all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.98 MiB | December 02 2003 | |||
1 |
|
Users Manual per CRN 7160 | Users Manual | 444.90 KiB | / December 02 2003 | |||
1 | Attestation Statements | December 02 2003 | ||||||
1 | Attestation Statements | December 02 2003 | ||||||
1 | Cover Letter(s) | December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | External Photos | December 02 2003 | ||||||
1 | ID Label/Location Info | December 02 2003 | ||||||
1 | Internal Photos | December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | RF Exposure Info | December 02 2003 | ||||||
1 | Test Report | December 02 2003 | ||||||
1 | Test Report | December 02 2003 | ||||||
1 | Test Setup Photos | December 02 2003 |
1 | User Manual | Users Manual | 3.98 MiB | December 02 2003 |
* Some contents in this manual may differ from your phone depending on the software of the phone or your service provider. TDMA MOBILE TELEPHONE STH-A325 Draft version
(2002/10/30) The reference page number and index will updated when the manual is complete. www.samsungmobile.com Printed in Korea Code No. : GH68-xxxxxA English. 11/2002. Rev. 1.0 Please, be sure to read this manual before using your phone. And keep the manual after reading it and use any time you have a question. FCC RF EXPOSURE INFORMATION Contents In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-
clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user's body and the back of the phone. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Contact your local dealer for optional accessory items. Vehicle Mounted External Antenna (optional, if available.) A minimum separation distance of 7.9 inches (20cm) must be maintained Between a person and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC website at www.fcc.gov Unpacking. 7 Your Phone Phone Layout. 8 Display. 11 Getting Started Installing the Battery . 14 Charging the Battery . 16 Switching the Phone On/Off . 18 Locking Your Phone . 19 Call Functions Making a Call. 20 Making a Call from the Phonebook . 21 Redialing the Last Number . 21 Adjusting the Volume . 22 Answering a Call . 23 Viewing Missed Calls . 24
. 26 Quickly Switching to Silent Mode Selecting Functions and Options Using the Soft Keys . 27 Selecting Functions and Options . 28 Example: Setting the Display Language . 29 Phonebook Storing a Phone Number with a Name . 32 Speed Dialing by Memory Location . 33 Entry Options . 34 Searching for a Number in the Phonebook . 37 Phonebook Options . 38 1 Entering Text Changing the Text Input Mode . 42 Using the T9 Mode . 43 Using the Upper/Lower-case Character Mode . 44 Using the Number Mode . 45 Options During a Call Muting/Sending Key Tones. 46 Searching for a Number in the Phonebook . 47 Using the SMS Service . 48 Making a Calling card call . 48 Making a Private Voice Call . 49 Putting a Call on Hold. 49 Answering a Second Call . 50 Making a 3-way Conference Call . 51 Using the Menus Accessing a Menu Function by Scrolling . 52 Accessing a Menu Function by Using its Shortcut . 53 List of Menu Functions . 54 Call Records Missed Calls (Menu 1.1) . 58 Incoming Calls (Menu 1.2) . 58 Outgoing Calls (Menu 1.3). 59 Call Time (Menu 1.4). 59 Messages Voice Mail (Menu 2.1). 60 Read Messages (Menu 2.2) . 61 Write Messages (Menu 2.3) . 63 Preset Message List (Menu 2.4) . 64 Setup (Menu 2.5) . 65 Picture Message (Menu 2.6). 66 Receiving Pictures, Ring Tones or Caller Line Icons . 68 Tones Ring Tone (Menu 3.1) . 71 Ring Volume (Menu 3.2) . 71 Alert Type (Menu 3.3) . 72 Keypad Tone (Menu 3.4) . 72 Message Tone (Menu 3.5) . 73 Error Tone (Menu 3.6). 73 Minute Minder (Menu 3.7) . 74 Connect Tone (Menu 3.8) . 74 Function Sound (Menu 3.9). 75 Settings Infrared Activate (Menu 4.1). 76 LCD Display Control (Menu 4.2). 77 Auto Redial (Menu 4.3) . 79 Active Folder (Menu 4.4). 80 Language (Menu 4.5) . 80 Reset Settings (Menu 4.6). 81 Calling card (Menu 4.7) . 81 Short Cut Key (Menu 4.8) . 84 Organizer Calendar (Menu 5.1). 85 To Do List (Menu 5.2) . 87 Time & Date (Menu 5.3) . 89 Alarm (Menu 5.4) . 91 Calculator (Menu 5.5) . 92 Security Change Lock Code (Menu 6.1) . 93 Change Security Code (Menu 6.2). 93 Call Restriction (Menu 6.3) . 94 SOS Call List (Menu 6.4) . 95 2 3 Network Services Call Diverting (Menu 7.1) . 96 Call Waiting (Menu 7.2) . 97 Network Selection (Menu 7.3) . 98 Voice Privacy (Menu 7.4) . 99 NAM Selection (Menu 7.5) . 99 Set Service Code (Menu 7.6) . 100 Public System Selection (Menu 7.7) . 101 Games . 102 Voice Functions Voice Dial (Menu 10.1) . 103 Voice Memo (Menu 10.2) . 105 Solving Problems . 107 Health and Safety Information . 109 Glossary. 124 Index . 127 Quick Reference Card . 131 Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. For more detailed safety information, see Health and Safety Information on page 109. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refueling Do not use the phone at a refueling point (service station) or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch off your phone near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). 4 5 SSaaffeettyy QQuuiicckk GGuuiiddee Radio frequency exposure information In August 1996, the Federal Communications Commission (FCC) of the U.S. adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. The design of this phone complies with the FCC guidelines and these international standards. Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Accessories and Batteries Use only Samsung-approved accessories and batteries. Qualified Service Only qualified service personnel may install or repair your phone. Unpacking Your package contains the following items:
Handset Travel Charger Battery Hand Strap Users Manual The illustrations above may look different from your phone and accessories. In addition, you can obtain the following accessories for your phone from your local Samsung dealer:
Hands-free kit Standard battery Cigarette lighter adapter Ear-microphone Leather case 6 7 Your Phone Phone Layout The following illustrations show the main elements of your phone. Closed view YYoouurr PPhhoonnee Antenna External display Infrared port Open view Folder Navigation keys Ear-microphone jack Soft key (left) Volume keys Dial/menu confirmation key Cancel/
correction key Special function keys 8 Earpiece Display WAP Browser Key Soft key (right) Power on/off key Alphanumeric keys Microphone Key Description Perform the functions indicated by the text above them on the bottom line of the display.
(soft keys) In menu mode, scroll through the menu options and phonebook memory. In idle mode, enter your favorite menus directly. For more information about shortcut keys, see page 83. In menu mode, returns to the previous menu level and selects the current menu respectively. In idle mode, enter your favorite menus directly. For more information about shortcut keys, see page 83. When entering text, moves the cursor to the left and to the right respectively. Makes or answers a call. In idle mode, enters the Last Call logs. Also, redials the last number you dialed when held down. 9 YYoouurr PPhhoonnee YYoouurr PPhhoonnee Key Description (continued...) Deletes characters from the display. In menu mode, returns to the previous menu level. In idle mode, quickly enters or exits silent mode when held down. Ends a call. Also switches the phone on and off when held down. In menu mode, cancels your input and returns to idle mode. In idle mode, allows you to quickly access your voice mail box when held down. Enter numbers, letters and some special characters.
Enter special dial characters. Also use these keys for various purposes in different functions.
(on the side of the phone) During a call, adjust the earpiece volume. In idle mode with the folder open, adjust the key volume. In menu mode, scroll through the menu options or Phonebook memory. Display Layout The display comprises three areas. Icons Text and graphic area Soft key indications Menu Names Area Description First line Displays various icons (see page 12). Middle lines Display messages, instructions and any information that you enter, number to be dialed, for example. Last line Shows the functions currently assigned to the two soft keys. 10 11 YYoouurr PPhhoonnee Backlight The display is illuminated by a backlight. When you press any key or open the folder, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Back Light option set in the Lcd Display Control menu. To specify the length of time for which the backlight is active, set the Back Light menu option (Menu 4.2.4); see page 77 for further details. You can also set the phone to use the backlight only during a specified period of time in the Auto Light menu option (Menu 4.2.5); see page xx for further details. External Display Your phone has an external display on the folder. It indicates that you have an incoming call or a message, and notifies you at the specified time when you have set an alarm. YYoouurr PPhhoonnee Icons Icon Description Shows the received signal strength. The greater the number of bars, the better the signal. Appears when a call is in progress. Appears when a new text message is received. Appears when silent mode is active and when the Alert Type menu option (Menu 3.3) is set to Vibration or Vibra +
Melody. Appears when you set an alarm. Shows the level of your battery. The more bars you see, the more power you have left. Appears when you are out of your home area and have registered onto a different network; when travelling in other countries, for example. Appears when a new voice mail message is received. Appears when you activate mute mode. Appears when the IrDA port is active. For details, see page 83. 12 13 Getting Started Installing the Battery To Install the Battery 1. Insert the battery as shown to fit the tabs on the battery into the notches on the bottom of the phone. 2. Press down the battery until it clicks into place. GGeettttiinngg SSttaarrtteedd To Remove the Battery 1. If necessary, switch the phone off by holding key until the power-off image down the begins to play. 2. Remove the battery. To do so:
pull the catch above the battery upwards and hold it in the position, then take the battery out of the phone. It will easily lift out. 14 15 GGeettttiinngg SSttaarrtteedd Charging the Battery Your phone is powered by a rechargeable Li-Ion battery. A travel charger is provided with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. The phone can be used while the battery is charging. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 1. With the battery in position on the phone, plug the connector of the travel charger into the jack at the bottom of the phone. 2. Plug the charger into a standard AC wall outlet. 16 GGeettttiinngg SSttaarrtteedd 3. When charging is finished (the lamp on the charger turns green), unplug the charger from the power outlet and remove it from the phone by squeezing the two tabs on the connector () and unplug the connector (). Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, you will hear a warning tone and the following message will be repeated at regular intervals on the display, along with the empty battery icon:
**Warning**
Low Battery Menu Names When the battery becomes too weak for the phone to operate, it switches off automatically. 17 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd Switching the Phone On/Off Locking Your Phone 1. Open the folder. 2. Hold down the key for more than one second to switch the phone on. 3. The phone searches for your service system. When it finds the system, the idle screen, illustrated below, appears on each display. Service Provider 12:57 Sat 14 Mar 12:57 Sat/14 Menu Names Note: To change the language, use the Language menu option (Menu 4.5); for further details, refer to page 80. 4. When you wish to switch the phone off, hold down the key for more than two seconds. 18 You can lock your phone to protect it against unauthorized use. When your phone is locked, you cannot use the phones features until you enter the lock code. To lock your phone:
key for more than two Press and hold down the seconds in idle mode. Phone Locked appears on the idle screen. Service Provider Phone Locked Sat 14 Mar Unlock SOS To unlock the phone:
Press the Unlock soft key, enter the 4-digit lock code and then press the OK soft key. Your phones lock code is preset to 0000 at the factory. For further details about the lock code, see page 92. Even if the phone is locked, you can place an SOS call to one of the emergency numbers stored in the SOS Call List (Menu 6.4). See page 94 for further details. To place an SOS call, press the SOS soft key, select an emergency number by pressing the key and press the Yes soft key. or 19 Call Functions Making a Call When the idle screen is displayed, enter the area code and phone number and press the key. Note: If you have set the Auto Redial menu option
(Menu 4.3) to ON (see page 79), the number is automatically redialed up to ten times when the person you called does not answer or is already on the phone. If the network answers the call by voice mail greeting, the phone will not attempt to redial. Correcting the Number To clear Press the the last digit displayed any other digit in the number the whole display C key. or key until the cursor is immediately to the right of the digit to be cleared. Press the C key. You can also insert a missing digit simply by pressing the appropriate key. C key and hold down for more than two seconds. Ending a Call When you want to finish your call, briefly press and release the key or close the folder. 20 CCaallll FFuunnccttiioonnss Making a Call from the Phonebook You can store the frequently-dialed phone numbers with an appropriate name in the phone memory, which is called Phonebook. You then simply select the required name to recall the associated number. For further details about the Phonebook feature, refer to page 32. Redialing the Last Number The phone stores the last 10 numbers dialed. To recall any of these numbers:
1. If you have typed any characters on the display, press the key to return to idle mode. 2. Press the numbers. key to display the last dialed 3. Press the or key to scroll through the numbers until the required number displays. 4. To dial the number displayed edit the number displayed Press the key. Edit soft key and change the number, referring to Correcting the Number for details (see page 20). Save soft key to save the key to number or the dial the number. 21 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Adjusting the Volume Answering a Call During a call, if you want to adjust the earpiece volume, use the volume keys on the left side of the phone. Press the key to increase the volume level and the key to decrease the level. The more bars you see, the louder the sound is. When somebody calls you, the phone rings and the following screens appears on each of the displays. In idle mode with the folder open, you can adjust the keypad tone volume using the keys. and Accept If the caller can be identified, the callers phone number or name, if stored in your Phonebook, is displayed. 1. Open the folder. Then, press the Accept soft key. key or the 2. End the call by closing the folder or pressing the key. Note: You can answer a call while using the Phonebook or menu features. The current operation will be interrupted. 22 23 CCaallll FFuunnccttiioonnss Viewing Missed Calls If you are unable to answer a call for any reason, you can find out who was calling you, provided that the Caller Line Identification service is available, so that you can call the person back, if necessary. The number of missed calls is displayed on the idle screen immediately after the call was missed. To view the missed call immediately:
1. If the folder is closed, open it. 2. Press the View soft key. The number corresponding to the most recent missed call is displayed, if available. 3. To scroll through the missed calls call the number displayed edit or delete a missed call number Press the or key. key. Options soft key
(refer to the following page). 24 CCaallll FFuunnccttiioonnss Editing a Missed Call Number Note: If the callers number associated with the missed call is not available, the Edit option is not displayed. 1. Press the Options soft key. 2. If necessary, press the highlight the Edit option. 3. Press the Select soft key. or key to 4. Change the number as required. 5. To... call the number store the number Press the... key. Save soft key and enter the name and location required (for further details, refer to page 32). Deleting a Missed Call 1. Press the Options soft key. 2. If necessary, press the Delete option. or key to highlight 3. Press the Select soft key. You can press the Missed Call feature. Note: You can access the Missed Call feature at key at any time to exit the any time by selecting the Missed Calls menu option (Menu 1.1); for further details, see page 58. 25 CCaallll FFuunnccttiioonnss Quickly Switching to Silent Mode You can quickly switch your phone to silent mode with a touch of a key to mute the phones sound. Press and hold the C key until the Silent Mode appears on the display. Your phone goes to silent mode immediately. icon and In silent mode, your phone switches the sound settings as listed below:
Option New setting Alert Type (Menu 3.3) Vibration Keypad Tone (Menu 3.4) off Message Tone (Menu 3.5) Vibration Error Tone (Menu 3.6) Minute Minder (Menu 3.7) Connect Tone (Menu 3.8) OFF OFF OFF To exit silent mode, press and hold the C key again until Exit Silent Mode appears. This feature is convenient when you are in a hurry to mute the phone sound, such as when in a theater. Selecting Functions and Options Using the Soft keys Your phone offers a set of functions that allow you to customize your phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked . Each menu and sub-
menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the current context; the label on the bottom line of the display just above each key indicates its current role. Example:
Service Provider 12:57P Sat 14 Mar Menu Names 26 Press the left soft key to enter menu mode. Press the right soft key to search a Phonebook entry by entering its name. 27 SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss Selecting Functions and Options Example: Setting the Display Language To view the various functions/options available and select the one required:
1. Press the appropriate soft key. 1. When the idle screen is displayed, press the Menu soft key to enter menu mode. 2. To select the:
function displayed or option highlighted Press the Select soft key or key. Service Provider 12:57 Sat 14 Mar Menu Names view the next function or highlight the next option in a list move back to the function or option in a list move back up one level in the structure C key. exit the structure without changing the settings key or key on the left side of the phone. key or key on the left side of the phone. key, soft key or key. In some functions, you may be asked for a lock code or security code. Enter the required code and press the OK soft key. 2. Scroll through the menus until you reach the Settings menu, by pressing the or key. Messages Tones Settings Select 4 3. To select the Settings menu, press the Select soft key or the key. Settings Infrared Act... Lcd Display C... Auto Redial Active Folder Language Reset Settings Select 4.1 28 29 SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnss 7. Scroll through the list of the languages until the appropriate one is highlighted, by pressing the or key. 8. Press the Select soft key or the key to confirm your selection. 9. Press the C or key twice to exit the menu structure. 4. Scroll through the sub-menus until you reach the Language sub-menu, by pressing the or key. Settings Infrared Act... Lcd Display C... Auto Redial Active Folder Language Reset Settings Select 4.5 5. To select the Language menu, press the Select soft key or the key. Language Text Langua... Voice L English Input Mode Current language Select 4.5.1 6. When Text Language highlights, press the Select soft key or the is highlighted. key. The current setting Current language Text Language English Espaol Portugus Select 4.5.1.1 30 31 Phonebook The Phonebook allows you to store frequently used phone numbers and the associated names in your phone to make it easy for you to make a call without having to remember or enter the phone number. You can store up to 500 (1 ~ 500) entries. Storing a Phone Number with a Name As soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in the Phonebook. 1. Enter the number to be stored. Note: If you make a mistake while entering a number, correct it using the C key. For further details, refer to page 21. 2. When you are sure that it is correct, press the Save soft key. 3. Select a label of your number by pressing the or key, and press the Select soft key. The available labels are Home, Office, Mobile, Pager, Fax and E-Mail. 4. Enter the corresponding name. For information about how to enter characters, see page 41. 5. Press the OK soft key. The phone now prompts you to select a location in the phone memory. 32 PPhhoonneebbooookk 6. If necessary, press the C key to clear the displayed number and enter a location number by pressing the number keys. 7. Press the OK soft key. The entry is saved and the display shows the name and number you just have saved. 8. To make a call to the displayed number, press the key. To send an SMS message to the displayed number, press the for further details about sending a message. SMS soft key. See page 63 To access the Entry options, press the Options soft key. See page 34 for further details. 9. Press the key to return to the idle screen. Speed-dialing by Memory Location Once you have stored phone numbers in the Phonebook memory, you can dial them easily whenever you want. To speed dial the desired number:
For the 1-digit memory location number (1 through 9), press and hold the appropriate digit down. For the 2 or more-digit memory location number (10 through 500), press first digit(s) briefly and hold the last digit down. 33 PPhhoonneebbooookk PPhhoonneebbooookk Note: If you enter the location number and press the key, your phone displays the details on the entry, such as name, number, location number and label. If you have stored more than one number for a name, scroll through the entry by pressing the key repeatedly. or Entry Options When you are viewing an entry in the Phonebook, Options appears above the right soft key to allow you to access various entry options. Accessing the Options To access the Entry options:
1. While viewing a Phonebook entry, press the Options soft key. The first available option is highlighted. 2. To select the highlighted option highlight a different option Press the Select soft key. or key until the required option is highlighted. Add Number This option allows you to store up to seven numbers per entry by assigning them to different categories. Note that you cannot duplicate same categories for one entry. For example, you can only have one number labeled Mobile for the selected entry. Change Name This option allows you to change the name for the number. Clear the old name by pressing the C key and enter a new name. For information about entering characters, see page 41. Change Number This option allows you to change the number. Clear the old number by pressing the C key and enter a new number. Change Type This option allows you to change the label type of a stored number. Note that you cannot duplicate same categories for one entry. For example, you can only have one number labeled Mobile for the selected entry. Caller Group This option allows you to set the number as a member of the caller group. Select a caller group from the list. For more details about the Caller Group feature, see page 38. 34 35 PPhhoonneebbooookk PPhhoonneebbooookk Erase Number This option allows you to erase a stored number. If you saved two numbers under a name, only the currently selected number will be erased. You are asked to confirm that you wish to erase the number by pressing the Yes soft key. Erase Name This option allows you to erase a name stored in the Phonebook so that all numbers under the name are erased. You are asked to confirm that you wish to erase the name by pressing the Yes soft key. Move This option allows you to move a Phonebook entry to another location. When prompted, enter the location number to which you are moving the number, and press the OK soft key. Set Priority NO. This option allows you to set the selected number as a speed dial number for the entry if it has more than one number. Press the Set soft key. 36 Searching for a Number in the Phonebook 1. When the idle screen is displayed, press the Names soft key. You are asked to enter a name. 2. Enter the first few letters of the name that you want to find and press the Search soft key. Note: You can also scroll through all Phonebook entries by pressing the Search soft key directly. The Phonebook entries are listed, starting with the first entry matching your input. 3. To... view the highlighted entry select a entry look for a name starting with a different letter Press the... View soft key. or key different until the required entry is highlighted. key labeled with the required letter. 4. Once you have found the required entry, press the key to dial the number. SMS soft key. See page 63 To send an SMS message to the displayed number, press the for further details about sending a message. To access the Entry options, press the Options soft key. See page 34 for further details. 37 PPhhoonneebbooookk Phonebook Options When you access your Phonebook by pressing the Names soft key, Options appears above the right soft key. This key allows you to enter the options for the Phonebook. Accessing the Options 1. In idle mode, press the Names soft key. 2. Press the Options soft key. The first available option is highlighted. 3. To... select the highlighted option highlight a different option Press the... Select soft key. or key until the required option is highlighted. New Entry This option allows you to create a new entry in the Phonebook. For details about storing a phone number, see page 32. Caller Group You can set the phone to ring by a specific ringer and display a preselected graphic icon when a person calls you. To do so, you need to:
define your caller groups assign the numbers in the Phonebook to the appropriate group 38 PPhhoonneebbooookk Defining a caller group Select the group to be defined and set the appropriate options. The following options are available:
Call ring tone: allows you to select the ring tone to be used when you receive a voice call from a person in the group. SMS tone: allows you to select the ring tone to be used when you receive a text message from a person in the group. Graphic: allows you to select the graphic icon to be displayed when you receive a call from a person in the group. Group Name: allows you to assign a name to the group; for further details about how to enter characters, refer to page 41. Assigning numbers to a group 1. View the required number in the Phonebook. 2. Press the Options soft key. 3. Select the Caller Group option. 4. Select the required group. To remove a number from a group, select the No Group option. 39 PPhhoonneebbooookk Own Number This function is a memory aid, which you can use to check your own phone number if you need to do. Memory Status You can check the used memory and free memory you have for the Phonebook. The display shows how many entries are currently stored and can be saved in future in the Phonebook. Erase All This option allows you to erase all of the Phonebook entries. When a confirming message appears, press the Yes soft key to erase all Phonebook entries. To cancel, press the Cancel soft key. When prompted, enter the lock code. All entries in the Phonebook are then erased. Entering Text When using your phone, you will often need to enter text, for example, when storing a name in the phonebook, entering a text message or scheduling events in your calendar. You can enter alphanumeric characters by using your phones keypad. You are provided with the following text input modes:
T9 mode This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter - when you press the key once, J, K or L may be displayed. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional upper/lower-case character modes. Upper/lower-case character modes These modes allow you to enter letters by pressing the key labeled with the required letter once, twice or three times until the letter displays. Number mode This mode allows you to enter numbers. 40 41 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Changing the Text Input Mode Using the T9 Mode When you are in a field that allows characters to be entered, you will notice the text input mode indicator on the display. Example: When you are entering message text l Text input mode indicator OK 160 To select... Press the until... soft key Upper-case characters Lower-case characters Numbers only The T9 mode is displayed. See page 44. is displayed. See page 44. is displayed. See page 45. is displayed. See page 43. The T9 predictive text input mode allows you to enter any character using single keystrokes. This text input mode is based on a built-in dictionary. 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys
. Press each key only once for one to letter. Example: to enter HELLO in the T9 mode, press
, and
. The word that you are typing appears on the display. It may change with each key that you press. 2. Enter the whole word before editing or deleting any keystrokes. 3. If the word is correct, start entering the next word.
, or key Otherwise, press the repeatedly to display alternative word choices for the keys that you have pressed. Example: Both OF and ME have the key sequence
. The phone displays the of most commonly used choice first. and 4. Put a space between each word by pressing the key. To type words not found in the T9 mode, change the text input mode to the upper/lower-case character input mode. 42 43 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt To enter full stops, hyphens or apostrophes, press
. The T9 mode applies grammar rules to ensure that the correct punctuation is used. Example:
is used twice to display two punctuation marks:
Refer to the table below for more information on the characters available using the keys. Key Characters in the Order Displayed Upper Case Lower Case L E T S E A T . To shift the case in the T9 mode, use the key. You can move the cursor by using the and keys. To delete letters, press the C key. Press and hold down the C key to clear the display. Using the Upper/Lower-case Character Mode Use the keys to to enter your text. 1. Press the key labeled with the required letter:
Once for the first letter Twice for the second letter And so on Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to move automatically to the right and then select the next letter. 2. Select other letters in the same way. 1 2 3 4 5 6 7 8 9 0
Space 1 A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 P Q R S 7 T U V 8 W X Y Z 9 0
Space 1 a b c 2 d e f 3 g h i 4 j k l 5 m n o 6 p q r u v 8 w x y z 9 0
s 7
To insert a space, press the key.
You can move the cursor by using the and keys. To delete letters, press the C key. Press and hold down the C key to clear the display. Using the Number Mode The Number mode enables you to enter numbers in a text message; entering a telephone number for example. Press the keys corresponding to the required digits before manually switching back to the appropriate text input mode. 44 45 Options During a Call Your phone provides a number of control functions that you can use during a call. Muting/Sending Key Tones You can turn the key tones which were generated each time you press a key off or on. To turn the key tone off:
1. During a call, press the Options soft key. or 2. Press the key to select the Mute Keys option. Now, the option is replaced with Send Keys. 3. Press the OK soft key. Your phone does not send the key tones. It allows you to press keys without hearing annoying key tones during a call. To turn the key tone on:
1. During a call, press the Options soft key. OOppttiioonnss DDuurriinngg aa CCaallll Searching for a Number in the Phonebook You can search for a number in the Phonebook during a call. 1. During a call, press the Options soft key. 2. Press the or Phonebook option. key to select the 3. Press the OK soft key. The Phonebook entries are listed. 4. Enter the name that you wish to find. If you enter the first few letters of the name, the Phonebook entries are listed, starting with the first entry matching your input. The entry is also highlighted. 5. To view the highlighted entry, press the View soft key. For more detailed description of the Phonebook feature, refer to page 32. or 2. Press the key to select the Send Keys option. Now, the option is replaced with Mute Keys. 3. Press the OK soft key. Note: To communicate with answering machines or computerized telephony systems, the Send Keys option must be selected. 46 47 OOppttiioonnss DDuurriinngg aa CCaallll OOppttiioonnss DDuurriinngg aa CCaallll Using the SMS Service Making a Private Voice Call If you receive an SMS (Short Message Service) message during a call, the icon display. The SMS Service option enables you to use this feature. You can also create and send an SMS message during a call. flashes on the Read Messages: allows you to read the messages that you have received. Write Messages: allows you to write a message. For further details about the SMS service, refer to page 60. Making a Calling Card Call If you save the calling card information in the Calling Card menu option (Menu 4.7), you can send automatically the code number required for the service when you make a call using the prepaid calling card. Use the Callcard Service option. For further details about making a calling card call, refer to page 80. You can make the current call private so that nobody eavesdrops your call. 1. During a call, press the Options soft key. 2. Press the or key to select the Voice Privacy option. 3. Press the Select soft key. 4. Press the Deactivate. or key to select Activate or Select Activate to secure your call or Deactivate not to do. 5. Press the Select soft key. Putting a Call on Hold You can make another call while you have a call in progress, if this service is supported by the network. Of two calls, one is active and the other is on hold and you can switch between the calls. Note: The procedure to put a call on hold may vary depending on your network. For further details, contact your service provider. 48 49 OOppttiioonnss DDuurriinngg aa CCaallll OOppttiioonnss DDuurriinngg aa CCaallll To make a call while you have a call in progress:
1. During a call, key in the phone number that you wish to dial or look it up in the Phonebook. 2. Press the key to dial the second call. The first call is automatically put on hold. 3. To switch between the two calls, simply press the key. 4. To end the current call, press the key. Answering a Second Call You can answer an incoming call while you have a call in progress, if this service is supported by the network and you have set the Call Waiting menu option (Menu 7.2) to Activate (see page 96). You will be notified of an incoming call by a call waiting tone. To answer a call while you have a call in progress:
1. When you hear a call waiting tone, press the key to answer the incoming call. The first call is automatically put on hold. 2. To switch between the two calls, press the key. 3. To end the current call, press the key. Making a 3-way Conference Call You can conduct conference calls with two separate parties at the same time. A conference call is a network service. For more information, contact your service provider. Note: The procedure may vary depending on your network. Contact the service provider for details. 1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold. 3. When the second person answer, press the key to merge the calls. 4. End the conference call by closing the folder or pressing the key. During a conference call, if one of the callers hangs up, you and the remaining caller will stay connected. If the caller who initiated the call hangs up first, all three parties are disconnected. 50 51 Using the Menus The phone offers a range of functions that allows you to customize the phone to your needs. These functions are arranged in menus and submenus. The menus and submenus can be accessed by scrolling or by using the shortcuts. Accessing a Menu Function by Scrolling 1. In idle mode, press the Menu soft key to access menu mode. 2. Press the or key to reach the desired main menu, for example, Settings. Press the Select soft key or the key to enter the menu. 3. If the menu contains any submenus, for example, Language, find the one you want by pressing the the key to enter the submenu. key. Press the Select soft key or or If the menu you selected has submenus, repeat this step. 4. Press the or key to find the setting of your choice. Press the Select soft key or the key to confirm the selection. Notes:
You can return to the previous menu level by pressing the C key or the You can exit the menu without changing the menu settings by pressing the key. key. OOppttiioonnss DDuurriinngg aa CCaallll Accessing a Menu Function by Using its Shortcut The menu items, such as menu, submenus and setting options are numbered and can be quickly accessed by using their shortcut number. The shortcut number is shown at the bottom right next to the Note: The numbers assigned to each menu function soft key on the display. are indicated on the list on page 54. Back Light OFF Short Long Select 4.2.4.1 Shortcut number 1. In idle mode, press the Menu soft key. 2. Within three seconds, enter the first digit of the shortcut number. Repeat this for each digit of the shortcut number. Example: Setting the Back Light option to Short Press the Menu soft key, and enter 4, 2, 1, 2. Menu for entering the menu, 4 for Settings, 2 for LCD Display Control, 4 for Back Light, 2 for Short . 52 53 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss List of Menu Functions The following illustration shows the menu structure available and indicates the:
number assigned to each option. page on which you can find a description of each feature. 1. Call Records Page 58 1.1 Missed Calls 1.2 Incoming Calls 1.3 Outgoing Calls 1.4 Call Time 1.4.1 Last Call Time 1.4.2 Total Call Time 1.4.3 Display Call Time 1.4.4 Reset Timers 2. Messages 2.1 Voice Mail Page 60 2.1.1 Connect to Voice Server 2.1.2 Voice Server Number 2.2 Read Messages 2.2.1 New Inbox 2.2.2 Old Inbox 2.2.3 Outbox 2.2.4 Delete All 2.3 Write Messages 2.4 Preset Message List 2.5 Setup 2.6 Picture Messages 3. Tones Page 71 3.1 Ring Tone 3.2 Ring Volume 3.3 Alert Type 3.4 Keypad Tone 3.4.1 Volume 3.4.2 Key Sound 3.4.3 DTMF Length 3.5 Message Tone 3.6 Error Tone 3.7 Minute Minder 3.8 Connect Tone 3.9 Function Sound 4. Settings Page 77 4.1 Infrared Activate 4.2 LCD Display Control 4.2.1 Screen Mode 4.2.2 Select Image 4.2.3 Color Theme 4.2.4 Back Light 4.2.5 Auto Light 4.2.6 Contrast 4.3 Auto Redial 4.4 Active Folder 4.5 Language 4.5.1 Text Language 4.5.2 Voice Language 4.5.3 Input Mode 4.6 Reset Settings 4.7 Calling Card 4.8 Short Cut Key 54 55 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss 5. Organizer Page 84 5.1 Calendar 5.2 To Do List 5.3 Time & Date 5.3.1 Set Time 5.3.2 Set Date 5.3.3 World Time 5.3.4 Format 5.4 Alarm 5.4.1 Alarm 1 5.4.2 Alarm 2 5.4.3 Alarm 3 5.4.4 Alarm Tones 5.5 Calculator 6. Security Page 92 6.1 Change Lock Code 6.2 Change Security Code 6.3 Call Restriction 6.3.1 restrict all outgoing call 6.3.2 restrict all incoming call 6.3.3 restrict outgoing call 6.4 SOS Call List 56 7. Network Services 7.1 Call Diverting1 Page 95 7.1.1 Divert Always 7.1.2 Busy 7.2 Call Waiting1 7.3 Network Selection 7.3.1 Automatic 7.3.2 Manual 7.3.3 New Search 7.4 Voice Privacy 7.5 NAM Selection 7.6 Set Service Code 7.6.1 Call Diverting 7.6.2 Call Waiting 7.7 Public System Selection2 1 2 is shown when you set the service code in the Set Service Code menu option (Menu 7.6). may be unavailable depending on your service provider. Page 101 8. Games 8.1 AirShooting 8.2 SpaceWar 9. WWW Services For further details on the WAP browser, refer to the WAP Browser users guide supplied with the phone. 10. Voice Functions 10.1 Voice Dial 10.2 Voice Memo Page xx 57 Call Records In this menu, you can view the:
missed calls incoming calls outgoing calls call time The number and name, if available, are displayed, together with the date and time when the call was made. Note: Your phone can store up to ten numbers in each record. Missed Calls Menu 1.1 This option lets you view the last unanswered calls. Pressing the Options soft key allows you to:
edit the number, if available, and dial or save it in the Phonebook. delete the call from the list. Incoming Calls Menu 1.2 This option lets you view the last calls received. Pressing the Options soft key allows you to:
edit the number, if available, and dial or save it in the Phonebook. delete the call from the list. Outgoing Calls CCaallll RReeccoorrddss Menu 1.3 This option lets you view the last numbers dialed. Pressing the Options soft key allows you to:
edit the number and dial or save it in the Phonebook. delete the call from the list. Call Time Menu 1.4 This option lets you view the timers for calls made and received. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and so forth. The following timers are available:
Last Call Time: shows the duration of the last call. Total Call Time: shows the total duration of all calls made from or receive to your phone since the timer was last reset using the Reset Timers option. Display Call Time: allows you to set the phone to display the call time when the call is made or received. Select Enable to display the call time and Disable not to display it. Reset Timers: allows you to reset the call timers;
you must first enter the phones security code (see page 93) and then press the OK soft key. 58 59 Messages The SMS (Short Message Service) function is a network service and may not be supported by your network. Messages can be sent by text, fax and messaging systems, provided that these services are supported by your network. When you receive new text messages, the appears on the top line of the display. If the message memory is full, an error message is displayed and you cannot receive any new message. icon Your phone also has the function to allow you to receive messages containing pictures, ring tones or caller group icon. For details about receiving these messages, see page 68. Voice Mail Menu 2.1 This menu provides you with a way of accessing your voice mailbox, if provided by your network. Note: Please contact your service provider for more information. Depending on the service provider, you may be charged for accessing the voice server. Connect to Voice Server: Before using this feature, you must enter the voice server number obtained from your service provider (see menu option 2.1.2). You can then select this option to listen to your voice mails. 60 MMeessssaaggeess Note: You can connect to the voice mail server of the service provider quickly by pressing and holding down the key in idle mode. Voice Server Number: allows you to change the voice mail server number. To enter the server number Press the corresponding numeric keys. correct a digit C key. save the entered number Save soft key. Read Messages Menu 2.2 Three message boxes are available:
New Inbox: used to store the messages that you have received but not read. Old Inbox: used to store the messages that you have received and read. Outbox: used to store the messages that you have already sent or will send. 1. Select the required box. The first message in the box is displayed with the following information:
message number message status; New, Old, Not Sent, Sent If you have set the Delivery Ack menu option to ON, the report is also shown; see page 66 for further details. date and time when the message was received
(Inboxes only) 61 MMeessssaaggeess 2. Press the or you want to read. key to select the message 3. To view the message, press the View soft key. The screen shows the:
senders phone number if the message was sent, or recipients phone number message text 4. To scroll through the message text, press the or key. While you are viewing a message. you can choose the following options, by pressing the Options soft key. Delete: allows you to delete the message. Cut Number: allows you to extract a number from the message text, so that you can call the number or save it in the Phonebook. Send: allows you to send the message that you have received or saved. You can:
send the message save and send the message save but not send the message Edit And Send: allows you to edit a message for sending. Note: The available options may vary, depending on the message status; New, Old, Not Sent or Sent. To delete all of the messages, you can select Delete All (Menu 2.2.4). 62 Write Messages MMeessssaaggeess Menu 2.3 In this menu, you can write a text message and send it to multiple destinations. or 1. Press the key to select one of the five setting groups preset via the Setup menu
(Menu 2.5) and press the Select soft key. For details on the setting groups, see page 65. 2. Enter your message and press the OK soft key. For further information about how to enter characters, see page 41. 3. Select one of the following options by pressing the or key and press the Select soft key. Send Only: After transmission, the message will be cleared. Save and Send: allows you to save a copy of the message. When you read the message in your Outbox, Sent displays to indicate the message status. Save Only: allows you to save the message so that it can be sent later. You do not take the next step. When you read the message in your Outbox, Not sent displays. 4. Select an Empty cell for the destination, phone number or e-mail address, by pressing the key and press the Edit soft key. or 5. Enter the desired destination and press the OK soft key. 63 MMeessssaaggeess Note: The Names soft key, which is visible when you do not enter anything, allows you to search for a number in your Phonebook. 6. If you want to send the message to multiple destinations, repeat steps 4 and 5 as needed. To delete an entered destination, select it from the list and press the Delete soft key. 7. When you finish entering the destinations, press the key to send the message. Preset Message List Menu 2.4 Using this menu, you can preset up to five messages that you send most frequently to retrieve when writing a new message. Scroll through the list by pressing the key. When the required message number highlights, press the Options soft key. or The following options are available:
Edit: allows you to write a new message or edit the selected preset message. Note: For further information about how to enter characters, refer to page 41. Send Message: allows you to retrieve the selected message for sending. Once you have completed the message, you can send, save and send or simply save it. Delete: allows you to delete the selected message. 64 Setup MMeessssaaggeess Menu 2.5 In this menu, you can set up default information for the SMS feature. A setting group is a collection of settings required to send messages. Five setting groups are available. Select a setting group by pressing the key, and press the key or the Select soft key. Then, set up the options for the group. or The available setup options are:
Setting Name: allows you to give a name to the setting group currently being defined. Callback Number: allows you to set the phone number to which the recipient of your SMS message may send you a reply message via your message center, if the service is provided by the network. Manual Ack: allows you to activate or deactivate the manual acknowledgement function. When this function is activated, the recipient can send you an answer to your message by one touch of a number key. Delivery Ack: allows you to activate or deactivate the delivery acknowledgement function. When this function is activated, the network informs you whether or not your message has been read by the recipient. Privacy: allows you to set the restriction feature. When this option is set to Restricted, the recipient must enter her/his password to see the message from you. If you do not want to use the feature, select Not Restricted. 65 MMeessssaaggeess MMeessssaaggeess Edit Text*: allows you to edit text from the message. Rename: allows you to change the name of the picture. For further details about entering characters, see page 41. Note: Each picture message is made of several text messages. Therefore, sending one picture message may cost more than sending one text message.
*: unavailable when the selected picture is one of the preset pictures. Urgency: allows you to set the urgency status of messages. Bulk, Normal, Urgent and Very Urgent are available. Type: allows you to set the type of messages. The available types are Text and E-mail. Picture Message Menu 2.6 In this menu, you can send an SMS message containing pictures. Your phone has 10 preset pictures that can be replaced with pictures received from the Internet or other phones. Select a picture from the list and press the View soft key. When the picture is displayed, press the Options soft key. The following options are available:
Delete: deletes the picture. The preset picture will be restored. Text Reply*: allows you to send a text reply to the sender. Call Back*: allows you to call the sender back. Cut Number*: allows you to extract a number from the message, so that you can call the number or save it in the Phonebook. Send: allows you to send a picture message using the selected picture. Note that the recipient's phone must support the Picture Messaging feature. 66 67 MMeessssaaggeess MMeessssaaggeess Receiving Pictures, Ring Tones, or Caller Line Icons When you receive a message from the Internet or other phones, you will hear an alert beep and a text notification will appear on the display; Picture Message, Ring Tone or Caller Line Icon. You have the option of saving these items in the phones memory or discarding them. Picture Message You may send a received picture as an SMS message to another phone that supports this feature. You may save up to 10 pictures. When you receive a picture message:
To view the picture save the picture discard the picture use the saved pictures 68 Then press the View soft key. press the Options soft key. select Save Picture and press the Select soft key. select a preset picture to be replaced and press the Select soft key. press the Options soft key. select Discard and press the Select soft key. go to page 66. Ring Tone You may set a received tone as your phones ring tone. You may save up to 5 tones. When you receive a ring tone message:
To listen to the ring tone Then press the Options soft key. select Playback and press the Select soft key. press the Stop soft key to stop playing back. save the ring tone press the Options soft key. select Save and press the Select soft key. select a location and press the Select soft key. select the Yes or No soft key when the phone asks if you want to set the ring tone to the received tone. press the Options soft key. select Discard and press the Select soft key. discard the message use the saved ring tones go to page 71. 69 MMeessssaaggeess Caller Line Icon You may use the icons as a graphic for a caller group. You can save up to five icons. When the memory for icons is full, you are allowed to select an old one to replace. Note that the eight default icons cannot be replaced by the downloaded ones. When you receive a caller line icon message:
To view the icon save the icon Then press the View soft key. press the Options soft key. select Save and press the Select soft key. if necessary, select an icon to be replaced, and press the Select soft key. discard the icon press the Options soft key. select Discard and press the Select soft key. use the saved icons go to page 38. Tones You can use the Tones feature to customize various sound settings, such as the:
ringer tone or melody, volume and type sounds made when you press a key, make an error or receive a message Ring Tone Menu 3.1 This option allows you to select the desired ringer tone. You can choose from various preset tones. Also, you can use the tones received from other sources, such as the Internet or other phones. Each time you select a tone, it sounds for a few seconds. Ring Volume Menu 3.2 This option allows you to adjust the volume level of the ringer. or Press the the level. You can also use the left side of the phone. The greater the number of bars you see, the greater the volume is. key to increase or decrease key on the or 70 71 TToonneess Alert Type Menu 3.3 This option allows you to indicate how you are to be informed of any incoming calls. The following options are available:
Light Only: only the backlight of the display comes on; the phone neither rings nor vibrates. Melody: the phone rings using the ringer tone selected via the Ring Tone menu option (Menu 3.1). Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. Keypad Tone Menu 3.4 In this menu, you can change the settings for the sound that the phone makes when you press any key. The following setting options are available:
Volume: you can adjust the volume level of the keypad tone. Key Sound: you can select the sound type of the keypad tone. Select one from Pure Sound, Piano, Person and Beep. TToonneess DTMF Length: the tone length setting enables you to select Short or Long DTMF (dual-tone multi-
frequency) tones. DTMF tones are what your phone transmits to access to teleservices, such as a bank account. The system used by the bank or other service determines if you need short or long DTMF. If the service is digital which most are these days, short DTMF tones will almost always work. Message Tone Menu 3.5 This option allows you to select how the phone informs you that a new message is received. The following options are available:
Light Only: only the backlight of the display comes on; the phone neither rings nor vibrates. Vibration: the phone vibrates but does not ring. Single Beep: the phone beeps once. SMS Tone: the phone uses a tone. 72 73 TToonneess Error Tone Menu 3.6 Function Sound TToonneess Menu 3.9 In this menu, you can select ???????
This option allows you to select how the phone informs you that you have made a mistake. The following options are available:
OFF: the phone does not beep. ON: the phone beeps to indicate an invalid entry. Minute Minder Menu 3.7 This option allows you to specify whether the phone must beep every minute during an outgoing call to keep you informed of the length of your call. The following options are available:
OFF: the phone does not beep. ON: the phone beeps every minute. Connect Tone Menu 3.8 You can set your phone to beep when your call is connected to the remote phone or the remote phone is ringing depending on your network. The following options are available:
OFF: the phone does not beep. ON: the phone beeps when your call is connected. 74 75 Settings Many different features of your phone can be customized to suit your preferences via the Settings menu. Infrared Activate Menu 4.1 This feature allows you to send or receive data/fax through the infrared port. To use an infrared connection, you must:
configure and activate an IrDA-compliant infrared port on your PC activate the infrared feature on the phone; the IrDA icon (
display
) appears on the top line of the align the IrDA port on the phone with the IrDA port on your computer IrDA port 15 IrDA port The connection is ready for data transmission. If there is no communication between your phone and the IrDA-compliant device within 30 seconds of activating the feature, it is automatically deactivated. SSeettttiinnggss Note: For the best performance, it is highly recommended that you use a data link cable. You can purchase one from your local Samsung dealer. LCD Display Control Menu 4.2 Using this menu option, you can set various settings for the display. Screen Mode You can select the screen to be displayed in idle mode. The following options are available:
Normal: the display shows the service providers name and the current time and date. Calendar: the display shows the calendar of the current month. Image Display: the display shows the image selected in the Select Image option. Clock: the display shows the clock. Select Image This option allows you to select the image to be displayed when you set the Screen mode option to Image Display. 76 77 SSeettttiinnggss SSeettttiinnggss SSeettttiinnggss Color Theme You can change the color setting of the display components, such as text, soft key display area or the menu names and icons. Five different color settings are available. Back Light You can select whether or not the phone uses the backlight. A marginal increase in standby/talk time can be achieved by turning the backlight off. The following options are available:
OFF: the backlight is not used. Short: the backlight comes on when you press a key or receive a call and switches off 10 seconds after the last key is pressed. Long: the backlight comes on when you press a key or receive a call and switches off 20 seconds after the last key is pressed. Auto Light Using this feature, you can specify the time period for which the backlight is to be used. This feature helps conserve your battery power. The following options are available:
Disable: the backlight is used according to the setting in the Back Light menu option (Menu 4.2.4);
see page 83. Enable: the backlight is used only during the specified period of time. Set the time when the phone will turn on the light and turn it off, using the appropriate number keys. Contrast or This option allows you to adjust the contrast of the LCD screen to make it brighter or darker, by pressing the key on the left side of the phone. Each time you slide the key, you can see the LCD screen changing according to the current value. key. You can also use the or Auto Redial Menu 4.3 With the Auto Redial function, the phone makes up to ten attempts to redial a phone number after an unsuccessful call. Note: The interval between two call attempts varies depending on your network. The following options are available:
OFF: the number is not redialed. ON: the number is redialed automatically. 78 79 SSeettttiinnggss Active Folder Menu 4.4 Reset Settings SSeettttiinnggss Menu 4.6 This option allows you to set the phone to start voice dialing by opening the folder. The following options are available:
Off: the phone does not use this feature. Voice Dial: the phone use this feature. You need to use the Act menu option in the Voice Dial menu (Menu 10.1) to activate the voice dialing. For further details about the voice dialing feature, see page xx. Language Menu 4.5 In this menu, you can change the language for the display or enable/disable the voice prompt. The following options are available:
Text Language: you can select a language to be used to display text from English, Espaol, and Portugus. Voice Language: enable or disable the voice prompt when using the voice functions. When this option is disabled, Input Mode: you can change the default text input mode. You can easily reset the menu settings to its factory default status. Enter the 4-digit security code and press the OK soft key. The phone immediately resets all settings to default status. Note: The security code is preset to 0000. To change this code, refer to page 92. Calling Card Menu 4.7 When you use a calling card for long distance calls, you must send the service code and the card number to the calling card service system. Using this menu, you can save these calling card information to send them automatically when you make calling card calls. You can store up to 5 calling cards. Enter the 4-digit security code and press the OK soft key to access the Calling Card menu. Saving Calling Card Information 1. Scroll to a calling card number by pressing the key and press the Select soft key. or 2. If you want to set the card name, press the Select soft key. Enter the name as needed. For further details about entering characters, see page 41. 80 81 SSeettttiinnggss SSeettttiinnggss 3. When you finish entering name, press the OK soft key. The name is saved. 4. Press the key to move to the Card Number menu, and press the Select soft key. 5. Enter the card number (and/or PIN if required) as listed on the back of the calling card. To enter a pause, P before the second number, press and hold the be sent only by pressing the make a call with the calling card. key. The number after P will key when you Note: The order of the numbers which you must enter may vary depending on the dialing sequence your card uses. 6. When you finish entering the number, press the OK soft key. 7. To return to idle mode, press the key. Selecting a Calling Card You can set a default card to use for making a calling card calls. The number stored in the selected card will be sent when you make calling card calls. 1. Scroll to the desired calling card by pressing the key and press the Select soft key. or 2. Select Set Default by pressing the key, and press the Select soft key. or 3. The display shows the number saved for the calling card. If you are satisfied, press the Set soft key. 82 4. To return to idle mode, press the key. Making Calls Using the Calling Card Note: The following procedure may not apply to all calling cards. Please look at the back of your calling card or contact your phone company for instructions. 1. Make a call to the calling card service system. 2. When you are connected, press the Options soft key and select Callcard Service by pressing the or key. 3. Press the OK soft key. 4. When you hear the prompting tone from the service system, press the card numbers. key to transmit the 5. Dial the number of the desired remote phone. 83 SSeettttiinnggss Short Cut Key Menu 4.8 The navigation keys can also be used as shortcut keys. In idle mode, they allows you to access specific menu options directly. Using this menu, you can change the shourcut assignments on each key. 1. Select the key to be used as a shortcut key by or key and press the pressing the Select soft key:
Key up Key down Key left Key right 2. Select the menu option to be assigned to the key by pressing the Select soft key. or key and press the Note: To deactivate a shortcut key, select the None option. Organizer The Organizer feature enables you to:
view the calendar and organize your schedule define a list of things to do set the current date and time set the alarm so that the phone rings at a specific time, to remind you of an appointment, for example use the phone as a calculator Calendar Menu 5.1 With the Calendar feature, you can:
consult the calendar. write memos to keep track of your schedule and trigger an alarm, if necessary. Consulting the Calendar When you select the Calendar menu option (Menu 5.1), the calendar is displayed. The following options are available when you press the Options soft key. Search all: displays all memos set, regardless of the day and starting with the oldest. To scroll through the memos, press the key. or Delete all: allows you to delete all memos. You are asked to confirm your selection. Go to date: allows you to jump to a specific date. 84 85 OOrrggaanniizzeerr Writing a Memo To write or edit a memo on a specific date:
1. Select the required date on the calendar, by pressing the navigation keys. Note: Press the month or the month. key to skip to the previous key to skip to the next 2. Press the Select soft key. An empty memo screen is displayed to allow you to enter your memo. 3. Enter your memo and then press the OK soft key. Note: For further details about how to enter characters, refer to page 41. You are asked if you wish to set an alarm. 4. If you want an alarm to ring on the chosen day, press the Yes soft key. Otherwise, press the No soft key. 5. If you pressed Yes, set the time for the alarm and press the OK soft key. The color of the date changes to green to indicate that a memo exists. Editing a Memo If you select a day for which a memo already exists, you can press the Edit soft key to edit the memo displayed. Note: For further details about how to enter characters, refer to page 41. OOrrggaanniizzeerr Once you have finished editing the memo, press the OK soft key. The following options are available when you press the Options soft key:
Alarm: allows you to set the alarm to ring on the chosen day. Erase: allows you to delete the memo. Copy to: allows you to copy the memo to another date. Move to: allows you to change the date and time of the memo. To Do List Menu 5.2 This feature allows you to:
enter up a list of tasks to be done assign a priority and deadline to each task sort the tasks by priority and status mark Creating the To Do List To create the To Do List:
1. Press the New soft key. 2. Enter the first task. Note: For further details about how to enter characters, see page 41. 3. Press the OK soft key. 4. Select high, normal or low priority by pressing the or key and press the Select soft key. 86 87 OOrrggaanniizzeerr OOrrggaanniizzeerr 5. Enter your deadline. If you do not want to define the deadline, press the Skip soft key. 6. Press the OK soft key to save the task. Editing the To Do List If tasks are already defined in the To Do List when you select the To Do List menu option (Menu 5.2), the current contents are displayed with the associated a status mark and priority (
for Normal and for for High, Low). Then highlight the task. To view the details for a specific task press the View soft key. change the status highlight the task. of a specific task press the key to mark the task as completed as of the current date and time. or highlight the task. press the Options soft key. select the Mark option. select the appropriate status. create a new task press the Options soft key. select the New option. enter the text, priority and deadline for the task. edit an existing task highlight the task. press the Options soft key. select the Edit option. change the text, priority and deadline for the task. 88 To... sort the existing tasks by priority or status copy a task delete a task delete all tasks Then... press the Options soft key. select the Sort option. select the sort criterion (High, Low, Done, Undo). highlight the task. press the Options soft key. select the Copy option. change the text, priority and deadline for the task as 1needed. highlight the task. press the Options soft key. select the Delete option. press the Options soft key. select the Delete all option. confirm the deletion by pressing the OK soft key. Time & Date Menu 5.3 This option allows you to change the current time and date displayed. You can also check the current time for Greenwich Mean Time (GMT) and 21 major cities around the world. The following options are available:
Set Time: allows you to enter the current time. You can choose the time format via the Format menu option (Menu 5.3.4). 89 OOrrggaanniizzeerr Note: Before setting the time, you must specify your time zone, via the World Time menu option
(Menu 5.3.3). Set Date: allows you to enter the day, month and year. You can change the date format via the Format menu option (Menu 5.3.4). World Time: allows you to check the current time for Greenwich Mean Time (GMT) and 21 major cities around the world, by using the The screen shows the:
city name. current date and time. time difference between the selected city and and keys. your city if you have set the local time (see below for further details) or GMT (by default). To select your time zone:
1. Select the city corresponding to your time zone by pressing the The local date and time are displayed. or key. 2. Press the Set soft key. Format: allows you to change the time and date formats. Time format: 24 Hours 12 Hours Date format: YYYY/MM/DD (year/month/day) DD/MM/YYYY (day/month/year) MM/DD/YYYY (month/day/year) Alarm OOrrggaanniizzeerr Menu 5.4 You can set the alarm to ring at a specific time. Note: To meet FAA safety guidelines, the alarm does not work when the phone is off. To set an alarm:
1. Select one of Alarm 1 ~ 3 and press the Select soft key. 2. Select the alarm frequency option and press the Select soft key. The following frequency options are available:
Once Alarm: the alarm rings only once and is then deactivated. Daily Alarm: the alarm rings every day at the same time. Monday -> Friday: the alarm rings at the same time on Monday to Friday. Monday -> Saturday: the alarm rings at the same time on Monday to Saturday. Weekly Alarm: the alarm rings every week on the same day and at the same time. Remove Alarm: deactivates the alarm. 3. Enter the required time and press the OK soft key. 4. If you selected Weekly Alarm in step 2, select a day of the week and the OK soft key. 90 91 OOrrggaanniizzeerr To stop the alarm when it rings, open the folder and press the Exit soft key. You can select a melody for the alarm sets using the Alarm Tones menu option (Menu 5.4.4). Calculator Menu 5.5 Using this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication and division. 1. Enter the first number using the numeric keys. 2. Press the right soft key until the required arithmetic symbol appears; + (add), - (subtract),
* (multiply), / (divide). 3. Enter the second number. 4. Repeat steps 2 to 3 as many times as required. Notes:
To erase any mistakes or clear the display, press the C key. To include a decimal point or a bracket, press the left soft key until the required symbol is displayed. 5. To get the result, press the key. 6. To end the calculation, press the key. Security The Security feature enables you to restrict the use of your phone to the:
people of your choice types of calls of your choice Change Lock Code Menu 6.1 The lock code is a password for locking or unlocking the phone. The lock code is preset to 0000 at the factory. This menu allows you to change your current lock code. Before you can specify a new lock code, you must enter the current code. Then, enter a new code and enter it again to confirm. Change Security Code Menu 6.2 The security code is used for restriction of the use of your phone. The security code is preset to 0000 at the factory. This menu allows you to change your current security code. Before you can specify a new security code, you must enter the current code. Then, enter a new code and enter it again to confirm. 92 93 SSeeccuurriittyy SSeeccuurriittyy Call Restriction Menu 6.3 The call restriction feature allows you to restrict your calls. Call restriction can be set up in the following ways:
restrict all outgoing call: calls cannot be made. restrict all Incoming call: calls cannot be received. restrict outgoing call: calls to the phone numbers which you have specified cannot be made. You can set up to 10 phone numbers. To restrict the all outgoing or all incoming calls:
1. Select restrict all outgoing call or restrict all key, incoming call by pressing the and then press the Select soft key. or 2. Select Enable to turn the feature on and press the Select soft key. If you want to set the restriction off, select Disable. 3. Enter your security code and press the OK soft key. To set the phone numbers to be restricted:
3. Select Edit, then press the OK soft key. If a number has already been saved, this option allows you to edit the number. If you want to erase a saved number, select Erase. When a confirming message displays, press the Yes soft key. 4. Enter the phone number and press the OK soft key. The phone number is saved and now you cannot make a call to that number. SOS Call List Menu 6.4 Your phone provides emergency numbers for SOS calls programmed by the service provider. Three numbers can be manually dialed at any time even though the phone is locked or all outgoing calls are restricted. To make an SOS call when the phone is locked, press the Select soft key, select the desired number saved in the SOS call list. Press the Call soft key to make a call. 1. Select restrict outgoing call by pressing the or key and press the Select soft key. 2. Enter your security code and press the OK soft key. 94 95 Network Services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you wish. Call Diverting Menu 7.1 Note: For using the Call Diverting service, you must set the service code for it. Depending on the Set Service Code setting, this menu may not appear. For details, see page 99. This network service enables incoming calls to be rerouted to the number that you specify. Example: You may wish to divert your business calls to a colleague while you are on holiday. Call diverting can be set up in the following ways:
1. Select the type of the call diverting options by pressing the Select soft key. or key, and press the Divert Always: all calls are diverted. Busy: calls are diverted if you are already making another call. No Reply: calls are diverted if you do not answer the phone. Unreachable: calls are diverted if you are not in an area covered by your service provider. Cancel All : all call diverting options are canceled. 96 NNeettwwoorrkk SSeerrvviicceess 2. When Activate is highlighted, press the Select soft key. 3. Enter the number to which the calls are to be diverted, and press the OK soft key. Note: The Names soft key which is visible when you do not enter anything allows you to search for a number in your Phonebook. The phone sends your setting to the network and the networks acknowledgement is displayed. You can deactivate each call diverting setting by selecting the Cancel option. Call Waiting Menu 7.2 This network service enables you to be informed when someone is trying to reach you during another call. Note: For using the Call Waiting service, you must set the service code for it. Depending on the Set Service Code setting, this menu may not appear. For details, see page 99. The following options are available:
Activate: activates the Call Waiting feature. You can answer an incoming call while you have a call in progress. See page 50 for answering a waiting call. Cancel: deactivates the Call Waiting feature. 97 NNeettwwoorrkk SSeerrvviicceess NNeettwwoorrkk SSeerrvviicceess Network Selection Menu 7.3 Voice Privacy Menu 7.4 The Network Selection feature enables you to indicate whether the network to used when roaming outside your home area is selected automatically or manually. Note: You can select a network other than your home network only if it has a valid roaming agreement with your home network. The following options are available:
Automatic: your phone automatically searches for a network available to you and selects the appropriate one. Every time you switch your phone on, this menu resets to Automatic. Manual: your phone searches for available networks, then displays them. Press the key until the preferred network highlights and then press the OK soft key. or New Search: your phone begins a new search for new Private and Residential systems. When finding the best new system, the phone displays it. Then you can confirm by pressing the Select soft key, or start another search by pressing the Next soft key. 98 Used only in digital networks, Voice Privacy encrypts the voice channel so that people cannot eavesdrop on your call conversation. If you turn this feature on and voice privacy becomes inactive for any reason your phone displays Voice privacy not active and beeps. The following options are available:
Activate: turns this feature on. Your calls will be secured. Deactivate: turns this feature off. Note: This feature may not be available in all areas. Contact your service provider for details and availability. NAM Selection Menu 7.5 The service provider programs your phone with the phone number and system information when your phone is first activated. This is called a Number Assignment Module (NAM). For example, your phone can be activated in up to 4 different service areas each giving your phone a different phone number or account. Only one number can be active at a time. When you select a phone number, you are also selecting which system to be used as your home system. The first phone number displayed with this menu is the currently selected number. 99 NNeettwwoorrkk SSeerrvviicceess NNeettwwoorrkk SSeerrvviicceess Notes:
It may not be necessary to have 4 NAMs for your phone if your service provider has service or roaming agreements for each area where you wish to use your phone. Contact your service provider for details. You need at least one active number to make a call. You cannot change from one NAM to another during a call. Set Service Code Menu 7.6 For using the network services, such as the Call Diverting and Call Waiting, you must set the service codes supplied by your service provider with this menu. For more information about the service code, contact your service provider. Call Diverting: allows you to set the codes for using each of the options (Divert Always, Busy, No Reply, Unreachable and Cancel All) available in the Call Diverting menu. Call Waiting: allows you to set the codes for using each of the options (Activate and Cancel ) available in the Call Waiting menu. After selecting the desired option, enter the service code and press the OK soft key. The service code is saved and the option will be selectable when you access the appropriate menu. Public System Selection Menu 7.7 Note: This menu may not be shown depending on your service provider. When your system leaves its home system, it is roaming. Roaming is a feature which is only relevant in areas where there are usually at least two service providers which are referred to as A and B and have valid roaming agreements. When the phone is roaming, it can automatically search for home-type systems (same type as your home system) or non-
home type systems (opposite type as your home system). Also, your service provider has programmed a list of preferred systems into your phone. The system selection feature of your phone enables you to choose how your phone will roam. The following options are available:
Home Type: When service is not available in your home system, it will search for a home type, preferred first. Non HomeType: When service is not available in your home system, it will search for a non-home type, preferred first. AnySystem: When service is not available in your home system, the phone searches for a preferred system of either type, then a home type system, then a non-home type system. Home Only: The phone uses its home system only, that is, it will not roam. 100 101 Games You can enjoy two games with your phone;
AirShooting and SpaceWar. Scroll to the desired game using the the keys and press the Select soft key. and The options for the game is displayed. To select an option, press the corresponding number key. The following options are available:
Newgame: starts a new game. HighScore: shows the highest scores list. Up to 5 gamers can be ranked. Not all games have this option. Key Info.: provides you the help screen, showing the key operation in the game. Continue: allows you to continue the game you last played. Voice Functions In this menu, you can use the phones voice features such as:
Voice Dial Voice Memo Voice Dial MENU 10-1 When your phone is in digital mode, you can call up to 20 stored entries by speaking the associated name into the microphone. Using the Voice dialing feature requires that you first program the phone to recognize the name of the person you are calling. Tips for Recording a Name Avoid recording similar names phonetically. If you record a similar name to one already in the memory, the phone requests another name. Speak clearly and naturally. The person who will use the phone should record the name. The phone does not recognize the name if the voice is different. Avoid too long or too short a name. Names with two to 5 syllables are recommended. If this feature does not work properly, erase the name, and try again with another name. Practice several times to obtain the best result. You can record up to 20 names. If you try to record more than 20, the phone announces Out of space to store voice tags!. 102 103 VVooiiccee FFuunnccttiioonnss VVooiiccee FFuunnccttiioonnss The following options are available:
Record: you can record name tags and allocate them to numbers for voice dialling. 1. Say the name you want to use for voice dialling after you hear a voice prompt. The phone stores the name as a first sample, and then prompts you to say the name again. 2. Respond to the prompt by repeating the name. The phone saves the name as a second sample and then requests the phone number and name. 3. Enter a number and press the OK soft key. 4. Enter a name and press the Save soft key. For further details about entering characters, see page xx. Act: you can activates voice dialling. 1. You hear a voice guide and Say Name appears on the display. 2. Say the voice tag clearly. The phone automatically dials the number of a recognized voice tag. If no match for the voice tag is found or recognized, the phone may ask you to try again. Note: If you set the Active Folder menu option (Menu 4.4) to Voice Dial, you can activates voice dialling simply by opening the folder. Delete one: allows you to delete a voice dial entry. Play all: plays back all of the voice dial entries. Delete all: deletes all of the voice dial entries. Voice Memo MENU 10-2 Using this menu option, you can use the phone as a recorder. Notes:
Your phone can record up to 10 memos, and each memo can be up to 1 minute in length of time. Closing the folder while recording cancels your recording. If you have an incoming call while recording a voice memo or the call is disconnected while recording phone conversation, the memo recorded up to that point is saved with the stamp of the current date and time. When you are out of the service area(No Service is displayed) or in analog mode, a voice memo is not correctly recorded. It is recommended that you use this feature in digital mode in the service area. The following options are available:
Record: you can record a memo. Note: Recording voice conversations is illegal in some countries. Make sure the other party has stated its consent to being recorded. 1. The message Recording displays, along with the timer. 2. Record a memo by speaking to the microphone. 3. To stop recording, press the Stop soft key. You are asked to enter the title for the recorded message. 104 105 VVooiiccee FFuunnccttiioonnss 4. Enter a title using the number keypad, then press the Save soft key to save the recording. For details about entering characters, see page 41. If you do not enter a title, the memo is saved with a label of Untitled. Replay & Delete: you can play back a recorded message and delete it, if you want. 1. When the display shows the title of the first memo, press the memo you want to play back. or key to display the 2. Press the Play soft key to play back the recorded message currently displayed. 3. When you finish reviewing, press the Stop soft key. 4. If you want to delete the memo, press the Delete soft key. 5. When the phone confirms your selection, press the Yes soft key. If you do not want to delete the memo, press the No soft key. 6. Repeat steps 1 through 5 as needed. 7. When you finish, press the key to return to idle mode. Edit Title: you can change the title of the selected memo. Solving Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call. No service, Network failure or Not done is displayed The network connection was lost. You may be in a weak reception area, such as in a tunnel or surrounded by buildings. Move and try again. You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details. You have entered a number but it was not dialed Have you pressed the Are you accessing the right cellular network?
You may have chosen to restrict outgoing calls. key?
Your correspondent cannot reach you Is your phone switched on (the for more than one second)?
key pressed Are you accessing the right cellular network?
You may have chosen to restrict incoming calls. You may be in a weak signal area. More and try again. 106 107 VVooiiccee FFuunnccttiioonnss Your correspondent cannot hear you speaking Have you switched off the microphone (mute)?
Are you holding the phone close enough to your mouth? The microphone is located at the bottom center of the phone. The phone starts beeping and **Warning**
Low Battery flashes on the display The battery power is weak. Replace the battery and recharge it. The audio quality of the call is poor Check the signal strength indicator on the display
); the number of bars indicates the signal
strength from strong (
) to weak (
). Try moving the phone slightly or moving closer to a window if you are in a building. No number is dialed when you recall a Phonebook entry Check that the number has been stored correctly, by using the Phonebook Search feature. Re-store the number, if necessary. If the above guidelines do not help you to solve the problem, take a note of:
the model and serial numbers of your phone. your warranty details. a clear description of the problem. Then contact your local dealer or Samsung after-sales service. 108 Health and Safety Information Exposure to Radio Frequency (RF) Signals Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-1992 National Council on Radiation Protection and Measurement (NCRP). Report 86 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.*
* In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg(w/kg) averaged over on gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 109 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safety exposure. For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only Samsung-
approved accessories. When carrying the phone while it is on, use the specific Samsung belt-clip that has been tested for compliance. Use of non-Samsung-approved accessories may violate FCC RF exposure guidelines and should be avoided. For additional information concerning exposure to radio frequency signals, see the following websites:
Federal Communications Commission (FCC) RF Safety program (select Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters):
http://www.fcc.gov/oet/rfsafety Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com World Health Organization (WHO) International Commission on Non-ionizing Radiation Protection
(select Qs & As):
http://www.who.int/emf United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk U.S.Food and Drug Administration (FDA) Center for Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
110 111 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 C (32 F). Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire.. Precautions When Using Batteries Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first. 112 113 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips. 1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your phonebook takes your attention away from your primary responsibility, driving safely. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you. 114 115 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn 10. Call roadside assistance or a special non-
emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-
emergency wireless number. Operating Environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its users guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers:
should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on should not carry the phone in a breast pocket should use the ear opposite the pacemaker to minimize potential interference If you have any reason to suspect that interference is taking place, switch off your phone immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. 116 117 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch off your phone in any facility where posted notices require you to do so. Potentially Explosive Atmospheres Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. 118 119 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call:
1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location. Emergency numbers vary by location. 3. Press the <SEND> key. If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident;
do not cut off the call until given permission to do so. Other Important Safety Information Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch off your phone before boarding an aircraft. The use of wireless phones in aircraft may be dangerous to the operation of the aircraft, and is illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both. 120 121 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-
water solution. Do not paint the phone. Paint can clog the devices moving parts and prevent proper operation. Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices. If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of small childrens. Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. Do not touch the phone with wet hands while it is charging. Doing so may give you an electric shock or damage the phone. Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phones electronic circuit boards. Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. 122 123 Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features on your mobile phone, here are a few definitions. Antenna A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas. Call Diverting Ability to reroute calls to another mobile or fixed line. Call Holding Ability to put one call on standby while answering or making another call; you can then switch between the two calls, as required. Calling Line Identification Services (Caller-ID) Services allowing subscribers to view or block the telephone numbers of callers. Call Waiting Ability to inform users that they have an incoming call when engaged on another call. GGlloossssaarryy Conference Calling Ability to establish a conference call involving up to two additional parties. Hands-Free A feature that permits a driver to use a wireless phone without lifting or holding the handset - an important safety feature for automobiles, tractors and most other motorized vehicles. LCD (Liquid Crystal Display) Commonly used to refer to the screen display on the wireless phone. Phone Password Lock code used to unlock the phone when you have selected the option to lock it automatically each time it switches on, and security code used to restrict the use of your phone. Roaming Use of your phone when you are outside your home area (when travelling for example). SMS (Short Message Service) Network service for sending and receiving messages to and from another subscriber without having to speak to the correspondent. The message created or received can be displayed, received, edited or sent. 124 125 GGlloossssaarryy Soft Keys Keys marked which:
varies according to the function that you are on the phone, the purpose of currently using is indicated on the bottom line of the display just above the corresponding key TDMA Time division multiple access (TDMA) is a digital transmission technology that allows a number of users to access a single radio-frequency (RF) channel without interference by allocating unique time slots to each user within each channel. The TDMA digital transmission scheme multiplexes three signals over a single channel. The current TDMA standard for cellular divides a single channel into six time slots, with each signal using two slots, providing a 3 to 1 gain in capacity over advanced mobile-phone service
(AMPS). Each caller is assigned a specific time slot for transmission. Voice Mail A computerized answering service that answers a call, plays a greeting and records a message. Index b e u p d a t e d i x e d . i s f l l i n d e x w i t h e m a n u a l T h e w h e n A Accessories 7 Adjusting volume 23 Alarm (5.4) 90 Alert Type (3.3) 72 Answering a call 24 a second call 50 Answer mode (4.5) 79 Auto Redial (4.4) 79 B Backlight 13; 77 Batteries charging 17 installing 15 low battery indicator 18 precautions 112 removing 16 C Calculator (5.5) 91 Calendar (5.1) 84 Caller group 38 ID 24 Calling Card (4.9) 80 Calls answering 24 a second call 50 conference 51 diverting (7.1) 95 ending 21 holding 49 incoming (1.2) 58 making 21 missed 25; 58 outgoing (1.3) 69 redialing 22 automatically 79 restriction (6.3) 93 SOS (6.4) 94 time (1.4) 59 via the phonebook 22 waiting (7.3) 50; 96 Care 124 Changing lock code (6.1) 92 security code (6.2) 92 Characters entering 41 Charging batteries 17 Composer Melody (3.9) 75 Conference calls 51 Connect to Voice Mail (2.1) 60 tone (3.8) 74 Contrast 78 Correcting numbers 21 Creating To do list 86 D Date format (5.3.4) 89 setting (5.3.2) 89 Deleting memos 86 messages 62 missed calls 26 phonebook numbers 36 tasks 88 voice memo 105 Display 11 backlight 77 contrast 78 external 13 icons 12 setting the language (4.6) 80 Diverting calls (7.1) 95 126 127 IInnddeexx IInnddeexx E Earpiece Editing adjusting the volume 23 memos 85 messages 62 missed calls 26 phonebook numbers 35 To Do List 87 Voice memo title 106 Erasing memos 86 messages 62 missed calls 26 phonebook numbers 36 tasks 88 voice memo 105 Error Tone (3.6) 73 External display 13 F Functions selecting 29 G Games (8) 101 Greeting Message (4.1) 77 Groups caller 38 H Holding calls 49 I Icons description 12 ID, caller 24 Identifying a caller 24 Incoming Calls (1.2) 58 K Key tones adjusting the volume 23 muting 46 sending 46 Keys description 9 location 8 navigation 29 L Language (4.6) 80 Last number redialing 22 Length of calls 59; 74 Letters entering 41 Light Control (4.2) backlight 13; 77 service 14; 78 Listening voice mail 60 voice memo 105 Lock code 92 Locking phone 20 Low battery indicator 18 M Maintenance 122 Melody Composer (3.9) 75 Memory status 40 Memos calendar 84 voice 103 Menus by scrolling 52 by shortcut 53 list 54 Message Tone (3.5) 73 Messages greeting (4.1) 77 picture (2.6) 66 preset (2.4) 64 reading (2.2) 61 setup (2.5) 65 voice mail (2.1) 60 writing (2.3) 63 M (continued) Minute Minder (3.7) 74 Missed calls (1.1) 25; 58 Mute key tones 46 N NAM, selecting (7.5) 98 Names entering 41 options 34 searching 37 storing in the phonebook 32 Network Selection (7.3) 97 Network Services (7) 95 Number correcting 21 editing missed call 25; 58 phonebook 35 erasing phonebook 36 moving phonebook 36 own 40 redialing 22 automatically 79 searching 37 storing in the phonebook 32 O Options selecting 29 Organizer (5) 84 Outgoing Calls (1.3) 59 Own Number 40 P Phone locking 20 switching on/off 19 Phonebook 32 editing numbers 35 erasing numbers 36 moving numbers 36 options 38 searching 37 storing numbers/names 32 Picture Messages (2.6) 66 Preset Message List (2.4) 64 Private call 49; 98 Problem solving 107 R Read Messages (2.2) 61 Recording, voice memo 103 Redialing automatically 79 last number 22 Replaying, voice memo 105 Reset Settings (4.7) 80 Restriction, call 93 Ring tone (3.2) 71 type 72 volume (3.1) 71 Roaming 97; 100 128 129 IInnddeexx S Safety batteries 112 information 109 quick guide 5 Schedule 84 Searching Phonebook 37;
Security code 92 Selecting functions/options 47 28 Sending key tones 46 messages 64 Service code (7.6) 99 Service light 14; 78 Setting alarm (5.4) 90 date (5.3.2) 89 display language 80 time (5.3.1) 88 Settings resetting (4.7) 80 Shortcut (4.9) 83 Silent mode 27 SMS 48, 60 Soft keys, using 28 Solving problems 107 Speed Dialing 33 Switching on/off phone 19 T Text input modes 41 changing 42 Text messages reading 61 sending 63 Time calls (1.4) 59 format (5.3.4) 89 setting (5.3.1) 88 world (5.3.3) 89 To Do List (5.2) 86 Tone connect (3.8) 74 error (3.6) 73 length (3.4) 72 message (3.5) 73 ring (3.2) 71 Tones (3) 71 Travel charger 17 T9 mode 43 V Vibration 72 Voice mail (2.1) 60 Voice memo pad 103 Voice Privacy (7.4) 98 Voice Server Number
(2.1.2) 61 Volume adjusting 23 ring (3.1) 71 5 2 3 A
H T S e n o h p e e T l e l i b o M A M D T d r a C e c n e r e f e R i k c u Q W Waiting call 50; 96 World Time (5.3.3) 89 Write Messages (2.3) 63 Writing memos 85
. y e k t f o s u n e M e h t s s e r P e h t
. r e b m u n e h t n i y e K
. s s e r p y l f e i r B
. s s e r P l l a C a e k a M l l a C a d n E t f o s w e i V e h t s s e r p d n a r e d o f l e h t n e p O
. y e k r o y b s l l a c d e s s i m e h t g n i s s e r p e h t h g u o r h t l l o r c S
, l l a c e h t n r u t e r o T
. s s e r p i d e s s M w e V i i d e s s m e r e w t h g i r s l l a C y e h t r e t f a
. l d o h d n a s s e r P f f O
n O h c t i w S f o h c a e r u o y l i t n u s u n e m y b u n e m d e r i u q e r e h t
. r o g n i s s e r p t s i l e h t h g u o r h t l l o r c S t f o s t c e l e S e h t s s e r P
. y e k s s e c c A u n e M n o i t c n u F
. r o y b d e t c e e s s i l e n o e h t g n i s s e r p d e r i u q e r e h t l i t n u s n o i t p o f o t s i l e h t h g u o r h t l l o r c S t f o s t c e l e S e h t s s e r P
. y e k
) y a l p s i d e h t n o e n i l m o t t o b
t i e v o b a t x e t e h t y b d e t a c i d n i n o i t c n u f e h t s m r o f r e p
) d n a
s y e k t f o s o w t e h t f o h c a E 130 131 l A e r t T y p e C h o o s e t h e l V o u m e j A d u s t t h e C a l l O p e n A n s w e r a o r P r e s s
. t h e l f o d e r m e n u o p t i o n
3 3
. l S e e c t t h e A l e r t T y p e s i d e o f t h e p h o n e
. P r e s s o r o n t h e l e f t S t o r e i n t h e N u m b e r s P h o n e b o o k k e y t o c o n f i r m
. P r e s s t h e S e l e c t s o f t M e l o d y
. S e e c t l a n o p t i o n
V i b r a t i o n a n d V i b r a
L i g h t O n l y
, M e l o d y
, i n t h e N u m b e r P h o n e b o o k S e a r c h f o r a
. T o s c r o l l t h r o u g h t h e n a m e s
, p r e s s o r P r e s s t h e S e a r c h s o f t k e y
. o f t h e n a m e
. E n t e r t h e f i r s t f e w l e t t e r s P r e s s t h e O K s o f t k e y
. P r e s s t h e N a m e s s o f t k e y
. l o c a t i o n
. I f n e c e s s a r y
, c h a n g e t h e t h e O K s o f t k e y
. E n t e r t h e n a m e
, a n d p r e s s t h e S e l e c t s o f t k e y
. S e e c t l a l a b e l a n d p r e s s K e y i n t h e n u m b e r
. P r e s s t h e S a v e s o f t k e y
. T o m a k e a c a l l
, p r e s s
. 132
1 | Users Manual per CRN 7160 | Users Manual | 444.90 KiB | / December 02 2003 |
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safety exposure. should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure For additional information concerning exposure to radio frequency signals, see the following websites:
Federal Communications Commission (FCC) RF Safety program (select Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters):
http://www.fcc.gov/oet/rfsafety Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com World Health Organization (WHO) International Commission on Non-ionizing Radiation Protection
(select Qs & As):
http://www.who.int/emf United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk U.S.Food and Drug Administration (FDA) Center for Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
This device was tested for typical body-worn operations with requirements, and should be avoided. the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-
clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user's body and the back 110 111
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-02-12 | 824.04 ~ 848.97 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-02-12
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
STHA325
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** C********
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R**** O******
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Dual-Mode Cellular Phone (AMPS/TDMA) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is ERP. SAR compliance for body- worn operating configuration is based on a separation distance of 1.5 cm between the back of the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are AMPS Head: 1.19 W/kg; Body-worn: 1.00 W/kg, TDMA Head: 0.477 W/kg; Body-worn: 0.384 W/kg | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R******** O******
|
||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | BC | 824.04 | 848.97 | 0.547 | 2.5 ppm | 40K0F8W | |||||||||||||||||||||||||||||||||
1 | 2 | 22H | BC | 824.04 | 848.97 | 0.547 | 2.5 ppm | 40K0F1D | |||||||||||||||||||||||||||||||||
1 | 3 | 22.901(d) | 824.04 | 848.97 | 0.522 | 2.5 ppm | 30K0DXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC