companies    

FCC ID: TX2-RTL8723DE 802.11 b/g/n RTL8723DE Combo module

by: Realtek Semiconductor Corp. latest update: 2018-07-05 model: RTL8723DE

Six grants have been issued under this FCC ID from 06/06/2016 to 07/05/2018 (this is one of one hundred and twenty-one releases in 2018 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, troubleshooting guides, warrantee terms, instructions, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manual photos
app s submitted / available
1 2 3 4 5 6 User Manual Users Manual pdf 2.52 MiB March 06 2016 / March 12 2016
1 2 3 4 5 6 Internal Photo Internal Photos pdf 768.84 KiB
1 2 3 4 5 6 External Photo External Photos pdf 958.64 KiB
1 2 3 4 5 6 C2PC Letter Cover Letter(s) pdf 65.52 KiB / May 07 2018
1 2 3 4 5 6 LTCR and STCR letter Cover Letter(s) pdf 68.06 KiB / May 07 2018
1 2 3 4 5 6 Module Declaration Letter Cover Letter(s) pdf 26.76 KiB / May 07 2018
1 2 3 4 5 6 Power of Attorney Letter Cover Letter(s) pdf 62.00 KiB / May 07 2018
1 2 3 4 5 6 Schematic Diagram Schematics pdf June 28 2018 confidential
1 2 3 4 5 6
Test Setup Photos pdf
1 2 3 4 5 6
Test Report pdf / May 07 2018
1 2 3 4 5 6
Test Setup Photos pdf
1 2 3 4 5 6
Test Setup Photos pdf
1 2 3 4 5 6
Test Report pdf / May 07 2018
1 2 3 4 5 6
Test Report pdf / May 07 2018
1 2 3 4 5 6
Test Report pdf / May 07 2018
1 2 3 4 5 6
Cover Letter(s) pdf
1 2 3 4 5 6
Cover Letter(s) pdf
1 2 3 4 5 6
Cover Letter(s) pdf
1 2 3 4 5 6
Cover Letter(s) pdf
1 2 3 4 5 6
RF Exposure Info pdf
1 2 3 4 5 6
Test Report pdf
1 2 3 4 5 6
Test Report pdf
1 2 3 4 5 6
Test Setup Photos pdf
1 2 3 4 5 6
Test Report pdf
1 2 3 4 5 6
Cover Letter(s) pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
External Photos pdf March 06 2016 / March 12 2016
1 2 3 4 5 6
Internal Photos pdf March 06 2016 / March 12 2016
1 2 3 4 5 6
ID Label/Location Info pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
RF Exposure Info pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
Test Report pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
RF Exposure Info pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
RF Exposure Info pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
RF Exposure Info pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
RF Exposure Info pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
Test Report pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
Test Report pdf March 06 2016 / June 06 2016
1 2 3 4 5 6
Test Setup Photos pdf March 06 2016 / March 12 2016
1 2 3 4 5 6
Test Setup Photos pdf March 06 2016 / March 12 2016
1 2 3 4 5 6
Test Report pdf March 06 2016 / June 06 2016
1 2 3 4 5 6 User Manual Users Manual pdf 2.52 MiB March 06 2016 / March 12 2016
1 2 3 4 5 6 Internal Photo Internal Photos pdf 768.84 KiB
1 2 3 4 5 6 External Photo External Photos pdf 958.64 KiB
1 2 3 4 5 6 C2PC Letter Cover Letter(s) pdf 65.52 KiB / May 07 2018
1 2 3 4 5 6 LTCR and STCR letter Cover Letter(s) pdf 68.06 KiB / May 07 2018
1 2 3 4 5 6 Module Declaration Letter Cover Letter(s) pdf 26.76 KiB / May 07 2018
1 2 3 4 5 6 Power of Attorney Letter Cover Letter(s) pdf 62.00 KiB / May 07 2018

frequency equipment class purpose
1 2018-07-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 2412 ~ 2472 DTS - Digital Transmission System
3 2016-12-20 2412 ~ 2472 DTS - Digital Transmission System
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2016-06-06 2412 ~ 2472 DTS - Digital Transmission System Original Equipment
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 Effective 2018-07-05
1 2 3 4 5 6 2016-12-20
1 2 3 4 5 6 2016-06-06
1 2 3 4 5 6 Applicant's complete, legal business name Realtek Semiconductor Corp.
1 2 3 4 5 6 FCC Registration Number (FRN) 0020109807
1 2 3 4 5 6 Physical Address No. 2 Innovation Road II, Hsinchu Science Park
1 2 3 4 5 6 No. 2
1 2 3 4 5 6 Hsinchu, N/A
1 2 3 4 5 6 Taiwan
app s TCB Information
1 2 3 4 5 6 TCB Application Email Address s******@nemko.com
1 2 3 4 5 6 T******@TIMCOENGR.COM
1 2 3 4 5 6 t******@timcoengr.com
1 2 3 4 5 6 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 Grantee Code TX2
1 2 3 4 5 6 Equipment Product Code RTL8723DE
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 Name D**** L********
1 2 3 4 5 6 Title Project Manager
1 2 3 4 5 6 Telephone Number 886-3******** Extension:
1 2 3 4 5 6 Fax Number 886-3********
1 2 3 4 5 6 E-mail d******@realtek.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)12/26/2018
1 2 3 4 5 6 06/18/2017
1 2 3 4 5 6 12/03/2016
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 DTS - Digital Transmission System
1 2 3 4 5 6 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 b/g/n RTL8723DE Combo module
1 2 3 4 5 6 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 Does not apply
1 2 3 4 5 6 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 Original Equipment
1 2 3 4 5 6 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 Grant CommentsClass II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively.
1 2 3 4 5 6 Class II Permissive Change: The changes under this application are: (1) to add new antennas of the same types and lower gain from original approval, (2) to update for A+E Key board. Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes.
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: 0.67 W/kg and 0.67 W/kg respectively. This device has 20 and 40 MHz bandwidth modes.
1 2 3 4 5 6 Single Modular Approval. Power listed is conducted. This module is restricted to installation in products for use in mobile, fixed, and portable applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, for mobile and fixed applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5-mm from all persons, for portable applications, and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Approval is limited to antennas provided with this module, or having gain less than 3.5 dBi, as described in this filing.. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for body and simultaneous transmission exposure conditions are: <0.10 W/kg and 0.67 W/kg respectively.
1 2 3 4 5 6 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 Firm Name SPORTON International Inc.
1 2 3 4 5 6 Name S**** J******
1 2 3 4 5 6 Telephone Number 886-3******** Extension:
1 2 3 4 5 6 Fax Number 886-3********
1 2 3 4 5 6 E-mail s******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.003
2 2 15C CC 2412 2472 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2412 2472 0.043
3 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2412 2472 0.043
5 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0040000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

potentially related items: TX2-RTL8822CE RTL8822CE- UserMan 20190523 TX2-RTL8723BS User Manual TX2-RTL8188CE Manual host TX2-RTL8187B Users Manual TX2-RTL8188CUS User Manual
recent releases: 2BDC6-4PM Shelly Europe Ltd. 2ABGH-R678L5S Reliance Communications LLC 2ANSF-HH SHENZHEN BESUNVO TECHNOLOGY CO. LTD 2AUYFRMX3853 Realme Chongqing Mobile Telecommunications Corp., Ltd. 2BCIE-ORA1 Shenzhen Fire Core lntelligent Equipment Co.,Ltd.

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC