all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 659.96 KiB | ||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report |
1 | User Manual | Users Manual | 659.96 KiB |
ENGLISH MODELHT-SB32D SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MUTE CINEMA BYPASS VOL ON/
STAND-BY SOUND MODE MUSIC NEWS SURROUND INPUT TV CH VOL RRMCGA322AWSA The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other trademarks and trade names are those of their respective owners. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Note: This product is recommended for flat panel TV (LED, LCD and plasma). Printed in Malaysia
*TINSEA503AWZZPA*|
TINSEA503AWZZ 15J R AS 1 Accessories The following accessories are included. O N /
S T A N D -B Y U T E M S O U N D M M U SIC O D E N E W S CIN E M A B Y P A S S S U R R O U N D IN P U T T V C H V O L V O L R R M C G A 3 2 2 A W S A Remote control x 1
(RRMCGA322AW02) AC/DC adaptor x 1
(RADPA100AWZZ) AC power cord x 1
(QACCDA005AWZZ) Optical cable x 1
(QCNWGA095AWZZ) Pattern paper x 1
(TCAUHA034AWZZ) 2 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for com-
pliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and persons body. Note to CATV system installer:
This reminder is provided to call the CATV system installers at-
tention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Special notes CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols:
INSIDE. REFER The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous volta-
ge within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FOR YOUR RECORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. Please retain this information. Model number Serial number Date of purchase Place of purchase
.............................. ............................. ............................. ............................. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not instal-
led and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
3 IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Ho-
wever, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of this product, please read the following precautions carefully before use. Read these instructions. 1) 2) Keep these instructions. Heed all warnings. 3) Follow all instructions. 4) Do not use this apparatus near water. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in 7) accordance with the manufacturers instructions. Do not install near any heat sources such as ra-
diators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two bla-
des with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Additional Safety Information 15) Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your pro-
duct dealer or local power company. For product intended to operate from battery power, or other sources, refer to the operating instructions. 16) Overloading - Do not overload wall outlets, exten-
sion cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17) Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the AC cord or plug is damaged, b. If liquid has been spilled, or objects have fallen c. If the product has been exposed to rain or wa-
into the product, ter, 9) 8) 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience re-
ceptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often re-
quire extensive work by a qualified technician to restore the product to its normal operation, e. If the product has been dropped or damaged in any way, and f. When the product exhibits a distinct change in performance - this indicates a need for service. 19) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, elec-
tric shock, or other hazards. 20) Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the pro-
duct is in proper operating condition. 21) Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. 4 IMPORTANT SAFETY INSTRUCTIONS (continued) 22) Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, ex-
treme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. sure the service technician has used a replace-
ment plug specified by the manufacturer that has the same overload protection as the original plug. 24) Stand - Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the ma-
nufacturer or sold with the product. When moun-
ting the product on a wall, be sure to follow the manufacturers instructions. Use only the mounting hardware recommended by the manufacturer. 23) Protective Attachment Plug - The product is equi-
pped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO. Model Specific Section Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage
(if any):
Where to Obtain Service:
What to do to Obtain Service:
HT-SB32D SOUND BAR HOME THEATER SYSTEM
(Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase. Non-functional accessories, supplies, and consumable items. At a Sharp Authorized Servicer located in the United States. To find a location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and packaged securely. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Suite 1, Mahwah, NJ 07495-1123 5 Warning:
The supplied AC/DC adaptor contains no user serviceable parts. Never remove covers unless qualified to do so. It contains dangerous voltages, always remove mains plug from the main outlet jack before any service operation or when not in use for a long period. The AC/DC adaptor supplied with the HT-SB32
/HT-SB20 must not be used with other equip-
ment. Never use an AC/DC adaptor other than the one specified. Otherwise, problem or serious hazards may be created. The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. Volume control The sound level at a given volume setting depends on speaker ef ciency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. Precautions General Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4 (10 cm) of free space along the sides and top of the equipment. 4 (10 cm) 4 (10 cm) 4 (10 cm) SOUND BAR HOME THEATER SYSTEM HT-SB32D Use the unit on a firm, level surface free from vibration. Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. Do not place anything on top of the unit. Do not expose the unit to moisture, to temperatu-
res higher than 140F (60C) or to extremely low temperatures. If your system does not work properly, disconnect the AC power cord from the AC outlet and replug. In case of an electrical storm, unplug the unit for safety. Hold the AC power plug by the head when remo-
ving it from the AC outlet, as pulling the cord can damage internal wires. The AC power plug is used as a disconnect devi-
ce and shall always remain readily operable. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. This unit should only be used within the range of 41F - 95F (5C - 35C). SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorized service center. 6 Controls and indicators Front Panel SOUND BAR HOME THEATRE SYSTEM HT-SB32D 1 43 5 6 7 2 98 1011 12 13 1. 2. 3. 4. 5. 6. 7. 8. 9. Left Channel Speakers Right Channel Speakers On/Standby/Input Indicator On/Standby Button Input Button Pairing Button Pairing Indicator Surround Indicator Surround Button Rear Panel 1 14 2 10. 11. 12. 13. 14. Volume Down Button Volume Up Button Audio Format Indicator Remote Sensor NFC detection area 1. 2. 3. DC In Jack Optical In Jack Audio In Jack 3 7 Controls and indicators (continued) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Remote Control Remote Control Transmitter Mute Button Cinema (Sound Mode) button Music (Sound Mode) button Surround Button Bypass (Sound Mode) button TV Operation Buttons (only SHARP TV) Bluetooth Pairing Button Bluetooth Play/Pause Button Bluetooth Skip Up Button Bluetooth Skip Down Button On/Standby Button News (Sound Mode) button Input Button Volume Up/Down Buttons 1 2 3 4 5 6 7 8 9 10 11 MUTE ON/
STAND-BY CINEMA SOUND MODE MUSIC NEWS BYPASS SURROUND INPUT TV VOL CH 12 13 14 VOL 15 RRMCGA322AWSA Remote control Plastic shield Battery holder Note:
Before using remote control, please remove plastic shield at battery holder. TV Operation Buttons (Only SHARP TV):
On/Standby Button Volume Up and Down Buttons Sets the TV power to ON or STANDBY. Turn up/down the TV volume. VOL Input Select Button (TV) Channel Up and Down Buttons Press the button to switch the input source. Switch up/down the TV channels. CH Note: Some models of SHARP TV may not be operable. SHARP TV remote control will not work with HT-SB32D system. 8 2 3 4 Make a hole on the wall following the screw point marks on the pattern paper by using a drill. 1-1/4 (32 mm) 3/8 (8-9 mm) Wall surface Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface. 1-1/4 (32 mm) 3/8 (8-9 mm) Wall surface Fasten the screws to the wall as shown below.
(Total screw is 2 pieces) Wall surface Screw using screwdriver Wall surface 3/16 (4.5 mm - 5 mm) Gap from wall surface 5 Hang the sound bar onto the screws. System preparation Make sure to unplug the AC power cord before installing the sound bar or changing the position. To mount the sound bar on the wall Caution:
Be very careful to prevent the sound bar [5.1 lbs.
(2.3 kg)] from falling when mounting on the wall. Before mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The sound bar may fall.) If unsure, consult a qualified service technician. Mounting screws are not supplied. Use appropri-
ate ones. Check all wall mount angle screws for looseness. Select a good location. If not, accidents may occur or the sound bar may get damaged. SHARP is not responsible for accidents result-
ing from improper installation. Driving screws SHARP designed the sound bar so you may hang it on the wall. Use proper screws (not supplied). See below for size and type. 1/8 (3.2 mm) 3/8 (9 mm) Min. 7/8 (22 mm) Installing the sound bar 3/16
(5 mm) 1 Fix the pattern paper to the wall in hori-
zontal position as below. 21-5/8 (548 mm) 509 mm Wall surface 44 mm Pattern paper
(supplied) 9 Placing the sound bar Installation image:
TV Place the sound bar as shown. SOUND BAR HOME THEATER SYSTEM HT-SB32D VCR DVD player Notes:
Remove the protective lm covering the sound bar before turning on the system. The front panel of the sound bar is not removable. Caution:
the Do not change installation direction when the sound bar is turned on. Do not stand or sit on the sound bar as you may be injured. Falling prevention Safety wires (not supplied) are useful to prevent the sound bar from falling. 10 Falling prevention (continued) When mounting on the wall Screw eye (not supplied) Safety wires
(not supplied) SOUND BAR HOME THEATER SYSTEM HT-SB32D Wall Sound bar When placing on the shelf/table Sound bar Rack/
table Safety wires
(not supplied) Screw eye
(not supplied) Screw eye
(not supplied) 11 Sound bar connections to TVs Caution:
Turn off all other equipment before making any connections. Notes:
To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the rear of the sound bar. Refer the operation manual of the equipment to be connected. Fully insert the plugs to avoid fuzzy pictures or noises. If the TV volume is continuously at low level, the sound bar will automatically power off. Increase the TV output volume to enjoy the sound from the speaker. To avoid desynchronized audio and video when using an external player, con-
nect the output signal from the player to TV and the audio output (from TV) to the sound bar. Connecting a TV, or DVD player, etc. If the TV/monitor has an audio or optical output, connect it to the AUDIO IN jack or OPTICAL IN jack on the rear of the sound bar. Press the INPUT button repeatedly to select:
Function On/Standby/Input Indicator OPTICAL IN AUDIO IN Bluetooth TV or Turns green Turns cyan Turns blue To audio output terminals Blu-Ray/DVD player/
Digital Tuner Optical digital audio cable To optical digital audio output terminal To OPTICAL IN
(optical) input terminal Sound bar i A u d o s g n a i l Audio cable
(commercially available) To AUDIO IN input terminal 12 Using with the AC/DC adaptor AC power connection After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet. 1 Plug the AC power cord into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC INPUT jack on the sound bar. 3 Plug the AC power cord into an AC outlet. The PAIRING indicator turns BLUE. Notes:
Unplug the AC/DC adaptor from the AC outlet if the sound bar will not be used for a prolonged period of time. Use only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an electric shock or re. Make sure to unplug the AC power cord before making any connections. AC/DC Adaptor Cable 2 DC IN jack
(DC 19V) AC outlet AC power cord 1 AC/DC Adaptor
(AC 100 - 240 V ~ 50/60 Hz) CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 13 Remote control WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD The remote control supplied with this prod-
uct contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two
(2) hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. This product contains a CR Coin Lithium Bat-
tery which contains Perchlorate Material spe-
cial handling may apply. California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/
Battery installation 1 While pushing the locking tab to-
wards the center of the remote con-
trol, slide out the battery holder. Back of remote control Locking tab 2 Remove the old battery from the battery holder, insert the new bat-
tery and then slide the battery hold-
er back into the remote control. Positive (+) side up Battery holder Polarity (+) symbol Battery type Locking tab 14 Precautions for battery use:
Remove the battery if the sound bar will not be used for a long period of time. This will prevent potential damage due to battery leakage. Caution:
Do not use rechargeable battery (nickel-
cadmium battery, etc.). Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like. Installing the battery incorrectly may cause the sound bar to malfunction. Notes concerning use:
Replace the battery if the operating distance is reduced or if the operation becomes er-
ratic. Purchase CR 2025, coin lithium battery. Periodically clean the transmitter on the re-
mote control and the sensor on the sound bar with a soft cloth. Exposing the sensor on the sound bar to strong light may interfere with operation. Change the lighting or the direction of the sound bar if this occurs. Keep the remote control away from mois-
ture, heat, shock, and vibrations. Test of the remote control The remote control can be used within the range shown below:
Remote sensor SOUND BAR HOME THEATER SYSTEM HT-SB32D 0.2 m - 6 m MUTE ON/
STAND-BY CINEMA SOUND MODE MUSIC NEWS BYPASS SURROUND INPUT General control To turn the power on Press the ON/STANDBY button. The On/Standby/Input Indicator lights up according to input source:
Input source On/Standby/Input Indicator OPTICAL IN Turns green Turns cyan AUDIO IN Bluetooth Turns blue Note:
If the power does not turn on, check whether the power cord is plugged in properly. To set the sound bar to standby mode:
Press the ON/STANDBY button again. The PAIRING indicator turns BLUE. Bluetooth standby mode The rst time the unit is plugged in, it will enter the Bluetooth standby mode
(PAIRING indicator turns BLUE). To cancel the Bluetooth standby mode, press and hold the ON/STANDBY button during Bluetooth standby mode. The unit will enter the low power consumption mode (PAIRING indicator turns off). During low power consumption mode, to return to the Bluetooth standby mode, press the ON/STANDBY button twice. During Bluetooth standby condition, NFC function is activated once your device touches the NFC detection area. Volume auto fade-in Volume control If you turn off and on the sound bar again, volume will start at lower level and gradually increase to the last set level. Sound bar operation:
Press volume up (VOLUME + ) to increase the volume and press volume down (VOLUME ) to decrease the volume. Remote control operation:
Press the VOL + button to increase the volume and the VOL button to decrease the volume. 15 Notes:
When volume is maximum or minimum the SURROUND indicator blinks 3 times increase or decrease the volume To continuously, press and hold the VOLUME
+/- buttons (main unit) or VOL +/- buttons
(remote control). Muting Surround The volume is muted temporarily when pressing the MUTE button on the remote control (SURROUND indicator blinking). Press again to restore the volume. When the SURROUND button is pressed, the SURROUND sound is ON. (SURROUND indicator lights up (ORANGE)) Remote control operation:
Press the desired sound mode button on the remote control. The SURROUND indicator blinks once CINEMA (for cinema sound effect) MUSIC NEWS BYPASS (for at sound effect)
(for standard sound effect)
(for news) Sound Mode Function When the INPUT button is pressed, the input source will change. 1 Optical In Function - the On/Standby/
Input indicator turns green. 2 Audio In Function - the On/Standby/
3 Bluetooth Function - the On/Standby/
Input indicator turns cyan. Input indicator turns blue. Note:
The backup function will protect the memorized function mode for a few hours should there be a power failure or the AC power cord becomes disconnected. General control (continued) Auto power on function Auto power on function works only during Bluetooth standby mode (PAIRING indicator is blue). It will not work if the sound bar is in low power consumption mode (PAIRING indicator is off). Optical In: Turn off the external source. The sound bar will automatically power ON if the external source is turned ON again. Audio In/Bluetooth: The sound bar will automatically power ON if it detects audio signal from connected equipment. Auto power off and auto detect signal The sound bar will automatically go to standby mode (PAIRING indicator turns blue) if:
Optical In: No audio signal is detected after approximately 15 minutes. Audio In: No audio signal is detected after approximately 15 minutes. Bluetooth:
- No connection after approximately 1 minute. In the pause or stop mode and no incoming signal from device after approximately 15 minutes.
-
Audio format During the OPTICAL IN function the AUDIO FORMAT indicator will light up to indicate the audio format. Audio format Dolby Digital Audio format indicator Blue One of the digital audio systems for theatrical use. You can also enjoy the stereophonic effect in the home theater system. Lights up when detecting Dolby Digital signal. This is a general term for digitally encoded audio signals on a CD or DVD. This sound bar lets you enjoy playback of digital signals from sources such as CD or DVD. PCM
(Pulse Code Modulation) Violet Note:
This product supports Dolby Digital and PCM signal format for optical input. If there is no sound from optical input, please set your optical source equipment to output Dolby Digital or PCM signal format. 16 Bluetooth one touch connection via NFC About NFC technology Near Field Communication (NFC) is a set of standards for devices (smartphones/tablets) to establish radio communication with each other by touching/tapping them together or bringing them into close proximity. Using NFC in this product simpli es the pairing method of Bluetooth connectivity. Notes for Android devices This audio system supports NFC-
enabled device with Android 4.1, Jelly Bean and higher. For device with a lower Android version, refer the operation manual of the device for recommended app (application). Unlike other wireless technology, NFC requires no discovery or pairing. Simply tap the source device to the NFC detection area on the main unit to instantly enjoy seamless connectivity between your smart device and the audio system. NFC detection area NFC detection area location may vary depending on the device (smartphone/
tablet). Refer operation manual of the device for detail. N witc h O Blu eto oth S S e a r c h /
s c a n M a n u a l Bluetooth setting Pairing Connect SOUND BAR HOME THEATER SYSTEM HT-SB32D A Bluetooth audio source device
(smartphone/
tablet). SOUND BAR HOME THEATRE SYSTEM HT-SB32D NFC detection area
(during Bluetooth standby mode) 17 Bluetooth one touch connection via NFC (continued) NFC connection for audio playback Check that:
1 2 Your device (smartphone/tablet) has an NFC function. NFC function on your device is enabled. Screen lock function of the device is off. This unit is not in low power consumption mode. Touch your device to the NFC detection area on the main unit. (NFC detection area of your device must touch to the NFC detection area of the main unit.) NFC detection area Main unit Device SOUND BAR HOME THEATER SYSTEM HT-SB32D A pop-up window asking whether to proceed with the Bluetooth connection appears on the device. Select <YES>. The connected message appears when the connection is complete. Playback will start automatically, otherwise press play (on remote control or source device). Sound will be heard from the speakers of this unit via audio streaming. Your device must be within 10 metres from the unit. 3 Bluetooth operation buttons (remote control only) Press the button to play or pause. Press the button to skip up. Press the button to skip down. Notes:
This product switches to Bluetooth function automatically when NFC tagging was done by your device. If your device does not support NFC, or if you wish to listen to audio via Bluetooth connectivity without NFC;
refer Pairing with other Bluetooth source devices on the next page. Some Bluetooth devices will connect to this product automatically when the device or its Bluetooth mode was turned on. In such case, it will also change the function selection of this product. If you do not want it to connect automatically, please disable Bluetooth on your device. It takes about 6-8 seconds for a Bluetooth enabled device (eg. smartphone) to establish Bluetooth connection with this unit via NFC or manual connection. If Empty tag or similar message appears on your device, touch the device again to the NFC detection area on the main unit. 18 Listening to Bluetooth enabled devices Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 metres (30 feet) without the hassle of having to use cables to connect these devices. This sound bar supports the following:
Communication System: Bluetooth Speci cation version 2.1 Bluetooth + Enhanced Data Rate
(EDR). Support Pro le : A2DP (Advanced Audio Distribution Pro le) and AVRCP (Audio/Video Remote Control Pro le) Notes when using unit with a mobile phone 1 2 3 4 This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone. Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile phone while transmitting the sound using a Bluetooth connection. Pairing Bluetooth devices Bluetooth devices need to be initially paired rst before they can exchange data. Once paired, it is not necessary to pair them again unless:
pairing is made with more than 99 devices. Pairing can only be made one device at a time. This sound bar can be paired to a maximum of 99 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one. pairing information is deleted while repairing, etc. Bluetooth indicators Status Unconnected Pairing mode Connected PAIRING indicator (blue) Blinks Blinks quickly Lights up However, the indicator status is not displayed during low power consumption mode. 19 Pairing with other Bluetooth source device Press the ON/STANDBY button to turn the power on. Press the INPUT button to select Bluetooth function. (PAIRING indicator blinks.) Press and hold the PAIRING button for 3 sec-
onds or more. PAIRING indicator blinks quickly. The sound bar is now in pairing mode and is ready to be paired with other Bluetooth source device. Perform pairing procedure on the source device to detect this sound bar. HT-SB32D SHARP will appear in the detected devices list (if avail-
able) in the source device. (Refer the source device operating manual for details). Notes:
Place the devices to be paired within 1 metre
(3 feet) of each other when pairing. Some source devices are unable to display lists of detected devices. To pair this sound bar with the source device, refer to the source device operat-
ing manual for details. 5 6 7 Select HT-SB32D SHARP from the source list. If Passcode* is required, enter 0000.
* Passcode may be called PIN Code, Passkey, PIN number or Password. Pairing indicator (blue) will stop blinking once the sound bar is successfully paired with the source device. (Pairing information is now memorized in the sound bar.) Some audio source devices may connect with the sound bar automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection. Press the play button on remote control or source device to start Bluetooth streaming playback. Listening to Bluetooth enabled devices (continued) Notes:
Pairing of this sound bar and the source device is completed. Sound bar is in connected mode (pairing indicator (BLUE) lights up.) Any device connected to the AUDIO IN or OPTICAL IN jack is turned off. 1 2 3 4 Press the ON/STANDBY button to turn the power on. Press the INPUT button to select Bluetooth function. Start the Bluetooth connection from the Bluetooth stereo audio source device. Playback will start automatically, otherwise press play (on the remote control or the source device). For various Bluetooth operations, refer NFC connection for audio playback on page 18. If the source device has an extra bass function or equaliser function, set them to off. If these functions are on, sound may be distorted. Notes:
Notes:
Make the Bluetooth connection again if the source device is not turned on, or its Bluetooth functionality is off or is in sleep mode. To disconnect the Bluetooth device Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source device. Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this sound bar. Note:
The volume of this sound bar may not be controlled as intended depending on the device. If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system some sound interruption may be heard. The transmission distance of the wireless signal between the device and the sound bar is about 10 m, but may vary depending on your operating environment. If a steel concrete or metallic wall is between the device and the sound bar, the system may not operate at all, because the wireless signal cannot penetrate metal. If this sound bar or the source device is turned off before Bluetooth connection is completed, pairing will not be completed and the pairing information will not be memorized. Repeat step 1 onwards to start pairing again. To pair with other devices, repeat steps 1 - 5 for each device. This sound bar can be paired to a maximum of 99 devices. If subsequent device is paired, the oldest device paired, will be deleted and replaced with the new one. Once a device is ousted or deleted from the pairing list, the pairing information for the device is also deleted. To listen to the sound from the device again, it needs to be re-paired. Perform steps 1 - 5 to pair the device again. HT-SB32D supports Bluetooth pro le AVRCP 1.4. If your device supports the same pro le
(refer to device manufacturers speci cation), HT-SB32D is able to control the volume of the device. Note:
Some music applications do not support this feature, hence there will be no volume synchronisation between your device and the sound bar even if your Bluetooth device supports such pro le. Listening to the sound Check that:
The source device Bluetooth functionality is ON. 20 Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom No sound is heard. Noise is heard during playback. Sound is distorted. When a button is pressed, the sound bar does not respond. The power is not turned on. Possible cause Is the input signal (selection) set properly?
Is the volume level set to minimum?
Is muting activated?
Are the connections made correctly?
Move the sound bar away from any computers or mobile phones. TV output sound is distorted. Reduce the TV volume or sound bar volume. Set this sound bar to the standby mode and then turn it back on. If the sound bar still malfunctions, reset it.
(Refer to page 22.) Is the sound bar unplugged? (Refer to page 13.) The protection circuit may be activated. Unplug and plug in the power cord again after 5 minutes or more. NFC / Bluetooth Symptom NFC-enabled device cannot connect to Bluetooth via NFC. Possible cause Main unit is not in Bluetooth pairing mode. Perform NFC connection for audio playback. (Refer page 18.) 21 No sound is heard. Bluetooth sound is interrupted or distorted. Is the sound bar too far from the Bluetooth stereo audio source device?
Is the sound bar paired with the Bluetooth stereo audio source device?
Is the Bluetooth stereo audio source device in playback condition?
Is a headphone plugged to the Bluetooth stereo audio source device?
Is the sound bar too near to a device that generates electromagnetic radiation?
Is there any obstacle between the sound bar and the Bluetooth stereo audio source device?
Remote control Symptom The remote control does not operate properly. The sound bar cannot be turned on with the remote control. Possible cause Is the battery polarity correct?
Is the battery dead?
Is the distance or angle incorrect?
Are there any obstructions in front of the sound bar?
Is there a strong light shining on the remote sensor?
Is the remote control for another equipment used simultaneously?
Is the AC power cord of the sound bar plugged in?
Is the battery inserted?
Has the plastic shield at the remote control battery holder been removed?
Troubleshooting chart Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the sound bar to malfunc-
tion. If this happens, leave the power on until normal operation is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the sound bar. Make sure to disconnect all audio input cables attached to the sound bar before performing the factory reset. 1. Press ON/STANDBY button to enter the power Factory reset, clearing all setting standby mode. 2. While pressing down the PAIRING button, press the ON/STANDBY button. 3. Press the ON/STANDBY button again.
(PAIRING indicator will turn BLUE.) Caution:
This operation will erase all data stored in memory. If problem occurs during operation When this product is subject to strong external inter-
ference (mechanical shock, excessive static electric-
ity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following:
1 2 Set the sound bar to the standby mode and turn the power on again. If the sound bar is not restored in the previous operation, unplug and plug in the sound bar, and then turn the power on. Maintenance Periodically wipe the cabinet with a soft cloth. Cautions:
Cleaning the cabinet Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet nish. Do not apply oil to the inside of each component. It may cause malfunctions. SOUND BAR HOME THEATER SYSTEM HT-SB32D 22 Specifications As part of our policy of continuous improve-
ment, SHARP reserves the right to make design and specication changes for product improvement without prior notice. The perform-
ance specication gures indicated are nominal values of production unit. There may be some deviations from these values in individual unit. General Power source DC IN 19V 3.42A: AC/DC adaptor
(AC 100 - 240V ~ 50/60Hz) 10 W RMS: Total 60 Watts 30 Watts per channel into 6 ohms at 1 kHz, 10% total harmonic distortion FTC: Minimum 23 watts per channel into 6 ohms at 100 Hz to 20 kHz, 1% total harmonic distortion 2-way Speaker System 2-1/4 (5.7cm) Woofer 1 (2.5cm) Soft Dome Analog input (AUDIO IN):
Stereo mini jack 3.5mm 500mV / 47kohms Optical digital input
(OPTICAL): Square type x 1 2.402GHz - 2.480GHz A2DP (Advanced Audio Distribution Pro le), AVRCP
(Audio/Video Remote Control Pro le) Bluetooth 2.1 +EDR Width: 37 (940mm) Height: 2-7/8 (73mm) Depth: 3-1/4 (83mm) 5.1 lbs. (2.3 kg) Power consumption Maximum output power Speaker Input terminals Bluetooth Frequency Band Compatible Bluetooth Pro le Dimensions Weight
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-09-25 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-09-25
|
||||
1 | Applicant's complete, legal business name |
S&O ELECTRONICS (MALAYSIA) SDN. BHD.
|
||||
1 | FCC Registration Number (FRN) |
0023459449
|
||||
1 | Physical Address |
LOT 202, BAKAR ARANG INDUSTRIAL ESTATE
|
||||
1 |
KEDAH, N/A
|
|||||
1 |
Malaysia
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@intertek.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB3N
|
||||
1 | Equipment Product Code |
HTSB32D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G******** C******
|
||||
1 | Title |
SENIOR MANAGER
|
||||
1 | Telephone Number |
604-4********
|
||||
1 | Fax Number |
604-4********
|
||||
1 |
g******@soem.sharpworld.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd. Kejiyuan B
|
||||
1 | Name |
S**** X****
|
||||
1 | Physical Address |
6F, D Block, Huahan Building, Langshan Road
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
(86-7********
|
||||
1 | Fax Number |
(86-7********
|
||||
1 |
s******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd. Kejiyuan B
|
||||
1 | Name |
S******** X****
|
||||
1 | Physical Address |
6F, D Block, Huahan Building, Langshan Road
|
||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
(86-7********
|
||||
1 | Fax Number |
(86-7********
|
||||
1 |
s******@intertek.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SOUND BAR HOME THEATRE SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed of the operating requirements for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Intertek Testing Services Shenzhen Ltd.
|
||||
1 | Name |
S****** X****
|
||||
1 | Telephone Number |
86-75******** Extension:
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
S******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC