EdgeTM Multipoint and Quickbridge Safety and Regulatory Guide Products Covered EdgeTM
- MP-1045-CPE
- MP-1055-CPE
- MP-1045-BS3
- MP-1055-BS3
- QB-1045-LNK (2 x QB-1045-EPR)
- QB-1055-LNK (2 x QB-1055-EPR) 2022 Proxim Wireless Corporation, San Jose, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634;
5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. The content described herein are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Wireless Corporation. EdgeTM, Proxim and the Proxim logo are the trademarks of Proxim Wireless Corporation. All other trademarks mentioned herein are the property of their respective owners. Copyright Trademarks Disclaimer Proxim reserves the right to revise this publication and to make changes in content from time-to-time without obligation on the part of Proxim to provide notification of such revision or change. Proxim may make improvements or changes in the product(s) described in this guide at any time. When using these devices, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. GPL License Note EdgeTM products include, in part, some free software that is developed by Free Software Foundation. A user is granted license to this software under the terms of either the GNU General Public License or GNU Lesser General Public License (See http://www.gnu.org/licenses/licenses.html). This license allows the user to freely copy, modify and redistribute this software and no other statement or documentation from us. To get a copy of this software, or for any other information, please contact our customer support team). OpenSSL License Note EdgeTM products contains software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and that is subject to the following copyright and conditions:
Copyright (c) 1998-2016 The OpenSSL Project. All rights reserved. The names OpenSSL Toolkit and OpenSSL Project must not be used to refer to, endorse, or promote the products or for any other purpose related to the products without prior written permission. For written permission, please contact openssl-core@openssl.org. This software is provided by the OpenSSL Project as is and any expressed or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the OpenSSL Project or its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage. EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide Documentation Version: 1.0 P/N 765-00411, February 2022 EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 2 Preface . 4 1 MP/QB-10xx Series - Regulatory Information. 5 Safety Information . 5 Federal Communications Commission (FCC) Compliance . 6 Modifications . 6 FCC Radiation Exposure Statement . 7 Certification Summary . 7 USA (See USA - Certification) . 7 UL (See UL - Certification) . 7 CB (See CB - Test Certificate) . 7 2 Information for Professional Installer . 8 Information for Professional Installers . 8 Adjusting Tx Output Power . 8 Antenna Gain Configuration . 9 A USA - Certification . 10 D UL - Certification . 11 E CB - Test Certificate. 16 EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 3 Preface This document contains the safety and regulatory compliance information for the following EdgeTM products:
Preface About this Guide EdgeTM 10xx Series MP-1045-CPE MP-1055-CPE MP-1045-BS3 MP-1055-BS3 QB-1045-LNK (2 x QB-1045-EPR) QB-1055-LNK (2 x QB-1055-EPR) Related Documents In addition to this guide, please refer to the following documents for EdgeTM Multipoint and Quickbridge products that are available at Proxims support site http://support.proxim.com. Quick Installation Guide (QIG): A quick reference guide that provides essential information for installing and configuring the device. Device Management Guide - A guide that gives an overview of the device user interface and explains the step-by-step procedure to configure, manage and monitor the device by using Graphical User Interface. Software Configuration Guide: A guide that provides software configuration information for Proxim devices. Hardware Installation Guide: A guide that provides a hardware overview and details about the installation procedures and hardware specifications. CLI Guide - A guide that gives instructions on how to configure, manage and monitor the device using Command Line Interface. Proxim recommends you to visit its support site http://support.proxim.com for regulatory information and latest product updates. EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 4 1 MP/QB-10xx Series - Regulatory Information This chapter contains information on the following:
Safety Information Federal Communications Commission (FCC) Compliance Industry Canada Compliance Certification Summary 1.1 Safety Information Listed below are the product(s) and their corresponding safety standards that they comply with:
Product(s) MP-1045-CPE MP-1055-CPE MP-1045-BS3 MP-1055-BS3 QB-1045-LNK (2 x QB-1045-EPR) QB-1055-LNK (2 x QB-1055-EPR) Standards IEC/EN 62368-1:2014(Second Edition) IEC/EN 60950-22:2016(Second Edition) All products are intended to be installed, used, and maintained by experienced telecommunications personnel only. When using these products, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following:
Devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation. Installation of these products in the end use must conform to local regulations and codes. Devices are to be used with and powered only by the Power Injector provided. A 16-amp circuit breaker is required at the power source. The devices are intended to be grounded. Use a 12 AWG earthing conductor at a minimum. Do not connect or disconnect the power cable from the device when the power injector is plugged into an AC power outlet. Devices should be serviced by trained personnels only. Do not disassemble the device. By opening or removing any covers, you may expose yourself to hazardous energy parts. Incorrect reassembly of these devices can cause malfunction and/or electric shock when later used. There are no user serviceable parts; all repairs and services must be handled by a qualified service center. Do not insert any objects of any shape or size inside these devices while powered on. Object may contact hazardous energy parts that could result in a risk of fire or personal injury. Do not remove or alter the marking label provided on these devices. To avoid the risk of electric shock from lightning, do not use these devices during an electrical storm. RJ-45 maximum available current is 1.33A. WARNING: These devices are intended for installation in accordance with Articles 110-18, 110-26, and 110-27, 725, 800, and 810 of the United States National Electric Code ANSINFPA 70. EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 5 MP/QB-10xx Series - Regulatory Information 1.2 Federal Communications Commission (FCC) Compliance The EdgeTM devices comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this device causes harmful interference to radio or television reception, which can be determined by turning the device on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. WARNING:
To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. The device operation is subject to the following two conditions:
1. The device may not cause harmful interference 2. The device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter. The FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. 1.2.1 Modifications WARNING:
The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by the manufacturer may void the users authority to operate the device. The correction of interference caused by unauthorized modification, substitution or attachment will be the responsibility of the user. The manufacturer and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. Modification of this device to receive cellular Radio Telephone service signals is prohibited under FCC Rules and Federal Law. the equipment under FCC Rules. Modifications not expressly approved by the manufacturer could void the user authority to operate EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 6 MP/QB-10xx Series - Regulatory Information 1.2.2 FCC Radiation Exposure Statement The EdgeTM devices comply with FCC radiation exposure limits set forth for an uncontrolled environment. Tabulated below are the products and the FCC radiation exposure limits followed by the devices:
Product(s) Standards MP-1045-CPE MP-1045-BS3 QB-1045-LNK (2 x QB-1045-EPR) Product models using external antennas require professional installation. The antennas used for professional installation must be fixed-mounted on outdoor permanent structures with a minimum separation distance of 50 cm from the antenna to the users. Separation distance should be increased if antenna with more than 16 dBi is used. Separation distance can reach up to 300 cm for high gain (34 dBi) parabolic dish. Antennas must not be co-located and must not operate in conjunction with any other antenna or transmitter. Models Frequency Band Certification/Reference Number MP-1045-CPE-US MP-1045-BS3-US QB-1045-LNK-US
(2 x QB-1045-EPR-US)
(4.940 4.990) GHZ
(5.150 5.250) GHz
(5.725 5.850) GHz FCC ID: HZB-NGPPS Models Certification/Reference Number Pending Certificate Models Certification/Reference Number Pending Certificate 1.3 Certification Summary 1.3.1 USA (See USA - Certification) 1.3.2 UL (See UL - Certification) 1.3.3 CB (See CB - Test Certificate) MP-1045-CPE MP-1055-CPE MP-1045-BS3 MP-1055-BS3 QB-1045-LNK (2 x QB-1045-EPR) QB-1055-LNK (2 x QB-1055-EPR) MP-1045-CPE MP-1055-CPE MP-1045-BS3 MP-1055-BS3 QB-1045-LNK (2 x QB-1045-EPR) QB-1055-LNK (2 x QB-1055-EPR) EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 7 2 Information for Professional Installer This chapter contains information on the following:
Information for Professional Installers Adjusting Tx Output Power Antenna Gain Configuration 2.1 Information for Professional Installers All products must be professionally installed, and the transmit power of the system must be adjusted by the professional installers to ensure that the system EIRP is in compliance with the limit specified by the regulatory authority of the country of application. 2.1.1 Adjusting Tx Output Power NOTE: When the system is set to transmit at the maximum power, professional installers must ensure that the maximum EIRP limit is not exceeded. To achieve this, they may have to add attenuation between the device and the antenna when a high gain antenna is used. Use the following formula in combination with the table of EIRP limits in US and EU countries to calculate system transmit power (based on EIRP limits) of these countries:
Tx Power (dBm) = EIRP Limit (dBm) + FL (dB) G (dB) where, Tx Power = Output power measured at the antenna input EIRP Limit = EIRP limits specified below FL = Feeder loss including loss of connectors G = Antenna Gain Transmit output power can be reduced by using Automatic Transmit Power Control (ATPC), or manually setting the Transmit Power Control (TPC). For information to automatically or manually set TPC, refer to Software Management Guide available at http://support.proxim.com. Regulatory Domain Frequency (MHz) Max EIRP (dBm) PTP Mode (QB) PTMP Mode(MP) US SKU 53 (@ 5MHz) 56 (@ 10 MHz) 59 (@ 20 MHz) 36 (@ 5MHz) 39 (@ 10 MHz) 42 (@ 20 MHz) United States 4.9GHz 4940 ~ 4990 (Non-DFS) United States 5.8GHz 5725 ~ 5850 (Non-DFS) 53 United States3 (5.2, 5.8 GHz) 5150 ~ 5250 (Non-DFS) 53 5725 ~ 5850 (Non-DFS) 36(Base Station), 53(Subscriber Unit) 36(Base Station), 53(Subscriber Unit) IMPORTANT! You must add external attenuation pad if the calculated EIRP is over the limit. If you are at the TPC limit, reduce the power and continue with the attenuation. EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 8 Information for Professional Installer 2.1.2 Antenna Gain Configuration When using external antenna, the professional installer should ensure to configure proper antenna gain so that the radio does not exceed the EIRP allowed per regulatory domain. Calculate the antenna gain as follows:
Antenna Gain to be configured = Antenna Gain of the antenna used - Cable Loss Example: Consider an example where the device is operating in United States 5.3 GHz with the EIRP 30 dBm. The antenna gain of the antenna used is 23 dBi and the cable loss is 1dB. Given this case, Configurable Antenna Gain = [23 dBi 1 dB] = 22 dBi Maximum Radio Power = EIRP Configured Antenna Gain
= 30 dBm 22 dBi
= 8 dBm With this configuration, the ATPC feature will limit the radio power to a maximum of 8 dBm to avoid exceeding EIRP limit of 30 dBm. EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 9 USA - Certification Given below are the USA certification details for the following products:
MP-1045-CPE-US MP-1045-BS3-US QB-1045-LNK-US (2 x QB-1045-EPR-US) A EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 10 D UL - Certification Given below are the products with the authorization to use UL Mark:
MP-1045-CPE MP-1055-CPE MP-1045-BS3 MP-1055-BS3 QB-1045-LNK (2 x QB-1045-EPR) QB-1055-LNK (2 x QB-1055-EPR) EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 11 UL - Certification EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 12 UL - Certification EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 13 UL - Certification EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 14 UL - Certification EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 15 E CB - Test Certificate Given below is the CB Test certification for the following products:
MP-1045-CPE MP-1055-CPE MP-1045-BS3 MP-1055-BS3 QB-1045-LNK (2 x QB-1015-EPR) QB-1055-LNK (2 x QB-1025-EPR) EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 16 CB - Test Certificate EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 17 CB - Test Certificate EdgeTM Multipoint and Quickbridge - Safety and Regulatory Guide 18