Raspberry Pi Regulatory Compliance and Safety Information Product Name: Raspberry Pi Zero W IMPORTANT PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE Warnings This product shall only be connected to an external power supply rated at 5V dc, and a minimum current of 2A. Any external power supply used with the Raspberry-Pi shall comply with relevant regulations and standards applicable in the country of intended use. This product should not be overclocked as this may make certain components very hot. This product should be operated in a well ventilated environment and should not be covered. This product should be placed on a stable, flat, non-conductive surface in use and should not be contacted by conductive items. Instructions for safe use To avoid malf unct ion or damage t o your Raspberry Pi please observe t he f ollow ing:
Do not expose it t o w at er, moisture or place on a conduct ive surf ace w hilst in operat ion. Do not expose it t o heat f rom any source; t he Raspberry Pi is designed f or reliable operat ion at normal ambient room t emperat ures. Take care w hilst handling t o avoid mechanical or elect rical damage t o t he print ed circuit board and connect ors. Avoid handling t he Raspberry Pi w hile it is pow ered. Only handle by t he edges t o minimize t he risk of elect rost at ic discharge damage. All peripherals used w it h t he Raspberry Pi should comply w it h relevant st andards f or t he count ry of use and be marked accordingly t o ensure t hat safet y and perf ormance requirement s are met . These art icles include but are not limit ed t o keyboards, monit ors and mice used in conjunct ion w ith t he Raspberry Pi. Compliance Information The Raspberry Pi complies with the relevant provisions of the RoHS Directive for the European Union. WEEE Directive Statement for the European Union In common with all Electronic and Electrical products the Raspberry Pi should not be disposed of in household waste. Alternative arrangements may apply in other jurisdictions. EMC Compliance Statements European Union (EU) Electromagnetic Compatibility Directive Compliance Statement This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to the European Standard EN 55022. Warning: This is an EN 55022 Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Hereby, Raspberry Pi, declares that this single board computer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A full copy of the Declaration of Conformity can be found at www.raspberrypi.org/pi3/doc.pdf Federal Communications Commission (FCC) Emissions Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with the FCC radiation exposure limits for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the user and this device. This transmitter must not be co-located or operated with any other antenna or transmitter Industry Canada Class B Emissions Compliance Statement This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage,
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and all persons. Cet appareil est conforme aux limitations de la norme IC RSS102 concernant lexposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis en respectant une distance minimale de 20cm entre le radiateur et toutes les personnes. www.raspberrypi.org