submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
User Manual | Users Manual | 832.79 KiB | January 14 2021 / July 14 2021 | delayed release | ||
|
Users Manual | Users Manual | 634.07 KiB | June 24 2021 / December 29 2021 | delayed release | ||
|
Internal Photos | Internal Photos | 3.23 MiB | June 24 2021 / December 29 2021 | delayed release | ||
|
Internal Photos part1 | Internal Photos | 4.73 MiB | April 27 2020 / October 25 2020 | delayed release | ||
|
Internal Photos part2 | Internal Photos | 1.80 MiB | April 27 2020 / October 25 2020 | delayed release | ||
|
Internal photo | Internal Photos | 2.76 MiB | May 07 2020 / November 04 2020 | delayed release | ||
|
External Photos | External Photos | 2.29 MiB | June 24 2021 / December 29 2021 | delayed release | ||
|
External photo | External Photos | 1.34 MiB | May 07 2020 / November 04 2020 | delayed release | ||
|
TempConfidential AX201NGW- Expho | External Photos | 879.64 KiB | July 15 2019 / January 11 2020 | delayed release | ||
|
AX201NGW- LabelLoc | ID Label/Location Info | 348.11 KiB | July 15 2019 | |||
|
AX201NGW- Labelsmpl | ID Label/Location Info | 68.97 KiB | July 15 2019 | |||
|
ID Label/Location Info | ID Label/Location Info | 388.76 KiB | June 24 2021 / July 15 2021 | |||
|
Label and label location | ID Label/Location Info | 311.48 KiB | April 07 2020 / April 08 2020 | |||
|
label and location0 RZ09-031 | ID Label/Location Info | 247.52 KiB | April 10 2020 / April 23 2020 | |||
|
label and location RZ09-031 | ID Label/Location Info | 139.74 KiB | April 10 2020 / April 23 2020 | |||
|
Authorization Letter | Cover Letter(s) | 33.84 KiB | June 24 2021 / July 15 2021 | |||
|
Class II permissive change format letter | Cover Letter(s) | 153.24 KiB | June 24 2021 / July 15 2021 | |||
|
FCC Power Inconsistency Declaration Letter | Cover Letter(s) | 22.22 KiB | June 24 2021 / July 15 2021 | |||
|
Test Report SAR | RF Exposure Info | 1.55 MiB | June 24 2021 / July 15 2021 | |||
|
Test Report SAR Appendix A | RF Exposure Info | 1.00 MiB | June 24 2021 / July 15 2021 | |||
|
Test Report SAR Appendix B | RF Exposure Info | 1.06 MiB | June 24 2021 / July 15 2021 | |||
|
Test Report SAR Appendix C | RF Exposure Info | 1.90 MiB | June 24 2021 / July 15 2021 | |||
|
Test Setup Photos SAR | Test Setup Photos | 778.31 KiB | June 24 2021 / December 29 2021 | delayed release | ||
|
confidentiality | Cover Letter(s) | 53.71 KiB | July 01 2021 / July 15 2021 | |||
SOFTWARE SECURITY REQUIREMENTS | Operational Description | June 24 2021 | confidential | ||||
|
Appendix A. SAR Plots of System Verification | RF Exposure Info | 373.33 KiB | January 15 2021 / January 18 2021 | |||
|
Appendix B. SAR Plots of SAR Measurement | RF Exposure Info | 415.20 KiB | January 15 2021 / January 18 2021 | |||
|
Appendix C. Calibration Certificate for Probe and Dipole part1 | RF Exposure Info | 4.85 MiB | January 15 2021 / January 18 2021 | |||
|
Appendix C. Calibration Certificate for Probe and Dipole part2 | RF Exposure Info | 1.59 MiB | January 15 2021 / January 18 2021 | |||
|
Power Inconsistency Declaration Letter | Cover Letter(s) | 48.88 KiB | January 14 2021 / January 18 2021 | |||
|
SAR Test report | RF Exposure Info | 1.14 MiB | January 15 2021 / January 18 2021 | |||
|
Test Setup Photos | Test Setup Photos | 213.25 KiB | January 14 2021 / July 14 2021 | delayed release | ||
|
Class II permissive change letter | Cover Letter(s) | 141.56 KiB | January 14 2021 / January 18 2021 | |||
Operational Description | Operational Description | January 14 2021 | confidential | ||||
|
Declaration of authorization | Cover Letter(s) | 93.67 KiB | September 24 2020 / October 11 2020 | |||
Operation Description for software security | Operational Description | September 24 2020 | confidential | ||||
|
SAR Test report Appendix A. SAR Plots of System Verification | RF Exposure Info | 532.54 KiB | September 24 2020 / October 11 2020 | |||
|
SAR Test report Appendix B. SAR Plots of SAR Measurement | RF Exposure Info | 447.30 KiB | September 24 2020 / October 11 2020 | |||
|
SAR Test report Appendix C. Calibration Certificate | RF Exposure Info | 5.65 MiB | September 24 2020 / October 11 2020 | |||
|
Power Inconsistency Declaration Lette | Cover Letter(s) | 46.96 KiB | September 24 2020 / October 11 2020 | |||
|
Declaration of operational usage | Cover Letter(s) | 82.39 KiB | May 07 2020 / May 08 2020 | |||
|
FCC SAR Test report | RF Exposure Info | 1.09 MiB | May 07 2020 / May 08 2020 | |||
|
FCC SAR Test report Appendix A | RF Exposure Info | 447.33 KiB | May 07 2020 / May 08 2020 | |||
|
FCC SAR Test report Appendix B | RF Exposure Info | 441.44 KiB | May 07 2020 / May 08 2020 | |||
|
FCC SAR Test report Appendix C | RF Exposure Info | 3.82 MiB | May 07 2020 / May 08 2020 | |||
Software Security Requirements for UNII devices | Operational Description | May 07 2020 | confidential | ||||
|
Appendix C. Calibration Certificate | RF Exposure Info | 2.97 MiB | April 27 2020 / April 28 2020 | |||
|
Declaration of Product--SAR | Cover Letter(s) | 42.38 KiB | April 27 2020 / April 28 2020 | |||
Software Security for U-NII Devices | Operational Description | April 27 2020 | confidential | ||||
|
180717-02.TR07 - SAR FCC, Generic SKU, HrP 2230 AX201NGW 1 | RF Exposure Info | 4.08 MiB | April 10 2020 / April 23 2020 | |||
|
180717-02.TR07 - SAR FCC, Generic SKU, HrP 2230 AX201NGW , Photographs | Test Setup Photos | 725.37 KiB | April 10 2020 / October 08 2020 | delayed release | ||
|
C2PC request letter | Cover Letter(s) | 72.65 KiB | April 07 2020 / April 08 2020 | |||
|
Confidentiality request letter | Cover Letter(s) | 130.04 KiB | April 07 2020 / April 08 2020 | |||
|
RF Test Report | Test Report | 1.07 MiB | April 09 2020 / April 08 2020 | |||
|
RF Test Setup Photos | Test Setup Photos | 800.82 KiB | April 09 2020 / April 08 2020 | |||
|
SAR Test Setup Photos | Test Setup Photos | 273.00 KiB | April 07 2020 / October 02 2020 | delayed release | ||
Operational description | Parts List/Tune Up Info | April 07 2020 | confidential | ||||
Test Report | 4.80 MiB | August 09 2019 / September 08 2019 | |||||
Test Setup Photos RF | Test Setup Photos | 794.64 KiB | August 09 2019 / February 06 2020 | delayed release | |||
|
AX201NGW- Auth Ltr Change of ID | Cover Letter(s) | 80.83 KiB | July 15 2019 | |||
|
AX201NGW- Confidentiality | Cover Letter(s) | 202.25 KiB | July 15 2019 | |||
|
AX201NGW- Declaration letter for electrically identical 20190715 | Cover Letter(s) | 108.94 KiB | July 15 2019 | |||
|
AX201NGW- Declaration of authorization | Cover Letter(s) | 86.98 KiB | July 15 2019 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-07-15 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
4 | 2021-01-18 | 2422 ~ 2462 | DTS - Digital Transmission System | |
5 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
6 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
7 | 2020-10-11 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
8 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
9 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
10 | 2020-05-08 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
11 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
12 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
13 | 2020-04-28 | 2422 ~ 2462 | DTS - Digital Transmission System | |
14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
15 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
16 | 2020-04-23 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
17 | 2020-04-22 | 2422 ~ 2462 | DTS - Digital Transmission System | |
18 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
19 | 2020-04-08 | 2422 ~ 2462 | DTS - Digital Transmission System | |
20 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
22 | 2019-09-08 | 5250 ~ 5250 | NII - Unlicensed National Information Infrastructure TX | |
23 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
25 | 2019-07-15 | JBP - Part 15 Class B Computing Device Peripheral | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 | |
26 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
27 | 5755 ~ 5795 | NII - Unlicensed National Information Infrastructure TX | ||
28 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2021-07-15
|
|||||
2021-01-18
|
||||||
2020-10-11
|
||||||
2020-05-08
|
||||||
2020-04-28
|
||||||
2020-04-23
|
||||||
2020-04-22
|
||||||
2020-04-08
|
||||||
2019-09-08
|
||||||
2019-07-15
|
||||||
Applicant's complete, legal business name |
Razer Inc.
|
|||||
FCC Registration Number (FRN) |
0022386734
|
|||||
Physical Address |
9 Pasteur, Suite 100
|
|||||
201 3rd Street, Suite 900
|
||||||
Irvine, CA
|
||||||
Irvine
|
||||||
San Francisco,
|
||||||
San Francisco,, 94103
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
c******@telefication.com
|
|||||
h******@acbcert.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
RWO
|
|||||
Equipment Product Code |
RZ090310
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
J**** T****
|
|||||
Title |
Director, Regulatory & Compliance
|
|||||
Telephone Number |
760 5********
|
|||||
Fax Number |
760 5********
|
|||||
j******@razerzone.com
|
||||||
Technical Contact | ||||||
Firm Name |
BTL Inc.
|
|||||
DEKRA Testing and Certification Co., Ltd
|
||||||
Name |
S******** L****
|
|||||
A**** L********
|
||||||
Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
|||||
No.3 Jinshagang 1st Rd
|
||||||
No.5-22, Ruishukeng, Linkou Dist.
|
||||||
Dongguan, 523792
|
||||||
New Taipei City, 24451
|
||||||
China
|
||||||
Chile
|
||||||
Taiwan
|
||||||
Telephone Number |
+8676********
|
|||||
86-76******** Extension:
|
||||||
86-76********
|
||||||
88628******** Extension:
|
||||||
88628******** Extension:
|
||||||
Fax Number |
86-76********
|
|||||
88628********
|
||||||
s******@newbtl.com
|
||||||
a******@dekra.com
|
||||||
Non Technical Contact | ||||||
Firm Name |
BTL Inc.
|
|||||
Name |
R******** L********
|
|||||
M**** W******
|
||||||
Physical Address |
No.3,Jinshagang 1st Rd,ShiXia,Dalang
|
|||||
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||||
No.3 Jinshagang 1st Rd
|
||||||
Dongguan, 523792
|
||||||
China
|
||||||
Telephone Number |
+8676********
|
|||||
86-76********
|
||||||
86-76******** Extension:
|
||||||
86-76******** Extension:
|
||||||
Fax Number |
86-76********
|
|||||
R******@newbtl.com
|
||||||
m******@newbtl.com
|
||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/29/2021 | |||||
07/14/2021 | ||||||
03/24/2021 | ||||||
11/04/2020 | ||||||
10/25/2020 | ||||||
10/08/2020 | ||||||
10/02/2020 | ||||||
10/03/2020 | ||||||
02/06/2020 | ||||||
01/11/2020 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DTS - Digital Transmission System | |||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
NII - Unlicensed National Information Infrastructure TX | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6 AX201 | |||||
Intel Wi-Fi 6 AX201 | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Purpose / Application is for | Class II Permissive Change | |||||
Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand name/Model : RAZER / RZ09-0410) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 0.44 W/kg, and 0.74 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | |||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand name/Model : RAZER / RZ09- 0410) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1.46 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand name/Model : RAZER / RZ09-0410) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.43 W/kg, and 1.46 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand name/Model : RAZER / RZ09-0369) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 0.53 W/kg, and 0.86 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand name/Model : RAZER / RZ09-0369) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1.06 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand name/Model : RAZER / RZ09-0369) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.02 W/kg, and 1.06 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand/model number : RAZER / RZ09-0327) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.15 W/kg, and 1.24 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand/model number : RAZER / RZ09-0327) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 0.84 W/kg, and 1.44 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a portable Notebook PC(Brand/model number : RAZER / RZ09-0327) with new antennas as described in this filing, (b) Output power decreasing via software modification. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1.24 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0329, a portable Notebook PC with new antennas as described in this filing, (b) Output power decreasing via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1.18 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0329, a portable Notebook PC with new antennas as described in this filing, (b) Output power decreasing via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.17 W/kg, and 1.18 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0329, a portable Notebook PC with new antennas as described in this filing, (b) Output power decreasing via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission exposure conditions are 1.17 W/kg, and 1.18W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0330, a portable Notebook PC with new antennas as described in this filing, (b) Output power decreasing via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 0.62 W/kg, and 1. 15 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0330, a portable Notebook PC with new antennas as described in this filing, (b) Output power decreasing via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1. 15 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0330, a portable Notebook PC with new antennas as described in this filing, (b) Output power decreasing via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission exposure conditions are 1.12 W/kg, and 1. 15 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0310, a portable Notebook PC with new antennas as described in this filing, (b) Reduce output power via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.41 W/kg, and 1. 45 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0310, a portable Notebook PC with new antennas as described in this filing, (b) Reduce output power via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.30 W/kg, and 1. 34 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0310, a portable Notebook PC with new antennas as described in this filing, (b) Reduce output power via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1. 45 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change incorporates this Module into a Razer, RZ09-0328, a portable Notebook PC with new antennas as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.03 W/kg, and 1.06 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change (a) incorporates this Module into a Razer, RZ09-0328, a portable Notebook PC with new antennas as described in this filing, (b) Reduce output power via software. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.17 W/kg, and 1.20 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This change incorporates this Module into a Razer, RZ09-0328, a portable Notebook PC with new antennas as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1.20 W/kg, respectively. Modular Approval filing. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This Class II Change incorporates this Module into a Razer, RZ09-031/ RZ09-0310, Laptop Computer and the antenna changes with higher gain as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.41 W/kg, and 1. 45 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This Class II Change incorporates this Module into a Razer, RZ09-031/ RZ09-0310, Laptop Computer as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are 1.30 W/kg, and 1. 45 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Class II Change: This Class II Change incorporates this Module into a Razer, RZ09-031/ RZ09-0310, Laptop Computer as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body, and simultaneous transmission use conditions are <0.10 W/kg, and 1. 45 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
BTL Inc.
|
|||||
Intel Corporation - Oregon Certification EMC Lab
|
||||||
Name |
S**** H******
|
|||||
E******** G********
|
||||||
Telephone Number |
+86-7******** Extension:
|
|||||
50369********
|
||||||
Fax Number |
50369********
|
|||||
S******@newbtl.com
|
||||||
e******@intel.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
3 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
3 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
3 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
3 | 11 | 15E | CC MO | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
3 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
3 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
3 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
6 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
6 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
6 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
6 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
6 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
6 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
6 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
6 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
6 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
6 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
7 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
7 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
7 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
7 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
12 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
12 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
12 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
12 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
12 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
12 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
12 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
12 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
12 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
13 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
13 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
15 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
15 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
15 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
15 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
15 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
15 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
15 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
15 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
15 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
15 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
15 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
16 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
16 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
16 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
16 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
16 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
16 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
16 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
16 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
16 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
16 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
19 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
19 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15E | CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15E | CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
20 | 4 | 15E | CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
20 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
20 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
20 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
20 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
20 | 9 | 15E | MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
20 | 11 | 15E | MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
20 | 12 | 15E | CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
20 | 13 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
20 | 14 | 15E | CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
22 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
22 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
22 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
22 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
22 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
22 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
22 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
22 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
22 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
22 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
22 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
22 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
22 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
27 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
27 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
27 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
27 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
27 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
27 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
27 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.137 | |||||||||||||||||||||||||||||||||||
27 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
27 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
27 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
27 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
27 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
27 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC