26. Pendant LED

*For use with the System 2 Pro total telephone system..This telephone allows for expansion which can allow you hands-free communication throughout your home as well as for Emergency Help System. For more information, call Telemergency customer service Tel. # 1-888-558-7420. 5 INSTALLATION Where to install this feature-oriented telephone When installing this feature-oriented telephone, consider that the unit should be placed in an area of common use during the day and night time. ClearVoice 50B, 100B and 200B users should locate the phone within 10-15 feet line of sight from where user spends a lot of time. The remote pick-up can be from a distance far greater than the 10-15 feet. This allows users the remote speakerphone features of the unit plus remote activation of the Emergency Help System ClearVoice 200B, for those who may not easily get to the telephone or are concerned with falling. Installing batteries Your telephone requires four AA alkaline batteries (not supplied) if you wish to utilize all features during power failures. During power failures, full functionality of the telephone is maintained for a total of a maximum of 6 hours total power failure time. If you do not have batteries installed, the basic phone function of calling out and receiving a call can still be used. Note: The telephone numbers in memory and the voice recordings are stored in non-volatile flash memory which do not require battery backup. Before opening the battery compartment, make sure the telephone is disconnected from the telephone line and the 120V AC Adaptor is disconnected from the unit. 1. Use a flat-blade screwdriver to lift the battery compartment door located on bottom of unit. 2. Insert four AA alkaline batteries into the compartment as indicated by the polarity symbols. 3. Snap the battery compartment door back into place. Note: During power failures where the unit operates on battery, if there is no display or the display dims, replace the batteries with 4 new alkaline AA batteries to assure maximum power failure time. To replace the battery of the remote pendant The pendant is equipped with a pre-installed internal battery. 1. Use a screwdriver to remove the screw on the lower case of the pendant and remove the lower case. 2. Replace the 12V DC Alkaline battery with a fresh one. 3. Replace the lower case and secure it with the screw. 4. It is important that full functionality be checked out after replacing battery. 6 Choose your location Your ClearVoice 50B, 100B or 200B must be placed on a hard surface and connected to both the telephone wall jack and an 115V AC power source. Do not plug into a 115V AC power source that is controlled by a switch. Allow at least one inch to the rear and four inches above the unit for ventilation. We suggest you locate it in a location within 10 feet of where user spends much of their time. You can activate the speakerphone on an incoming call. You can typically speak form up to 10-15 feet from the phone which should be in direct line of sight. Speaking louder may allow you to speak up to 20 feet, line of sight. The ClearVoice 200B is supplied with a dual pendant which can activate the speakerphone, but also can activate the emergency mode from a distance of up to 80 feet. This range may vary based upon structural or environmental conditions. To retain full operation of ClearVoice 50B, 100B or 200B during power failures insert 4 AA batteries

(not included) into the battery compartment located at bottom of unit. You may do this by simply disconnecting the AC adaptor from the power source, then removing the battery cover, connecting the batteries and replacing the cover. Then immediately connect AC Adaptor to AC outlet to assure battery life is not being affected. Note: The AA batteries should be alkaline. Connecting the ClearVoice 50B,100B or 200B:

1 A. Plug one end of the supplied telephone cord into the jack labeled TEL LINE located at the back of the unit. B. Plug the other end of the supplied modular cord into the telephone wall jack. 2 A. Plug the supplied power cord of the AC Adaptor into the jack labeled DC9V 200ma located on the back of the unit. B. Plug the other end of the power cord into an electrical outlet not controlled by a wall switch. Wall Mounting On a Wall Phone Plate 1. Press and lift out the handset holder. Rotate it 180, and snap it into place so it will hold the handset in place when the phone is mounted on the wall. 2. Insert the mounting brackets two tabs into the matching slots opposite the keyhole slot on the underside phones base. Then press down and slide the bracket upward until the tabs snap into place. 3. Plug one end of the supplied short modular cord into the LINE jack at the back of the base. 4. Plug the cords other end into the wall plate jack, then align the bases keyhole slots with the wall plate studs and slide the phone downward to secure it. On a Wall Without a Plate To mount the phone directly on a wall, in addition to the preceding steps, you need two screws (not supplied) with heads that fit into the keyhole slot on the bottom of the base. 1. Drill two holes 83mm apart (vertically). Then thread a screw into each hole, letting the heads extend about 5mm from the wall. 2. Substitute the long modular cord for the short cord. 7 Big Buttons Talking Caller ID*

Voice Guided Programming Menu Enhanced Voice Clarity for the hearing impaired Stores up to 30 telephone #s in memory with name-for general and emergency #s with (EHS) Up to 64 Caller ID #s SPECIAL HIGHLIGHT FEATURES The Phone that will automatically hang up if accidently left in Speakerphone mode for a period of time. The Phone that will automatically advise you with a loud beeping alarm if accidently left OFF Hook The Phone that will activate the Emergency Help System if pendant is activated The Phone that can tell you who is calling The Phone that can answer a call remotely The Phone that can get you emergency help with a press of a button on accessory CV114 pendant Easy To See Large LCD display with large characters Easy to Hear Amplified Volume and Tone Volume Adjust For Handset Loud Ringer Hearing Aid Compatible Easy To Use Talking Keypad and Phone Book Dial Phone #s From Phone Book Phone Book Emergency Help System (EHS) Other Features Off-Hook Detect Definitions:

Talking Caller ID allows user to hear # calling or name- Caller ID service required Remote Pickup (Clearvoice 100B, 200B) user can answer an incoming call remotely Remote Speakerphone (ClearVoice 100B, 200B) allows user to speak hands-free remotely up to 20 feet Emergency Help System (EHS) - with a press of a button on unit can call emergency #s you entered Remote activation of Emergency Help System (EHS)*** CV114 pendant can activate the EHS from a distance of up to 100 feet depending upon structural and environmental conditions LCD display shows last 64 nos. called, time and date and prompts to simplify usage Voice Clarity (Amplified/tone control) handset volume/tone adjust to improve clarity of call for the hearing impaired or noisy environments.

*Caller ID service required

**No Monthly Fees Emergency Help System This is a feature that allows you to Call-4-Help to those people you would like called in an emergency. For the Emergency Help System to be activated and also dial out the emergency telephone numbers entered in the sequence you would like the telephone nos. called, requires that the telephone line ClearVoice 200B is connected to is ON HOOK(hung up) and all instructions in setting up have been done. The unit has a pre-recorded generic emergency message. No Monthly Fees!**

(+) button on unit or optional pendant to activate EHS Loud Local Alarm Dials Emergency #s programmed #s in sequence Sends out Emergency Message To Called #s Speakerphone feature allows called party(s) to speak to in-range caller Real Time Clock Battery Backup Wall/Desk Usage 8 red button on telephone for 1 second and release, LOUD LED display will now be lit. USING FEATURES OF YOUR TELEPHONE THAT DO NOT NEED PROGRAMMING Notes: To program names and #s for the featured Phone Book and Emergency Help System as well as addl programmed features proceed to section: SETTING UP TO USE THE PROGRAMMABLE FEATURES OF YOUR UNIT Before proceeding, move speaker phone control on side of unit to mid-position. Ringer Volume Control The ringer sound level can be adjusted by sliding the RINGER switch located on the side of the unit to select high (HI), mid (MID) and low (LO) level. The red bright LED on front of unit will flash with all incoming calls. The red bright LED, located on rear of unit will light if you have Caller ID and have not answered 1 or more calls Handset Volume Control/Tone Receiving Adjustment The HANDSET volume control located under the handset enables user to adjust the amplification of the call which can result in a more comfortable listening level. To turn on this amplifier after you pick up the handsetpress Move handset volume control located under handset to desired amplification. Move TONE level, located on side of unit to desired level. Your unit is now set to your desired level as long as the settings are kept. Each time you hang the button for 1 second handset up, the amplifier will go OFF. Each time you pick up the handset, simply press the red to turn on the amplifier. To turn off amplifier and tone level simply press the red button for 1 second. LOUD LED will go OFF Dialing a Call 1. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone. 2. Press the keypad for the telephone numbers you wish to dial. The display will show the number that you dialed on the keypad. If you dial a number over 14 digits long, it will show the last 14 digits only. 3. When you have completed your call, hang up the handset, or press SPEAKER button again. To switch from a handset conversation to a speakerphone conversation .... press the SPEAKER button and hang up the handset. To switch from speakerphone to handset, simply pick up handset. Pre-Dialing a Call (Hearing each digit entered before dialing) 1. Dial on the keypad the telephone number. The telephone will voice the digits dialed (with voice option ON). To correct a number press the DELETE button for each incorrect digit. 2. Press SPEAKER button and telephone # will be dialed. Receiving a Call When you receive a call, the telephone rings, the Ringer LED flashes and the display shows the CALL#

and the caller telephone number, and will state the name of the caller if the TELEPHONE # matches with a name recorded in the phone book*, if not, it will say the numbers of the calling party if available (Caller ID service required). Caller ID service required to detect Call# and/or name of caller. This feature allows you to decide to pick up the phone or not depending on who is calling. If you want to talk to the caller:

1. Pick up the handset or press SPEAKER button to answer the call. 2. At the end of the call, return the handset to the cradle or press SPEAKER button again to disconnect.. Receiving a Call/Remote Speakerphone (ClearVoice 100B and 200B) Simply press the red button on the pendant for 1 second to connect to an incoming call and activate its speakerphone, if you hear the phone and you are within range, but cant get to the telephone. To terminate the call, press the red button until you hear a Beeptone from your ClearVoice unit. Note: An important feature is included that if the speakerphone was activated with the wireless pendant and you forgot to hang up, After 30 minutes, the phone will beep for 7 seconds. If within these 7 seconds the called party (if still connected) presses any numeric key on the phone, the unit will be kept in speakerphone mode conversation can continue for 30 additional minutes. If no numeric key on the phone is pressed during the 7 seconds, the telephone will deactivate the speakerphone and hang up, unless you pick up your handset on the ClearVoice unit to continue. Note:This convenience feature is particularly useful if you are sitting on a couch, busy doing something else, cant get to the phone on time and dont want to miss the call. 9 switch. s unit is compatible with inductively coupled hearing aids. Speaker Volume Control You can adjust the speaker volume for a more comfortable listening level by sliding the This will also adjust the volume of the voice driven features as well as speakerphone levels when speaker button activated. It is suggested to maintain the volume at medium level. Redial Note: To redial the last number called. 1. Lift the handset or press SPEAKER button. 2. Press the REDIAL button. Noted: The last number dialed (up to 32 digits long) can be redialed. Pause You can insert a 3.6 seconds which will create a pause into dialing or storing a number into memory in order to access custom services and possible short delays in getting dial tone. Press REDIAL button at the desired point in number. Press REDIAL button again if an additional 3.6 seconds is needed. Hold To place a call on hold, press HOLD button. The hold indicator will light. To return to the call, press the SPEAKER button (or lift the handset), the HOLD LED goes off. Flash Many special network services, such as Call Waiting, require a switch hook signal. The FLASH button provides the electronic equivalent of a switch hook operation. For example, if you subscribe to Call Waiting*, you can use this feature to answer another call on the same line by simply pressing the FLASH button on the unit. Press the FLASH button to return to the first call. Please note that a subscription may be required to use these services. Hearing Aid Compatibility Thi SETTING UP TO USE THE PROGRAMMABLE FEATURES OF YOUR UNIT Notes: Your unit has many VOICE PROMPTS to assist you MENU BUTTON Is also used for EDIT CLIP BUTTON is also used for EXIT The following features are shown on the LCD display as well as Voice Prompts can be heard Setting the LCD contrast Setting the Time and Date Store # to Phone Book Name Recording for Phone Book Record Emergency Message Check Emergency Message Settings for Tone /Pulse operation- preset to tone Setting the Ringer Tone (Select the sound that fits you best) Setting the language (English or Spanish) - preset to English Setting the Voice ON/OFF (preset to Voice ON) Lets get started: Slide Speaker Volume (located on side of unit) to mid-position to hear the voice prompts Important: In setting the following criteria, if there is a delay in programming a specific feature of more than 60 seconds, your unit will reset. In that event please re-enter the section you are entering. Symbols you should know: OK BUTTON Is also used for CALL BACK 10 or or or buttons and scroll to the present minute. buttons and scroll to the present hour and confirm with OK scroll buttons (upper front right) and scroll to select the desired contrast level. Setting the LCD contrast (If LCD contrast is OK, press Exit button) Note:depending on the viewing angle of the telephone, the user may want to adjust the LCD contrast:

1. Press and release the MENU button. The display shows LCD CONTRAST. 2. Press the OK button (located upper front left. The display shows the current contrast setting with values between 1 and 5. 3. Press Press OK button again to accept. Unit will now say TIME/DATE. 4. Press CLIP (Exit) button to exit this set-up mode if you want to bypass TIME/DATE. Setting the TIME and DATE Important: If you have subscribed to Caller ID service, please note that some telecom providers, when sending the Caller ID signal also send the time and date. In this case the telephone will automatically set its internal clock. 1. Press and release the MENU button until TIME/DATE is shown. 2. Press the OK button. The display shows ENTER TIME and the hour digit is flashing. 3. Select the current hour scrolling button. The minutes will now flash in the display. 4. Select the required minutes scrolling Press the OK button. The display now shows ENTER DATE and the month digit is flashing. 5. Select the current month scrolling Confirm with OK button. The day will now flash in the display. 6. Select the current day scrolling Confirm with OK button. Unit will say STORE # TO PHONE BOOK. 7. Press CLIP (Exit) button to exit this set-up mode if you want to bypass Store #S TO Phone Book Store #s to Phone Book & Name Recording For Phone Book (Emergency Help System and General #s) Note: The 30 # phone book allows you to enter, display, record the persons name and specify if this a telephone no. that is to be stored as a # you wish to include in your phone book or a phone # or phone #s you would also want to call in an Emergency (for detailed information see section on Telemergency Emergency Help System) Suggestion: For phone #s to be called using the Emergency Help System we suggest you list them in the sequence you would like them called as shown below (Telemergency Emergency Help System before starting:

Note: All telephone #s are to be entered exactly as you would dial the telephone # from where the ClearVoice unit is to be used. Before proceeding please write the Emergency telephone #s in the spaces below. Note: The calling sequence will be as below if programmed into the ClearVoice unit. Location 1 means it is the 1st no. To be called, location 2 is the 2nd # to be called, etc. Note: Before entering 911 if desired as one of the telephone #s to be called in an emergency, check with your local 911 service to verify the use in your area. Location buttons and scroll to the present month. buttons and scroll to the present date. Name or or Telephone #s *

Telemergency Emergency Help System _____________________ ________________ _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired _____________________ ________________if desired 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Besides Telephone #, you may also require 1 and/or the Area Code. TABLE 1 11 or or until it reads Emergency ON on LCD display to desired LocationFor example: If it is the 1st # to be called, press a scroll Storing up to 30 telephone numbers in the phone book including emergency nos. to be called in a n emergency. E ntering Emergency telephone numbers and names: (for Emergency Help System) Note: If you have a telephone system where it is may be required to put a pause (P) before dialing a particular digit press the REDIAL button and a 3.6 second pause will be created. This is also important if you are using on a PABX or PBX where you insert a pause before and after entering 1,8 or 9,or other systems where outside line dial tone can be delayed. 1. Press (EXIT) button until PHONE BOOK icon is displayed on LCD display and states Phone Book. 2. Press and release the MENU button until STORE NUMBER is shown and states Store #s to Phone Book. 3. Press the OK button. The cursor will flash on the left side of the LCD display in the first position. 4. Enter the required telephone number (Table 1) with a maximum of 22 digits using the number pad and Press OK button to confirm, (both the erase feature and pause feature can be used when storing the Telephone number), telephone numbers are to be entered exactly as you would dial the telephone no. manually from where the ClearVoice model is to be used. 5. Enter the required name with a maximum of 16 letters. Cursor shown as (I) is all the way on left side of LCD display..See Table A below for details (How to enter names in the phone book). 6. Press OK button to confirm.The display now shows EMERGENCY OFF. Since it is an Emergency Telephone #, Press a scroll button 7. Press OK button. 8. Press a scroll button button until it reads 1 on the display, 2 for 2nd etc. 9. Press OK button..unit will say Number Saved Unit will now say Name Recording For Phone Book 10. Press and hold down OK button.. you will hear a Beep..speak into unit with Name related to a telephone #. Note:To record voice (example this is John), hold down OK button, immediately speak clearly into microphone after a beep and VOICE icon is flashing on LCD display.. Release the button when you finished or the unit will stop recording after 3 seconds. The voice prompt will then be played automatically. [Recording the Voice is necessary for the personalized talking Caller ID and talking phone book feature]. You can repeat steps 1 to 9 to enter more numbers or press CLIP (Exit) button to exit How to enter names in the phone book The number buttons are also inscribed with letters for entering the name. By repeatedly pressing the appropriate button, upper case letters as well as numbers and special characters can be entered. Overview: Note: In entering a name Note: The numeric keys 1 thru # can be used as shown in Table I 1 2 3 4 5 6 7 8 9 W X Y Z 9 0

, . : ; ? 0

TABLE A Example: To enter the name JIM. Press 5 button until J is displayed ........... Wait 2 seconds Press 4 button until I is shown ................. Wait 2 seconds Press 6 button until M is shown ................Wait 2 seconds space + & - / 1 A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 P Q R S 7 T U V 8 12 Name:

Telephone# * Name:

General Telephone nos. to be entered Telephone# *

____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ ____________________ ________________ ____________________ _______________ Besides Telephone #, you may also require 1 and/or the Area Code TABLE 2 Entering General Telephone #s and Names Notes: You can enter a total of 30 telephone #s. Ex. If you entered 10 telephone #s for the Emergency System, you can enter 20 General Tel #s. Help If you have a telephone system where it is may be required to put a pause (P) before dialing a particular digit press the REDIAL button and a 3.6 second pause will be created. This is also important if you are using on a PABX or PBX where you insert a pause before and after entering 1,8 or 9,or other systems where outside line dial tone can be delayed. You must enter the tel. no. and name on t he LCD display 6. Press OK button. The display now shows EMERGENCY OFF. 8. Press and hold down OK button.. you will hear a Beep..speak into unit with the Name 5. Enter the required name with a maximum of 16 letters. Cursor shown as (I) is all the way on left 2. Press and release the MENU button until STORE NUMBER is shown and states Store #s to Note:To record voice (example this is John), hold down OK button, after a beep and VOICE icon 1. Press (EXIT) button until PHONE BOOK icon is displayed on LCD display and states Phone Book. Phone Book. 3. Press the OK button. The cursor will flash on the left side of the LCD display in the first position. 4. Enter the required telephone number with a maximum of 22 digits from Table 2 above using the number pad and press OK button to confirm, (both the erase feature and pause feature can be used when storing the telephone number), telephone numbers are to be entered exactly as you would dial the telephone no. manually from where the ClearVoice model is to be used. side of LCD display. See Table A above for details (How to enter names in the phone book). 7. Press OK button. unit will say Number Saved Unit will now say Name Recording For Phone Book related to the telephone #. is flashing on LCD display, immediately speak clearly facing the unit. Release the button when you finish or the unit will automatically stop recording after 3 seconds. The recorded personalized talking Caller ID and talking phone book feature]. You can repeat steps 1 to 9 to enter more numbers or press CLIP (Exit) button to exit. Name Recording for Phone Book Notes: If you have Caller ID in, it can be important to record a name with the entered phone # in the phone book. In this way when a caller rings your phone, the talking Caller ID will say the name of the caller. Otherwise the phone # will be stated. It is also useful if you are scrolling for a particular persons telephone # you enter into the Phone Book. voice will then be played back automatically. [Recording the Voice is desirable for the 13 If you have already recorded a name associated with a phone #, press MENU button to go to next step or press Exit button. To change or record a voice name to a telephone # in the Phone Book.. 1. Press and release the Menu button until the Name Recording is shown on LCD display 2. Press and hold down OK button.. you will hear a Beep..speak into unit with the Name related to the telephone #. ecord Emergency Message (for Emergency Help System) R It is important you record the personalized message with all the important information as in B. below. A. Your unit includes a back-up pre-recorded message This is an emergency call, to accept this call press zero. B. Your own message that must be recorded to properly use the Emergency Help System (max. recording time is 20 seconds). The message must always end with please immediately hang up if you cannot get me help now.. To accept this call press zero. Example: There is a medical emergency at the home of John Smith at 123 Main Street, Apt. 4D, please come @ once. Please immediately hang up if you can't get me help now. To accept this call press zero. To Record your own emergency message (for Emergency Help System) 1. Press and release the MENU button until the RECORD MESSAGE is shown. 2. Press and hold the OK button. Start your message directly after the signal tone and VOICE icon is flashing. While recording, keep at a distance of 10-12 inches from the telephone so that you can speak easily into the microphone on the upper side. 3. Release the OK button after you have finished your emergency message. The message will now be played back automatically. Check Emergency Message (for Emergency Help System) You can check the emergency message at any time. 1. Press and release the MENU button until the CHECK MESSAGE is shown. 2. Then press the OK button to play back the message. Setting the Tone/Pulse (you may skip this step by pressing MENU button) Important: Your unit is already preset to TONE dialing . If you have a tone dialing phone and tone dialingservice, skip this step by pressing the Exit button.) If you have a rotary (pulse) dialing system in your home,follow these instructions. 1. Press and release the MENU button until TONE/PULSE is shown. 2. Press the OK button, the display shows TONE. 3. Select the TONE or PULSE by scrolling or Confirm with OK button. Unit will say TONE/PULSE. 4. Press CLIP (Exit) button to exit this set-up mode. Setting the Ringer Tone Note: Your unit is preset to a Ringer tone. (If you do not wish to change press the Exit Button) To change..follow these steps. 1. Press and release the MENU button until RINGER TONE is shown. 2. Press the OK button, the display shows 1. 3. You can select ringer 1, 2, or 3 by scrolling or Confirm with OK button. Unit will say LANGUAGE. 4. Press CLIP (Exit) button to exit this set-up mode. Setting the language (you may skip this step by pressing MENU button) Note: This unit has a voice menu as well as a pre-recorded emergency message that can display and/or speak its messages in English or Spanish. Your unit is set to English. Skip this section if you wish to continue usage in English by pressing EXIT button. buttons. buttons. 14 slide switch located on the side of buttons. Confirm with OK button. Unit will say Language.. or or buttons to select between VOICE ON or OFF and confirm with OK button. Unit will This telephone is able to write on the LCD and to give you a voice guide in two different languages. By selecting the language the user will automatically select both the voice and the written LCD language. 1. Press and release the MENU button until LANGUAGE is shown. 2. Press the OK button, the display shows ENGLISH (for example). 3. Select the desired language scroll the 4. Press CLIP (Exit) button to exit this set-up mode. Setting the Voice ON/OFF (skip this step if you wish to keep the Voice prompts ON) The telephone is factory preset with all voice features ON. (To exit, press Exit button) Note: The volume of the voice features is regulated thought the unit. Important: If using the voice prompts or speakerphone, it is important to slide switch to the middle. If the user does not wish to hear the voice prompts, this voice feature can be set to OFF. We suggest that while programming you keep this feature ON. 1. Press and release the MENU button until VOICE is shown. 2 Press the OK button. 3. Scroll the say VOICE ON/OFF. 4. Press CLIP (Exit) button to exit this set-up mode. Recording / Editing / Deleting voice prompt of name of phone book With caller ID service activated, when an incoming call is received, the unit will display and announce the callers phone number. If the callers phone number is stored in the phone book, and callers name will be displayed too. If the voice prompt is recorded for this phone number, the unit will announce the voice prompt recorded instead of the callers phone number. 1. Press and release the MENU button until the NAME RECORDING is shown. 2. Press the OK button. A list of the phone book entries will be display. 3. Sroll 4. To record or edit the voice prompt, hold down OK button. Speak clearly into the microphone after a beep and VOICE icon is flashing. Release the button when you finished or the unit will stop recording after 3 seconds. The new voice prompt will then be played automatically. To delete the voice prompt recorded, press DELETE button during the voice prompt is playing. 5. Repeat step 3 to 4 to edit or delete more entry or exit the set-up mode by pressing the CLIP Exit button. To Edit the Phone Book Memory (All telephone #s including Emergency #s and their location) 1. Press and release CLIP (Exit) button, 2. Select the required location from the phone book by scrolling 3. Press and hold MENU button for two seconds. The display will show EDIT?. 4. Press OK button, the first digit of the selected phone number will be flash. 5. You can move the cursor to the required position by scrolling buttons. To delete the digit, press DELETE button, or press any numeric key to replace the digit and confirm with OK button. Then the display shows the flashing first letter of the name. 6. Move the cursor to the required position by scrolling DELETE button, or press any numeric key to replace the name, and confirm with OK button, EMERGENCY ON or OFF is shown. 7. If the display shows EMERGENCY OFF, and you want to change it as an emergencys call dial out, select EMERGENCY ON by scrolling is shown. Select the required location by scrolling location is in use, now display shows OVERWRITE?, confirm with OK, SAVED! is shown. If you select EMERGENCY OFF and confirm with OK, SAVED! is shown. 8. You can repeat step 2 to 7 to edit more numbers or press CLIP (Exit) button to exit. buttons to select the list you like to record a voice or name for it. phone book icon is shown. or buttons and confirm with OK button, if the buttons. To delete the letter, press buttons. 15 or or or or or buttons, and confirm with OK button, now LOCATION

. or or buttons. icon is shown. phone book icon should be shown. buttons, or enter the initial letter of the name of icon on the LCD display.. that is one of the numbers that can To Delete the Phone Book Memory (All telephone #s including Emergency #s and their location) 1. Press and release CLIP (Exit) button, 2. Select the required location from the phone book by scrolling 3. To delete single memory, press DELETE button once. The display will show the DELETE?. Press DELETE button for 2 seconds. The telephone number and name will be deleted and the display will now show another number from the phone book. Important:To delete all entire memory, press and hold DELETE button until the display shows DELETE ALL? If you delete the entire memory, you must re-enter the telephone #s to call Press DELETE button for 2 seconds until EMPTY appears on the display. IMPORTANT: If you delete the entire memory, you must re-enter the telephone #s to call for the Emergency Help System To review the Phone Book Memory (All telephone #s including Emergency #s and their location) 1. Press and releaseCLIP (Exit) button, 2. Review the stored phone number by scrolling the person you wish to call using the number pad. After a short time, the display will show the first stored telephone number with this initial letter, say the name and VOICE icon is shown if it was recorded, or voice the telephone number. You can now search for further numbers under this letter by scrolling Notes:

If no telephone number is stored, the display will show EMPTY. After you view all the call in memory, the display will show END OF LIST. If a reviewed number is shown with be dialed if the emergency help system (+) has been activated. EMERGENCY HELP SYSTEM EMERGENCY HELP SYSTEM This is a feature that allows you to Call-4-Help to those people you would like called in an emergency. For the Emergency Help System to be activated and also dial out the emergency telephone numbers entered in the sequence you would like the telephone nos. called, requires that the telephone line ClearVoice unit is connected to is ON HOOK(hung up) and all instructions in setting up have been done and verified. The unit has a pre-recorded generic emergency message. Emergency Message It is important you record the personalized message with all the important information as in B. below. A. Your unit includes a back-up pre-recorded message This is an emergency call, to accept this call press zero. B. Your own message that must be recorded to properly use the Emergency Help System (max. recording time is 20 seconds). The message must always end with please immediately hang up if you cannot get me help now.. To accept this call press zero. Example: There is a medical emergency at the home of John Smith at 123 Main Street, Apt. 4D, please come @ once. Please immediately hang up if you can't get me help now. To accept this call press zero. To Delete your own emergency message and revert to the pre-recorded message If you have recorded your own message, you can delete this and by doing so revert to the pre-recording message. Note: As stated above, it is important to record a personalized message. 1. Press and release the MENU button until the CHECK MESSAGE is shown. 2. Then press the OK button to play back the message. 3. During the playback, press DELETE button. Your own message will be deleted and you will be using the pre-

recorded greeting. 16 icon and location # is shown. phone book icon is shown. buttons until display with its Important: Emergency Help System feature Note: The phone book allows you to enter, display, record the persons name and specify if this a telephone no. that is to be called in the units Telemergency Emergency Help system. It is important to note that any telephone # entered that is less than 6 digits (including pauses area codes or any other digits will only be called 1 time if the emergency help system is activated. (Ex. 911). The Emergency Help System when activated will call all entered #s in the Emergency Help System 2 times, unless a called party stops the process or the telephone # is less than 6 digits(including all pauses area codes etc. To dial and check an entered and displayed emergency telephone number from the Phone Book Memory:

1. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone. 2. Press and release CLIP (Exit) button, or 3. Scroll to desired tel. no. with 4. Press OK button, Unit will dial telephone no. 5. If you desire you can speak to called party and explain that you are adding their telephone number to your Telemergency Emergency Help System. IMPORTANT: Follow all Cautions below if Emergency Help System is to be activated. If you are using the Emergency Help System and wish to call 911 or other emergency services which have a dispatcher, the following procedures should be followed. Note: Check with your local 911 and/or other emergency services and verify the use of their no. in your area. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:

1. Remain on the line and briefly explain to the dispatcher the reason for the call. 2. Perform such activities in the off-peak hours, such as early morning or late evenings. Caution - To ensure proper operation, this equipment must be installed according to the enclosed installation instructions. To verify that the equipment is operating properly and can successfully report an alarm, this equipment must be tested immediately after installation, and periodically thereafter, according to the enclosed test instructions. Caution - This equipment cannot report an alarm when other equipment (telephone, answering system, computer modem, etc.) connected to the same phone line is in use. Important Information about ClearVoice 200B Emergency Help System:

Note: A tone dialing telephone is required for a called party(s) to be able to respond to a message received from the Emergency Help System

. 1. If NO emergency numbers have been entered, the telephone will not dial any no. and just beep loudly for 15 seconds continuously when the emergency (

) button on the telephone, is pressed and held for more than 4 seconds or on the red button on CV112 dual pendant (standard on the ClearVoice 200B) is pressed for 4 seconds. If red pendant button is pressed and held for 8 seconds or more continuously, the emergency process will stop and reset. 2. It is important that the CV 114 pendant must be within the range of the telephone to activate the emergency feature. 3. When the red key on the optional pendant (standard on the ClearVoice 200B) is pressed and held for 3-5 seconds and pendant is within the range of the unit , the LED on the pendant will begin flashing to let user know that unit is activated and if the pendant is pressed for 8 seconds the LED will simply stay ON for approximately five (5) seconds letting user know that the Emergency Help System is OFF and reset. To activate the Emergency Help system is simple. Simply press and hold down red button until LED flashes on the pendant. Then release button. This LED will stay lit for 15 seconds. 4. To stop the already activated emergency help system, turn off speakerphone by pressing the 17 speakerphone button or if using the dual pendant . Press the red button on pendant for more than 8 seconds. LED will stop flashing and remain on for approximately 5 seconds. 5. If a called party presses 0 on their tone dialing telephone after hearing the emergency message, the emergency speakerphone feature will be activated allowing the called party to speak to the caller, and the caller can respond (if near or able) for up to 1 minute if near speakerphone of the ClearVoice 200B. After 1 minute, beeps will be heard for 7 seconds and to continue either party can press any key on their numeric keypad for the call to continue for another minute. 6. The emergency help system will automatically stop dialing the entered emergency numbers if all the emergency nos. have been dialed 2 times or if any person who has received the emergency call presses 1 then 2 on their tone dialing phones numeric keypad after the 0 key has been pressed. Note: Any entered telephone # that is 6 digits or less will only be dialed 1 time. (ex. 911) 7. Do not pick up handset of ClearVoice 200B if the Emergency Help System has been activated, the speakerphone is active. Lifting the handset will deactivate the Emergency Help System. Checking the Range of the Dual Wireless Help Pendant Note: The typical range can operate up to 100 feet line of sight. This range may be reduced by structural or environmental conditions. Follow all installation instructions. Before checking the range remove the telephone line cord where it is marked TEL.LINE located at the back of the unit. Press and hold the red button on the pendant until the LED on pendant begins flashing (from the farthest place you will be using the pendant within the above criteria). If within range, The Emergency Help System will be activated and you will hear the local alarm from unit. To stop the unit from dialing emergency numbers. Press and hold the red button for 8 seconds until the LED stops flashing and remains steady ON for approximately 5 seconds. The pendant should be used at a reduced range. Note: If you are out of range of the unit, move closer and follow the directions. IMPORTANT: Install the telephone line cord to where it is marked TEL.LINE located at the back of the unit. To verify you reconnected the telephone line cord.. press speakerphone button until you hear dial tone, then press speakerphone button again to turn off. TO ACTIVATE THE EMERGENCY HELP SYSTEM IF AN EMERGENCY OCCURS:

IMPORTANT: For the Emergency Help System to activate and also dial out the emergency telephone numbers entered in the desired sequence, as entered, requires that the telephone line the ClearVoice, unit is connected to is ON HOOK(hung up), and all instructions in setting up this important feature have been confirmed. 1. Press and hold the will blink for 15 seconds. The telephone local alarm sounds for 15 seconds. The telephone will verify the telephone line and dial out the entered emergency help system numbers automatically in speakerphone mode when phone line is available for dialing. Note: Using the dual wireless pendant (CV200B). To activate the Emergency Help System with the dual pendant , press and hold down the red button on the pendant for 4 seconds until the pendant LED will begin flashing. The pendant will flash for approximately 15 seconds. This will activate the Emergency Help System if user is within the operating range of the unit. Note: If user holds the red pendant button for 8 seconds or more and is in the operating range of the unit, the Emergency Help System will turn off and reset. The LED on pendant should stop flashing and its LED to remain lit for approximately 5 seconds. Note: To turn off the Emergency Help System if activated, you can press the Speakerphone button. and note that the speakerphone LED will turn off or pick up handset of unit to turn off Emergency Help System and speak to called party if on telephone line. Then hang up telephone (ON HOOK) to reset. button on the telephone for 4 seconds, the NEW CALL LED on the telephone 18 button.

(User programmable) 2. The telephone dials out the first of the entered emergency numbers (stored in the phone book emergency location1) in speakerphone mode, and then begins playing the emergency message. If during the period the emergency message is played (if available to the called party), called party can acknowledge the call by pressing 0, the telephone will be put in speakerphone operation for 1 minute. After 1 minute, the phone beeps loudly for 7 seconds. If within these 7 seconds, the called party presses a numeric key on the phone, the unit will be kept in speakerphone mode for 1 additional minute continuously without stopping. If any numeric key on the phone is not pressed pressed during the 7 seconds, the call to the called party is disconnected. Note:If 0 is not pressed during the period the message is played, the next emergency number in the sequence will be dialed automatically in speakerphone mode. To Store a Number in hotkey The phone is equipped with an emergency hot key. This # can be programmed with the telephone number of the police or any other emergency number for this button. This button is not part of the phone book. It is a quick dial telephone number that when depressed simply dials the telephone number 1. Press and release the MENU button until the STORE NUMBER is shown. 2. Press the OK button. The cursor will flash in the first position. 3. Enter the required telephone number with a maximum of 22 digits using the number pad and confirm with OK button. 4. Press 5. Press OK button to confirm. The number has now been saved and display show SAVED!. 6. Repeat step 2 to 5 to store other numbers for other memory buttons or press DELETE button to exit. To dial the the entered #, simply pick up the handset or press SPEAKER button and press Note: The number stored in this location is for manual dialing only and will not be dialed With the emergency help feature unless the # is also entered in the phone book and when entered is programmed in as an emergency no. and a specific location. THE CALLER ID At each incoming call with available Caller ID, the telephone will ring and announce the caller with their name (if entered in phone book with name recording and matching last 7 digits of incoming phone no. shown on LCD display), if available, or with a voiced telephone number if available. Important: When using the Caller ID features, please note it is only available at Caller ID mode

(CLIP icon turns on). If the CLIP icon on LCD display is off, press (Exit) button once. Please note that all Caller ID features are strictly related to the service provided by the provider of your telephone services. It is necessary to subscribe to the Caller ID service supplying service to your home to have the features of who is calling (Phone book of ClearVoice unit) or telephone #s on incoming calls. Even if you dont have Caller ID service you can enjoy the many features, since if you have an answering machine, you can hear who is calling and decide to pick up call if you desire. If the telephone is connected to a PABX the caller ID features depend on the PABX. The Caller ID feature is only possible with the unit powered by the 120V AC power supplied to your unit through the AC Adaptor enclosed with your unit or by the backup batteries in case of power failure(s) for a total time of up to 6 hours of battery failure time. button. 19 Receiving a Call (the telephone can store up to 64 calls) If only the callers phone number is received, the display shows the callers phone number with the time and date it was received. The NEW icon turns on and NEW CALL LED turns on. Notes:

1. CALL#01 means this data is stored in Caller ID memory location #01. 2. The calling time and date are immediately recorded from the real-time clock. If both the callers name and phone number are received, the display shows the callers name and phone number, with the time and date it was received. The NEW icon turns on and NEW CALL LED blinks. Note: If the callers name has more than 16 characters, only the first 16 characters will be displayed. If the name and number are not available due to the callers restriction, the display shows -PRIVATE CALL- with the time and date received. The NEW icon turns on and NEW CALL LED blinks. If the name and number are not available, the display will show -OUT OF AREA- with the calls time and date. The NEW icon turns on and NEW CALL LED blinks. If a long distance call message is received, the display will show -LONG DISTANCE- with the calls time and date. The NEW icon turns on and NEW CALL LED blinks. If an incorrect, invalid or incomplete Caller ID signal is received, the display shows -NO NUMBER-. NOTES:

1. If the Caller ID memory is full, the oldest data will be removed on a first-in/first-out basis. 2. If the Caller ID information received duplicates another call in memory, the time/date will be updated and the REPEAT icon will be lit. 3. If no key is pressed within 60 seconds, the display will display the total call counter, new call counter, current time and date. Viewing the Caller ID Memory Press and scroll After you view the most recent data in memory, the display will show END OF LIST. Press and scroll After you view the oldest data in memory, the display will show END OF LIST. If the #s in memory is being reviewed for the first time, the NEW icon will be lit. The NEW CALL LED will turn off if all #s have been reviewed. Erase the Caller ID Memory 1. Select the required Caller ID memory location by scrolling the 2. To delete single memory, press DELETE button once. The display will show DELETE?. Press DELETE button for 2 seconds. The data for that call will be erased, and the CALL# and Caller ID information will be updated. To delete the entire memory, it is necessary that the red light at rear of unit is OFF. (The NEW CALL LED will be off if all #s have been reviewed) then press and hold DELETE button until the display shows DELETE ALL?. Press DELETE for 2 seconds until NO CALLS appears on the display. Both the total call and new call counters will become zero, and the current time and date will be displayed. Call Back (Redial) from the Caller ID Memory With the ClearVoice 50A, 100A or 200A hung up (ON HOOK) Select the required Caller ID memory location by scrolling Press OK button two times, the speakerphone will turn on automatically and dial the selected number. OR With the handset picked up, select the required Caller ID memory location by scrolling then press OK button, press OK again. button to review more recent calls. The CALL# will increase. button to review older calls. The CALL# will decrease. buttons, buttons. buttons. 20 or or or or buttons. ACTION Modify the LCD contrast setting LCD display cannot be seen clearly The telephone does not dial button to select insert 1 or not. Press OK again, the Note: If the Caller ID number is 10 digits, press OK button once, the unit will insert 1 before the Caller ID number automatically. You can press speakerphone will turn on automatically and dial the display number. Copy from the Caller ID to the Phone Book You can copy Caller ID information to the phone book while you are reviewing the Caller ID information. 1. Select the required Caller ID memory location by scrolling 2. Press and hold MENU button for two seconds, display will show COPY TO MEMORY?. 3. Press OK button, display will show SAVED!. IMPORTANT REVIEW DO NOT:

Connect to coin operated telephone systems Connect to party line telephone systems Connect to electronic key telephone systems IN CASE OF DIFFICULTY SITUATION Automatic Voice feature does not work Check that you have the AC adaptor connected To AC power CV 200B pendant cannot activate the Emergency Help System (ClearVoice 200B) The telephone cannot perform its features Called party cannot hear well during conversation or during emergency call Reset Procedure Check that your telephone is connected to the telephone line Talking Caller ID does not work Check that you have Caller ID also if you do it is necessary that you have VOICE ON Reset the unit by removing the AC power pack from the AC power, the batteries and the telephone for 20 minutes and then reconnect. Note: This procedure will not erase any of the #s in memory or the user recorded messages You might have programmed VOICE OFF in the menu. Change to VOICE ON or you may have set the Speaker Volume (located on the side) too low. Move Speaker Volume to mid to high setting Move closer to the telephone and speak in direction of the telephone Batteries in the pendant might require replacing 21 LIMITED NINETY-DAY WARRANTY This product is warranted by Telemergency, Ltd. against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase. EXCEPT AS PROVIDED HEREIN, TELEMERGENCY, LTD. MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, TELEMERGENCY, LTD. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF TELEMERGENCY, LTD. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above limitations, or exclusions may not apply to you. In the event of a product defect during the warranty period, contact Telemergency, Ltd. For a Returned Merchandise Authorization. Telemergency, Ltd. will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products on which a refund is made, become the property of Telemergency, Ltd. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by Telemergency, Ltd; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, setup service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Telemergency Ltd., Customer Relations, Dep't. R, 200 13th Avenue, Suite 16B2, Ronkonkoma, New York 11779 22 Telemergency Ltd. 2LMB37AZ