all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual | Users Manual | 2.73 MiB | / July 08 2009 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | / July 08 2009 | ||||||
1 2 | Internal Photos | / July 08 2009 | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | / July 08 2009 |
1 2 | User manual | Users Manual | 2.73 MiB | / July 08 2009 |
User Manual CL65 This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly. Click a topic Quick reference Contents Basic functions Extended functions Shooting options Playback/Editing Wireless network/Bluetooth Appendixes Index Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warningsituations that could cause injury to yourself or others Cautionsituations that could cause damage to your camera or other equipment Notenotes, usage tips, or additional information Safety warnings Do not use your camera near ammable or explosive gases and liquids Do not use your camera near fuels, combustibles, or ammable chemicals. Do not store or carry ammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. Keep your camera away from small children and pets Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Prevent damage to subjects eyesight Do not use the ash in close proximity (closer than 1 m/3 ft) to people or animals. Using the ash too close to your subjects eyes can cause temporary or permanent damage. Handle and dispose of batteries and chargers with care
Use only Samsung-approved batteries and chargers. Incompatible batteries and chargers can cause serious injuries or damage to your camera. Never dispose of batteries in a re. Follow all local regulations when disposing of used batteries. Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between cameras and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your camera is interfering with a pacemaker or other medical device, turn off the camera immediately and contact the manufacturer of the pacemaker or medical device for guidance. 1 Health and safety information Safety precautions Handle and store your camera carefully and sensibly
Do not allow your camera to get wetliquids can cause serious damage. Do not handle your camera with wet hands. Water damage to your camera can void your manufacturers warranty. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your cameras internal components. Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Protect your camera from sand and dirt when using it on beaches or in other similar areas. Protect your camera and monitor from impact, rough handling, and excessive vibration to avoid serious damage.
Exercise caution when connecting cables or adapters and installing batteries and memory cards. Forcing the connectors, improperly connecting cables, or improperly installing batteries and memory cards can damage ports, connectors, and accessories. Do not insert foreign objects into any of your cameras compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. Protect batteries, chargers, and memory cards from damage
Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0 C/32 F or above 40 C/104 F). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. Prevent batteries from making contact with metal objects, as this can create a connection between the + and terminals of your battery and lead to temporary or permanent battery damage. Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before inserting in your camera. Turn off the camera when inserting or removing the memory card. 2 Health and safety information
Do not bend, drop, or subject memory cards to heavy impact or pressure. Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. Never use a damaged charger, battery, or memory card. Use only Samsung-approved accessories Using incompatible accessories may damage your camera, cause injury, or void your warranty. Protect your cameras lens
Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. Protect your lens from ngerprints and scratches. Clean your lens with a soft, clean, debris-free lens cloth. Use earphones with caution
Do not use earphones while driving, cycling, or operating motorized vehicles. Doing so may create a trafc hazard and may be illegal in some areas. Use only the minimum volume setting necessary. Listening to earphones at high volume can damage your hearing. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a camera in a certain area. Turn off the camera near medical equipment Your camera can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the camera when in an aircraft Your camera can cause interference with aircraft equipment. Follow all airline regulations and turn off your camera when directed by airline personnel. Avoid interference with other electronic devices Your camera emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles. Consult the manufacturers of your electronic devices to solve any interference problems you experience. 3 Check that the camera is operating properly before use The manufacturer takes no responsibility for any loss of les or damage that may result from camera malfunction or improper use. Use your camera in the normal position Avoid contact with your cameras internal antenna. Health and safety information Important usage information Allow only qualied personnel to service your camera Do not allow unqualied personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualied service is not covered by your warranty. Ensure maximum battery and charger life
Overcharging batteries may shorten battery life. After charging is nished, disconnect the cable from your camera. Over time, unused batteries will discharge and must be recharged before use. Disconnect chargers from power sources when not in use. Use batteries only for their intended purpose. Exercise caution when using the camera in humid environments When transferring the camera from a cold environment to a warm and humid one, condensation can form on the delicate electronic circuitry and memory card. In this situation, wait for at least 1 hour until all moisture has evaporated before using the camera. 4 2009 Samsung Electronics America, Inc. Camera specications or contents of this manual may be changed without prior notice due to upgrade of camera functions. Copyright information
Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. Mac is a registered trademark of the Apple Corporation. Organization of the user manual Basic functions Learn about your cameras layout, icons, and basic functions for shooting, and how to transfer les to and from your computer. Extended functions Learn how to take a photo by selecting a mode and how to record a video or voice memo. Shooting options Learn about the options you can set in Shooting mode. Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your photo printer or TV. Wireless network/Bluetooth Learn to use several functions using wireless local area networks
(WLANs) and the Bluetooth feature. With the WLAN, you can upload and send photos and videos to websites or email addresses. You can also share photos with devices that support the Digital Living Network Alliance (DLNA) standard. With the Bluetooth feature, you can send your photos to other Samsung mobile phones or PDAs. Appendixes Refer to settings, error messages, specications, and maintenance tips. 11 24 33 55 71 83 5 Indications used in this manual Icons used in this manual Shooting mode Smart Auto Auto Program Scene DIS Movie Indication S a p s d v Shooting mode icons Icon Function Additional information Safety warnings and precautions Camera buttons; for example: [Shutter] (represents the shutter button) Page number of related information The order of options or menus you must select to perform a step; for example: Select >
(represents Select >, and then Annotation
These icons indicate that a function is available in the corresponding modes. The s mode may not support functions for all scenes. e.g.) Abbreviations used in this manual Available in the Program, DIS, and Movie modes Abbreviation Denition ACB AEB AF DIS DPOF EV WB Auto Contrast Balance Auto Exposure Bracket Auto Focus Digital Image Stabilization Digital Print Order Format Exposure Value White Balance 6 Expressions used in this manual Pressing the shutter
Half-press [Shutter]: press the shutter halfway down
Shutter]: press the shutter all the way down Press [
Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter. Half-press [Shutter]
Press [Shutter]
Normal exposure Overexposure (too bright) Subject, background, and composition
Subject or still life Background Composition
: the main object of a scene, such as a person, animal,
: the objects around the subject
: the combination of a subject and background Subject Background Composition 7 Quick reference Taking photos of people Adjusting the exposure (brightness) s
mode > Beauty Shot, Portrait, Children f 33 Red-eye, Red-eye Fix (to prevent or correct red-eye) f 45 Face Detection f 50
Taking photos at night or in the dark s
mode > Night, Dawn, Firework f 33 Flash options ISO speed (to adjust the sensitivity to light) f 45 f 46 Taking action photos Continuous, Motion Capture f 58
Taking photos of text, insects, or owers mode > Close Up, Text f 33 Macro, Auto Macro, Super Macro (to take close-up photos) f 47 White balance (to change the color tone) f 56
s
f 46 f 53 ISO speed (to adjust the sensitivity to light) EV (to adjust exposure) ACB (to compensate for subjects against bright backgrounds) f 54 Metering AEB (to take 3 photos of the same scene with different exposures) f 58 f 55 Applying a different effect
Photo styles (to apply tones) Image adjustment (to adjust saturation, sharpness, or contrast) f 60 f 59 Reducing camera shake d mode f 36 8
f 74 Viewing les by category in Smart Album f 63 Deleting all les on the memory card f 65 Viewing les as a slide show f 67 Viewing les on a TV Connecting your camera to a computer f 22 Adjusting sound and volume f 88 Adjusting the brightness of the display f 88 Changing the display language f 88 Setting the date and time f 89 Formatting the memory card f 89 Troubleshooting f 96 Contents Basic functions ...................................................................... 11 Unpacking ......................................................................... 12 Camera layout ................................................................... 13 Icons ................................................................................. 15 Turning your camera on or off ........................................... 16 Using the touch screen ..................................................... 17 Setting the touch screen ................................................... 19 Selecting a display type ....................................................... 19 Setting the touch vibration or sound ...................................... 19 Taking photos .................................................................... 20 Zooming ............................................................................. 21 Tips for getting a clearer photo .......................................... 22 Extended functions .............................................................. 24 Shooting modes ................................................................ 25 Using the Smart Auto mode ................................................. 25 Using the Scene mode ........................................................ 26 Using the Beauty Shot mode ................................................ 26 Using the frame guide .......................................................... 27 Adjusting the exposure in the Night mode .............................. 28 Using the DIS mode ............................................................ 29 Using the Program mode ..................................................... 29 Recording a video ............................................................... 30 Recording voice memos ................................................... 32 Recording a voice memo ..................................................... 32 Adding a voice memo to a photo .......................................... 32 Shooting options ................................................................... 33 Selecting a resolution and quality ...................................... 34 Selecting a resolution ........................................................... 34 Selecting image quality ........................................................ 35 Using the timer .................................................................. 36 Shooting in the dark .......................................................... 38 Preventing red-eye .............................................................. 38 Using the ash .................................................................... 38 Adjusting the ISO speed ...................................................... 39 Changing the cameras focus ............................................ 40 Using macro ....................................................................... 40 Using auto focus ................................................................. 40 Using smart touch focus ...................................................... 41 Adjusting the focus area ....................................................... 42 Using face detection ......................................................... 43 Detecting faces ................................................................... 43 Taking a self portrait shot ...................................................... 44 Taking a smile shot .............................................................. 44 Detecting eye blinking .......................................................... 44 Using smart face recognition ................................................ 45 Adjusting brightness and color .......................................... 46 Adjusting the exposure manually (EV) .................................... 46 Compensating for backlighting (ACB) .................................... 47 Changing the metering option ............................................... 48 Selecting a light source (White balance) ................................. 49 Using burst modes ............................................................ 51 Improving your photos ...................................................... 52 Applying photo styles ........................................................... 52 9 Contents Dening your own RGB tone ................................................ 52 Adjusting your photos .......................................................... 53 Taking a shot with location information .............................. 54 Playback/Editing ................................................................... 55 Playing back ...................................................................... 56 Starting Playback mode ....................................................... 56 Viewing photos ................................................................... 60 Playing a video .................................................................... 62 Playing a voice memo .......................................................... 63 Editing a photo .................................................................. 64 Rotating a photo .................................................................. 64 Resizing photos .................................................................. 64 Editing color ........................................................................ 65 Dening your own RGB tone ................................................ 65 Applying a special effect ...................................................... 66 Correcting exposure problems ............................................. 66 Creating a print order (DPOF) ................................................ 67 Viewing les on a TV (HDTV) ............................................. 68 Printing photos with a photo printer (PictBridge) ............... 69 Wireless network/Bluetooth ............................................... 71 Connecting to a WLAN and conguring network settings . 72 Connecting to a WLAN automatically .................................... 72 Connecting to a WLAN manually .......................................... 73 Storing your information ....................................................... 73 Storing email addresses ....................................................... 74 Setting the le size to share .................................................. 74 Checking information ........................................................... 74 Entering text ........................................................................ 75 Using photo or video sharing websites .............................. 76 Accessing a website ............................................................ 76 Uploading photos ................................................................ 77 Sending photos via email .................................................. 78 Sending photos to the DLNA devices ............................... 79 Viewing photos on a TV screen ............................................ 79 Viewing photos on another device ........................................ 80 Sending photos to another camera ....................................... 80 Receiving photos from another camera ................................. 81 Sending photos via Bluetooth ........................................... 82 Appendixes ............................................................................ 83 Settings menu ................................................................... 84 Accessing the settings menu ................................................ 84 Sound settings ................................................................... 85 Display settings ................................................................... 85 Camera settings .................................................................. 86 Error messages ................................................................. 88 Camera maintenance ........................................................ 89 Cleaning your camera .......................................................... 89 About memory cards ........................................................... 90 About the battery ................................................................. 90 Before contacting a service center .................................... 92 Camera specications ....................................................... 94 FCC notice ........................................................................ 98 Index ................................................................................. 99 10 Basic functions Learn about your cameras layout, icons, and basic functions for shooting, and how to transfer les to and from your computer. Unpacking 12 Camera layout 13 Icons 15 Turning your camera on or off 16 Using the touch screen 17 Setting the touch screen 19 Selecting a display type 19 Setting the touch vibration or sound 19 Taking photos 20 Zooming 21 Tips for getting a clearer photo 22 Unpacking Check your product box for the following items. Camera AC adapter/USB cable
(ADXX-XXXXXA)/(ADXX-XXXXXA) Rechargeable battery
(ADXX-XXXXXA) Optional accessories Camera case Strap
(Silver: ADXX-XXXXXA/
Black: ADXX-XXXXXA) Software CD-ROM
(ADXX-XXXXXB) A/V cable
(ADXX-XXXXXB) Memory card The illustrations may differ from your actual items. Quick Start Manual
(ADXX-XXXXXA) HDMI adapter
(ADXX-XXXXXA) Basic functions 12 Camera layout Before you start, familiarise yourself with your camera's parts and their functions. POWER button Shutter button Flash Microphone GPS antenna AF-assist light/timer lamp Lens Battery chamber cover Multifunction jack Accepts USB, A/V cable, or earphones Tripod mount Basic functions 13 Camera layout Touch screen Speaker Zoom button
Zoom in or out Zoom in on part of a photo or view les as thumbnails Playback button Status lamp
: When saving a photo or video, being read Blinking by a computer or printer, or out of focus Steady
: When connecting to a computer or in focus
Basic functions 14 Icons The icons displayed will change according to the mode you select or the options you set. A B C A. Status icons Icon Description Aperture and shutter speed Photo resolution Exposure value ISO speed White balance Face detection Burst mode Image adjustment (sharpness, contrast, saturation) Available number of photos Available recording time Internal memory
: Fully charged Memory card inserted
: Charging needed
: Partially charged Zoom ratio Voice memo Auto focus frame Camera shake Option set 1 (of 3) Current date and time Basic functions 15 B. Option icons (touch) Icon Description Flash option Auto focus option Timer option f Display type Image setting options
: Exposure value
: White balance
: ISO speed
: Face tone
: Face retouch
: Focus area option
: Face detection option
: Photo resolution
: Video resolution
: Photo quality
: Frame rate
: Exposure with ACB
: Video stabilizer
: Metering option
: Burst type
: Style effect
: Image adjustment (sharpness, contrast, saturation)
: Long time shutter
: Audio recording
: Another row of options Turning your camera on or off Learn how to start your camera. Rotate the lens cover to open. You can also press [POWER] with the lens cover open. Turning on your camera in Playback mode Press [Playback]. The camera turns on and accesses Playback mode immediately. Press and hold [Playback] to mute camera sounds. Basic functions 16 Using the touch screen Learn basic actions to use the touch screen. Use the supplied touch pen to touch or drag on the screen. Do not use other sharp objects, such as pens or pencils, to touch the screen. Doing so may damage the screen. Touching Touch an icon to select a menu or option.
When you touch or drag on the screen, discolorations will occur. It is not a malfunction but a characteristic of the touch screen. Touch or drag lightly to reduce these annoying effects. The touch screen may not recognize your touches correctly when:
you touch multiple items at the same time you use the camera in high humidity environments you use the camera with an LCD protection lm or another LCD accessory
If you touch the screen with your nger, the screen may not recognize your input. Dragging Drag left or right to scroll horizontally. EV
-2
-2
-1
-1 0 00
+1
+2
+2 Basic functions 17 Using the touch screen Using gestures Perform certain functions by drawing commands on the touch screen. Gesture Description
Draw a horizontal bar from left to right to view the next le. Draw a horizontal bar from right to left to view the previous le.
Draw an X to delete a photo. Basic functions 18 Setting the touch screen Learn how to change the basic settings for the touch screen according to your preferences. Selecting a display type In Shooting or Playback mode, select
an option. Full Option Description Full: Display the name of an option when you select an icon. Basic: Display icons without the name of an option. This option is available only in Playback mode. Hide: Hide icons on the screen if you perform no operations for 3 seconds (touch the screen to display icons again). Setting the touch vibration or sound Set whether your camera vibrates or emits a specied sound when you touch on the screen. 1 2 In Shooting or Playback mode, press [
Haptic&Sound. MENU]. Select Volume
:Medium Haptic Strength Haptic&Sound Shutter Sound Start Sound Off Haptic Sound All 1/2 3 4 Select an option. Option Off Haptic Sound All Description The camera will neither vibrate nor sound. The camera will vibrate. The camera will sound. The camera will vibrate and sound simultaneously. Press [
MENU] to return to the previous mode. Basic functions 19 Taking photos Learn basic actions to take photos easily and quickly in the Auto mode. 1 Make sure that the camera is in the a mode (Auto), the 2 cameras default shooting mode. Align your subject in the frame.
If not, select the mode icon
a. This mode minimizes user settings for quick, convenient shooting. Auto 3 Half-press [
Shutter] to focus. A green frame means the subject in focus. 4 Press [
Shutter] to take a photo. See page 29 for tips to get clearer photos. Basic functions 20 Taking photos Zooming You can shoot close-up photos by adjusting the zoom. Your camera has a 4.6X optical zoom and 5X digital zoom. By using both, you can zoom in up to 23 times. Push [Zoom] up to zoom in on your subject. Push [Zoom] down to zoom out. Zoom in Zoom ratio Zoom out Digital zoom If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom. Zoom indicator Digital range Optical range The digital zoom is not available when using scenes), and v modes and when used with Face Detection. It may take longer to save a photo when using the digital zoom. S, d, s (in some
Basic functions 21 Tips for getting a clearer photo Holding your camera correctly Reducing camera shake Make sure nothing is blocking the lens. Select the d mode to reduce camera shake digitally. (p. 36) Half-pressing the shutter button When is displayed Half-press [Shutter] and adjust the focus. Focus and exposure will be adjusted automatically. When shooting in the dark, avoid setting the ash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera still.
Use a tripod or set the ash option to Fill in. (p. 45) Set ISO speed options. (p. 46) The aperture value and shutter speed are automatically set. Camera shake
Focus frame
Shutter] to take the photo Press [
if displayed in green. Change the frame and half-press
[Shutter] again if displayed in red.
Basic functions 22 Preventing your subject from being out of focus It may be difcult to get your subject in focus when:
there is little contrast between the subject and background
(When your subject is wearing a color of clothing that is similar to the background) the light source behind the subject is too bright the subject is shiny the subject includes horizontal patterns, such as blinds the subject is not positioned in the center of the frame
When you take photos in low light Turn on the ash.
(p. 45)
When subjects are moving fast Use the continuous or motion capture function. (p. 58) Use the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to take your photo. Basic functions 23 Extended functions Learn how to take a photo by selecting a mode and how to record a video or voice memo. Shooting modes 26 Using the Smart Auto mode 26 Using the Scene mode 27 Using the Beauty Shot mode 27 Using the frame guide 28 Adjusting the exposure in the Night mode 29 Using the DIS mode 30 Using the Program mode 30 Recording a video 31 Recording voice memos 33 Recording a voice memo 33 Adding a voice memo to a photo 33 Shooting modes Take photos or record videos by selecting the best shooting mode for the conditions. Using the Smart Auto mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. 1 2 In Shooting mode, select a S. Align your subject in the frame.
The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen. Icon Description Appears when taking photos of landscapes with backlighting. Appears when taking portraits with backlighting. Appears when taking portraits. Appears when taking close-up photos. Appears when taking close-up photos of text. Appears when the camera and subject are stable for a while. Appears when taking photos of actively moving subjects. 3 4 Half-press [
Shutter] to focus. Press [
Shutter] to take the photo. Icon Description Appears when taking photos of landscapes. Appears when taking photos of bright backgrounds. Appears when taking photos of landscapes at night. This is available only when the ash is off. Appears when taking portraits at night.
Extended functions 25 S will not If the camera does not recognize a proper scene mode, change and the default settings will be used. Even if there is a face detected, the camera may not select a portrait mode depending on the subject's position or lighting. The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject. Even if you use a tripod, the on the subject's movement. mode may not be detected depending Shooting modes Using the Scene mode Take a photo with options preset for a specic scene. 1 2 In Shooting mode, select Select a scene. a s. This mode allows you to choose an appropriate scene for a variety of situations. Scene
For the Beauty Shot mode, see Using the Beauty Shot mode. For the Frame Guide mode, see Using the frame guide on page 34. For the Night mode, see Adjusting the exposure in the Night mode on page 35. 3 4 Align your subject in the frame and half-press [
to focus. Shutter]
Press [
Shutter] to take the photo. Using the Beauty Shot mode Take a photo of a person with options to hide facial imperfections. 1 2 To make the subject's skin tone appear lighter (face In Shooting mode, select a s
. only), select f
an option. Select a higher setting to make skin tone appear lighter. Level 2 Extended functions 26 Shooting modes To hide option.
facial imperfections, select f
an Select a higher setting to hide a greater number of imperfections. Level 1 Align your subject in the frame and half-press [
to focus. Shutter]
Press [
Shutter] to take the photo. The focus distance will be set to Auto Macro. 3 4 5 Using the frame guide When you want another person to take a photo of you, you can compose the scene with the frame guide feature. The frame guide will help the other person take a photo of you by showing the part of the pre-composed scene. 1 2 a s Align your subject in the frame and press [
Shutter]. Transparent guides will appear on the left and right of the frame. In Shooting mode, select
. Cancel Frame:Back 3 4 Ask another person to take a photo.
The person must align the subject in the frame by using the guides, and then press [Shutter] to take the photo. To cancel the guides, select
. Extended functions 27 Shooting modes Adjusting the exposure in the Night mode In the Night mode, you can catch brief ashes of light as curved streaks by extending the exposure. Use a slow shutter speed to extend the time until the shutter closes. Increase the aperture value to prevent overexposure. 1 2 f In Shooting mode, select a s
Aperture. Select
. Aperture Shutter Speed 3 Select an option. 4 f 5 Select
Shutter Speed. Select a value to adjust the shutter speed and select 6 7 Align your subject in the frame and half-press [
to focus. Shutter]
Press [
Shutter] to take the photo. Use a tripod to prevent your photos from blurring. Extended functions 28 Shooting modes Using the DIS mode Reduce camera shake and prevent blurred photos with Digital Image Stabilization (DIS) functions. Using the Program mode Set various options (except for shutter speed and aperture value) in the Program mode. 1 2 Set options. (For a list of options, refer to Shooting options.) In Shooting mode, select a p. After correction In Shooting mode, select a d. Align your subject in the frame and half-press [
to focus. Shutter]
Before correction 1 2 3 Press [
Shutter] to take the photo.
The digital zoom will not work in this mode. If your subject is moving rapidly, the photo may be blurry. 3 4 Align your subject in the frame and half-press [
to focus. Shutter]
Press [
Shutter] to take the photo. Extended functions 29 Shooting modes Recording a video Record videos of up to 2 hours in length. The recorded video is saved as an MPEG-4.AVI le. The zoom sound may be recorded if you use the zoom while recording a video. In Shooting mode, select a v. 1 2 f Select per second).
As the number of frames increases, action appears more natural, but the le size is increased.
a frame rate (the number of frames 30 FPS 3 f > Select Option Description
a sound option. Off: Record a video without sound. On: Record a video with sound. 4 f Select Option Description
a stabilizer option. Off: Record a video with the image stabilization function turned off. On: Record a video with the image stabilization function turned on to prevent your video from blurring. 5 6 7 Set other options as desired. (For options, refer to Shooting options.) Press [
Shutter] to start recording. Press [
Shutter] again to stop recording. Extended functions 30 Shooting modes To pause recording The camera allows you to pause temporarily while recording a video. With this function, you can record your favorite scenes as a single video. Select to pause while recording. Select it again to resume. Stop: Shutter Extended functions 31 Recording voice memos a p s d Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of shooting conditions. You will get the best sound quality when recording 40 cm away from the camera. Recording a voice memo 1 In Shooting mode, select f >
. Adding a voice memo to a photo 1 f > In Shooting mode, select
. Record Memo Press [
2 3 4 Shutter] to record. to resume. to pause and Select The available recording time will be displayed on the top of the screen. You can record voice memos of up to 10 hours in length. Press [
Shutter] to stop. Select to switch to Shooting mode. 2 3 Align your subject in the frame and take a photo.
You will begin recording a voice memo right after taking the photo. Record a short voice memo (10 seconds maximum).
Shutter] to stop recording a voice memo. Press [
Extended functions 32 Shooting options Learn about the options you can set in Shooting mode. Adjusting brightness and colour 47 Adjusting the exposure manually (EV) 47 Compensating for backlighting (ACB) 48 Changing the metering option 49 Selecting a light source (White balance) 50 Using burst modes 52 Improving your photos 53 Applying photo styles 53 Dening your own RGB tone 53 Adjusting your photos 54 Taking a shot with location information 55 Selecting a resolution and quality 35 Selecting a resolution 35 Selecting image quality 36 Using the timer 37 Shooting in the dark 39 Preventing red-eye 39 Using the ash 39 Adjusting the ISO speed 40 Changing the cameras focus 41 Using macro 41 Using auto focus 41 Using smart touch focus 42 Adjusting the focus area 43 Using face detection 44 Detecting faces 44 Taking a self portrait shot 45 Taking a smile shot 45 Detecting eye blinking 45 Using smart face recognition 46 Selecting a resolution and quality Learn how to change the image resolution and quality settings. S a p s d v Selecting a resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the le size will also increase. When recording a video:
1 2 Select an option. In the v mode, select f
. When taking a photo:
1 In Shooting mode, select select f >
.) Select an option. 2 f
. (In some modes, 800 X 592 3456 X 2592 Option Description 1280 X 720: Play back on an SDTV. 640 X 480: Play back on a general TV. 320 X 240: Post on a web page. Option Description 3968 X 2232: Print on A2 paper. 3264 X 2448: Print on A3 paper in wide ratio (3:2). 2592 X 1944: Print on A4 paper. 2048 X 1536: Print on A5 paper. 1024 X 768: Attach to email. Shooting options 34 Selecting a resolution and quality a p s d Selecting image quality Photos you take are compressed and saved in JPEG format. Higher quality images will result in larger sizes. 1 f
. (In some modes, In Shooting mode, select select f >
.) Select an option. 2 Fine Option Description Super Fine Fine Normal Shooting options 35 Using the timer S a p s d v Learn how to set the timer to delay shooting. 1 2 In Shooting mode, select Select an option. 3 Press [
Shutter] to start the timer. The AF-assist light/timer lamp blinks. The camera will automatically take a photo at the specied time.
Select the timer icon to cancel the timer. Depending on the selected face defection option, the timer is not available or some timer options are not available. Off Option Description Off: The timer is not active. 10 Sec: Take a photo in 10 seconds. 2 Sec: Take a photo in 2 seconds. Double: Take a photo in 10 seconds and take another in 2 seconds. Motion Timer: Detect your movement and then take a photo. (p. 44) The options may differ depending on the shooting mode. Shooting options 36
. 5 Pose for your photo while the AF-assist light/timer lamp is blinking.
The AF-assist light/timer lamp will stop blinking just before the camera automatically takes a photo. Using the timer Using the motion timer 1 In Shooting mode, select 2 3 Shutter]. Press [
4 Stand within 3 m from the camera within 6 seconds after pressing [Shutter]. Make a motion, such as waving your arms, to activate the timer.
The AF-assist light/timer lamp will start to blink rapidly when the camera detects you. The motion timer may not work when:
you are more than 3 m away from the camera your movements are too subtle there is too much light or backlight The detection range of the motion timer Shooting options 37 Shooting in the dark Learn how to take photos at night or in low light conditions. a p s Preventing red-eye If the ash res when you take a photo of a person in the dark, a red glow may appear in the eyes. To prevent this, select Red-eye or Red-eye Fix. S a p s Using the ash Use the ash when taking photos in the dark or when you need more light on your photos. 1 2 In Shooting mode, select Select an option. Off Option Description Off:
The ash will not re. Camera shake warning (
shooting in low light.
) will be displayed when Auto: The camera will select a proper ash setting for the detected scene in the S mode. Auto: The ash res automatically when the subject or background is dark. Shooting options 38 Shooting in the dark Option Description Red-eye*:
Fill in:
Slow Sync:
Red-eye Fix*:
The ash res when the subject or background is dark. The camera reduces red-eyes. The ash always res. Light intensity is adjusted automatically. The ash res and the shutter stays open longer. Select this when you want to capture ambient light to reveal more details in the background. Use a tripod to prevent your photos from blurring. The ash res when the subject or background is dark. The camera corrects red-eyes through its advanced software analysis.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the ash. Do not move until the ash res a second time.
Flash options are not available if you set burst options or select Self-Portrait or Blink Detection. Make sure that your subjects are within the recommended distance from the ash. (p. 98) If there is reected light or much dust in the air, tiny spots may appear on your photo. Shooting options 39 p Adjusting the ISO speed The ISO speed is the measure of a lms sensitivity to light as dened by the International Organization for Standardization (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the ash. 1 2 In Shooting mode, select f
. Select brightness of the subject and lighting. to use an appropriate ISO speed based on the Select an option.
Auto The higher ISO speed you select, the more image noise you may get. Changing the cameras focus Learn how to adjust the camera's focus according to your subjects. a p d v Using macro Use macro to take close-up photos of subjects, such as owers or insects. Refer to macro options in Using auto focus. a p d v Using auto focus To take sharp photos, select the appropriate focus according to your distance from the subject. 1 2 In Shooting mode, select Select an option.
Try to hold the camera very still to prevent blurry photos. Turn off the ash if the distance to the subject is less than 40 cm. Normal (AF) Option Description Normal (AF): Focus on a subject farther than 80 cm. Auto Macro: Focus on a subject farther than 5 cm
(farther than 50 cm when using zoom). Macro: Focus on a subject 5 - 80 cm (50 - 80 cm when using zoom). Super Macro: Focus on a subject between 3 to 8 cm. The options may differ depending on the shooting mode. Shooting options 40 Changing the cameras focus a p s d Using smart touch focus Smart touch AF allows you to track and auto focus on your subject, even when you are moving. Simply set the focus area to Smart Touch AF (p. 49) and touch the subject you want to track in the touch area (indicated by a frame). A focus frame will appear on the subject and will follow the subject as you move the camera. The color of the focus frame indicates the tracking and focus status:
White: Tracking the subject Green: Auto focus when you half-press [
Shutter]
If you do not touch any area on the screen, the focus frame will appear in the center of the screen. Tracking a subject may fail when:
the subject is too small the subject moves the subject is backlit or you are shooting in a dark place colors on the subject and the background are the same patterns on the subject and the background are the same the camera shakes excessively In these cases, the focus frame will appear as a white single-line
frame. If the camera fails to track the subject, you must reselect the subject to track. If the camera fails to x the focus, the focus frame will change to a red single-line frame. Shooting options 41 Changing the cameras focus a p s d Adjusting the focus area You can get clearer photos by selecting an appropriate focus area according to your subjects location in the scene. 1 2 In Shooting mode, select Select an option. f
. Center AF Option Description Center AF: Focus on the center (suitable when subjects are located in the center). Multi AF: Focus on one or more of 9 possible areas
(when the digital zoom is in use, the focus will change to Center AF). Smart Touch AF: Focus on and track the subject that you touch on the screen. The options may differ depending on the shooting mode. Shooting options 42 Using face detection a p s d If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.
In some scene modes, face detection is unavailable. Face detection may not be effective when:
the subject is far from the camera (The focus frame will appear orange for Smile Shot and Blink Detection) it is too bright or too dark the subject is not facing the camera the subject is wearing sunglasses or a mask the subject is in backlighting or the lighting condition is unstable the subjects facial expression changes remarkably
Face detection is not available when using a photo style. When you use the face detection option, the digital zoom will not work. Depending on the selected face defection option, the timer is not available or some timer options are not available. Detecting faces Your camera automatically detects human faces (up to 10 human faces). In Shooting mode, select f appears in a white focus frame and the rest of the faces appear in grey focus frames. The closest face
The closer you are to the subject, the quicker your camera will detect faces. Shooting options 43 Using face detection Taking a self portrait shot Take photos of yourself. The focus distance will be set to close-
up and your camera will emit a beep. Taking a smile shot The camera automatically releases the shutter when it detects a smiling face. In Shooting mode, select f smiles broadly, your camera can detect the smile more easily. When your subject
1 2 In Shooting mode, select f
. When your hear a quick beep, press [
Shutter]. To turn the beep on or off, select Self-Portrait in the sound settings. (p. 88) Detecting eye blinking If your camera detects closed eyes, it will automatically take 2 photos in succession. In Shooting mode, select f
Hold your camera still while When blink detection fails, message appears. Take another photo. Capturing is displayed on the screen. Picture taken with eyes closed. Shooting options 44 Using face detection Using smart face recognition The camera automatically registers faces that you frequently photograph (up to 10 people). This feature will automatically prioritize the focus on those faces. This feature is available only when you use a memory card.
The camera may recognize and register faces incorrectly depending on lighting conditions, remarkable changes in the subject's pose or face, and whether or not the subject is wearing glasses. The camera may recognize faces and display the level indicator, even though they have not been registered. You can view registered faces in order of priority while in Playback mode. (p. 63) Even though faces are registered successfully, they may not be classied in Playback mode. If the camera recognizes a new face when there are 10 registered faces, it will replace the face in the lowest priority with the new one. The camera can recognize up to 3 faces in one scene. When the camera does not recognize faces, it will still detect the faces without prioritizing them. You can manually register faces from photos you have already taken.
(p. 63) In Shooting mode, select f faces will be shown by the level indicator next to the frames. The priority of the
Shooting options 45 Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Adjusting the exposure manually (EV) Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. p d v 3 Select
. The adjusted exposure value will appear as shown below. Darker (-) 1 2 Neutral (0) Brighter (+) In Shooting mode, select f
. Select a value to adjust the exposure.
+: brighter, -: darker
Once you adjust the exposure, the setting will remain the same. You may need to change the exposure value later to avoid overexposure or underexposure. If you cannot decide on an appropriate exposure, select Exposure Bracket). The camera takes photos with different exposures:
normal, underexposed, and overexposed. (p. 58) AEB (Auto EV
-2
-2
-1
-1 0 00
+1
+2
+2 Shooting options 46 Adjusting brightness and color Compensating for backlighting (ACB) When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option. p Option Description Off: ACB is off. On: ACB is on. With ACB Without ACB 1 2 Select an option. In Shooting mode, select f > Off The ACB feature is always on in the This feature is not available when AEB is in use. a mode. Continuous, Motion Capture, or
. Shooting options 47 Adjusting brightness and color p d v Changing the metering option The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. 1
. (In the v f > In Shooting mode, select mode, select
.) 2 Select an option. Multi Option Description Multi:
Your camera divides the scene into several areas, and then measures the light intensity of each area. Suitable for general photos.
Option Description Spot:
Your camera measures only the light intensity of the very center of the frame. If a subject is not in the center of the scene, your photo may be improperly exposed. Suitable for a subject with backlighting.
Centerweighted:
Your camera averages the meter reading of the entire frame with emphasis placed on the center. Suitable for photos with subjects in the center of the frame.
Shooting options 48 Adjusting brightness and color Selecting a light source
(White balance) p d v The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the white balance, such as Auto WB, Daylight, Cloudy, or Tungsten. Auto WB
(Auto WB)
(Daylight)
(Cloudy)
(Tungsten) 1 2 In Shooting mode, select f
. Select an option. Icon Description Auto WB: Use automatic settings depending on the lighting conditions. Daylight: Select when taking outdoor photos on a sunny day. Cloudy: Select when taking outdoor photos on a cloudy day or in shadows. Fluorescent_H: Select when shooting under a daylight uorescent or three-way uorescent light. Fluorescent_L: Select when shooting under white uorescent light. Tungsten: Select when taking indoor photos under incandescent bulbs or halogen lamps. Custom Set: Use your pre-dened settings. Shooting options 49 Adjusting brightness and color Dening your own white balance 1 2 In Shooting mode, select Aim the lens at a piece of white paper. f 3 Press [
Shutter].
. Shooting options 50 Using burst modes p s It can be difcult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes. Option Description Motion Capture:
While you are pressing [Shutter], the camera takes VGA photos (6 photos per second; maximum of 30 photos). The camera automatically shows you the photos just taken and then saves them.
AEB:
Take 3 photos with different exposures: normal, underexposed, and overexposed. Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.
You can use the ash and timer and ACB only when you select Single. When you select VGA and the ISO speed will be set to Auto. Motion Capture, the resolution will be set to 1 2 In Shooting mode, select f >
. Select an option. Single Option Description Single: Take a single photo. Continuous:
While you are pressing [Shutter], the camera takes photos continuously. The maximum number of photos depends on the capacity of your memory card.
Shooting options 51 Improving your photos Learn how to improve your photos by applying photo styles or colors, or make some adjustments. Applying photo styles Apply different styles to your photos, such as Soft, Vivid, or Forest. a p s d v Dening your own RGB tone 1 From the photos style options, select
(R: Red, G: Green, B: Blue). 2 Select the amount of the selected color.
a color Vivid Forest Custom RGB Soft 1 2 In Shooting mode, select f > (once or twice) Select an option.
Select f
.) to dene your own RGB tone. (In some modes, Normal 3 Select
. Shooting options 52 Improving your photos p Adjusting your photos Adjust the sharpness, saturation, and contrast of your photos. 1 2 In Shooting mode, select f > twice
. Select an adjustment option.
: Sharpness
: Contrast
: Saturation 3 Contrast option
Description Decrease the color and brightness. Increase the color and brightness. Saturation option Description
Decrease the saturation. Increase the saturation. Select a value to adjust the selected item. Select 0 if you do not want to apply any effects. (suitable for printing) Sharpness
-2
-2
-1
-1 0
+1
+2
+2 Sharpness option Description
Soften the edges on your photos (suitable for editing the photos on your computer). Sharpen the edges to improve the clarity of your photos. This may also increase the noise on your photos. Shooting options 53 Taking a shot with location information Learn to take shots with location information using the GPS (Global Positioning System). If a photo has the location information, you can check the city where it has been taken and upload it to a website supporting the map service, such as Google Maps. 1 2 3 On for the GPS activation option. In Shooting mode, select Select Select 5
. Select a time for the GPS storage period.
If the camera fails to receive GPS signals, the last location information will be recorded onto the photos. However, if the camera still fails to receive GPS signals after the specied time, the location information will not be recorded onto the photos. 4 Select On for displaying GPS information. To initiate the GPS satellite information, select GPS Reset.
The Shooting mode will show the current city and country on the top right of the screen. However, the city and country will appear in English regardless of the display language. The camera will record the location information onto the photos. GPS icon status Color Green Red Yellow Grey Description The camera is receiving GPS signals. The camera is not receiving GPS signals. The camera has not received GPS signals and the GPS storage period has expired. The GPS feature is deactivated. Shooting options 54 Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your photo printer or TV. Playing back 57 Starting Playback mode 57 Viewing photos 61 Playing a video 63 Playing a voice memo 64 Editing a photo 65 Rotating a photo 65 Resizing photos 65 Editing color 66 Dening your own RGB tone 66 Applying a special effect 67 Correcting exposure problems 67 Creating a print order (DPOF) 68 Viewing les on a TV (HDTV) 69 Printing photos with a photo printer (PictBridge) 70 Playing back Learn actions to play back photos, videos, or voice memos, and managing les. Display in Playback mode Starting Playback mode View photos or play videos and voice memos stored in your camera. 1 Playback]. The most recent le you have taken or recorded will be displayed. If the camera is off, it will turn on. Press [
2 Draw a horizontal bar left or right to scroll through les.
< to view the previous le. Hold to view les quickly.
> to view the next le. Hold to view les quickly.
Select Select If you want to view les stored in the internal memory, remove your memory card. Icon Description Photo includes a voice memo v Video le Print order has been set (DPOF) Protected le Photo includes a registered face; Available only when you use a memory card Folder name File name Register a face (p. 63); Available only when you use a memory card Delete les (p. 65) Play a slide show (p. 67) Edit photos (p. 70) Select a display type (p. 18) Play videos or voice memos
(Video p. 68/Voice memo p. 69) Playback/Editing 56 Playing back Viewing les by category in Smart Album View and manage les by categories, such as date, le type, or week. 1 In Playback mode, select
a category.
2 3 4 Select a date, le type, weekday, color, or face.
< or > to scroll through dates, You can also touch and hold le types, weekdays, colors, or faces.
< or > to scroll through les. Select Select to return to the normal view. Type Date Colour Week Face Option Type Date Color Week Face Description View les by the le type. View les by the date they were saved. View les by the dominant color of the image. View les by the weekday they were saved. View les by recognized faces. (Up to 15 people) It may take some time for the camera to open Smart Album or to change the category and reorganize les. Playback/Editing 57 Playing back Viewing les as thumbnails Scan thumbnails of les. In Playback mode, push [Zoom] down to display 9 or 16 thumbnails (push [Zoom] up to return to the previous mode). Protecting les Protect your les from accidental deletion. MENU]. In Playback mode, press [
To select and protect les, 1 2 3 Protect Select. Select Select les you want to protect.
to select all les. to cancel your selection. Select Select To Scroll through les View a le Delete les Do this Select < or >. Select a thumbnail. Select or drag a le to
. (p. 65) 4 Select
. Playback/Editing 58 Playing back To protect all les, 1 2 Select Protect All Lock. In Playback mode, press [
MENU]. In Playback mode, press [
MENU]. To delete all les, 1 2 Select Delete All Yes. Deleting les Delete single les or all les at once. You cannot delete protected les. Alternate way to delete a le While viewing a le in Playback mode, draw an X on the screen. To delete a single le, 1 2 Select Yes to delete the le. In Playback mode, select a le
. To delete multiple les, 1 2 In Playback mode, select Select les you want to delete.
to select all les on the current screen. to cancel your selection. Select Select
Multiple Delete. 3 Select
Yes. Playback/Editing 59 Playing back Using the recycle bin If you activate the recycle bin, les you delete will be sent to the recycle bin instead of being deleted permanently. This applies to single les or selected les onlyif you choose to delete all les, those les will not be sent to the recycle bin. To activate the recycle bin, 1 2 In Playback mode, press [
Recycle Bin On. Select MENU]. In Playback mode, press [
Copying les to the memory card You can copy les from the internal memory to a memory card. 1 2 3
. Copy to Card. Yes to copy les. MENU]. Select Select To restore les from the recycle bin, 1 2 In Playback mode, press [
Recycle Bin Retrieve. Select MENU].
This function does not work for videos or voice memos. It may take longer to delete les when using the recycle bin function. If you format the internal memory, all les in the recycle folder will be deleted. The recycle bin will hold up to 10 MB of les. Once you exceed the 10 MB limit, the camera asks you whether to empty the recycle bin. Select Yes to empty the recycle bin or No to delete only the current le. Viewing photos View a photo by zooming in on part of a photo or view photos as a slide show. Enlarging a photo In Playback mode, push [Zoom] up to enlarge a photo (push [Zoom] down to reduce a photo). The enlarged area and zoom ratio are indicated on the top of the screen. The maximum zoom ratio may vary depending on the resolution. Select arrows to move the enlarged area. Playback/Editing 60 Playing back Icon Description Delete the le. Crop the enlarged photo (it will be saved as a new le). Go back to the original view. Starting a slide show You can apply effects and audio to your slide show. 1 2 In Playback mode, select Set a slide show effect. 3 Option Description Images: Select les for your slide show. Play Mode: Select whether or not to loop the slide show. Interval: Set the interval between photos.
is selected in the Effect This will be available when menu. When used with an effect option other than interval will be set to 1 sec.
, the
Music: Select background audio. Effect:
Select a transition effect. for no effects. Select to start the slide show. Select
Touch on the screen (except for option icons) to pause the slide show. Select to switch to Playback mode.
Playback/Editing 61 Playing back Playing a video You can play a video, capture an image from a video, or crop a video. 1 2 Use the following icons to control playback. In Playback mode, select a video
. Trimming a video during playback 1 Select begin and select
. at the point where you want the new video to 2 3 4 Select to resume playback. at the point where you want the new video to Select end and select
. Select Yes.
The original video should be at least 10 seconds long. The edited video will be saved as a new le. Icon
Description Scan backward. Pause or resume playback. Stop playback. Scan forward. Adjust volume or mute sound. Playback/Editing 62 Playing back Capturing an image during playback 1 at the point where you want to save a still Select image. 2 3 Select
. Select Yes. A captured image will have the same le size as the original video le and will be saved as a new le. Icon
Description Scan backward. Pause or resume playback. Stop playback. Scan forward. Adjust volume or mute sound. Playing a voice memo added to a photo 1 In Playback mode, select a photo that includes a voice memo
. Playing a voice memo 2 Use the following icons to control playback. Playing a voice memo 1 2 In Playback mode, select a voice memo
Use the following icons to control playback. Icon
Description Pause or resume playback. Stop playback. Adjust volume or mute sound. Playback/Editing 63 Editing a photo Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation. Edited photos will be saved as new les. Rotating a photo 1 2 Select
an option. In Playback mode, select a photo
In Playback mode, select a photo
. Resizing photos 1 2 Select
Select
an option. to save the photo as a start image. (p. 88)
. 2048 X 1536 Left 90 3 Select
. 3 Select
. Available options differ depending on the size of the selected photo. Playback/Editing 64 Editing a photo Editing color Apply a different color tone to the photo, such as Soft, Vivid, or Forest. Dening your own RGB tone 1 In Playback mode, select a photo 2 3 Select the amount of the color. Select
a color (R: Red, G: Green, B: Blue). Soft 1 2 Vivid Forest In Playback mode, select a photo
. Select
Select
an option. to dene your own RGB tone. Custom RGB 4 Select
. Normal 3 Select
. Playback/Editing 65 Editing a photo Applying a special effect Apply special effects to the photo, such as color lters or noise effects. 1 2 In Playback mode, select a photo
an option. Select
. Colour Filter Option Description Colour Filter: Change background colors to black and white to make the main subject stand out. Elegant: Apply effects to the photo to make it brighter and softer. Add Noise: Add noise to the photo to give it an aged look. 3 Select
. 3 4 Correcting exposure problems Adjust ACB (Auto Contrast Balance), brightness, contrast, or saturation; or remove red-eye. In Playback mode, select a photo
an adjustment option. Adjusting an image 1 2 Select
: Brightness
: Contrast
: Saturation Select a value to adjust the selected item.
(-: less or +: more) Select
. Playback/Editing 66 Editing a photo In Playback mode, select a photo Adjusting ACB (Auto Contrast Balance) 1 2 3
. Select Select
. Creating a print order (DPOF) Select photos to be printed and set options, such as number of copies or paper size.
The memory card can be taken to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. Wide photos may print with the left and right edges cut off, so be aware of the dimensions of your photos. You cannot set the DPOF for the photos stored in the internal memory. 1 2 In Playback mode, press [
MENU]. Select
.DPOF Select. To print all les, select All and skip to step 5. 3 4 5 6 7 Select photos to print.
Select Select to select all les. to cancel your selection. Select
. Set DPOF options. Option Description Select whether to print the photos as thumbnails. Specify the size of the print. Select
, or . to set the number of copies. Select
. If you specify the print size, you can print photos only with DPOF 1.1-compatible printers. Playback/Editing 67 Viewing les on a TV (HDTV) Play back photos or videos by connecting your camera to a TV using the provided A/V cable. 1 Select a video signal output according to your country or region. (p. 90) 6 2 3 4 5 Turn off your camera and TV. Connect your camera to your TV using the A/V cable. Video Audio Turn on your TV and select the video output mode using the TV remote control. Turn on your camera and press [
Playback]. View photos or play videos using the touch screen on your camera.
Locate the option you want on the TV screen and touch where the option is located on the camera screen. When a pointer appears on the option on the TV screen, select the camera screen. on
On some TVs, digital noise may occur or part of an image may not appear. Images may not appear centered on the TV screen depending on your TV settings. You can capture photos or videos while the camera is connected to a TV. Playback/Editing 68 Printing photos with a photo printer (PictBridge) Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer. 1 With the printer on, connect your camera to the printer with the USB cable. Select an option. Option 4 Current Photo Description Print the currently selected photo. Skip to step 6. Selected Photos Print the photos you want. All Photos Print all photos. Skip to step 6. Turn on your camera.
The printer recognizes the camera automatically.
If the camera fails to connect, a pop-up window will appear. Select Printer. If your printer has the mass storage feature, you must rst set the USB mode to Printer in the settings menu. (p. 90) 5 6 7 Select Select
< or > to scroll to a photo to print.
, or . to set the number of copies and select
. If you selected to print the photos you want, repeat steps 5-6 for all photos to print.
Select
Yes to conrm. Printing starts. Select Cancel to cancel printing. Select
to print. Select settings on page 76. to set printing options. See Conguring print 2 3 Playback/Editing 69 Printing photos with a photo printer (PictBridge) Conguring print settings Option Description Size: Specify the size of the print. Layout: Create thumbnail prints. Type: Select the type of paper. Quality: Set the printing quality. Date: Set to print the date. File Name: Set to print the name of the le. Reset: Reset the print options. Some options are not supported by some printers. Playback/Editing 70 Wireless network/Bluetooth Learn to use several functions using wireless local area networks (WLANs) and the Bluetooth feature. With the WLAN, you can upload and send photos and videos to websites or email addresses. You can also share photos with devices that support the Digital Living Network Alliance (DLNA) standard. With the Bluetooth feature, you can send your photos to other Samsung mobile phones or PDAs. Connecting to a WLAN and conguring network settings 73 Connecting to a WLAN automatically 73 Connecting to a WLAN manually 74 Storing your information 74 Storing email addresses 75 Setting the le size to share 75 Checking information 75 Entering text 76 Using photo or video sharing websites 77 Accessing a website 77 Uploading photos 78 Sending photos via email 79 Sending photos to the DLNA devices 80 Viewing photos on a TV screen 80 Viewing photos on another device 81 Sending photos to another camera 81 Receiving photos from another camera 82 Sending photos via Bluetooth 83 Connecting to a WLAN and conguring network settings Learn to activate and connect to a wireless LAN via an access point (AP) when you are in a range of a WLAN. You can also congure network settings and learn how to enter text. Your device uses a non-harmonised frequency and is intended for use in the following countries:
Connecting to a WLAN automatically 1 2 In Shooting mode, select [Network]
Access Point Setting.
n. The camera will search for and display available WLAN connections. Select
3 Select a WLAN. Icon Description AD-HOC Security WPS
The camera will connect to the WLAN. If the network has the WPS prole, select screen. If the network requires a password, continue with the next step. WPS on the next Select network proles and options. Option Authentication Encryption Type Description Select a network authentication. Select an encryption type. 4 Select the password input eld. Enter a password and select O. 5 6 7 O. Select
The camera will connect to the WLAN.
For network proles and a password, contact your network administrator or network service provider. When connecting to the network, you will be charged according to your contract with your network service provider. Wireless network/Bluetooth 72 Connecting to a WLAN and conguring network settings Connecting to a WLAN manually 1 2 In Shooting mode, select [Network]
Access Point Setting.
n. Select
The camera will search for and display available WLAN connections. 3 4 5 6 7 Select a WLAN. Select IP Setting and Manual. Select the network proles. Description Option Enter the static IP address. IP Enter the subnet mask. Subnet Mask Enter the gateway. Gateway 4 5 6 7 Enter values and select O. When you are nished, select
O. The camera will connect to the WLAN. In Shooting mode, select [Network]
n. Storing your information 1 2 3 User Setting. Select Select the name input eld and enter your name. For information about entering text, refer to page xx.
When you are nished, select O. Select the email input le and enter your email address. When you are nished, select O. Select
. For network proles and a password, contact your network administrator or network service provider. Wireless network/Bluetooth 73 Connecting to a WLAN and conguring network settings In Shooting mode, select [Network]
Storing email addresses Store up to 10 email addresses in your camera. You can use them when you send your photos via email. 1 2 3 4 Select the name input eld and enter a name.
For information about entering text, refer to page xx. Email Address.
n. Select Select
. 5 6 7 8 When you are nished, select O. Select the email input le and enter an email address. When you are nished, select O. Select
. Setting the le size to share Set the le size you will share with other DNLA devices. You can select either the original size or a limit of 2MB. 1 2 3 In Shooting mode, select [Network]
DLNA Image Size. Select a size.
n. Select Checking information Check the Mac address and serial number of your camera to register it with the Samsung website. 1 2 In Shooting mode, select [Network]
Device Information.
n. Select Wireless network/Bluetooth 74 Connecting to a WLAN and conguring network settings Entering text To enter text when storing your information or email addresses, select the appropriate letters, symbols, and numbers. When you are nished, select O. Icon Description Enter small letters. Enter numbers and symbols. Enter a space. Delete the last letter. Store the displayed text. Wireless network/Bluetooth 75 Using photo or video sharing websites Accessing a website Upload your photos to photo sharing websites, such as Zoom-in, Flickr, Picasa, and Facebook. You can also upload your videos to video sharing websites, such as YouTube. 1 In Shooting mode, select [Network]
The camera automatically connects to the last WLAN connection. If the camera has not connected to the WLAN, it automatically searches for available WLAN connections. For details, refer to page xx.
. 2 3 Select a website. Enter your login ID and password, and select Login. Icons on a website Icon Description Home Previous page Next page Stop Refresh Close Wireless network/Bluetooth 76 Using photo or video sharing websites Uploading photos 1 2 Select
. Drag photos to the selection area and select Add. The number of photos you can upload may differ depending on the selected website. 3 Select an album and enter a title, and then select Upload. Wireless network/Bluetooth 77 Sending photos via email 1 2
. In Shooting mode, select [Network]
The camera automatically connects to the last WLAN connection. If the camera has not connected to the WLAN, it automatically searches for available WLAN connections. For details, refer to page xx.
3 4 Select email addresses and select O. Drag photos to the selection area and select
Send. The photos will be sent to the selected email addresses. Select
. For information about storing email addresses, refer to page xx.
The email address you entered in the user setting appears.
(Refer to page xx.) If you have sent photos via email, the recent recipient addresses appear. To enter an email address manually, select
. Wireless network/Bluetooth 78 Sending photos to the DLNA devices DLNA is an international technology standard for sharing media les between networked devices in your home. With this technology, you can view your photos on a widescreen TV or another device, and send or receive photos to or from cameras of the same model. 4 On the TV, search for the camera and browse the shared photos.
Your cameras name is what you entered in the user setting.
(Refer to page xx.) For information about searching for the camera and browsing the photos on the TV, refer to the TV user manual.
Viewing photos on a TV screen View your photos on a TV that supports the DLNA standard. 1 In Shooting mode, select [Network]
. The camera automatically connects to the last WLAN connection. If the camera has not connected to the WLAN, it automatically searches for the available WLAN connections. For details, refer to page xx.
2 3 Select All or Selected. Selected, select the photos you want to If you selected view on the TV screen.
The photos will be shared with the TV. AP Wireless network/Bluetooth 79 Sending photos to the DLNA devices Viewing photos on another device 1 In Shooting mode, select [Network]
The camera automatically connects to the last WLAN connection. If the camera has not connected to the WLAN, it automatically searches for the available WLAN connections. For details, refer to page xx. 2 3 Select a device that will play the photos. Drag a photo to the selection area. 3 4 5
The photos will appear on the devices screen. To view other photos, drag them to the selection area on your camera. Sending photos to another camera Send your photos to another camera of the same model. 1 2 In Shooting mode, select [Network]
a. Send. Select
The camera generates a password and displays it on the screen while waiting for a connection with the receiving camera. On the receiving camera, select the name of the sending camera.
The sending cameras name is what you entered in the user setting. (Refer to page xx.) Enter the password (4 digits) on the receiving camera.
The selection area automatically appears on the sending camera. Drag photos to the selection area.
The photos will be sent to the receiving camera. Wireless network/Bluetooth 80 Sending photos to the DLNA devices Select In Shooting mode, select [Network]
Receiving photos from another camera 1 2 3 4 Select the name of the sending camera. Enter the sending cameras password and select
Receive.
a. When the sending camera transmits photos, they will appear on the receiving camera. O. Wireless network/Bluetooth 81 Sending photos via Bluetooth Bluetooth is a wireless protocol for exchanging data over short distances. With Bluetooth, you can quickly send photos to other Samsung mobile phones or PDAs. 1 2 In Shooting mode, select [Network]
Yes.
. Select
The camera will search for and display Bluetooth-enabled devices. If you have searched for the Bluetooth-enabled devices, a list of Bluetooth-enabled devices appears. Select Research to search again. 3 4 5 Select a Bluetooth-enabled device. Enter a password (4~6 digits) and select O. Drag photos to the selection area.
The photos will be sent to the selected device. The photo size will be resized to 640x480 (VGA). Wireless network/Bluetooth 82 Appendixes Refer to settings, error messages, specications, and maintenance tips. Settings menu 84 Accessing the settings menu 84 Sound settings 85 Display settings 85 Camera settings 86 Error messages 88 Camera maintenance 89 Cleaning your camera 89 About memory cards 90 About the battery 90 Before contacting a service center 92 Camera specications 94 FCC notice 98 Index 99 Settings menu Learn about various options to congure your camera's settings. Accessing the settings menu 1 2 In Shooting or Playback mode, press [
Select a menu. MENU]. Volume Haptic Strength Haptic&Sound Shutter Sound Start Sound
:Medium
:High
:All
:1
:Off 1/2 Icon Description Sound settings: Set various camera sounds and volume. (p. 88) Display settings: Customize the display settings, such as language and brightness. (p. 88) Camera settings: Change the settings for the camera system, such as memory format, default le name, and USB mode. (p. 89) 3 4 Select an option and save your settings. Volume Haptic Strength Haptic&Sound Shutter Sound Off Low Medium High Start Sound
:Off 1/2 Select to return to the previous screen. Appendixes 84 Settings menu Sound settings Display settings
* Default
* Default Item Volume Haptic Strength Haptic&Sound Shutter Sound Start Sound AF Sound Description Adjust the volume of any sound.
(Off, Low, Medium*, High) Select a level of the vibration when you touch on the screen. (Low, Medium, High*) In low temperatures, the vibration level may feel lower than your actual setting. It is not a malfunction. Select whether the camera will vibrate or sound when you touch on the screen. (Off, Haptic, Sound, All*) Select a sound to be emitted when pressing the shutter button. (Off, 1*, 2, 3) Select a sound to be emitted when turning on your camera. (Off*, 1, 2, 3) Set to emit a sound to be emitted when half-
pressing the shutter button. (Off, On*) Item Language Function Description Start Image
Description Select a language for the display text. Display a brief description of an option or menu.
(Off, On*) Set a start image to display when the camera turns on.
*: Display no start image.
: Display a default image stored in the internal Off Logo memory. User Image
: Display the image you want. (p. 70) Only one start image will be saved in the internal memory. If you select a new photo as a start image or reset your camera, the current image will be deleted. A wide image or image in 3:2 ratio cannot be set as a start image.
Display Brightness Quick View Power Save Adjust the brightness of the screen. (Auto*, Dark, Normal, Bright) Normal is xed in Playback mode even if Auto is selected. Set the duration for reviewing a captured image or video before returning to Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec) If you perform no operations for 30 seconds, the camera automatically switches to Power save mode
(press any button to deactivate the Power save mode). (Off*, On) Appendixes 85 Settings menu Camera settings
* Default
* Default Description Specify how to name les.
Reset
: Set the le number to start from 0001 when inserting a new memory card, formatting a memory card, or deleting all les. Series le number when inserting a new memory card, formatting a memory card, or deleting all les.
*: Set the le number to follow the previous
The default name of the rst folder is 100SSCAM and the default name of the rst le is SDC10001. The le number increases one by one from SDC10001 to SDC19999. The folder number increases one by one from 100SSCAM to 999SSCAM. The maximum number of les that can be stored in one folder is 9999. The camera denes le names according to the Digital rule for Camera File system (DCF) standard. If you change the names of les intentionally, the camera may not play back the les. Item Format Reset Date&Time Time Zone Description Format the internal memory and the memory card
(all les-including the protected les-will be deleted).
(No, Yes) If you use a memory card used with cameras from different manufacturers or a memory card reader, or one formatted on a computer, your camera may read the card incorrectly. Format the card before using it. Reset menus and shooting options (date and time, language, and video output settings will not be reset).
(No, Yes) Set the date and time and select a date format.
(yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy, Off*) Select a region and set the daylight-saving time
(DST). Item File No. Appendixes 86 Settings menu Item Imprint Auto Power Off
* Default
* Default Description Set whether to display the date and time on your photos when printing. (Off*, Date, Date & Time) Item
The date and time will be displayed on the bottom-
right corner of the photo in yellow. The date and time may not be printed on some printer models. If you select time will not be displayed. in the s mode, the date and Set the camera to automatically turn off when you are not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
Your settings will not change after replacing the battery. The camera will not automatically turn off when:
it is connected to a computer or printer you are playing a slide show or videos you are recording a voice memo Video Out
Description Set the video signal output according to your region.
*: USA, Canada, Japan, Korea, Taiwan, NTSC Mexico. PAL
(supports only BDGHI): Australia, Austria, Belgium, China, Denmark, Finland, Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. Set the function to use via a USB connection with a computer or printer.
*: Set your camera to select a USB mode USB
Auto automatically. Computer for transferring les. Printer printing les.
: Connect your camera to a computer
: Connect your camera to a printer for AF Lamp Set an assistant light to help you focus in dark places.
(Off, On*) Appendixes 87 Error messages When the following error messages appear, try these remedies. Error message Card Error DCF Full Error File Error Low Battery Low Light Memory Full No Image File Turn off your camera and then turn it on again. Remove your memory card and insert it again. Format your memory card. (p. 89) Suggested remedies
File names do not match the DCF standard. Transfer the les on the memory card to your computer and format the card. (p. 89) Delete the damaged le or contact a service center. Insert a charged battery or recharge the battery. Turn on the ash. (p. 45) Delete unnecessary les or insert a new memory card. Take photos or insert a memory card that has some photos. Appendixes 88 Camera maintenance Cleaning your camera Camera lens and touch screen Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently. Camera body Wipe gently with a soft, dry cloth.
Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. Make sure to close the lens cover before cleaning. Appendixes 89 About the battery Use only Samsung-approved batteries. Battery specications Mode Type Cell capacity Voltage SLB-0937 Lithium-ion battery 900 mAh 3.7 V Charging time
(when the camera is switched off) Approx. 150 min Camera maintenance About memory cards Memory cards you can use You can use SD (Secure Digital) memory cards. Memory card capacity The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB SD card:
Fine Normal 30 FPS 20 FPS 15 FPS Size P h o t o s Super ne 194 221 264 343 532 1,716 376 426 510 637 895 2,059 546 611 744 870 1,211 2,376
V i d e o s
Approx. 35' 54"
Approx. 47' 24"
* The recordable time may vary if you use the zoom.
Approx. 30' 9"
Approx. 69' 52"
Approx. 92' 12"
Appendixes 90 Camera maintenance Battery life Average time /
Number of photos Test conditions
(when the battery is fully charged) Photos Approx. 130 min/
Approx. 260 This is measured under the following conditions: in the a mode, 9M resolution, Fine quality. 1. Set the ash option to Fill in, take a single shot, and zoom in or out. 2. Set the ash option to Off, take a single shot, and zoom in or out. 3. Perform steps 1 and 2 for 30 seconds and repeat for 5 minutes. Then turn off the camera for 1 minute. 4. Repeat steps 1 to 3. Videos Approx. 130 min Record videos at 800 x 592 resolution and 20 fps.
The gures above are measured by Samsungs standards and may differ depending on actual usage. Several videos were recorded in succession to determine the total recording time. Notes about charging the battery
If the indicator light is off, make sure that the battery is inserted correctly. Turn off your camera when charging. Turn on your camera after charging the battery for more than 10 minutes. Using the ash or recording videos depletes the battery quickly. Charge the battery until the indicator light turns green. If the indicator light blinks in red or does not illuminate, reconnect the cable, or remove the battery and insert it again. If you charge the battery when it is warm, the indicator light may turn orange. Charging will start when the battery cools down. Notes about charging with a computer connected
Use only the provided USB cable. The battery may not be charged when:
you use a USB hub other USB devices are connected to your computer you connect the cable to the port on the front side of your computer the USB port of your computer does not support the power output standard (5 V, 500 mA)
Appendixes 91 Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted the troubleshooting solution and are still having problems with your device, contact your local dealer or service center. Situation Cannot turn on the camera The power turns off suddenly The camera is losing battery power quickly Suggested remedies
Make sure that the battery is inserted. Make sure that the battery is inserted correctly. Charge the battery. Charge the battery. Your camera may be in Power save mode. (p. 88) The camera may turn off to prevent the memory card from being damaged due to an impact. Turn on your camera again. The battery may lose power more quickly in low temperatures (below 0 C). Keep the battery warm by putting it into your pocket. Using the ash or recording videos depletes the battery quickly. Recharge if needed. Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly.
Situation Cannot take photos The camera freezes Suggested remedies
There is no space on the memory card. Delete unnecessary les or insert a new card. Format the memory card. (p. 89) The memory card is defective. Get a new memory card. Make sure that the camera is switched on. Charge the battery. Make sure that the battery is inserted correctly.
Remove the battery and insert it again. Off. The ash option may be set to
(p. 45) You cannot use the ash in the some s modes. d, v, or The ash does not work
The ash res unexpectedly The date and time are incorrect The touch screen or buttons do not work The ash may re due to static electricity. This is not a malfunction of the camera. Set the date and time in the display settings menu. Remove the battery and insert it again. Appendixes 92 Before contacting a service center Situation The memory card has an error Cannot play back les The photo is blurry The colors in the photo do not match the actual scene The photo is too bright Suggested remedies The memory card has not been reset. Format the card. (p. 89) If you change the name of a le, your camera may not play the le (the name of the le should meet the DCF standard). If you encounter this situation, play back les on your computer.
Make sure that the focus option you set is suitable for close-up shots. (p. 47) Make sure that the subject is within range of the ash. (p. 98) Make sure that the lens is clean. If not, clean the lens. (p. 92) An incorrect white balance can create unrealistic color. Select the proper white balance option to suit the light source.
(p. 56)
Your photo is overexposed. Adjust the exposure value. (p. 53) Turn off the ash. (p. 45) Situation The TV does not display your photos Your computer does not recognize your camera Suggested remedies
Make sure that the camera is correctly connected to the external monitor with the A/V cable. Make sure that your memory card contains photos. Make sure that the USB cable is connected correctly. Make sure that your camera is switched on. Make sure that you are using a supported operating system.
Your computer disconnects the camera while transferring les The le transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again. Appendixes 93 Camera specications Image sensor Type 1/2.3" CCD Effective pixels Approx. 12.2 mega-pixels Total pixels Approx. 12.4 mega-pixels Range Normal Macro Wide (W) Tele (T) 80 cm - innity 10 cm - 80 cm 50 cm - 80 cm Auto Macro 10 cm - innity 50 cm - innity Super Macro 1 cm - 10 cm
Lens Focal length F-stop range Digital zoom Display Type Feature Focusing Type Schneider - KREUZNACH 5X Inner Zoom f = 6.3 - 31.5 mm
(35 mm lm equivalent: 35 - 175 mm) F3.6 (W) - F4.8 (T)
Still image mode: 1.0X - 5.0X Play mode: 1.0X - 10.8X (depending on image size) Shutter speed
Exposure Auto: 1/8 - 1/2,000 sec. Program: 1 - 1/2,000 sec. Night: 18 - 1/2,000 sec. Firework: 4 sec. 3.5" TFT VGA Full touch screen panel TTL auto focus (Multi AF, Center AF, Face Recognition AF, Face Detection AF, Smart Touch AF, One touch Shooting) Control Metering Program AE Multi, Spot, Center-weighted Compensation 2EV (1/3EV steps) ISO equivalent Auto, 80, 100, 200, 400, 800, 1600, 3200, 6400 Flash Mode Range Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix
Wide: 0.2 m - 4.6 m (ISO Auto) Tele: 0.5 m - 2.3 m (ISO Auto) Recharging time Approx. 4 sec. Appendixes 94 Camera specications Shake reduction Dual IS [Optical Image Stabilisation (OIS) + Digtal Image Stabilisation (DIS)]
Effect Shooting mode
Photo Style Selector: Normal, Soft, Vivid, Forest, Retro, Cool, Calm, Classic, Negative, Custom RGB Image Adjust: Sharpness, Contrast, Saturation Videos White Balance Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set Shooting Photos
Modes: Smart Auto (Portrait, Night Portrait, Backlight Portrait, Backlight, Landscape, White, Motion, Tripod, Night, Macro, Macro Text, Blue Sky, Sunset Sky, Natural Portrait, Natural Green), Auto, Program, DUAL IS, Movie, Scene
(Night, Portrait, Children, Landscape, Text, Close Up, Sunset, Dawn, Backlight, Firework, Beach & Snow, Frame Guide, Beauty Shot) Drive: Single, Continuous, Motion Capture, AEB Timer: 2 sec,10 sec, Double, Motion Timer Playback Type Edit Effect
Format: MPEG-4 with audio (Max recording time: 2 hours) Size: 1280 x 720 (30 FPS, 15 FPS) High Quality, 1280 x 720 (30 FPS, 15 FPS) Standard Quality, 640 x 480 (30 FPS, 15 FPS), 320 x 240 (60 FPS, 30 FPS, 15 FPS) 5X Optical zoom with sound recording Frame rate: 60 FPS, 30 FPS, 15 FPS Photo style selector, White balance Video editing (embedded): Pause during recording, Still image capture, Time trimming Single image, Thumbnails, Multi slide show, Movie clip, Smart Album Resize, Rotate, Photo Style Selector, Image Adjust
Photo Style Selector: Normal, Soft, Vivid, Forest, Retro, Cool, Calm, Classic, Negative, Custom RGB Image Adjust: ACB, Brightness, Contrast, Saturation Funny Face: Face Retouch, Red-eye Fix, Snow, Mosaic, Highlight
Voice recording
Voice Recording (Max. 10 hours ) Voice Memo in a photo (Max. 10 sec.) Appendixes 95 Camera specications Dimensions (W x H x D) 98 x 59 x 17.2 mm Weight 124.2 g (without battery and memory card) Operating temperature 0 - 40 C Operating humidity 5 - 85 %
Software Multi stage Specications are subject to change without prior notice. Appendixes 97 FCC notice
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION:
Changes or modications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.
Declaration of Conformity Trade Name Model No.
: Samsung Electronics America, Inc.
: Samsung CL65 Responsible Party
: Samsung Electronics America, Inc. Address
: 105 Challenger Road Ridgeeld Park NJ Telephone No.
: 1-800-SAMSUNG (726-7864) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Handheld only Samsung Eco-mark It is Samsungs own symbol mark is used to effectively communicate Samsungs environmental friendly product activities to the consumers. The mark represents Samsungs continuous effort on development of environmental conscious products. Appendixes 98 Index A ACB 47 Adjusting Brightness 66 Contrast in Playback mode 66 in Shooting mode 53 Saturation in Playback mode 66 in Shooting mode 53 Sharpness 53 AF Lamp 87 AF Sound 85 Aperture 28 Auto Contrast Balance (ACB) 47 Auto mode 20 B Battery Charging 91 Life 91 Specications 90 Battery gauge 15 Digital Image Stabilisation 29 Smile shot 44 Beauty Shot mode 26 Blink detection 44 Burst Digital zoom 21 DIS mode 29 Facial brightness 26 Facial imperfections 27 Display brightness 85 Flash Auto Exposure Bracket (AEB) 51 Continous 51 Motion capture 51 Display type 19 DPOF 67 Dragging 17 C Camera shake 22 Capturing an image 63 Cleaning Body 89 Display 89 Lens 89 Color tone 65 D Date and time 86 Deleting les 59 E Editing 64 Enlarging 60 Error messages 88 Exposure 46 F Face detection Blink detection 44 Face detection 43 Self-portrait 44 Smart face recognition 45 Appendixes 99 Auto 38 Fill in 39 Off 38 Red-eye 39 Red-eye x 39 Slow sync 39 Focus area Center AF 42 Multi AF 42 Smart Touch AF 42 Focus distance Auto macro 40 Macro 40 Normal (AF) 40 Super macro 40 Frame guide 27 Frame rate 30 Function description 85 Index G Gestures 18 H Half-pressing 7 I Icons 15 Imprint 87 ISO speed 39 L Light source (White balance) 49 Long time shutter 28 M Macro 40 Maintenance 89 Memory card Capacity 90 SD 90 Metering Center 48 Multi 48 Spot 48 Motion timer 37 Movie mode 30 Muting Camera 16 Video 30 P Photo quality 35 Photo styles 52 Playback button 16 Playback mode 56 Printing photos 69 Print order 67 Program mode 29 Protecting les 58 Q Quick View 85 R Recording Video 30 Voice memo 32 Recycle bin 60 Red-eye 38 Reset 86 Resizing 64 Resolution Photo 34 Video 34 RGB tone in Playback mode 65 in Shooting mode 52 Rotating 64 S Scene mode 26 Appendixes 100 Self-portrait 44 Service center 92 Settings Accessing 84 Camera 86 Display 85 Sound 85 Shooting mode Auto 20 DIS 29 Movie 30 Program 29 Scene 26 Smart Auto 25 Shutter speed 28 Slide show 61 Smart Auto mode 25 Smart face recognition 45 Smart Touch AF 41 Smile shot 44 Special effects Add noise 66 Recording 32 Volume 85 W White balance 49 Z Zooming 21 Index Color lter 66 Elegant 66 Start image 85 T Timer 36 Touching 17 Touch screen 14 Touch vibration 19 V Video Playing 62 Recording 30 Video Out 87 Viewing les as thumbnails 58 on TV 68 Slide show 61 Voice memo Playing 63 Appendixes 101 Please refer to the warranty that came with your product or visit our website http://www.samsung.com for after-sales service or inquiries. The CE Mark is a Directive conformity mark of the European Community (EC)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-06-23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2009-06-23
|
||||
1 2 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0027908797
|
||||
1 2 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 2 |
Pine Brook, New Jersey 07058
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
A3L
|
||||
1 2 | Equipment Product Code |
CL65
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J**** C******
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
973-8********
|
||||
1 2 | Fax Number |
973-8********
|
||||
1 2 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/07/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Camera | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. This device is for handheld operation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SGS Korea Co., Ltd.
|
||||
1 2 | Name |
J****** C******
|
||||
1 2 |
E**** L********
|
|||||
1 2 | Telephone Number |
82-31********
|
||||
1 2 |
82-31********
|
|||||
1 2 | Fax Number |
82-31********
|
||||
1 2 |
82-31********
|
|||||
1 2 |
j******@sgs.com
|
|||||
1 2 |
e******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 CC | 2402.00000000 | 2480.00000000 | 0.0009000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 20 CC | 2412.00000000 | 2462.00000000 | 0.0940000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC