FCC ID: RWO-RZ090368 Intel Wi-Fi 6E AX210

by: Razer Inc. latest update: 2022-01-06 model: RZ090368

Twenty Five grants have been issued under this FCC ID from 12/30/2020 to 01/06/2022 (this is one of sixty-nine releases in 2022 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, troubleshooting guides, drivers, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various AX210NGW-User manual Users Manual pdf 232.67 KiB July 12 2021 / July 19 2021
various User manual Users Manual pdf 812.61 KiB June 02 2021 / November 30 2021 delayed release
various Users Manual Users Manual pdf 467.02 KiB January 03 2022 / July 03 2022 delayed release
various Internal Photos Internal Photos pdf 1.86 MiB January 03 2022 / July 03 2022 delayed release
various Internal Photos-1 Internal Photos pdf 4.71 MiB October 20 2021 / April 19 2022 delayed release
various Internal Photos-2 Internal Photos pdf 2.22 MiB October 20 2021 / April 19 2022 delayed release
various AX210NGW- Expho External Photos pdf 544.87 KiB July 12 2021 / July 19 2021
various External Photos External Photos pdf 1.22 MiB January 03 2022 / July 03 2022 delayed release
various AX210NGW- LabelLoc ID Label/Location Info pdf 253.72 KiB July 12 2021 / July 19 2021
various AX210NGW- Labelsmpl-20201230-2 ID Label/Location Info pdf 306.95 KiB July 12 2021 / July 19 2021
various ID Label/Location Info ID Label/Location Info pdf 644.64 KiB January 03 2022 / January 06 2022
various Annex C Plots of System Performance Check RF Exposure Info pdf 347.78 KiB January 03 2022 / January 06 2022
various Annex C Plots of System Performance Check PD RF Exposure Info pdf 173.92 KiB January 03 2022 / January 06 2022
various Annex D Plots of Maximum SAR Test Results RF Exposure Info pdf 144.09 KiB January 03 2022 / January 06 2022
various Annex D Plots of Power Density Measurement PD RF Exposure Info pdf 184.48 KiB January 03 2022 / January 06 2022
various Annex E1 DASY Calibration Certificate EX3DV4-SN7608 RF Exposure Info pdf 4.27 MiB January 03 2022 / January 06 2022
various Annex E1-1 DASY Calibration Certificate PD RF Exposure Info pdf 4.20 MiB January 03 2022 / January 06 2022
various Annex E1-2 DASY Calibration Certificate PD RF Exposure Info pdf 3.31 MiB January 03 2022 / January 06 2022
various Annex E1-3 DASY Calibration Certificate PD RF Exposure Info pdf 3.37 MiB January 03 2022 / January 06 2022
various Annex E2 DASY Calibration Certificate PD RF Exposure Info pdf 3.12 MiB January 03 2022 / January 06 2022
various Annex E2 DASY Calibration Certificate EX3DV4-SN7608 RF Exposure Info pdf 5.63 MiB January 03 2022 / January 06 2022
various Annex E3 DASY Calibration Certificate PD RF Exposure Info pdf 1.54 MiB January 03 2022 / January 06 2022
various Annex E3 DASY Calibration Certificate DAE-SN1643 RF Exposure Info pdf 1.59 MiB January 03 2022 / January 06 2022
various Annex E4 DASY Calibration Certificate D6500 RF Exposure Info pdf 4.25 MiB January 03 2022 / January 06 2022
various Annex F Maximum Target Conducted Power RF Exposure Info pdf 180.26 KiB January 03 2022 / January 06 2022
various Annex F Maximum Target Conducted Power PD RF Exposure Info pdf 180.61 KiB January 03 2022 / January 06 2022
various Authorization Letter Cover Letter(s) pdf 26.33 KiB January 03 2022 / January 06 2022
various Class II permissive change format letter Cover Letter(s) pdf 71.45 KiB January 03 2022 / January 06 2022
various Confidentiality Cover Letter(s) pdf 157.14 KiB January 03 2022 / January 06 2022
various Declaration of Product Cover Letter(s) pdf 25.70 KiB January 03 2022 / January 06 2022
various FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 27.33 KiB January 03 2022 / January 06 2022
various SZ21070313S01 Razer RZ09-0406 FCC RF Exposure PD RF Exposure Info pdf 2.00 MiB January 03 2022 / January 06 2022
various Test Report-1 Test Report pdf 3.92 MiB January 03 2022 / January 06 2022
various Test Report-2 Test Report pdf 2.87 MiB January 03 2022 / January 06 2022
various Test Report SAR RF Exposure Info pdf 1.58 MiB January 03 2022 / January 06 2022
various Test Setup Photos PD SAR Test Setup Photos pdf 203.39 KiB January 03 2022 / July 03 2022 delayed release
various Test Setup Photos RF Test Setup Photos pdf 760.12 KiB January 03 2022 / July 03 2022 delayed release
various Test Setup Photos SAR Test Setup Photos pdf 144.42 KiB January 03 2022 / July 03 2022 delayed release
various PD Test setup photos SAR Test Setup Photos pdf 205.93 KiB December 03 2021 / June 02 2022 delayed release
various SAR Test report RF Exposure Info pdf 1.50 MiB December 03 2021 / December 06 2021
various SAR Test report PD RF Exposure Info pdf 1.97 MiB December 03 2021 / December 06 2021
various Test Report RF Test Report pdf 2.53 MiB December 03 2021 / December 06 2021
various Test Report 6XD Part 1 Test Report pdf 5.43 MiB December 02 2021 / December 03 2021
various Test Report 6XD Part 2 Test Report pdf 2.08 MiB December 02 2021 / December 03 2021
various Test Report BLE Test Report pdf 1.55 MiB December 02 2021 / December 03 2021
various Test Report DSS Test Report pdf 1.55 MiB December 02 2021 / December 03 2021
various Test Report NII Part 1 Test Report pdf 5.43 MiB December 02 2021 / December 03 2021
various Test Report NII Part 2 Test Report pdf 2.39 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex C RF Exposure Info pdf 350.31 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex C PD RF Exposure Info pdf 174.31 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex D RF Exposure Info pdf 317.19 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex D PD RF Exposure Info pdf 149.15 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex E1 RF Exposure Info pdf 4.27 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex E1-1 PD RF Exposure Info pdf 4.20 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex E5 RF Exposure Info pdf 3.05 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex F RF Exposure Info pdf 180.96 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex F PD RF Exposure Info pdf 180.95 KiB December 02 2021 / December 03 2021
various Test Report SAR PD RF Exposure Info pdf 1.97 MiB December 02 2021 / December 03 2021
various Test Report WLAN 2.4G Test Report pdf 2.72 MiB December 02 2021 / December 03 2021
various Test Setup Photos SAR PD Test Setup Photos pdf 205.94 KiB December 02 2021 / June 01 2022 delayed release
various FCC Request for non-disclosure revised Cover Letter(s) pdf 100.50 KiB November 08 2021 / December 02 2021
various RF Exposure Info pdf November 05 2021 / December 02 2021
various RF Exposure PD revised RF Exposure Info pdf 1.97 MiB December 01 2021 / December 02 2021
various RF Test setup photo Test Setup Photos pdf 810.26 KiB December 01 2021 / May 05 2022 delayed release
various SAR Test Setup Photos Test Setup Photos pdf 144.37 KiB November 05 2021 / May 05 2022 delayed release
various SAR Test Setup Photos PD Test Setup Photos pdf 163.75 KiB November 05 2021 / May 05 2022 delayed release
various SAR Test report Annex C RF Exposure Info pdf 114.59 KiB November 05 2021 / December 02 2021
various SAR Test report Annex C PD RF Exposure Info pdf 133.25 KiB November 05 2021 / December 02 2021
various SAR Test report Annex D RF Exposure Info pdf 162.01 KiB November 05 2021 / December 02 2021
various SAR Test report Annex D PD RF Exposure Info pdf 221.40 KiB November 05 2021 / December 02 2021
various SAR Test report Annex E1 RF Exposure Info pdf 4.27 MiB November 05 2021 / December 02 2021
various SAR Test report Annex E1-1 PD RF Exposure Info pdf 4.16 MiB November 05 2021 / December 02 2021
various RF Exposure Info pdf November 05 2021 / December 02 2021
various RF Exposure Info pdf November 05 2021 / December 02 2021
various SAR Test report Annex F PD revised RF Exposure Info pdf 180.12 KiB December 01 2021 / December 02 2021
various SAR Test report Annex F revised RF Exposure Info pdf 180.49 KiB December 01 2021 / December 02 2021
various SAR Test report revised RF Exposure Info pdf 1.50 MiB December 01 2021 / December 02 2021
various Test report WIFI 6E Test Report pdf 2.48 MiB November 05 2021 / December 02 2021
various SAR PD Test report Annex C Plots of System Performance Check RF Exposure Info pdf 132.57 KiB October 20 2021 / October 22 2021
various SAR PD Test report Annex E1-1 DASY Calibration Certificate RF Exposure Info pdf 4.20 MiB October 20 2021 / October 22 2021
various SAR Test report Annex C Plots of System Performance Check RF Exposure Info pdf 136.65 KiB October 20 2021 / October 22 2021
various SAR Test report Annex D Plots of Maximum SAR Test Results RF Exposure Info pdf 208.63 KiB October 20 2021 / October 22 2021
various SAR Test report Annex D Plots of Power Density Measurement PD RF Exposure Info pdf 146.04 KiB October 20 2021 / October 22 2021
various SAR Test report Annex E1 DASY Calibration Certificate EX3DV4-SN7608 RF Exposure Info pdf 4.27 MiB October 20 2021 / October 22 2021
various RF Exposure Info pdf 359.31 KiB October 20 2021 / October 22 2021
various RF Exposure Info pdf 319.81 KiB October 20 2021 / October 22 2021
various SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Operational Description pdf October 20 2021 confidential
various Test Report Test Report pdf 2.48 MiB October 20 2021 / October 22 2021
various Test setup photos PD Test Setup Photos pdf 163.75 KiB October 20 2021 / April 19 2022 delayed release
various Wifi 6E Declaration of Product Cover Letter(s) pdf 21.80 KiB October 20 2021 / October 22 2021
various AX210NGW- Confidentiality Request 20210714 Cover Letter(s) pdf 160.59 KiB July 15 2021 / July 19 2021
various AX210NGW- Declaration letter for electrically identical 20210713 Cover Letter(s) pdf 271.57 KiB July 15 2021 / July 19 2021
various AX210NGW- Declaration of authorization Cover Letter(s) pdf 84.01 KiB July 12 2021 / July 19 2021
various FCC Auth Ltr Change of ID Razer AX210NGW 6XD Cover Letter(s) pdf 159.88 KiB July 12 2021 / July 19 2021
various C2PC request letter Cover Letter(s) pdf 55.51 KiB July 15 2021
various FCC Request for non-disclosure Cover Letter(s) pdf 305.26 KiB July 15 2021
various Test Report SAR Appendix A RF Exposure Info pdf 331.91 KiB July 15 2021
various Test Report SAR Appendix B RF Exposure Info pdf 395.20 KiB July 15 2021
various Test Report SAR Appendix C RF Exposure Info pdf 2.23 MiB July 15 2021
various Wi-Fi Channel 12 and 13 Declaration Letter Cover Letter(s) pdf 27.23 KiB July 15 2021
various Test setup photo SAR Test Setup Photos pdf 201.39 KiB June 02 2021 / November 30 2021 delayed release
various AX210NGW-User manual Users Manual pdf 232.67 KiB July 12 2021 / July 19 2021
various User manual Users Manual pdf 812.61 KiB June 02 2021 / November 30 2021 delayed release
various Users Manual Users Manual pdf 467.02 KiB January 03 2022 / July 03 2022 delayed release
various Internal Photos Internal Photos pdf 1.86 MiB January 03 2022 / July 03 2022 delayed release
various Internal Photos-1 Internal Photos pdf 4.71 MiB October 20 2021 / April 19 2022 delayed release
various Internal Photos-2 Internal Photos pdf 2.22 MiB October 20 2021 / April 19 2022 delayed release
various AX210NGW- Expho External Photos pdf 544.87 KiB July 12 2021 / July 19 2021
various External Photos External Photos pdf 1.22 MiB January 03 2022 / July 03 2022 delayed release
various AX210NGW- LabelLoc ID Label/Location Info pdf 253.72 KiB July 12 2021 / July 19 2021
various AX210NGW- Labelsmpl-20201230-2 ID Label/Location Info pdf 306.95 KiB July 12 2021 / July 19 2021
various ID Label/Location Info ID Label/Location Info pdf 644.64 KiB January 03 2022 / January 06 2022
various Annex C Plots of System Performance Check RF Exposure Info pdf 347.78 KiB January 03 2022 / January 06 2022
various Annex C Plots of System Performance Check PD RF Exposure Info pdf 173.92 KiB January 03 2022 / January 06 2022
various Annex D Plots of Maximum SAR Test Results RF Exposure Info pdf 144.09 KiB January 03 2022 / January 06 2022
various Annex D Plots of Power Density Measurement PD RF Exposure Info pdf 184.48 KiB January 03 2022 / January 06 2022
various Annex E1 DASY Calibration Certificate EX3DV4-SN7608 RF Exposure Info pdf 4.27 MiB January 03 2022 / January 06 2022
various Annex E1-1 DASY Calibration Certificate PD RF Exposure Info pdf 4.20 MiB January 03 2022 / January 06 2022
various Annex E1-2 DASY Calibration Certificate PD RF Exposure Info pdf 3.31 MiB January 03 2022 / January 06 2022
various Annex E1-3 DASY Calibration Certificate PD RF Exposure Info pdf 3.37 MiB January 03 2022 / January 06 2022
various Annex E2 DASY Calibration Certificate PD RF Exposure Info pdf 3.12 MiB January 03 2022 / January 06 2022
various Annex E2 DASY Calibration Certificate EX3DV4-SN7608 RF Exposure Info pdf 5.63 MiB January 03 2022 / January 06 2022
various Annex E3 DASY Calibration Certificate PD RF Exposure Info pdf 1.54 MiB January 03 2022 / January 06 2022
various Annex E3 DASY Calibration Certificate DAE-SN1643 RF Exposure Info pdf 1.59 MiB January 03 2022 / January 06 2022
various Annex E4 DASY Calibration Certificate D6500 RF Exposure Info pdf 4.25 MiB January 03 2022 / January 06 2022
various Annex F Maximum Target Conducted Power RF Exposure Info pdf 180.26 KiB January 03 2022 / January 06 2022
various Annex F Maximum Target Conducted Power PD RF Exposure Info pdf 180.61 KiB January 03 2022 / January 06 2022
various Authorization Letter Cover Letter(s) pdf 26.33 KiB January 03 2022 / January 06 2022
various Class II permissive change format letter Cover Letter(s) pdf 71.45 KiB January 03 2022 / January 06 2022
various Confidentiality Cover Letter(s) pdf 157.14 KiB January 03 2022 / January 06 2022
various Declaration of Product Cover Letter(s) pdf 25.70 KiB January 03 2022 / January 06 2022
various FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 27.33 KiB January 03 2022 / January 06 2022
various SZ21070313S01 Razer RZ09-0406 FCC RF Exposure PD RF Exposure Info pdf 2.00 MiB January 03 2022 / January 06 2022
various Test Report-1 Test Report pdf 3.92 MiB January 03 2022 / January 06 2022
various Test Report-2 Test Report pdf 2.87 MiB January 03 2022 / January 06 2022
various Test Report SAR RF Exposure Info pdf 1.58 MiB January 03 2022 / January 06 2022
various Test Setup Photos PD SAR Test Setup Photos pdf 203.39 KiB January 03 2022 / July 03 2022 delayed release
various Test Setup Photos RF Test Setup Photos pdf 760.12 KiB January 03 2022 / July 03 2022 delayed release
various Test Setup Photos SAR Test Setup Photos pdf 144.42 KiB January 03 2022 / July 03 2022 delayed release
various PD Test setup photos SAR Test Setup Photos pdf 205.93 KiB December 03 2021 / June 02 2022 delayed release
various SAR Test report RF Exposure Info pdf 1.50 MiB December 03 2021 / December 06 2021
various SAR Test report PD RF Exposure Info pdf 1.97 MiB December 03 2021 / December 06 2021
various Test Report RF Test Report pdf 2.53 MiB December 03 2021 / December 06 2021
various Test Report 6XD Part 1 Test Report pdf 5.43 MiB December 02 2021 / December 03 2021
various Test Report 6XD Part 2 Test Report pdf 2.08 MiB December 02 2021 / December 03 2021
various Test Report BLE Test Report pdf 1.55 MiB December 02 2021 / December 03 2021
various Test Report DSS Test Report pdf 1.55 MiB December 02 2021 / December 03 2021
various Test Report NII Part 1 Test Report pdf 5.43 MiB December 02 2021 / December 03 2021
various Test Report NII Part 2 Test Report pdf 2.39 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex C RF Exposure Info pdf 350.31 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex C PD RF Exposure Info pdf 174.31 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex D RF Exposure Info pdf 317.19 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex D PD RF Exposure Info pdf 149.15 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex E1 RF Exposure Info pdf 4.27 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex E1-1 PD RF Exposure Info pdf 4.20 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex E5 RF Exposure Info pdf 3.05 MiB December 02 2021 / December 03 2021
various Test Report SAR Annex F RF Exposure Info pdf 180.96 KiB December 02 2021 / December 03 2021
various Test Report SAR Annex F PD RF Exposure Info pdf 180.95 KiB December 02 2021 / December 03 2021
various Test Report SAR PD RF Exposure Info pdf 1.97 MiB December 02 2021 / December 03 2021
various Test Report WLAN 2.4G Test Report pdf 2.72 MiB December 02 2021 / December 03 2021
various Test Setup Photos SAR PD Test Setup Photos pdf 205.94 KiB December 02 2021 / June 01 2022 delayed release
various FCC Request for non-disclosure revised Cover Letter(s) pdf 100.50 KiB November 08 2021 / December 02 2021
various RF Exposure PD revised RF Exposure Info pdf 1.97 MiB December 01 2021 / December 02 2021
various RF Test setup photo Test Setup Photos pdf 810.26 KiB December 01 2021 / May 05 2022 delayed release
various SAR Test Setup Photos Test Setup Photos pdf 144.37 KiB November 05 2021 / May 05 2022 delayed release
various SAR Test Setup Photos PD Test Setup Photos pdf 163.75 KiB November 05 2021 / May 05 2022 delayed release
various SAR Test report Annex C RF Exposure Info pdf 114.59 KiB November 05 2021 / December 02 2021
various SAR Test report Annex C PD RF Exposure Info pdf 133.25 KiB November 05 2021 / December 02 2021
various SAR Test report Annex D RF Exposure Info pdf 162.01 KiB November 05 2021 / December 02 2021
various SAR Test report Annex D PD RF Exposure Info pdf 221.40 KiB November 05 2021 / December 02 2021
various SAR Test report Annex E1 RF Exposure Info pdf 4.27 MiB November 05 2021 / December 02 2021
various SAR Test report Annex E1-1 PD RF Exposure Info pdf 4.16 MiB November 05 2021 / December 02 2021
various SAR Test report Annex F PD revised RF Exposure Info pdf 180.12 KiB December 01 2021 / December 02 2021
various SAR Test report Annex F revised RF Exposure Info pdf 180.49 KiB December 01 2021 / December 02 2021
various SAR Test report revised RF Exposure Info pdf 1.50 MiB December 01 2021 / December 02 2021
various Test report WIFI 6E Test Report pdf 2.48 MiB November 05 2021 / December 02 2021
various SAR PD Test report Annex C Plots of System Performance Check RF Exposure Info pdf 132.57 KiB October 20 2021 / October 22 2021
various SAR PD Test report Annex E1-1 DASY Calibration Certificate RF Exposure Info pdf 4.20 MiB October 20 2021 / October 22 2021
various SAR Test report Annex C Plots of System Performance Check RF Exposure Info pdf 136.65 KiB October 20 2021 / October 22 2021
various SAR Test report Annex D Plots of Maximum SAR Test Results RF Exposure Info pdf 208.63 KiB October 20 2021 / October 22 2021
various SAR Test report Annex D Plots of Power Density Measurement PD RF Exposure Info pdf 146.04 KiB October 20 2021 / October 22 2021
various SAR Test report Annex E1 DASY Calibration Certificate EX3DV4-SN7608 RF Exposure Info pdf 4.27 MiB October 20 2021 / October 22 2021
various Test Report Test Report pdf 2.48 MiB October 20 2021 / October 22 2021
various Test setup photos PD Test Setup Photos pdf 163.75 KiB October 20 2021 / April 19 2022 delayed release
various Wifi 6E Declaration of Product Cover Letter(s) pdf 21.80 KiB October 20 2021 / October 22 2021
various AX210NGW- Confidentiality Request 20210714 Cover Letter(s) pdf 160.59 KiB July 15 2021 / July 19 2021
various AX210NGW- Declaration letter for electrically identical 20210713 Cover Letter(s) pdf 271.57 KiB July 15 2021 / July 19 2021
various AX210NGW- Declaration of authorization Cover Letter(s) pdf 84.01 KiB July 12 2021 / July 19 2021
various FCC Auth Ltr Change of ID Razer AX210NGW 6XD Cover Letter(s) pdf 159.88 KiB July 12 2021 / July 19 2021
various C2PC request letter Cover Letter(s) pdf 55.51 KiB July 15 2021
various FCC Request for non-disclosure Cover Letter(s) pdf 305.26 KiB July 15 2021
various Test Report SAR Appendix A RF Exposure Info pdf 331.91 KiB July 15 2021
various Test Report SAR Appendix B RF Exposure Info pdf 395.20 KiB July 15 2021
various Test Report SAR Appendix C RF Exposure Info pdf 2.23 MiB July 15 2021
various Wi-Fi Channel 12 and 13 Declaration Letter Cover Letter(s) pdf 27.23 KiB July 15 2021
various Test setup photo SAR Test Setup Photos pdf 201.39 KiB June 02 2021 / November 30 2021 delayed release

frequency equipment class purpose
1 2022-01-06 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
2 2021-12-06 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
3 2021-12-03 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II permissive change or modification of presently authorized equipment
4 2021-12-02 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
5 2021-10-22 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
6 2021-07-19 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Change in Identification
7 2021-07-15 2422 ~ 2452 DTS - Digital Transmission System Class II Permissive Change
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2021-06-15 2422 ~ 2452 DTS - Digital Transmission System
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
13 2021-06-03 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2422 ~ 2452 DTS - Digital Transmission System
16 2021-01-29 2422 ~ 2452 DTS - Digital Transmission System
17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
19 2021-01-13 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
20 2422 ~ 2452 DTS - Digital Transmission System
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2020-12-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
23 2422 ~ 2452 DTS - Digital Transmission System
24 JBP - Part 15 Class B Computing Device Peripheral
25 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2022-01-06
various 2021-12-06
various 2021-12-03
various 2021-12-02
various 2021-10-22
various 2021-07-19
various 2021-07-15
various 2021-06-15
various 2021-06-03
various 2021-01-29
various 2021-01-13
various 2020-12-30
various Applicant's complete, legal business name Razer Inc.
various FCC Registration Number (FRN) 0022386734
various Physical Address 9 Pasteur, Suite 100
various Irvine, CA
various Irvine, California 92618
various Irvine
various United States
app s TCB Information
various TCB Application Email Address c******@telefication.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code RWO
various Equipment Product Code RZ090368
app s Person at the applicant's address to receive grant or for contact
various Name J******** T******
various Title Director, Regulatory & Compliance
various Telephone Number 760 5********
various Fax Number 760 5********
various E-mail j******@razerzone.com
app s Technical Contact
various Firm Name BTL Inc.
various DEKRA Testing and Certification Co., Ltd
various Name S******** L****
various F**** Y******
various T**** Y****
various T****** H****
various Physical Address No.3 Jinshagang 1st Rd, Shixia
various No.3 Jinshagang 1st Rd, Shixia, Dalang
various No.5-22, Ruishukeng, Linkou Dist.
various New Taipei City
various New Taipei City, 24451
various China
various Taiwan
various Telephone Number +8676******** Extension:
various +8676********
various 86-76********
various 886-2********
various 86-76******** Extension:
various +8862******** Extension:
various 88628******** Extension:
various Fax Number 86-76********
various 6-769********
various 886-2********
various E-mail s******@newbtl.com
various f******@dekra.com
various t******@dekra.com
app s Non Technical Contact
various Firm Name BTL Inc.
various Name R**** L********
various Physical Address No.3 Jinshagang 1st Rd, Shixia
various No.3,Jinshagang 1st Rd,ShiXia,Dalang
various No.3 Jinshagang 1st Rd, Shixia, Dalang
various China
various Telephone Number +8676******** Extension:
various +8676********
various 86-76********
various 86-76******** Extension:
various Fax Number 86-76********
various 6-769********
various E-mail R******@newbtl.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)07/03/2022
various06/02/2022
various06/01/2022
various05/05/2022
various04/19/2022
various01/12/2022
various11/30/2021
various07/28/2021
various07/05/2021
various06/29/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment Class6XD - 15E 6 GHz Low Power Indoor Client
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6E AX210
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsC2PC: Updating Tx power value for SAR testing. Power Density and SAR testing was performed to demonstrate RF exposure compliance for a Laptop computer (Brand/Model number: RAZER model: RZ09-0406). SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.51 W/kg and 0.87 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousClass II permissive change: This change establishes portable category SAR conditions for a Laptop computer (Brand/Model number: RAZAR model: RZ09-0370). The highest reported SAR for body and simultaneous transmission exposure conditions are 0.91 W/kg and 1.41 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousClass II permissive change: This change establishes portable category SAR conditions for a Laptop computer (Brand/Model number: RAZAR model: RZ09-0368). The highest reported SAR for body and simultaneous transmission exposure conditions are 0.442 W/kg and 0.755 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousClass II permissive change: This change establishes portable category SAR conditions for a Laptop computer (Brand/Model number: RAZAR model: RZ09-0409). The highest reported SAR for body and simultaneous transmission exposure conditions are 0.521 W/kg and 1.057 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousClass II permissive change: This change establishes portable category SAR conditions for a Laptop computer (Brand/Model number: RAZAR model: RZ09-0367). The highest reported SAR for body and simultaneous transmission exposure conditions are 0.43 W/kg and 0.82 W/kg, respectively. Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for thistransmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provideinstallation and operating instructions for complying with FCC multi-transmitter productprocedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be providedwith transmitter operating conditions for satisfying RF exposure compliance. Power Densityand SAR testing was performed to demonstrate RF exposure compliance. The highestreported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in thisfiling. Device operation is intended for indoor use only. This device supports 20, 40, 80 and160 MHz BW modes.
variousClass II permissive change: This change is to incorporate an a) certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0406) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.88 W/kg and 0.87 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0406) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 1.21 W/kg, respectively.  Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number:Brand/Model number: RAZER/ RZ09-0406) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.15 W/kg and 1.21 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an a) certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0370/RZ09-0391) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.86 W/kg and 1.47 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0370/RZ09-0391) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 1.04 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number: Brand/Model number: RAZER/ RZ09-0370/RZ09-0391) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.20 W/kg and 1.47 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number:Brand/Model number: RAZER/ RZ09-0409) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.162 W/kg and 0.997 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0409) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 0.844 W/kg, respectively.  Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an a) certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0409) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.557 W/kg and 0.886 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an a) certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0367) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.31 W/kg and 0.55 W/kg, respectively. b) the frequency range is decreased via the software Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0367) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 0.89 W/kg, respectively. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousClass II permissive change: This change is to incorporate an certified module into the portable platform of laptop (Brand/Model number: RAZER/ RZ09-0367) with identical antenna of lesser gain as decribed in the filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.09 W/kg and 1.29 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousC2PC: This change is to incorporate an approved module into portable platform (Notebook PC , Brand/Model number: RAZER/ RZ09-0368) and to add 2 new antennas. The highest reported Body and Simultaneous SAR values are 1.168 W/kg and 1.531 W/kg respectively.
variousC2PC: This change is to incorporate an approved module into portable platform (Notebook PC , Brand/Model number: RAZER/ RZ09-0368) and to add 2 new antennas. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 1.53 W/kg respectively.
variousC2PC: This change is to incorporate an approved module into portable platform (Notebook PC , Brand/Model number: RAZER/ RZ09-0368) and to add 2 new antennas. The highest reported Simultaneous SAR values is 1.53 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body andSimultaneous SAR values are 0.02W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name BTL Inc.
various Intel Corporation S.A.S.
various Intel Corporation - Oregon CPRS Labs
various Name S****** H********
various N**** A********
various F****** B****
various Telephone Number +86-7******** Extension:
various 00334********
various 50361********
various Fax Number 00334********
various 50369********
various E-mail S******@newbtl.com
various n******@intel.com
various f******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5955 7115 0.003
1 2 15E CC MO 5965 7085 0.007
1 3 15E CC MO 5985 7025 0.013
1 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5955 7115 0.003
2 2 15E CC MO 5965 7085 0.007
2 3 15E CC MO 5985 7025 0.013
2 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5955 7115 0.003
3 2 15E CC MO 5965 7085 0.007
3 3 15E CC MO 5985 7025 0.013
3 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5955 7115 0.003
4 2 15E CC MO 5965 7085 0.007
4 3 15E CC MO 5985 7025 0.013
4 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC EP MO 5955 7115 0.012
5 2 15E CC EP MO 5965 7085 0.024
5 3 15E CC EP MO 5985 7025 0.049
5 4 15E CC EP MO 6025 6985 0.094
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC EP MO 5955 7115 0.012
6 2 15E CC EP MO 5965 7085 0.024
6 3 15E CC EP MO 5985 7025 0.049
6 4 15E CC EP MO 6025 6985 0.094
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.01
7 2 15C CC MO 2412 2472 0.792
7 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.166
9 2 15E 38 CC MO 5190 5230 0.199
9 3 15E 38 CC MO 5210 5210 0.089
9 4 15E 38 CC MO 5250 5250 0.061
9 5 15E 38 CC MO ND 5260 5320 0.165
9 6 15E 38 CC MO ND 5270 5310 0.153
9 7 15E 38 CC MO ND 5290 5290 0.084
9 8 15E 38 CC MO ND 5500 5700 0.245
9 9 15E 38 CC MO ND 5710 5710 0.249
9 1 15E 38 CC MO ND 5720 5720 0.134
9 11 15E 38 CC MO ND 5530 5690 0.228
9 12 15E 38 CC MO 5745 5825 0.262
9 13 15E 38 CC MO 5755 5795 0.27
9 14 15E 38 CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.01
10 2 15C CC MO 2412 2472 0.792
10 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E 38 CC MO 5180 5240 0.166
12 2 15E 38 CC MO 5190 5230 0.199
12 3 15E 38 CC MO 5210 5210 0.089
12 4 15E 38 CC MO 5250 5250 0.061
12 5 15E 38 CC MO ND 5260 5320 0.165
12 6 15E 38 CC MO ND 5270 5310 0.153
12 7 15E 38 CC MO ND 5290 5290 0.084
12 8 15E 38 CC MO ND 5500 5700 0.256
12 9 15E 38 CC MO ND 5710 5710 0.249
12 1 15E 38 CC MO ND 5720 5720 0.134
12 11 15E 38 CC MO ND 5530 5690 0.228
12 12 15E 38 CC MO 5745 5825 0.262
12 13 15E 38 CC MO 5755 5795 0.27
12 14 15E 38 CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC MO 5180 5240 0.166
13 2 15E 38 CC MO 5190 5230 0.199
13 3 15E 38 CC MO 5210 5210 0.089
13 4 15E 38 CC MO 5250 5250 0.061
13 5 15E 38 CC MO ND 5260 5320 0.165
13 6 15E 38 CC MO ND 5270 5310 0.153
13 7 15E 38 CC MO ND 5290 5290 0.084
13 8 15E 38 CC MO ND 5500 5700 0.245
13 9 15E 38 CC MO ND 5710 5710 0.249
13 1 15E 38 CC MO ND 5720 5720 0.134
13 11 15E 38 CC MO ND 5530 5690 0.228
13 12 15E 38 CC MO 5745 5825 0.262
13 13 15E 38 CC MO 5755 5795 0.27
13 14 15E 38 CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.01
15 2 15C CC MO 2412 2472 0.792
15 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.01
16 2 15C CC MO 2412 2472 0.792
16 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E 38 CC MO 5180 5240 0.166
18 2 15E 38 CC MO 5190 5230 0.199
18 3 15E 38 CC MO 5210 5210 0.089
18 4 15E 38 CC MO 5250 5250 0.061
18 5 15E 38 CC MO ND 5260 5320 0.165
18 6 15E 38 CC MO ND 5270 5310 0.153
18 7 15E 38 CC MO ND 5290 5290 0.084
18 8 15E 38 CC MO ND 5500 5700 0.245
18 9 15E 38 CC MO ND 5710 5710 0.249
18 1 15E 38 CC MO ND 5720 5720 0.134
18 11 15E 38 CC MO ND 5530 5690 0.228
18 12 15E 38 CC MO 5745 5825 0.262
18 13 15E 38 CC MO 5755 5795 0.27
18 14 15E 38 CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.166
19 2 15E 38 CC MO 5190 5230 0.199
19 3 15E 38 CC MO 5210 5210 0.089
19 4 15E 38 CC MO 5250 5250 0.061
19 5 15E 38 CC MO ND 5260 5320 0.165
19 6 15E 38 CC MO ND 5270 5310 0.153
19 7 15E 38 CC MO ND 5290 5290 0.084
19 8 15E 38 CC MO ND 5500 5700 0.245
19 9 15E 38 CC MO ND 5710 5710 0.249
19 1 15E 38 CC MO ND 5720 5720 0.134
19 11 15E 38 CC MO ND 5530 5690 0.228
19 12 15E 38 CC MO 5745 5825 0.262
19 13 15E 38 CC MO 5755 5795 0.27
19 14 15E 38 CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.01
20 2 15C CC MO 2412 2472 0.792
20 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.01
23 2 15C CC MO 2412 2472 0.792
23 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E 38 CC MO 5180 5240 0.166
25 2 15E 38 CC MO 5190 5230 0.199
25 3 15E 38 CC MO 5210 5210 0.089
25 4 15E 38 CC MO 5250 5250 0.061
25 5 15E 38 CC MO ND 5260 5320 0.165
25 6 15E 38 CC MO ND 5270 5310 0.153
25 7 15E 38 CC MO ND 5290 5290 0.084
25 8 15E 38 CC MO ND 5500 5700 0.245
25 9 15E 38 CC MO ND 5710 5710 0.249
25 1 15E 38 CC MO ND 5720 5720 0.134
25 11 15E 38 CC MO ND 5530 5690 0.228
25 12 15E 38 CC MO 5745 5825 0.262
25 13 15E 38 CC MO 5755 5795 0.27
25 14 15E 38 CC MO 5775 5775 0.195

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC