GB130MG User Manual EGPRS/LTE Cat-M1/LTE Cat-NB2/GNSS Tracker TRACGB130MGUM001 Version: 1.00 GB130MG User Manual Document Title GB130MG User Manual Revision Date Status 1.01 2021-11-9 Release Document Control ID TRACGB130MGUM001 information, independent search for additional relevant General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not including any undertaken any information that may be in the customers possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customers system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of Queclink Limited. The copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of grant of a patent or the registration of a utility model or design. All specifications supplied herein are subject to change without notice at any time. TRACGB130MGUM001 - 1 -
GB130MG User Manual Contents Contents ............................................................................................................................................ 2 Table Index ........................................................................................................................................ 3 Figure Index ....................................................................................................................................... 3 0. Revision History ........................................................................................................................... 4 1. Introduction ................................................................................................................................... 5 1.1. Reference ............................................................................................................................. 5 2. Product Overview ......................................................................................................................... 6 2.1. Check Parts List .................................................................................................................. 6 2.2. Parts List .............................................................................................................................. 7 2.3. Interface Definition ............................................................................................................. 7 3. Getting Started .............................................................................................................................. 8 3.1. Open the Case...................................................................................................................... 8 3.2. Close the Case ..................................................................................................................... 9 3.3. Install a SIM Card ............................................................................................................. 10 3.4. Power Connection ............................................................................................................. 13 3.5. Motion Sensor Direction ................................................................................................... 15 TRACGB130MGUM001 - 2 -
GB130MG User Manual TABLE 1. GB130MG PROTOCOL REFERENCE ............................................................................................. 5 TABLE 2. PARTS LIST .................................................................................................................................. 7 TABLE 3. DESCRIPTION OF 2-PIN POWER CABLE ...................................................................................... 7 TABLE 4. DEFINITION OF DEVICE STATUS AND LED ................................................................................. 14 Table Index TRACGB130MGUM001 - 3 -
GB130MG User Manual 0. Revision History Version Date Author Description of Change 1.00 2021-11-09 Eric Xu Initial TRACGB130MGUM001 - 4 -
GB130MG User Manual 1. Introduction The GB130MG is a device designed for self-installation. It simply mounts directly onto the vehicles battery with only two wires to attach. This approach allows for either a very low cost installation or for the insurance customer to self-install. Its built-in GNSS receiver has very high sensitivity, a fast time to first fix and supports 1Hz (every second) location sampling during vehicle motion. Its built-in Bluetooth can be used for data transmission. Its multiband LTE Cat-M1 and Cat-NB2 allow the GB130MG location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection, 800Hz pre/post incident data collection, and extends battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery, and scheduled and compressed GNSS position. 1.1. Reference Table 1. GB130MG Protocol Reference SN Document Name Remark
[1] GB130MG @Track Air Interface Protocol The air protocol interface between GB130MG and backend server. TRACGB130MGUM001 - 5 -
GB130MG User Manual 2. Product Overview 2.1. Check Parts List Before starting, check all the following items have been included with your GB130MG. If anything is missing, please contact your supplier. Figure 1. Appearance of GB130MG TRACGB130MGUM001 - 6 -
GB130MG User Manual Table 2. Parts List Name Picture 2.2. Parts List GB130MG Locator 2.3. Interface Definition The GB130MG has a 2-pin power cable. The definition of the 2-pin power cable is shown below. Table 3. Description of 2-Pin Power Cable Index Colour Definition Description 1 2 Red Black VIN GND Ground External DC power input, 8-32V TRACGB130MGUM001 - 7 -
GB130MG User Manual 3. Getting Started 3.1. Open the Case Remove 6pcs screws from the device, insert the triangular-pry-opener into the gap of the case and push the opener up until the case is unsnapped. Figure 2. Open the Case TRACGB130MGUM001 - 8 -
GB130MG User Manual 3.2. Close the Case Step_1: Put the motherboard into the front case. Step_2: Make sure the silicon rubber seal ring is in the gap of the front case and the power cable wire holder is in the rubber groove of the rear case. Step_3: Insert the battery connector into the socket. TRACGB130MGUM001 - 9 -
GB130MG User Manual Step_4: Place the cover on the bottom, press the cover until it snaps into place, and tighten the screws. Figure 3. Close the Case 3.3. Install a SIM Card Step_1: Slide the holder to the left to open the SIM card holder. Step_2: Place the SIM card on the holder with the gold-colour contact area facing down. Take care to align the cut mark. TRACGB130MGUM001 - 10 -
GB130MG User Manual Step_4: Slide the holder to the right to close the SIM card holder. Step_5: Close the case. TRACGB130MGUM001 - 11 -
GB130MG User Manual Figure 4. Install a SIM Card TRACGB130MGUM001 - 12 -
GB130MG User Manual 3.4. Power Connection VIN (PIN1) / GND (PIN2) are the power input pins. The input voltage range for this device is 8V to 32V. The device is designed to be installed in vehicles that operate on 12V/24V vehicle without the need for external transformers. Figure 5. Typical Power Connection Note:
1. Do not connect any external cable on the GB130MG device. 2. The GB130MG simply mounts directly onto the vehicles battery with only two wires to attach. It should be installed and operated with a minimum distance of 20cm from human body. TRACGB130MGUM001 - 13 -
GB130MG User Manual LED Status Table 4. Definition of Device Status and LED Device Status Working normally LED Status Continuous on PDP context not activated Flashing pattern 1: 100ms On, 2s Off Network not registered or SIM card not inserted Flashing pattern 2: 100ms On, 500ms Off, 100ms On, 2s Off GNSS location not fixed Flashing pattern 3: 100ms On, 500ms off, 100ms On, 500ms Off, 100ms On, 2s off PDP context not activated and GNSS location not fixed Flashing pattern 4: 100ms On, 2s Off, 100ms On, 500ms Off, 100ms On, 500ms Off, 100ms On, 2s Off Network not registered or SIM card not inserted and GNSS location not fixed Flashing pattern 5: 100ms On, 500ms Off, 100ms On, 2s Off, 100ms On, 500ms Off, 100ms On, 500ms Off, 100ms On, 2s Off SVR Paired successfully Flashing pattern 6: 2s on, 2s off, for 40 seconds. Device power off or sleep mode Off Figure 6. GB130MG LED on the Case TRACGB130MGUM001 - 14 -
GB130MG User Manual 3.5. Motion Sensor Direction GB130MG has an internal 3-axis accelerometer supporting driving behaviour monitoring and motion detection. The following shows the directions of the motion sensor. The Z axis points vertically outward. Figure 7. Motion Sensor Direction TRACGB130MGUM001 - 15 -
radiation exposure limits set forth for an uncontrolled This equipment complies with FCC environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.