| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 |
|
Host user manual | Users Manual | 5.01 MiB | May 12 2011 / February 06 2012 | |||
| 1 2 |
|
User manual | Users Manual | 660.28 KiB | ||||
| 1 2 | Cover Letter(s) | May 12 2011 | ||||||
| 1 2 | External Photos | May 12 2011 / February 06 2012 | ||||||
| 1 2 | Cover Letter(s) | May 12 2011 | ||||||
| 1 2 | External Photos | May 12 2011 / February 06 2012 | ||||||
| 1 2 | Internal Photos | May 12 2011 / February 06 2012 | ||||||
| 1 2 | ID Label/Location Info | May 12 2011 | ||||||
| 1 2 | RF Exposure Info | May 12 2011 | ||||||
| 1 2 | Cover Letter(s) | May 12 2011 | ||||||
| 1 2 | Test Report | May 12 2011 | ||||||
| 1 2 | Test Setup Photos | May 12 2011 / February 06 2012 | ||||||
| 1 2 | External Photos | |||||||
| 1 2 | Internal Photos | |||||||
| 1 2 | Cover Letter(s) |
| 1 2 | Host user manual | Users Manual | 5.01 MiB | May 12 2011 / February 06 2012 |
Contents Chapter 1 Getting Started 1 Chapter 1. Getting Started Chapter 3. Chrome OS 3 6 20 23 27 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off 44 What is Google Chrome OS?
45 47 48 49 Using Browser Using the web store Cloud Print (Optional) Recovery (Optional) Chapter 2. Using the Computer Chapter 4. Appendix 30 32 35 36 38 39 40 41 Keyboard Touchpad Multi Card Slot (Optional) Connecting an External Display Device (Optional) Adjusting the Volume Network (Optional) LCD Brightness Control Battery Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements 51 53 55 68 WEEE Symbol Information 69 70 Product Specifi cations Glossary Chapter 1. Getting Started Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off 3 6 20 23 27 Before You Start Chapter 1 Getting Started 3 Before reading the User Guide, fi rst check the following information. Safety Precaution Notations Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may diff er from the actual appearance of the product. This guide decribes procedures for using both the mouse and the touchpad. The User guide supplied with this computer may vary depending on your model. Icon Notation Description Warning Caution Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. Text Notations Icon Notation Description Caution Content included in this section includes information required about the function. Note Content included in this section includes helpful information to use the function. Before You Start Chapter 1 Getting Started 4 Copyright Precautions for Operating System Support 2011 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the consent of Samsung Electronics Co., Ltd. The information in this document is subject to change without notice due to improving the performance of the product. Samsung Electronics shall not be liable for any data loss. Please take care to avoid losing any important data and backup your data to prevent any such data loss. If a problem occurs because of the reinstallation of other operating systems(OS) or a previous version of an OS pre-installed on this computer, or a software that does not support the OS, the company will not provide technical support, a replacement or refund, and if our service engineer visits you due to this problem, a service charge will be applied. Performance Restrictions Online games and some games(3D,2D) may not be supported and Full HD video and some high bit rate HD video playback may be slow and stutter on this computer. Before You Start Chapter 1 Getting Started 5 About the Product Capacity Representation Standard About HDD Capacity Representation The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows, Chrome) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation.
(E.g. For a 80GB HDD, OS(Windows, Chrome, etc.) represents the capacity as 74.5GB, 80x1,000x1,000x1,000 byte/(1,024x1,024x1,024) byte = 74.505GB) About Memory Capacity Representation The memory capacity reported in the OS(Windows, Chrome, etc.) is less than the actual capacity of memory. This is because BIOS or a video adapter uses a portion of memory or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, OS(Windows, Chrome, etc.) may report the capacity as 1,022MB or less) Safety Precautions Chapter 1 Getting Started 6 For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may differ from actual products. Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Do not install the product in places exposed to humidity such as a bathrooms. There is a danger of electric shock. Use the product within the operating conditions specified in the Manufacturers User Guide. Keep the plastic bags out of the reach of children. There is a danger of suffocation. Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them. This may increase the internal temperature of the computer and may cause an injury. Do not install the computer on a slant or a place prone to vibrations, or avoid using the computer in that location for a long time. This increases the risk that a malfunction or damage to the product will occur. Avoid exposing any part of your body to the heat from the computer vent or AC adapter for a long time when the computer is on. Exposing a part of your body close to the heat from the vent or AC adapter for long periods of time may cause a burn. Avoid blocking the vent at the bottom or side of the computer when using it on a bed or cushion. If the vent is blocked, there is a danger of damaging the computer or overheating the inside of the computer. NB Ver 2.8 Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet fi gures may diff er depending on the country specifi cations and the product model. Do not touch the main plug or power cord with wet hands. There is a danger of electric shock. Do not exceed the standard capacity
(voltage/current) of a multiplug or power outlet extension when using it for the product. There is a danger of electric shock or fi re hazard. Chapter 1 Getting Started 7 If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center. There is a danger of electric shock or fi re hazard. Do not use a damaged or loose main plug or power cord or power outlet. There is a danger of electric shock or fi re hazard. Plug the power cord fi rmly into the power outlet and AC adapter. Failing to do so may cause fi re hazard. Do not unplug the power cord out by pulling the cable only. If the cord is damaged, it may cause electric shock. Do not bend the power cord excessively or do not place a heavy object over the power cord. It is especially important to keep the power cord out of reach of infants and pets. If the cord is damaged, it may cause electric shock or fi re. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failing to do so may result in electric shock. If water or another substance enters the power input jack, AC adapter or the computer, disconnect the power cord and contact the service center. If the notebook computer has an external type (removable) battery, separate the battery also. Damage to the device within the computer may cause electric shock or fire hazard. Keep the power cord or outlet clean so that they are not covered with dust. Failing to do so may result in fire. Chapter 1 Getting Started 8 AC Adapter Usage Precautions Connect the power cord to the AC adapter firmly. Otherwise, there is a danger of fire due to an incomplete contact. Use only the AC adapter supplied with the product. Using another adapter may cause the screen to flicker. Do not place heavy objects or step onto the power cord or AC adapter to avoid damaging the power cord or AC adapter. If the cord is damaged, there is a danger of electric shock or fire. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics. Unauthorized batteries and adapters may not meet the proper safety requirements and may cause problems or malfunctions and result in an explosion or fire. Chapter 1 Getting Started 9 Do not use the computer in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do not use it in a location such as room with floor heating as it may cause the computer to overheat. Take care that the computer vents (on the side or the bottom) are not blocked especially in these environments. If the vents are blocked, the computer may overheat and it may cause a computer problem, or even an explosion. Do not use the computer in a humid location such as a bathroom or sauna. Please use the computer within the recommended temperature and humidity range (10~32C, 20~80% RH). Do not close the LCD panel and put the computer into your bag to move it when it is still turned on. If you put the computer into your bag without turning it off, the computer may overheat and there is a danger of fire. Shut the computer down properly before moving it. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1 Getting Started 10 Cutting the power from the internal battery
(for corresponding models only.) Never heat the product(or battery) or put the product(or battery) into a fire. Do not put or use the product(or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire. Take care not to allow metal objects such as a key or clip to touch the battery terminal
(metal parts). If a metal object touches the battery terminals, it may cause excessive current flow and it may damage the battery, or result in a fire. If liquid leaks out of the product(or battery) or there is a funny smell coming from the product(or battery), remove the product(or battery) the computer and contact a service center. There is a danger of an explosion or fire. To use the computer safely, replace a dead battery with a new, authorized battery. For products with built-in batteries, customers cannot remove the battery. In the case of flooding, lightning or explosions, you can cut the battery power by inserting an object such as a paper clip into the [Emergency Hole] at the bottom of the computer. Disconnect the AC adapter and insert an object such as a paper clip into the hole at the bottom of the computer to cut the battery power. In the case of flooding, lightning or explosions, cut the battery power, do not reconnect the AC adapter, and immediately contact Samsung Electronics so that the appropriate countermeasures can be taken. Thereafter, if you connect the AC adapter, the battery power will be supplied again. Do not cut the battery power under normal conditions. This may result in data loss or a product malfunction. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Usage Related Disconnect all cables connected to the computer before cleaning it. If your notebook is external & removable battery type, remove the external battery. There is a danger of electric shock or damage to the product. Do not connect a phone line connected to a digital phone to the modem. There is a danger of a electric shock, fire or damage to the product. Do not place any container filled with water or chemicals over or near the computer. If water or chemicals enter the computer, this may cause fire or electric shock. Chapter 1 Getting Started 11 If the computer is broken or dropped, disconnect the power cord and contact a service center for a safety check. If the notebook computer has an external type (removable) battery, separate the battery also. Using a broken computer may cause electric shock or fire hazard. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a fire hazard. The computer may overheat and also present opportunity to thieves. Do not use your notebook PC for long periods of time while any part of your body is making direct contact with it. The temperature of the product may increase during normal operation. This may result in harming or burning your skin. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Upgrade Related Chapter 1 Getting Started 12 Shut down the computer and disconnect all cables before disassembling the computer. If there is a modem, disconnect the phone line. If your notebook is external
& removable battery type, remove the external battery. Failing to do so, may cause electric shock. Never disassemble the power supply or AC adapter. There is a danger of electric shock. When removing the RTC (Real Time Clock) battery, keep it out of the reach of children as they could touch and/or swallow it. There is a danger of choking. If a child has swallowed it, contact a doctor immediately. Use only authorized parts (multi-
plug, battery and memory) and never disassemble parts. There is a danger of damaging the product, electric shock or fire hazard. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Security and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device
(wireless LAN, Bluetooth, etc.). Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. The airport security devices that check carry-on luggage, such as conveyor belts, use x-rays instead of magnetism and will not damage a drive. Chapter 1 Getting Started 13 When carrying the notebook computer with other items, such as the adapter, mouse, books etc, take care not to press anything against the notebook computer. If a heavy object is pressed against the notebook computer, a white spot or stain may appear on the LCD. Therefore, take care not to apply any pressure to the notebook. In this case, place the notebook computer in a separate compartment away from the other objects. Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire. When using the computer with it lying on its side, place it so that the vents face upwards. Failure to do so, may cause the internal temperature of the computer to rise and the computer to malfunction or halt. Do not place a heavy object over the product. This may cause a problem with the computer. In addition, the object may fall and cause injury, or damage the computer. Chapter 1 Getting Started 14 Battery Usage Related Dispose of worn-out batteries properly. There is a danger of fire or explosion. The battery disposal method may differ depending on your country and region. Dispose of the used battery in an appropriate way. Do not throw or disassemble the battery and do not put it into water. This may cause an injury, fire or explosion. Use only a battery authorized by Samsung Electronics. Failure to do so may cause an explosion. Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery. Contact with a metal may cause excessive current and a high temperature and may damage the battery or cause a fire. Charge the battery according to the instructions in the manual. Failure to do so, may cause an explosion or fire from damage to the product. Do not heat the product(or battery) or expose it to heat (e.g. inside a vehicle during the summer). There is a danger of explosion or fire. Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Failure to do so may cause electric shock hazard. Make sure to have the product tested by a safety service engineer after repairing the product. Authorized Samsung Repair Centers will carry out safety checks after a repair. Using a repaired product without testing it for safety may cause an electric shock or fire. In case of lightning, immediately turn the system off, disconnect the power cord from the wall outlet and phone line from modem. Do not use a modem or phone. There is a danger of electric shock or fire. Do not use your computer and AC-Adapter on your lap or soft surfaces. If the computer temperature increases, there is a danger of burning yourself. Chapter 1 Getting Started 15 Connect only permitted devices to the connectors or ports of the computer. Failure to do so, may cause electric shock and fire. Close the LCD panel only after checking if the notebook computer is turned off. The temperature may rise and it may cause overheating and deformation of the product. Do not press the Eject Button while the Floppy Disk/CD-ROM drive is in operation. You might lose data and the disk might be suddenly ejected and could cause an injury. Take care not to drop the product while using it. This may cause personal injury or loss of data. Do not touch the antenna with electricity facility such as the power outlet. There is a danger of electric shock. When handling computer parts, follow the instructions on the manual supplied with the parts. Failure to do so, may cause damage to the product. Chapter 1 Getting Started 16 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. It may damage the disc and cause disorder of device and injury of user. Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately. If your notebook is external &
removable battery type, remove the external battery. There is a danger of fire. Do not use a damaged or modified CD/Floppy Disk. There is a danger of damaging the product or personal injury. Do not insert your fingers into the PC Card Slot. There is a danger of injury or electric shock. Use recommended computer cleansing solution when cleaning the product and only use the computer when it is completely dried. Failure to do so may cause electric shock or fire. Emergency disk eject method using paperclip should not be used while the disk is in motion. Make sure to use the emergency disk eject method only when the Optical Disk Drive has stopped. There is a danger of injury. Chapter 1 Getting Started 17 Security and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables. For long periods of not using the notebook computer, discharge the battery and preserve as it is detached.
(For external & removable battery type) The battery will be preserved at its best condition. Do not operate or watch the computer while driving a vehicle. There is a danger of a traffic accident. Please concentrate on driving. Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. The device may be damaged or you may be injured. Take care not to throw or drop a computer part or device. This may cause injury or damage to the product. Make sure to close the computer cover before connecting the power after a reassembly. There is a danger of electric shock if your body touches an internal part. Use parts authorized by Samsung Electronics only. Failure to do so, may cause fire or damage the product. Never disassemble or repair the product by yourself. There is a danger of electric shock or fire. To connect a device that is not manufactured or authorized by Samsung Electronics, enquire at your service center before connecting the device. There is a danger of damaging the product. Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss
(Hard Disk(HDD/SSD) Management) Take care not to damage the data on a hard disk drive. A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk. Take extra care, because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive. The company is not liable for any loss of data on the hard disk drive. Chapter 1 Getting Started 18 Causes that may damage the data of a hard disk drive and the hard disk drive itself. The data may be lost when an external impact is applied to the disk while disassembling or assembling the computer. The data may be lost when the computer is turned off or reset by a power failure while the hard disk drive is operating. The data may be lost and irrecoverable due to a computer virus infection. The data may be lost if the power is turned off while running a program. Sudden impact or movement to the computer while the hard disk drive is operating, may cause files to be corrupted or bad sectors on the hard disk. To prevent data loss due to damage to the hard disk drive, please backup your data frequently. Safety Precautions Chapter 1 Getting Started 19 Using the power supply in an airplane When using the auto adapter Since the power outlet type diff ers depending on the type of airplane, connect the power appropriately. When using the AC power plug When the cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Connect the power plug pins perpendicular into the center of the power outlet. If the plug pins are not inserted into the center of the holes, the plug pins are only inserted up to half their length. In this case, reconnect the power plug. You have to insert the power plug into the outlet when the power indicator (LED) of the power outlet is lit green. If the power is connected properly, the power indicator (LED) remains green. Otherwise, the power indicator (LED) is turned off . In this case, unplug the power, check if the power indicator (LED) is green, and then reconnect the power plug. Power Indicator
(LED) Center Holes Auto Adapter DC Plug Cigar Plug In-fl ight Cigar Socket When using the Airplane Charging Converter Depending on the airplane, you have to use the auto adapter and charging converter. Connect the airplane charging converter
(optional) to the auto adapter (optional) and then insert the airplane power input jack into the power outlet. Charging Converter 1 Connect this end to the auto adapter. 220V Power Plug 110V Power Plug Good Example Wrong Example Connect the airplane power input jack to the power outlet of the airplane. 2 Proper Posture During Computer Use Chapter 1 Getting Started 20 Maintaining a proper posture during computer use is very important to prevent physical harm. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious physical harm may be caused. The instructions in this manual have been prepared so that they can be applied within the coverage of general users. If the user is not included in the coverage, the recommendation is to be applied according to the users needs. Do not use the computer while you are lying down, but only while you are sitting down. Do not use the computer on your lap. If the computer temperature increases, there is a danger of burning yourself. Work while keeping your waist straight. Use a chair with a comfortable back. Keep the center of your leg weight not on the chair but on your feet when you are sitting on a chair. To use the computer while talking over the telephone, use a headset. Using the computer with the phone on your shoulder is bad for posture. Keep frequently used items within a comfortable work range
(where you can reach them with your hands). Proper Posture Adjust the heights of desks and chairs appropriate to your height. The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair. Adjust the height of chair so that your heel is comfortably placed on the fl oor. Proper Posture During Computer Use Chapter 1 Getting Started 21 Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the fi gure. Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. Avoid setting the monitor and LCD excessively bright. Keep the monitor and LCD screen clean. If you wear glasses, clean them before using the computer. When entering contents printed on a paper into the computer, use a static paper holder so that the height of the paper is almost equal to that of the monitor. Keep the line from your elbow to your hand straight. Do not place your palm over the keyboard while typing. Do not hold the mouse with excessive force. Do not press the keyboard, touchpad or mouse with excessive force. It is recommended connecting an external keyboard and mouse when using the computer for long periods of time. Proper Posture During Computer Use Chapter 1 Getting Started 22 Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume fi rst to listen to music. Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. Indirect illumination is recommended. Use a curtain to prevent refl ection on the LCD screen. Operation Condition Do not use the computer in hot and humid locations. Use the computer within the allowed temperature and humidity range specifi ed in the User Guide. Check your volume!
Check if the volume is too loud before using headphones. It is not recommended using headphones for long periods of time. Any deviation from the equalizer default setting could cause hearing impairment. The default setting can be changed through software and driver updates without your intervention. Please check the equalizer default setting before fi rst usage. Overview Front View Chapter 1 Getting Started 23 The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may diff er from the actual appearance of the product depending on the model. The actual color and appearance of the computer may diff er from the pictures used in this guide. 1 Illumination Sensor This sensor detects the ambient illumination around the PC. When the ambient illumination decreases, the LCD backlight is automatically set to low. Conversely, if the ambient illumination increases, the LCD backlight is automatically set to high. 1 8 2 3 4 5 6 7 2 Camera (Optional) Using this camera, you can take still pictures and record video. 3 Microphone
(Optional) You can use the built-in microphone. 4 LCD The screen images are displayed here. 5 Power Button Turns the computer on or off . 6 Keyboard A device to enter data by pressing the keys. Touchpad/
Touchpad Buttons The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons. Multi Card Slot
(Optional) A card slot that supports SD card, SDHC card, MMC card and SDXC card. 7 8 Overview Right View Chapter 1 Getting Started 24 1 Switch User Mode You can change the user mode. Left Side : Normal Mode Right Side : Developer Mode Please note that the Chrome notebook can be initialized if you switch the user mode. For more information refer to the Chrome OS help. 2 SIM Card Slot
(Optional) 3 USB Port This slot is for SIM cards. You can connect USB devices to the USB port such as a keyboard/mouse. 3 1 2 Overview Left View 21 3 6 4 5 Chapter 1 Getting Started 25 This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. Red: When the battery is being charged. Off: When the computer is running on battery power without being connected to AC adapter. Status Indicators 1 2 DC Jack A jack to connect the AC adapter that supplies power to the computer. 3 Fan Vents 4 Monitor Port
(Optional) 5 USB Port 6 Earset / headset Jack The internal heat of the computer is emitted through these holes. If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. You can connect an external device by connecting a VGA adapter only that comes with the product. You can connect USB devices to the USB port such as a keyboard/mouse. This is the jack for connecting an earset or headset. Overview Bottom View Chapter 1 Getting Started 26 1 Recovery Hole 1 2 2 Emergency Hole This is the hole for the recovery function. For more information, refer to the Recovery section. This is the hole that allows you to cut-off the power. If you insert an unfolded paper clip into the hole and push it in, the power from the battery is cut off. For more information, refer to the Cutting the power from the internal battery section of the Safety Precautions. Turning the Computer On and Off Chapter 1 Getting Started 27 Turning the computer on 1 Connect the AC adapter. 2 If you open the LCD panel, the computer is automatically turned on. If the LCD panel is already opened, press the power button. Entering Sleep mode Closes the LCD panel. Adjusting the screen brightness Adjust the LCD brightness by pressing the key or the key. 3 Power button LED is lit while the computer is turned on. Power Button LED LED This shows the computer operating status. On: When the computer is operating. Blinks: When the computer is in Sleep mode. Turning the Computer On and Off Chapter 1 Getting Started 28 Turning the computer off If you press and hold the power button for 2 seconds, the system turns into the screen lock mode and if you hold it for another 2 seconds, the power is turned off. When the system is frozen, press and hold down the power button for at least 8 seconds to shutdown the computer. Chapter 2. Using the computer Keyboard Touchpad Multi Card Slot (Optional) 30 32 35 Connecting an External Display Device (Optional) 36 Adjusting the Volume Network (Optional) LCD Brightness Control Battery 38 39 40 41 Keyboard Chapter 2 Using the computer 30 Shortcut key functions and procedures are discussed in the following sections. The keyboard image may diff er from the actual keyboard. The keyboard may diff er depending on your country. The following mainly describes the shortcut keys. Shortcut Keys You can use the functions described in the table below by pressing the shortcut keys. Shortcut Keys Name Function Previous page Turns back to the previous page. Next page Goes forward to the next page. Refresh Refresh the current web page. Full screen mode Displays the web page in full screen mode. To exit full screen mode, simply press the Full screen button again or click Exit full screen button, which pops up when you move a cursor to the top of a screen. Keyboard Chapter 2 Using the computer 31 Shortcut Keys Name Function Switch windows Switches between Windows. Screen Brightness Control Control the screen brightness. Mute Mutes the sound. In Mute mode, press the key to cancel the Mute function. Volume control Controls the volume. Shift key Hold the Shift key down to enter upper case letters. Touchpad Chapter 2 Using the computer 32 The touchpad provides the same function as a mouse, and the touchpad button plays the role of the left mouse button. Basic Touchpad Functions Use the Touchpad with your fi ngers. Using a sharp object may damage the Touchpad. The pictures in this manual may diff er from the actual screenshots and the appearance of the touchpad may diff er depending on the model. Moving the cursor on the screen Place your fi nger on the touchpad slightly and move your fi nger. The mouse cursor will move accordingly. Move your fi nger in the direction you wish to move the cursor. Touch Area Use to move the cursor. Touchpad Button You can select or run a program using this button. Touchpad Click Function Chapter 2 Using the computer 33 Right Button Function Place a fi nger on the touchpad and click an item once. Alternatively, briefl y press the touchpad button once. This corresponds to clicking the right mouse button. Tap the touchpad with two fi ngers simultaneously. Tap or Click Tap or Click Double-Click Function Drag Function Put your fi nger on the touchpad and quickly tap twice with your fi nger on an item you want. Alternatively, briefl y press the touchpad button twice. Dragging refers to moving an item to another place after selecting it. To drag an item to a new location, press and hold the touchpad button over an item and drag it to the new location. TapTap or ClickClick While holding the touchpad button down Move Touchpad The Scroll Function This function is the same as the scroll area of the Touchpad. If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right accordingly. or Chapter 2 Using the computer 34 Setting the Touchpad Sensitivity When the touchpad is too sensitive, adjust the touchpad sensitivity. To set the touchpad sensitivity Select the Sensitivity in the required level.
> Settings > System > Touchpad to Multi Card Slot (Optional) Chapter 2 Using the computer 35 Using the multi card slot, you can read and write data to a SD card, SDHC card, MMC card, SDXC card. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc.. Using the card 1 Insert a card into the slot according to the directions printed on the slot. Supported Cards : SD Card, SDHC card, MMC card, SDXC card You have to additionally purchase a multi card with the necessary capacity depending on your requirements. You can use a multi card just like any data storage device. A copyright protection function is not supported. Since you can lose a card when moving the computer, keep the card separately. The fi gures used for the description are of a representative model. Therefore the fi gures may diff er from the real ones. If a slot protection dummy card is inserted into your computer, remove the dummy card before using the computer. Example) SD Card Using a Mini SD and RS-MMC Since the above cards are too small, you cannot insert the cards into the slot directly. Insert the card into the dedicated adapter (available from most electronic retailers) and then insert the adapter into the multi card slot. However, depending on the adapters body material, some RS-MMC cards may not be recognized properly. Samsung recommend that you check the card is recognized correctly prior to purchasing. To remove a memory card Push the card in the slot lightly. Then the card pops up. Eject the card. Connecting an External Display Device (Optional) Chapter 2 Using the computer 36 If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. About the connection cable Users should additionally purchase the necessary connection cables. Before you start, check the port and cable of the external display device and then connect the display device to the computer. Analog Monitor (RGB) Cable VGA Adapter (Optional) Connecting an External Display Device (Optional) Chapter 2 Using the computer 37 If the connected external display device is blank, reconnect the cable. Connecting to the monitor port You can experience a wider screen by connecting the computer to a monitor, TV or projector with a monitor port. You can give better presentations by connecting the computer to a projector. 1 Connect the VGA adapter to the monitor port of the computer. External Monitor TV Projector z VGA Adapter xx 2 Connect the VGA cable (15-pin) to the connected VGA adapter and then connect the other end of the VGA cable to the VGA port of the monitor or the TV. 3 Connect the power cord of the connected monitor, TV or projector and turn the power on. Now you can use the computer connecting to an external display device. Chapter 2 Using the computer 38 Adjusting the Volume You can adjust the volume using the keyboard. Adjusting the Volume using the Keyboard Or Alternatively, press the key to turn the volume off. In Mute mode, press the function. key to cancel the Mute Network (Optional) Chapter 2 Using the computer 39 Connecting to a Wireless LAN Connection to a Wired LAN If there is an AP nearby, you can easily connect to the network. 1 Click the network icon available APs. at the top right to view the list of To connect to a wired LAN, use the USB Ethernet adapter. For more information, refer to the Google Chrome OS Help. To connect to a wired LAN, you need to purchase USB Ethernet adapter additionally. AP List 2 Click over an AP that you want to connect to the wireless network. LCD Brightness Control You can control the LCD brightness. Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the key or the key. Whenever you press the by one level. key, the LCD brightness increases Chapter 2 Using the computer 40 LCD bad pixels principle of laptop computer Samsung observes the specifi cations regarding strict quality and reliability of LCD. But in spite of that, it is inevitable that there might be a small number of bad pixels. A large number of bad pixels can cause problems in appearance, but a small number of pixels doesnt aff ect the computer performance. Therefore Samsung observes and manages the following dot principles:
- Bright dot : 2 or less
- Black dot : 4 or less
- Combination of Bright and Dark : 4 or less Instructions for Cleaning the LCD Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent moving in one direction. Cleaning the LCD panel with excessive force can damage the LCD. Battery Chapter 2 Using the computer 41 Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer is equipped with an internal battery. Before using your computer for the fi rst time after purchasing it, charge the battery completely. Precautions Users cannot remove or replace the internal battery. To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service. Use only chargers specifi ed in the User Manual. Never heat the battery pack, put it near or in a fi re or use at a temperature higher than 60C, as this may cause fi re. Please refer to the system operation environment of this manual and operate and store the battery at room temperature. Charging the Battery 1 An internal battery is embedded. Connect the AC adapter to the power input jack of the computer. The battery will start charging. 2 When charging is complete, the Charge LED turns green. Status Charging Charging complete AC adapter not connected Charge LED Red Green Off The location of the internal battery Battery Chapter 2 Using the computer 42 Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. Separate the AC adapter and move the mouse pointer over the battery icon at the top right to view the remaining battery charge. Battery Usage Time Information A battery is an expendable supply, so when using it over a long time, the capacity/battery life is shortened. If the battery life is reduced to under half of its initial time, we recommend purchasing a new battery. When not using the battery for a long time, store the battery after charging it to 30-40% of its capacity. This extends the battery life time. Chapter 3. Chrome OS What is Google Chrome OS?
Using Browser Using the web store Cloud Print (Optional) Recovery (Optional) 44 45 47 48 49 What is Google Chrome OS?
Chapter 3 Chrome OS 44 A Samsung Chrome notebook has been optimized for the Internet and web-based applications so that you can enjoy surfi ng the Internet easier and quicker. Using web-based applications provided by Google, you also can work on documents, presentations and spreadsheets. Usage Precautions Some functions and screenshots are subject to change depending on the Chrome version. You can use Chrome notebook when the computer is connected to a network. To sign-in, you need a Google account. If you do not have a Google account, you can connect with a guest account. In this case, some of the functions may not be available. Chrome notebook includes device drivers. No additional driver installation is not required. Chrome notebook can be updated to the latest version without the agreement of the user. For more information on how to use Chrome notebook, refer to
> Help. Chrome notebook has been designed for Chrome. If you change the operating system or install unsupported software, the company is not liable for technical support, refund or product exchange,and a Customer Service fee will be charged. Using Browser 1 8 2 9 3 4 5 7 6 Chapter 3 Chrome OS 45 Icon Menu Function Tab You can open a new page. New Tab Click to open a new Tab. Time Network Battery The current time is displayed. The current time is displayed. When the network is connected:
When the network is not connected:
Shows the remaining battery charge. Back Click to go back, hold to see history. Forward Click to go forward, hold to see history. Refresh Address line Add a Bookmark Help Center
(Optional) Report an Issue
(Optional) Settings Click to reload the current page. This shows the URL address of the current page. You can enter a website URL here to open it. Click to bookmark this page. If you bookmark a webpage, you can visit frequently visited pages quicker and easier. Click to open the Chrome OS help page. You can view detailed information on how to use the Chrome OS. Please report any feedback or suggestions for how we can improve Chrome OS for you. You can customize and control Chrome OS. 13 12 11 10 1 2 3 4 5 6 7 8 9 10 11 12 13 Using Browser Searching the web The Chrome notebook provides multiple search methods that enable users to search the web more quickly. Using the Search button Chapter 3 Chrome OS 46 Refreshing the screen Press the Refresh Button on the keyboard. on the keyboard, a If you press the Search button new tab opens. 1 2 Enter a keyword to search for in the address box and press 3 The search result will be displayed on the screen. Enter. For information on how to use the right-click, paste and search, and select and drag functions, refer to the Chrome OS Help Center. Using the web store Chapter 3 Chrome OS 47 Chrome provides the Chrome web store where users can purchase Apps, Extensions and Chrome browser themes. Using the web store To use the Web Store, you must have the latest version of the Chrome browser installed. Some items purchased from the Web Store may not work depending on your computer specifi cations. Apps : These are applications that can be executed on a browser. For example, users can install and use Apps for purposes such as writing emails, editing documents, playing music and editing photos. Extensions : These are extended functions that you can use regardless of the website. For example, you can use a post-
it or play a game while surfi ng the Internet. Themes : These are images for the browser background. You have to install an App or Extension that is supported by the Chrome OS to use it. Before downloading it, check if it is supported by the operating system. 1 Click the Web Store icon 2 Click the item you want to buy in the web store. 3 Click the Install button. 4 The installation is completed. App, the installed App appears in a If you have installed an list in a new tab. Extension, the icon of the installed If you have installed an Extension appears in the toolbar at the top of the browser. If you have installed a applied to the background of the browser. Theme, the selected theme is Cloud Print (Optional) Chapter 3 Chrome OS 48 Chrome notebook provides the Google Cloud Print printing service. By connecting your printer to the Google Cloud, you can print to your printer from any computer. You do not need to directly connect a printer to a notebook computer or install a printer driver to print to your printer. When you set up the service for the fi rst time, you need to install the printer driver on the computer that is running Windows and is connected to the printer. You can use the computer connected to the printer under Windows XP/Vista/7. For more information on supported operating systems, refer to the Chrome OS Help. Recovery (Optional) Chapter 3 Chrome OS 49 Using the Recovery function, you can restore your computer when a problem occurs with your computer. You can restore your computer after creating an update image and using a USB fl ash drive. For more information, refer to the Chrome OS Help. Performing the update from a USB fl ash drive 1 Save the recovery image to be updated onto the USB fl ash drive. For the procedures to save a recovery image onto the USB fl ash drive, refer to the Chrome OS Help. power off . 2 Open the LCD panel and press the power button to turn the 3 Insert the USB fl ash drive into the USB port. (3-1)Unfold a paper clip and insert it into the hole at the top left at the back and (3-2)hold it while turning the power on. If you complete the update according to the instructions on the screen, the system restarts. 4 5 Remove the USB fl ash drive. 6 When the system has restarted, the update is successfully completed. Chapter 4. Appendix Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Product Specifi cations Glossary 51 53 55 68 69 70 Important Safety Information Chapter 4 Appendix 51 Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system. Setting Up your System Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. Do not use this product near water or a heat source such as a radiator. Set up the system on a stable work surface. The product should be operated only with the type of power source indicated on the rating label. Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fi re or short circuit. If your computer has a voltage selector switch, make sure that the switch is in the proper position for your area. Openings in the computer case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the computer ventilation openings. Ensure that the fan vents on the bottom of the casing are clear at all times. Do not place the computer on a soft surface, doing so will block the bottom vents. If you use an extension cord with this system, make sure that the total power rating on the products plugged into the extension cord does not exceed the extension cord power rating. For Notebooks with glossy display bezels the user should consider the placement of the Notebook as the bezel may cause disturbing refl ections from surrounding light and bright surfaces. Important Safety Information Chapter 4 Appendix 52 Care During Use The Instruction On Safety Operation of NotePC Do not walk on the power cord or allow anything to rest on it. Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer. 1. When installing and operating devices please refer to safety requirements in the user guide. 2. Devices can be used only with the equipment specified in the technical specifications of the devices. 3. If any smell of burning or smoke is detected from the computer the unit should be switched off and battery removed. The unit should be checked by a qualified technician before reuse. Dispose of batteries according to the manufacturers 4. Service and repair of devices should be carried out by authorized service centers. 5. Do not allow your portable computer to operate with the base resting directly on exposed skin for extended periods of time. The surface temperature of the base will rise during normal operation (particularly when AC Power is present). Allowing sustained contact with exposed skin can cause discomfort or eventually a burn. instructions. If the CMOS battery requires replacement insure that a qualified technician performs the task. When the computer is turned off, a small amount of electrical current still flows through the computer. To avoid electrical shock, always unplug all power cables, remove the battery and modem cables from the wall outlets before cleaning the system. Unplug the system from the wall outlet and refer servicing to qualified personnel if:
The power cord or plug is damaged. Liquid has been spilled into the system. The system does not operate properly when the operating instructions are followed. The system was dropped or the casing is damaged. The system performance changes. Replacement Parts and Accessories Chapter 4 Appendix 53 Use only replacement parts and accessories recommended by manufacturer. Laser Safety To reduce the risk of fi re, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classifi ed as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas. All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 60825-1. The laser devices in these components are classifi ed as Class 1 Laser Products under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact an authorized service location. Battery Disposal Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries. THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Laser Safety Note:
Use of controls or adjustments or performance of procedures other than those specifi ed in this manual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD drive. Class 1M laser radiation when operating part is open. Do not view directly with optical instruments. Class 3B invisible laser radiation when open. Avoid exposure to the beam. Replacement Parts and Accessories Chapter 4 Appendix 54 Connecting and Disconnecting the AC adapter General Requirements The socket-outlet should be installed near the equipment and should be easily accessible. Do not unplug the power cord by only pulling the cable. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requirements, contact your authorized dealer, reseller, or service provider. The requirements listed below are applicable to all countries:
All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used. The power cord set must have a minimum current capacity of 7 A and a nominal voltage rating of 125 or 250 volts AC, as required by each countrys power system. (USA ONLY) The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C7 (or C5) connector, for mating with appliance inlet on the computer. Regulatory Compliance Statements Chapter 4 Appendix 55 Wireless Guidance
(If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed on the next page:
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11ABGN (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication. In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Regulatory Compliance Statements Chapter 4 Appendix 56 Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments:
The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Intel could void the users authority to operate this device. Regulatory Compliance Statements Chapter 4 Appendix 57 Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: Something About Interference. This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15
(If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. Regulatory Compliance Statements Chapter 4 Appendix 58 This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. FCC Part 68 (If fitted with a modem device.) This equipment compiles with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following USOC jacks : RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details. The REN is used to determine the quantity of devices which may be connected to telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact the local telephone company to determine the maximum REN for the calling area. If the terminal equipment causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. Regulatory Compliance Statements Chapter 4 Appendix 59 The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment (Modem) for repair or warranty information, please contact your local distributor. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product. No repairs may be done by the customer. This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be any number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax machine, refer to your communications software user manual. Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limitesapplicables aux appareils numriques de Classe B prescrites dans le rglement sur le brouillage radiolectrique dict par Industrie Canada. Intentional Emitter per RSS 210 This device complies with RSS 210 of Industry Canada. Operation is subject to the following two onditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit tre prt accepter tout brouillage Regulatory Compliance Statements Chapter 4 Appendix 60 radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term IC before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant lobjet dune licence, il doit etre utilize a linterieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne demission) est installe a lexterieur, il doit faire lobjet dune licence.
(If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label. When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. The power output of the wireless device (or devices), which may be embedded in your notebook, is well below the RF exposure limits as set by Industry Canada. Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. To prevent radio interference to licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. Regulatory Compliance Statements Chapter 4 Appendix 61 To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. Telecommunications per DOC notice
(for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the users satisfaction. Before installing this equipment, users should make sure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should make sure, for their own protection, that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Regulatory Compliance Statements Chapter 4 Appendix 62 Brazil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. European Union European Directives This Information Technology Equipment has been tested and found to comply with the following European directives:
EMC Directive 2004/108/EC Low Voltage Directive 2006/95/EC R&TTE Directive 1999/5/EC European Union CE Marking and Compliance Notices Manufacturer Information Products intended for sale within the European Union are marked with the Conformit Europene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark
. Samsung Electronics Co., Ltd. 416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, 443-742, Korea Samsung Electronics Suzhou Computer Co., Ltd. No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province, 215021, China Tel: +86-512-6253-8988 For the web or the phone number of Samsung Service Centre, see the Warranty or contact the retailer where you purchased your product. Regulatory Compliance Statements Chapter 4 Appendix 63 European Radio Approval Information
(for products fi tted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or offi ce use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualifi ed for use in the European Union or associated areas if a CE mark with a Notifi ed Body Registration Number and the Alert Symbol is on the system label. The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R&TTE directive. The low band 5.15 - 5.35 GHz is for indoor use only. See 802.11b and 802.11g restrictions for specifi c countries or regions within countries under the heading European Economic Area Restrictions below. EU R&TTE Compliance Statements esky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
Samsung tmto prohlauje, e tento Notebook PC je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede Samsung erklrer herved, at flgende udstyr Notebook PC overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt Samsung, dass sich das Gert Notebook PC in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befi ndet. Kesolevaga kinnitab Samsung seadme Notebook PC vastavust direktiivi 1999/5/
E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, Samsung, declares that this Notebook PC is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente Samsung declara que el Notebook PC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Regulatory Compliance Statements Chapter 4 Appendix 64
[Greek]
Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
Samsung Notebook PC 1999/5/. Par la prsente Samsung dclare que lappareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente Samsung dichiara che questo Notebook PC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o Samsung deklar, ka Notebook PC atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi
[Lithuanian]
iuo Samsung deklaruoja, kad is Notebook PC atitinka esminius reikalavimus ir kitas 1999/5/
EB Direktyvos nuostatas. Nederlands
[Dutch]
Hierbij verklaart Samsung dat het toestel Notebook PC in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti
[Maltese]
Hawnhekk, Samsung, jiddikjara li dan Notebook PC jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fi d-Dirrettiva 1999/5/EC. Magyar
[Hungarian]
Alulrott, Samsung nyilatkozom, hogy a Notebook PC megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski
[Polish]
Niniejszym Samsung owiadcza, e Notebook PC jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus
[Portuguese]
Samsung declara que este Notebook PC est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko
[Slovenian]
Samsung izjavlja, da je ta Notebook PC v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky
[Slovak]
Samsung tmto vyhlasuje, e Notebook PC spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi
[Finnish]
Svenska
[Swedish]
Samsung vakuuttaa tten ett Notebook PC tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar Samsung att denna Notebook PC str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/
EG. Regulatory Compliance Statements Chapter 4 Appendix 65 slenska
[Icelandic]
Hr me lsir Samsung yfi r v a Notebook PC er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 1999/5/EC. Norsk
[Norwegian]
Samsung erklrer herved at utstyret Notebook PC er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. Trkiye
[Trke]
Bu belge ile, Samsung bu Notebook PCnin 1999/5/EC Ynetmeliinin temel gerekliliklerine ve ilgili hkmlerine uygun olduunu beyan eder. To view the EU Declaration of Conformity for this product (in English only), go to: http://www.samsung.com/uk/support/
download/supportDownMain.do then search the model number of the product. If the Declaration of Conformity for the model you are interested in is not available on our web-site, please contact your distributor. European Economic Area Restrictions Local Restriction of 802.11b/802.11g Radio Usage
[Note to integrator: The following statements on local restrictions must be published in all end-user documentation provided with the system or product incorporating the wireless product.]
Due to the fact that the frequencies used by 802.11b/802.11g wireless LAN devices may not yet be harmonized in all countries, 802.11b/802.11g products are designed for use only in specifi c countries or regions, and are not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are confi gured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. Regulatory Compliance Statements Chapter 4 Appendix 66 The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows:
For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor use. For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use. 2.420 - 2.4835 GHz for outdoor use (channels 5 to 13) The low band 5.15 - 5.35 GHz is for indoor use only. General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 2483.5 MHz. The low band 5.15 - 5.35 GHz is for indoor use only. Belgium The product may be used outdoors, but for outdoor transmissions over a distance of 300m or more, a license from the BIPT is required. This restriction should be indicated in the manual as follows:
Dans le cas dune utilisation prive, lextrieur dun btiment, au-
dessus dun espace public, aucun enregistrement nest ncessaire pour une distance de moins de 300m. Pour une distance suprieure 300m un enregistrement auprs de lIBPT est requise. Pour une utilisation publique lextrieur de btiments, une licence de lIBPT est requise. Pour les enregistrements et licences, veuillez contacter lIBPT. France For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use. 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. Regulatory Compliance Statements Chapter 4 Appendix 67 This equipment has been approved to Council Decision 98/482/
EEC - CTR 21 for Pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, you should contact manufacturer Technical Support. European Telecommunication Information
(for products fitted with EU-approved modems) indicates compliance of this equipment Marking by the symbol to the Radio and Telecom Terminal Equipment Directive 1999/5/
EC. Such marking is indicative that this equipment meets or exceeds the following technical standards:
CTR 21 - Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks
(PSTNs) of TE (excluding TE supporting voice telephony services) in which network addressing, if provided, is by means of Dual Tone Multi-Frequency (DTMF) signaling. Although this equipment can use either loop disconnect
(pulse) or DTMF (tone) signaling, only the performance of the DTMF signaling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use DTMF signaling for access to public or private emergency services. DTMF signaling also provides faster call setup. WEEE Symbol Information Chapter 4 Appendix 68 Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product Pb
(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material re-use, please separate batteries from other types of waste and recycle them through your local, free battery return system. USA ONLY This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA. Perchlorate Material- special handling may apply, See www.dtsc. ca.gov/hazardouswaste/perchlorate. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www. samsung.com/recyclingdirect Or call, (877) 278-0799 Product Specifications Chapter 4 Appendix 69 The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. CPU Intel ATOM Processor Main Memory Memory type: DDR3 SDRAM on board Main Chipset Intel NM10 HDD Graphics SSD Intel GMA 3150 (Internal) Operating Environment Temperature: -5~40C for storage, 10~32C when operating Humidity: 5~90% for storage, 20~80% when operating AC/DC Rating
(Optional) Input) 100-240VAC, 50/60Hz, Output) 19VDC 2.1A PC Rating (Optional) 19VDC 2.1A (40W) Optional components may not be provided or different components may be provided depending on the computer model. The system specifications are subject to change without notice. The amount of memory that Windows can use may be smaller than the actual amount of memory available. For this product, you cannot install an additional or replace the existing memory module. Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. Intel, ATOM are registered trademarks of the Intel Corporation. Chrome and Google are registered trademarks of the Google Corporation. Chrome OS Software License The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from website: http://git.chromium.org/gitweb/
This offer is valid to anyone in receipt of this information. ENERGY STAR Partner As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Glossary Chapter 4 Appendix 70 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. DDR SDRAM
(Double Data Rate Synchronous Dynamic Random Access Memory) DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price. SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock. DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays. This computer uses DDR SDRAM. DHCP (Dynamic Host Configuration Protocol) This refers to automatically allocating IP addresses to the users on the network by the network administrators. D-sub (D-subminiature) This is the cable connecting a general CRT monitor and the computer. Analog video is output through this cable. Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure. LAN (Local Area Network) A communications network connecting computers, printers and other devices within a local area such as within a building. A LAN enables all connected devices to interact with other devices on the network. The current LAN uses the Ethernet media access control method developed in the early 1980s. To connect to an Ethernet, a network card called a LAN card, Ethernet card or network interface card is required. To exchange data between computers, a protocol is required besides the hardware equipment. Windows Vista uses TCP/IP as the default protocol. LCD (Liquid Crystal Display) There are Passive Matrix and Active Matrix LCD types. This computer uses the Active Matrix type LCD called a TFT LCD. Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, its size can be slim. And because it does not blink, it reduces eye strain. MMC (MultiMedia Card) card This is an external-type flash memory used for mobile devices such as mobile phones or digital cameras. Glossary Chapter 4 Appendix 71 Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. PCMCIA (Personal Computer Memory Card International Association) card This is an extended card slot specification for mobile computers such as a notebook computer. Not only a memory, device but also most peripherals such as hard disk drives, LAN cards, etc. can be connected to this card slot. Protocol A protocol is a set of rules used by computers to communicate with each other across a network. A protocol is a convention or standard that controls or enables the connection, communication, and data transfer between computing endpoints. It defines the data transmission procedures and the transmission medium for more efficient network functions. SD (Secure Digital) card An SD card is a flash (non-volatile) memory card developed for mobile devices by improving on the MMC card. Although an MMC card can be used in an SD card slot, an SD card is not recognized when inserted into an MMC card. SDHC (Secure Digital High Capacity) card This is the extension of the SD card that supports over 2GB bytes. Sleep Mode A power mode that enables computers to save power consumption when they are not being used. When a computer is in Sleep Mode, the data on the computer memory is not saved to the hard disk. If the power is turned off, the data in memory will be lost. TCP/IPv4 This is a 4 byte (32 bit) address system separated into each byte
(8 bits) by a dot and each byte is represented as a decimal number. USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster than that of USB 1.1. The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore USB 2.0 is used for A/V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate.
| 1 2 | User manual | Users Manual | 660.28 KiB |
GT-Y3400 Installation Guide and User Manual
GT-Y3400 Installation Guide and User Manual 07.Feb, 2011 SAMSUNG ELECTRONICS.LTD.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
Table of contents 1 Introduction 1.1 Overview 1.1.1 Product description 1.1.2 Key features and specifications 2. Mechanical specifications 2.1 Specifications 2.1.1 Mechanical dimensions 2.1.2 Mini PCI Express interface 2.1.3 Antenna connectors 2.1.4 Connector location 2.1.5 Conducted RF measurement 2.1.6 RFx information
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3300 Installation Guide and User Manual
1 Introduction 1.1 Overview This manual is intended to be a complete technical reference and integration guide for the GT-
Y3400 module product. 1.1.1 Product description The GT-Y3400 module described in this manual are PCI Express Mini Cards support WWAN
(UMTS/HSPA+/HSUPA & GSM/GRPS/EDGE) connectivity to SAMSUNG notebooks. The module is manufactured and installed by SAMSUNG. It includes diversity receiver and equalization.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
1.1.2 Key features and specifications
RF subsystem
-2G GPRS / EDGE / 3GPP WCDMA HSPA+/HSUPA Platform
-ICERA Platform Band 2G ( 850/900/1800/1900), 3G (BAND1/BAND2/BAND5/BAND8) Size (mm)
- 30.0 x 26.8 x 4.72 mm Weight (g)
-5.5g Modem Memory
-ICERA ICE8060T
-MCP 1Gb/512Mb (Nand/SDRAM) RF
-ICERA ICE8260B General Features Mini PCI Express Card for Samsung Mini PC. (Half Type) GSM/GPRS/EDGE/UMTS/HSPA+ & HSUPA Support. Main Power is 3.3V and Rated Power Consumption is 900mA. UART, USB2.0 and Nexus IF Support (ICERA IF) Modem
- High data rate (HSUPA 5.76Mbps, HSPA+ 21Mbps)
- Dual antenna Rx diversity Micro processor
- Embedded DXP Processor
- Support Multi-mode EDGE,WCDMA,HSPA etc. Interface
- Highspeed USB functionality (2.0)
- USIM controller
- General Purpose I/O pins, UARTs.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
2. Mechanical specifications 2.1 Specifications 2.1.1 Mechanical dimensions Mechanical drawings of the GT-Y3400 module following one. Figure 3.Mechanical dimensions of the GT-Y3400 module 2.1.2 Mini PCI Express interface The card edge connector of the GT-Y3400 module complies with the PCI Express Mini Card specification and mates with a 52 pin Mini PCI Express connector. This specification defines an implementation for small form factor PCI Express cards. The specification uses a qualified sub-set of the same signal protocol, electrical definitions, and configuration definitions as the PCI Express Base Specification, Revision 1.1. Where this specification does not explicitly define PCI Express characteristics, the PCI Express Base Specification governs. The primary differences between a PCI Express add-in card (as defined by the PCI Express Card Electromechanical Specification) and a PCI Express Mini Card add-in card is a unique card form factor optimized for mobile computing platforms and a card-system interconnection optimized for communication applications. Specifically, PCI Express Mini Card add-in cards are smaller and have smaller connectors than standard PCI Express add-in cards. Figure 4 shows a 52 pin PCI Express Mini Card connector.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
Figure 4. 52 pin Mini PCI Express connector Figure 5 shows a conceptual drawing of this form factor as it may be installed in a mobile platform. Figure 5 does not reflect the actual dimensions and physical characteristics as those details are specified elsewhere in this specification. However, it is representative of the general concept of this specification to use a single system connector to support all necessary system interfaces by means of a common edge connector. Communications media interfaces may be provided via separate I/O connectors and RF connectors each with independent cables as illustrated in Figure 5.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
Figure 5. PCI Express Mini Card Add-in Card Installed in a Mobile Platform 2.1.3 Antenna connectors The SMD connectors used for the antenna connections on the GT-Y3400 module are delivered by Hirose Ltd.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
Figure 6. 2D Detail of the antenna connector Figure 7. Detail of mated height 2.1.4 Connector location The GT-Y3400 module supports receiver diversity. Both require a secondary antenna connection. The antenna connectors can be identified by the letters M for the main antenna and D for the Diversity, printed on the PCB. Diversity Antenna Main Antenna
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
GT-Y3400 Installation Guide and User Manual
Figure 8. placement of the antenna connectors for the GT-Y3400 2.1.5 Conducted RF measurement HSUPA / HSPA+ / UMTS
. Multi-bands variants / 850 / 900 / 1900 / 2100 MHz
. UMTS Power Class 3 (24 dBm)
. HSUPA mode: 5.76 Mbps: category 6
. HSPA+ mode: 21 Mbps: Category 14 EDGE / GPRS
. 850 / 900 / 1800 / 1900 MHz
. GSM Power Class 4 (32dBm) for 850 / 900 bands
. GSM Power Class 1 (28.5dBm) for 1800 / 1900 bands
. EDGE class E2 (26.5 dBm in 850 / 900 bands, 25.8 dBm in 1800 / 1900 bands)
. GPRS / EDGE Multi-slot Class 12 (4 slots Rx, 4 slots Tx)
2.1.6 RFx information The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Intel could void the users authority to operate this device. For more information, refer the attached document, please.
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics
2.
$QWHQQDB6SHF 2. Frequency Band Service Band
*60 80
*60 1900 WCDMA 2.1G Tx ( MH z) 824 ~ 849 1850 ~ 1910 1920 ~ 1980 Rx ( MHz ) 869 ~ 894 1930 ~ 1990 2110 ~ 2170 Impedance 2.2.1 Normal Value 50 Normal 2.2.1 Measuring Method 2.2
2. VSWR 2.3.1 Maximum values in free space The impedance over the frequency bands shall be as close as possible to 50 after matching. Both free space and talk position are considered. The impedance matching should be optimized in the more critical talk position. SERVICE VSWR
*60 80 TX 2.7 Rx 2.0
*60 1900 TX 2.9 RX 3.4 WCDMA 2.1G Rx Tx 2.7 1.9 2.3.2 Measuring Method A 50 coaxial cable is connected(soldered) to the 50 point, at the duplex-
filter on the main PCB. The connection of the coaxial cable shall be done to introduce a minimum of mismatch. As much as possible the coaxial cable arrangement shall prevent influences from induced currents on the cable. In the other end, the coaxial cable is connected to a network analyzer. The measurement is performed at room temperature. The handset, including the PCB, must not in any significant way differ from the mass production, i.e. the antenna feeding network has to be equivalent to the feeding network in mass production. The specification shall be met in the entire frequency band. Confidential Proprietary 4/16
2.4 Gain(dBi) 2.4.1 Measuring Method The connection is done according to 2.3.2. Radiation patterns are measured at 3 different Plane The antenna measured according to the figure 1 below.
Confidential Proprietary 5/16
2-4-2. Radiation Pattern
Z H CW Y X Figure 2 (a) CW CW E1 E2
Confidential Proprietary 6/16 IC: 649E-GTY3400X Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.
* Information for OEM integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Label for end product must include Contains FCC ID: A3LGTY3400X, IC: 649E-GTY3400X"
or A RF transmitter inside, FCC ID: A3LGTY3400X, IC: 649E-GTY3400X.
* Information pour les OEM intgrateur L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final concernant la faon d'installer ou de retirer ce module RF dans le manuel utilisateur du produit final. Le manuel de l'utilisateur qui est fourni par les intgrateurs OEM pour les utilisateurs finaux doivent inclure les renseignements suivants dans un endroit bien en vue. Pour se conformer aux exigences de conformit d'exposition RF de la FCC, l'antenne utilise pour ce transmetteur doit tre install pour fournir une distance de sparation d'au moins 20 cm de toute personne et ne doit pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. "
tiquette pour le produit final doit inclure "Contient FCC ID: A3LGTY3400X, IC: 649E-
GTY3400X" ou "A l'intrieur du transmetteur RF, FCC ID: A3LGTY3400X, IC: 649E-GTY3400X".
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2011-12-05 | 1852.4 ~ 1907.6 | PCB - PCS Licensed Transmitter | Class II permissive change or modification of presently authorized equipment |
| 2 | 2011-11-30 | 1852.4 ~ 1907.6 | PCB - PCS Licensed Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 | Effective |
2011-12-05
|
||||
| 1 2 |
2011-11-30
|
|||||
| 1 2 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
| 1 2 | FCC Registration Number (FRN) |
0027908797
|
||||
| 1 2 | Physical Address |
19 Chapin Rd., Building D
|
||||
| 1 2 |
Pine Brook, New Jersey 07058
|
|||||
| 1 2 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 2 | TCB Application Email Address |
c******@ccsemc.com
|
||||
| 1 2 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 2 | Grantee Code |
A3L
|
||||
| 1 2 | Equipment Product Code |
GTY3400X
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 | Name |
J****** C****
|
||||
| 1 2 | Title |
General Manager
|
||||
| 1 2 | Telephone Number |
973-8********
|
||||
| 1 2 | Fax Number |
973-8********
|
||||
| 1 2 |
j******@samsung.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/02/2012 | ||||
| 1 2 | 05/27/2012 | |||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 850/1900 GSM/GPRS/EDGE/WCDMA/HSPA | ||||
| 1 2 | 850/1900 GSM/GPRS/EDGE/WCDMA/HSPA Module | |||||
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 | Modular Equipment Type | Single Modular Approval | ||||
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
| 1 2 | Original Equipment | |||||
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 | Grant Comments | Class II permissive change for a mobile configuration with co-located WLAN transmitter. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.596 W , Part 24 EIRP 0.67 W. Modular approval. Antenna gain including cable loss must not exceed the values as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | ||||
| 1 2 | Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.596 W , Part 24 EIRP 0.67 W. Modular approval. Antenna gain including cable loss must not exceed the values as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations | |||||
| 1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 | Firm Name |
SGS Korea Co., Ltd.
|
||||
| 1 2 | Name |
F**** L****
|
||||
| 1 2 | Telephone Number |
82(0)********
|
||||
| 1 2 | Fax Number |
82(0)********
|
||||
| 1 2 |
f******@sgs.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 22H | 824.2 | 848.8 | 1.905 | 2.5 ppm | 252KGXW | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 22H | 824.2 | 848.8 | 0.49 | 2.5 ppm | 242KG7W | ||||||||||||||||||||||||||||||||||
| 1 | 3 | 22H | 826.4 | 846.6 | 0.195 | 2.5 ppm | 4M14F9W | ||||||||||||||||||||||||||||||||||
| 1 | 4 | 24E | 1850.2 | 1909.8 | 0.676 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
| 1 | 5 | 24E | 1850.2 | 1909.8 | 0.347 | 2.5 ppm | 250KG7W | ||||||||||||||||||||||||||||||||||
| 1 | 6 | 24E | 1852.4 | 1907.6 | 0.178 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 22H | 824.2 | 848.8 | 1.905 | 2.5 ppm | 252KGXW | ||||||||||||||||||||||||||||||||||
| 2 | 2 | 22H | 824.2 | 848.8 | 0.49 | 2.5 ppm | 242KG7W | ||||||||||||||||||||||||||||||||||
| 2 | 3 | 22H | 826.4 | 846.6 | 0.195 | 2.5 ppm | 4M14F9W | ||||||||||||||||||||||||||||||||||
| 2 | 4 | 24E | 1850.2 | 1909.8 | 0.676 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
| 2 | 5 | 24E | 1850.2 | 1909.8 | 0.347 | 2.5 ppm | 250KG7W | ||||||||||||||||||||||||||||||||||
| 2 | 6 | 24E | 1852.4 | 1907.6 | 0.178 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC