510/710-E 7/21/98 3:22 PM Page i Color Monitor Owners Instructions 510/710-E 7/21/98 3:22 PM Page ii 3A 1 Before connecting the AC power cord to an outlet, make sure the voltage designation on your monitor corre-
sponds to the local electrical supply. monitor openings. Doing so may create the danger of electric shock. 2 Never insert anything metallic into the 3 To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitors case. 4 Never use your monitor if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from areas where people can trip over it. when disconnecting the monitor from an electric socket. 5 Be sure to hold the plug, not the cord, 6 Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. 7 Put your monitor in a location with low humidity and a minimum of dust. 8 Do not expose the monitor to rain or use it near water (in kitchens, near swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immedi-
ately. You can clean the monitor with a damp cloth when necessary, but be sure to unplug the monitor first. 9 Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped, hit or scratched. accessible AC outlet. 10 Locate your monitor near an easily 11 If your monitor does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center. 12 High temperatures can cause problems. Dont use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat. be left unused for an extended period of time. 13 Unplug the monitor when it is going to 14 Unplug your monitor from the AC outlet before any service. C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ii 510/710-E 7/21/98 3:22 PM Page 1 Safety Instructions.................................................................................................................ii Your New Monitor ..................................................................................................................2 Connecting Your Monitor................................................................................................................2 Front Panel ........................................................................................................................................3 Direct Access Buttons ....................................................................................................................3 Operation .................................................................................................................................4 On-screen Menu System................................................................................................................4 Monitor Function Control................................................................................................................5 Brightness ..........................................................................................................................5 Contrast ..............................................................................................................................5 Horizontal Position ...........................................................................................................5 Vertical Position ................................................................................................................5 Horizontal Size ...................................................................................................................5 Vertical Size........................................................................................................................5 Pincushion ..........................................................................................................................5 Display Timing ....................................................................................................................5 Advanced Features ...........................................................................................................6 Color Temperature......................................................................................................6 Language .....................................................................................................................6 Half tone.......................................................................................................................6 Moire ...................................................................................................................................6 Degauss ..............................................................................................................................6 Recall...................................................................................................................................6 Geometry.............................................................................................................................6 Pinbalance...................................................................................................................6 Parallelogram..............................................................................................................6 Rotation ........................................................................................................................6 V-linearity.....................................................................................................................6 Trapezoid.............................................................................................................................6 Troubleshooting......................................................................................................................7 PowerSaver.............................................................................................................................7 Specifications .........................................................................................................................8 Display Modes ........................................................................................................................8 Index.........................................................................................................................................9 Regulation Information.........................................................................................................iii 1 510/710-E 7/21/98 3:23 PM Page 2 3 Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. This manual Driver installation diskette Monitor & stand Power cord Connecting Your Monitor Warranty card
(not available in all locations) 3 2 5 4 4 Power port Connect the power cord for your monitor to the power port on the back of the monitor. 5 Power cords Plug the power cord for the monitor and the power cord for your computer into a nearby outlet. 6 Turn on your computer and monitor. If your monitor displays an image, installation is complete. To install the monitor driver on your PC:
1. Insert the provided diskette into the A drive. 2. Double click the install.exe file. the power cord. 1 Turn off your computer and unplug 2 Video port Connect the signal cable (with an adapter if necessary) to the video port on the back of your computer, video board, video card, or graphics card. 3 Signal cable Connect the end of the signal cable to your computers video port. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter (adapter not included). An IBM-compatible computer does not need an adapter. 2 510/710-E 7/21/98 3:23 PM Page 3 Front Panel 1 2 3 4 3 The button This button is used with the on-screen menu system to select a highlighted function for adjustment. Also used to move between menus when using the on-screen menu system. 4 Power button Turns the monitor on and off. The power indicator light glows green during normal operation. 1 Menu button Opens and closes the on-scre e m e n u . Also used to move between menus when using the on-screen menu system. 2 The /+ buttons These buttons allow you to select and adjust items using the on-screemenu. When adjusting an item using the o n - s c reen menu, the ( _ ) button lowers the value of the selected function. The ( + ) button raises the value of the selected function. These buttons are also d i rect access buttons for the Contrast and Brightness feature controls. (See the section on Direct Access Buttons). Direct Access Buttons Most of the adjustments you make to your monitor will be accessed through the on-screen menu described in the next section. The Contrast and Brightness features can also be accessed with the touch of a button on the front of your monitor. button accesses the Brightness feature. The button accesses the Contrast feature. 1 With the menu off, press the or button on the front of your monitor. The 2 Push the button to increase or the button to decrease the value of a selection. 3 Press the menu button twice to exit the on-screen menu. 3 510/710-E 7/21/98 3:23 PM Page 4 On-screen Menu System Your monitor has an on-screen menu system, accessed by the buttons on the front of your monitor, that allows you to adjust characteristics of the screen image. Display changes are indicated by on-screen adjustment icons. Some functions have sub-menus. Function icons are arranged across the top of the on-screen menu. The name of the active function will appear below the rows of function icons. 1 Push the menu button to display the main menu. 2 Push the or button to move through the icons. 3 To select a function or open a sub-menu, push the button. The screen will 4 Use the and buttons to make adjustments. The increases values, the 5 Push the menu button to exit and save your changes. decreases values. On-screen calibration numbers show the effect of your adjustment. If you are in a sub-menu, use the menu button to return to the previous menu. display the options for adjustment. If there is a sub-menu, use the or button to highlight the feature you want to adjust, then push the button to select it. B r i g h t n e s s
:A c c e s s F u n c t i o n
: E x i t M e n u Function icons Active function Adjustment icons Function selection and Menu navigation 4 510/710-E 7/21/98 3:23 PM Page 5 Icon Monitor Function Control O n - s c reen Adjustment Brightness Background brightness of screen.
- decreases brightness
+ increases brightness Contrast Contrast of screen image.
- decreases contrast
+ increases contrast Horizontal Position Horizontal screen position.
- moves the screen left
+ moves screen right Vertical Position Vertical screen position.
- moves screen down
+ moves screen up Horizontal Size Horizontal screen size.
- decreases size
+ increases size Vertical Size Vertical screen size.
- decreases size
+ increases size Pincushion Straightness of vertical edges.
- curves image inward
+ curves image outward Display Timing Monitor display settings.
- factory timing
+ user timing Brightness
:Access Function Contrast
:Access Function Horizontal Position
:Access Function Veritical Position
:Access Function Horizontal Size
:Access Function Veritical Size
:Access Function Pincushion
:Access Function Display Timing
:Used Mode 5 510/710-E 7/21/98 3:23 PM Page 6 Icon Monitor Function Control O n - s c reen Adjustment Advanced Features Color temperature
- 9300k more blue
+ 6500k more red Language Half tone
- off
+ on
- , + scroll through on-screen language options. Moire Correct for on-screen moire pattern.
- horizontal moire
+ vertical moire Degauss Removes color distortion caused by magnetic fields. Do not use more than once in 30 minutes. Recall Returns monitor to original settings.
- no
+ yes Geometry Pinbalance
- curves vertical lines to left
+ curves vertical lines to right Parallelogram
- skews screen image left
+ skews screen image right
- rotates entire screen right
+ rotates entire screen left Rotation V-linearity 1. 2. 1. 2. Advanced Features
:Access Function
:Exit Functioin Color Temperature
+ - :Select Funtion
:Previous Mune Moire
:Access Function Degauss
:Access Function Recall
:Access Function Geometry
:Access Function
:Exit Functioin Pinbalance
+ - :Select Funtion
:Previous Mune
- compresses image at top of screen
+ compresses image at bottom of screen Trapezoid Width of top and bottom of screen.
- widens top of screen
+ widens bottom of screen Trapezoid
:Access Function 6 510/710-E 7/21/98 3:23 PM Page 7 Before calling for service, check the information in this section to see if you can solve the problem yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer. There is no screen image. Check Signal Cable appears. Check to see that both the monitor and the computer are plugged in and turned on. Check the signal cable connection between the computer and the monitor. The screen image is too light or too dark. Adjust the brightness or contrast settings. The screen image is too large or too small. Adjust the size settings. The colors are distorted with dark or shadowed areas. Activate the degauss feature. Adjust the color temperature. The power indicator light is blinking green. The monitor is using its power management system. You need the monitor driver software. You can download the driver from the internet at http : //www.samsungelectronics.com. This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. Power Saving function mode EPA/NUTEK State Operation Power Indicator Power Consumption Normal Standby mode Green Green Blinking
(0.5 sec interval) 510b: 80W (maximum) 50W (nominal) 70W (nominal) 710s: 90W (maximum) 80W (nominal) Suspend mode Position A1 Green Blinking
(0.5 sec interval) Less than 15W Power-off Mode Position A2 Green Blinking
(1 sec interval) Less than 5W NOTE: This monitor is EPA ENERGY STAR compliant and NUTEK compliant when used with a computer equipped with VESA DPMS functionality. 7 510/710-E 7/21/98 3:23 PM Page 8 3 Specifications Models: Sync Master 510b & 710s Picture Tube Synchronization Display Color Maximum Resolution Active Display Input Signal, Terminated Maximum Pixel Clock Power Supply Power Consumption Dimensions/Weight
(WxDxH) Environmental Considerations 0.28mm dot pitch 30kHz to 70 kHz 50 Hz to 160 Hz 510b: 15 (38 cm) Full square type (35 cm viewable) 710s: 17 (43 cm) Full square type (40 cm viewable) 90 deflection Silica Coated with anti-electrostatic properties
(TCO : Multi Layer coating) Medium-short persistence phosphor Horizontal:
Vertical:
Unlimited 1280 dots Horizontal:
Vertical:
Analog:
Separate Sync:
110 MHz AC 100-240 Volt 10%, 60 Hz/50 Hz 3 Hz 510b: 80 watt maximum 710s: 90 watt maximum 510b: 362 x 390 x 377mm/12.7 kg 7 1 0 s :420 x 425 x 421 mm /16.5 kg U n i t :
Carton: 5 1 0 b : 454 x 497 x 445mm/14.5 kg 7 1 0 s : 534 x 552 x 541 mm /19.0 kg Operating temperature:
Humidity:
Storage temperature:
1024 lines 510b: 267 4mm 510b: 200 4mm
.7Vpp positive at 75 ohms TTL level, positive or negative 32F to 104F (0C to 40C) 10% to 80%
-4F to 113F (-20C to 45C) 710s: 306 4mm 710s: 230 4mm Design and specifications are subject to change without notice. Horizontal Frequency
(kHz) Vertical Frequency
(Hz) 31.469 31.469 37.500 43.269 46.875 53.674 60.023 68.677 70.087 59.940 75.000 85.008 75.000 85.061 75.029 84.997 Pixel Clock
(MHz) 28.322 25.175 31.500 36.000 49.500 56.250 78.750 94.500 Sync Polarity
(H/V)
/ +
/
/
/
+ / +
+ / +
+ / +
+ / +
Display Mode IBM, VGA2, 720 x 400 IBM, VGA3, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 8 510/710-E 7/21/98 3:23 PM Page 9 A Adapter . 2 Advanced features . 6 B Brightness . 5 Button, . 3 Buttons, + / . 3 C Color temperature . 6 Connecting your monitor . 2 Contrast . 5 D Degauss . 6 Direct access buttons . 3 Display modes . 8 Display timing . 5 Driver diskette . 2 Driver installation . 2 F FCC information . i i i Front panel . 3 G Geometry . 6 H Half tone . 6 Horizontal position . 5 Horizontal size . 5 I IC compliance notice . i i i I n s t a l l a t i o n . 2 L Language . 6 M Macintosh . 2 Manual . 2 Menu button . 3 Moire . 6 Monitor function control . 5, 6 MPR II compliance . i i i N Notice de conformit IC . i i i O Operation . 4 On-screen menu system . 4 P Parallelogram . 6 Pinbalance . 6 Pincushion . 5 Power button . 3 Power cords . 2 Power indicator . 3 Power port . 2 PowerSaver . 7 R Recall . 6 Rotation . 6 Regulation information . i i i S Safety instructions . ii Signal cable . 2 Specifications . 8 Sub-menus . 3, 4 T Table of contents . 1 Trapezoid . 6 Troubleshooting . 7 V Vertical position . 5 Vertical size . 5 Video port . 2 V-linearity . 6 W Warranty card . 2 Y Your new monitor . 2 9 510/710-E 7/21/98 3:23 PM Page 10 3 Regulation Information 85 West Tasman Drive San Jose, CA 95134 USA Tel) 408-544-5124 Fax) 408-544-5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with simi-
lar configuration. Before making the connection, make sure the voltage rating of the computer convenience out-
let is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor voltage rating. For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type (parallel blades) plug cap. For 240 Volt applications use only UL Listed Detachable power supply cord with NEMA config-
uration 6015P type (tandem blades) plug cap. IC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations of ICES-003. Cet appareil numrique de classe B respecte toutes les exigences du Rglement ICES-003 sur les quipements produisant des interfrences au Canada. MPR II Compliance This monitor complies with SWEDAC (MPR II) re c o m m e n d a-
tions for reduced electric and magnetic fields. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms:
EN55022 (CISPR 22) Radio Frequency Interference EN50082-1 : 1992 Electromagnetic Immunity EN60555-2 (IEC555-2) Power Line Harmonics EN60555-3 (IEC555-3) Voltage Fluctuations EN60950 (IEC950) Product Safety. FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re a s o n-
able protection against harmful interf e rence in a re s i d e n t i a l installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interf e re n c e to radio communications. However, there is no guarantee that i n t e rf e rence will not occur in a particular installation. If this equipment does cause harmful interf e rence to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to corre c t the interf e rence by one or more of the following measure s :
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV techni-
cian for help. User Information Changes or modifications not expressly approved by the p a rty responsible for compliance could void the users authority to operate the equipment. If necessary, consult your dealer or an experienced radio/television technician for additional suggestions. Yo u may find the booklet called How to Identify and Resolve Radio/TV Interf e rence Pro b l e m s helpful. This booklet was p re p a red by the Federal Communications Commission. It is available from the U.S. Government Printing Off i c e , Washington, DC 20402, Stock Number 004-000-00345-4. Warning User must use shielded signal interface cables to main-
tain FCC compliance for the product. Declaration of conformity for prod-
ucts Marked with FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interf e rence, and (2) this device must accept any interf e rence received, includ-
ing interference that may cause undesired operation. The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD QA Lab of Samsung America 510/710-E 7/21/98 3:23 PM Page 11 ESPAA :
Samsung Electrnics Comercial Ibrica, S.A. Ciencies, 55-65 (Polgono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 UK :
Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Surrey KT6 7LD Tel. : (0181) 391 0168 Fax. : (0181) 397 9949
<European Service Center & National Service>
Stafford Park 12 Telford, Shropshire, TF3 3BJ Tel. : (01952) 292 262 Fax. : (01952) 292 033 THAILAND :
Samsung Service Center 729-729/1 JSP Tower Rachadapisek RD., Bangpongpang, Yannawa, Bangkok 10120 Tel : (662) 2954508-14 Fax : (662) 2954267 SOUTH AFRICA :
Samsung Electronics South Africa Somerset Office Park 5 Libertas Road Bryanston, South Africa Tel : (27)-11-463-5678 Fax : (27)-11-463-5215 BRASIL :
Samsung Eletrnica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303-2 Andar Chcara Sto. Antnio cep : 04719-040 So Paulo SP Tel. : (011) 541-8500 Fax : (011) 523-3995, 522-0726 U.S.A. :
Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax-on-Demand for product information :
1-800-229-2239 CANADA :
Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax. : (905) 542-1199 GERMANY :
Samsung Electronics GmbH Samsung-Haus Am Kronberger Hang 6/65824 Schwalbach/Ts. Tel. : 06196-66-1134 Fax. : 06196-66-1133 AUSTRALIA :
Samsung Electronics Australia Pty Ltd. Unit G, 10-16 South Street, Rydalmere, N.S.W. 2116 P.O. BOX 368 Tel. : (02) 638 5200 ITALIA :
Samsung Electronics Italia SpA Via C. Donat Cattin, 5-20063 Cernusco sul Naviglio (Mi) Tel. : 167-010740 PANAMA :
Servicios Samsung (Zona Libre), S.A. 50 and 61 Streets Sta, Cecilia Bdl. Don Camilo, Panama City Tel. : (507) 264-0195 or 269-5571 Fax : (507) 269-5568 MEXICO :
Samsung Electronics Mexico, S.A. DE C. V. Mina No. 200, Esq. Gavilan Col. Guadalupe Del Moral Iztapalapa, Mexico, D.F. C.P. 09300 Tel. : (525) 686-0800 Fax : (525) 686-5094 CODE NO. : BH68-61102A ( Rev. 0.2 ) Printed on recyclable paper