all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 954.06 KiB | ||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report | |||||||
1 | Test Report |
1 | User Manual | Users Manual | 954.06 KiB |
MODEL HT-SB35D SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SB35D Sound Bar Home Theater system consisting of HT-SB35D (sound bar system) and CP-SW35D (active subwoofer system). ON/
STAND-BY MUTE CINEMA SOUND MODE MUSIC NEWS SURROUND BYPASS INPUT TV VOL CH VOL RRMCGA369AWSA Note: Accessories The following accessories are included. O N /
S T A N D -B Y U T E M S O U N D M M U SIC O D E N E W S CIN E M A B Y P A S S S U R R O U N D IN P U T T V C H V O L V O L RR M CGA369A W SA Remote control x 1
(RRMCGA369AW02) AC/DC adaptor x 2
(RADPAA100AWZZ) AC power cord x 2
(QACCDA005AWZZ) Optical cable x 1
(QCNWGA095AWPZ) Pattern paper x 1
(TCAUHA034AWZZ) Velcro tape
(loop type) x 2
(PSHEZA372AW01) Velcro tape
(hook type) x 1
(PSHEZA373AW01)
*TINSZB860AWZZT&*|
TINSZB860AWZZ HT-SB35D Spike leg x 2
(PCUSGA242AW01) NFC tag x 1
(GCASP9168AW01)
14M R KI 1 Special notes
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols:
-
-
-
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE
-
-
-
Warning:
FCC Radiation Exposure Statement
-
IC Radiation Exposure Statement (For Users In Canada)
-
-
Note to CATV system installer:
FOR YOUR RECORDS
-
.............................. Model number
.............................. Serial number
.............................. Date of purchase Place of purchase .............................. E-1 Important Safety Instructions
-
-
-
-
-
-
-
-
Additional Safety Information
-
-
-
-
-
-
-
-
-
E-2 For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO. Model Specific Section Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage
(if any):
Where to Obtain Service:
What to do to Obtain Service:
HT-SB35D SOUND BAR HOME THEATER SYSTEM
(Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase. Non-functional accessories, supplies, and consumable items. At a Sharp Authorized Servicer located in the United States. To find a location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and packaged securely. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Suite 1, Mahwah, NJ 07495-1123 Special Notes The Bluetooth
E-3 Precautions General Keep your equipment at least 4 (10 cm) of free space along the sides, top and back for proper ventilation. 4 (10 cm) 4 (10 cm) 4 (10 cm) SOUND BAR HOME THEATRE SYSTEM HT-SB35D 4 (10 cm) 4 (10 cm) 4 (10 cm) 4 (10 cm) Use the unit on a rm, level surface free from vibration. Keep the unit away from direct sunlight, strong magnet-
ic elds, excessive dust, humidity and electronic/electri-
cal equipment (home computers, facsimiles, etc.) which generate electrical noise. Do not place anything on top of the unit. Do not expose the unit to moisture, to temperatures higher than 140F (60C) or to extremely low tempera-
tures. If the unit does not work properly, unplug and plug it in again. Then turn on the unit. In case of an electrical storm, unplug the unit for safe-
ty. Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. Controls and indicators Front Panel SOUND BAR HOME THEATRE SYSTEM HT-SB35D The AC power plug is used as a disconnect device and shall always remain readily operable. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. This unit should only be used within the range of 41F
- 95F (5C - 35C). SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorised service center. Warning:
The supplied AC/DC adaptor contains no user ser-
viceable parts. Never remove covers unless qualied to do so. It contains dangerous voltages, always remove mains plug from the AC outlet before any service opera-
tion or when not in use for a long period. The AC/DC adaptor supplied with the HT-SB35D must not be used with other equipment. Never use an AC/DC adaptor other than the one speci-
ed. Otherwise, problem or serious hazards may be created. The voltage used must be the same as that specied on this unit. Using a higher voltage is dangerous and may result in a re or other type of accident causing damage. SHARP will not be held responsible for any damage re-
sulting from such usage. In case of repairing, please bring the entire system set to the service center. Volume control The sound level at a given volume setting depends on speaker efciency, location and various other factors. It is advisable to avoid exposure to high volume levels, which oc-
curs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. 1 43 5 6 7 2 98 1011 12 13 Pairing Indicator 1. Left Channel Speakers 2. Right Channel Speakers 3. On/Standby/Input/Bluetooth 4. On/Standby Button 5. Input Button 6. Pairing Button 7. Subwoofer Pairing Indicator 8. Surround Indicator 9. Surround Button 10. Volume Down Button 11. Volume Up Button 12. Audio Format Indicator 13. Remote Sensor 14. NFC detection area SOUND BAR HOME THEATRE SYSTEM HT-SB35D 14 E-4 Controls and indicators (continued) 1 2 3 MUTE ON/
STANDBY CINEMA SOUND MODE MUSIC NEWS BYPASS SURROUND INPUT TV VOL CH VOL RRMCGA369AWSA 4 2 3 14 15 16 17 18 1 1 2 3 4 5 6 7 8 9 10 11 12 13 Rear panel 1. DC In Jack 2. Optical In Jack 3. Audio In Jack Subwoofer 1. Bass Reex Duct 2. Woofer 3. DC In Jack 4. SW LINK (Subwoofer Link) button Remote Control 1. Remote Control Transmitter 2. Mute Button 3. Cinema (Sound Mode) button 4. Music (Sound Mode) button 5. Surround Button 6. Bypass (Sound Mode) button 7. TV Operation Buttons (only SHARP TV) 8. Bluetooth Pairing Button 9. Bluetooth Play/Pause Button 10. Bluetooth Skip Up Button 11. Bluetooth Skip Down Button 12. Subwoofer Level Down Button 13. Subwoofer Level Up Button 14. On/Standby Button 15. News (Sound Mode) button 16. Input Button 17. Volume Up/Down Buttons 18. Subwoofer Link Button Note:
Before using remote control, please remove plastic shield at battery holder. Remote control Plastic shield TV Operation Buttons (Only SHARP TV):
On/Standby Button Volume Up and Down Buttons VOL Sets the TV power to ON or STANDBY. Turn up/down the TV volume. Battery holder Input Select Button
(TV) Channel Up and Down Buttons Press the button to switch the input source. Switch up/down the TV channels. CH Note: Some models of SHARP TV may not be operable. SHARP TV remote control will not work with HT-SB35D system. E-5 System preparation Make sure to unplug the AC power cord before in-
stalling the sound bar or changing the position. Installing the sound bar 1 -
21-5/8 (548 mm) 509 mm Wall surface 44 mm Pattern paper
(supplied) 2
1-1/4 (32 mm) 3/8 (8-9 mm) Wall surface 3
1-1/4 (32 mm) 3/8 (8-9 mm) Wall surface 4
Wall surface Screw using screwdriver Wall surface 3/16 (4.5 mm - 5 mm) Gap from wall surface 5 Using spike legs 1 Spike leg Double sided tape separator 2 Bottom of sound bar To mount the sound bar on the wall Caution:
-
SHARP is not responsible for accidents resulting
from improper installation.
Driving screws SHARP designed the sound bar so you may hang it on the wall. Use proper screws (not supplied). See below for size and type. 1/8 (3.2 mm) 3/16
(5 mm) 3/8 (9 mm) 7/8 (Min. 22 mm) Falling prevention Safety wires (not supplied) are useful to prevent the sound bar from falling. When mounting on the wall Screw eye
(not supplied) Safety wires
(not supplied) SOUND BAR HOME THEATRE SYSTEM HT-SB35D Wall Sound bar E-6 Falling prevention (continued) When placing on the shelf/table Rack/
table Placing the system Installation image:
TV SOUND BAR HOME THEATRE SYSTEM HT-SB35D VCR DVD player Subwoofer Sound bar Screw eye
(not supplied) Safety wires
(not supplied) Screw eye
(not supplied) Notes:
Remove the protective lm covering the sound bar and subwoofer before turning on the system. The front panel of the sound bar is not removable. Caution:
Do not change the installation direction when the sound bar is turned on. Do not stand or sit on the sound bar or subwoofer as Do not allow any objects to fall into or to be placed in you may be injured. the bass reex duct. System connection Place the system as shown. After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet. Using with the AC/DC adaptor 1 Plug the AC power cord into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC INPUT jack on the sound bar and subwoofer. 3 Plug the AC power cord into an AC outlet. The Subwoofer Pairing indicator lights up. Notes:
Unplug the AC/DC adaptor from the AC outlet if the system will not be used for a prolonged period of time. Use only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an electric shock or re. Make sure to unplug the AC power cord before making any connections. AC/DC Adaptor Cable 2 CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. DC IN jack
(DC 19V) AC power cord 1 AC power cord 1 AC outlet AC/DC Adaptor
(AC 100 - 240 V
~ 50/60 Hz) AC outlet E-7 DC IN jack
(DC 19V) 2 AC/DC Adaptor
(AC 100 - 240 V ~
50/60 Hz) Sound bar connections to TVs Caution:
Turn off all other equipment before making any connections. Notes:
To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the rear of the sound bar. Refer the operation manual of the equipment to be connected. Fully insert the plugs to avoid fuzzy pictures or noises. If the TV volume is continuously at low level, the sound bar will automatically power off. Increase the TV output volume to enjoy the sound from the system. Connecting a TV, or DVD player, etc. If the TV/monitor has an audio or optical output, connect it to the AUDIO IN jack or OPTICAL IN jack on the rear of the sound bar. Press the INPUT button repeatedly to select:
Function On/Standby/Input/
Bluetooth Pairing Indicator OPTICAL IN AUDIO IN Bluetooth Turns green Turns cyan Turns blue Optical digital audio cable
(supplied) Audio cable (commercially available) TV or To audio output terminals i A u d o s g n a i l Audio cable To AUDIO IN input terminal Blu-Ray/DVD player/
Digital Tuner Optical digital audio cable To optical digital audio output terminal To OPTICAL IN
(optical) input terminal Sound bar Remote control WARNING Battery installation DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
1 While pushing the locking tab toward the center of the remote control, slide out the battery holder. Back of remote control Locking tab 2 Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control. Battery holder This product contains a CR Coin Lithium Battery which con-
tains Perchlorate Material special handling may apply. California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/
Polarity (+) symbol Battery type Locking tab Positive (+) side up E-8 Remote control (continued) General control Precautions for battery use:
Remove the battery if the sound bar will not be used for a long period of time. This will prevent potential damage due to battery leakage. Caution:
Do not use rechargeable battery (nickel-cadmium bat-
tery, etc.). Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like. Installing the battery incorrectly may cause the sound bar to malfunction. Notes concerning use:
Replace the battery if the operating distance is re-
duced or if the operation becomes erratic. Purchase CR 2025, coin lithium battery. Periodically clean the transmitter on the remote control and the sensor on the sound bar with a soft cloth. Exposing the sensor on the sound bar to strong light may interfere with operation. Change the lighting or the direction of the sound bar if this occurs. Keep the remote control away from moisture, heat, shock, and vibrations. Test of the remote control The remote control can be used within the range shown below:
Remote sensor SOUND BAR HOME THEATRE SYSTEM HT-SB35D 8 - 20
(0.2 m - 6 m) MUTE ON/
STANDBY CINEMA SOUND MODE MUSIC NEWS BYPASS SURROUND INPUT E-9 To turn the power on Press the ON/STANDBY button. The On/Standby/Input/Bluetooth Pairing indicator lights up according to input source:
Input source OPTICAL IN AUDIO IN Bluetooth Note:
If the power does not turn on, check whether the power cord is plugged in properly. To set the sound bar to standby mode:
Press the ON/STANDBY button again. The Subwoofer Pairing indicator lights up. Indicator Turns green Turns cyan Turns blue Bluetooth standby mode The rst time the sound bar is plugged in, it will enter the Bluetooth standby mode (Subwoofer Pairing indi-
cator lights up). To cancel the Bluetooth standby mode, press and hold the ON/STANDBY button during Bluetooth standby mode. The sound bar will enter the low power con-
sumption mode (Subwoofer Pairing indicator turns off). The subwoofer will enter the low power consumption mode approximately 3 minutes later. During low power consumption mode, to return to the Bluetooth standby mode, turn the sound bar on and off again. During Bluetooth standby condition, NFC function is activated once your device touches the NFC detection area or the supplied NFC tag. Connecting the wireless Subwoofer The sound bar and subwoofer will link automatically (wire-
lessly) when turned on as it is already pre-linked at the factory. If the link cannot be established, please set the connection by the following method. During pairing process:
Subwoofer Pairing indicator will blink. When pairing is successful:
Subwoofer Pairing indicator lights up. During sound bar standby and subwoofer power off mode
(AC power lead unplugged):
1. Press and hold the PAIRING button on the sound bar or SW LINK button on the remote control for more than 3 seconds. Subwoofer Pairing indicator will blink. 2. Within 3 minutes, plug in the AC power cord of the subwoofer and turn it on. Subwoofer pairing indicator will light up. In case the link is still not established (Subwoofer Pair-
ing indicator blinks), press and hold the SW LINK button at the back of the subwoofer until Subwoofer Pairing indicator lights up. SW LINK Remote control Sound bar Notes:
If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4GHz frequency near the system, some sound interruption may be heard due to interference. Subwoofer The maximum transmission distance of the wireless signal between the subwoofer and sound bar is about 32 (10 m), but may vary depending on your operating environment. General control (continued) If a steel-concrete or metallic wall is between the sub-
woofer and the sound bar, the system may not oper-
ate at all, because the wireless signal cannot penetrate metal. Caution:
Keep the subwoofer away from water and moisture. To get the optimum listening performance, make sure the area around the sound bar and subwoofer is clear of any obstacles. Volume auto fade-in If you turn off and on the sound bar again, volume will start at lower level and gradually increase to the last set level. Volume control Sound bar operation:
Press volume up (VOLUME + ) to increase the volume and press volume down (VOLUME ) to decrease the volume. Remote control operation:
Press the VOL + button to increase the volume and the VOL button to decrease the volume. Notes:
When volume is maximum or minimum the SURROUND indicator blinks 3 times To increase or decrease the volume continuously, press and hold the VOLUME +/- buttons (main unit) or VOL
+/- buttons (remote control). Muting The volume is muted temporarily when pressing the MUTE button on the remote control (SURROUND indicator blink-
ing). Press again to restore the volume. Surround When the SURROUND button is pressed, the SURROUND sound is ON. (SURROUND indicator lights up (orange)) Subwoofer level control The output level of the subwoofer can be adjusted with SW LEVEL buttons. To increase the level, press the SW LEVEL + button. To decrease the level, press the SW LEVEL - button. Notes:
When the level is maximum or minimum the SUR-
ROUND indicator blinks 3 times. Sound Mode Remote control operation:
Press the desired sound mode button on the remote control. The SURROUND indicator blinks once. CINEMA MUSIC NEWS BYPASS
(for cinema sound effect)
(for standard sound effect)
(for news)
(for at sound effect) Function When the INPUT button is pressed, the input source will change. 1 Optical In Function - the On/Standby/Input/Bluetooth 2 Audio In Function - the On/Standby/Input/Bluetooth 3 Bluetooth Function - the On/Standby/Input/Bluetooth Pairing indicator turns green. Pairing indicator turns cyan. Pairing indicator turns blue. Note:
The backup function will protect the memorized function mode for a few hours should there be a power failure or the AC power cord becomes disconnected. Auto power on function Auto power on function works only during Bluetooth standby mode (Subwoofer Pairing indicator lights up). It will not work if the sound bar is in low power consump-
tion mode (Subwoofer Pairing indicator is off). Optical In: Turn off the external source. The sound bar will automatically power ON if the external source is turned ON again. Audio In/Bluetooth: The sound bar will automati-
cally power ON if it detects audio signal from connected equipment. Auto power off and auto detect signal The sound bar will automatically go to standby mode
(Subwoofer Pairing indicator lights up) if:
Optical In: No audio signal is detected after approxi-
mately 15 minutes. Audio In: No audio signal is detected after approxi-
mately 15 minutes. Bluetooth:
- No connection after approximately 1 minute.
- In the pause or stop mode and no incoming signal from device after approximately 15 minutes. Audio format During the OPTICAL IN function the AUDIO FORMAT indicator will light up to indicate the audio format. Audio format Audio format indicator Blue Dolby Digital PCM
(Pulse Code Modulation) One of the digital audio systems for theatrical use. You can also enjoy the stereophonic effect in the home theater system. Lights up when detecting Dolby Digital signal. This is a general term for digitally encoded audio signals on a CD or DVD. This sound bar lets you enjoy playback of digital signals from sources such as CD or DVD. Violet Note:
This product supports Dolby Digital and PCM signal format for Optical Input. If there is no output from optical input, please set your optical source equipment to Dolby Digital or PCM signal format. E-10 Bluetooth one touch connection via NFC About NFC technology Near Field Communication (NFC) is a set of standards for devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together or bringing them into close proximity. Using NFC in this product simplies the pairing method of Bluetooth connectivity. Notes for Android devices This audio system supports NFC-enabled device with Android 4.1, Jelly Bean and higher. For device with a lower Android version, refer the operation manual of the device for recommended app (application). Unlike other wireless technology, NFC requires no discovery or pairing. Simply tap the source device to NFC detection area on the main unit or the NFC tag to instantly enjoy seam-
less connectivity between your smart device and the audio system. NFC detection area NFC detection area location may vary depending on the device (smartphone/tablet). Refer operation manual of the device for detail. N o t h h O e t o w it c B lu S S e a r c h / s c a n Pairing M anual Bluetooth setting Connect SOUND BAR HOME THEATRE SYSTEM HT-SB35D A Bluetooth audio source device
(smartphone/tablet). SOUND BAR HOME THEATRE SYSTEM HT-SB35D or NFC detection area HT-SB35D NFC tag
(during Bluetooth standby mode) NFC tag set up The NFC tags can be placed anywhere convenient to you. The velcro tapes supplied will help to secure the tags onto the desired location. Caution:
Make sure that the NFC tag is placed on a at and level surface. If you choose not to use the velcro tape, do not pla-
ce the NFC tag near metal surface to avoid connec-
tion interference during tagging. Important:
NFC tag has unique ID for each sound bar. SHARP will not be held liable for the damages caused by rewriting the tags. Keep all small parts away from children as they may be accidentally swallowed. 1 Peel the separator off the velcro tape (loop type) and stick it on a desired surface. Separator Velcro tape
(loop type) 2 Peel the separator off the velcro tape (hook type) and stick it to the rear of the NFC tag. Then place the tag onto the desired location. Velcro tape
(hook type) Separator rear view of the NFC tag E-11 Bluetooth one touch connection via NFC (continued) NFC connection for audio playback Check that:
Your device (smartphone/tablet) has an NFC function. NFC function on your device is enabled. Screen lock function of the device is off. This unit is not in low power consumption mode. Your device and NFC tag must be within 30 feet (10 meters) from the unit. 1 Touch your device to the NFC detection area on the main unit or supplied NFC tag. (NFC detection area of your device must touch to the NFC detection area of the main unit or supplied NFC tag.) NFC detection area Main unit Device or SOUND BAR HOME THEATRE SYSTEM HT-SB35D NFC tag 2 A pop-up window asking whether to proceed with the Bluetooth connection appears on the device. Select
<YES>. The connected message appears when the connection is complete. 3 Playback will start automatically, otherwise press play (on remote control or source device). Sound will be heard from the speakers of this unit via audio streaming. Your device and NFC tag must be within 30 feet (10 meters) from the unit. To disconnect, simply touch your device to the NFC detection area on the main unit or the NFC tag again. Bluetooth operation buttons (remote control only) Press the button to play or pause. Press the button to skip up. Press the button to skip down. Notes:
This product switches to Bluetooth function automati-
cally when NFC tagging was done by your device. If your device does not support NFC, or if you wish to listen to audio via Bluetooth connectivity without NFC tag; refer Pairing with other Bluetooth source de-
vices on the next page. Some Bluetooth devices will connect to this product automatically when the device or its Bluetooth mode was turned on. In such case, it will also change the function selection of this product. If you do not want it to connect automatically, please disable Bluetooth on your device. Listening to Bluetooth enabled devices Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 30 feet (10 meters) without the hassle of having to use cables to con-
nect these devices. This sound bar supports the following:
Communication System: Bluetooth Specication version 2.1 Bluetooth + Enhanced Data Rate (EDR). Support Prole : A2DP (Advanced Audio Distribution Prole) and AVRCP (Audio/Video Remote Control Prole) Notes when using unit with a mobile phone This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone. Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile phone while transmitting the sound using a Bluetooth connection. It takes about 6-8 seconds for a Bluetooth enabled de-
vice (eg. smartphone) to establish Bluetooth connec-
tion with this unit via NFC or manual connection. If Empty tag or similar message appears on your de-
vice, touch the device again to the NFC detection area on the main unit or supplied NFC tag. Pairing Bluetooth devices Bluetooth devices need to be initially paired rst before they can exchange data. Once paired, it is not necessary to pair them again unless:
pairing is made with more than 99 devices. Pairing can only be made one device at a time. This sound bar can be paired to a maximum of 99 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one. pairing information is deleted while repairing, etc. Bluetooth connection status Status Unconnected Pairing mode Connected INPUT indicator (blue) Blinks Blinks quickly Lights up However, the indicator status is not displayed during low power consumption mode. E-12 Listening to Bluetooth enabled devices (continued) HT-SB35D supports Bluetooth prole AVRCP 1.4. If your device supports the same prole (refer to device manufacturers specication), HT-SB35D is able to con-
trol the volume of the device. Note:
Some music applications do not support this feature, hence there will be no volume synchronisation between your device and the sound bar even if your Bluetooth device supports such prole. Listening to the sound Check that:
The source device Bluetooth functionality is ON. Pairing of this sound bar and the source device is com-
pleted. Sound bar is in connected mode (INPUT indicator (blue) lights up.) Any device connected to the AUDIO IN or OPTICAL IN jack is turned off. 1 Press the ON/STANDBY button to turn the power 2 Press the INPUT button to select Bluetooth func-
on. tion. 3 Start the Bluetooth connection from the Blue-
tooth stereo audio source device. 4 Playback will start automatically, otherwise press play (on the remote control or the source device). Notes:
For various Bluetooth operations, refer NFC connection for audio playback on page 12. If the source device has an extra bass function or equalizer function, set them to off. If these functions are on, sound may be distorted. Notes:
Make the Bluetooth connection again if the source de-
vice is not turned on, or its Bluetooth functionality is off or is in sleep mode. To disconnect the Bluetooth device Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source device. Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this sound bar. Note:
The volume of this sound bar may not be controlled as intended depending on the device. Pairing with other Bluetooth source device on. 1 Press the ON/STANDBY button to turn the power 2 Press the INPUT button to select Bluetooth func-
tion. (INPUT indicator blinks in blue.) 3 Press and hold the PAIRING button on the remote control for 3 seconds or more. INPUT indicator blinks quickly. The sound bar is now in pairing mode and is ready to be paired with other Bluetooth source device. 4 Perform pairing procedure on the source device to detect this sound bar. HT-SB35D SHARP will appear in the detected devices list (if available) in the source device. (Refer the source device oper-
ating manual for details). Notes:
Place the devices to be paired within 3 feet (1 me-
ter) of each other when pairing. Some source devices are unable to display lists of detected devices. To pair this sound bar with the source device, refer to the source device operating manual for details. 5 Select HT-SB35D SHARP from the source list. If Passcode* is required, enter 0000.
* Passcode may be called PIN Code, Passkey, PIN number or Password. INPUT indicator (blue) will stop blinking once the sound bar is successfully paired with the source device. (Pairing information is now memorized in the sound bar.) Some audio source devices may connect with the sound bar automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection. 6 7 Press the play button on remote control or source device to start Bluetooth streaming playback. Notes:
If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system some sound interruption may be heard. The transmission maximum distance of the wireless signal between the device and the sound bar is about 32 (10 m), but may vary depending on your operating environment. If a steel concrete or metallic wall is be-
tween the device and the sound bar, the system may not operate at all, because the wireless signal cannot penetrate metal. If this sound bar or the source device is turned off be-
fore Bluetooth connection is completed, pairing will not be completed and the pairing information will not be memorized. Repeat step 1 onward to start pairing again. To pair with other devices, repeat steps 1 - 5 for each device. This sound bar can be paired to a maximum of 99 de-
vices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one. Once a device is ousted or deleted from the pairing list, the pairing information for the device is also deleted. To listen to the sound from the device again, it needs to be re-paired. Perform steps 1 - 5 to pair the device again. E-13 Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the fol-
lowing before calling your authorised SHARP dealer or service center. General Symptom No sound is heard. Possible cause Is the input signal (selection) set properly?
Is the volume level set to minimum?
Is muting activated?
Are the connections made correctly?
Remote control Symptom The remote control does not operate properly. Noise is heard during playback. Sound is distorted. Move the sound bar away from any computers or mobile phones. TV output sound is distorted. Reduce the TV volume or sound bar volume. The sound bar cannot be turned on with the remote control. Possible cause Is the battery polarity correct?
Is the battery dead?
Is the distance or angle incorrect?
Are there any obstructions in front of the sound bar?
Is there a strong light shining on the remote sensor?
Is the remote control for another equipment used simultaneously?
Is the AC power cord of the sound bar plugged in?
Is the battery inserted?
Has the plastic shield at the remote control battery holder been removed?
Condensation Sudden temperature changes, storage or operation in an ex-
tremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the sound bar to malfunction. If this happens, leave the power on until normal operation is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the sound bar. Factory reset, clearing all setting Make sure to disconnect all audio input cables attached to the sound bar before performing the factory reset. 1. Press ON/STANDBY button to enter the power standby mode. 2. While pressing down the PAIRING button on the main unit, press the ON/STANDBY button. 3. Press the ON/STANDBY button again. (Subwoofer Pairing indicator will turn blue.) Caution:
This operation will erase all data stored in memory. If problem occurs during operation When this product is subject to strong external interference
(mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following:
1 Set the sound bar to the standby mode and turn the 2 power on again. If the sound bar is not restored in the previous operation, unplug and plug in the sound bar, and then turn the power on. When a button is pressed, the sound bar does not respond. The power is not turned on. No sound is heard at subwoofer. Set this sound bar to the standby mode and then turn it back on. If the sound bar still malfunctions, reset it.
(Refer to Factory reset, clearing all setting.) Is the sound bar unplugged?
(Refer to page 7.) The protection circuit may be activated. Unplug and plug in the power cord again after 5 minutes or more. Is the AC for subwoofer plugged in?
The subwoofer is not connected with the sound bar. Is the sound bar in mute?
If the subwoofer still malfunctions reconnect it to the sound bar. (Refer page 9.) NFC / Bluetooth Symptom NFC-enabled de-
vice cannot con-
nect to Bluetooth via NFC tag. No sound is heard. Bluetooth sound is interrupted or distorted. Possible cause Main unit is not in Bluetooth Is the sound bar too far from pairing mode. Perform NFC connection for audio playback. (Refer page 12.) the Bluetooth stereo audio source device?
Is the sound bar paired with the Bluetooth stereo audio source device?
Is the Bluetooth stereo audio source device in playback condition?
Is a headphone plugged to the Bluetooth stereo audio source device?
Is the sound bar too near to a device that generates electromagnetic radiation?
Is there any obstacle between the sound bar and the Bluetooth stereo audio source device?
E-14 Maintenance Cleaning the cabinet Periodically wipe the cabinet with a soft cloth. Cautions:
Do not use chemicals for cleaning (gasoline, paint thin-
ner, etc.). It may damage the cabinet nish. Do not apply oil to the inside of each component. It may cause malfunctions. SOUND BAR HOME THEATRE SYSTEM HT-SB35D
As part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement without prior notice. The perform-
ance specication gures indicated are nominal values of production unit. There may be some deviations from these values in individual unit. Sound bar Power source Power consumption Maximum output power Speaker Input terminals Bluetooth Frequency Band Compatible Bluetooth Prole Dimensions Weight Subwoofer Power source Power consumption Output power Speaker Dimensions Weight 3.42A: AC/DC DC IN 19V adaptor
(AC 100 - 240V ~ 50/60Hz) 10 W RMS: Total 60 Watts 30 Watts per channel into 6 ohms at 1 kHz, 10% total harmonic distortion FTC: Minimum 23 watts per channel into 6 ohms at 100 Hz to 20 kHz, 1% total harmonic distortion 2-way Speaker System 2-1/4 (5.7cm) Woofer 1 (2.5cm) Soft Dome Analog input (AUDIO IN):
Stereo mini jack 3.5mm 500mV / 47kohms Optical digital input (OPTICAL):
Square type x 1 2.400GHz - 2.480GHz A2DP (Advanced Audio Distribution Prole), AVRCP (Audio/
Video Remote Control Prole) Bluetooth 2.1 +EDR Width: 37 (940mm) Height: 2-7/8 (73mm) Depth: 3-1/4 (83mm) 5.1 lbs. (2.3 kg) 3.42A: AC/DC DC IN 19V adaptor
(AC 100 - 240V ~ 50/60Hz) Power on: 10 W RMS: Total 60 Watts 30 Watts per channel into 6 ohms at 1 kHz, 10% total harmonic distortion FTC: Minimum 23 watts per channel into 6 ohms at 100 Hz to 20 kHz, 1% total harmonic distortion 5-1/8(13 cm) Woofer Width: 7-3/8 (188 mm) Height: 11-1/8 (282 mm) Depth: 11-3/4 (299 mm) Weight: 6.4 lbs. (2.9 kg) E-15
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-11-23 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-11-23
|
||||
1 | Applicant's complete, legal business name |
S&O ELECTRONICS (MALAYSIA) SDN. BHD.
|
||||
1 | FCC Registration Number (FRN) |
0023459449
|
||||
1 | Physical Address |
LOT 202, BAKAR ARANG INDUSTRIAL ESTATE
|
||||
1 |
KEDAH, N/A
|
|||||
1 |
Malaysia
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@intertek.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB3N
|
||||
1 | Equipment Product Code |
CPSW35D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G****** C******
|
||||
1 | Title |
SENIOR MANAGER
|
||||
1 | Telephone Number |
604-4********
|
||||
1 | Fax Number |
604-4********
|
||||
1 |
g******@soem.sharpworld.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd. Kejiyuan B
|
||||
1 | Name |
S**** X****
|
||||
1 | Physical Address |
6F, D Block, Huahan Building
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
(86-7********
|
||||
1 | Fax Number |
(86-7********
|
||||
1 |
s******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd. Kejiyuan B
|
||||
1 | Name |
S****** X********
|
||||
1 | Physical Address |
6F, D Block, Huahan Building
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
(86-7********
|
||||
1 | Fax Number |
(86-7********
|
||||
1 |
s******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | ACTIVE SUBWOOFER SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be informed of the operating requirements for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd.
|
||||
1 | Name |
S****** X****
|
||||
1 | Telephone Number |
86-75******** Extension:
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
S******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 28 | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC