| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual 1 | Users Manual | 3.22 MiB | ||||
| 1 |
|
Users Manual 2 | Users Manual | 3.01 MiB | ||||
| 1 | Block Diagram | |||||||
| 1 | External Photos | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | Internal Photos | |||||||
| 1 | Test Report | |||||||
| 1 | Test Setup Photos |
| 1 | Users Manual 1 | Users Manual | 3.22 MiB |
DLPTV DLPTV 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca I N S T R U C T I O N M A N U A L HL-P5085W/HL-P5685W BP68-00352A-00 This device is a Class B digital apparatus. Table of Contents Your New Wide TV ............................................................................................6 Replacing the Lamp................................................................................................6 List of Features .......................................................................................................8 Accessories ...........................................................................................................8 Front Panel Buttons .................................................................................................9 Front Panel Information Window............................................................................10 Rear Panel Jacks ..................................................................................................11 Remote Control ....................................................................................................12 Installing Batteries in the Remote Control.....................................................13 Connections .....................................................................................................16 Connecting VHF and UHF Antennas.......................................................................16 Antennas with 300-ohm Flat Twin Leads .....................................................16 Antennas with 75-ohm Round Leads...........................................................16 Separate VHF and UHF Antennas ..............................................................17 Connecting Cable TV and VCR..............................................................................18 Cable without a Cable Box .......................................................................18 Cable with a Cable Box that Descrambles All Channels ...............................18 Connecting a Cable Converter Box............................................................19 Connecting a Cable Converter Box and a VCR ...........................................19 Connecting a Camcorder......................................................................................20 Connecting a DVD Player .....................................................................................21 Connecting to Y,PB,PR ...............................................................................21 Connecting to Audio and Video Jacks ........................................................21 Connecting a DTV Set-Top Box ..............................................................................22 Connecting to Y,PB,PR ...............................................................................22 Connecting to DVI (Digital Visual Interface) .................................................22 Connecting to R,G,B.................................................................................23 Connecting to HDMI (High Definition Multimedia Interface) ..........................23 Operation........................................................................................................26 Turning the TV On and Off....................................................................................26 Viewing the Menus and On-Screen Displays ...........................................................26 Selecting the Menu Language................................................................................27 Selecting the Antenna Input...................................................................................27 Memorizing the Channels .....................................................................................28 Adding and Erasing Channels...............................................................................29 Changing Channels..............................................................................................30 Selecting Your Favorite Channels ...........................................................................31 Scanning the Channels .........................................................................................32 Labeling the Channels ..........................................................................................33 Picture Control .....................................................................................................34 Sound Control .....................................................................................................36 Setting the Clock..................................................................................................38 Setting the Timers.................................................................................................39 Viewing an External Signal Source ........................................................................41 Assigning Names to External Input Mode ...............................................................42 Freezing the Current Picture ..................................................................................43 Remote Control VCR/DVD Buttons..........................................................................43 Special Features ...............................................................................................46 Customizing Your Remote Control ..........................................................................46 Remote Control Codes..........................................................................................47 Fine Tuning Channels ...........................................................................................48 LNA (Low Noise Amplifier)....................................................................................49 Selecting the Color Tone .......................................................................................50 Changing the Picture Size.....................................................................................51 Digital Noise Reduction ........................................................................................52 DNIeTM (Digital Natural Image engine)
...........................................................53 Setting the MCC (My Color Control) Mode .............................................................54 Setting the Film Mode...........................................................................................56 Viewing Picture-In-Picture.......................................................................................57 Activating the PIP .....................................................................................57 Selecting an External Source .....................................................................58 Swapping the Sub Picture and Main Picture................................................59 Changing the Size of the Sub Picture .........................................................60 Changing the Location of the Sub Picture....................................................61 Changing the Channel of the Sub Picture....................................................62 Selecting the Sound Source .......................................................................63 Setting the SRS TSXT.............................................................................................64 Choosing a Multi-Channel Sound (MTS) track..........................................................65 Auto Volume........................................................................................................66 Enjoying the Sound of External Speakers ................................................................67 Using the V-Chip (USA).........................................................................................68 Viewing Closed Caption Information ......................................................................74 Setting the Blue Screen Mode................................................................................76 Setting The On/Off Melody ..................................................................................77 Using the Color Weakness Enhancement Feature.....................................................78 PC Display.......................................................................................................80 Using Your TV as a Computer (PC) Display .............................................................80 How to Connect Your PC to the TV.............................................................80 Setting up Your PC Software (Based on Widows 98) ...................................81 Display Modes.........................................................................................82 Adjusting the Picture Quality .................................................................................83 Changing the Picture Position ................................................................................84 Adjusting the Picture Quality and Position Automatically...........................................85 Initializing the Picture Settings................................................................................86 Changing the Picture Size (PC Mode).....................................................................87 Appendix.........................................................................................................90 Troubleshooting ...................................................................................................90 Cleaning and Maintaining Your TV ........................................................................91 Using Your TV in Another Country..........................................................................91 Specifications ......................................................................................................91 2 3 Your New Wide TV S A M S U N G Your New Wide TV Replacing the Lamp Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front
(Timer, Lamp, & Temp.) are flashing. Check before lamp replacement 1. The lamp must be the same code number and type. 2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. Caution 1. Replace with the correct code numbered lamp to avoid damage to the TV. 2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside the cover as it may cause poor screen quality, electric shock or fire. 4. Do not place the old lamp near flammable objects or within the reach of children. For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves. 1 Unplug TV, then remove the screw. 2 Remove the Lamp cover. 3 Remove the screws securing the Lamp. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order. NOTES Be sure the replacement Lamp is the same type. After replacing the lamp, align the lamp cover with the groove and secure the screw. The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit). 6 7 Your New Wide TV List of Features Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features:
Easy-to-operate remote control Easy-to-use on-screen menu system you can access from the side panel or remote control Automatic timer to turn the TV on and off at any time you choose Adjustable picture and sound settings and the ability to memorize your favorite settings Automatic channel tuning for up to 181 channels A special filter to reduce or eliminate reception problems Fine tuning control for the sharpest picture possible A built-in multi-channel sound decoder for stereo and bilingual listening Built-in, dual channel speakers A special sleep timer Picture-in-Picture capability that lets you watch two channels at once Widescreen TV with adjustable image size Life-like clear images provided by DNle technology MCC (My Color Control) Mode for corresponding with your color style Color weakness Mode Accessories Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer. Warranty Cards (2)/
Registration Card (1) Instruction Manual/
Safety Guide Manual/
Quick Guide Manual Remote Control
(BP59-00048B)/
AAA Batteries
(4301-000103) 8 Front Panel Buttons The buttons on the front panel control your TVs basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. Standby state. Aim the remote control towards this spot on the TV. Press to turn the TV on and off. Auto Timer ON/OFF has been set and the set will automatically be turned on in about 25 seconds. Press to switch between viewing TV programs and signals from connected components. Press to lower or raise the volume and to select items when using the on-screen menu. Press to change channels and move between items on the on-screen menu. Press to see the on-screen menu. Press to activate (or change) a particular item. 9 Your New Wide TV Front Panel Information Window Your TV is turned on normally. Lamp may be defective. Please contact a certified technician. Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off. A cooling fan inside the set is not operating normally. NOTES It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. The TV has a fan to keep the inside lamp from overheating. Youll occasionally hear it working. Rear Panel Jacks Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and three set of component video input jacks on the rear panel of your TV. For more information, please see Connections. ANTENNA terminals Two independent cables or antennas can be connected to these terminals. Use ANT 1 IN and ANT 2 IN terminals to receive a signal from VHF/UHF antennas or your cable system. Use the ANT 1 OUT terminal to send the signal being received by the ANT 1 IN terminal out to another component (such as a Cable Set-Top Box). The PIP channel can be received only when a signal source is connected to ANT 1 IN. S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS VCR or DVD player. VIDEO/AUDIO INPUT jacks (VCR1, VCR2) Connect video/audio signals from external sources, such as a VCR or DVD players. VIDEO/AUDIO OUTPUT jacks Sends a video signal from the TV to an external source, such as a VCR. Note: It is available only in RF, Video and S-Video modes. Component1, 2 jacks (Y, PB, PR, L, R) Use these jacks to connect the component video/audio signals from a DVD player or a set top box when using the component video input jacks. PC AUDIO INPUT jacks Connect these to the audio output jacks on your PC. PC VIDEO INPUT jack Connect these to the video output jack on your PC . DVI (Digital Video Interface) AUDIO INPUT jacks Connect to the digital audio output jacks for device with DVI output. DVI (Digital Video Interface) VIDEO INPUT jack Connect to the digital video output jack for device with DVI output. HDMI (High Definition Multimedia Interface) VIDEO/AUDIO INPUT jack Connect to the HDMI jack for device with HDMI output. SERVICE This jack is for repair and software upgrades. 10 11 Your New Wide TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your Set-Top box, VCR, Cable box or DVD player. See pages 46~47 for details. Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you wont be using the remote control for a long time, remove the batteries and store them in a cool dry place. 1. POWER Turns the TV on and off. 2. S.MODE Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings.) 3. P.MODE Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.) 4. +100 Press to select cable channels over 100 on TV. 5. VOL +, VOL -
Press to increase or decrease the volume. 6. MUTE Press to mute the TV sound. 7. FAV.CH (Favorite Channel) Press to switch between your favorite channels. 8. MENU Displays the main on-screen menu. 9. STILL Press to stop the action during a particular scene. Press again to resume normal video. 10. P.SIZE Press to change the picture size. 11. MODE Selects a target device to be controlled by the Samsung remote control (i.e., TV, STB, VCR, CABLE, or DVD). 12. PRE-CH Tunes to the previous channel. 13. TV/VIDEO Press to display all of the available video sources (i.e., TV, Set-Top box, VCR, DVD, DTV, PC). 14. CH , CH Press to change channels. 15. INFO Press to display information on the TV screen. 16. EXIT Press to exit the menu. 17. L, M, , , ENTER Press to select highlight up, down, left, or right. While using the on-screen menus, press the ENTER to activate (or change) a particular item. 18. MTS (Multichannel Television Stereo) Press to choose Stereo, Mono or SAP (Secondary Audio Program). 19. SRS Activates TruSurround. 20. ADD/DEL Press to add or erase channels in the TVs memory. Use the ADD/DEL button to memorize and erase the fine tuning after fine tuning channels. 21. SLEEP Press to select a preset time interval for automatic shutoff. 22. PIP (Picture In Picture) Activates PIP. 23. SET Used during set up of this remote control, so that it will work compatibly with other devices
(Set-Top box, VCR, Cable box, DVD, etc.) 24. DNIe (Digital Natural Image engine) Activates DNIe. 1 Slide the back cover all the way out to open the battery compartment of the remote control. 2 Install two AAA size batteries. Make sure to match the + and ends of the batteries with the diagram inside the compartment. 3 Slide the cover back into place. 25. PIP Controls SIZE; Press to select the size of PIP window. SWAP; Press to exchange the video signal that is currently displayed on the main screen with the signal in the PIP window. CH
; Press to display the available channels in sequence. (These buttons change channels in the PIP window only.)
26. VCR/DVD Controls Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward. 27. RESET If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again. 12 13 Connections S A M S U N G Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the ANT 1 IN terminal on the rear panel. Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adapter into the ANT 1 IN terminal on the rear panel. Antennas with 75-ohm Round Leads If your antenna looks like this: it is an antenna with 75-ohm round leads. 1 Plug the antenna lead into the ANT 1 IN terminal on the rear panel. 16 17 Connections Connecting Cable TV and VCR You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Connecting a Cable Converter Box This connection allows you to watch cable and premium channels. You should keep your TV selected to ANT 1 IN so that you can use the TV features. When viewing premium channels, select ANT 2 IN and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables. Cable without a Cable Box If you want to connect cable, and you do not need to use a cable box:
From Cable 1 Plug the incoming cable into the ANT 1 IN terminal on the rear panel. Cable with a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled ANT OUT, VHF OUT or simply, OUT. 2 Connect the other end of this cable to the ANT 1 IN terminal on the rear panel. NOTES When you use a converter box with your TV, there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels. The output from ANT 1 OUT is available when select Ant.2 in the Antenna channel menu. Cable converter box Connecting a Cable Converter Box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to ANT 1 IN so that you can use the TVs features. When viewing premium channels or recording with the VCR, select ANT 2 IN
(whichever channel is vacant in your area), then use the converter box to change channels. TV Rear Panel From Cable Cable converter box Stereo VCR Caution: If you want to record one channel while watching another channel, a splitter
(not included) must be added between the cable and ANT 1 IN. One output of the splitter goes to ANT 1 OUT and the second output is connected to IN on the cable converter box. If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a S-VHS VCR, use the S-Video connections and remove the video cable. Do not connect the video cable and the S-Video cable to video1 simultaneously. When you use a converter box with your TV there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels. 18 19 Connections Connecting a Camcorder The rear panel jacks on your TV make it easy to connect a camcorder to your TV. You can use your camcorder to view tapes without using a VCR. Camcorder TV Rear Panel Camcorder Output Jacks camcorder. They are usually found on the side or back of the camcorder. 1 Locate the A/V output jacks on the 2 Connect a set of audio cables between the AV (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the camcorder. If you have mono camcorder, connect L(mono) to camcorder audio out using only one audio cable. 3 Connect a video cable between the AV
(1 or 2) VIDEO IN (or S-VIDEO IN) jack on the TV and the VIDEO OUT jack on the camcorder. The audio-
video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y,PB,PR 1 Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 To enable Component video viewing, connect a set of video cables between the COMPONENT
(1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PR or Y/CB/CR) OUT jacks on the DVD player. Note: For an explanation of Component video, see your DVD player's owner's manual. DVD Player TV Rear Panel Incoming Cable or Antenna Connecting to audio and video jacks 1 Connect a set of audio cables between the AUDIO IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the DVD player. TV Rear Panel DVD Player 2 Connect a video cable between the VIDEO IN (1 or 2) jack on the TV and the VIDEO OUT jack on the DVD player. Incoming Cable or Antenna 20 21 Connections Connecting a DTV Set-Top Box Connecting to Y,PB,PR 1 Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. 2 Connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO
(Y/PB/PR or Y/CB/CR) OUT jacks on the Set-Top Box. Note: For an explanation of Component video, see your Set Top Box owner's manual. Incoming Cable or Antenna TV Rear Panel DTV Set-Top Box Connecting to DVI (Digital Visual Interface) 1 Connect a set of audio cables between the DVI AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. TV Rear Panel 2 Connect a video cable between the DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box. Incoming Cable or Antenna DTV Set-Top Box Connecting to R,G,B 1 Connect a set of audio cables between the PC AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. 2 Connect a video cable between the PC IN jack on the TV and the R.G.B OUT jack on the Set-Top Box. TV Rear Panel Incoming Cable or Antenna DTV Set-Top Box Connecting to HDMI (High Definition Multimedia Interface) 1 Connect a HDMI cable between the HDMI IN jack on the TV and the HDMI OUT jack on the Set-Top Box. TV Rear Panel NOTE Please check if the power of HDMI source is on, in case that you fail to select HDMI from the Source List even after you connected the cable of HDMI source (DTV Set-Top Box, DVD, etc.) to TV. Incoming Cable or Antenna DTV Set-Top Box 22 23 Operation S A M S U N G Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the ////ENTER on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TVs side panel buttons. Viewing the Menus 1 Press the MENU button. The main menu is displayed. There are five menu groups:
Input, Picture, Sound, Channel and Setup. 2 Press the or button to select to an item you want in the menu. Press the , or ENTER button to display, change, or use the selected items. Use the ENTER button to enter items in the menu. 3 Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input
: TV Source List Edit Name Move Enter Exit Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Viewing the Display Press the INFO button on the remote control. The TV displays the current channel, the status of certain picture and sound settings and the current time. Air 12 Signal V-Chip Picture Sound SRS TSXT MTS
- - : - - am Mono Dynamic Standard Stereo Stereo Selecting the Menu Language Choose a language for the on-screen menus: English, Spanish or French. 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the ENTER button to select Language. Press the or button to select the appropriate language, then press ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English English Espaol Franais
: Off
: On Move Enter Return Selecting the Antenna Input You can connect to two different signal sources by choosing the antenna input
(1 or 2). 1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the ENTER button to select Antenna. Press the or button to select Ant.1 or Ant.2, then press ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Channel
: Ant.1 Ant.1
: Air Ant.2 Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return 26 27 Operation Memorizing the Channels Your TV can memorize and store all of the available channels for both off-air (antenna) and cable channels. After the available channels are memorized, use the CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual). and CH Selecting the Video Signal Source Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV
(i.e., an antenna or a cable system). Input Picture Sound Channel Setup Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Channel
: Ant.1 Air STD
: Air HRC IRC Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return 1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the or button to select Air/CATV, then press the ENTER button. If you are connected to an antenna, press the or button to select Air. If you connected cable, press the or button to select the type of cable system: STD, HRC or IRC. Press the EXIT button to exit. NOTES STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to Storing Channels in Memory. Subscription cable services require service-specific requirement for viewing. Storing Channels in Memory (Automatic Method) First, select the correct signal source (Air, STD, HRC or IRC) as described on the previous page. 1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the or button to select Auto Program, then press the ENTER button. Press the ENTER button to start the auto program. The TV begins memorizing all of the available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Auto Program Start Enter Return Adding and Erasing Channels You can add channels that were not memorized or delete unwanted channels from memory. 1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the or button to select Add/Delete, then press the ENTER button. Repeatedly pressing the ENTER button will alternate between add channel and delete channel. Press the CH number buttons) to switch to the appropriate channel, then repeat above. button (or or CH Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Add/Delete Air 12 Not In Memory Add Change Enter Return Press the EXIT button to exit. Alternate method Simply press the ADD/DEL button on the remote control to add or delete channels. 28 29 Operation Changing Channels You can change channels on your TV by using the CH selection using the number buttons. You can use the number buttons to tune to any channel (even one that has been erased or has not been memorized). buttons, or by direct and CH Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control. or CH button to change channels. Using the Channel Buttons Press the CH When you press the CH channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized. button, the TV changes or CH Using the Number Buttons Press the number buttons to go directly to a channel. When you use the number buttons, you can directly select channels that were either erased or not memorized. For example, to select channel 27, press the 2, then 7. The TV will change channels when you press the second number. To change to single-digit channels (09) faster, press the 0 before the single digit. (For channel 4, press the 0, then 4.) To select a channel over 100, press the +100 button. (For channel 122, press the +100 button, then 2, then 2.) Using the Previous Channel Press the PRE-CH button. The TV changes to the last channel you were watching. To Store Your Favorite Channels:
1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the or button to select Favorite Channels, then press the ENTER button. Press the or button to select a channel, then press the ENTER button. Press the ENTER button again to deselect the selected channel. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Favorite Channels Air 2 Air 3 Air 4 Air 5 Air 6 Air 7 Air 8
M Move Enter Return To View Your Favorite Channels:
Press the FAV.CH button repeatedly to jump from one favorite channel to another. NOTE Only memorized channels can be set as Favorite channels. 30 31 Operation Scanning the Channels The TV automatically scan all of the channels it has memorized. 1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the or button to select Scan, then press the ENTER button. The TV scans all of the channels memorized. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Channel L More LNA Scan
: On Move Enter Return Scan Air 3 Air 4 Return Enter Return NOTE When the ANT 2 IN mode is selected, the channel scan function works on the main picture only. Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., CBS, ESPN, PBS2, CNN1, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear next to the channel number. button to tune to the channel that Input Picture Sound Channel Setup Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Name Air 2 Air 3 Air 4 Air 5 Air 6 L A
M
M Clear Clear Clear Clear Clear Move Adjust Return Name Input Picture Sound Channel Setup Air 2 Air 3 Air 4 Air 5 Air 6 CNN2
M Move Clear Clear Clear Clear Clear Enter Return or CH will be labeled. 1 Press the CH 2 Press the MENU button. Press the or button to select Channel, then press the ENTER button. Press the or button to select Name, then press the ENTER button. 3 Press the /// button to move to the channel to be assigned to a new name, then press the ENTER button. Press the or button to select a letter, a number or a blank. (Results in this sequence: A...Z, , blank, 0...9, -). 4 Press the button to switch to the next field, which will be selected. Select a second letter or digit pressing or button, as above. Repeat the process to select the last two digits. When you have finished, press the ENTER button. To erase the assigned new name, select Clear by pressing the ///
button, then press the ENTER button. Press the EXIT button to exit. NOTE If you add or delete the TV channel, the labeled channels list will also be added or deleted. 32 33 Operation Picture Control You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color and Tint according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.) Customizing the Picture 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the ENTER button to select Mode. 3 Press the or button to select a particular item, then press the ENTER button. Press the or button to increase or decrease the value of a particular item. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Mode
: Standard 90 50 50 60 50 Mode Contrast Brightness Sharpness Color Tint Reset 50 Move Enter Return Contrast L M 90 NOTE Tint doesnt operate in PC, DVI, HDMI or 480p-Component or higher modes. Resetting the Picture Settings to the Factory Defaults You can return to the factory default picture settings. 4 Press the MENU button to display the Mode menu. Press the or button to select Reset, then press the ENTER button. The previously adjusted picture settings will be reset to the factory defaults. Input Picture Sound Channel Setup Mode
: Standard 90 50 50 60 50 Mode Contrast Brightness Sharpness Color Tint Reset 50 Move Enter Return Using Automatic Picture Settings Your TV has automatic picture settings (Dynamic, Standard and Cinema) that are preset at the factory. You can activate either Dynamic, Standard or Cinema by pressing the P.MODE button (or by making a selection from the menu). Or, you can select Custom which automatically recalls your personalized picture settings. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Mode
: Standard 90 50 50 60 50 Mode Contrast Brightness Sharpness Color Tint Reset 50 Move Enter Return Mode Dynamic
: Standard Standard Cinema 90 50 50 60 50 Mode Contrast Brightness Sharpness Color Tint Reset 50 Move Enter Return 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the ENTER button to select Mode. 3 Press the ENTER button again to select Mode. Press the or button to select a particular item, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the P.MODE button on the remote control repeatedly to select one of the standard picture settings. Standard Choose Dynamic for viewing the TV during the day or when there is a bright light in the room. Choose Standard for the standard factory settings. Choose Cinema when viewing a movie. 34 35 Operation Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound. Press the MUTE button on the remote control. The message Mute is displayed and the sound cuts off. To turn mute off press the MUTE button again or, press either the VOL+ or VOL button. Mute Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. See next page.) 1 Press the MENU button. Press the or button to select Sound, then press the ENTER button. 2 Press the or button to select Equalizer, then press the ENTER button. Continued... Input Picture Sound Channel Setup Input Picture Sound Channel Setup Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return 3 Press the or button to select a particular item to be changed. Press the or button to increase or decrease the value of a particular item. Press the EXIT button to exit. Input Picture Sound Channel Setup Equalizer R
0
0
L Balance 100Hz 300Hz 1KHz 3KHz 10KHz
Move Adjust Return Using Automatic Sound Settings Your TV has automatic sound settings (Standard, Music, Movie and Speech) that are preset at the factory. You can activate these sound settings by pressing the S.MODE button (or by making a selection from the menu), or you can select Custom, which automatically recalls your personalized sound settings. 1 Press the MENU button. Press the or button to select Sound, then press the ENTER button. 2 Press the ENTER button to select Mode. Press the or button to select a particular item, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the S.MODE button on the remote control repeatedly to select one of the standard sound settings. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard Standard Music
: Off Movie
: Stereo Speech
: Off Custom
: Off Move Enter Return Standard Choose Standard for the standard factory settings. Choose Music when watching music videos or concerts. Choose Movie when watching movies. Choose Speech when watching a show that is mostly dialogue (i.e., news). Choose Custom to recall your personalized settings. 36 37 Operation Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Setting the Timers This TV can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the TVs clock, as described previously. 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Press the or button to select Time, then press the ENTER button. 2 Press the ENTER button to select Clock Set. 3 Press the or button to move to Hour, Min or am/pm. Set the clock you want by pressing the or button, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Time Clock Set Sleep Timer On Timer Off Timer
- - : - - am Off Off Off Move Enter Return Clock Set Hour Min am/pm L 12 M 00 am Move Adjust Return NOTE The current time will appear every time you press the INFO button. Absent Power Off When you set the timer On, your television will eventually be turned off, if you do not operate any controls during the 3 hours after the TV is turned on by timer. This function is available in only the timer On mode and will prevent a leakage accident or overheating, caused by your TV left on for a long time due to the timer On (when you are away on holiday, for example). Setting the On/Off Timer 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select Time, then press the ENTER button. Press the or button to select On Timer, then press the ENTER button. 3 Press the or button to adjust Hour, then press the button to move to the next step. Set other items using the same method as above. When finished, press the MENU button to return. 4 Press the or button to select Off Timer, then press the ENTER button. 5 Press the or button to adjust Hour, then press the button to move to the next step. Set other items using the same method as above. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Time Clock Set Sleep Timer On Timer Off Timer 10 : 30 am Off Off Off Move Enter Return On Timer Hour Min am/pm L 12 M Ch 03 00 am Vol. Activation 10 No Move Adjust Return Time Clock Set Sleep Timer On Timer Off Timer 10 : 30 am 06 : 30 am Off Off Move Enter Return Off Timer Hour Min am/pm Activation L 12 M 00 am No Move Adjust Return 38 39 Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top box and the TV source (broadcast or cable). Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Time Clock Set Sleep Timer On Timer Off Timer 10 : 30 am 06 : 30 am 11 : 30 pm Off Move Enter Return Clock Set Sleep Timer On Timer Off Timer Time 10 : 30 am Off 06 : 30 am 11 : 30 pm Off 30 60 90 120 150 180 Move Enter Return 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select Time, then press the ENTER button. Press the or button to select Sleep Timer, then press the ENTER button. 3 Press the or button to select Sleep Timer, then press the ENTER button. Press the or button to select the preset time you want, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears
(any of the preset values from 30 Min. to 180 Min.). 30 Min. NOTE If no signal is received for 15 minutes, the TV will be automatically turned off. Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select Input. 2 Press the ENTER button to select Source List. Press the or button to select a signal source, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the TV/VIDEO button on the remote control repeatedly to select an external signal source. Input
: TV Source List Edit Name Move Enter Return Source List TV
AV1
AV2
S-Video1 S-Video2
Component1 : - - - -
Component2 : - - - -
M More Move Enter Return Input Picture Sound Channel Setup Input Picture Sound Channel Setup AV1 40 41 Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. 1 Press the MENU button. Press the ENTER button to select Input. 2 Press the or button to to select Edit Name, then press the ENTER button. 3 Press the or button to select a signal source, then press the ENTER button. Press the or button to select an external device, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input
: TV Source List Edit Name Move Enter Return Input
: TV Source List Edit Name Move Enter Return Edit Name
AV1
AV2
S-Video1 S-Video2
Component1 : - - - -
Component2 : - - - -
PC
VCR DVD Cable STB HD STB Satellite STB AV Receiver M M More Move Enter Return Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the STILL button. To return to normal viewing, press it again. NOTE In the PIP mode, the main and sub pictures are stilled at the same time. Remote Control VCR/DVD Buttons Flip the cover of the remote control up to access buttons that can control the tape functions of a connected VCR or DVD, including Rewind, Stop, Play/Pause and Fast Forward. Slide the cover of your remote control unit for access to the tape function controls. Press the appropriate buttons to control your VCR or DVD. 42 43 Special Features S A M S U N G Special Features Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). NOTE The remote control might not be compatible with all VCRs, DVD players and Cable boxes. Remote Control Codes VCR Codes Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR
(CABLE or DVD) mode. The remote control has five modes: TV, STB, VCR, CABLE and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a 0. (If more than one code listed, try the first one.) 5 Press the POWER button. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). NOTES When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE and FF) will still operate your VCR (or DVD player). When your remote control is in the STB, VCR, CABLE or DVD mode, the volume buttons still control your TVs volume. Cable Box Codes DVD Codes 46 47 Special Features Fine Tuning Channels The Fine Tuning function lets you manually adjust the TVs tuner if you have difficulty tuning channels. LNA (Low Noise Amplifier) When a weak broadcast signal causes unclear noisy picture the LNA feature improves the picture quality by setting to On. If you experience noise on a certain channel, set the LNA to On or Off for this channel, to obtain the optimum picture. channel you want to fine tune. 1 Using the number buttons on the remote control, select the 2 Press the MENU button.
: Ant.1
: Air Channel Input Press the or button to select Channel, then press the ENTER button. Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Picture Sound Channel Setup Input Picture Sound Channel Setup 3 Press the or button to select Fine Tune, then press the ENTER button. 4 Press the or button to adjust the fine tuning. Fine Tune Air 12 3 To store the fine tuning setting in the TVs memory, press the ENTER button. The symbol * is displayed. To reset the fine tuning to 0, select Reset by pressing the or button, then press the ENTER button. Press the EXIT button to exit. Reset Move Adjust Save Return Fine Tune Air 12*
3 Reset Move Enter Return Fine Tune Air 12 0 Reset Move Enter Return 1 Press the MENU button. Press the or button to select Channel, then press the ENTER button. 2 Press the or button to select LNA, then press the ENTER button. 3 Press the or button to select On or Off, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Channel
: Ant.1
: Air Antenna Air/CATV Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return Channel L More LNA Scan
: Off Move Enter Return Channel L More LNA Scan
: Off Off On Move Enter Return NOTE This function works in ANT 1 IN mode only (not available in ANT 2 IN mode). 48 49 Special Features Selecting the Color Tone 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select Color Tone, then press the ENTER button. 3 Press the or button to select Cool2, Cool1, Normal, Warm1 or Warm2, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard Cool2
: Warm1 Cool1 Normal Warm1 Warm2
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return NOTE Not available in the Cinema picture mode. Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. Press the or button to select Size, then press the ENTER button. 2 Press the or button to select the screen format you want, then press the ENTER button. Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Size Input Picture Sound Channel Setup Input Picture Sound Wide Panorama Zoom1 Zoom2 4:3 Press the EXIT button to exit. Channel Setup Move Enter Return Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. Wide: Sets the picture to 16:9 wide mode. Panorama: Use this mode for the wide aspect ratio of a panoramic picture. Zoom1: Magnifies the size of the picture on screen. You can also move the picture on screen using the scroll function. Press the or button to scroll the picture. Zoom2: Magnifies the size of the picture more than Zoom1. You can also move the picture on screen using the scroll function. Press the or button to scroll the picture. 4:3: Sets the picture to 4:3 normal mode. This is a standard TV screen size. NOTES You can select only Wide, 4:3 screen size in the Component(480p, 720p, 1080i) Mode. With PIP On, the screen automatically becomes wide in the Antenna, AV (1~3), S-Video (1~3) or Component (480i) mode. With PIP Off, it returns to original screen size. The picture size cant be changed when the PIP is active in the TV or AV mode. 50 51
| 1 | Users Manual 2 | Users Manual | 3.01 MiB |
Special Features Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. DNIeTM (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm presents brighter, clearer, much detailed image. DNIeTM technology will fit every signals into your eyes. 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select Digital NR, then press the ENTER button. 3 Press the or button to select Off or On, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off Off
: On On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select DNIe, then press the ENTER button. 3 Press the or button to select Off, Demo or On, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On Off Demo On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings. On: Switches on the DNIe mode. Off: Switches off the DNIe mode. Demo: The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. DNIe Demo DNIe On DNIe Off 52 53 Special Features Setting the MCC (My Color Control) Mode MCC allows users to adjust colors to according to their preferences, by adjusting skin, sky, and grass tones using the predefined settings (Turkish Blue, Emerald Green, Indian Pink, Standard, Custom) without affecting other colors on the screen. Using the Easy Control Menu 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select MCC, then press the ENTER button. 3 Press the ENTER button to select Easy Control. Press the or button to select one of the picture settings you want. The original picture (before adjustment) is shown on the left side, while the selected mode is shown on the right side. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return MCC Easy Control Detail Control
: Turkish Blue Move Enter Return Original Turkish Blue NOTE Changing the settings in the Detail Control menu (see next page) will automatically set the MCC mode to Custom. Press the ENTER button to accept the selected mode. Press the EXIT button to exit. Easy Control Turkish Blue Emerald Green Indian Pink Move Enter Return Turkish Blue: Emphasizing Clear Blues. Feel the clear sun shine on the blue Mediterranean sea. Emerald Green: Emphasizing Mild Greens. Feel the translucent, romantic turquoise sea. Indian Pink: Emphasizing Warm Skin Colors. Standard: Standard Picture Custom Settings 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. Press the or button to select MCC, then press the ENTER button. 2 Press the or button to select Detail Control, then press the ENTER button. 3 Press the or button to select one of the MCC color you want, then press the ENTER button. There are three MCC colors:
Skin Tone, Green Grass and Blue Sky. Press the or button to adjust the value of a color selected. Changing the adjustment value will refresh the adjusted screen. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return MCC Easy Control Detail Control
: Turkish Blue Move Enter Return Detail Control Skin Tone Green Grass Blue Sky Reset 50 50 50 Move Enter Return Original Adjusted Detail Control L Skin Tone M Move 50 Adjust Return Resetting the MCC Colors to the Factory Defaults You can return to the factory default settings for MCC colors. Detail Control 4 Press the MENU button to display the Detail Control menu. Press the or button to select Reset, then press the ENTER button. The previously adjusted MCC Colors will be reset to the factory defaults. Input Picture Sound Channel Setup Skin Tone Green Grass Blue Sky Reset 50 50 50 Move Enter Return 54 55 Special Features Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. Viewing Picture-In-Picture One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP system allows you to watch two different pictures at once, even if you dont have a VCR connected to your TV. 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select Film Mode, then press the ENTER button. 3 Press the or button to select Off or On, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Off On Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return NOTE Film mode is supported in 480i only. Activating the PIP 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the ENTER button to select PIP. Press the or button to select On, then press the ENTER button. The sub picture appears in the corner of the screen. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On Off On
: TV
: Air 11
: Main Move Enter Return 56 Alternate method Press the PIP button on the remote control repeatedly to activate or deactivate the PIP. NOTES This feature doesnt function when the V-Chip or Caption is active. This feature doesnt operate in the HDMI mode. If you turn the TV off while watching and turn it on again, then the mode will return to normal video. 57 Special Features Selecting an External Source You can use PIP to view a signal from an external source, such as a VCR. Swapping the Sub Picture and Main Picture Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On
: TV TV AV1 AV2 AV3 S-Video1
: Air 11 S-Video2
: Main S-Video3 Move Enter Return 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the or button to select Source, then press the ENTER button. If you have not connected any equipment to the TVs input jacks, the signal from these inputs will not appear. Press the or button to select an external signal, then press the ENTER button. Press the EXIT button to exit. 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the or button to select Swap, then press the ENTER button. The sub picture appears in the main picture, and vice versa. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On
: TV
: Air 11
: Main Move Enter Return NOTES The sub picture doesnt support ANT 2 IN, Component1, Component2, PC, DVI and HDMI. For more information about external signals, see Viewing an External Signal Source (See page 41). If you select TV, the sub picture is the same as the main picture. NOTE The swapping doesnt support ANT 2 IN, Component1, Component2, PC, DVI and HDMI. 58 59 Special Features Changing the Size of the Sub Picture Changing the Location of the Sub Picture 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the or button to select Size, then press the ENTER button. Press the or button to select a size you want, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On
: TV
: Air 11
: Main Move Enter Return Alternate method Press the SIZE button on the remote control repeatedly to select one of the settings. 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the or button to select Position, then press the ENTER button. Press the or button to select a position you want, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On
: TV
: Air 11
: Main Move Enter Return 60 61 Special Features Changing the Channel of the Sub Picture Selecting the Sound Source After you set the signal source (antenna or cable) of sub picture, it is easy to change channels. You can use this feature to hear sound from the main or sub picture. 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the or button to select Channel, then press the ENTER button. Press the or button to select a channel you want, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On
: TV L
: Air 11 Air 11
: Main M Move Enter Return Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return Picture
: Standard
: Warm1
: Off
: On
: Off Mode Color Tone Size Digital NR DNIe MCC Film Mode PIP Move Enter Return PIP Source Swap Size Position Channel Select Sound PIP
: On
: TV
: Air 11
: Main Main Sub Move Enter Return 1 Press the MENU button. Press the or button to select Picture, then press the ENTER button. 2 Press the or button to select PIP, then press the ENTER button. 3 Press the or button to select Select Sound, then press the ENTER button. Press the or button to select Main or Sub, then press the ENTER button. Main is for the main TV picture audio, and Sub is for the sub picture (PIP) audio. Press the EXIT button to exit. Alternate method Press the CH channels of sub picture during PIP on. or CH button on the remote control to change NOTE The channels of sub picture are not available when antenna is set to ANT 2 IN. It links to ANT 1 IN. 62 63 Special Features Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP (Separate Audio Program). SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather. 1 Press the MENU button. Press the or button to select Sound, then press the ENTER button. 2 Press the or button to select SRS TSXT, then press the ENTER button. 3 Press the or button to select Off, 3D Mono or Stereo, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard Off
: Off 3D Mono
: Stereo Stereo
: Off
: Off Move Enter Return Alternate method Press the SRS TSXT button on the remote control repeatedly to select one of the settings. 1 Press the MENU button. Press the or button to select Sound, then press the ENTER button. 2 Press the or button to select MTS, then press the ENTER button. 3 Press the or button to select Mono, Stereo or SAP, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo Mono
: Off Stereo SAP
: Off Move Enter Return Alternate method Press the MTS button on the remote control repeatedly to select one of the settings. Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. Choose Stereo for channels that are broadcasting in stereo. Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation. 64 65 Special Features Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. Auto Volume automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Enjoying the Sound of External Speakers When using external device such as Home Theater Systems, external speaker, or external Audio Amplifier set Internal Mute to On to produce sound which is consistent with what the picture shows. 1 Press the MENU button. Press the or button to select Sound, then press the ENTER button. 2 Press the or button to select Auto Volume, then press the ENTER button. 3 Press the or button to select Off or On, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off Off
: Off On Move Enter Return 1 Press the MENU button. Press the or button to select Sound, then press the ENTER button. 2 Press the or button to select Internal Mute, then press the ENTER button. 3 Press the or button to select Off or On, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Move Enter Return Sound Mode Equalizer SRS TSXT MTS Auto Volume Internal Mute
: Standard
: Off
: Stereo
: Off
: Off Off On Move Enter Return 66 67 Special Features Using the V-Chip (USA) Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (and you can change it later, if necessary). NOTE The V-Chip doesnt function when the PIP is active. How to Change Your Password 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Press the or button to select V-Chip, then press the ENTER button. 2 Press the number buttons to enter your current 4-digit pin number.
(The default pin number for a new TV set is 0000.) The V-Chip menu is displayed. 3 Press the or button to select Change PIN, then press the ENTER button. 4 Press the number buttons to enter your new 4-digit pin number. 5 Re-enter your new pin number to confirm. Press the EXIT button to exit. NOTE If you forget the pin number, press the remote control buttons in the following sequence, which resets the pin to 0-0-0-0:
POWER (Off), MUTE, 8, 2, 4, POWER (On). 68 Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return V-Chip Enter PIN
0 9 Enter PIN Return V-Chip V-Chip Lock TV Parental Guidelines MPAA Rating Change PIN
: Off Move Enter Return Change PIN Enter New PIN
0 9 Enter PIN Return Change PIN Confirm New PIN
0 9 Enter PIN Return How to Enable/Disable the Rating Controls 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select V-Chip, then press the ENTER button. 3 Press the number buttons to enter your current 4-digit pin number.
(The default pin number for a new TV set is 0000.) The V-Chip menu is displayed. 4 Press the ENTER button to select V-Chip Lock. 5 Press the or button to select On, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return V-Chip Enter PIN
0 9 Enter PIN Return V-Chip V-Chip Lock TV Parental Guidelines MPAA Rating Change PIN
: Off Move Enter Return V-Chip V-Chip Lock TV Parental Guidelines MPAA Rating Change PIN
: Off Off On Move Enter Return 69 Special Features How to Set up Restrictions Using the TV Parental Guidelines The parental restrictions can be set up using either of two methods: The TV Parental Guidelines or MPAA Rating. 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select V-Chip, then press the ENTER button. 3 Press the number buttons to enter your current 4-digit pin number.
(The default pin number for a new TV set is 0000.) The V-Chip menu is displayed. 4 Press the or button to select TV Parental Guidelines, then press the ENTER button. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return V-Chip Enter PIN
0 9 Enter PIN Return V-Chip V-Chip Lock TV Parental Guidelines MPAA Rating Change PIN
: On Move Enter Return Input Picture Sound Channel Setup TV Parental Guidelines ALL FV V S L D TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Move Enter Return 5 You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol Press the /// buttons and the ENTER button to activate the appropriate restrictions for TV (FCC) rating system.
: Young children TV-Y TV-Y7 : Children 7 and over TV-G : General audience TV-PG : Parent Guidance TV-14 : Viewers 14 and over TV-MA : Mature Audience Press the EXIT button to exit. NOTES These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7), and TV-G through TV-MA (everybody else). The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV parental guidelines must be set up separately for each age group. (See page 73.) 70 71 Special Features How to Set up Restrictions Using the MPAA Rating The Movie rating system uses the MPAA (Motion Picture Association of America) system, and its main application is for movies. When the rating controls is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA Rating or TV Parental Guidelines). 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select V-Chip, then press the ENTER button. 3 Press the number buttons to enter your current 4-digit pin number.
(The default pin number for a new TV set is 0000.) The V-Chip menu is displayed. 4 Press the or button to select MPAA Rating, then press the ENTER button. 5 You can independently lock the movie ratings. The locked movie ratings are indicated by the symbol Press the //ENTER buttons to activate the appropriate restrictions for movie rating system. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return V-Chip Enter PIN
0 9 Enter PIN Return V-Chip V-Chip Lock TV Parental Guidelines MPAA Rating Change PIN
: On Move Enter Return MPAA Rating Block G PG PG-13 R NC-17 X NR Move Enter Return 72 Press the EXIT button. Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems:
TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content. TV-14 Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence. TV-PG Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialogue and situations. TV-G General audience. It contains little or no violence, no strong language, and little or no sexual dialogue or situations. TV-Y7 Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. TV-Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two six. TV (FCC) Content Category V S L D FV Violence. Sexual content. Offensive language. Dialogue sexual innuendo. Fantasy or cartoon violence. MPAA Rating System (Movies) G PG General audience. No restriction. Children under 13 should be accompanied by an adult. Parental guidance suggested. Children under 13 should be accompanied by an adult. Restricted. Viewers should be 17 or older. R NC-17 Not classified. Viewers should be 17 or PG-13 X NR older. Adults only. Not rated. TV (FCC) ratings : The particular rating that you have selected will be locked (and indicated as a red L on a blue background). Also, all of the age-based ratings will be locked within the particular group (i.e., group 1 or group 2). Suppose that the TV-G rating and all of its contents (V, S, L, and D) are locked. In that case, more restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are automatically locked as well. MPAA ratings : The particular rating that you have selected will be locked. In addition, more restrictive ratings will be locked as well. Neither TV (FCC) ratings nor MPAA ratings apply to news programs. 73 Special Features Viewing Closed Caption Information Your TV decodes and displays the closed captions information that is broadcast along with some television shows. These captions are usually subtitles for the hearing impaired or translations into other languages. All VCRs record the closed caption signal from television programs, so pre-
recorded video tapes can also deliver closed-caption information. Check for the closed caption symbol (
) on the tapes package or your TV program-schedule. 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Press the or button to select Caption, then press the ENTER button. 2 Press the ENTER button to select Caption. Press the or button to select On, then press the ENTER button. 3 Press the or button to select Mode, then press the ENTER button. Press the or button to select Caption or Text, then press the ENTER button. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Caption
: On
: Caption
: 1
: 1 Off On Caption Mode Channel Field Move Enter Return Caption
: On
: Caption Caption
: 1
: 1 Text Caption Mode Channel Field Move Enter Return In Caption mode, caption appears at the bottom of the screen, and they usually cover only a small portion of the picture. In Text mode, information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. 4 Depending on the particular broadcast, it might be necessary to make changes to Channel and Field. Press the or button to select Channel, then press the ENTER button. 5 Press the or button to select 1 or 2, then press the ENTER button. 6 Press the or button to select Field, then press the ENTER button. Press the or button to select 1 or 2, then press the ENTER button. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Caption
: On
: Caption
: 1
: 1 Caption Mode Channel Field Move Enter Return Caption
: On
: Caption
: 1
: 1 1 2 Caption Mode Channel Field Move Enter Return Caption Mode Channel Field Caption
: On
: Caption
: 1
: 1 1 2 Move Enter Return Different channels and fields display different information:
Field 2 carries additional information that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish.) NOTES The Caption function doesnt operate when the PIP is active. Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV. 74 75 Special Features Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. Setting The On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select Blue Screen, then press the ENTER button. 3 Press the or button to select On or Off, then press the ENTER button. Press the EXIT button to exit. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English Off
: Off On
: On Move Enter Return 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select Melody, then press the ENTER button. 3 Press the or button to select On, then press the ENTER button. Press the EXIT button to exit the menu. Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Off On Move Enter Return 76 77 Special Features Using the Color Weakness Enhancement Feature This feature adjusts the Red, Blue or Green color to enhance the picture according to the user's particular color weakness. 1 Press the MENU button. Press the or button to select Setup, then press the ENTER button. 2 Press the or button to select Color Weakness, then press the ENTER button. 3 Press the ENTER button to select Color Weakness. Press the or button to select On, then press the ENTER button. 4 Press the or button to select a color to be adjusted, then press the ENTER button. Press the or button to adjust the value of a color selected. Press the EXIT button to exit. Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Color Weakness : On Off Red On Green Blue 0 0 0 Move Enter Return Setup Color Weakness : On Red Green Blue 0 0 0 Move Enter Return Color Weakness 0 Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup L Red M Move Adjust Return 78 PC Display PC Display Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. TV Rear Panel Audio Cable 15Pin(D-Sub) Cable PC Setting up Your PC Software (Based on Widows 98) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic setup information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on Settings on the Windows start menu. While Settings is highlighted, move the cursor so that control panel is highlighted. When the control panel screen appears, click on Display and a display dialog-box will appear. Navigate to the Settings tab on the display dialog box. The two key variables that apply to the TV-PC interface are resolution and colors. The correct settings for these two variables are:
* Screen area (sometimes called resolution): 1024 x
* Colors: 24-bit color (might also be expressed as 768 pixels 16 million colors). 80 continued... 81 If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box. PC Display Display Modes Mode VGA Resolution 640 x 350 720 x 400 640 x 480 SVGA 800 x 600 XGA DTV 832 x 624 1024 x 768 1920 x 1080i 1280 x 720p 720 x 483p Horizontal Frequency [KHz]
Vertical Frequency [Hz]
Pixel Clock [MHz]
Sync Polarity (H/V) 31.47 31.47 37.93 31.47 35.00 37.86 37.50 43.27 35.16 37.88 48.08 46.87 53.67 49.73 48.36 56.40 60.02 33.75 45.00 31.47 70.00 70.00 85.00 60.00 66.70 72.80 75.00 85.00 56.30 60.30 72.20 75.00 85.10 74.60 60.00 70.10 75.00 60 60 60 25.175 28.322 35.5 25.175 30.24 31.50 31.50 36.00 36.00 40.00 50.00 49.50 56.25 57.284 65.00 75.00 78.75 74.25 74.25 27
X X X NOTE Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table above shows all of the display modes that are supported:
* The interlace mode is not supported.
* The TV will operate abnormally if a non-standard video format is selected. NOTES When this TV is used as a PC display, 32-bit color is supported (over 16 million colors). Your PC display screen might appear different, depending on the manufacturer (and depending on your particular version of Windows). Check your PC instruction book for information about connecting your PC to a TV display-monitor. Same modes as PC are supported for the signal input to the DVI jack. Only a separate sync signal is supported. 82 Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1 Press the TV/VIDEO button to select PC. 2 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Picture Input Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return PC Coarse Fine Position Auto Adjustment Recall Move Enter Return 1344 0 Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup L Coarse M L Fine M 3 Press the or button to select PC, then press the ENTER button. 4 Press the or button to select Coarse or Fine, then press the ENTER button. 5 Pressing the or button to remove the picture noise. Press the EXIT button to exit. NOTE This feature may change the width of the image. If necessary, adjust the position to center. 83 PC Display Changing the Picture Position After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. Adjusting the Picture Quality and Position Automatically This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. 1 Press the TV/VIDEO button to select PC. 2 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Picture Input Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return PC Coarse Fine Position Auto Adjustment Recall Move Enter Return Position M L M M Move Enter Return Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup 3 Press the or button to select PC, then press the ENTER button. 4 Press the or button to select Position, then press the ENTER button. 5 Adjust the position of picture by pressing the ///
button. Press the EXIT button to exit. 1 Press the TV/VIDEO button to select PC. 2 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Picture Input Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return PC Coarse Fine Position Auto Adjustment Recall Move Enter Return Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup 3 Press the or button to select PC, then press the ENTER button. 4 Press the or button to select Auto Adjustment, then press the ENTER button. The picture quality and position are automatically adjusted, and the picture returns to original view about a few seconds later. Press the EXIT button to exit. Auto in Progress Please Wait NOTE If a PC signal is input to DVI or HDMI, you cant adjust the quality and position of picture. 84 85 PC Display Initializing the Picture Settings You can replace all picture settings with the factory default values. Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. 1 Press the TV/VIDEO button to select PC. 2 Press the MENU button. Press the or button to select Setup, then press the ENTER button. Picture Input Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Sound Channel Setup Input Picture Sound Channel Setup Input Picture Sound Channel Setup 3 Press the or button to select PC, then press the ENTER button. 4 Press the or button to select Recall, then press the ENTER button. The picture settings are replaced with the factory default values. Press the EXIT button to exit. Move Enter Return Setup Language Time V-Chip Caption Blue Screen Melody Color Weakness PC
: English
: Off
: On Move Enter Return PC Coarse Fine Position Auto Adjustment Recall Move Enter Return NOTES The Wide PC and Expand modes are recommended for the PC mode. In VGA (640x480) and SVGA (800x600) modes, the Wide and 4:3 modes are available. In XGA (1024x768) mode, the Wide mode is available. 1 Press the TV/VIDEO button to select PC. 2 Press the MENU button. Input Press the or button to select Picture, then press the ENTER button. Press the or button to select Size, then press the ENTER button. Picture
: Dynamic
: Normal
: On
: On Mode Custom Color Tone Size Digital NR DNIe MCC M More Move Enter Return Size Picture Sound Channel Setup Input Picture 3 Press the or button to select the screen format you want, then press the ENTER button. Sound Wide TV Wide PC Expend 4:3 Press the EXIT button to exit. Channel Setup Move Enter Return Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. Wide TV: Scales the picture to the size of the TV screen regardless of the aspect ratio of the input source. Wide PC: Scales the picture to 92% of the screen regardless of the aspect ratio of the input source. Expand: Scales the picture to the aspect ratio of the input source. 4:3: Displays the picture as it is without changing the aspect ratio of input source. Source (PC/DVI) 1920 x 1080i 1280 x 720 1024 x 768 720 x 483 (480p) Others Picture Size Wide TV 4:3 Wide TV Wide PC Expand 4:3 Wide TV Wide PC Expand Wide TV 4:3 Wide TV Wide PC Expand 4:3 86 87 Appendix S A M S U N G Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Problem Poor picture quality. Poor sound quality. No picture or sound. Possible Solution Try another channel. Adjust the antenna. Check all wire connections. Try another channel. Adjust the antenna. Make sure the MUTE button is off. Try another channel. Press the TV/VIDEO button. Make sure the TV is plugged in. Check the antenna connections. No color, wrong colors or tints. Make sure the program is broadcasted in color. Adjust the picture settings. Picture rolls vertically. The TV operates erratically. Your remote control does not operate your TV. The TV wont switch on. Adjust the antenna. Check all wire connections. If you are using a VCR, check the tracking. Unplug the TV for 30 seconds, then try operating it again. Press the MODE button to put your remote control into TV mode. Make sure the remote has batteries. Make sure the wall outlet is working. Make sure the remote has batteries. The display panel used for the DLP Projection TV is composed of many tiny pixels. These, pixels may occasionally appear on the screen. Cleaning and Maintaining Your TV With proper care, your TV will give you many years of service. Please follow these guidelines to get the maximum performance from your TV. Placement Do not put the TV near extremely hot, cold, humid or dusty places. Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners. Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper. Place the TV in a vertical position only. Liquids Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage. Cabinet Never open the cabinet or touch the parts inside. Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals. Do not put heavy objects on top of the cabinet. This DLP Projection TV projects the image onto a large screen by applying an optical system. If you place the TV set face down, it might cause a problem because dirt, or some other contaminant may become attached to the inside of the TV set. Temperature If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely. Using Your TV in Another Country If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies. Specifications Model Voltage Frequency of Operation Power Consumption Dimension (W x D x H) Weight HL-P5085W AC 120V 60Hz 200 watts HL-P5085W AC 120V 60Hz 200 watts
???? x ??? x ??? mm /
?? x ?? x ?? inches
?? Kg / ?? lbs
???? x ??? x ??? mm /
?? x ?? x ?? inches
?? Kg / ?? lbs 90 91 safety 2003.12.3 4:51 AM 2 Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This sysmbol indicated high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilations is provided. Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight. Do not place the sources of heat on this apparatus, such as a candle, ash tray, incense or other similar material. Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock. Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first. Do not expose this apparatus set to extreme temperature conditions or to extreme humidity conditions. This appratus use batteries. In your community there might be regulations that require you to dispose these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information. To cut off the power source, unplug this apparatus from the wall outlet. Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges. Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corrsponds to the local electrical supply. Never insert anything metallic into this appratus openings. Doing so many create the danger of electric shock. To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus's case. Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket. Locate this apparatus near an easily acessible AC outlet. If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. Unplug this apparatus from the AC outlet before any service. Be sure to pull the power plug out of the outlet if the TV is to remain unused or you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or deteriorating the insulation.
- 1 -
safety 2003.12.3 4:51 AM 3 Avertissement!
Consignes de scurit importantes veuillez lire les sections correspondant aux inscriptions qui figurent sur ce de rnier.)
(Avant toute installation de votre prod uit Samsung, ATTENTION RISQUE D'ELECTROCUTION NE PAS OUVRIR ATTENTION : POUR REDUIRE LES RISQUES D'ELECTROCUTION, NE RETIREZ PAS LE CAPOT (NI LE PANNEAU ARRIERE). A L'INTERIEUR DE L'APPAREIL, AUCUNE PIECE NE PEUT ETRE REPAREE PAR LUTILISATEUR. POUR TOUT DEPANNAGE, ADRESSEZ-VOUS A UN SPECIALISTE. Ce symbole indique qu'une tension leve est prsente l'intrieur de l'appareil. Tout contact avec une pice situe l'intrieur de cet appareil est dangereux. Ce symbole vous prvient qu'une documentation importante relative au fonctionnement et lentretien est fournie avec le produit. Les fentes et les ouvertures mnages dans le botier ainsi qu' larrire et au-dessous de l'appareil assurent la ventilation de ce dernier. Afin de garantir le bon fonctionnement de l'appareil et viter les risques de surchauffe, ces fentes et ouvertures ne doivent tre ni obstrues ni couvertes.
- Ne couvrez pas les fentes et les ouvertures avec un morceau de tissu ou tout autre objet.
- Ne les obstruez pas non plus en plaant lappareil sur un lit, un canap, un tapis ou toute autre surface
- Ne placez pas lappareil dans un environnement clos tel quune bibliothque ou une armoire encastre, sauf si apparente. une ventilation adquate est prvue. Ne placez pas lappareil proximit ou au-dessus dun radiateur ou dune bouche d'air chaud, de mme que dans un endroit expos la lumire directe du soleil. Ne placez pas de sources de chaleur sur lappareil, telles quune bougie, un cendrier, de l'encens. Ne placez aucun rcipient deau sur lappareil car cela reprsente un risque dincendie ou de dcharge lectrique. Nexposez pas lappareil la pluie et ne le placez pas proximit d'une source d'eau, par exemple une baignoire, un lavabo, un vier, un bac de lavage, un sous-sol humide, une piscine, etc. Si lapp areil vient tre mouill par accident, dbranchez-le et contactez immdiatement un revendeur agr. Si ncessaire, aprs vous tre assur de l'avoir dbranch, vous pouvez nettoyer lappareil laide dun chiffon humide. Nexposez pas lappareil des conditions de temprature ou dhumidit extrmes. Cet appareil peut fonctionner sur piles. Dans un souci de prservation de lenvironnement, la rglementation locale prvoit peut-tre des mesures spcifiques de rcupration des piles usages.Veuillez donc contacter les autorits comptentes afin dobtenir des informations sur la mise au rebut ou le recyclage des piles. Pour couper lalimentation, db ranchez lappareil de la prise murale. Evitez de surcharger les prises murales, les rallonges et les prises mult iples car cela entrane un risque d'incendie ou de dcharge lectrique. Les cordons d'alimentation doivent tre drouls de sorte qu'aucun objet plac sur ou contre eux ne les chevauche ou les pince. Accordez une attention particulire aux cordons au niveau des fiches, des prises et de la sortie de lappareil. En cas d'orage, ou bien lorsque vous vous absentez ou n'utilisez pas votre appareil pendant une longue priode, dbranchez celui-ci de la prise murale et dbranchez galement le cble dantenne ou le cordon de connexion au rseau cbl. Ces prcautions viteront que lappareil ne soit endommag par la foudre ou par des surtensions. Avant de raccorder le cordon dalimentation CA la prise de ladaptateur CC, vrifiez que la tension indique sur ce dernier correspond bien la tension dlivre par le rseau lectrique local. Ninsrez aucun objet mtallique dans les ouvertures de lappareil. vous risqueriez de recevoir une dcharge lectrique. lectrique. Afin dviter tout risque d'lectrocution, ne mettez jamais les doigts lintrieur de lappareil. Seul un technicien qualifi est habilit ouvrir le botier de lappareil. Assurez-vous de tirer sur la fiche et non sur le cordon lorsque vous dbranchez lappareil d'une prise Placez lappareil proximit dune prise CA facile daccs. Si lappareil ne fonction ne pas normalement, en particulier sil met des odeurs oudes sons anormaux, dbranchez-le immdiatement et contactez un revendeur ou un centre de dpannage agr. Dbranchez lappareil de la prise CA avant toute rparation. Veillez bien dbrancher le cordon d'alimentation si la tlvision doit reste inutilise, ou lorsque vous quittez votre domicile, pendant une priode assez longue (et plus spcialement si des enfants, des personnes ges ou des majeurs incapables doivent rester seul votre domicile).
- L'accumulation de poussires peut provoquer une lectrocution, une perte d'nergie, ou un incendie induit par le cordon d'alimentation, d des variations de tension, une surchauffe ou une dtrioration de l'isolation.
- 2 -
safety 2003.12.3 4:51 AM 4 Advertencia!
Instrucciones importantes de seguridad
(Lea la seccin apropiada que corresponde a la marca del producto Samsung antes de intentar instalar el producto.) PRECAUCIN PELIGRO DE DESCARGA ELCTRICA NO ABRIR PRECAUCIN:PARA REDUCIR EL PELIGRO DE DESCARGA ELCTRICA, NO RETIRE LA CUBIERTA. NO HAY PIEZAS EN EL INTERIOR QUE PUEDA REPARAR EL USUARIO. CONSULTE AL PERSONAL CUALIFICADO DE SERVICIO TCNICO. Este smbolo indica la presencia de alto voltaje en el interior. Es peligroso entrar en contacto con cualquier pieza interior de este producto. Este smbolo le alerta de que con este producto se incluye documentacin importante correspondiente al funcionamiento y mantenimiento. Las ranuras y aberturas existentes en la unidad y en la parte trasera o inferior se facilitan para proporcionar la ventilacin necesaria. Para garantizar el funcionamiento fiable de este aparato, y para protegerlo frente a sobrecalentamiento, estas ranuras y aberturas nunca deben bloquearse ni cubrirse.
- No cubra las ranuras y aberturas con un pao o con cualquier otro material.
- No bloquee las ranuras ni aberturas colocando este aparato sobre la cama, sof, alfombra o superficie similar.
- No coloque este aparato en un espacio cerrado, como una librera, o un armario empotrado, a menos que se proporcione una ventilacin correcta. No coloque este aparato cerca o sobre un radiador o una rejilla de aire caliente, o en lugares expuestos a luz solar directa. No coloque fuentes de calor en este aparato, como una vela, un cenicero, incienso o material similar. No coloque recipientes con agua sobre este aparato, ya que podra representar riesgo de incendio o descarga elctrica. No exponga este aparato a la lluvia ni lo coloque cerca de agua (cerca de una baera, lavabo, fregadero o lavadero, en un stano hmedo ni cerca de una piscina o similar). Si este aparato accidentalmente se moja, desenchfelo y pngase en contacto inmediatamente con un autorizado. Puede limpiar este aparato con un pao hmedo cuando sea necesario, pero asegrese de desenchufar primero el aparato. exponga este aparato a condiciones de temperatura o humedad extremas. Este aparato utiliza bateras. En su comunidad puede que existan normativas que requieran la disposicin de estas bateras de forma adecuada bajo consideraciones ambientales. Pngase en contacto con las autoridades locales para obtener informacin sobre desecho y reciclaje. Para cortar la fuente de alimentacin, desenchufe este aparato de la toma mural. No sobrecargue las tomas murales, los alargadores ni los receptculos correspondientes por encima de su capacidad, ya que esto puede generar incendios o descargas elctricas. Los cables de alimentacin y proteccin deben colocarse de forma que no puedan pisarse ni quedar atrapados por objetos encima o contra ellos, poniendo especial atencin en los cables cerca del enchufe, los receptculos de los electrodomsticos y el punto en el que salen del aparato. Para proteger este aparato durante una tormenta elctrica o cuando no lo utilice durante largos periodos de tiempo, desenchfelo de la toma de la pared y desconecte la antena o el cable del sistema. Esto evitar que el equipo se dae por rayos o picos de tensin de la lnea elctrica. Antes de conectar el cable de alimentacin de CA a la toma del adaptador de CC, asegrese de que la designacin del voltaje del adaptador de CC corresponde a la fuente elctrica local. Nunca inserte nada metlico en las aberturas del aparato. Hacerlo as puede crear peligros de descarga elctrica. Para evitar descarga elctrica, no toque nunca el interior de este aparato. Slo un tcnico cualificado debe abrir el alojamiento del aparato. Asegrese de sujetar el enchufe, no el cable, al desconectar este aparato de la toma elctrica. Site este aparato cerca de una toma de CA de fcil acceso. Si este aparato no funciona normalmente, en concreto, si emite sonidos extraos o desprende olores desde el interior, desenchfelo inmediatamente y pngase en contacto con el distribuidor autorizado o el centro de servicio tcnico. Desenchufe este aparato de la toma de CA antes de realizar cualquier operacin de servicio. Asegrese de desconectar el enchufe de alimentacin de la toma de corriente si la TV ha dejado de utilizarse, o desea salir de casa, durante un largo perodo de tiempo (especialmente cuando sea necesario dejar solos en casa a nios, ancianos o personas incapacitadas).
- El polvo acumulado puede provocar una descarga elctrica, un cortocircuito o un fuego, haciendo que el cable elctrico genere chispas y calor, o deteriorando la funda protectora.
- 3 -
safety 2003.12.3 4:51 AM 5 Achtung! Wichtige Sicherheitshinweise
(Bitte lesen Sie den Ihrem Samsung Gert entsprechenden Abschnitt, bevor Sie dieses installieren.) ACHTUNG STROMSCHLAGGEFAHR NICHT FFNEN ACHTUNG: ABDECKUNG ODER RCKWAND NICHT FFNEN!
STROMSCHLAGGEFAHR! IM GERTEINNEREN BEFINDEN SICH KEINE VOM BENUTZER ZU WARTENDEN TEILE. LASSEN SIE REPARATUREN NUR VON QUALIFIZIERTEM KUNDENDIENSTPERSONAL DURCHFHREN. Dieses Symbol weist auf eine hohe Spannung im Inneren des Gerts hin. Das Berhren von Teilen im Gerteinneren ist gefhrlich. Dieses Symbol weist darauf hin, dass diesem Gert wichtige Anweisungen zu Betrieb und Wartung beigefgt sind. Die Schlitze und ffnungen im Gehuse und in der Rckwand oder im Boden sind fr die Belftung erforderlich. Um den zuverlssigen Betrieb des Gerts zu gewhrleisten und es vor berhitzung zu schtzen, drfen diese ffnungen keinesfalls blockiert oder bedeckt werden.
- Bedecken Sie die Schlitze und ffnungen nicht mit einem Tuch oder anderen Materialien.
- Schlitze und ffnungen drfen keinesfalls blockiert werden, indem das Gert auf ein Bett, Sofa, einen Teppich oder eine hnliche Oberflche gestellt wird.
- Stellen Sie das Gert nicht in abgeschlossene Rume wie z. B. in ein Bcherregal oder einen Einbauschrank. Dieser Einbau ist nur dann zulssig, wenn fr ausreichende Belftung gesorgt wird. Auerdem darf das Gert keinesfalls in der Nhe oder ber einem Radiator oder Heizkrper aufgestellt werden, oder an Orten, an denen es direkter Sonneneinstrahlung ausgesetzt ist. Stellen Sie keine Wrmequelle auf das Gert wie z. B. Kerzen, Aschenbecher, Rucherstbchen oder vergleichbare Materialien. kann. Stellen Sie keine mit Flssigkeit gefllte Behlter auf das Gert, da dies zu einem Brand oder Stromschlag fhren Setzen Sie das Gert keinesfalls Regen aus und stellen Sie es nicht in der Nhe von Wasser auf (Badewanne, Kchensple, feuchter Keller, Schwimmbecken usw). Falls das Gert dennoch Nsse ausgesetzt wurde, trennen Sie es von der Stromversorgung und wenden Sie sich umgehend an Ihren rtlichen Vertreter. Sie knnen das Gert, falls erforderlich, mit einem feuchten Tuch reinigen. Trennen Sie es davor unbedingt von der Stromversorgung. Setzen Sie das Gert nicht extremen Temperaturbedingungen oder extremen Feuchtigkeitsbedingungen aus. Fr dieses Gert bentigen Sie Batterien. Entsorgen Sie die Batterien gem den regionalen Umweltschutzbestimmungen. Um das Gert von der Stromversorgung zu trennen ziehen Sie den Stecker aus der Steckdose. berlasten Sie Steckdosen, Verlngerungskabel und Mehrfachstecker keinesfalls, da dies zu einem Brand oder Stromschlag fhren kann. Netzkabel mssen so verlegt werden, dass niemand auf das Kabel treten kann oder es durch Gegenstnde gequetscht wird, die auf dem Kabel stehen oder gegen das Kabel drcken. Besondere Aufmerksamkeit muss den Bereichen um Stecker, Steckdosen und dem Punkt zukommen, an dem das Netzkabel aus dem Gert herausgefhrt wird. Zum Schutz des Gerts bei einem Gewitter oder lngerem Nichtbetrieb trennen Sie das Gert vom Netz. Trennen Sie darber hinaus das Antennenkabel vom Gert. Auf diese Weise werden Schden durch Blitzschlag oder Spannungsste vermieden. Stellen Sie sicher, dass die Nennspannung des Netzteils fr die rtliche Stromversorgung geeignet ist, bevor Sie das Netzkabel an die Stromversorgung anschlieen. Stecken Sie keinesfalls metallische Gegenstnde in die ffnungen des Gerts. Dies kann zu Stromschlgen fhren. Berhren Sie keinesfalls Bauteile im Gerteinneren, um Stromschlge zu vermeiden. Das Gert darf nur von einem qualifizierten Techniker geffnet werden. Ziehen Sie beim Trennen des Gertes von der Stromversorgung nicht am Netzkabel sondern am Stecker. Stellen Sie das Gert der Nhe einer leicht zugnglichen Steckdose auf. Wenn das Gert nicht einwandfrei funktioniert, insbesondere beim Auftreten ungewhnlicher Gerusche oder Gerche aus dem Inneren, trennen Sie es unverzglich von der Stromversorgung und wenden Sie sich umgehend an Ihren rtlichen Vertreter. Trennen Sie das Gert vor jeder Wartung oder Reinigung von der Stromversorgung. Achten Sie darauf, dass der Netzstecker gezogen wird, wenn das Fernsehgert nicht benutzt werden soll oder Sie lngere Zeit abwesend sind (besonders wenn Kinder, ltere oder behinderte Menschen allein im Haus gelassen werden).
- Angesammelter Staub kann bei Funkenund Hitzebildung oder Beschdigung der Isolation einen Stromschlag, elektrischen Kriechstrom oder einen Brand verursachen.
- 4 -
safety 2003.12.3 4:51 AM 6 Aviso! Instrues de segurana importantes
(Leia a seco adequada que corresponde marca no produto Samsung antes de tentar instalar o produto.) CUIDADO RISCO DE CHOQUE ELCTRICO NO ABRIR CUIDADO:PARA REDUZIR O RISCO DE CHOQUE ELCTRICO, NO RETIRE A TAMPA (NEM A PARTE TRASEIRA). NO INTERIOR DO TELEVISOR NO EXISTEM PEAS QUE POSSAM SER REPARADAS PELOUTILIZADOR. A ASSISTNCIA S PODE SER EFECTUADA POR TCNICOS QUALIFICADOS. Este smbolo indica a existncia de alta tenso no interior do televisor. perigoso tocar em qualquer parte no interior do produto. Este smbolo informa-o de que este produto inclui literaturaimportante sobre o respectivo funcionamento e manuteno. As ranhuras e aberturas na caixa e na parte posterior ou inferior permitem a ventilao necessria. Para garantir o funcionamento correcto do aparelho e para o proteger do sobreaquecimento, nunca deve bloquear ou tapar estas ranhuras e aberturas.
- No tape as ranhuras e aberturas com panos ou outros materiais.
- No bloqueie as ranhuras e aberturas colocando o aparelho numa cama, sof, tapete ou outra superfcie
- No coloque este aparelho num espao fechado, como uma estante ou um armrio embutido, a menos que semelhante. tenha ventilao adequada. No coloque este aparelho perto ou por cima de um radiador, sistema de aquecimento ou num local em que esteja exposto incidncia directa dos raios solares. No coloque fontes de calor em cima do aparelho, como velas, cinzeiros, incensos ou outros materiais No coloque recipientes com gua em cima do aparelho, porque pode provocar um incndio ou choque semelhantes. elctrico. No exponha o aparelho chuva nem coloque em locais perto de gua (perto de uma banheira, lavatrio, lava-loia, tubo da mquina de lavar a loia, piscina ou numa cave com humidade). Se molhar acidentalmente o aparelho, desligue-o da ficha e contacte de imediato o revendedor autorizado. Quando for necessrio, pode limpar o aparelho com um pano hmido, mas certifique-se de que primeiro desliga o aparelho da ficha. No exponha o aparelho a condies de temperatura ou humidade extremas. Este aparelho tem pilhas. Deite fora as pilhas adequadamente de acordo com as consideraes ambientais existentes no seu pas. Contacte as autoridades locais para obter informaes sobre a destruio ou reciclagem de pilhas. Para desligar a fonte de alimentao, retire a ficha do aparelho da tomada de parede. No sobrecarregue tomadas de parede, extenses nem receptculos, porque pode provocar um incndio ou choque elctrico. Deve colocar os cabos de alimentao de forma a no serem pisados nem entalados por objectos, tendo em especial ateno os cabos ligados a fichas, a receptculos e ao ponto de onde os cabos saem do aparelho. Para proteger o aparelho de trovoadas, ou quando no for utiliz-lo durante longos perodos de tempo, desligue o aparelho da tomada de parede e desligue a antena ou o sistema de televiso por cabo. Deste modo, o aparelho no sofre eventuais danos provocados por raios e descargas em cabos de alta tenso. Antes de ligar o cabo de alimentao de CA tomada do transformador de CC, certifique-se de que a designao de tenso do transformador de CC corresponde alimentao elctrica local. Nunca introduza objectos metlicos nas aberturas do aparelho. Se o fizer, pode provocar choques elctricos. Para evitar choques elctricos, nunca toque no interior do aparelho. A caixa do aparelho s deve ser aberta por tcnicos qualificados. Quando desligar o aparelho da tomada, puxe pela ficha e no pelo cabo. Coloque o aparelho perto de uma tomada de CA de fcil acesso. Se o aparelho no funcionar normalmente - em particular, se o aparelho emitir rudos ou cheiros invulgares desligue o aparelho de imediato e contacte o revendedor autorizado ou centro de assistncia tcnica. Desligue o aparelho da tomada de CA antes de serem efectuados quaisquer servios de assistncia. Certifique-se de que retira a ficha de alimentao da tomada se o aparelho de televiso no for utilizado ou se o utilizador no estiver em casa durante um perodo de tempo longo (especialmente quando crianas, idosos ou pessoas com deficincias forem deixadas sozinhas em casa).
- Poeira acumulada pode provocar um choque elctrico, uma fuga elctrica ou um incndio, fazendo com que o fio de alimentao produza fascas e aquea ou deteriore o isolamento.
- 5 -
safety 2003.12.3 4:51 AM 7 Avvertenza!
Importanti istruzioni per la sicurezza leggere la sezione che si riferisce al marchio presente sul vostro dispositivo Samsung.)
(Prima di installare il prodotto, ATTENZIONE RISCHIO DI SCARICHE ELETTRICHE NON APRIRE ATTENZIONE:PER EVITARE IL RISCHIO DI SCOSSE ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O IL PANNELLO POSTERIORE). ALL'INTERNO NON PRESENTE ALCUNA PARTE RIPARABILE DALL'UTENTE.IN CASO DI RIPARAZIONI RIVOLGERSI A PERSONALE QUALIFICATO. Questo simbolo indica la presenza di alta tensione all'interno. pericoloso toccare qualunque parte interna del prodotto. Questo simbolo informa che al prodotto allegata della documentazione importante relativa al funzionamento e alla manutenzione. Le fessure e le aperture presenti sul telaio o nelle parti posteriore e inferiore garantiscono una ventilazione adeguata. Per assicurare il funzionamento corretto del prodotto e proteggerlo dal surriscaldamento, le fessure e le aperture non devono mai essere bloccate o coperte.
- Non coprire le fessure e le aperture con un panno o altri materiali.
- Non bloccare le fessure e le aperture posizionando il dispositivo sul letto, sul divano, su una coperta o su
- Non posizionare il dispositivo in uno spazio ristretto, quale ad esempio una libreria o un telaio incorporato, superfici analoghe. senza una ventilazione adeguata. alla luce diretta del sole. simili. Non posizionare il dispositivo vicino o sopra un radiatore o una valvola di regolazione del calore, n esporlo Non posizionare sul dispositivo alcuna fonte di calore quali candele, portacenere, incenso o altri materiali Non posizionare sul dispositivo recipienti pieni d'acqua per evitare il rischio di incendio o scosse elettriche. Non esporre il dispositivo alla pioggia n posizionarlo in luoghi con presenza di acqua (vasca da bagno, bacinella, lavello o lavatoio, pavimento bagnato, nei pressi di una piscina o in presenza di altre situazioni analoghe.). Se il dispositivo entra accidentalmente in contatto con lacqua, scollegarlo e contattare immediatamente un rivenditore autorizzato. Se necessario, possibile pulire il dispositivo con un panno umido, ma solo dopo averlo scollegato. Non esporre lunit a temperature o umidit eccessive. Questo dispositivo utilizza delle batterie. Il paese in cui si utilizza questo dispositivo potrebbe avere delle normative in materia di smaltimento delle batterie per la salvaguardia dellambiente. Contattare le autorit locali per ottenere informazioni in merito a smaltimento e riciclaggio. Per disattivare lalimentazione, scollegare il dispositivo dalla presa a parete. Non sovraccaricare la presa a parete, i cavi di prolunga o le altre prese utilizzate per non incorrere nel pericolo di incendio o scosse elettriche. I cavi di alimentazione devono essere posizionati in modo da non essere calpestati o schiacciati da oggetti collocati sopra o contro di essi, prestando particolare attenzione ai cavi in prossimit delle spine, delle prese utilizzate e del punto in cui escono dall'unit. Per proteggere il dispositivo durante un temporale, o quando viene lasciato incustodito e inutilizzato per lunghi periodi di tempo, staccarlo dalla presa a parete e scollegare lantenna o il sistema via cavo. Si evitano in questo modo danni all'unit provocati da fulmini o da picchi di corrente. Prima di collegare il cavo di alimentazione CA alluscita delladattatore CC, accertarsi che lindicazione di voltaggio presente sulladattatore corrisponda al tipo di alimentazione elettrica locale. Non inserire alcuna parte metallica nelle aperture del dispositivo. Ci pu generare pericolo di scosse elettriche. Per evitare la formazione di scosse elettriche, non toccare mai le parti interne del dispositivo. Il telaio del dispositivo deve essere aperto solo da un tecnico qualificato. Quando il dispositivo viene scollegato dalla presa di corrente, accertarsi di afferrare la spina e nonil cavo. Posizionare il dispositivo nei pressi di una presa CA facilmente accessibile. Se il dispositivo non funziona correttamente, in particolare se si avverte la presenza di rumori o odori insoliti, scollegarlo immediatamente e contattare un rivenditore autorizzato o il centro di assistenza tecnica. Scollegare il dispositivo dalla presa CA prima di eseguire qualsiasi intervento di manutenzione. Accertarsi di scollegare dalla presa di alimentazione la spina nel caso in cui la TV debba rimanere inutilizzata oppure si debba lasciare la casa per un periodo di tempo prolungato (in particolar modo quando ci sono bambini, anziani o persone disabili sole in casa).
- L'accumulo di polvere pu causare scosse elettriche, una dispersione elettrica o un incendio, provocando la generazione di calore e scintille dal cavo di alimentazione e il deteriorasi dell'isolamento.
- 6 -
safety 2003.12.3 4:51 AM 8
Samsung.)
- 7 -
- 8 -
W2@6T&f?
7<?I'@f?
@LeN@f?
3)K??@f?
V'@6X?f?
?V4@)Xf?
?I')X?e?
V'1?e?
)Xf@?e?
@)K?O&5?e?
(R4@@0Y?e?
?W2@@@
W&<??@
7@e?@
@@f
@@f
@@f
@@f
@@f
@@f
@@f
@@f
@@f
@@f
@@f
@@f
@@@@@@e W2@6X?f
?W.M?I/Xf W&H?eN)X?e 7@f?@1?e
@@@@@@@@@?e
@@he
@@he 3@L?f@?e V'1?e?J5?e
?V'=eO.Y?e V4@@0Yf
?W2@@6X?f
?7@??B)Xf
?@@?e@1f
@@f
?O2@@@f
?W20M?@@f W&<?e@@f 7@f@@f
@@e?J@@f 3@eO&@@W.e V4@@0MI40Ye
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?@@@@@@@e?
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?3@?O.e?
?V4@0Ye?
@@@@@@e@@@@@?e?
@@g@?f?
3@L?e?J5?f?
N@1?e?7H?f?
?3@LeJ5g?
?N@1e7Hg?
3@?C5?g?
N@@@H?g?
?3@5h?
?N@Hh?
?J5?h?
?7H?h?
C5he?
@@(Yhe?
@0Y?he?
?'6Xhf
?V')X?he N@)?fW-X?e
?@Y?e?O&@)Xe
?@@@@@@@@@@@@@@@@@@@@)e I'X?gW@@(M?f
?V/Xf?W&@0Yg V/K?eW&(Mh
?V46KO&(Y?h
?S@@@Yhe O&@@@@6Kh O2@0M?I4@@@@6Kf O2@@(Mg?W@@@@@@e
@@0M?@Y?gO&@W@0M?e
?@@@@@@@@@@@@(M?f
?@@?g?@@Hg
?@@?g?@@?g
?@@?g?@@?g
?@@?g?@@?g
?@@?g?@@?g
?@@?g?@@?g
?@@@@@@@@@@@@?g
?@(Mg?@5?g
?(Y?g?(Y?g
@K
@@@?hg
?J@@Y?fO26Xg W&@@@@@@@@@@@,g 7(?4@Xf@@0Yg
?J(YeI/KO2@0Mh W.Y?e?V@@@?he
.Ye?O2@0?4@@@6Kg O2@0M?fI4@@@@@@e
?O2@@Yhe?@@(M?e
@0M?@@@@@@@@@@@@@@(Yf
@@f@@f@@H?f
@@f@@f@@g
@@@@@@@@@@@@@@g
@@f@@f@@g
@@f@@f@@g
@@@@@@@@@@@@@5g
@Mh?I(Yg
@Ke@6X?he W&e@@@?N@,??@?@@6K?e
?W&5e@@H??(Y??@L?I'@@e W&@He@@g?@1??N@5e 7@@?e3@@@@@@@@@5?e(Ye
@MfV4@@@@@@@0Y?g
W2@@6Xg?
?W&@@@@)X?f?
?7(M?I'@1?f?
?@H?eN@@?f?
?@f?@@?f?
?@@?f?
?@5?f?
J@H?f?
75g?
?J(Yg?
W.Y?g?
?W.Yh?
W.Y?e@?f?
?W&Yf@?f?
W&@@@@@@@?f?
&@@@@@@@@?f?
W2@@6Xg?
?W&@@@@)X?f?
?7(M?I'@1?f?
?@H?eN@@?f?
?@f?@@?f?
?@@?f?
?@5?f?
J@H?f?
75g?
?J(Yg?
W.Y?g?
?W.Yh?
W.Y?e@?f?
?W&Yf@?f?
W&@@@@@@@?f?
&@@@@@@@@?f?
W2@@6Xg?
?W.MeI/X?f?
?7H?e?N1?f?
J@g@Lf?
7@g@1f?
@@g@@f?
@@g@@f?
@@g@@f?
@@g@@f?
@@g@@f?
@@g@@f?
3@g@5f?
N@g@Hf?
?3L?e?J5?f?
?V/KeO.Y?f?
V4@@0Yg?
W2@@6Xg?
?W.MeI/X?f?
?7H?e?N1?f?
J@g@Lf?
7@g@1f?
@@g@@f?
@@g@@f?
@@g@@f?
@@g@@f?
@@g@@f?
@@g@@f?
3@g@5f?
N@g@Hf?
?3L?e?J5?f?
?V/KeO.Y?f?
V4@@0Yg?
W2@6X?g?
?W&@@@)Xg?
?.M??I'1g?
N@g?
?@g?
J5g?
?O&Ug?
?@@@@)X?f?
?I'@1?f?
V'@?f?
?N@?f?
@?f?
?J5?f?
W.Y?f?
?'6K?O.Yg?
?V4@@0Y?g?
?O2@h?
?@@@@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
?@@@@@@@@?f?
?O2@h?
?@@@@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
?@@@@@@@@?f?
W2@@6Xg?
?W&@@@@)X?f?
?7(M?I'@1?f?
?@H?eN@@?f?
?@f?@@?f?
?@@?f?
?@5?f?
J@H?f?
75g?
?J(Yg?
W.Y?g?
?W.Yh?
W.Y?e@?f?
?W&Yf@?f?
W&@@@@@@@?f?
&@@@@@@@@?f?
?@@@@@@@f?
?@@@@@@@f?
J(M?h?
7Yhe?
@@6Kh?
@@@@6Xg?
?I4@@)X?f?
?I'@1?f?
V'@?f?
?N@?f?
@?f?
@?f?
?J5?f?
W.Y?f?
?'6K?O.Yg?
?V4@@0Y?g?
W2@6X?g?
?W&@@@)Xg?
?.M??I'1g?
N@g?
?@g?
J5g?
?O&Ug?
?@@@@)X?f?
?I'@1?f?
V'@?f?
?N@?f?
@?f?
?J5?f?
W.Y?f?
?'6K?O.Yg?
?V4@@0Y?g?
?@@?f?
?@@?f?
?@@?f?
?@@?f?
?@@@@@@@f?
?@@@@@@@f?
J(M?h?
7Yhe?
@@6Kh?
@@@@6Xg?
?I4@@)X?f?
?I'@1?f?
V'@?f?
?N@?f?
@?f?
@?f?
?J5?f?
W.Y?f?
?'6K?O.Yg?
?V4@@0Y?g?
W2@6X?g?
?W&@@@)Xg?
?.M??I'1g?
N@g?
?@g?
J5g?
?O&Ug?
?@@@@)X?f?
?I'@1?f?
V'@?f?
?N@?f?
@?f?
?J5?f?
W.Y?f?
?'6K?O.Yg?
?V4@@0Y?g?
@@he
@@he
?J@@L?h
?7Y@1?h J5?3@Lh 7H?N@1h
@?e@@h
?J5?e3@L?g
?7H?eN@1?g J@f?@@Lg 7@@@@@@@@1g
@?g@@g
?J5?g3@L?f
?7H?gN@1?f
?@h?@@?f
?@@@@@f?@@@@@@?e
@@@@hf@@
@@L?h?J@@
@@1?h?7@@
@@@LhJ@@@
@?@1h7Y@@
@?3@L?f?J5?@@
@?N@1?f?7H?@@
@??3@LfJ5e@@
@??N@1f7He@@
@?e3@L??J5?e@@
@?eN@1??7H?e@@
@?e?3@?C5f@@
@?e?N@@@Hf@@
@?f3@5?f@@
@?fN@H?f@@
@@@@@?e?@f@@@@
W-X?e
?O&@)Xe
@@@@@@@@@@@@@@@@@@@@@)e
@@(Mhf
@(Y?hf
?J(Yhg
?@K?O&Y?f?O26X?f
?@@@@@@@@@@@@@@@)?f
?@@?he@@H?f
?@@?f@Kf@@g
?@@?f@@@?e@@g
?@@?f@@H?e@@g
?@@?f@@f@@g
?@@?f@@f@@g
?@@?f@@f@@g
?@@?f@@f@@g
?@@?e?J@5f@5g
?@5?e?7@Hf(Yg
?(Y?eJ@5?/Khe
?W&(Y?V46Kh O&0YfI'@6K?f O20Mg?V4@@6X?e O20Mhe?I'@,?e V+Y?e
?@0M O26Xe
@@@@@@@@@@@@@@@@@@@@@)e
?@@(M?he
?@@Hhf
?@5?hf
@Kf?@Y?f?O26X?e
@@@@@@@@@@@@@@@@@@)?e
@@e?@@?e?@@?e@@H?e
@@e?@@?e?@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@@@@@@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@@@@@@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@?e?@@?e@@f
@@e?@@?e?@@?e@@f
@@@@@@@@@@@@@@@@@@f
@(M?hf@5f
(Y
(Yf
?O2@h?
?@@@@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
@@h?
?@@@@@@@@?f?
- 9 -
- 10 -
safety 2003.12.3 11:28 PM 12 Regulatory Compliance Statements Your Samsung product is marked to indicate its compliance class
- Federal Communications Commission (FCC) - USA
- Industry Canada Equipment Standard for Digital Equipment (ICES-003) - Canada
- Voluntary Control Council for Interference (VCCI) - Japan
- Bureau of Standards Metrology and Inspection (BSMI) - Taiwan
- Ministry of Information and Communication (MIC) - Republic of Korea
- Italian Post Ministry (Homologation) - Italy FCC Class A Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Class B Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. User Information Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. If necessary, consult with your dealer or an experienced radio/television technician for additiona suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Office. Washington, DC 20402, Stock Number 004-000-00345-4. The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive Suite #290, Irvine, CA92612 USA Warning User must use shielded signal interface cables to maintain FCC compliance for the product. Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal or exceeds the monitor voltage rating. For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type(parallel blades) plug cap. For 240 Volt applications use only UL Listed detachable power supply cord with NEMA configuration 6015P type(tandem blades) plug cap. This television receiver provides display of television closed captioning in accordance with Section 15.119 of the FCC rules.(TV broadcast receivers with picture screens 13 inches or larger in diameter models only)
- 11 -
safety 2003.12.3 4:51 AM 13 ICES-003 Class A Notice - Avis NMB-003, Classe A This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. ICES-003 Class B Notice - Avis NMB-003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. VCCI Class A Notice VCCI Class B Notice BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance label. European Notice(Europe Only) Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC),
(93/68/EEC) and the Low Voltage Directive(73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms:
- EN55022: Radio Frequency Interference
- EN55024: Electromagnetic Immunity of Information Technology Equipment
- EN61000-3-2: Power Line Harmonics
- EN61000-3-3: Voltage Fluctuations
- EN55013: Radio disturbance characteristics of broadcast receivers and associated equipments
- EN55020: Electromagnetic immunity of broadcast receivers and associated equipments European Class A Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.(Class A product only) AA (MIC Class A Notice)
. BB (MIC Class B Notice)
. Italian Homologation Notice Questo apparecchio e fabbricato in conformita al D.M.28.08.95 n.548 ed in particolare a quanto specificato nell Art.2, comma 1. Questo apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1
-. For products produced in countries except European Community Questo apparecchio e fabbricato in conformita al D.M.28.08.95 n.548 ed in particolare a quanto specificato nell Art.2, comma 1.
-. For products produced in European Community Questo apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1
- 12 -
safety 2003.12.3 4:51 AM 14 Important Safety Instructions(UL Only) 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING: To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
Optional 1. Do not place the apparatus in a rack or bookcase. Ensure that there is adequate ventilation and that you've followed that manufacturer's instructions for mounting.(For PDP or Projection TV apparatus) 2. If you place the apparatus in a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions.
- 13 -
safety 2003.12.3 4:51 AM 15 Wiring the Mains Power Supply Plug(UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse coverx is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock ha ard from the bared flexible cord. IMPORTANT The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW. Russia Only - PCT Notice MPR II Compliance (MPR II applied model only) This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields.
EPA applied model only As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guidelines for energy efficiency.
- 14 -
safety 2003.12.3 4:51 AM 16 TCO'95-Ecological requirements for personal computers (TCO'95 applied model only) AB general requirements AB2 Written Eco-document acompanying the products Congratulations! You have just purchased a TCO'95 approved and labelled product!
Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally-adapted electronic products. Why do we have environmentally-labelled monitors?
In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment.The main problem as far as monitors and other electronic equipment are concerned is that environmentally harmful substances are used both in the products and during their manufacture. Since it has not been possible so far for the majority of electronic equipment to be recycled in a satisfactory way, most of these potentially damaging substances sooner or later enter Nature. There are also other characteristics of a monitor, such as energy consumption levels, that are important from both the working and natural environment viewpoints. Since all types of conventional electricity generation have a negative effect on the environment (acidic and climate-influencing emissions, radioactive waste, etc.) it is vital to conserve energy. Electronic equipment in offices consumes an enormous amount of energy, since it is often routinely left running continuously. What does labelling involve?
This product meets the requirements for the TCO'95 scheme, which provides for international environmental labelling of monitors. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) and NUTEK
(The National Board for Industrial and Technical Development in Sweden). The requirements cover a wide range of issues: environment, ergonomics, usability, emission of electrical and magnetic fields, energy consumption and electrical and fire safety. The environmental demands concern among other things restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons), and chlorinated solvents. The product must be prepared for recycling and the manufacturer is obliged to have an environmental plan, which must be adhered to in each country where the company conducts its operations policy. The energy requirements include a demand that the monitor after a certain period of inactivity shall reduce its power consumption to a lower level, in one or more stages. The length of time to reactivate the monitor shall be reasonable for the user. Labelled products must meet strict environmental demands, for example in respect of the reduction of electric and magnetic fields, along with physical and visual ergonomics and good usability. TCO Development Unit 1996-11-29 On the page this folder you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from:
TCO Development Unit S-11494 Stockholm Sweden Fax: +46 8 782 92 07 E-mail (Internet): development@ tco.se Current information regarding TCO'95-approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/
TCO'95 is a co-operative project between(3 logos)
- 15 -
safety 2003.12.3 4:51 AM 17 Environmental Requirements Brominated flame retardants are present in printed circuit boards, cables, wires, casings and housings. In turn, they delay the spread of fire. Up to thirty percent of the plastic in a computer casing can consist of flame retardant substances. These are related to another group of environmental toxins, PCBs, which are suspected to give rise to similar harm, including reproductive damage in fish eating birds and mammals, due to the bioaccumulative processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO'95 demand requires that plastic components weighing more than 25 grams must not contain organically bound chlorine and bromine. Lead Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. TCO'95 requirement Permits the inclusion of lead since no replacement has yet been developed. Cadmium Cadmium is present in rechargeable batteries and in the colour generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. TCO'95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The colour-generating layers of display screens must not contain any cadmium. Mercury Mercury is sometimes found in batteries, relays and switches. Mercury damages the nervous system and is toxic in high doses. TCO'95 requirement states that batteries may not contain more than 25 ppm (parts per million) of mercury. It also demands that no mercury is present in any of the electrical or electronics components concerned with the display unit. CFCs (freons) CFCs (freons) are sometimes used for washing printed circuit boards and in the manufacturing of expanded foam for packaging. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on Earth of ultraviolet light with consequent increased risks of skin cancer
(malignant melanoma). The relevant TCO'95 requirement: Neither CFCs nor HCFCs may be used during the manufacturing of the product or its packaging. The relevant TCO'95 requirement: Neither CFCs nor HCFCs may be used during the manufacturing of the product or its packaging. TCO'99-Ecological requirements for personal computers (TCO'99 applied model only) Congratulations!
You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO'99 scheme which provides for an international environmental and quality labelling labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO(The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen(The Swedish Society for Nature Conservation), Statens Energimyndighet
(The Swedish National Energy Administration) and SEMKO AB. The requirements cover a wide range of issuse: environment, ergonomics, usability, reduction of electric and magnetic fields, energy consumption and electrical safety.
- 16 -
safety 2003.12.3 4:51 AM 18 Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-
influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labelling involve?
The environmental demands has been developed by Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation). These demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs(freons)and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from:
TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as today there is no commercially available alternative. TCO aims on removing this exception when a Mercury free alternative is available. CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence. Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed.
- 17 -
safety 2003.12.3 4:51 AM 19 TCO'03-Ecological requirements for personal computers (TCO'03 applied model only) Congratulations!
The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO'03 Display requirements:
Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions
Electromagnetic fields
Noise emissions Ecology
The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000
Restrictions on o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, Please visit www.tcodevelopment.com
- 18 -
safety 2003.12.3 4:51 AM 20 TCO'03 Recycling Information (TCO'03 applied model only)
[European Residents Only]
For recycling information for TCO'03 certified monitors, for the residents in the following countries, please contact the company corresponding to your region of residence. For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way. U.S.A. Residents Only European Residents Only U.S.A. SWEDEN NORWAY GERMANY COMPANY Solid Waste Transfer &
Recycling Inc ADDRESS 442 Frelinghuysen Ave Newark, NJ 07114 ELKRETSEN Elektronikkretur AS vfw AG ELKRETSEN Box 1357, 111 83 Stockholm Barnhusgatan 3, 4 tr. 6454 Etterstad 0602 Oslo Fyrstikkalln 3B Max Plank Strasse 42 50858 Collogne Germany TELEPHONE FAX E-MAIL HOME PAGE 973-565-0181 08-545 212 90 23 06 07 40 49 0 2234 9587 - 0 Fax: 973-565-9485 none http://www.bcua.org/Solid Waste_Disposal.htm 08-545 212 99 info@el-kretsen.se http://www.el-
kretsen.se/
23 06 07 41 adm@elektronikkretur.no http://www.elretur.no/
vfw.info@vfw-ag.de Medical Requirement (Medical applied model only) N Classifications:
In accordance with UL 2601-1/IEC 60601-1, the product is classified as Continuous duty Class I equipment, which is not protected against ingress of liquids. The product is not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide. EMC This equipment has been tested and found to comply with the limits for medical devices to the IEC 601-1-2:1994. These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the equipment.
Connect the equipment into an outlet on a circuit different from that to which the other device (s) are connected.
Consult the manufacturer or field service technician for help. Video In / RS 232 / Video Out Accessories equipment connected to the analog and digital interfaces must be certified to the respective IEC standards (i.e. IEC 950 for data processing equipment and IEC 601-1 for medical equipment.) Furthermore all configurations shall comply with the system standard IEC 601-1-1. Everybody who connects additional equipment to the signal input part or signal output part configures a medical system, and is therefore, responsible that the system complies with the requirements of the system standard IEC 601-1-1. If in doubt, consult the technical services department or your local representative. Transport and Storage Limitations:
Temperature Range of -40C to +70C Relative Humidity of 10 -95%, non-condensing
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
- 19 -
safety 2003.12.29 9:44 PM 21 ELECTRONICS AA68-03242A-00
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2004-05-13 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2004-05-13
|
||||
| 1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0027908797
|
||||
| 1 | Physical Address |
19 Chapin Rd., Building D
|
||||
| 1 |
Pine Brook, New Jersey 07058
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
| 1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
A3L
|
||||
| 1 | Equipment Product Code |
AT50L7
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J**** C******
|
||||
| 1 | Title |
General Manager
|
||||
| 1 | Telephone Number |
973-8********
|
||||
| 1 | Fax Number |
973-8********
|
||||
| 1 |
j******@samsung.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
| 1 | Name |
R****** O******
|
||||
| 1 | Physical Address |
6660-B Dobbin Road
|
||||
| 1 |
Columbia, Maryland 21045
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
410-2********
|
||||
| 1 | Fax Number |
410-2********
|
||||
| 1 |
r******@pctestlab.com
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DLP Projection TV | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Max. Resolution: 1280 x 720 | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Nemko Korea Co., Ltd
|
||||
| 1 | Name |
H******** K****
|
||||
| 1 | Telephone Number |
82-33********
|
||||
| 1 | Fax Number |
82-33********
|
||||
| 1 |
y******@nemkokorea.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15B | 16 19 CE | ||||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC