FCC ID: VW3FAST5290 Wireless Home Router

Safety and Certifications Important Information about the Sagemcom FAST 5290 (FWR226e):

Installation and Safe Usage Instructions:

1. Place the router in a vertical orientation on a flat surface. 2. Connect the manufacturer supplied AC to DC power adapter. The FAST 5290 router requires the use of a 12VDC, 4.1A power adapter. Only use a manufacturer supplied and approved power adapter, power cord and Ethernet cable. 3. Connect the FAST 5290 to the AC Mains in accordance with the installation instructions in this booklet, and the markings on the identification label (voltage, current, and frequency of electricity network). 4. Connect the Ethernet cable (provided) to the RJ45 port labeled wan on one end and to the Internet access device provided by your ISP on the other end. 5. For connection of a computer with an Ethernet cable use one of the RJ45 ports on the product marked "1", "2". Then connect the other end of the Ethernet Cable to the Ethernet port of a computer. Repeat as necessary with the other available Ethernet ports. 6. It is not allowed to connect to public cable distribution or cable television network. 7. Battery: Use to connect to the battery with USC Link cable provided by dedicated battery vendor. This port only used to transmit the signal data. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons including the following:

1. Do not use this product near water and avoid contact with moisture. For example, does not use near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Care should be taken so that liquids are not spilled on this equipment. 2. This equipment is for indoor use only, do not place or install in an outdoor location. 3. Place your product on a firm, solid surface, no obstacle at a minimum distance of 20cm (0.65feet). If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as rug, sofa or cushion, the vents may be blocked, causing the product to overheat. 4. Never insert objects into the vents of this equipment as this can result in the risk of electrical shock or fire. 5. As the power adapter is the only way to connect to the electrical network, the product must be installed near an 6. This equipment should only be operated with the type of power supply (Voltage and Current) indicated on the easily accessed power outlet. marking label. 7. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or electrical shock. 8. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. 9. The equipment should be situated away from heat sources such as radiators, heat registers, stoves, or other heat producing appliances and equipment. 10. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on or pinched by items placed upon or next to it. cleaning only. 11. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for 12. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do not disassemble this equipment. If service is required, disconnect all power from the equipment and consult qualified service personnel. 13. To disconnect this equipment from AC power, unplug the power supply from the AC wall socket. 14. It is not allowed to connect to public cable distribution or cable television network. 15. Use the product in the environment specified as below:

Air temperature between 0C (32 F) and +45C (113 F). Relative humidity between 20% and 90%. Altitude: 2743 meters (9000feet) maximum. 16. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. 17. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. 253923819 20 July 2021 1 Safety and Certifications Federal Communications Commission (FCC) Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Modifications:

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Responsible Party:

Sagemcom USA 14651 N. Dallas Parkway Suite 900 Dallas, TX 75254 Phone: 972-674-4100 Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device produces radio frequency energy in the 2.4GHz, 5GHz and 6GHz spectrum. The antenna must be positioned to keep a minimum distance of 25 cm (0.82 feet) from the radiating element to any nearby person. FCC regulations restrict the operation of this device to indoor use only. Issued by Sagemcom Broadband SAS Sagemcom Broadband 250, route de l'Empereur - 92500 RUEIL MALMAISON FRANCE Sagemcom Broadband SAS 2021 All rights reserved. Subject to availability. Rights of modifications reserved. www.sagemcom.com 253923819 20 July 2021 2

Sagemcom CO Beriaceens Router Serial Number: UUYYDDDMMXXXXXX PIN 253806149 AMATO FCC ID: VW3FAST5290 MAC: 40:65:A3:FF-A7:B0 Input Voltage: 12V = 4.1A Advanced Device Configuration:

http://192.168.254.254 Device Access Code:

4346343651 Model: FAST 5290 Assembled in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two et c i Network Name: Frontier7890 i Password: 1234567890 conditions: (1) This device may not cause harmful interference, and (2) This device must LISTED accept any interference received, including interference that may cause undesired operation. umm =e, A WARNING 308616 Tested To Comply With FCC Standards INDOOR USE ONLY This product can expose you to chemicals including Bisphenol-A which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

F5290 Top different 7. 9. 14. 10. 11. 12. 13. 8. 15. 7. To optimize WIFI power control 8. Add thermal pad for CPU thermal solution 9. To optimize WIFI power performance 10. To optimize WIFI power performance 11. For GPIO extender move 12. Co-layout EMMC flash for flash shortage issue 13. To optimize Power DC/DC 14. To optimize FXS surge protection 15. 2.5G white Ethernet connector change to yellow 1 F5290 Bottom different 1. 2. 4. 6. 5. 1. To optimize WIFI power control 2.DC/DC move to add 2.4G Heat sink for 3. thermal solution 3. Heat sink for 2.4G thermal solution 4. Co-layout EMMC flash for flash shortage issue 5. To optimize MoCA DC/DC performance 6. To optimize ethernet 2.5G performance 2

SaceMeon BROA BA DSA 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Confidential Letter Date: 2022/5/11 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID : VW3FAST5290 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

e@ Block Diagrams

@ Schematics The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Respectfully, Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Signature Name and Job Title Jacques LE ROUX / R&D General Methods Department Manager E-Mail jacques.leroux@sagemcom.com Tel +33 (0)157 61 25 72 STelelelrsvereyer Sagemcom Broadhand S.A.S Au capital de 58 251 44 7.36 440 294 510 RCS NANTERRE Fax +33 (0)1 57 61 38 99 Sioge Social :

2 ute de I'Empereur RUEIL-MALMAISON o)=1b) =>

NCE Tl : +33 (0)1 57 61 10 00 SAGEMCOM- Headquarter: 250 Route de |'Empereur 92848 RUEIL MALMAISON CEDEX - FRANCE

emco SAGEMCOM BROADBAND SAS P f At as Gel ger mm om om, 250 Route de |Empereur - 92848 RUEIL MALMAISON CEDEX- FRANCE owero _ torney Date: 2022/5/11 Dear Sir,

| hereby have entrusted the following person to be a proxy regarding application for Type Certification Sporton International Inc. Hsinchu Laboratory Address No.8, Lane 724, Bo-ai St., Jnubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Ae) om ial) : Manager e-mail : Leohuang@sporton.com.tw

| am therefore responsible for the contents of the application. FCC ID: VW3FAST5290 Respectfully, Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Signature Name and Job Title Jacques LE ROUX / R&D age co Sagemcom Broadband S.A.S 433 (0)1 57612572 Au capital de 58 254 417,36 440 294 510RCS NANTERRE E-Mail jacques.leroux@sagemcom Tel

+33 (0)1 57 61 38 99 Sige Social 259 route de l'Empereur 2848 RUEIL-MALMAISON CE FRANCE nex Fax Tl. : +33 (0)1 57 61 10 00 Headquarter: 250 Route de |'Empereur 92848 RUEIL MALMAISON CEDEX - FRANCE

SAGEMCOM BROADBAND SAS

| lh L 250 Route de |Empereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Cass C ange etter Date: 2022/1/27 im =ro(=)e-] Mol anvaelelal(ersiace)acmeelanrl cst (eln}

FCREMOr) <rlalomiuilicmacercis, Columbia MD 21046 o Whom It May Concern:

Request for Class Ill Permissive Change FCC ID: VW3FAST5290 / Grant Date: 01/26/2022 Pursuant to CFR 2.1043, SAGEMCOM BROADBAND SAS hereby requests a Class III Permissive Change. Wikefellitercidlelan 1. Adding UNII 2A and UNII 2C (5250~5350 MHz, 5470~5725 MHz) for this device. 2. Adding 160MHz bandwidth to S5GHz. Update above items through SW change (SW version: SGIt3200FOOE) and the SW upgrade is available to devices currently in he field. Note:

Antenna Composite Gain report is the same as the original filing. here is no change in hardware or in existing RF relevant portion Respectfully, Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de lEmpe_ ir DEX- FRANCE cen Sagemcom Broadband S.A.S, Au capital de Signature NANTERRE Social!

route de fEmpereur CEDEX Name and Job Title Jacques LE ROUX / R& Methods Depa Manager TA.:433 | S7ET1O09 E-Mail jacques.leroux@

Tel +33 (0)1 57 61 25 72 Fax +33 (0)1 57 61 38 99

SAGEMCOM BROADBAND SAS Long Term Confidentiality Short Term Confidentiality 250 Route de lEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE Confidential etter Date: 2022/1/27 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID : VW3FAST5290 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment o information accompanying this application as outlined below:

@ Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

@ Test Setup photos Respectfully, Applicants company name SAGEMCOM B Applicants company address 250 Route de lEm DEX- FRANCE Sagemcom Broadband S.A.S. Au capital de

. NANTERRE Signature Sige Social :

o 1ie de VEmpereur FUEIL-MALMAISON CEDEX Name and Job Title Jacques LE ROUX / General Methods Department Tl. +33 (0)1 57 61 in 00 E-Mail jacques.leroux@sagemcom.com Tel +33 (0)1 57 61 25 72 Fax +33 (0)1 57 61 38 99

SAGEMCOM BROADBAND SAS eBanenicesiy I rtment sagemicom.com |

250 Route de l'Empereur - 92848 RUEIL MALMAISON CEDEX- FRANCE T C_ ecaration Letter Date: 2022/1/27 FCC ID : VW3FAST5290 To Whom It May Concern:

We, SAGEMCOM BROADBAND SAS, declare that the device supports the TPC function in final F/W when EUT is sold to FCC market. Respectfully, Applicants company name SAGEMCOM BROADBAND SAS Ve)e)i(e-laimemeelanl ey-la\arcle(el gost 250 Route de |Em N CEDEX- FRANCE ws Sagemcom Broad Au Signature 510 RCS NANTERRE Social route de |'Empereur CEDEX NE Taatem-Tale mele Mid (= Jacques LE ROUX R&D Genera Methods Depa Manager Tl. 2 +33 (0)1 57611000 E-Mail jacques.leroux@

Tel +33 (0)1 57 61 25 72 Fax +33 (0)1 57 61 38 99

emco SAGE OMBR_- DB NDSAS I WeCh ne oL 250 Route de IEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE C ass a ge etter Date: 2021/11/22 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Ls<crelB]- 11 me Oa e= S| d= IY Oa Teale (=) FCC ID: VW3FAST5290 / Grant Date: 08/06/2021 Pursuant to CFR 2.1043, SAGEMCOM BROADBAND SAS hereby requests a Class III Permissive Change. Modification:

1. Adding U-Nil 5, UNII 6, UNII 7 and UNII 8 for this device. 2. Antenna Composite Gain report was modified to include 6E operation Note:

1. There is no change in hardware or in existing RF relevant portion 2. Software version Respectfully, Sage co Applicant's company name SAGEMCOM BROADBAND SAS Sagemcom Broadband S.A.S U capital de 58 251 417,36 a 250 Route de lEmpereur - 92848 RUEIL Applicant's company address Bae Se ee a be iz Mee starr tee Tel a EIL-MALMAISON CEDEX F eae Signature 33 (0)1 57 61 1000 and Job Title Jacques LE ROUX / R&D General Methods Department Manager jacques.leroux@sagemcom.com

+33 (0)1 57 61 25 72

+33 (0)1 57 61 38 99 SAGEMCOM- Headauarter: 250 Route de l'Empereur 92848 RUEIL MALMAISON CEDEX - FRANCE lf the software upgrade will be available to devices currently in the field ?

O2L.U/p2 5290 12 20211015 1124

agemcom SAGEMCOM BROADBAND AS S 250 Route de lEmpereur - 92848 RUEIL MALMAISON CEDEX- FRANCE etter of ec arationon ndoor ccess ontO eration Date: 2021-10-26 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID : VW3FAST5290 To Whom It May Concern:

We, SAGEMCOM BROADBAND SAS, attest that this device under FCC ID VW3FAST5290 complies with device protocol requirements and operational restrictions:

1. Protocol attestation statement:

An 11ax IEEE device's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. 2. Statement acknowledging device restrictions:

a. This device is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. c. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Respecifully, Applicants company name SAGEMCOM BROADBAND SAS Applicants company address 250 Route de lEmpereur - 92848 RUEIL MALMAISON CEDEX-

FRANCE Signature Name and Job Title Jacques LE ROUX / R&D General Methods Department Manager ee ET jacques.leroux@sagemcom.com

+33 (0)1 57 61 25 72

+33 (0)1 57 61 38 99 Sagemcom Broadband S.A.S ee CP aaa a PP Te Maas Sidge Social :

250, route de |'Empereur 92848 RUEIL-MALMAISON CEDEX aay e OM- Headquarter: 250 Rouie de I'Empereur 92848 RUEIL LMAISON CEDEX - FRANCE Tl. : +33 (0)1 57611000