FCC ID: 2ABCB-PICOW Single Board Micro-Computer

Raspberry Pi Pico W Safety and User guide Designed and distributed by Raspberry Pi Ltd Maurice Wilkes Building Cowley Road Cambridge CB4 0DS UK www.raspberrypi.com Raspberry Pi Regulatory compliance and safety information Product name: Raspberry Pi Pico W IMPORTANT: PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. Warnings Any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use. The power supply should provide 5V DC and a minimum rated current of 1A. Instructions for safe use This product should not be overclocked. Do not expose this product to water or moisture, and do not place it on a conductive surface whilst in operation. Do not expose this product to heat from any source; it is designed for reliable operation at normal room temperatures. Do not expose board to high intensity light sources (e.g. xenon flash or laser) Operate this product in a well-ventilated environment, and do not cover it during use. Place this product on a stable, flat, non-

conductive surface while in use, and do not let it contact conductive items. Take care while handling this product to avoid mechanical or electrical damage to the printed circuit board and connectors. Avoid handling this product while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge damage. Any peripheral or equipment used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. Such equipment includes, but is not limited to, keyboards, monitors, and mice. For all compliance certificates and numbers, please visit www.raspberrypi.com/compliance. Raspberry Pico W Raspberry Pi 5V DC 1A

, Raspberry Pi www.raspberrypi.com/compliance etina Raspberry Pi Pico W DLEIT: TUTO INFORMACI SI PONECHTE PRO POUIT V BUDOUCNU. Varovn Kad extern napjec zdroj pouit s Raspberry Pi mus splovat pslun pedpisy a normy platn v zemi uren. Napjec zdroj by ml poskytovat stejnosmrn napt 5V a minimln jmenovit proud 1A. Pokyny pro bezpen pouvn Tento vrobek by neml bt petaktovn. Vrobek nevystavujte vod ani vlhkosti a za provozu ho neumisujte na vodiv povrch. Vrobek nevystavujte teplu z jakhokoli zdroje; je navren pro spolehliv provoz pi normlnch pokojovch teplotch. Nevystavujte desku svtelnm zdrojm s vysokou intenzitou (nap. Xenonov blesk nebo laser) Vrobek pouvejte v dobe vtranm prosted a za provozu ho nepikrvejte. Vrobek pi pouvn ponechte na stabilnm, plochm a nevodivm povrchu a zabrate jeho dotyku s vodivmi pedmty. Pi manipulaci s vrobkem dbejte na to, abyste zabrnili mechanickmu nebo elektrickmu pokozen desky plonch spoj a konektor. Vyvarujte se manipulace s vrobkem, kdy je napjen. K manipulaci pouvejte pouze okraje, abyste minimalizovali riziko pokozen elektrostatickm vbojem. Veker perifern a dal zazen pouvan s Raspberry Pi by mla bt v souladu s pslunmi normami zem pouit a mla by bt odpovdajcm zpsobem oznaena, aby se zajistilo, e spluj poadavky na bezpenost a vkon. Vechna osvden o shod a sla najdete na www.raspberrypi.com/compliance. Dansk Raspberry Pi Pico W VIGTIGT: OPBEVAR DENNE INFORMATION FOR FREMTIDIG REFERENCE. Advarsler Eksterne strmforsyninger, der anvendes til Raspberry Pi skal vre i overensstemmelse med relevante bestemmelser og standarder, som er gldende i det land, hvor anvendelsen er tiltnkt. Strmforsyningen skal give 5 V jvnstrm og en nominel strmstyrke p mindst 1A. Instruktioner for sikker brug Dette produkt m ikke overophedes. Udst ikke dette produkt for vand eller fugt, og st det ikke p en ledende overflade under drift. Udst ikke dette produkt for varme fra nogen kilder; det er designet til plidelig drift ved normal stuetemperatur. Udst ikke kortet for lyskilder med hj intensitet (f.eks. Xenon-flash eller laser) Anvend dette produkt i et godt ventileret milj, og tildk det ikke under brug. Anbring dette produkt p en stabil, flad og ikke-ledende overflade under brug, og lad det ikke komme i berring med ledende genstande. Vr forsigtig ved hndtering af dette produkt for at undg mekanisk eller elektrisk beskadigelse af printkort og stik. Undg hndtering af dette produkt, mens det er tndt. M kun hndteres ved at holde i kanterne for at minimere risikoen for skader ved elektrostatisk udladning. Alt perifert udstyr eller udstyr, der anvendes til Raspberry Pi skal overholde relevante standarder i landet for anvendelse og mrkes i overensstemmelse hermed for at sikre, at kravene for sikkerhed og ydeevne er opfyldt. For alle overensstemmelsescertifikater og numre, g p www.raspberrypi.com/compliance. Nederlands Raspberry Pi Pico W BELANGRIJK: BEWAAR DEZE INFORMATIE VOOR TOEKOMSTIGE VERWIJZING. Waarschuwingen Elke externe voeding die met de Raspberry Pi wordt gebruikt, moet voldoen aan de relevante voorschriften en normen die van toepassing zijn in het land van het beoogde gebruik. De voeding moet 5V DC en een minimale nominale stroom van 1A leveren. Instructies voor veilig gebruik Dit product mag niet overklokt worden. Stel dit product niet bloot aan water of vocht en plaats het tijdens gebruik niet op een geleidend oppervlak. Stel dit product niet bloot aan warmte van welke bron dan ook; het is ontworpen voor betrouwbare werking bij normale kamertemperatuur. Stel het bord niet bloot aan lichtbronnen met een hoge intensiteit (bijv. Xenonflits of laser) Gebruik dit product in een goed geventileerde omgeving en dek het niet af tijdens gebruik. Plaats dit product tijdens het gebruik op een stabiel, plat, niet-geleidend oppervlak en laat het niet in contact komen met geleidende items. Wees voorzichtig met het gebruik van dit product om mechanische of elektrische schade aan de printplaat en connectoren te voorkomen. Gebruik dit product niet terwijl het wordt gevoed. Alleen aan de randen vasthouden om het risico op schade door elektrostatische ontlading te minimaliseren. Alle randapparatuur of apparatuur die met de Raspberry Pi wordt gebruikt, moet voldoen aan de relevante normen voor het land van gebruik en dienovereenkomstig worden gemarkeerd om ervoor te zorgen dat wordt voldaan aan de veiligheids- en prestatie-eisen. Ga naar www.raspberrypi.com/compliance. Suomi Raspberry Pi Pico W TRKE: SILYT NM TIEDOT MYHEMMN KYTN VARALTA. Varoituksia Kaikkien ulkoisen Raspberry Pi -laitteessa kytettyjen virtalhteiden on noudatettava kyttmaassa sovellettavia asiaankuuluvia asetuksia ja standardeja. Virtalhteen virran on oltava 5V DC minimin nimellisvirran ollessa 1A. Ohjeet turvallista kytt varten Tt tuotetta ei saa ylikuormittaa. l altista tt tuotetta vedelle tai kosteudelle, lk aseta sit johtavalle pinnalle sen ollessa toiminnassa. l altista tt tuotetta mistn lhteest aiheutuvalle kuumuudelle; se on suunniteltu luotettavaa toimintaa varten normaaleissa huonelmptiloissa. l altista korttia korkean intensiteetin valonlhteille (esim. Ksenonlamppu tai laser) Kyt tt tuotetta hyvin ilmastoidussa lmptilassa, lk peit sit kytn aikana. Aseta tm tuote vakaalle, tasaiselle, ei-

johtavalle pinnalle sen ollessa kytss, lk anna sen koskettaa johtavia kohteita. Noudata varovaisuutta tt tuotetta ksiteltess mekaanisen tai shkisen vaurioitumisen estmiseksi painetulle piirilevylle ja liittimille. Vlt tmn tuotteen ksittely sen ollessa kytkettyn virtalhteeseen. Ksittele vain reunoista shkstaattisen purkautumisen vaaran minimoimiseksi. Kaikkien Raspberry Pi -laitteiden kanssa kytettvien oheislaitteiden ja muiden laitteiden on oltava kyttmaan asianmukaisten standardien mukaisia, ja niiden on oltava merkittyj sen varmistamiseksi, ett turvallisuus ja suorituskykyvaatimukset tytetn. Listietojen saamiseksi kaikista vaatimustenmukaisuussertifikaateista vieraile verkkosivustolla www.raspberrypi.com/compliance. Franais Raspberry Pi Pico W IMPORTANT: VEUILLEZ CONSERVER CETTE INFORMATION POUR VOUS Y REPORTER ULTRIEUREMENT. Avertissements Toute alimentation lectrique externe utilise avec le Raspberry Pi doit tre conforme aux rglementations et normes applicables dans le pays d'utilisation. L'alimentation lectrique doit fournir 5 V CC et un courant nominal minimum de 1A. Consignes pour une utilisation en toute scurit Ce produit ne doit pas tre utilis une vitesse suprieure celle prvue pour son usage. N'exposez pas ce produit l'eau ou l'humidit et ne le placez pas sur une surface conductrice pendant le fonctionnement. N'exposez pas ce produit la chaleur quelle qu'en soit la source; il est conu pour un fonctionnement fiable des tempratures ambiantes normales. N'exposez pas la carte des sources de lumire de haute intensit (par exemple flash au xnon ou laser) Faites fonctionner ce produit dans un environnement bien ventil et ne le couvrez pas pendant l'utilisation. Placez ce produit sur une surface stable, plane et non conductrice pendant son utilisation et ne le laissez pas en contact avec des lments conducteurs. Faites attention lors de la manipulation de ce produit pour viter tout dommage mcanique ou lectrique au niveau de la carte de circuit imprim et des connecteurs. vitez de manipuler ce produit lorsqu'il est sous tension. Ne manipulez que par les bords afin de minimiser les risques de dommages dus aux dcharges lectrostatiques. Tout priphrique ou quipement utilis avec le Raspberry Pi doit tre conforme aux normes applicables dans le pays d'utilisation et tre marqu en consquence pour garantir la scurit et les performances. Pour tous les certificats et numros de conformit, veuillez consulter www.raspberrypi.com/compliance Deutsch Raspberry Pi Pico W WICHTIG: BITTE BEWAHREN SIE DIESE INFORMATIONEN FR ZUKNFTIGE REFERENZ. Achtung Jedes externe Netzteil, das mit dem Raspberry Pi verwendet wird, muss den einschlgigen Vorschriften und Normen entsprechen, die im Bestimmungsland gelten. Die Stromversorgung sollte 5 V Gleichstrom und einen minimalen Nennstrom von 1A liefern. Anweisungen fr die sichere Verwendung Dieses Produkt sollte nicht bertaktet werden. Setzen Sie dieses Produkt nicht Wasser oder Feuchtigkeit aus und stellen Sie es whrend des Betriebs nicht auf eine leitfhige Oberflche. Setzen Sie dieses Produkt keiner Wrmequelle aus. Es ist fr einen zuverlssigen Betrieb bei normalen Raumtemperaturen ausgelegt. Stel het bord niet bloot aan lichtbronnen met een hoge intensiteit (bijv. Xenonflits of laser) Betreiben Sie dieses Produkt in einer gut belfteten Umgebung und decken Sie es whrend des Gebrauchs nicht ab. Stellen Sie dieses Produkt whrend des Gebrauchs auf eine stabile, flache, nicht leitende Oberflche und lassen Sie es nicht mit leitfhigen Gegenstnden in Berhrung kommen. Seien Sie vorsichtig beim Umgang mit diesem Produkt, um mechanische oder elektrische Schden an der Leiterplatte und den Anschlssen zu vermeiden. Vermeiden Sie die Handhabung dieses Produkts whrend der Stromversorgung. Produkt nur an den Rndern anfassen, um das Risiko von elektrostatischen Entladungsschden zu minimieren. Alle Peripheriegerte oder Gerte, die mit dem Raspberry Pi verwendet werden, mssen den geltenden Normen fr das jeweilige Land entsprechen und entsprechend gekennzeichnet sein, um zu gewhrleisten, dass die Sicherheits- und Leistungsanforderungen erfllt werden. Alle Konformittszertifikate und -nummern finden Sie auf www.raspberrypi.com/compliance . Italiano Raspberry Pi Pico W IMPORTANTE: CONSERVARE QUESTE INFORMAZIONI PER RIFERIMENTO FUTURO. Avvisi Tutti gli alimentatori esterni utilizzati con il Raspberry Pi devono essere conformi alle normative e agli standard pertinenti applicabili nel paese di utilizzo previsto. L'alimentatore utilizzato dovr fornire 5 V CC e una corrente nominale minima di 1A. Istruzioni per lutilizzo in sicurezza Questo prodotto non deve essere overcloccato. Non esporre questo prodotto allacqua o allumidit e non collocarlo su una superficie conduttiva mentre in funzione. Non esporre questo prodotto a fonti di calore. Il prodotto progettato per un funzionamento affidabile solo alla normale temperatura ambiente. Non esporre la scheda a fonti di luce ad alta intensit (ad esempio flash allo xeno o laser) Utilizzare questo prodotto in un ambiente ben ventilato e non coprirlo durante luso. Per luso, collocare questo prodotto su una superficie stabile, piana e non conduttiva. Evitare che venga in contatto con oggetti conduttivi. Durante luso o lo spostamento del prodotto prestare attenzione ad evitare danni meccanici o elettrici al circuito stampato e ai connettori. Evitare di maneggiare questo prodotto mentre alimentato. Afferrare solo dai bordi per ridurre al minimo il rischio di danni da scariche elettrostatiche. Tutte le periferiche e le apparecchiature utilizzate con il Raspberry Pi devono essere conformi agli standard pertinenti per il paese di utilizzo ed essere dotate del relativo marchio a garanzia della conformit con i requisiti di sicurezza e prestazioni necessari. Per informazioni su numeri e certificati di conformit, visitare www.raspberrypi.com/compliance. Raspberry Pi Pico W

Raspberry Pi 5V DC 1A Raspberry Pi www.raspberrypi.com/compliance Raspberry Pi Pico W

. Raspberry Pi

. 5V DC, 1A

. Raspberry Pi

. www.raspberrypi.com/compliance. Polski Raspberry Pi Pico W WANE: PROSIMY ZACHOWA TE INFORMACJE NA PRZYSZO. Ostrzeenia Wszelkie zewntrzne rda zasilania uywane z Raspberry Pi powinny by zgodne z odpowiednimi przepisami i normami obowizujcymi w kraju przeznaczenia. Zasilacz powinien zapewnia napicie 5V DC i minimalny prd znamionowy 1A. Instrukcje bezpiecznego uytkowania Ten produkt nie powinien by przetaktowany. Nie naley wystawia tego produktu na dziaanie wody ani wilgoci, ani umieszcza go na powierzchni przewodzcej podczas pracy. Nie naley wystawia tego produktu na dziaanie ciepa z jakiegokolwiek rda;

produkt zaprojektowano tak, aby dziaa niezawodnie w normalnej temperaturze pokojowej. Nie wystawiaj pyty na dziaanie rde wiata o wysokiej intensywnoci (np. Ksenonowej lampy byskowej lub lasera) Uywa w dobrze wentylowanym otoczeniu i nie zakrywa podczas uytkowania. Podczas uytkowania naley umieci produkt na stabilnej, paskiej, nieprzewodzcej powierzchni i nie dopuci do kontaktu z przedmiotami przewodzcymi prd. Naley zachowa ostrono podczas obchodzenia si z produktem, aby unikn mechanicznego lub elektrycznego uszkodzenia pyty z obwodami drukowanymi i zczy. Nie naley przenosi produktu, gdy jest podczony do zasilania. Trzyma wycznie za krawdzie, aby zminimalizowa ryzyko uszkodzenia w wyniku wyadowa elektrostatycznych. Wszelkie urzdzenia peryferyjne lub sprzt uywany z Raspberry Pi powinny by zgodne z odpowiednimi normami dla kraju uytkowania i by odpowiednio oznakowane, aby zapewni spenienie wymaga bezpieczestwa i wymogw eksploatacyjnych. Wszystkie certyfikaty zgodnoci i numery mona znale na stronie www.raspberrypi.com/compliance. Portugus do Brasil Raspberry Pi Pico W IMPORTANTE: POR FAVOR, GUARDE ESTAS INFORMAES PARA REFERNCIA FUTURA. Avisos Qualquer fonte de alimentao externa usada com o Raspberry Pi deve cumprir os regulamentos e normas aplicveis no pas de utilizao. A fonte de alimentao deve fornecer 5V CC e uma corrente nominal mnima de 1A. Instrues para o uso seguro Este produto no deve ser usado em overclock. No exponha este produto gua ou umidade, e no o coloque em uma superfcie condutora durante a operao. No exponha este produto ao calor de qualquer fonte; Ele projetado para operao confivel temperatura ambiente. No exponha a placa a fontes de luz de alta intensidade (por exemplo, flash xenon ou laser) Opere este produto em um ambiente bem ventilado e no o cubra durante o uso. Coloque este produto em uma superfcie estvel, plana e no condutora durante o uso, e no deixe que entre em contato com dispositivos que conduzem eletricidade. Tome cuidado ao manusear este produto para evitar danos mecnicos ou eltricos placa de circuito impresso e aos conectores. Evite manusear este produto enquanto estiver ligado. Somente manuseie pelas bordas (laterais) para minimizar o risco de dano por descarga eletrosttica. Qualquer perifrico ou equipamento usado com o Raspberry Pi deve cumprir os padres de fabricao e uso relevantes para o pas e assim garantir que os requisitos de segurana e desempenho sejam atendidos. Para todos os certificados conformidade e nmeros, visite www.raspberrypi.com/compliance. P Raspberry Pi Pico W

Raspberry Pi,

. 5 1.

, Raspberry Pi,

, , www.raspberrypi.com/compliance . Espaol Raspberry Pi Pico W IMPORTANTE: POR FAVOR CONSERVE ESTA INFORMACIN PARA FUTURA REFERENCIA. Advertencias

, xxxYYY APPROVED Cualquier fuente de alimentacin externa utilizada con la Raspberry Pi deber cumplir con las correspondientes regulaciones y normas aplicables en el pas de uso previsto. La fuente de alimentacin debe proporcionar 5V DC y una corriente nominal mnima de 1A. Instrucciones para un uso seguro Este producto no debe ser usado con una frecuencia de reloj superior a la nominal.

(No se debe overclockear). No exponga este producto al agua o a la humedad, y no lo coloque sobre una superficie conductora mientras est en funcionamiento. No exponga este producto a ningn tipo de fuente de calor; est diseado para un funcionamiento fiable a temperatura ambiente normal. No exponga la placa a fuentes de luz de alta intensidad (por ejemplo, flash de xenn o lser) Utilice este producto en un ambiente bien ventilado, y no lo cubra durante el uso. Coloque este producto sobre una superficie estable, plana y no conductora mientras est en uso, y no permita que entre en contacto con elementos conductores. Tenga cuidado al manipular este producto para evitar daos mecnicos o elctricos en la placa de circuito impreso y en los conectores. Evite manipular este producto mientras est encendido. Sujtelo solo por los bordes para minimizar el riesgo de daos por descargas electrostticas. Cualquier perifrico o equipo utilizado con la Raspberry Pi debe cumplir con las normas aplicables en el pas de uso y debe estar marcado en consecuencia para garantizar que se cumplen los requisitos de seguridad y rendimiento. Para obtener todos los certificados de conformidad y sus nmeros de registro, visite www.raspberrypi.com/compliance. Svenska Raspberry Pi Pico W VIKTIGT: BEHLL DENNA INFORMATION FR FRAMTIDA REFERENS. Varningar Alla externa strmfrsrjningar som anvnds med Raspberry Pi mste uppfylla alla tillmpliga regler och standarder i det land dr de anvnds. Strmfrsrjningen mste tillhandahlla 5 VDC och ha en lgsta mrkstrm p 1A. Instruktioner fr sker anvndning Produkten br inte verklockas. Utstt inte produkten fr vatten eller fukt, och placera den inte p en ledande yta medan den r i drift. Utstt inte produkten fr vrme frn ngon vrmeklla. Den r utformad fr tillfrlitlig drift vid normal rumstemperatur. Utstt inte kortet fr ljuskllor med hg intensitet (t.ex. xenon-blixt eller laser) Anvnd produkten i en vl ventilerad milj, och tck inte ver den vid anvndning. Placera produkten p en stabil, isolerad yta vid anvndning, och lt den inte komma i kontakt med ledande freml. Var frsiktig nr du hanterar produkten fr att undvika mekaniska eller elektriska skador p kretskortet och kontakterna. Undvik att hantera produkten med strmmen p. Hll den endast i kanterna fr att undvika elektrostatiska urladdningar. Eventuell kringutrustning och utrustning som anvnds med Raspberry Pi mste uppfylla relevanta standarder i det land dr den anvnds, och den br mrkas s att skerhets- och prestandakraven uppfylls. Besk www.raspberrypi.com/compliance, fr alla certifikat och nummer om verensstmmelse. EU Radio Equipment Directive (2014/53/EU) Declaration of Conformity (DoC) We, Raspberry Pi Limited, Maurice Wilkes Building, Cowley Road, Cambridge, CB4 0DS, United Kingdom, Declare under our sole responsibility that the product: Raspberry Pi Pico W to which this declaration relates is in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive

(2014/53/EU). The product is in conformity with the following standards and/or other normative documents:

SAFETY (art 3.1.a): IEC 60950-1: 2005 (2nd Edition) and EN 62311: 2008 EMC (art 3.1.b): EN 301 489-1/ EN 301 489-17 Ver. 3.1.1 (assessed in conjunction with ITE standards EN 55032 and EN 55024 as Class B equipment) SPECTRUM (art 3. 2): EN 300 328 Ver 2.1.1, EN 301 893 V2.1.0 In accordance with Article 10.8 of the Radio Equipment Directive: The device Raspberry Pi Pico W operates in compliance with harmonised standard EN 300 328 v2.1.1 and transceives within the frequency band 2,400 MHz to 2,483.5 MHz and, as per Clause 4.3.2.2 for wideband modulation type equipment, operates at a maximum e.i.r.p. of 20dBm. The device Raspberry Pi Pico W also operates in compliance with harmonised standard EN 301 893 V2.1.1.). In accordance with Article 10.10 of the Radio Equipment Directive, and as per below list of country codes, the operating bands 5150-

5350MHz are strictly for indoor usage only. BE BG CZ DK DE EE IE EL ES FR HR LV LT LU IT H U CY MT NL AT PL PT RO SI SK FI SE UK The Raspberry Pi complies with the relevant provisions of the RoHS Directive for the European Union. WEEE Directive Statement for the European Union This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Note: A full online copy of this Declaration can be found at www.raspberrypi.com/compliance/

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. FCC Raspberry Pi Pico W FCC ID: 2ABCB-PICOW This device complies with Part 15 of FCC Rules, Operation is Subject to following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user s authority to operate the equipment. This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. For products available on the USA/Canada market, only channels 1 to 11 are available for 2.4GHz WLAN This device and its antenna(s) must not be co-

located or operation in conjunction with any other antenna or transmitter except in accordance with FCCs multi-transmitter procedures. IMPORTANT NOTE: FCC Radiation Exposure Statement; Co-location of this module with other transmitter that operate simultaneously are required to be evaluated using the FCC multi-

transmitter procedures. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device contains an integral antenna hence, the device must be installed to so that a separation distance of at least 20cm from all persons. ISED Raspberry Pi Pico W IC: 20953-PICOW This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. For products available on the USA/Canada market, only channels 1 to 11 are available for 2.4GHz WLAN Selection of other channels is not possible. Pour les produits disponibles sur le march USA /

Canada, seuls les canaux 1 11 sont disponibles pour le rseau local sans fil 2,4 GHz. La slection d'autres canaux n'est pas possible. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-

102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum separation distance of 20cm between the device and all persons. Cet quipement est conforme aux limites d'exposition au rayonnement IC RSS-102 dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance de sparation minimale de 20 cm entre l'appareil et toutes les personnes. INTEGRATION INFORMATION FOR THE OEM It is the responsibility of the OEM / Host product manufacturer to ensure continued compliance to FCC and ISED Canada certification requirements once the module is integrated in to the Host product. Please refer to FCC KDB 996369 D04 for additional information. The module is subject to the following FCC rule parts: 15.207, 15.209, 15.247, 15.401And 15.407 Host Product User Guide Text FCC Compliance This device complies with Part 15 of FCC Rules, Operation is Subject to following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received including interference that cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user s authority to operate the equipment. This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. For products available in the USA/Canada market, only channels 1 to 11 are available for 2.4GHz WLAN. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter except in accordance with FCCs multi-transmitter procedures. ISED Canada Compliance This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.For products available in the USA/Canada market, only channels 1 to 11 are available for 2.4GHz WLAN Selection of other channels is not possible.Pour les produits disponibles sur le march USA / Canada, seuls les canaux 1 11 sont disponibles pour le rseau local sans fil 2,4 GHz. La slection d'autres canaux n'est pas possible. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-

localiss ou fonctionnement en association avec une autre antenne ou transmetteur. IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum separation distance of 20cm between the device and all persons. Cet quipement est conforme aux limites d'exposition au rayonnement IC RSS-102 dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance de sparation minimale de 20 cm entre l'appareil et toutes les personnes. Host Product Labelling; The host product must be labelled with the following information:

"Contains TX FCC ID: 2ABCB-PICOW"

"Contains IC: 20953-PICOW "

This device complies with Part 15 of FCC Rules, Operation is Subject to following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received including interference that cause undesired operation. Important Notice to OEMs:

The FCC Part 15 text must go on the Host product unless the product is too small to support a label with the text on it. It is not acceptable just to place the text in the user guide. E-Labelling It is possible for the Host product to use e-labelling providing the Host product supports the requirements of FCC KDB 784748 D02 e labelling and ISED Canada RSS-Gen, section 4.4. E-labelling would be applicable for the FCC ID, ISED Canada certification number and the FCC Part 15 text. Changes in Usage Conditions of this Module This device has been approved as a Mobile device in accordance with FCC and ISED Canada requirement. This means that there must be a minimum separation distance of 20cm between the Modules antenna and any persons. A change in use that involves a separation distance 20cm

(Portable usage) between the Modules antenna and any persons is a change in the RF exposure of the module and, hence, is subject to a FCC Class 2 Permissive Change and a ISED Canada Class 4 Permissive Change policy in accordance with FCC KDB 996396 D01 and ISED Canada RSP-100. As noted above, This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. If the device is co-located with multiple antennas, the module could be subject to a FCC Class 2 Permissive Change and a ISED Canada Class 4 Permissive Change policy in accordance with FCC KDB 996396 D01 and ISED Canada RSP-100. In accordance with FCC KDB 996369 D03, section 2.9, test mode configuration information is available from the Module manufacturer for the Host (OEM) product manufacturer. Spain La operacin de este equipo est sujeta a las siguientes dos condiciones1. Es posible que este equipo o dispositivo no cause interferencia perjudicial.2. Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operacin no deseada. Australia and New Zealand Class B Emissions Compliance Statement Warning: This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Japan In door use only, except for connection to Base stations or Land mobile relay stations for a 5.2 GHz band high-power data communication system. Do not apply DC voltage to PoE pins. 5.2GHz R xxx T xxx South Korea KCC: YYY XXX

(, ) 20cm

. China CMIIT ID XXXYYY Anatel: XXX IFETEL: XXX TRA Registered no. XXX

TP2 TP3 ee VBUS ) eno] r GPO cx VSYS TPI GP GND GND

@@ 3v3.4N rp4say 62 ee 83 cs OF GD 0c _vReF pgm = Pk Ow

@ @ 6P28_A2 ces @@

@@ 626 A0 ch? @@

@@me <(ipc new

= a sme w22F3 F(| on Ow FCC [D:2ABCB-PICOW

@@ 619 1C:20953-P1COW Gp12 @@

Uses technology licensed from Cx o GP18 0! Abracon GP13 cx) ee GND au ee

@@ Pi6 G15 @@

Raspberry Pi Ltd Maurice Wilkes Building Cowley Road Cambridge CB4 0DS Web http://raspberrypi.com Raspberry Pi Ltd

-Letter of Authorization-

TO WHOM IT MAY CONCERN This letter is to declare that Alex Branton of Eurofins York Limited and his associates have been authorized by Raspberry Pi Ltd to act on our behalf for all acts relating to the approval of the following product:

Applicant Product Description Model Brand Manufacturer Raspberry Pi Ltd Single Board Microcomputer Raspberry Pi Pico W Raspberry Pi Raspberry Pi Ltd Sincerely, Page 1 of 1 DocuSign Envelope ID: F7D3ECDC-E64E-4B39-B8CF-0BA0CEAA53AE03 May 2022 | 16:27 BSTJames AdamsRaspberry Pi (Trading) Ltd.Chief Operating Officer

REQUEST FOR CONFIDENTIALITY

[Reference Document: FCC KDB# # 726920 D02 Confidentiality Procedures Detail v01]

NOTE: If you do not require confidentiality your exhibits are visible on the FCC website for everyone. A request for confidentiality must be indicated in item 8 of the 731 form and a letter making specific request for confidentiality must accompany the application as a separate exhibit. This letter must state exactly which portions of the application are to be held in confidence and for what specific reason. Exhibit types that are commonly held confidential are:

(1) schematic diagrams,

(2) detailed block diagrams,

(3) detailed operational descriptions,

(4) parts lists, and

(5) tune up procedures (if applicable). Internal photos and user's manual exhibits, while not typically held confidential, may be eligible for long confidentiality in certain circumstances. Additional justification must be provided in these cases:

(6) Internal Photos

(may be held confidential when i.e.

the circuit board is enclosed in epoxy or some sort of material that would destroy the circuit board if it was removed;

the device is sealed using special fasteners that cannot be opened using common hand tools or if the PCBs are completely potted;

Provide photos justifying the attestation. Provide justification as to how the device is sealed and how disassembly would destroy the product and circuit board.

(7) Users manuals

(may be held in confidence when i.e.

the manual will only be available to licensed or specially trained personnel. the manual is very technical and is not provided to the consumer because the consumer cannot service the device Submit an agreement such as a non-disclosure agreement, purchase agreement or installation agreement, between the grantee and the purchaser that is consistent with the submitted confidentiality request with regard to the internal photos, manual or any installation requirements such as located in an inaccessible area. The agreement should be on company's letter head. If applicable, the agreement should indicate how the purchaser will install the device and how the internal photo(s) or manual will not be given to the public The FCC is a federal agency and as such has duties to the public to disclose information made known to it (see 47 CFR 0). The FCC has a procedure to handle confidential items and any request will be delivered to the FCC for them to decide if it can be held in confidence (PBA procedure). A request for confidentially does not guarantee that the FCC will grant it. Please find below a sample letter for confidentiality request. Eurofins Product Service GmbH Storkower Str. 38c 15526 Reichenwalde b. Berlin Germany Tel +49-33631-888 0 Fax +49-33631-888 650 www.eurofins.de/ipt www.eurofins.com Place of Business: Reichenwalde Registration Office: Frankfurt (Oder) HRB 13937 FF VAT no: DE257676793 Managing Director: Christian Keding Bank Details:

UniCredit Bank AG IBAN: DE70 2073 0017 7000 0015 50 SWIFT BIC: HYVEDEMME17 DocuSign Envelope ID: 9DD41E20-622C-4C22-A3AC-04DE2AD677F2 Raspberry Pi Ltd Maurice Wilkes Building Cowley Road Cambridge CB4 0DS Web http://raspberrypi.com Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Permanent Confidentiality Company name: Raspberry Pi Ltd FCC ID: 2ABCB-PICOW FCC Part 15 Certification Gentlemen, In accordance with CFR 47 0.457 and CFR 47 0.459 Raspberry Pi Ltd hereby requests confidentiality of following attachments:

(1) schematic diagrams,

(2) detailed block diagrams,

(3) detailed operational descriptions,

(4) parts lists. These documents contain detailed system and equipment description and related information about the product which Raspberry Pi Ltd considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Raspberry Pi Ltd considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, James Adams Chief Operating Officer Raspberry Pi Ltd Maurice Wilkes Building Cowley Road Cambridge CB4 0DS UK DocuSign Envelope ID: 9DD41E20-622C-4C22-A3AC-04DE2AD677F2

The Maurice Wilkes Building, St Johns Innovation Park, Cowley Road, Cambridge, CB4 0DS UK Web http://raspberrypi.com Raspberry Pi Ltd Subject: FCC Single-Modular Approval Letter FCC ID: 2ABCB-PICOW To whom it may concern We, Raspberry Pi Ltd, hereby declare that the product, FCC ID: 2ABCB-PICOW, has met the single-modular approval requirements of FCC rule part 15.212(a)(1) and this is shown in the table below. Requirement The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly have buffered The module must modulation/data inputs to ensure that the device will 15 requirements with any type of input signal comply with Part The module must contain power supply regulation on the module The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Compliance:

Yes or No along with a justification Yes, see operational description. Yes, all inputs are buffered from main processor to radio chip. Inputs to the board are buffered through USB or UART. Yes, the device has a 5V 3V3 switch mode power supply that supplies the Radio circuitry. Yes, antenna is built into PCB see exhibits. The module must demonstrate compliance in a stand-alone configuration Yes, system is fully functional without any other equipment. Registered Company Number: 8207441 DocuSign Envelope ID: A7C3EF6E-58B0-4324-8376-F0DF5DAC5DA003 May 2022 | 16:10 BST The Maurice Wilkes Building, St Johns Innovation Park, Cowley Road, Cambridge, CB4 0DS UK Web http://raspberrypi.com Raspberry Pi Ltd The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee Yes, FCC lD printed on PCB, see photo exhibit. Yes, see user guide The module must comply with RF exposure requirements Yes, see RF exposure exhibit. Yours faithfully, James Adams Chief Operating Officer DocuSign Envelope ID: A7C3EF6E-58B0-4324-8376-F0DF5DAC5DA0