`
0 Table of Contents 1. Precaution.. 2 2. Preparation. 4 Components & Accessories... 4 Part Names.. 5 3. Initiate SMC from Mobile Device. 6 Download the SMC App..... 6 Connect to the SMC via Wireless Network.. 6 System Setting via SMC App for iOS 7 System Setting via SMC App for Android 13 4. Initiate SMC from PC... 18 Connect to the SMC... 18 Connect via the Wired.. 18 Connect via the Wireless.. 20 System Setting 22 SkypeTM Setting... 25 5. Operate the SMC...... 26 Connect to Internet via Wired 26 Connect to Internet Wireless..... 26 Standby..... 26 Video Monitor....... 27 8. Appendix. 29 Specification. 29 1 1 Precaution Thank you for purchasing a Monitoring Camera. Please take a moment to read through this manual. Its contents will send you on an educational journey into your recorder multiple capabilities. Before using the SMC, the Monitoring Camera, please ensure that you read and understand the safety precautions described below. Always ensure that the Monitoring Camera is operated correctly. Never operate the Monitoring Camera inside of an aircraft or anywhere else where operation of such devices is restricted. Improper use creates the risk of serious accident. Do not try to open the case of the Monitoring Camera or attempt to modify it in any way. High-voltage internal components create the risk of electric shock when exposed. Maintenance and repairs should be performed only by authorized service providers. Keep the Monitoring Camera away from water and other liquids. Do not use it with wet hands. Never use the Monitoring Camera in the rain or snow. Moisture creates the danger of fire and electric shock. Keep the Monitoring Camera and its accessories out of the reach of children and animals to prevent accidents or damage to the Monitoring Camera. 2 If you notice smoke or a strange odor coming from the Monitoring Camera, turn the power off immediately. Take the Monitoring Camera to the nearest authorized service center for repair. Never attempt to repair the Monitoring Camera on your own. Use only the recommended power accessories. Use of power sources not expressly recommended for the Monitoring Camera may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards. The Monitoring Camera may become slightly warm during use. This does not indicate malfunction. If the exterior of the Monitoring Camera needs cleaning, wipe it with a soft, dry cloth. 3 2. Preparation Components & Accessories Monitoring Camera User Manual Optional Accessories USB Cable USB AC Adaptor 4 Part Name Setup Enter the System Setting mode. Reset Restart Press the Reset key when mini USB cable connected. Default Press the Reset key and hold then plug-in the mini USB cable. 5 3 Initiate SMC from Mobile Device Download the SMC App SMC App is compatible with the iOS 5.0 or above and Android 2.2 or above. 1. Before using the Monitoring Camera, search and download the free App SMC. 2. Press INSTALL APP to install SMC in your mobile device. Connect to the SMC via wireless network 1. Connect the USB AC Adaptor with USB cable to the mini USB Port. (This mini USB port is for power supply only.) 2. The SMC launch automatic when the USB power supplied. 6 System Setting via SMC App (for iOS) 1. Search the SMC icon. 2. Press the SMC icon to launch it. 3. Press Next. 4. Please make sure that you have created a new SkypeTM account for the Monitoring Camera. Press Next if you already have the SkypeTM account for SMC. If not, press Apply new SKYPETM account first to create a new account for SMC. 7 5. Press the Setup key on the bottom of the Monitoring Camera. The red LED will blink after 10 seconds. Wait about 15 seconds until the steady red LED. Then press Next. 6. Find the MAC Address on the Monitoring Camera then press Next. 7. Find the Setting of the iOS and press the WLAN. 8. Search the same MAC Address from the WLAN Setup then select it as the SSID. 8 9. Key-in the password and press Connect. (default password :
1234567890) 10. Make sure the SSID of SMC has connected then press Return. 11. The SMC App show this error message if the SMC SSID connect failed. Please press the Wireless Settings again and repeat step 7 to 10. 12. The SMC SSID has connected correctly. Press Next. 9 13. Press Next. 14. Appoint a wireless SSID which must can connect to the internet for the Monitoring Camera. SMC will scan available wireless SSID and show them under Selection of SSID. Select one of them then press Next. 15. Press the Encryption Mode to select the matched mode. 16. Enter the matched Security Key and confirm it again. Then press Next. 10 17. Configure SkypeTM account of the Monitoring Camera. SMC will use this account to logo in SkypeTM server. 18. Enter SkypeTM account and password and confirm again. 19. Press the Advance which allow you to revise the system status of the Monitoring Camera if needed. Press Back to quit the advance mode. 20. Press the Complete setting to finish SMC setting. 11 21. Press Exit to close SMC App. 12 System Setting via SMC App (for Android) 1. Search the SMC icon. 2. Press the SMC icon to launch it. 3. Press Next. 4. Please make sure that you have created a new SkypeTM account for the Monitoring Camera. Press Next if you already have the SkypeTM account for SMC. If not, press Apply new SKYPETM account first to create a new account for SMC. 13 5. Press the Setup key on the bottom of the Monitoring Camera. The red LED will blink after 10 seconds. Wait about 15 seconds until the steady red LED. Then press Next. 6. Find the MAC Address on the Monitoring Camera then press Next. 7. Search the same MAC Address from the WLAN Setup then select it as the SSID. 8. Key-in the password and press Connect. (default password :
1234567890) 14 9. Make sure the SSID of SMC has connected then press Return. 10. The SMC App show this error message if the SMC SSID connect failed. Please press the Wireless Settings again and repeat step 7 to 9. 11. The SMC SSID has connected correctly. Press Next. 12. Press Next. 15 13. Appoint a Wireless SSID which must can connect to the internet for the Monitoring Camera. SMC will scan available wireless SSID and show them under Selection of SSID. Select one of them then press Next. 14. Press the Encryption Mode to select the matched mode. 15. Enter the matched Security Key and confirm it again. Then press Next. 16. Configure SkypeTM account of the Monitoring Camera. SMC will use this account to logo in SkypeTM server. 16 17. Enter SkypeTM account and password and confirm again. 18. Press the Advance which allow you to revise the system status of the Monitoring Camera if needed. Press Back to quit the advance mode. 19. Press the Complete setting to finish SMC setting. 20. Press Exit to close SMC App. 17 4 Initiate SMC from PC Connect to the SMC - Monitoring Camera Connect via the wired network 1. Connect the RJ45 port of SMC to PC / NB via a network wire. 2. Connect the USB AC Adaptor with USB cable to the mini USB Port. (This mini USB port is for power supply only.) 3. The SMC launch automatic when the USB power supplied. 4. The system will need about 15 seconds to initiate after the LED of RJ45 connecter blinking. 5. Press the Setup button. The Status LED blinking slowly with RED. 6. The status LED stop blinking and illuminate with RED when link with the network. 18 7. Run the Command Prompt and enter ipconfig command to check the network status to confirm the SMC has linked with PC / NB. 19 Connect via the wireless network 1. Connect the USB AC Adaptor with USB cable to the mini USB Port. (This mini USB port is for power supply only.) 2. The SMC launch automatic when the USB power supplied. 3. Press the Setup button. The Status LED blinking slowly with RED. 4. The status LED stop blinking and illuminate with RED when link with the network. 5. Find the MAC Address on the SMC. 6. Search the same MAC Address from the Networks Setup then select it as the SSID of SMC. 20 7. Select the SMC SSID and connect it. 8. Enter the network security key. (default : 1234567880) 9. Confirm SMC has connected with PC / NB. 21 System Setting 1. Open a browser and enter IP address 192.168.1.1 then press enter. 2. Click Admin Login. Key-in admin in the Username (without password) of Admin dialog then press OK. 22 3. The System Setting screen appeared. 4. Select link to internet via Wired then click the check box of Enable Ethernet to enable the wired network. 23 Or select link to internet via Wireless and select valid wireless from the Scan List. Click the check box of Enable Wireless to enable the wireless network. 5. Press the Submit and finish the System Setting. 24 SkypeTM Setting 1. Select General under SkypeTM and enter the SkypeTM Setting. 2. Enter SkypeTM account and password which registered for this Monitoring Camera. 3. Press the Submit and finish the SkypeTM Setting. 4. Press the Reboot and quit. Note: 1. Create a new SkypeTM account from PC / NB before use the Monitoring Camera. 2. Add all contacts who has permitted to login the SkypeTM account of Monitoring Camera. 25 5 Operate the SMC Connect to Internet via Wired Plug-in a network wire to the RJ45 port of the SMC. Connect the other connector of the network wire to a valid internet port. Connect to Internet Wireless Disconnect the network wire from the SMC. Standby 1. Connect the USB AC Adaptor with USB cable to the mini USB Port. (This mini USB port is for power supply only.) 2. The SMC launch automatic when the USB power supplied. 3. The system need about 1 minute to initiate then connect to the internet and logo-in to SkypeTM. Note: The initiation time depend on the network performance and bandwidth. 4. The Status LED illuminate in Green when the SMC has linked to internet and ready for video monitor. 26 Video Monitor 1. Launch the SkypeTM and sing in with the SkypeTM Name and Password which has added in the contact list of the SMC. 2. Click the contact of SMC you want to monitor from the contact list. Then press the Video call button. 27 3. Your video window will appear on the bottom screen. 4. The SMC will answer incoming call automatically and the Status LED blinking with Green. The contact video will appear on the Video 2 screen and your video display on the Video 1 screen. 28 6 Appendix Specification Model No.: SMC-1 1/4, 2M (1600x1200) pixels, CMOS Image Sensor F2.0, f=3.348 mm Lens Fixed Focus Focus Type 60 cm to infinity Focus Range White Balance Auto Exposure Auto Video Encoder H.264 HQ Video Conference HD 720P @ 30fps Audio Input Built-in 2 Microphones Wireless IEEE 802.11b/g/n Ethernet Connection RJ45 SkypeTM App Built-in Software Power DC 5V (via mini USB Port) 90 (W) x 65 (H) x 57 (L) mm Dimension Specifications are subject to change without prior notice. 29 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. BT Device:
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 30 Notice:
1. Users will automatically receive software upgrade notice when logged on to Skype account with your Skype client software on PC or mobile phone Apps. 2. SkypeTM is a trade mark of SkypeTM Limited or its related companies. This product / application has not been approved or endorsed by SkypeTM Limited, SkypeTM Communications S.a.r.l. or any of their related companies. 3. This product includes SkypeKitTM Version [3.7]
Copyright 2003-2013, SkypeTM Limited Patents Pending SkypeTM, associated trade marks and logos are trade marks of SkypeTM Limited. 4. User can logged on to www.sigmadesigns.com for the SMC technical update information. Technical Support:
TEL: 886 2 2792 1512 This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. 31