all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.01 MiB | July 05 2014 | |||
1 |
|
Internal Photos | Internal Photos | 1.42 MiB | July 05 2014 | |||
1 |
|
External Photos | External Photos | 414.43 KiB | July 05 2014 | |||
1 |
|
Label Artwork and Location | ID Label/Location Info | 457.35 KiB | July 05 2014 | |||
1 | RF Exposure Info | July 05 2014 | ||||||
1 | Test Report | July 05 2014 | ||||||
1 | Test Report | July 05 2014 | ||||||
1 | Test Setup Photos | July 05 2014 | ||||||
1 |
|
Confidentiality Request | Cover Letter(s) | 323.03 KiB | July 05 2014 | |||
1 |
|
Letter of Agency | Cover Letter(s) | 218.93 KiB | July 05 2014 | |||
1 | Test Setup Photos | July 05 2014 | ||||||
1 | Test Report | July 05 2014 |
1 | User Manual | Users Manual | 1.01 MiB | July 05 2014 |
MODEL XL-HF102B ENGLISH HI FI COMPONENT SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. This audio system supports devices with Android 4.1, Jelly Bean and higher. For device with a lower Android version, refer the operation manual of the device for recommended app (application). Accessories The following accessories are included. Remote control x 1
(RRMCGA357AWSA) FM antenna x 1
(92LFANT1535A) AM loop antenna x 1
(QANTLA006AWZZ)
*TINSEA468AWZZWY*|
TINSEA468AWZZ 14E R MW 1 Special notes For users in U.S. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols:
The lighning ash wih arrowhead sol wihin an euilaeral riangle is inended o aler he user to the presence of uninsulated dangerous voltage within the products enclosure that a e of suf-
cient agnitude to constitute a ris of electric shoc to persons. The eclaation point within an euilateral triangle is intended to alert the user to the presence of ipor-
tant operating and aintenance servicing instruc-
tions in the literature accopaning the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This proct is classie as a CLASS 1 LASER PRODUCT Caution
- Use of any controls, adjustments or procedures other than those specied herein may result in hazardous radiation exposure. NOTE This euipent has een tested and found to copl with the liits for a lass digital device pursuant to art 1 of the F Rules. These liits are designed to provide reasonale protection against harful interference in a residential instal-
lation. This euipent generates uses and can radiate radio freuenc energ and if not installed and used in accordance with the instructions a cause harful interference to radio counications. owever there is no guarantee that interfer-
ence will not occur in a particular installation. If this euipent does cause harful interference to radio or television reception which can e deterined turning the euipent off and on the user is encouraged to tr to correct the interference one or ore of the following easures Reorient or relocate the receiving antenna. Increase the separation etween the euipent and re-
onnect the euipent into an outlet on a circuit different
onsult the dealer or an eperienced radioT technician ceiver. fro that to which the receiver is connected. for help. Warning: hanges or odications to this unit not epressl approved the part responsile for copliance could void the users authorit to operate the euipent. FCC Radiation Exposure Statement This device coplies with the liits for a lass digital device pursuant to art 1 of the F Rules. It ust not e co-located or operating in conunction with an other antenna or transitter.
peration is suect to the following two conditions 1. This device a not cause harful interference and
. This device ust accept an interference received including interference that a cause undesired operation. This euipent should e installed and operated with a ini-
u distance of c etween the radiator and persons
od. IC Radiation Exposure Statement (For Users In Canada) This lass digital apparatus coplies with the anadian IES- lass specications. This device coplies with Industr anada license-eept RSS standards.
peration is suect to the following two conditions 1. this device a not cause interference and
. this device ust accept an interference including interfer-
ence that a cause undesired operation of the device. This euipent should e installed and operated with a ini-
u distance of c etween the radiator and persons od. ecluding etreities hands wrists feet and anles. Note to CATV system installer:
This reinder is provided to call the AT sste installers attention to Article 8 of the National Electrical ode that provides guidelines for proper grounding and in particular species that the cale ground shall e connected to the grounding sste of the uilding as close to the point of cale entr as practical. FOR YOUR RECORDS For our assistance in reporting this unit in case of loss or theft please record elow the odel nuer and serial nuer which are located on the rear of the unit. lease retain this in-
foration. ............................. Model number
.............................. Serial number Date of purchase
.............................. Place of purchase .............................. Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. E-1 Important Safety Instructions Electricit is used to perfor an useful functions ut it can also cause personal inuries and propert daage if iproperl handled. This product has een engineered and anufactured with the highest priorit on safet. owever iproper use can result in electric shoc andor re. In order to prevent potential danger please oserve the following instructions when install-
ing operating and cleaning the product. To ensure our safet and prolong the service life of this product please read the fol-
lowing precautions carefull efore use. 1 Read these instructions.
eep these instructions.
eed all warnings. 4 Follow all instructions.
o not use this apparatus near water. 6 lean onl with dr cloth.
o not loc an ventilation openings. Install in accordance with the anufacturers instructions. 8 o not install near an heat sources such as radiators heat registers stoves or other apparatus including apliers that produce heat.
o not defeat the safet purpose of the polaried or ground-
ing-tpe plug. A polaried plug has two lades with one wid-
er than the other. A grounding tpe plug has two lades and a third grounding prong. The wide lade or the third prong are provided for our safet. If the provided plug does not
t into our outlet consult an electrician for replaceent of the osolete outlet. 1 rotect the power cord fro eing waled on or pinched particularl at plugs convenience receptacles and the point where the eit fro the apparatus. 11 nl use attachentsaccessories specied the anu-
facturer. 1 Use onl with the cart stand tripod rac-
et or tale specied the anufacturer or sold with the apparatus. When a cart is used use caution when oving the cartap-
paratus coination to avoid inur fro tip-
over. 1 Unplug this apparatus during lightning stors or when un-
used for long periods of tie. 14 Refer all servicing to ualied service personnel. Servicing is reuired when the apparatus has een daaged in an wa such as power-suppl cord or plug is daaged liuid has een spilled or oects have fallen into the apparatus the apparatus has een eposed to rain or oisture does not operate norall or has een dropped. Additional Safety Information 1 ower Sources - This product should e operated onl fro the tpe of power source indicated on the aring lael. If
ou are not sure of the tpe of power suppl to our hoe consult our product dealer or local power copan. For product intended to operate fro atter power or other sources refer to the operating instructions. 16 verloading - o not overload wall outlets etension cords or integral convenience receptacles as this can result in a ris of re or electric shoc. 1 ect and iuid Entr - Never push oects of an ind into this product through openings as the a touch dan-
gerous voltage points or short-out parts that could result in a re or electric shoc. To prevent re or shoc haard do not epose this appli-
ance to dripping or splashing. No oects lled with liuids such as vases shall e placed on the apparatus. 18 aage Reuiring Service - Unplug this product fro the wall outlet and refer servicing to ualied service personnel under the following conditions a. When the A cord or plug is daaged
. If liuid has een spilled or oects have fallen into the product c. If the product has een eposed to rain or water d. If the product does not operate norall following the operating instructions. Adust onl those controls that are covered the operating instructions as an iproper ad-
ustent of other controls a result in daage and will often reuire etensive wor a ualied technician to restore the product to its noral operation e. If the product has een dropped or daaged in an wa and f. When the product ehiits a distinct change in perfor-
ance - this indicates a need for service. 1 Replaceent arts - When replaceent parts are reuired
e sure the service technician has used replaceent parts specied the anufacturer or have the sae character-
istics as the original part. Unauthoried sustitutions a result in re electric shoc or other haards.
Safet hec - Upon copletion of an service or repairs to this product as the service technician to perfor safet checs to deterine that the product is in proper operating condition.
1 Wall or ceiling ounting - When ounting the product on a wall or ceiling e sure to install the product according to the
ethod recoended the anufacturer.
ower ines - An outside antenna sste should not e located in the vicinit of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna sste etree care should e taen to eep fro touch-
ing such power lines or circuits as contact with the ight
e fatal.
rotective Attachent lug - The product is euipped with an attachent plug having overload protection. This is a safet feature. See Instruction Manual for replaceent or resetting of protective device. If replaceent of the plug is reuired e sure the service technician has used a re-
placeent plug specied the anufacturer that has the sae overload protection as the original plug.
4 Stand - o not place the product on an unstale cart stand tripod or tale. lacing the product on an unstale ase can cause the product to fall resulting in serious person-
al inuries as well as daage to the product. Use onl a cart stand tripod racet or tale recoended the
anufacturer or sold with the product. When ounting the product on a wall e sure to follow the anufacturers in-
structions. Use onl the ounting hardware recoended
the anufacturer. E-2 For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO. Model Specific Section Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage
(if any):
Where to Obtain Service:
What to do to Obtain Service:
XL-HF102B HI FI COMPONENT SYSTEM
(Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase. Non-functional accessories, supplies, and consumable items. At a Sharp Authorized Servicer located in the United States. To find a location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and packaged securely. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Suite 1, Mahwah, NJ 07495-1123 Special Notes The Bluetooth word ar and logos are registered tradears owned luetooth SI Inc. and an use of such
ars SAR is under license. ther tradears and trade naes are those of their respective owners.
-F1 i Fi oponent Sste consisting of -F1 ain unit and -F1 speaer sste. E-3 Precautions General
eep our euipent at least 4 1 c of free space along the sides top and ac for proper ventilation. 4 1 c 4 1 c 4 1 c 4 1 c Use the unit on a r level surface free fro viration.
lace the speaers at least 1 c awa fro an
RT T to avoid color variations across the T screen. If the variations persist ove the speaers further awa fro the T. T is not prone to such variation.
eep the unit awa fro direct sunlight strong ag-
netic elds ecessive dust huidit and electronic electrical euipent hoe coputers facsiiles etc. which generate electrical noise.
o not epose the unit to oisture to teperatures higher than 14F 6 or to etreel low tepera-
tures. If the unit does not wor properl unplug and plug it in In case of an electrical stor unplug the unit for safet.
old the A power plug the head when reoving it fro the A outlet as pulling the cord can daage internal wires. again. Then turn on the unit.
o not place anthing on top of the unit. The A power plug is used as a disconnect device and shall alwas reain readil operale. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your lo-
cal SHARP service facility. This unit should onl e used within the range of 41F
- F - . Warning:
The voltage used ust e the sae as that specied on this unit. Using a higher voltage is dangerous and a result in a re or other tpe of accident causing daage. SAR will not e held responsile for an daage result-
ing fro such usage. Volume control The sound level at a given volue setting depends on speaer efcienc location and various other factors. It is advisale to avoid eposure to high volue levels which occurs while turning the unit on with the volue control setting up high or while continuall listening at high vol-
ues. Ecessive sound pressure fro earphones and headphones can cause hearing loss. Controls and indicators 1 2 3 4 5 6 Front panel 1. Remote sensor 2. Timer indicator 3. Disc Tray 4. Volume Control 5. ON/STANDBY Button 6. FUNCTION Button 7. USB Terminal 8. Audio In Jack 9. Headphone Jack 7 8 9 10 11 12 13 14 15 10. Pairing Button 11. Tuner Preset Down, CD/USB Skip Down Button 12. Tuner Preset Up, CD/USB Skip Up Button 13. Disc/USB/Bluetooth Stop Button 14. Disc/USB/Bluetooth Play or Pause Button 15. Disc Tray Open/Close Button E-4 Controls and indicators (continued) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Remote control Time Down Button 1. Remote Control Transmitter 2. Open/Close Button 3. Bluetooth Play / Pause Button 4. USB Play / Pause Button 5. Pairing Button 6. CD/USB/Bluetooth Stop Button 7. Eco Button 8. Sleep Button 9. Treble Button 10. X-Bass Button 11. Bass Button 12. Folder Button 13. Tuning Down, Skip Down, Fast Reverse, 14. Memory Button 15. Tuner Preset Down Button 16. ON/STANDBY Button 17. CD Play / Pause Button 18. Tuner/Band Button 19. Audio/Line (Input) Button 20. Display Button 21. Mute Button 22. Dimmer Button 23. Volume Up Button 24. Volume Down Button 25. Clear Button 26. Play Mode Button 27. Tuner Preset Up Button 28. Tuning Up, Skip Up, Fast Forward, 29. Enter Button 30. Clock/Timer Button Time Up Button 1 2 3 4 5 6 7 9 1011 8 12 13 14 15 16 17 18 19 20 21 22 23 24 Speaker system 1. Tweeter 2. Woofer 3. Bass Reex Duct 4. Speaker cable 1 2 3 4 Display 1. USB Indicator 2. CD Indicator 3. MP3 Indicator 4. WMA Indicator 5. RDM (Random) Indicator 6. MEM (Memory) Indicator 7. Repeat Indicator 8. Play/Pause Indicator 9. Tuning FM/Bluetooth status Indicator 10. FM Stereo Mode Indicator 11. Stereo Station Indicator 12. Muting Indicator 13. X-bass Indicator 14. Title Indicator 15. Artist Indicator 16. Folder Indicator 17. Album Indicator 18. File Indicator 19. Track Indicator 20. Daily Timer Indicator 21. Once Timer Indicator 22. Disc Indicator 23. Total Indicator 24. Sleep Indicator E-5 System connections Make sure to unplug the AC power cord before making any connections. To select Line In function:
ress FUNTIN utton ain unit or AUIINE IN-
UT utton reote control repeatedl until ine in is displaed. Notes:
No sound is heard fro the suwoofer without a uilt-
Suwoofer re-out audio signal 1 ohs in aplier. at . Red
lac
oerciall availale Suwoofer
Aplier
uilt-In Audio cale
not supplied To T audio output ac. T FM antenna
eft speaer To INE input ac AM loop antenna Installing the supplied FM antenna AC outlet
(AC 100 -240 V ~
50/60 Hz)
For U.S. and anada odel
ael is located at the otto of the unit. The specication lael illustration a
e different fro the actual lael used. CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Antenna connection Supplied FM antenna:
onnect to the FM MS ac and position it where reception is est. External FM antenna:
Use an eternal FM antenna ohs coaial cale for
etter reception. isconnect the supplied FM antenna wire
efore use. Supplied AM loop antenna:
onnect to the AM terinal and position it where reception is est. lace it on a shelf etc. or attach it to a stand or a wall with screws not supplied. Installing the AM loop antenna
< Asseling >
< Attaching to the wall >
wall Screws not supplied Note:
eep the antenna awa fro the unit or A power cord to avoid noise picup. Speaker connection
+ speaker terminal
- speaker terminal red wire
lac wire Use speaers with an ipedance of 6 ohs or ore as lower ipedance speaers can daage the unit.
o not istae the right and the left channels. The right speaer is the one on the right side when ou face the unit.
o not let the are speaer wires touch each other.
o not allow an oects to fall into or to e placed in the ass ree ducts.
o not stand or sit on the speaers. ou a e inured. Incorrect Bluetooth standby mode The rst tie the unit is plugged in it will enter the Bluetooth stand ode. Bluetooth St will e dis-
plaed. To cancel the Bluetooth stand ode press the E
utton reote control during power stand ode. The unit will enter the low power consuption ode. To return to the Bluetooth stand ode press the E
utton again. AC power connection After all connections have een ade correctl plug the A power cord into the A outlet. Note:
Unplug the A power cord fro the A outlet if the unit will not e in use for a prolonged period of tie. E-6 Remote control Battery installation Use 1 AA size battery (UM/SUM-3, R6, HP-7 or similar). Battery is not included. 1 pen the atter cover. 2 Insert the atter according to the terinal indicated in the atter copartent. When inserting or reoving the atter push it toward the atter terinals. 3 lose the cover. Caution:
Reove the atter if the unit will not e used for a long period of tie. This will prevent potential daage due to atter leaage.
o not use rechargeale atter nicel-cadiu at-
ter etc.. Installing the atter incorrectl a cause the unit to
alfunction.
atteries atter pac or atteries installed shall not
e eposed to ecessive heat such as sunshine re or the lie. General control To turn the power on
ress the NSTAN utton to turn the power on or off. Display brightness control
ress the IMMER utton reote control. Dimmer 1 Dimmer 2 Dimmer off
ispla is di.
ispla gets dier.
ispla is right. Volume auto fade-in If ou turn off and on the ain unit with the volue set to
or higher the volue starts at 16 and fades in to the last set level. Volume control Turn the volue no toward UME ain unit or press reote control to increase or decrease the volue. Muting To ute the volue press the
ress again to restore the volue.
utton reote control. Direct key power on function When ou press an of the following uttons the unit turns on. CD
, AUDIO/LINE
(INPUT), TUNER (BAND), OPEN/CLOSE (remote control): Selected function is activated.
, BLUETOOTH
, USB
(main unit): The unit turns on and playback of the last function will start (CD, USB, BLUETOOTH, AUDIO IN, LINE IN, TUNER) Notes concerning use:
Replace the atter if the operating distance is reduced or if the operation ecoes erratic.
eriodicall clean the transitter on the reote control and the sensor on the unit with a soft cloth. Eposing the sensor on the unit to strong light a interfere with operation. hange the lighting or the di-
rection of the unit if this occurs.
eep the reote control awa fro oisture heat shoc and virations. Test of the remote control The reote control can e used within the range shown elow Reote sensor 8 -
. - 6 Auto power off function The ain unit will enter the stand ode after 1 inutes of inactivit during Audioine In No detection of input signal.
In the stop ode or no disc. US In the stop ode or no edia. Bluetooth In the pause ode or not connected condition. X-Bass control When the power is rst turned on the unit is in the etra
ass ode. -ASS indicator appears. To cancel this
ode press the -ASS utton reote control. Bass or Treble control 1 ress the ASS or TREE utton to select ass or Tre-
2 Within seconds press the UME or utton to ad-
le respectivel.
ust the ass or trele.
- 5 - 4........ + 4 + 5
- 5 - 4........ + 4 + 5 Function
ress the FUNTIN utton repeatedl to select desired function. CD FM STEREO FM MONO AM Bluetooth USB Line In Audio In Note:
The acup function will protect the eoried function
ode for a few hours should there e a power failure or the A power cord ecoes disconnected. E-7 Listening to Bluetooth enabled devices Bluetooth Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 meters (30 feet) without the hassle of having to use cables to connect these devices. This unit supports the following:
Communication System: Bluetooth Specication version 2.1 Bluetooth + Enhanced Data Rate (EDR). Support Prole : A2DP (Advanced Audio Distribution Prole) and AVRCP (Audio/Video Remote Control Prole) Notes when using unit with a mobile phone This unit cannot e used to tal over the telephone even when there is a Bluetooth connection ade to a oile phone.
lease refer to the operating anual supplied with the
oile phone for details on operation of our oile phone while transitting the sound using a Bluetooth connection. Pairing Bluetooth devices Bluetooth devices need to e initiall paired rst efore the can echange data. nce paired it is not necessar to pair the again unless pairing is ade with ore than devices. airing can onl e ade one device at a tie. This unit can e paired to a aiu of devices. If suseuent de-
vice is paired the oldest device paired will e deleted and replaced with the new one. this unit is reset. All pairing inforation is deleted when unit is reset. pairing inforation is deleted while re-pairing etc. Indicators Indicator Bluetooth status Condition Pairing with other Bluetooth source devices 1 ress the NSTAN utton to turn the power on. 2 ress the FUNTIN utton ain unit repeatedl or
UETT utton reote control to select Blue-
tooth function. luetooth appears on the displa. 3 ress and hold the AIRIN utton for seconds or
ore. Start airing appears on the displa. The unit is now in pairing ode and is read to e paired with other Bluetooth source device. 4 erfor pairing procedure on the source device to detect this unit. -F1 SAR will appear in the detected devices list if availale in the source device. Refer the source device operating anual for details. Notes:
lace the devices to e paired within feet 1 e-
ter of each other when pairing. Soe source devices are unale to displa lists of detected devices. To pair this unit with the source device refer to the source device operating an-
ual for details. 5 Select -F1 SAR fro the source list. If
asscode is reuired enter .
asscode a e called IN ode asse IN nuber or Password. 6
onnected appears on the displa once the unit is successfull paired with the source device. airing inforation is now eoried in the unit. Soe au-
dio source devices a connect with the unit auto-
aticall after pairing is copleted otherwise follow the instructions in the source device operating anual to start connection. 7 ress the pla utton on ain unit reote control or source device to start Bluetooth streaing plaac. Notes:
If a device such as icrowave oven wireless AN card Bluetooth device or an other device that uses the sae .4 freuenc near the sste soe sound interruption a e heard. The transission distance of the wireless signal e-
tween the device and the ain unit is aout 1
ut a var depending on our operating environent. If a steel concrete or etallic wall is etween the device and the ain unit the sste a not operate at all
ecause the wireless signal cannot penetrate etal. Blinks Lights up No indication In waiting or pairing ode
onnected Unconnected
owever the indication status is not displaed during Bluetooth stand ode. E-8 To disconnect the Bluetooth device
erfor an of the followings.
isconnect the Bluetooth connection on the audio source device. Refer the operating anual supplied with the device. Turn off the Bluetooth stereo audio source device. Turn off this unit. Note:
The volue of this unit a not e controlled as intended depending on the device. Auto power on
uring Bluetooth stand ode the unit will autoaticall power on when the Bluetooth connection has een set up
etween the ain unit and our device and the reain connected. Note:
This function is not applicale during Bluetooth stand
ode off. Listening to Bluetooth enabled devices (continued) If this unit or the source device is turned off efore Bluetooth connection is copleted pairing will not e copleted and the pairing inforation will not e e-
oried. Repeat step 1 onward to start pairing again. To pair with other devices repeat steps 1 - for each device. This unit can e paired to a aiu of de-
vices. If suseuent device is paired the oldest device paired will e deleted and replaced with the new one.
nce a device is ousted or deleted fro the pairing list the pairing inforation for the device is also deleted. To listen to the sound fro the device again it needs to e re-paired. erfor steps 1 - to pair the device again. Listening to the sound Check that:
The source device Bluetooth functionalit is N.
airing of this unit and the source device is copleted. Unit is in connected ode. 1 ress the NSTAN utton to turn the power on. 2 ress the FUNTIN utton to select Bluetooth func-
tion. 3 Start the Bluetooth connection fro the Bluetooth stereo audio source device. 4 ress the UETT
utton. Note:
If the source device has an etra ass function or eualier function set the to off to avoid sound dis-
tortion. Note:
Mae the Bluetooth connection again if the source device is not turned on or its Bluetooth functionalit is off or is in sleep
ode. E-9 Listening on Android devices Introduction : Open Accessory
pen Accessor support allows eternal US hardware
an Android US accessor to interact with an Android-
powered device in a special accessor ode. When an Android-powered device is in accessor ode the con-
nected accessor acts as the US host powers the us and enuerates devices and the Android-powered device acts in the US accessor role. Android US accessories are specicall designed to attach to Android-powered devices and adhere to the pen Accessor rotocol that allows the to detect Android-powered devices that support accessor ode. 1 Insert the connector to the device.
evice
SartphoneTalet
onnector 2 onnect the device to the ain unit via US connector. US connector
not supplied Android device playback 1 ress the NSTAN utton to turn the power on. 2 ress the US utton reote control or FUNTIN
utton repeatedl ain unit to select US function. 3 onnect the device SartphoneTalet to the unit. US Media will e displaed. 4 ress the pla utton on ain unit reote control or device. Notes:
If the source device has an extra bass or equalizer function, set them to off. If these functions are on, sound may be distorted. Incoming calls will pause the playback/application. Once the calls are answered, the conversation can only be heard through the built-in speaker of the cellular device. Turn on the device speaker or disconnect the device to start conversation. To disconnect the Android device 1 uit the application apps. 2 isconnect the device fro the US terinal. Various functions Function Remote control Track up/down Fast forward/
reverse Operation
ress in the plaac or stop ode. If ou press the utton in the stop ode press
utton to start the the desired trac.
ress and hold down in the plaac ode. Release the utton to resue plaac. Notes:
If non-compatible device is detected, Dev No Support will be displayed. Controls (play/pause/skip up/skip down) will function based on actual Applications (Apps) controls used on Android devices. Android is a trademark of Google Inc. E-10 Listening to a CD or MP3/WMA disc ON / STANDBY Various disc functions Function Main unit Remote control Operation Play Pause Stop Track up/down Fast forward/
reverse Random play
ress in the stop ode.
ress in the plaac
ode. ress the
utton to resue plaac fro the paused point.
ress in the plaac
ode.
ress in the plaac or stop ode. If ou press the utton in the stop ode press
utton to start the the desired trac.
ress and hold down in the plaac ode. Release the utton to resue plaac. To random play all tracks:
ress A ME utton on the reote control repeatedl until Rando appears. ress the To cancel random play:
ress the A ME utton again. RM indicator will disappear.
utton.
Notes:
If ou press the
utton during rando pla ou can ove to the trac selected net the rando
utton does not allow ou operation. owever the to ove to the previous trac. The eginning of the trac eing plaed will e located. In rando pla the unit will select and pla tracs auto-
aticall. ou cannot select the order of the tracs. Disc playback
ent. 1 ress the NSTAN utton to turn the power on. 2 ress the utton on the reote control or FUNTIN
utton repeatedl on the ain unit to select function. 3 ress the ENSE utton to open the disc copart-
utton to start plaac. 4 lace the disc on the disc copartent lael side up. 5 ress the ENSE utton to close the disc tra. 6 ress the To stop playback:
ress the Caution:
o not place two discs in one-disc-tra.
o not pla discs of special shapes heart octagon
utton. etc. It a cause alfunctions.
o not push the disc tra while it is oving. If the power fails wait until the power is restored. If T or radio interference occurs during operation
ove the unit awa fro the T or radio.
e sure to place 8 c disc in the iddle of the disc tra.
ue to the structure of the disc inforation it taes longer to read an MWMA disc than a noral
approiatel to seconds. Note for CD or MP3/WMA disc:
Rewritale ulti-session discs with unnished writing can still e plaed. E-11 Listening to a CD or MP3/WMA disc (continued) Repeat play or
utton.
utton. Repeat pla can pla one trac all tracs or a prograed se-
uence continuousl. To repeat one track:
Select desired trac using the
ress the A ME utton repeatedl until Repeat ne ap-
pears. ress the To repeat all tracks:
ress the A ME utton repeatedl until Repeat All ap-
pears. ress the
To repeat desired tracks:
erfor steps 1 - in rograed pla section on this page and then press the A ME utton repeatedl until Repeat All appears. To repeat one folder:
While in Folder mode on (MP3/WMA), press PLAY MODE button
repeatedly until Repeat Folder appears. Press the button. To cancel repeat play:
ress the A ME utton repeatedl until Noral appears and disappears.
utton.
Caution:
After perforing repeat pla e sure to press the utton.
therwise the disc will pla continuousl. Programmed play (CD) 1 While in the stop ode press the MEMR utton on the reote control to enter the prograing save ode. 2 ress the or
utton to select the desired trac. Selected trac nuer 3 ress the MEMR utton to save the trac nuer. 4 Repeat steps - for other tracs. Up to tracs can e prograed. If ou want to chec the prograed tracs press the MEMR utton repeatedl. To clear the pro-
graed tracs press the EAR utton. 5 ress the
utton to start plaac. Programmed play (MP3/WMA) 1 While in the stop ode press the MEMR utton to enter the prograing save ode. 2 ress the RESET or
utton on the reote con-
trol to select the desired folder. Then press the or lect the desired tracs.
utton reote control to se-
nuer. 3 ress the MEMR utton to save the folder and trac 4 Repeat steps for other foldertracs. Up to tracs can e prograed. 5 ress the
utton to start plaac. To cancel the programmed play mode:
utton. The
uring prograed stop ode press the displa will show Meor lear and all the prograed contents will e cleared. Adding tracks to the program:
If a progra has een previousl stored the MEM indi-
cator will e displaed. ress the MEMR utton. Then follow steps - to add tracs. Notes:
When the disc copartent is opened the progra is autoaticall canceled. If ou press the NSTAN utton to enter the stand ode or change the function fro to an-
other the prograed selections will e cleared.
uring the progra operation rando pla is not pos-
sile. Procedure to playback MP3/WMA disc with folder mode on To pla ac -RRW. 1 ress the utton on the reote control and load an MWMA disc. ress the FER utton and disc info will e displaed. M indicator WMA indicator TTA indicator Total nuer of folder 2 ress the RESET plaac folder. Folder ode on Total nuer of les or
utton to select desired FER indicator FER nuer First trac nuer in the folder 3 Select desired le to e plaed ac pressing the or
utton. 4 ress the
utton. laac will start and
le nae will e displaed. Title Artist and Alu nae are displaed if the are recorded on the disc. In case of plaac with the folder ode on press the RESET
utton and the folder can
e selected even though it is in plaacpause
ode. It will continue plaacpause ode in the 1st trac of the selected folder. or
ispla content can e changed pressing the
ISA utton. File nae displa Folder displa
ounter displa Title displa Alu displa Artist displa Note:
If Not Support is displaed it eans opright protected WMA le or Not supported plaac le is selected. E-12 Listening to USB mass storage device/MP3 player USB Note:
This product is not copatile with MT and AA le ss-
tes fro US ass storage device or M plaer. To play back USB/MP3 player with folder mode on / off 1 ress the US utton reote control or FUNTIN
utton ain unit repeatedl to select US function.
onnect the US eor device that has MWMA forat les on the unit. When the US eor is con-
nected to the ain unit the device inforation will e displaed. To plaac with folder ode on follow step elow. To plaac with folder ode off sip to step elow. or
utton to select desired plaac folder. To start pla-
ac go to step 4. To change the plaac folder press the RESET 2 ress the FER utton and press the RESET
utton to select another folder. 3 Select desired le to e plaed ac pressing the or or
utton. 4 ress the
US
utton. laac will start and the le nae will e displaed. Title Artist and Alu nae are displaed if the are recorded in the US eor device.
ispla content can e changed pressing the
ISA utton. Note:
To pause plaac
ress the
US
utton. To remove USB memory device 1 ress the 2 isconnect US eor device fro the US terinal.
utton to stop plaac. Notes:
SAR will not e held liale for the loss of data while the US eor device is connected to the audio sste. Files copressed in M andor WMA forat can e plaed ac when connected to the US terinal. This US eors forat supports FAT 16 or FAT . SAR cannot guarantee that all US eor de-
vices will wor on this audio sste. US cale is not recoended for use in this audio sste to connect to US eor device. Use of the US cale will affect the perforance of this audio sste. This US eor cannot e operated via US hu. The US terinal in this unit is not intended for a Eternal -storage cannot e plaed ac via US connection. terinal. If the data inside the US eor is large it a tae longer tie for the data to e read. This product can pla WMA and M les. It will au-
toaticall detect the le tpe eing plaed. If unpla-
ale le is plaed on this product Not Support is in-
dicated and the le will e autoaticall sipped. This will tae a few seconds. If anoral indications appear on the displa due to the unspecied le turn off the unit and then turn it on again. This product relates to US ass storage devices and M plaers. It a however face soe irregu-
larities due to various unforeseen reasons fro soe devices. Should this happen turn off the unit and then turn it on again.
uring function M plaer will not e charging. The following functions are the same as CD operations:
Page Various disc functions .................................................11 Random play .................................................................11 Repeat play .................................................................. 12 Programmed play (MP3/WMA) ................................... 12 Notes:
If US eor device is not connected US No Me-
dia will e shown on the displa. Fast forwardreverse is invalid when plaing ac a variale itrate le. Notes:
This unit onl supports ME-1 Audio aer- for-
at. Sapling Freuenc is 44.1 48
laac order for M les a differ depending on the writing software used during le download.
itrate which is supported M is ps WMA is 6416 ps. Files without MWMA forat cannot e plaed ac.
lalists are not supported on this unit. This unit can displa Folder Nae or File Nae up to
characters. Total nuer of folders read is including folder with non-plaale le. owever the displa shows onl folder with MWMA les. The displa plaac tie a not e displaed cor-
rectl when plaing ac a variale itrate le. WMA eta tag also supports title artist and alu nae which are recorded in WMA les. opright pro-
tected WMA les cannot e plaed ac. E-13 Listening to the radio ON / STANDBY Memorising a station
ou can store 4 FM and AM stations in eor and re-
call the at the push of a utton. reset tuning 1 erfor steps - in Tuning. 2 ress the MEMR utton. or 3 Within seconds press the RESET
utton to select the preset channel nuer. Store the stations in eor in order starting with preset channel 1. 4 Within seconds press the MEMR utton to store that station in eor. If the MEM and preset nuer indicators disappear efore the station is eoried repeat the operation fro step . 5 Repeat steps 1 - 4 to set other stations or to change a preset station. When a new station is stored in the
eor the station previousl eoried for that preset channel nuer will e erased. Note:
The acup function protects the eoried stations for a few hours should there e a power failure or the A power cord ecoe disconnected. To recall a memorized station
ress the RESET station. or
utton to select the desired To scan the preset stations or 1 ress and hold the RESET
utton until the preset nuer ashes. The prograed stations will
e tuned in seuentiall for seconds each. 2 ress the RESET or desired station is located.
utton again when the To erase entire preset memory 1 ress the NSTAN utton to turn the power on. 2 ress the FUNTIN utton ain unit repeatedl or TUNER utton reote control to select Tuner function. In Tuner function press and hold the EAR utton
reote control until Tuner lear appears. 3 Tuning 1 ress the NSTAN utton to turn the power on. 2 ress
reote control or FUNTIN utton ain unit repeatedl to select FM Stereo FM Mono or AM. the TUNER utton 3 Manual tuning:
utton repeatedl to or
ress the TUNIN tune in to the desired station. Auto tuning:
ress and hold the TUNIN
utton. Scanning will start autoaticall and the tuner will stop at the rst receivale roadcast station. or Notes:
When radio interference occurs auto scan tuning a stop autoaticall at that point. Auto scan tuning will sip wea signal stations. To stop the auto tuning press the TUNIN or
utton again. To receive an FM stereo transmission:
ress the TUNER utton to select stereo ode. ST and will appear indicator will e displaed. when an FM roadcast is in stereo. If the FM reception is wea press the TUNER utton to extinguish the ST indicator. The reception changes to onaural and the sound ecoes clearer. E-14 Setting the clock (Remote control only) Timer and sleep operation (Remote control only) the da press the ENTER utton. or 4 ress the In this exaple the cloc is set for the 1-hour AM 1 displa. 1 ress the NSTAN utton to turn the power on. 2 ress the TIMER utton. 3 Within 1 seconds press the ENTER utton. To adust
utton and then press the or
utton to select 4-hour or 1-hour displa and then press the ENTER utton. The 12-hour display will appear.
(AM 12:00 - PM 11:59) The 12-hour display will appear.
(AM 0:00 - PM 11:59) The 24-hour display will appear.
(0:00 - 23:59) 5 To adust the hour press the or
utton and then
utton once or press the ENTER utton. ress the to advance the tie 1 hour. old it down to advance continuousl. 6 To adust the inutes press the
utton and or or
utton then press the ENTER utton. ress the once to advance the tie 1 inute. old it down to advance the tie inutes interval. To conrm the time display:
ress the TIMER utton. The tie displa will ap-
pear for aout seconds. Note:
When power suppl is restored after unit is plugged in again or after a power failure reset the cloc. To readjust the clock:
erfor Setting the cloc fro step 1. If the loc does not appear in step step 4 for selecting the 4-hour or 1-
hour displa will e sipped. To change the 24-hour or 12-hour display:
1 lear all the prograed contents. Refer to Factor reset clearing all eor on page 1 for details. 2 erfor Setting the cloc fro step 1 onward. Timer playback:
The unit turns on and plas the desired source TUNER US AUI IN INE IN at a preset tie. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Once timer ( indicator):
nce tier pla wors for one tie onl at a preset tie. Daily timer (DAILY indicator):
ail tier pla wors at the sae preset tie ever da that we set. For exaple set the tier as a wae-up call ever orning. Using the once timer and daily timer in combination:
For exaple use the once tier to listen to a radio progra and use the dail tier to wae up. 1 Set the daily and once timer (pages 15 - 16). 1 inute or ore
ail tier
nce tier Start Stop Start Stop Timer playback Before setting timer:
hec that the cloc is set to the correct tie. If it is not set ou cannot use the tier function. For tier plaac lug in US or load discs to e plaed. 1 ress the NSTAN utton to turn the power on. 2 ress and hold the TIMER utton. 3 Within 1 seconds press the
utton to select
nce or ail and press the ENTER utton. or 4 Within 1 seconds press the or
utton to select Tier Set and press the ENTER utton. 5 To select the tier plaac source TUNER
utton. US AUI IN INE IN press the
ress the ENTER utton. When ou select the tuner select a station pressing the
utton and then press the ENTER ut-
ton. If a station has not een prograed No reset will e displaed and tier setting will e canceled. or or 6 To adust the da press the press the ENTER utton. or
utton and then 7 ress the ENTER utton to adust the hour. ress the or
utton and then press the ENTER utton. 8 To adust the inutes press the then press the ENTER utton. or
utton and 9 Set the tie to nish as in steps and 8 aove. 10 Adust the volue using the UME control and then press the ENTER utton. 11 ress the NSTAN utton to enter the power stand ode. TIMER indicator lights up. E-15 Timer and sleep operation (Remote control only) (continued) 12 When the preset tie is reached plaac will start. The volue will increase graduall until it reaches the preset volue. The tier indicator will lin during tier pla-
ac. Sleep operation The radio disc US Audio In and ine In can all e turned off autoaticall. 1 la ac the desired sound source. 2 ress the SEE utton. 3 Within seconds press the SEE utton repeatedl to select the tie. Sleep Sleep 8 ... Sleep Off Sleep 1 SEE indicator will appear. 4 5 The unit will enter the power stand ode autoaticall after the preset tie has elapsed. The volue will e turned down 1 inute efore the sleep operation nishes. To conrm the remaining sleep time:
1 While SEE is indicated press the SEE utton. To cancel the sleep operation:
ress the ONSTAN utton while SEE is indicated. To cancel the sleep operation without setting the unit to the stand ode proceed as follows. 1 While SEE is indicated press the SEE utton. 2 Within seconds press the SEE utton repeatedl until Sleep Off appears. To use timer and sleep operation together Sleep and timer playback:
For exaple ou can fall asleep listening to the radio and wae up to the next orning. 1 Set the sleep tie see aove steps 1 - . 2 While the sleep tier is set set the tier plaac
steps - page 1. Sleep tier setting Tier plaac setting End tie 1- inutes
esired tie Sleep operation will autoaticall stop Tier plaac start tie
utton. 13 When the tier end tie is reached the sste will enter the power stand ode autoaticall. Once timer:
The tier will e canceled. Daily timer:
The tier operates at the sae tie ever selected da. ancel the dail tier when it is not in use. Notes:
When perforing tier plaac using another unit connected to the US terinal or AUI IN ac se-
lect US or AUI IN or INE IN in step . This unit will turn on or enter the power stand ode au-
toaticall. owever the connected unit will not turn on or off. To stop the tier plaac follow step Cancelling the timer setting of this page. Checking the timer setting:
1 Turn the power on. ress and hold the TIMER
utton. 2 Within 1 seconds press the
nce or ail and press the ENTER utton. 3 Within 1 seconds press the Tier all and press the ENTER utton.
utton to select
utton to select or or Cancelling the timer setting:
1 Turn the power on. ress and hold the TIMER 2 Within 1 seconds press the or
utton to select
nce or ail and press the ENTER utton. 3 Within 1 seconds press the
utton to select Tier ff and press the ENTER utton. Tier will e canceled the setting will not e canceled. or Reusing the memorized timer setting:
The tier setting will e eoried once it is entered. To reuse the sae setting perfor the following operations. 1 Turn the power on. ress and hold the TIMER 2 Within 1 seconds press the
nce or ail and press the ENTER utton. 3 Within 1 seconds press the Tier n and press the ENTER utton.
utton to select 4 ress the NSTAN utton to enter the power
utton to select or or stand ode.
utton. E-16 Enhancing your system The connection cord is not included. urchase a coer-
ciall availale cord as shown elow. Troubleshooting chart If soething is wrong with this product chec the following
efore calling our authoried SAR dealer or service center.
ortale audio plaer etc. Audio cale not supplied Listening to the playback sounds of portable audio player, etc. 1 Use a connection cord to connect the portale audio plaer etc. to the AUIO IN ac. 2 ress the ONSTAN utton to turn the power on. 3 ress the AUIOINE INUT utton reote con-
trol or FUNTION utton repeatedl ain unit to select AUIO IN function. 4 la the connected euipent. If volue level of the connected device is too high sound distortion a occur. Should this happen adust the volue of the connected device. Note:
To prevent noise interference place the unit awa fro the television. Headphones
o not set the volue on to axiu at switch on. Excessive sound pressure fro earphones and head-
phones can cause hearing loss.
efore plugging in or unplugging the headphone re-
duce the volue.
e sure our headphone has a 18 . diaeter plug and ipedance etween 16 and ohs. The recoended ipedance is ohs.
lugging in the headphone disconnects the speaers au-
toaticall. General Symptom The cloc is not set to the correct tie. When a utton is pressed the unit does not respond. No sound is heard. Remote control Symptom The reote control does not operate. Bluetooth Symptom No sound is heard. Bluetooth sound is interrupted or distorted. Possible cause A power failure occurred. Reset the cloc. Refer page 1 Set the unit to the power stand ode and then turn it ac on. If the unit still
alfunctions reset it.
Refer page 1 Min. The volue level set to The headphones are not The speaer wires are not The unit is too far fro the connected. connected. Bluetooth stereo audio source device. The unit is not paired with the Bluetooth stereo audio source device. Possible cause wrong. The A power cord of the unit is not plugged in. The atter polarit is The atter is dead. The distance or angle is The reote control sensor incorrect. receives strong light. Possible cause The unit is too far fro the Bluetooth stereo audio source device. The unit is not paired with the Bluetooth stereo audio source device. The unit is too near to There is an ostacle a device that generates electroagnetic radiation.
etween the unit and the Bluetooth stereo audio source device. E-17 Troubleshooting chart (continued) Open Accessory Symptom No sound is produced. Possible cause The device is not plaing. The device is not properl The A power cord of the connected to the unit. unit is not plugged in.
evice will not charge. The device is not aing full contact with the US terinal. CD player Symptom
laac does not start.
laac stops in the iddle or is not perfored properl.
laac sounds are sipped or stopped in the iddle of a trac. Possible cause down. The disc is loaded upside The disc does not satisf The disc is distorted or the standards. scratched. The unit is located near
er dirt disc has een
ondensation has fored excessive virations. used. inside the unit. USB Symptom
evice cannot e detected.
laac does not start. Wrong tie displa. Wrong le nae displa. Tuner Symptom The radio aes unusual noises continuousl. Possible cause Is there an MWMA le availale Is the device properl connected Is it an MT device
oes the device contain AA le onl Is it a copright protected WMA le Is it a false M le Is ariale itrate le
eing plaed ac Is the File Nae written in hinese or apanese characters Possible cause The unit placed near a T or coputer. The FM antenna is not placed properl. Move the antenna awa fro the A power cord if it is located near. Condensation Sudden teperature changes storage or operation in an extreel huid environent a cause condensation inside the cainet picup etc. or on the transitter on the reote control. ondensation can cause the unit to
alfunction. If this happens leave the power on with no disc in the unit until noral plaac is possile aout 1 hour. Wipe off an condensation on the transitter with a soft cloth efore operating the unit. If problem occurs When this product is suect to strong external interfer-
ence echanical shoc excessive static electricit a-
noral suppl voltage due to lightning etc. or if it is oper-
ated incorrectl it a alfunction. If such a problem occurs, do the following:
1 Set the unit to the stand ode and turn the power on again. If the unit is not restored in the previous operation unplug and plug in the unit again and then turn the power on. Note:
If neither operation aove restores the unit clear all the
eor resetting it. 2 E-18 Troubleshooting chart (continued) Factory reset, clearing all memory 1 ress the ONSTAN utton to turn the power on. 2 ress FUNTION utton ain unit repeatedl or AUIOINE INUT utton reote control to enter Audio In ode. 3 ress 4 ress and hold
utton ain unit once.
utton ain unit until RESET appears. Caution:
This operation will erase all data stored in eor includ-
ing cloc tier settings and tuner preset. Before transporting the unit Reove all devices connected to the unit. Then set the unit to the power stand ode. arring the unit with other devices left connected or discs left inside ight da-
age the unit. Care of discs
iscs are fairl resistant to daage. owever istracing can occur due to accuulation of dirt on the surface.
o not ar on the non-lael side of the disc fro which signals are read. excessive oisture.
eep our discs awa fro direct sunlight heat and Alwas hold the discs the edges. Fingerprints dirt or water on the s can cause noise or istracing.
lean it with a soft dr cloth wiping straight out fro the center along the radius. Specications As part of our polic of continuous iproveent SAR reserves the right to ae design and specication chang-
es for product iproveent without prior notice. The per-
forance specication gures indicated are noinal val-
ues of production units. There a e soe deviations fro these values in individual unit. General Power source Power consumption Dimensions Weight Bluetooth frequency band Compatible Bluetooth Prole Amplier Output power A 1 - 4 6
ower on W Width 8 - 1 16
eight - 4 6
epth 11 - 14 8 4.6 ls. 1 g
.4 - .48 A Advanced Audio istriution
role AR Audioideo Reote ontrol role Bluetooth .1 ER RMS: Total 50 W (25 W per channel into 6 ohms at 1 kHz, 10% T.H.D.) FTC: 19 W minimum RMS per channel into 6 ohms from 20 Hz to 20 kHz, 1% T.H.D.
- Suwoofer re-out audio signal
1 ohs at
eadphones 16 - ohs
recoended ohs Audio In audio signal
4 ohs
ine in Analogue input
4 ohs Output terminals Speaers 6 ohs Input terminals Maintenance Cleaning the cabinet
eriodicall wipe the cainet with a soft cloth and a diluted soap solution then with a dr cloth. Caution:
o not use cheicals for cleaning gasoline paint thin-
ner etc.. It a daage the cainet.
o not appl oil to the inside of the unit. It a cause
alfunctions. Cleaning the CD pickup lens In order to ensure proper operation of the plaer preventative aintenance cleaning of the laser picup lens should e perfored peridicall. ens cleaners are coerciali availale. ontact our local software dealer for options. E-19 Tuner Frequency range FM 8. - 18. M AM - 11 4 FM and AM station Preset Speaker Type 2-wa tpe speaer sste 2 c tweeter 4 1 c woofer
W 6 ohs Width -12 1
eight 1-8 264
epth 6-16 14
.1 ls. 1. geach Maximum input power Rated input power 2 W Impedance Dimensions Weight Specications (continued) CD player Type Signal readout D/A converter Frequency response Dynamic range Single disc ulti-pla copact disc plaer Non-contact -ea seiconductor laser picup Multi it A converter
-
d 1 USB (MP3 / WMA) USB host interface Support le Bitrate support Other File system support
oplies with US 1.1 Full Speed. Mass Storage
lass. Support ul onl and I protocol. ME 1 aer WMA Non RM M ps WMA 64 16 ps Maxiu total nuer of M WMA les is 6. Maxiu total nuer of folders is INUSIE of root director. The ITA inforation supported are TITE ARTIST and AUM onl. Supports ITA version 1 and version 2. Support US devices with Microsoft WindowsOSFAT 12FAT 16 FAT 2. 2 te loc length for sector. E-20
1 | Confidentiality Request | Cover Letter(s) | 323.03 KiB | July 05 2014 |
SHARP S&O ELECTRONICS (MALAYSIA) SDN. BHD. company no. 21503-w)
(Formerly Known as SHARP-ROXY CORPORATION (M) SDN. BHD.) Lot 202, Bakar Arang Industrial Estate, 08000 Sungai Petani, Kedah, West Malaysia. Tel: 04-4232854 (10 Lines) Fax: 04-4552219 8" April 14 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: 2AB3N-XLHF102B Request is hereby submitted by S&O Electronics (Malaysia) Sdn. Bhd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and S&O Electronics
(Malaysia) Sdn. Bhd. reserves the right to discern which parties can obtain access to these information: :
Schematics Detailed Block diagrams Detailed Operational/Functional Description The rationale for request for confidentiality is as followings:
This information represents intellectual property of S&O Electronics (Malaysia) Sdn. Bhd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, a Name : GOH CHOOI CHUAN, MR. Title : SENIOR MANAGER SHPOO05RO3
1 | Letter of Agency | Cover Letter(s) | 218.93 KiB | July 05 2014 |
SHARP S&O ELECTRONICS (MALAYSIA) SDN. BHD. (Company No. 21503-W)
(Formerly Known as SHARP-ROXY CORPORATION (M) SDN. BHD.) Lot 202, Bakar Arang Industrial Estate, 08000 Sungai Petani, Kedah, West Malaysia. Tel: 04-4232854 (10 Lines) Fax: 04-4552219 3" March 2014 To whom it may concern, Letter of Agency l, an officer of _S&O Electronics (Malaysia) Sdn. Bhd. _ do hereby authorize Intertek Testing Services (Mr. Shawn Xing) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice.
| further certify that no party (as defined in 1.2002(b) of CFR 47, 2007) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-
Drug Abuse Act of 1988, 21 U.S.C., 862. Regards,
. >a Goh Chooi Chuan, Mr. Senior Manager SHPOO05RO03
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-05-07 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-05-07
|
||||
1 | Applicant's complete, legal business name |
S&O ELECTRONICS (MALAYSIA) SDN. BHD.
|
||||
1 | FCC Registration Number (FRN) |
0023459449
|
||||
1 | Physical Address |
LOT 202, BAKAR ARANG INDUSTRIAL ESTATE, 08000 SUNGAI PETANI
|
||||
1 |
LOT 202, BAKAR ARANG INDUSTRIAL ESTATE
|
|||||
1 |
KEDAH
|
|||||
1 |
Malaysia
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB3N
|
||||
1 | Equipment Product Code |
XLHF102B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G**** C****
|
||||
1 | Title |
SENIOR MANAGER
|
||||
1 | Telephone Number |
604-4********
|
||||
1 | Fax Number |
604-4********
|
||||
1 |
g******@soem.sharpworld.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd. Kejiyuan B
|
||||
1 | Name |
S****** X******
|
||||
1 | Physical Address |
6F, D Block, Huahan Building, Langshan Road
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
(86-7********
|
||||
1 | Fax Number |
(86-7********
|
||||
1 |
s******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd. Kejiyuan B
|
||||
1 | Name |
S****** X******
|
||||
1 | Physical Address |
6F, D Block, Huahan Building, Langshan Road
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
(86-7********
|
||||
1 | Fax Number |
(86-7********
|
||||
1 |
s******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HI FI COMPONENT SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd.
|
||||
1 | Name |
S**** X******
|
||||
1 | Telephone Number |
86-75******** Extension:
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
S******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC