FCC ID: A3LGTI9100 Cellular/ PCS WCDMA/ GSM/ EDGE Phone with WLAN and Bluetooth

by: Samsung Electronics Co Ltd latest update: 2012-07-24 model: GTI9100

Fourteen grants have been issued under this FCC ID from 03/11/2011 to 07/24/2012 (this is one of one thousand, one hundred and sixty-four releases in 2012 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, password defaults, instructions, warrantee terms, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Users Manual Users Manual pdf 376.34 KiB November 03 2011
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Test Report pdf October 02 2012
various External Photos External Photos pdf 160.10 KiB October 02 2012 / August 08 2012
various Internal Photos Internal Photos pdf 679.72 KiB October 02 2012 / August 08 2012
various Test Report pdf October 02 2012
various Attestation Statements pdf May 05 2011 / November 03 2011
various Test Report pdf November 03 2011
various ID Label/Location Info pdf November 03 2011
various Cover Letter(s) pdf May 01 2012 / November 03 2011
various Users Manual Users Manual pdf 376.34 KiB November 03 2011
various External Photos External Photos pdf 160.10 KiB October 02 2012 / August 08 2012
various Internal Photos Internal Photos pdf 679.72 KiB October 02 2012 / August 08 2012

frequency equipment class purpose
1 2012-07-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 1852.4 ~ 1907.6 PCE - PCS Licensed Transmitter held to ear
3 5745 ~ 5805 DTS - Digital Transmission System
4 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
5 2012-02-10 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
6 JBP - Part 15 Class B Computing Device Peripheral
7 1852.4 ~ 1907.6 PCE - PCS Licensed Transmitter held to ear
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5745 ~ 5805 DTS - Digital Transmission System
10 2011-03-11 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX Original Equipment
11 5745 ~ 5805 DTS - Digital Transmission System
12 JBP - Part 15 Class B Computing Device Peripheral
13 1852.4 ~ 1907.6 PCE - PCS Licensed Transmitter held to ear
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2012-07-24
various 2012-02-10
various 2011-03-11
various Applicant's complete, legal business name Samsung Electronics Co Ltd
various FCC Registration Number (FRN) 0005810205
various Physical Address 19 Chapin Rd., Building D
various Pine Brook, NJ
various United States
app s TCB Information
various TCB Application Email Address t******@pctestlab.com
various p******@pctestlab.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code A3L
various Equipment Product Code GTI9100
app s Person at the applicant's address to receive grant or for contact
various Name J******** C********
various Title General Manager
various Telephone Number 973-8********
various Fax Number 973-8********
various E-mail j******@samsung.com
app s Technical Contact
various Firm Name PCTEST Engineering Lab., Inc.
various PCTEST Engineering Laboratory, Inc.
various Name R******** O******
various Physical Address 6660-B Dobbin Road
various Columbia, Maryland 21045
various United States
various Telephone Number 410-2********
various Fax Number 410-2********
various E-mail t******@pctestlab.com
various p******@pctestlab.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/20/2013
various08/08/2012
various05/16/2011
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousPCE - PCS Licensed Transmitter held to ear
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Cellular/ PCS WCDMA/ GSM/ EDGE Phone with WLAN and Bluetooth
variousCellular/PCS WCDMA/GSM/EDGE Phone with WLAN and Bluetooth
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive Change Output power is conducted. This device is approved for use in the handset described in the filing.
variousClass II Permissive Change Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit, optional accessory and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific use (wireless router) and simultaneous transmission use conditions is 0.40 W/kg, 1.00 W/kg, 1.00 W/kg, and 1.16 W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.
variousClass II Permissive Change Output power is conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit, optional accessory and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific use (wireless router) and simultaneous transmission use conditions is 0.26 W/kg, 0.13 W/kg, 0.13 W/kg, and 1.16 W/kg respectively.
variousClass II Permissive Change Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit, optional accessory and the body of the user End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory and simultaneous transmission use conditions is 0.17 W/kg, 0.16 W/kg, and 1.16 W/kg respectively. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection.
variousClass II Permissive Change. Output Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips / holsters / accessories tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions are 0.17 W/kg, 0.16 W/kg, and 1.16 W/kg, respectively. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection.
variousClass II Permissive Change
variousClass II Permissive Change Output power listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips / holsters / accessories tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.40 W/kg, 1.00 W/kg, 1.00 W/kg, and 1.16 W/kg, respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.
variousClass II Permissive Change Output power is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips / holsters / accessories tested for this filing, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.21 W/kg, 0.13 W/kg, 0.13 W/kg, and 1.16 W/kg, respectively.
variousPower output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values are: 5.2 GHz - Head: 0.14 W/kg; Body: 0.00 W/kg; 5.3 GHz - Head: 0.08 W/kg; Body: 0.00 W/kg; 5.5 GHz - Head: 0.14 W/kg; Body: 0.01 W/kg. This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection.
variousPower output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values are: 2.4 GHz - Head: 0.11 W/kg; Body: 0.07 W/kg; 5.8 GHz Head: 0.03; Body: 0.00 W/kg.
variousPower output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values are: Part 22 - Head: 0.11 W/kg; Body: 0.49 W/kg; Part 24 - Head: 0.16 W/kg; Body: 0.96 W/kg. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.
variousOutput power is conducted. This device is approved for use in the handset described in the filing.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name PCTEST Engineering Laboratory, Inc.
various Name R****** O****
various Telephone Number 410-2********
various Fax Number 410-2********
various E-mail r******@pctestlab.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 22H 826.4 846.6 0.074 2.5 ppm 4M05F9W
2 2 22H 824.2 848.8 0.398 2.5 ppm 243KGXW
2 3 22H 824.2 848.8 0.347 2.5 ppm 246KG7W
2 4 24E 1852.4 1907.6 0.331 2.5 ppm 4M04F9W
2 5 24E 1850.2 1909.8 1.954 2.5 ppm 243KGXW
2 6 24E 1850.2 1909.8 1.384 2.5 ppm 246KG7W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2412 2462 0.042
3 2 15C CC 5745 5805 0.019
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC 5180 5240 0.021 2.5 ppm
4 2 15E CC 5260 5320 0.02 2.5 ppm
4 3 15E CC 5500 5700 0.019 2.5 ppm
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC 5180 5240 0.021 2.5 ppm
5 2 15E CC 5260 5320 0.02 2.5 ppm
5 3 15E CC 5500 5700 0.019 2.5 ppm
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15B 16 CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 22H 826.4 846.6 0.074 2.5 ppm 4M05F9W
7 2 22H 824.2 848.8 0.398 2.5 ppm 243KGXW
7 3 22H 824.2 848.8 0.347 2.5 ppm 246KG7W
7 4 24E 1852.4 1907.6 0.331 2.5 ppm 4M04F9W
7 5 24E 1850.2 1909.8 1.954 2.5 ppm 243KGXW
7 6 24E 1850.2 1909.8 1.384 2.5 ppm 246KG7W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2412 2462 0.042
9 2 15C CC 5745 5805 0.019
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC 5180 5240 0.021 2.5 ppm
10 2 15E CC 5260 5320 0.02 2.5 ppm
10 3 15E CC 5500 5700 0.019 2.5 ppm
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2412 2462 0.042
11 2 15C CC 5745 5805 0.019
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15B 16 CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 22H 826.4 846.6 0.074 2.5 ppm 4M05F9W
13 2 22H 824.2 848.8 0.398 2.5 ppm 243KGXW
13 3 22H 824.2 848.8 0.347 2.5 ppm 246KG7W
13 4 24E 1852.4 1907.6 0.331 2.5 ppm 4M04F9W
13 5 24E 1850.2 1909.8 1.954 2.5 ppm 243KGXW
13 6 24E 1850.2 1909.8 1.384 2.5 ppm 246KG7W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0100000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC