all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual 1 | Users Manual | 2.69 MiB | ||||
1 |
|
Users Manual 2 | Users Manual | 2.08 MiB | ||||
1 | Operational Description | |||||||
1 | Cover Letter(s) | |||||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual 1 | Users Manual | 2.69 MiB |
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010COV.fm]
010COV.book Page 1 Saturday, March 15, 2003 4:29 PM 3-083-945-11 (1) US DVD Player/
Video Cassette Recorder Operating Instructions For customers in the USA If you have any questions about your Sony DVD-VCR, you may call Sony Customer Information Services Company at 1-800-VHS-SONY (847-7669). For all other Sony product questions, please call Sony Customer Information Services Company at 1-800-222-SONY (7669). Or write to: Sony Customer Information Services Company 12451 Gateway Boulevard Ft. Myers, FL 33913 For Customers in Canada If this product is not working properly, please call 1-877-602-2008 for Peace of Mind Warranty Replacement service. For other product related questions please contact our Customer Information Service Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6 SLV-D300P 2003 Sony Corporation filename[010COV.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010WAR.fm]
010COV.book Page 2 Saturday, March 15, 2003 4:29 PM Welcome!
Thank you for purchasing this Sony DVD Player/Video Cassette Recorder. Before operating this player, please read this manual thoroughly and retain it for future reference. General Precautions
Operate the unit only on 120 V AC, 60 Hz.
This unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord. If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit and cause damage to the video head and tape. When you first install the unit, or when you move it from a cold to a warm location, wait for about three hours before operating the unit.
Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.
Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers.
Do not place heavy objects on the unit. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. For customers in the U.S.A Owners Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SLV-D300P Serial No.______________ CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2 WARNING filename[010WAR.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010WAR.fm]
010COV.book Page 3 Saturday, March 15, 2003 4:29 PM Important Safeguards For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them. Use Power sources This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization This set is equipped with a polarized ac power cord plug (a plug having one blade wider than the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow the instructions below:
For the set with a polarized ac power cord plug:
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in. For the set with a three-wire grounding type ac plug:
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Object and Liquid Entry Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards. Cleaning Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. Installation Water and Moisture Do not use power-line operated sets near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Power-Cord Protection Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance. Accessories Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart stand tripod, bracket, or table recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. S3125A Ventilation The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.
Never cover the slots and openings with a cloth or other materials.
Never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface. continued Important Safeguards 3 filename[010WAR.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010WAR.fm]
010COV.book Page 4 Saturday, March 15, 2003 4:29 PM
Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. Antennas Outdoor antenna grounding If an outdoor antenna or cable system is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Antenna Grounding According to the National Electrical Code Ground Clamp Electric Service Equipment Antenna Lead in Wire Antenna Discharge unit
(NEC Section 810-20) Grounding Conductors
(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System
(NEC Art 250 Part H) NEC-NATIONAL ELECTRICAL CODE Lightning For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges. Service Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:
When the power cord or plug is damaged or frayed. If liquid has been spilled or objects have fallen into the set. If the set has been exposed to rain or water. If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.
When the set exhibits a distinct change in performance - this indicates a need for service. Servicing Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition. 4 Important Safeguards filename[010WAR.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010WAR.fm]
010COV.book Page 5 Saturday, March 15, 2003 4:29 PM DVD Precautions On safety
Caution The use of optical instruments with this product will increase eye hazard.
To prevent fire or sh ock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. On operation If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.
When you move the player, take out any discs. If you dont, the disc may be damaged. On adjusting volume when playing DVD Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played. On cleaning discs Do not use a commercially available cleaning disc. It may cause a malfunction. IMPORTANT NOTICE Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Projection televisions are especially susceptible to this. DVD Precautions 5 filename[010WAR.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010COVTOC.fm]
010COV.book Page 6 Saturday, March 15, 2003 4:29 PM Table of contents 2 WARNING 2 Welcome!
2 General Precautions 3 Important Safeguards 5 DVD Precautions 8 About this manual 8 This player can play the following discs 9 Notes about discs Getting Started 10 Step 1 : Unpacking 11 Step 2 : Setting up the remote commander 14 Step 3 : Basic hookups 21 Step 4 : Selecting a language 22 Step 5 : Setting the clock 26 Step 6 : Presetting channels Basic Operations 30 Playing discs 33 Guide to the on-screen display 35 Playing a tape 38 Recording TV programs 41 Recording TV programs using the timer 44 Checking/changing/canceling timer settings Advanced Hookups 46 A/V Receiver hookup 48 S-Video/Component Video hookup DVD Settings and Adjustements 50 Audio Setup 53 Screen Setup 56 Setting the display or sound track language 58 Parental Control (limiting playback by children) DVD Additional Operations 61 Using the DVDs menu 62 Zooming into a scene 63 Changing the angles 64 Displaying the subtitle 65 Various play mode functions
(Program play, Shuffle play, Repeat play) 69 Using bookmarks 71 Changing the sound 72 Virtual surround setting 74 Playing an MP3 audio track 78 Playing JPEG image files 81 Playing VIDEO CDs with MENU ON/OFF Functions 6 Table of contents filename[010COVTOC.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010COVTOC.fm]
010COV.book Page 7 Saturday, March 15, 2003 4:29 PM VCR Additional Operations 83 Quick Timer Recording 84 Recording stereo and bilingual programs 85 Searching using various functions 87 Adjusting the picture (tracking) 88 Changing menu options 89 Editing with another VCR Additional Information 91 General setup information 94 Troubleshooting 99 Glossary 101 Specifications 103 Index to parts and controls 108 DVD Audio/Subtitle Language 109 Index Caution For use of the VCR Television programs, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmission and/or program owner. For use of the DVD player This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents, other intellectual property rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Table of contents 7 filename[010COVTOC.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010PRE.fm]
010COV.book Page 8 Saturday, March 15, 2003 4:29 PM About this manual
The meaning of the icons used in this manual is described below:
Icon Meaning Functions available for DVD VIDEOs and DVD-RWs/
DVD-Rs in video mode or DVD+RWs/DVD+Rs Functions available for VIDEO CDs, Super VCDs or CD-Rs/
CD-RWs in video CD format or Super VCD format Functions available for DATA CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio tracks or JPEG files) Functions available for music CDs or CD-Rs/CD-RWs in music CD format Functions available for VHS VIDEOs
* MP3 (MPEG 1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio data. This player can play the following discs Format of discs DVD VIDEO VIDEO CD Music CD The DVD VIDEO logo is a trademark. Region code Your player has a region code printed on the back of the unit and only will play DVD VIDEO discs
(playback only) labeled with identical region codes. This system is used to protect copyrights. DVDs labeled ALL will also play on this player. If you try to play any other DVD, the message Playback prohibited by area limitations. will appear on the TV screen. Depending on the DVD, no region code indication may be labeled even though playing the DVD is prohibited by area restrictions. Region code X SLVDXXXX 0-000-000-00 00V 00Hz NO. 00W Example of discs that the player cannot play The player cannot play the following discs:
All CD-ROMs (including PHOTO CDs)/CD-
Rs/CD-RWs other than those recorded in the following formats:
music CD format video CD format MP3 or JPEG format that conforms to ISO9660* Level 1/Level 2, or its extended format, Joliet
Data part of CD-Extras
DVD-RWs in VR mode
DVD-ROMs
DVD Audio discs
HD layer on Super Audio CDs
* A logical format of files and folders on CD-ROMs, defined by ISO (International Standard Organization). Also, the player cannot play the following discs:
A DVD with a different region code.
A disc recorded in a color system other than NTSC, such as PAL or SECAM (this player conforms to the NTSC color system).
A disc that has a non-standard shape (e.g., card, heart).
A disc with paper or stickers on it.
A disc that has the adhesive of cellophane tape or a sticker still left on it. 8 About this manual filename[010PRE.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010PRE.fm]
010COV.book Page 9 Saturday, March 15, 2003 4:29 PM Note Some DVD-RWs/DVD-Rs, DVD+RWs/DVD+Rs or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device. Furthermore, the disc will not play if it has not been correctly finalized. For more information, see the operating instructions for the recording device. Note that discs created in the Packet Write format cannot be played. Note on playback operations of DVDs and VIDEO CDs Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Notes about discs
To keep the disc clean, handle the disc by its edge. Do not touch the surface.
Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.
After playing, store the disc in its case.
Clean the disc with a cleaning cloth. Wipe the disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs. Notes about discs 9 filename[010PRE.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 10 Saturday, March 15, 2003 4:29 PM Getting Started Step 1 : Unpacking Check that you have received the following items with the DVD-VCR:
Remote commander
Size AA (R6) batteries
75-ohm coaxial cable w ith F-type connectors
Audio/video cord
(pinplug 3 y pinplug 3) 10 Unpacking filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 11 Saturday, March 15, 2003 4:29 PM Step 2 : Setting up the remote commander G e t t i n g S t a r t e d Remote sensor Inserting the batteries Insert two size AA (R6) batteries by matching the + and on the batteries to the diagram inside the battery compartment. Insert the negative () end first, then push in and down until the positive (+) end clicks into position. Using the remote commander You can use this remote commander to operate this DVD-
VCR and a Sony TV. Buttons on the remote commander marked with an orange dot () can be used to operate your Sony TV. If the TV does not have the symbol near the remote sensor, this remote commander will not operate the TV. TV /
DVDVIDEO SELECT VIDEO SELECT DVD To operate Set TV / DVDVIDEO to the DVD player DVDVIDEO, then press SELECT DVD and point at the remote sensor at the DVD-VCR the VCR DVDVIDEO, then press SELECT VIDEO and point at the remote sensor at the DVD-VCR your TV TV and point at the remote sensor at your TV Notes
With normal use, the batteries shou ld last about three to six months. If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.
Do not use a new battery with an old one.
Do not use different types of batteries.
Do not leave the remote commander in an extremely hot or humid place.
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. continued Setting up the remote commander 11 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 12 Saturday, March 15, 2003 4:29 PM Controlling other TVs with the remote commander The remote commander is preprogramed to control non-Sony TVs. If your TV is listed in the following table, set the appropriate manufacturers code number. 1 Set TV / DVDVIDEO at the top of the remote commander to TV. 2 Hold down ?/1, and enter your TVs code number using the number buttons. Then release ?/1. Now you can use the ?/1, VOL +/, CH +/, MUTING*, TV/VIDEO and ENTER*
buttons to control your TV. You can also use the buttons marked with a dot () to control a Sony TV. To control the DVD-VCR, reset TV / DVDVIDEO to DVDVIDEO.
* for Sony TV only Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. TV brand Code number Sony Akai AOC Centurion Coronado Curtis-Mathes Daytron Emerson Fisher 01 04 04 12 03 12 12 03, 04, 14 11 General Electric 06, 10 Gold Star Hitachi J.C.Penney JVC KMC Magnavox Marantz 03, 04, 17 02, 03 04, 12 09 03 03, 08, 12 04, 13 MGA/Mitsubishi 04, 12, 13, 17 NEC 04, 12 TV brand Panasonic Philco Philips Pioneer Portland Quasar Radio Shack RCA Sampo Sanyo Scott Sears Sharp Sylvania Teknika Toshiba Wards Yorx Zenith Code number 06, 19 03, 04 08 16 03 06, 18 05, 14 04, 10 12 11 12 07, 10, 11 03, 05, 18 08, 12 03, 08, 14 07 03, 04, 12 12 15 12 Setting up the remote commander filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 13 Saturday, March 15, 2003 4:29 PM Notes If you enter a new code number, the code nu mber previously entered will be erased. If the TV uses a different remote control sy stem from the one programed to work with the DVD-VCR, you cannot control your TV with the remote commander.
When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries. G e t t i n g S t a r t e d Setting up the remote commander 13 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 14 Saturday, March 15, 2003 4:29 PM Step 3 : Basic hookups Before you get started
Be sure to disconnect the AC power co rd of each component before connecting.
Turn off the power to all equipment.
Do not connect the AC power cords until al l of the connections are completed. If you connect the AC power cord before the connections are completed, you may not be able to use the Plug and Play function.
Be sure you make connections firmly. Loose connections may cause picture distortion.
If your TV does not match any of the ex amples provided, see your nearest Sony dealer or qualified technician. Selecting the best hookup option There are many ways in which your DVD-VCR can be hooked up. To hook up your DVD-VCR so that it works best for you, first scan through the table below. Then use the accompanying diagrams and procedures on the following pages to set up your DVD-VCR. If your TV has audio/video inputs, refer to page 15 for audio/video (A/V) hookup. Then follow one of the hookups below. If your TV does not have A/V inputs, go directly to one of the hookups below. If you have Use Refer to Antenna only, no cable TV No cable box or cable box with only a few scrambled channels Cable box with many scrambled channels Hookup 1
(Plug and Play) Hookup 2
(Plug and Play) Pages 16 and 17 Pages 18 and 19 Hookup 3 Page 20 After you have completed the connections, follow the instructions for setup. After you have completed the setup, you are ready to use your DVD-VCR. Procedures differ depending on the hookup you used. Caution Connections between the DVD-VCRs VHF/UHF connector and the antenna terminals of the TV receiver should be made only as shown in the following instructions. Failure to do so may result in operation that violates the regulations of the Federal Communications Commission regarding the use and operation of RF devices. Never connect the output of the DVD-VCR to an antenna or make simultaneous (parallel) antenna and DVD-VCR connections at the antenna terminals of your receiver. Note to CATV system installer (in USA) This reminder is provided to call the CATV system installers attention to Article 820- 40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 14 Basic hookups filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 15 Saturday, March 15, 2003 4:29 PM Audio/video (A/V) hookup If your TV has audio/video (A/V) input jacks, you will get better picture and sound if you hook up your DVD-VCR using these connections. If your TV does not have A/V inputs, see the following pages for antenna or cable hookups. Note that Advanced Hookups (page 46) explains additional hookup methods that will optimize the picture and sound for a true hometheater experience. If you are not planning to use your DVD-VCR to record programs, you only need to make the connections shown on this page. If you want to record regular or cable TV programs, complete these connections first, and then go to the following pages for antenna or cable hookups. A Use this hookup if your TV has stereo jacks G e t t i n g S t a r t e d DVD-VCR Stereo receiver TV Audio/video cord (supplied) Audio cord (not supplied) B Use this hookup if your TV does not have stereo jacks DVD-VCR Stereo receiver TV Video cord (not supplied) Audio cord (not supplied) Notes
To play a tape/disc in stereo, you must use the A/V connection. If you do not have a stereo receiver, conn ect the white LINE OUT/AUDIO L jack to the AUDIO IN jack on your TV. continued Basic hookups 15 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 16 Saturday, March 15, 2003 4:29 PM Hookup 1 (Plug and Play) Antenna hookup Make the following connections if you are using an antenna (if you do not have cable TV). A Use this hookup if you are using:
VHF/UHF antenna (you get channe ls 213 and channels 14 and higher)
UHF-only antenna (you get channels 14 and higher)
Separate VHF and UHF antennas Rear of TV VHF/UHF DVD-VCR Match the type of connector on your TV: A, B, or C. or or A VHF B UHF VHF C UHF B Use this hookup if you are using a VHF-only antenna (you get channels 213 only) DVD-VCR or or Rear of TV VHF/UHF Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. A VHF B UHF VHF C UHF If you cannot connect your antenna cable to the DVD-VCR directly If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external antenna connector (not supplied) so you can connect the cable to the RF IN connector. If you have separate cables for VHF and UHF antennas, you should use a U/V band mixer (not supplied) (page 93). 16 Basic hookups filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 17 Saturday, March 15, 2003 4:29 PM Hookup 1 : DVD-VCR setup Plug the DVD-VCR into an AC outlet. The DVD-VCR automatically presets the DVD-VCRs clock and TV channels when the DVD-VCR is plugged into the AC outlet. G e t t i n g S t a r t e d AC power cord to AC outlet The DVD-VCR starts presetting the clock and channels. When Auto preset is completed, the current time appears in the display window. You have now completed DVD-VCR setup. To change the on-screen display language to French or Spanish, see Step 4 : Selecting a language on page 21. The clock is set using a time signal provided by some TV channels. If the clock is incorrect, or --:-- appears in the display window, see Using Manual Clock Set on page 24. To add or disable channels manually, see Presetting/disabling channels manually on page 28. Notes If you connect the AC power cord before the an tenna connections are completed, the channels may be incorrectly set. If this happens, see Step 6 : Presetting channels on page 26.
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time after you purchase the DVD-VCR.
Auto preset can be performed by pressing x STOP on the unit continuously for 5 seconds or more with the DVD-VCR power turned off. continued Basic hookups 17 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 18 Saturday, March 15, 2003 4:29 PM Hookup 2 (Plug and Play) You have no cable box, or a cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels. What you can do with this hookup
Record any unscrambled channel by selecting the channel on the VCR What you cannot do
Record scrambled channels that require a cable box Wall DVD-VCR Connect this cable directly to your TV if you do not have a cable box. Cable box or or Rear of TV VHF/UHF A VHF UHF VHF UHF B C Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. 18 Basic hookups filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 19 Saturday, March 15, 2003 4:29 PM Hookup 2 : DVD-VCR setup Plug the DVD-VCR into an AC outlet. The DVD-VCR automatically presets the DVD-VCRs clock and TV channels when the DVD-VCR is plugged into the AC outlet. G e t t i n g S t a r t e d AC power cord to AC outlet The DVD-VCR starts presetting the clock and channels. When Auto preset is completed, the current time appears in the display window. You have now completed DVD-VCR setup. To change the on-screen display language to French or Spanish, see Step 4 : Selecting a language on page 21. The clock is set using a time signal provided by some TV channels. If the clock is incorrect, or --:-- appears in the display window, see Using Manual Clock Set on page 24. To add or disable channels manually, see Presetting/disabling channels manually on page 28. Notes If you connect the AC power cord before the an tenna connections are completed, the channels may be incorrectly set. If this happens, see Step 6 : Presetting channels on page 26.
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time after you purchase the DVD-VCR.
Auto preset can be performed by pressing x STOP on the unit continuously for 5 seconds or more with the DVD-VCR power turned off. continued Basic hookups 19 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 20 Saturday, March 15, 2003 4:29 PM Hookup 3 Connecting a cable box with many scrambled channels Recommended use Use this hookup if your cable system scrambles all or most channels. What you can do with this hookup
Record any channel by select ing the channel on the cable box What you cannot do
Record with the cable box turned off
Record one channel while watching another channel Wall Cable box Rear of TV VHF/UHF Match the type of connector on your TV: A, B, or C. For connector types B and C, no UHF connection is required. or or A B C VHF UHF VHF UHF DVD-VCR After you have completed hookup After you have completed hookup, plug the DVD-VCR into an AC outlet and see Step 4 : Selecting a language on page 21. AC power cord to AC outlet 20 Basic hookups filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[\\Win-78\got78\2003combo\3083945111\3083945111SLVD300PUC\010GET.fm]
010GET.fm Page 21 Thursday, March 20, 2003 1:34 PM Step 4 : Selecting a language You can change the on-screen display language. Before you start Turn on the DVD-VCR and your TV.
To control the DVD-VCR, set TV /
DVDVIDEO to DVDVIDEO on the remote (page 11).
Set the RF Output Channel to 3CH or 4CH in OPTION SETUP menu
(page 91). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input.
If the DVD player is in play mode, you cannot display the SETUP MENU. Stop the DVD playback. G e t t i n g S t a r t e d SET UP V/v/B/b ENTER O RETURN 1 2 3 4 Press SET UP. The SETUP MENU appears.
(Language/
Press V/v/B/b to select Idioma/Langue), then press ENTER. The LANGUAGE/IDIOMA/LANGUE menu appears. Press V/v to select the desired language, English, Spanish or French, then press ENTER. Press O RETURN to exit the menu. Selecting a language 21 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 22 Saturday, March 15, 2003 4:29 PM SET UP V/v/B/b ENTER O RETURN Step 5 : Setting the clock Using the Auto Clock Set feature Some TV and cable channels transmit time signals with their broadcasts. Your DVD-
VCR can pick up this time signal to automatically set the clock. The Auto Clock Set feature works only if a channel in your area is broadcasting a time signal. If broadcasters in your area are not yet sending time signals, set the time manually (page 24). Before you start
Turn on the DVD-VCR and your TV. When using a cable box, turn it on.
To control the DVD-VCR, set TV /
DVDVIDEO to DVDVIDEO on the remote (page 11).
Set the RF Output Channel to 3CH or 4CH in OPTION SETUP menu
(page 91). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input.
If the DVD player is in play mode, you cannot display the SETUP MENU. Stop the DVD playback. 1 2 Press SET UP. The SETUP MENU appears. Press V/v/B/b to select Adjust), then press ENTER. The CLOCK SET/ADJUST menu appears.
(Clock Set/
22 Setting the clock filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 23 Saturday, March 15, 2003 4:29 PM 3 4 5 6 G e t t i n g S t a r t e d Press V/v to select Auto, then press ENTER. Press V/v to select the item you want. Then press B/b to make the setting.
For Clock data CH Leave the setting to Auto to have the DVD-VCR automatically search for a channel that carries a time signal. Press B/b to select a channel that carries a time signal. Use this option if you know of a channel that carries a time signal. Most PBS member stations broadcast a time signal. For the fastest response, select your local PBS station.
For Time zone Select the time zone of your area, or select Auto to have the DVD-VCR automatically set your time zone. The options are:
Auto y Atl. (Atlantic) y East (Eastern) y Cen. (Central) y Mtn. (Mountain) y Pac. (Pacific) y Alas (Alaska) y Haw. (Hawaii) y Auto
For Daylight saving Select Yes or No (standard time), or Auto to have the DVD-VCR automatically set the daylight saving time. Press O RETURN repeatedly to exit the menu. To activate the Auto Clock Set function, turn off the DVD-VCR. continued Setting the clock 23 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 24 Saturday, March 15, 2003 4:29 PM Notes
The clock cannot be set automatically if you do not receive a channel that carries a time signal in your area. If so, set the clock manually (page 24). If there are only a few channels in your area that carry time signals, setting the clock automatically may take up to about 20 minutes. If nothing happens even after you wait about 20 minutes, set the clock manually (page 24). If you made Hookup 3, make sure you leave the cable box on.
To record TV programs using the tim er, you must set the clock accurately.
The clock display appears when VIDEO mode is selected with no tape inserted or when the DVD-VCR is turned off. Using Manual Clock Set Before you start
Turn on the DVD-VCR and your TV.
To control the DVD-VCR, set TV /
DVDVIDEO to DVDVIDEO on the remote (page 11).
Set the RF Output Channel to 3CH or 4CH in OPTION SETUP menu
(page 91). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input.
If the DVD player is in play mode, you cannot display the SETUP MENU. Stop the DVD playback. SET UP V/v/B/b ENTER O RETURN 1 2 Press SET UP. The SETUP MENU appears. Press V/v/B/b to select Adjust), then press ENTER. The CLOCK SET/ADJUST menu appears.
(Clock Set/
24 Setting the clock filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 25 Saturday, March 15, 2003 4:29 PM 3 4 5 6 7 Press V/v to select Manual, then press ENTER. Press V/v to set the hour. Press b to select the minutes and press V/v to set the minutes. G e t t i n g S t a r t e d Set the month, day, and year in the same way as the minutes. The day of the week is set automatically. Press O RETURN to save the clock setting. Notes
To record TV programs using the tim er, you must set the clock accurately.
The clock display appears when VIDEO mode is selected with no tape inserted or when the DVD-VCR is turned off. Setting the clock 25 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 26 Saturday, March 15, 2003 4:29 PM Step 6 : Presetting channels SET UP V/v/B/b ENTER This DVD-VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using automatic presetting methods. Then, if there are any unwanted channels, disable them manually. If you have already decided which channels you wish to preset, set them directly using manual presetting methods (page 28). Presetting all receivable channels automatically Before you start
Turn on the DVD-VCR and your TV. When using a cable box, turn it on.
To control the DVD-VCR, set TV /
DVDVIDEO to DVDVIDEO on the remote (page 11).
Set the RF Output Channel to 3CH or 4CH in OPTION SETUP menu
(page 91). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input.
If the DVD player is in play mode, you cannot display the SETUP MENU. Stop the DVD playback. 1 2 Press SET UP. The SETUP MENU appears. Press V/v/B/b to select Setup), then press ENTER. The CHANNEL SETUP menu appears.
(Channel 26 Presetting channels filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 27 Saturday, March 15, 2003 4:29 PM 3 4 5 Press V/v to select Ant/Cable.
To preset cable TV channels:
Press B/b to select Cable TV.
To preset VHF and UHF channels:
Press B/b to select Antenna. Press V/v to select Auto channel memory, then press ENTER. All receivable channels are preset in numerical sequence. When no more receivable channels can be found, presetting stops and the picture from the lowest numbered channel is displayed on the TV screen. G e t t i n g S t a r t e d continued Presetting channels 27 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 28 Saturday, March 15, 2003 4:29 PM Presetting/disabling channels manually Before you start
Turn on the DVD-VCR and your TV. When using a cable box, turn it on.
To control the DVD-VCR, set TV /
DVDVIDEO to DVDVIDEO on the remote (page 11).
Set the RF Output Channel to 3CH or 4CH in OPTION SETUP menu
(page 91). If your TV is connected to the DVD-VCR using A/V connections, set the TV to video input.
If the DVD player is in play mode, you cannot display the SETUP MENU. Stop the DVD playback. CH +/
Number buttons SET UP V/v/B/b ENTER 1 2 3 Press SET UP. The SETUP MENU appears. Press V/v/B/b to select Setup) then press ENTER. The CHANNEL SETUP menu appears.
(Channel Press V/v to select Channel add/delete, then press ENTER. 28 Presetting channels filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010GET.fm]
010COV.book Page 29 Saturday, March 15, 2003 4:29 PM 4 5 To preset/disable a channel:
Channel to be preset 1 Press CH +/ or number buttons to enter the channel number. 2 Press B/b to select ADD (in memory) or DELETE (deleted). 3 Press ENTER. Channel to be disabled G e t t i n g S t a r t e d Press O RETURN repeatedly to exit the menu. Presetting channels 29 filename[010GET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 30 Saturday, March 15, 2003 4:29 PM Basic Operations Playing discs Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. Before you start ...
Turn on the DVD-VCR and your TV.
Switch the input selector on your TV so that the signal from the player appears on the TV screen.
Set TV / DVDVIDEO to DVDVIDEO, then press SELECT DVD to control the DVD player (page 11).
?/1 Z m/M C
./ >
X PAUSE x STOP H PLAY 1 Press Z to open the disc tray and place a disc on the disc tray. with the playback side facing down 30 Playing discs filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 31 Saturday, March 15, 2003 4:29 PM 2 Press H PLAY. The disc tray closes and the DVD player starts playback. The display window shows the playback time*. Depending on the disc, a menu may appear on the TV screen. For DVDs, see page 61. For VIDEO CDs, see page 81.
* appears when no disc is loaded. Hour Minute Second Additional tasks To Stop play Pause play*
Resume play after pause Press x STOP X PAUSE H PLAY Advance by frame in pause mode C Go to the next chapter, track, or scene in continuous play mode
> on the remote Go back to the previous chapter, track, or scene in continuous play mode
. on the remote Stop play and remove the disc Z i B a s c O p e r a t i o n s
* If you pause the DVD player for more than 5 minutes, the DVD player will automatically stop. To Resume playback for the current disc (Resume Play) The DVD player remembers the point where you stopped the disc even if the DVD player enters standby mode by pressing ?/1. 1 While playing a disc, press x STOP to stop playback. 2 Press H PLAY. The DVD player starts playback from the point where you stopped the disc in Step 1. To locate a point quickly by playing a disc in fast forward or fast reverse in continuous play mode (DVD, VIDEO CD and CD only) Press m or M. For DVD or Video CD, each time you press the button, the playback speed changes as follows. 2 t 4 t 8 t 16 t 32 t 128 Release the button at the desired speed. For CD, the searching speed does not change ( 8 play). When you find the point you want, press H PLAY. continued Playing discs 31 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 32 Saturday, March 15, 2003 4:29 PM To watch slow motion in continuous play mode (DVD and VIDEO CD only) Press X PAUSE, then press M SLOW y. With each press, the playback speed changes cyclically as follows. To resume normal playback, press H PLAY. Notes
You can change the screen type using the S CREEN SETUP menu. (See Screen Setup on page 53)
Do not perform VIDEO playback while playing back a disc.
You cannot change th e MP3 playback speed.
VIDEO CD fast forward/reverse and slow motion play cannot be paused. Notes on playing DTS* sound tracks on a CD
When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the DVD player are connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1-channel decoder system must be connected to the digital jack of the DVD player.
Set the sound to STEREO using the AUDIO button when you play DTS sound tracks on a CD (page 71).
Do not play DTS sound tracks without firs t connecting the DVD player to an audio component having a built-in DTS decoder. The DVD player outputs the DTS signal via the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if DTS is set to Off in AUDIO SETUP menu (page 51), and may affect your ears or cause your speakers to be damaged. Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack.
When you play a DVD with DTS sound tracks , set DTS to On in AUDIO SETUP menu (page 51). If you connect the player to audio equipment without a DTS decoder, do not set DTS to On in AUDIO SETUP menu (page 51). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.
* DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. 32 Playing discs filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 33 Saturday, March 15, 2003 4:29 PM Guide to the on-screen display You can check disc information during playback. The displayed contents differ according to the type of disc being played. V/v/B/b ENTER O RETURN DISPLAY Press DISPLAY. The following information appears; type of disc, current title/track, chapter, counter position, voice language, subtitle language and surround setting. Refer to DVD Audio/Subtitle Language on page 108 for the abbreviation of the language. Type of disc Current title/track number Current chapter number Counter position Voice language Subtitle language Surround setting You can playback the desired title/track, chapter or counter position using this menu. To playback the desired title/track or chapter 1 Press V/v to select the desired item. 2 Press B/b to change the item. 3 Press ENTER to start playback. 4 Press DISPLAY or O RETURN to turn off the menu. The title/track or chapter icon will appear on the DVD playback screen followed by the current title/track or chapter number and the counter positon. i B a s c O p e r a t i o n s continued Guide to the on-screen display 33 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 34 Saturday, March 15, 2003 4:29 PM To playback from the desired counter position 1 Press V/v to select the counter position icon. 2 Enter the desired position using the number buttons. 3 Press ENTER to start playback. 4 Press DISPLAY or O RETURN to turn off the menu. Tip
You can change the co unter position information (playing time or remaining time) using B/b (DVD, VIDEO CD and CD only). Notes
The display may not change as operated depending on the disc.
The display window continue indicating the playing time even when the counter position information on the on-screen display is being changed. 34 Guide to the on-screen display filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 35 Saturday, March 15, 2003 4:29 PM Playing a tape Before you start ...
Turn on the DVD-VCR and your TV.
Switch the input sele ctor on your TV so that the signal from the player appears on the TV screen.
Set TV / DVDVIDEO to DVDVIDEO, then press SELECT VIDEO to control the VCR (page 11).
?/1 Z TRACKING +/
CLEAR REPLAY MSLOWy m
./ >
C SKIP X PAUSE x STOP H PLAY DISPLAY i B a s c O p e r a t i o n s 1 Insert a tape. The VCR starts playing automatically if you insert a tape with its safety tab removed. continued Playing a tape 35 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 36 Saturday, March 15, 2003 4:29 PM 2 Press H PLAY. The display window shows the playback time. When the tape reaches the end, it will rewind automatically. Hour Minute Second Additional tasks To Stop play Pause play*
Press x STOP X PAUSE Resume play after pause X PAUSE or H PLAY Fast-forward the tape Rewind the tape Eject the tape M during stop m during stop Z
* If you pause the VCR for more than 5 minutes, the DVD player will automatically resume play. To play a recently watched scene You can immediately rewind and playback the scene you want to watch again. During playback, press REPLAY. The VCR rewinds the tape about 10 seconds in the SP mode (about 15 seconds in the EP mode) on the counter for each press of the button, and restarts playback. To skip playback You can skip a scene that you do not want to watch (such as a commercial) and restart playback. During playback, press C SKIP. The VCR skips the tape 30 seconds on the counter each time the button is pressed (up to four times) and playback is resumed. To turn off the power while rewinding (Rewind Shut Off) Press ?/1 while the tape is rewinding. The power will turn off but the tape will keep rewinding until it reaches the end. To play/search at various speeds Playback options Operation View the picture during fast-
forward or rewind During fast-forward, hold down M. During rewind, hold down m. Play at high speed
During playback, briefly press M or m. The tape continues to play at 5 times normal speed.
During playback, hold down M or m. The tape continues to play at 5 times normal speed. When you release the button, normal playback resumes. 36 Playing a tape filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 37 Saturday, March 15, 2003 4:29 PM Playback options Operation Play in slow motion During pause, press MSLOW y. Play frame by frame During pause, press C SKIP. Play at various speeds
(Shuttle play) During playback, press .or > SHUTTLE. You can change the playback speed as follows. 7 y 5 y 3 y STILL y SLOW y PLAY y 2 y 3 y 5 y 7 To resume normal playback Press H PLAY. To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to 0:00:00. To search for the counter 0:00:00 point automatically, see To search for the counter 0:00:00 point on page 86. To display the counter on the TV screen, press DISPLAY. Tip
Adjust the picture using the TRACKING +/ buttons if:
Streaks appear while playing in slow motion. The picture shakes during pause. Notes
Tapes recorded in the LP mode on other V CRs can be played back on this VCR but the picture quality cannot be guaranteed.
The counter resets to 0:00:00 whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
When 10 hours have passed, the counter in the display window returns to 0:00:00 and the count starts over again.
The sound is muted during playback at various speeds.
The picture may show noise when playing at high speed in reverse.
While playing a tape, you can display the SETUP MENU but the remote commanders function switches to DVD automatically. Press O RETURN repeatedly to exit the menu.
When playback does not start even if you insert a tape with its safety tab removed, set Auto Play to On in the VIDEO FUNCTION SETUP menu (page 88).
Stop disc playback while playing back a video.
The VCR can also play S-VHS tapes. The V CR will automatically identify the type of tape inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in the VCR, the enhanced resolution will not be visible on screen; there may also be picture distortion while playing the S-VHS tape in slow motion or while utilizing other special playback modes. The VCR will not record in S-VHS mode on an S-VHS tape. i B a s c O p e r a t i o n s Playing a tape 37 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 38 Saturday, March 15, 2003 4:29 PM Recording TV programs Before you start ...
Turn on the DVD-VCR and your TV.
Switch the input selector on your TV so that the signal from the player appears on the TV screen.
Set TV / DVDVIDEO to DVDVIDEO, then press SELECT VIDEO to control the VCR (page 11).
To record from a cable box, turn it on.
Make sure the tape is longer than the total recording time.
?/1 Z CH +/
SP/EP TV/VIDEO INPUT SELECT z REC x STOP H PLAY ENTER DISPLAY 1 2 Insert a tape with its safety tab in place. Press CH +/ to select the channel or line input video source you want to record. 38 Recording TV programs filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 39 Saturday, March 15, 2003 9:03 PM 3 4 Press SP/EP to select the tape speed, SP or EP. EP (Extended Play) provides recording time three times as long as SP
(Standard Play). However, SP produces better picture and audio quality. Press z REC to start recording. REC appears in the display window. To stop recording Press x STOP. To check the remaining tape length Press DISPLAY to display the time counter. With the display on, press DISPLAY again to check the remaining time. The white bar indicates the current location in relation to the entire tape length. The remaining time also appears. Press DISPLAY to turn off the indicators. Time counter Remaining tape length To check the remaining tape length of a tape, set Tape Length in the VIDEO FUNCTION SETUP menu correctly (page 88). Maximum Recording Time Tape Length T-120 T-160 T-180 SP 2 hrs 2 hrs 40 mins 3 hrs EP 6 hrs 8 hrs 9 hrs i B a s c O p e r a t i o n s continued Recording TV programs 39 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 40 Saturday, March 15, 2003 4:29 PM To watch another TV program while recording 1 Press TV/VIDEO to display TV in the display window. TVs antenna input; if not, skip this step. 2 If your TV is connected to the VCR using A/V connections, set the TV to the 3 Select another channel on the TV. To watch a DVD while recording 1 Press SELECT DVD to control the DVD player. 2 Press Z and place the disc on the disc tray. 3 Press H PLAY. The disc tray closes and the DVD player starts playback. The TV screen will automatically change to the DVD playback screen. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape. Tips
To select a channel, you can use the Safety tab number buttons on the remote commander. Enter the channel number, then press ENTER.
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT SELECT button.
The display appears on the TV screen in dicating information about the tape, but the information will not be recorded on the tape. If you do not want to watch TV while recording, you can turn off the TV. When using a cable box, make sure to leave it on. Notes
The remaining tape length may not be indicate d accurately for short tapes such as T-20 or T-30, or tapes recorded in the LP mode.
The display does not appear during still (pause) mode or slow-motion playback. It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY.
You cannot record a DVD to a VCR tape.
To watch a TV program during video recording, stop disc playback. 40 Recording TV programs filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 41 Saturday, March 15, 2003 4:29 PM Recording TV programs using the timer You can preset up to eight programs at a time. Before you start
Check that the DVD-VCR clock is set to the correct time.
Turn on the DVD-VCR and your TV.
Switch the input sele ctor on your TV so that the signal from the player appears on the TV screen.
Set TV / DVDVIDEO to DVDVIDEO, then press SELECT VIDEO to control the VCR (page 11).
When using a cable box, turn it on.
Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time.
If the DVD player is in play mode, you cannot display the SETUP MENU. Stop the DVD playback.
?/1 CLEAR SET UP TIMER INPUT SELECT x STOP V/v/B/b ENTER O RETURN 1 Press SET UP. The SETUP MENU appears. You can also use the TIMER button in VIDEO mode, then you can skip step 2. i B a s c O p e r a t i o n s continued Recording TV programs using the timer 41 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 42 Saturday, March 15, 2003 4:29 PM 2 3 4 5 6 Press V/v/B/b to select Recording), then press ENTER. The program menu appears.
(Set Timer If necessary, press V/v to select the row that is to be set. Set the channel number, start and stop time, date, and tape speed:
1 Press b to flash each item in turn. 2 Press V/v to set each item. To correct a setting, press B to return to that setting and reset. To record from a source connected to the LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or V/v to display L1 or L2 in the CH position. To record the same program every day or the same day every week, press v while the date is flashing. For details, see Daily/weekly recording below. To use the Auto Tape Speed function, press v to display AUTO in the SPD position. For details, see To use the Auto Tape Speed function on page 43. Press O RETURN to confirm the setting. indicator appears in the display window. The To enter another setting, press V/v to select the next row and repeat step 4. Press CLEAR repeatedly to cancel the setting. Press O RETURN repeatedly to exit the menu. The DVD-VCR stands by for recording (you do not have to turn off the DVD-VCR). When using a cable box, leave it on. 42 Recording TV programs using the timer filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[\\Win-78\got78\2003combo\3083945111\3083945111SLVD300PUC\010BAS.fm]
010BAS.fm Page 43 Thursday, March 20, 2003 1:35 PM To stop recording To stop the DVD-VCR while recording, press SELECT VIDEO and then press x STOP. Daily/weekly recording In step 4 above, press v to select the recording pattern. Each time you press v, the indication changes as shown below. Press V to change the indication in reverse order. MO~FR t SUNS t MONS t ..... t SATS t 1 month later t (dates count down) t the current date To use the Auto Tape Speed function When you are recording a program in the AUTO mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the EP mode. Note that some noise will appear on the picture when the tape speed is changed. If you want to keep the tape speed, select SP. To operate this function, set Tape Length in VIDEO FUNCTION SETUP menu correctly (page 88). To watch another TV program after setting the timer 1 Press TV/VIDEO to display TV in the display window. TVs antenna input; if not, skip this step. 2 If your TV is connected to the VCR using A/V connections, set the TV to the 3 Select another channel on the TV. To watch a DVD after setting the timer 1 Press SELECT DVD to control the DVD player. 2 Press Z and place the disc on the disc tray. 3 Press H PLAY. The disc tray closes and the DVD player starts playback. The TV screen will automatically change to the DVD playback screen. Tips
To set the channel, you can also use V/v. i B a s c O p e r a t i o n s indicator appears, the timer settings overlap. To check, change or cancel the program If the setting, repeat the steps of Recording TV programs using the timer on page 41. If the indicator appears, th is means that the VCR is currently recording this program.
You can also do the following ta sks while the VCR is recording:
Reset the counter (page 37). Display tape information on the TV screen (page 39). Recording TV programs using the timer 43 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 44 Saturday, March 15, 2003 4:29 PM Checking/changing/canceling timer settings
?/1 CLEAR SET UP TIMER V/v/B/b ENTER O RETURN 1 Press SET UP when the DVD player is in stop mode. The SETUP MENU appears. You can also use the TIMER button in VIDEO mode, then you can skip step 2. 44 Checking/changing/canceling timer settings filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BAS.fm]
010COV.book Page 45 Saturday, March 15, 2003 4:29 PM 2 3 4 5 Press V/v/B/b to select
If you want to change a setting, go on to the next step.
If you do not need to change the settings, press O RETURN repeatedly Set Timer Recording, then press ENTER. to exit the menu, then turn off the VCR to return to recording standby. Press V/v to select setting you want to change or cancel.
To change the setting, press B/b to flash the item you want to change, and press V/v to change it.
To cancel the setting, press CLEAR. Press O RETURN to confirm the setting. The indicator appears in the display window. Press O RETURN repeatedly to exit the menu. The DVD-VCR stands by for recording (you do not have to turn off the DVD-VCR). When using a cable box, leave it on. When the timer settings overlap The program that starts first has priority and the second program starts recording only after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority. Program 1 Program 2 Will be cut off i B a s c O p e r a t i o n s Checking/changing/canceling timer settings 45 filename[010BAS.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADV.fm]
010COV.book Page 46 Saturday, March 15, 2003 4:29 PM Advanced Hookups A/V Receiver hookup A Use this hookup if your A/V receiver has a Dolby* Surround (Pro Logic) decoder and 3 to 6 speakers You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-channel audio (Dolby Digital) discs. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-
D symbol are trademarks of Dolby Laboratories. DVD-VCR
(red) Stereo audio cord
(not supplied)
(white) to LINE OUT L/R (AUDIO) l: Signal flow to audio input
(white)
(red)
[Speakers]
Amplifier (receiver) with Dolby Surround decoder
[Speakers]
Rear (L) Rear (R) Front (L) Front (R) Subwoofer Center Rear (mono) Note
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer. 46 A/V Receiver hookup filename[010ADV.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADV.fm]
010COV.book Page 47 Saturday, March 15, 2003 4:29 PM B Use this hookup if your A/V reciever has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers This connection will allow you to use the Dolby Digital or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player. You must make connections using DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. and B-1 B-2
. DVD-VCR
(red) Stereo audio cord
(not supplied) Coaxial digital cord
(not supplied)
(white) and or to DIGITAL OUT
(COAXIAL or OPTICAL) to LINE OUT L/R (AUDIO) l: Signal flow to audio input
[Speakers]
(white)
(red) AV amplifier (receiver) having a decoder Optical digital cord
(not supplied) Remove jack cap before connecting to coaxial or optical digital input
[Speakers]
Rear (L) Subwoofer Front (L) Center A d v a n c e d H o o k u p s Rear (R) Front (R) Note
After you have completed the connection, be sure to set Dolby Digital to Dolby Digital and DTS to On in Audio Setup (page 50). Otherwise, no sound or a loud noise will come from the speakers. A/V Receiver hookup 47 filename[010ADV.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADV.fm]
010COV.book Page 48 Saturday, March 15, 2003 4:29 PM S-Video/Component Video hookup Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/
Component Video hookup. A Use this hookup if your TV has an S VIDEO input jack Connect an S VIDEO cord (not supplied). You will enjoy high quality images. DVD-VCR or or Audio cord
(not supplied) Coaxial digital cord
(not supplied) l : Signal flow
(DVD only) TV Optical digital cord (not supplied) Remove jack cap before connecting S VIDEO cord
(not supplied) to audio input to coaxial or optical digital input TV or AV amplifier Notes
Set Video Out to S-Video in the SCREEN SETUP menu (page 53) to view pictures from the S VIDEO jack.
The connection using S VIDEO OUT jack is only for the DVD player. 48 S-Video/Component Video hookup filename[010ADV.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADV.fm]
010COV.book Page 49 Saturday, March 15, 2003 4:29 PM B Use this hookup if your TV has component video input jacks Connect your TV via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images. See page 48 for audio connections. DVD-VCR
(blue)
(red)
(green) Component video cord
(not supplied) l : Signal flow
(DVD only) TV
(green)
(blue)
(red) A d v a n c e d H o o k u p s If your TV accepts progressive (480p) format signals, you must use this connection and then press the PROGRESSIVE button on the front panel to accept progressive video signals. The PROGRESSIVE indicator lights up in blue when the DVD player outputs progressive signals. PROGRESSIVE button/indicator Notes
Set Video Out to Compone nt in the SCREEN SETUP menu (page 53) to view pictures from the component video jacks.
The connection using COMPONENT VIDEO OU T jack is only for the DVD player. S-Video/Component Video hookup 49 filename[010ADV.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 50 Saturday, March 15, 2003 4:29 PM DVD Settings and Adjustements Audio Setup Audio Setup allows you to set the sound according to the playback and connection conditions. SET UP V/v/B/b ENTER O RETURN 1 2 3 Press SET UP when the DVD player is in stop mode. The SETUP MENU appears. Press V/v/B/b to select then press ENTER. The DVD SETUP menu appears.
(DVD Setup), Press V/v to select Audio Setup, then press ENTER. 50 Audio Setup filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 51 Saturday, March 15, 2003 4:29 PM 4 5 6 Press V/v to select the setup item from the displayed list:
Dolby Digital, DTS, or Audio DRC. Press B/b to select an item, then press O RETURN to confirm the setting. Press O RETURN repeatedly to exit the menu. Menu choices
Dolby Digital (DVD only) Selects the type of Dolby Digital signal. The default setting is indicated in bold print. D-PCM Dolby Digital Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. Select this when the player is connected to an audio component with a built-in Dolby Digital decoder.
DTS (DVD only) Selects whether or not to output DTS signals. The default setting is indicated in bold print. Off On Select this when the player is connected to an audio component lacking a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder.
Audio DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to Audio DRC. This affects the output from the following jacks:
LINE OUT AUDIO L/R jacks DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when Dolby Digital is set to D-PCM. The default setting is indicated in bold print. Standard TV Mode Normally select this position. Makes the low sounds clear even if you turn the volume down. D V D S e t t i n g s j a n d A d u s t e m e n t s continued Audio Setup 51 filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 52 Saturday, March 15, 2003 4:29 PM Notes If you select surround setting while playing a DV D, the player does not output Dolby Digital signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set Dolby Digital to D-PCM). If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. 52 Audio Setup filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 53 Saturday, March 15, 2003 4:29 PM Screen Setup Screen Setup allows you to set the screen according to the playback and connection conditions. SET UP V/v/B/b ENTER O RETURN 1 2 3 Press SET UP when the DVD player is in stop mode. The SETUP MENU appears. Press V/v/B/b to select then press ENTER. The DVD SETUP menu appears.
(DVD Setup), Press V/v to select Screen Setup, then press ENTER. D V D S e t t i n g s j a n d A d u s t e m e n t s continued Screen Setup 53 filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 54 Saturday, March 15, 2003 4:29 PM 4 5 6 Press V/v to select the setup item from the displayed list:
TV Type, Black Level, or Video Out. Press B/b to select an item, then press O RETURN to confirm the setting. Press O RETURN repeatedly to exit the menu. Menu choices
TV Type (DVD only) Selects the aspect ratio of the connected TV (4:3 standard or wide). The default setting is indicated in bold print. 4:3 Letter Box 4:3 Pan Scan Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 16:9 Select this when you connect a wide-screen TV or a TV with a wide mode function. 4:3 Letter Box 4:3 Pan Scan 16:9
Black Level You can enhance the black level by increasing the brightness and contrast when viewing DVDs. The default setting is indicated in bold print. On Off Increases the contrast. Stops the increase of the contrast. 54 Screen Setup filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 55 Saturday, March 15, 2003 4:29 PM
Video Out You must set this setting when you use S VIDEO OUT or COMPONENT VIDEO OUT jacks to connect to the TV. The default setting is indicated in bold print. S-Video Component Select this when you use the S VIDEO OUT jack on the rear panel to connect to the TV. Select this when you use the COMPONENT VIDEO OUT jacks on the rear panel to connect to the TV. Tip
You can select the type of signal outp ut from the COMPONENT VIDEO OUT jacks. When you press the PROGRESSIVE button on the front panel, progressive signal is selected and the PROGRESSIVE indicator lights up in blue. Select this when you have a TV that can accept progressive signal. When you are connected to a standard (interlace format) TV, turn off the PROGRESSIVE indicator. Notes
Playback settings stored in the disc take pr iority over the DVD SETUP menu settings and not all the functions described may work.
Depending on the DVD, 4:3 Letter Box may be selected automatically instead of 4:3 Pan Scan or vice versa.
The connection using S VIDEO OUT or COMP ONENT VIDEO OUT jacks is only for the DVD player. If you select progressive signal when you conn ect the DVD player to a TV that cannot accept the signal in progressive format, the image quality will deteriorate. In this case, press the PROGRESSIVE button to turn off the PROGRESSIVE indicator.
You can output progressive signal only from COMPONENT VIDEO OUT jacks. If you turn on the PROGRESSIVE indicator when you set Video Out to S-video, COMPONENT VIDEO OUT takes priority over S VIDEO OUT. D V D S e t t i n g s j a n d A d u s t e m e n t s Screen Setup 55 filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 56 Saturday, March 15, 2003 4:29 PM Setting the display or sound track language You can set various languages for the discs menu, sound track or subtitle. SET UP V/v/B/b ENTER O RETURN 1 2 3 Press SET UP when the DVD player is in stop mode. The SETUP MENU appears. Press V/v/B/b to select then press ENTER. The DVD SETUP menu appears.
(DVD Setup), Press V/v to select the language setup item from the displayed list:
DVD Menu, Audio, or Subtitle. Then press ENTER. 56 Setting the display or sound track language filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 57 Saturday, March 15, 2003 4:29 PM 4 5 Press V/v to select the desired language, then press ENTER.
DVD MENU LANGUAGE You can select the desired language for the discs menu.
AUDIO LANGUAGE Switches the language of the sound track. When you select Original, the language given priority in the disc is selected.
SUBTITLE LANGUAGE Switches the language of the subtitle recorded on the DVD. When you select Audio Follow, the language for the subtitles changes according to the language you selected for the sound track. Press O RETURN repeatedly to exit the menu. Tip If you select Others in step 4, an additional language menu appears. Press V/v/B/b to select the desired language, then press ENTER. Notes
When you select a language that is not recorded on the DVD in step 4, one of the recorded languages will be automatically selected.
Playback settings stored in the disc take prio rity over the DVD SETUP settings and not all the functions described may work. D V D S e t t i n g s j a n d A d u s t e m e n t s Setting the display or sound track language 57 filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 58 Saturday, March 15, 2003 4:29 PM Parental Control (limiting playback by children) Playback of some DVDs can be limited according to a predetermined level such as the age of the users. The PARENTAL CONTROL function allows you to set a playback limitation level. Number buttons SET UP V/v/B/b ENTER 1 2 Press SET UP when the DVD player is in stop mode. The SETUP MENU appears. Press V/v/B/b to select then press ENTER. The DVD SETUP menu appears.
(DVD Setup), 58 Parental Control (limiting playback by children) filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 59 Saturday, March 15, 2003 4:29 PM 3 4 Press V/v to select Parental, then press ENTER. Press b to select Yes.
If you have not entered a password The display for registering a new password appears. Enter a 4-digit password using the number buttons. The display for confirming the password appears. Re-enter the password.
When you have already registered a password The display for entering the password appears. Enter a 4-digit password using the number buttons. 5 Press V/v to select Rating Level, then press ENTER. D V D S e t t i n g s j a n d A d u s t e m e n t s Parental Control (limiting playback by children) 59 continued filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010SET.fm]
010COV.book Page 60 Saturday, March 15, 2003 4:29 PM 6 7 Press V/v to select the level you want, then press ENTER. The options are as follows. Level 8 (Adult) y Level 7 y Level 6 y Level 5 y Level 4 y Level 3 y Level 2 y Level 1 (Kids Safe) The higher the value, the stricter the limitation. Press O RETURN repeatedly to exit the menu. To change the password The display for entering a new password appears. 1 Select Change Password in step 4. 2 Enter a new 4-digit password using the number buttons. 3 Re-enter the new password. The display for confirming the password appears. To turn off the Parental Control function Set Use Password to No in Step 4. To play a disc for which Parental Control is set The display for entering your password appears. 1 Insert the disc, then press H PLAY. 2 Enter your 4-digit password using the number buttons. The player starts playback. If you forget your password 1 Remove the disc and turn off the DVD-VCR. 2 Turn on the DVD-VCR again with no disc in the unit. 3 Hold down m and M on the front panel simultaneously for 5 seconds. 4 Turn off the DVD-VCR. 5 To create a new passward, follow step 4 on page 59. reset ok appears on the screen. The password is cleared. Notes
When you play DVDs which do not have the Pa rental Control function, playback cannot be limited on this player.
All the ratings higher than the level you select will be blocked.
Write your password down and keep it in a safe place in case you forget it. 60 Parental Control (limiting playback by children) filename[010SET.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
1 | Users Manual 2 | Users Manual | 2.08 MiB |
filename[G:\2003combo\3083945111\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 61 Wednesday, March 19, 2003 10:21 AM DVD Additional Operations Using the DVDs menu A DVD is divided into long sections of a picture or a music feature called titles. When you play a DVD which contains several titles, you can select the title you want using the TOP MENU button. When you play DVDs that allow you to select items such as the language for the subtitles and the language for the sound, select these items using the MENU button. Number buttons V/v/B/b ENTER MENU TOP MENU 1 2 3 Press TOP MENU or MENU. The discs menu appears on the TV screen. The contents of the menu vary from disc to disc. Press V/v/B/b to select the item you want to play or change. You can also use the number buttons to select the item. Press ENTER. D V D A d d i t i o n a l O p e r a t i o n s Note Depending on the DVD, you may not be able to use the TOP MENU button. Using the DVDs menu 61 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 62 Saturday, March 15, 2003 4:29 PM Zooming into a scene You can zoom into a scene during playback or still mode. To zoom into a JPEG image, see Playing JPEG image files on page 78. ZOOM V/v/B/b ENTER 1 2 3 Press ZOOM. appears. Press V/v/B/b to move to the position where you want to zoom in. Press ENTER repeatedly to change the magnification. Each time you press the button, the magnification changes as shown below. 2 t 4 t 2 t normal magnification Notes
You cannot use 4 magnification when you play VIDEO CDs.
The zoom function may not work depending on the DVD. 62 Zooming into a scene filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 63 Saturday, March 15, 2003 4:29 PM Changing the angles If various angles (multi-angles) for a scene are recorded on the DVD, appears in the display when you press ANGLE during playback. This means that you can change the viewing angle. ANGLE B/b 1 2 Press ANGLE during playback. The angle number appears on the display. The number after the slash indicates the total number of angles. Press B/b repeatedly to select the angle number. The scene changes to the selected angle. Note
Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD. D V D A d d i t i o n a l O p e r a t i o n s Changing the angles 63 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 64 Saturday, March 15, 2003 4:29 PM Displaying the subtitle If subtitles are recorded on the disc, you can change the subtitles or turn them on and off whenever you want while playing a DVD. SUBTITLE V/v/B/b ENTER 1 2 3 Press SUBTITLE during playback. Press B/b repeatedly to select the language. Depending on the DVD, the choice of language varies. Refer to DVD Audio/Subtitle Language on page 108 for the abbreviation of the language. Press V/v repeatedly to select On. To turn off the subtitles Select Off in step 3. Note
Depending on the DVD, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to turn them off. 64 Displaying the subtitle filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 65 Saturday, March 15, 2003 4:29 PM Various play mode functions (Program play, Shuffle play, Repeat play) You can set the following play modes:
Program play (page 65)
Shuffle play (page 67)
Repeat play (page 68) Note
The play mode is canceled when:
you open the disc tray the player enters standby mode by pressing [/1. Creating your own program (Program play) You can play the contents of a disc in the order you want by arranging the order of the chapters or tracks on the disc to create your own program. You can program up to 20 chapters and tracks. Number buttons CLEAR REPEAT H PLAY V/v/B/b ENTER D V D A d d i t i o n a l O p e r a t i o n s Various play mode functions (Program play, Shuffle play, Repeat play) 65 continued filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 66 Saturday, March 15, 2003 4:29 PM 1 2 3 4 5 Press REPEAT when the DVD player is in stop mode. Press B/b to select PROGRAM, then press ENTER. Press V/v/B/b to select the track number you want to program, then press ENTER. You can also use the number buttons to enter the track number. To program other tracks, repeat step 3. The programed track numbers are displayed in the selected order. Press H PLAY to start program play. Program play starts. When the program ends, you can restart the same program again by pressing H PLAY. To stop program play Press CLEAR. To change or cancel a program 1 Follow steps 1 and 2 of Creating your own program (Program play). 2 Press CLEAR. 3 Follow step 3 for new programing. The last programed number is canceled. Note
You can do repeat play or shuffle play of th e programed tracks. During program play, follow the steps of Playing repeatedly (Repeat play) (page 68) or Playing in random order
(Shuffle play) (page 67). 66 Various play mode functions (Program play, Shuffle play, Repeat play) filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 67 Saturday, March 15, 2003 9:03 PM Playing in random order (Shuffle play) You can shuffle the playback order of tracks. Subsequent shuffling may produce a different playing order. CLEAR REPEAT V/v/B/b ENTER 1 2 Press REPEAT when the DVD player is in stop mode. Press B/b to select SHUFFLE, then press ENTER. To return to normal play Press CLEAR. D V D A d d i t i o n a l O p e r a t i o n s Various play mode functions (Program play, Shuffle play, Repeat play) 67 continued filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 68 Saturday, March 15, 2003 4:29 PM Playing repeatedly (Repeat play) You can play all of the titles or tracks on a disc or a single title, chapter, or track repeatedly. CLEAR REPEAT B/b 1 2 Press REPEAT during playback. Press REPEAT or B/b repeatedly to select the item to be repeated. When playing a DVD
Chapter: repeats the current chapter.
Title: repeats the current title on a disc. When playing a VIDEO CD or CD
Track: repeats the current track.
Disc: repeats all of the tracks. When playing a DATA CD (MP3 audio)
Track: repeats the current track. To return to normal play Select Off or press CLEAR in step 2. 68 Various play mode functions (Program play, Shuffle play, Repeat play) filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 69 Saturday, March 15, 2003 4:29 PM Using bookmarks You can store scenes in the players memory as bookmarks. You can set up to three bookmarks. Select MENU OFF before setting up bookmarks on a VIDEO CD (see Playing VIDEO CDs with MENU ON/OFF Functions on page 81). 1 2 3 Press BOOKMARK during playback. Three bookmark placeholders (- - - ) appear next to the bookmark icon. Press B/b to select one of the placeholders. Play the DVD scene you want, then press ENTER. The selected placeholder changes to a number
(1, 2 or 3). CLEAR BOOKMARK H PLAY B/b ENTER D V D A d d i t i o n a l O p e r a t i o n s continued Using bookmarks 69 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 70 Saturday, March 15, 2003 4:29 PM To cancel the bookmark Press CLEAR after step 3. To exit the Bookmark menu Press BOOKMARK. To playback the scene where you insert a bookmark 1 Press BOOKMARK during playback. 2 Press B/b to select the bookmark placeholder, then press H PLAY to play the bookmark. Note
Depending on the DVD, you may not be able to use the bookmark function. 70 Using bookmarks filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 71 Saturday, March 15, 2003 4:29 PM Changing the sound When playing a DVD recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can change the audio format. If the DVD is recorded with multilingual tracks, you can also change the language. With CDs, DATA CDs, or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can hear the instruments from both speakers by selecting the left channel. AUDIO B/b 1 2 Press AUDIO during playback. Press B/b repeatedly to select the desired language/audio setting.
When playing a DVD Depending on the DVD, the choice of language varies. Refer to DVD Audio/Subtitle Language on page 108 for the abbreviation of the language.
When playing a VIDEO CD or CD The default setting is indicated in bold print. STEREO Left Right The standard stereo sound The sound of the left channel (monaural) The sound of the right channel (monaural) D V D A d d i t i o n a l O p e r a t i o n s Changing the sound 71 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 72 Saturday, March 15, 2003 4:29 PM Virtual surround setting When you connect a stereo TV or 2 front speakers, SURROUND lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers without using actual rear speakers. This function is designed to work with the LINE OUT AUDIO L/R jacks. SURROUND 1 2 Press SURROUND during playback. Press SURROUND repeatedly to select On. To cancel the setting Select Off in step 2. 72 Virtual surround setting filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 73 Saturday, March 15, 2003 4:29 PM Notes
When the playing signal does not contain a signal for the rear speakers, the surround effects will be difficult to hear.
When you activate the surround effect, turn off the surround setting of the connected TV or amplifier (receiver).
Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set Dolby Digital to Dolby Digital or DTS to On in AUDIO SETUP menu, sound will come from your speakers but it will not have the surround effect.
Portions of this product are licensed from Desp er Products, Inc., a subsidiary of Spatializer Audio Laboratories, Inc. Copyright 1997-2001Spatializer, N-2-2, and the circle-in-
square device are trademarks of Desper Products, Inc. D V D A d d i t i o n a l O p e r a t i o n s Virtual surround setting 73 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 74 Saturday, March 15, 2003 4:29 PM Playing an MP3 audio track You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1 Audio Layer 3) format. Z
./ >
H PLAY V/v/B/b ENTER O RETURN 1 2 Press Z and place a DATA CD on the disc tray, then press Z to close the tray. When you load a DATA CD which contains MP3 audio tracks and JPEG image files, Select a Media Type menu appears. If you load a DATA CD which contains only MP3 audio files, the MP3 display appears. Then you can skip step 2. Press V/v to select MP3, then press ENTER. 74 Playing an MP3 audio track filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 75 Saturday, March 15, 2003 4:29 PM 3 4 5 Press V/v or ./ > to select the desired track, then press ENTER. The selected track starts playing. When a track or album is being played, its title is shaded. The playing track number appears on the display window. To change the album, press O RETURN. Press V/v to select an album, then press ENTER. The list of tracks contained in the album appears. To select a track, repeat step 2. To go to the next or previous page Press b or B. To return to the previous display Press O RETURN. To return to the Select a Media Type menu Press x STOP twice, then press TOP MENU. To turn off the display Press x STOP, then press O RETURN repeatedly. Notes
Only the letters in the alphabet and numbers can be used for album or track names. Anything else is displayed as an asterisk.
Up to 10 alphanumeric characters can be displayed for album or track names. ID3 tags cannot be displayed. D V D A d d i t i o n a l O p e r a t i o n s continued Playing an MP3 audio track 75 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 76 Saturday, March 15, 2003 4:29 PM About MP3 audio tracks You can play MP3 audio tracks on CD-ROMs, CD-Rs, or CD-RWs. However, the discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the player to recognize the tracks. You can also play discs recorded in Multi Session. See the instructions of the CD-R/RW device or recording software (not supplied) for details on the recording format. To play a Multi Session CD This player can play Multi Session CDs when an MP3 audio track is located in the first session. Any subsequent MP3 audio tracks, recorded in the later sessions, can also be played back. When audio tracks and images in music CD format or video CD format are recorded in the first session, only the first session will be played back. Notes If you put the extension .MP3 to data not in MP3 format, the player cannot recognize the data properly and will generate a loud noise which could damage your speaker system.
The player cannot play audio tracks in MP3PRO format.
This player supports MP3 audio tracks recorded with a bit rate of 128 kbps and a sampling frequency of 44.1 kHz. Attempting to play MP3 audio tracks recorded with different specifications may result in loud noise, sound skipping or speaker damage.
Depending on the disc, playback may take some time to start. The Playback order of MP3 audio tracks The playback order of albums and tracks recorded on a DATA CD is as follows.
Structure of disc contents Tree 1 Tree 2 Tree 3 Tree 4 Tree 5 album track 76 Playing an MP3 audio track filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 77 Saturday, March 15, 2003 4:29 PM When you insert a DATA CD and press H PLAY, the numbered tracks are played sequentially, from 1 through 7. Any sub-albums/tracks contained within a currently selected album take priority over the next album in the same tree. (Example: C contains D so 4 is played before 5.) When you press O RETURN and the list of MP3 albums appears (page 75), the albums are arranged in the following order: A t B t C t D t F t G. Albums that do not contain tracks (such as album E) do not appear in the list. Tips If you add numbers (01, 02, 03, etc.) to the front of the track file names, the tracks will be played in that order.
Since a disc with many trees takes longer to st art playback, place your albums within the first two trees. Notes
Depending on the software you use to create the DATA CD, the playback order may differ from the illustration above.
The playback order above may not be applicable if there are more than a total of 200 albums and tracks in the DATA CD.
The player can recognize up to 100 albums (the player will count just albums, including albums that do not contain MP3 audio tracks). The player will not play any albums beyond the first 100 albums. Of the first 100 albums, the player will play no more than a combined total of 200 albums and tracks. D V D A d d i t i o n a l O p e r a t i o n s Playing an MP3 audio track 77 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 78 Saturday, March 15, 2003 9:04 PM Playing JPEG image files You can play JPEG image files on DATA CDs
(CD-ROMs/CD-Rs/CD-RWs). Z
./ >
H PLAY V/v/B/b ENTER TOP MENU DISPLAY 1 2 Press Z and place a DATA CD on the disc tray, then press Z to close the tray. When you load a DATA CD which contains MP3 audio tracks and JPEG image files, Select a Media Type menu appears. If you load a DATA CD which contains only JPEG image files, the ALBUM display appears. Then you can skip step 2. Press V/v to select JPEG, then press ENTER. The ALBUM display will appears. To display the total number of JPEG image files on the disc, press DISPLAY. DISPLAY 78 Playing JPEG image files filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010DVD.fm Page 79 Monday, March 17, 2003 6:28 PM 3 4 Press ./ > to select the next/previous ALBUM page, press V/v/B/b to select an image in the ALBUM display, then press H PLAY. The TIMER menu appears. Press B/b to select the desired play speed, then press ENTER. Slide show starts from the selected image. To display an image 1 Press V/v/B/b to select an image in the ALBUM display, then press ENTER. The selected image number appears in the display window. 2 To display the next/previous image, press ./ >. To rotate an image 1 Press V/v/B/b to select an image in the ALBUM 2 Press B/b to select ROTATE, then press ENTER. display, then press ENTER. Each time you press ENTER, the image turns clockwise by 90. display, then press ENTER. To zoom in an image 1 Press V/v/B/b to select an image in the ALBUM 2 Press B/b to select ZOOM, then press ENTER. 3 Press V/v/B/b to move 4 Press ENTER repeatedly to change the magnification. to the position where you want to zoom in. appears. Each time you press ENTER, the magnification changes as shown below. 2 t 4 t 2 t normal magnification D V D A d d i t i o n a l O p e r a t i o n s continued Playing JPEG image files 79 filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010DVD.fm Page 80 Monday, March 17, 2003 6:28 PM display, then press ENTER. To enjoy the Slide show 1 Press V/v/B/b to select an image in the ALBUM 2 Press B/b to select SLIDE, then press ENTER. 3 Press B/b to select the desired play speed, then press The TIMER menu appears. ENTER. Slide show starts. To turn on/off the menu in the single image display Press DISPLAY in the single image display. To turn on/off the total number of images in the ALBUM display Press DISPLAY in the ALBUM display. To return to the ALBUM display Press DISPLAY to turn on the menu and press B/b to select ALBUM, then press ENTER. You can also use MENU button to return to the ALBUM display. Press
. repeatedly to return to the first ALBUM page. To return to the Select a Media Type menu Press x STOP twice, then press TOP MENU. Notes
Slide show can play in only one direction.
You cannot rotate or zoom in the image during Slide show. If you select ALBUM in the rotated image di splay, the images in the ALBUM display will also be rotated. Correct the rotation in the ROTATE menu. About JPEG image files You can play JPEG image files on CD-ROMs, CD-Rs, or CD-RWs. However, the discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the player to recognize the files. You can also play discs recorded in Multi Session. See the instructions of the CD-R/RW device or recording software (not supplied) for details on the recording format. To play a Multi Session CD This player can play Multi Session CDs when an JPEG image file is located in the first session. Any subsequent JPEG image files, recorded in the later sessions, can also be played back. When audio tracks and images in music CD format or video CD format are recorded in the first session, only the first session will be played back. Notes
The system can play the extension .JPG or .JPEG.
Some CD-Rs or CD-RWs cannot be played on this system depending on file format. If you put the extension .JPG or .JPEG to data not in JPEG format, the player cannot recognize the data properly.
Depending on the disc, playback may take some time to start. Tip If you add numbers (01, 02, 03, et c.) to the front of the file names, the files will be played in that order. 80 Playing JPEG image files filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 81 Saturday, March 15, 2003 4:29 PM Playing VIDEO CDs with MENU ON/OFF Functions The PBC (Playback control) function allows you to search and perform other operations interactively. PBC playback follows a selection menu displayed on your TV screen. The MENU ON function is the PBC function. Number buttons
./>
H PLAY x STOP V/v ENTER O RETURN MENU 1 2 Press MENU to select MENU ON. The menu for your selection appears. Press V/v to select the item number you want. You can also use the number buttons to select the item number and track. D V D A d d i t i o n a l O p e r a t i o n s Playing VIDEO CDs with MENU ON/OFF Functions 81 continued filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010DVD.fm]
010COV.book Page 82 Saturday, March 15, 2003 4:29 PM 3 4 Press ENTER. Follow the instructions in the menu for interactive operations. Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD. To return to the menu Press O RETURN. To play using MENU OFF Press MENU to select MENU OFF. When MENU OFF is selected, the DVD player starts continuous play. You cannot play still pictures such as a menu. To return to MENU ON, press MENU to select MENU ON. Note
Depending on the VIDEO CD, Press ENTER in step 3 may appear as Press SELECT in the instructions supplied with the disc. In this case, press H PLAY. 82 Playing VIDEO CDs with MENU ON/OFF Functions filename[010DVD.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 83 Saturday, March 15, 2003 4:29 PM VCR Additional Operations Quick Timer Recording After you have started recording, you can have the VCR stop recording automatically after a specified duration. z REC x STOP 1 While recording, press z REC. 2 Press z REC repeatedly to set the duration time. Each press advances the time as follows. 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 Normal recording The tape counter decreases minute by minute to 0:00, then the VCR stops recording. To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the normal recording mode. To stop while recording Press x STOP. indicator disappears and the VCR returns to Note
You cannot display the current tape time in the display window when setting the recording duration time. V C R A d d i t i o n a l O p e r a t i o n s Quick Timer Recording 83 filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 84 Saturday, March 15, 2003 4:29 PM Recording stereo and bilingual programs Recording stereo programs When you receive a program broadcast in stereo, press AUDIO to display Hi-Fi on the TV screen. You can also select Left, Right, or Mono. If there is noise in the stereo program, select Mono. The sound will be recorded in monaural (on both hi-
fi and normal audio tracks) but with less noise. Recording bilingual programs Press AUDIO to display SAP on the TV screen. When a SAP (Second Audio Program) is received, SAP appears on the TV screen. When MAIN is selected, the VCR records only the main sound. Selecting the sound during playback During playback, press AUDIO to select the sound you want. To listen to Stereo Left channel Right channel Monaural sound on the normal audio track On-screen display Display window Hi-Fi Left Right Mono STEREO indicator STEREO indicator STEREO indicator No indicator How sound is recorded on a video tape The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. Normal audio track Hi-fi audio track
(main track) Monaural sound Stereo sound
(left/right channels) Notes
To play a tape in stereo, yo u must use the A/V connections.
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the AUDIO setting. 84 Recording stereo and bilingual programs filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 85 Saturday, March 15, 2003 4:29 PM Searching using various functions The VCR automatically marks the tape with an index signal at the point where each recording begins. You can easily find a specific point using various search functions. SEARCH MENU H PLAY V/v/B/b To search using the index function (Scan and Play) The VCR automatically marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. 1 Insert an indexed tape into the VCR. 2 Press SEARCH MENU. V C R A d d i t i o n a l 3 Press b to scan ahead, or B to scan backwards. The VCR searches and then plays back for about five seconds. O p e r a t i o n s 4 Press H PLAY to view that program. If you do not press H PLAY, the VCR automatically searches for the next index mark, or until it reaches the end of the tape. continued Searching using various functions 85 filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 86 Saturday, March 15, 2003 4:29 PM To search for the counter 0:00:00 point To mark a point on the tape that you want to find later, reset the tape counter to 0:00:00. The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape counter. 1 Press SEARCH MENU. 2 Press V. The VCR starts searching and automatically stops at the 0:00:00 point. To search for a blank portion of the tape The VCR automatically searches for the beginning of a blank portion. You can easily find a point you can start recording from. 1 Press SEARCH MENU. 2 Press v. The VCR starts searching and automatically stops at the beginning of a blank space. If no blank space is found, the VCR reaches the end and the tape will be ejected. Note
Once in recording mode, if the VCR is put in pa use and then released to start the recording, no index mark will be inserted. An index mark will be inserted if the channel is changed while VCR is put in pause. 86 Searching using various functions filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 87 Saturday, March 15, 2003 4:29 PM Adjusting the picture (tracking) Although the VCR automatically adjusts the tracking when playing a tape, distortion may occur if the recording is in poor condition. In this case, manually adjust the tracking. Press TRACKING +/ to display the tracking meter. The distortion should disappear as you press one of the two tracking buttons. To resume automatic tracking adjustment, eject the tape and reinsert it. Tracking meter Note
The auto tracking adjustment cannot be guaran teed to work with tapes recorded in the LP mode on other VCRs. V C R A d d i t i o n a l O p e r a t i o n s Adjusting the picture (tracking) 87 filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 88 Saturday, March 15, 2003 4:29 PM Changing menu options 1 Press SET UP when the DVD player is in stop mode. 2 Press V/v/B/b to select
(Video Function Setup), then press ENTER. The VIDEO FUNCTION SETUP menu appears. 3 Press V/v to select the option to change. 4 Press B/b to change the setting. 5 Press O RETURN repeatedly to exit the menu. Menu choices The default settings are indicated in bold print. Menu option Tape Length Set this option to
T-120 when using a T-120 or shorter length tape.
T-160 when using a T-160 length tape.
T-180 when using a T-180 or longer length tape. Auto Play
On to start playback automatically, when you insert a tape with its safety tab removed.
Off to turn off Auto play. You need to press H PLAY to start playback, even if you insert a tape with its safety tab removed. Auto Repeat
On to play back a tape re peatedly. The VCR rewinds a tape to the beginning and restarts playback automatically.
Off to turn off Auto repeat. 88 Changing menu options filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 89 Saturday, March 15, 2003 4:29 PM Editing with another VCR How to connect to record on this VCR This VCR (Recorder) TV LINE-2 IN Other VCR (Player) LINE OUT Audio/video cord (not supplied)
: Signal flow Notes
Make sure you connect the plugs to jacks of the same color. If the other VCR is a monaural type and connec ted to this VCRs LINE-2 IN jacks, connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right channel. If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise.
You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound is recorded only on the channel whose jack is connected to the audio plug. To record on both right and left channels, connect the audio plugs to the AUDIO L/R jacks using an audio/video cord (not supplied). V C R A d d i t i o n a l O p e r a t i o n s continued Editing with another VCR 89 filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDO.fm]
010COV.book Page 90 Saturday, March 15, 2003 4:29 PM Operation (when recording on this VCR) Before you start editing
Turn on the VCR and the TV and set it to the video channel.
Press INPUT SELECT or CH +/ to display LINE 1 or LINE 2 in the display window.
Press SP/EP to select the tape speed, SP or EP. X PAUSE z REC Search for the point to start playback and set it to playback pause. 1 Insert a source tape with its safety tab removed into the other (playback) VCR. 2 Insert a tape into this (recording) VCR. Search for the point to start recording 3 Press z REC on this VCR to set it to recording pause. 4 To start editing, press the X PAUSE buttons on both VCRs at the same time. and press X PAUSE. To stop editing Press the x STOP buttons on both VCRs. Tip
To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted scene begins. When it ends, press X PAUSE again to resume recording. 90 Editing with another VCR filename[010ADDO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 91 Saturday, March 15, 2003 4:29 PM Additional Information General setup information Changing setup options 1 Press SET UP when the DVD player is in stop mode. 2 Press V/v/B/b to select press ENTER. The OPTION SETUP menu appears.
(Option setup), then 3 Press V/v to select the option to change. 4 Press B/b to change the setting. 5 Press O RETURN repeatedly to exit the menu. If you have changed the RF Output Channel, a confirmation message appears. Press ENTER to confirm the changed channel. Menu choices Initial settings are indicated in bold print. Menu option Set this option to RF Output Channel
3CH when using channel 3 to receive the VCR signal.
4CH when using channel 4 to receive the VCR signal. For details, see page 92. Auto Power Off
1Hr to turn off the VCR automatically one hour after the last operation.
2Hr to turn off the VCR automatically two hours after the last operation.
Off to set no specific time to turn off. A d d i t i o n a l I n f o r m a t i o n continued General setup information 91 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 92 Saturday, March 15, 2003 4:29 PM Setting the RF Output channel When connecting the DVD-VCR to the TV using only the antenna cable, you must set the RF Output channel in the OPTION SETUP menu so that the TV can receive the correct signal from the DVD-VCR. TV
?/1 CHANNEL +/
?/1 CH +/
TV/VIDEO 1 Set the RF Output channel to 3CH or 4CH (see page 91 to set the channel), whichever channel is not used in your area. If both are used, set the switch to either channel. 2 Press ?/1 to turn on the DVD-VCR. 3 Press TV/VIDEO to turn on VCR in the DVD-VCRs display window. 4 Press CH +/ to display a channel number in the display window. 5 Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH). Select an active channel number in your area. The channel you selected in step 4 appears on the TV screen. If the channels change when you press CH +/, you have made the correct setting. Whenever you use the DVD-VCR, set the TV to the channel selected in step 1. 92 General setup information filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 93 Saturday, March 15, 2003 4:29 PM Attaching the external antenna connector When using a 300-ohm twin lead cable for a VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the DVD-VCR. 300-ohm twin lead cable Antenna connector (not supplied) 1 Loosen the screws on the antenna connector. 2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws. Attaching a UHF/VHF band mixer When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use a UHF/VHF band separator/
mixer (not supplied) to connect the antenna to the DVD-VCR. 300-ohm twin lead cable UHF/VHF band separator/
mixer (not supplied) 75-ohm coaxial cable 1 Loosen the screws on the mixer. 2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws. 4 Connect the 75-ohm coaxial cable to the mixer. A d d i t i o n a l I n f o r m a t i o n General setup information 93 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 94 Saturday, March 15, 2003 4:29 PM Troubleshooting If you have any questions or problems not covered below, please consult your nearest Sony dealer. General Troubleshooting Symptom The ?/1 switch does not function. Remedy
Connect the AC power cord securely. r e w o P The power is turned on but the DVD-
VCR does not operate. k The clock has stopped and --:--
c o C appears in the display window. l The remote commander does not function. s r e h t O The tracking meter does not appear on the screen. You cannot control other TVs.
Moisture condensation has occurred. Turn the power off, unplug the AC power cord and leave the DVD-VCR to dry for over three hours.
The clock stops if the DVD-VCR is disconnected from the wall outlet. Reset the clock (and timer).
Make sure you are pointing th e remote commander at the remote sensor on the DVD-VCR.
Replace all the batteries in the remote commander with new ones if they are weak.
Make sure the TV / DVDVIDEO switch is set correctly.
Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
The recording condition of th e tape is very poor and tracking cannot be adjusted.
Set your TVs code number. The code number may change when you replace the batteries of the remote commander. 94 Troubleshooting filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 95 Saturday, March 15, 2003 4:29 PM DVD Troubleshooting Symptom There is no picture/picture noise appears. Remedy
Re-connect the connec ting cord securely.
The connecting cords are damaged.
Check the connection to your TV (page 14) and switch the input selector on your TV so that the signal from the player appears on the TV screen.
The disc is dirty or flawed. If the picture output from your player goes through your VCR to get to your TV or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience problems even when you connect your player directly to your TV, please try connecting your player to your TVs S VIDEO input
(page 48). e r u t c P i d n u o S
You have set the player to progressive format (the PROGRESSIVE indicator lights up in blue) eventhough your TV cannot accept the progressive signal. In this case, press the PROGRESSIVE button on the front panel until the PROGRESSIVE indicator turns off (page 55).
Even if your TV is compatible with progressive format
(480p) signals, the image may be affected when you set the player to progressive format. In this case, press the PROGRESSIVE button so that the PROGRESSIVE indicator turns off and the player is set to normal
(interlace) format (page 55). Even though you set the aspect ratio in TV Type of the SCREEN SETUP menu the picture does not fill the screen. There is no picture from your VCR connected to the LINE IN jacks. There is no sound. Sound is noisy. The sound volume is low.
COMPONENT VIDEO OUT jack is not used or Video Out of the SCREEN SETUP menu is not set correctly while the PROGRESSIVE indicator lights up in blue. Check the setting (page 55) and connection (page 48) or press the PROGRESSIVE button so that the PROGRESSIVE indicator turns off.
The aspect ratio of the disc is fixed on your DVD.
The DVD player must be in standby mode to view pictures from your VCR.
Re-connect the connecting cord securely.
The connecting cord is damaged.
The player is connected to the wrong input jack on the amplifier (receiver) (page 15).
The amplifier (receiver) in put is not correctly set.
The player is in pause mode or in Slow-motion Play mode.
The player is in fast forward or fast reverse mode. If the audio signal does not come through the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack, check the audio settings (page 50).
When playing a CD with DTS sound tracks, noise will come from the LINE OUT L/R (AUDIO) jacks (page 32) or DIGITAL OUT (OPTICAL or COAXIAL) jack.
The sound volume is low on some DVDs. The sound volume may improve if you set Audio DRC to TV Mode (page 51). A d d i t i o n a l I n f o r m a t i o n continued Troubleshooting 95 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 96 Saturday, March 15, 2003 4:29 PM Symptom The disc does not play. Remedy
The disc is turned over. Insert the disc with the pla yback side facing down on the disc tray.
The disc is skewed.
The player cannot play certain discs (page 8).
The region code on the DVD does not match the player.
Moisture has condensed inside the player (page 3).
The player cannot play CD-Rs, CD-RWs, or DVD-Rs that are not finalized (page 9).
Make sure the TV / DVDVIDEO switch is set correctly.
Select correctly VIDEO or DVD with SELECT DVD/
VIDEO button. The MP3 audio track cannot be played (page 74).
The DATA CD is not recorded in the MP3 format that conforms to ISO9660 Level 1/Level 2 or Joliet.
The MP3 audio track does not have the extension .MP3.
The data is not formatted in MP3 even though it has the extension .MP3.
The data is not MPEG1 Audio Layer 3 data.
The player cannot play audio tracks in MP3PRO format. The JPEG image file cannot be played.
The DATA CD is not recorded in JPEG format that conforms to ISO9660 Level 1/Level 2 or Joliet. n o i t a r e p O The title of the MP3 audio album/
track or JPEG image album/file is not correctly displayed. The disc does not start playing from the beginning. The player starts playing the disc automatically.
The JPEG image file does not have the extension .JPG or .JPEG.
The data is not formatted in JPEG even though it has the extension .JPG or JPEG.
Length or width of the image is more than 4720 dots.
The player can only display numbers and alphabet. Other characters are displayed as asterisks.
Program play, shuffle play, or repeat play, has been selected (pages 65, 67, 68).
Resume play has taken effect (page 31).
The disc features an auto playback function. Playback stops automatically.
Wh ile playing discs with an auto pause signal, the player You cannot perform some functions such as stop, search, slow-motion play, repeat play, shuffle play, or program play. The language for the sound track cannot be changed. stops playback at the auto pause signal.
Depending on the disc, you ma y not be able to do some operations. See the operating manual that comes with the disc.
Try using the DVDs menu instead of the direct selection button on the remote (page 61).
Multilingual tracks are not recorded on the DVD being played.
The DVD prohibits the changi ng of the language for the sound track. 96 Troubleshooting filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 97 Saturday, March 15, 2003 4:29 PM Symptom The subtitle language cannot be changed or turned off. Remedy
Try using the DVDs menu instead of the direct selection button on the remote (page 61).
Multilingual subtitles are not re corded on the DVD being played.
The DVD prohibits the changing of the subtitles. The angles cannot be changed.
Try using the DVDs menu instead of the direct selection button on the remote (page 61).
Multi-angles are not recorded on the DVD being played.
The DVD prohibits changing of the angles. The player does not operate properly.
When static electricity, etc., causes the player to operate abnormally, unplug the player. n o i t a r e p O VCR Troubleshooting Symptom The playback picture does not appear on the TV screen. Remedy
Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. k c a b y a P l i g n d r o c e R The picture is not clear. The picture rolls vertically during picture search.
Adjust the tracking with the TRACKING +/ buttons.
The video heads are dirty (see the last page of Troubleshooting). Clean the video heads using a Sony video head cleaning cassette. If a Sony cleaning cassette is not available in your area, have the heads cleaned at your nearest Sony dealer (a standard service fee will be charged). Do not use a commercially available liquid type cleaning cassette, as it may damage the video heads.
The video heads may have to be replaced. Consult your local Sony dealer for more information.
Adjust the vertical hold control on the TV or monitor. The picture has no sound.
The tape is defective. If you made A/V connections, check the audio cord connection. A TV program does not appear on the TV screen.
Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input.
Select the correct source with the INPUT SELECT or CH +/ buttons. Select a channel number when recording TV programs; select L1 or L2 when recording from other equipment. TV reception is poor.
Adjust the TV antenna. The tape starts playing as soon as it is inserted. The tape is ejected when you press z REC. Nothing happens when you press z REC.
The safety tab has been removed. To record on this tape, cover the tab hole.
Check that the safety tab has not been removed.
Make sure the tape is not at its end. A d d i t i o n a l I n f o r m a t i o n continued Troubleshooting 97 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 98 Saturday, March 15, 2003 4:29 PM Symptom The timer does not operate. Remedy
C heck that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a program has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the cabl e box is turned on.
The clock stops if the DVD-VCR is disconnected from the wall outlet for more than one minute. Reset the clock and timer.
Turn the power off and unplug the AC power cord. i g n d r o c e r r e m T i A tape cannot be inserted.
Ch eck that a tape is not already in the tape compartment. s r e h t O The VCR mecanism needs to be cleaned.
Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. Symptoms caused by contaminated video heads
Normal picture
Rough picture
Unclear picture
No picture (or black & white screen appears) initial contamination terminal 98 Troubleshooting filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 99 Saturday, March 15, 2003 4:29 PM Glossary Chapter (page 33) Sections of a picture or a music feature that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded. Dolby Digital (page 46 and 51) Digital audio compression technology developed by Dolby Laboratories. This technology conforms to 5.1-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same 5.1 discrete channels of high quality digital audio found in Dolby Digital cinema audio systems. Good channel separation is realized because all of the channel data are recorded discretely and little deterioration is realized because all channel data processing is digital. Dolby Surround (Pro Logic) (page 46) Audio signal processing technology that Dolby Laboratories developed for surround sound. When the input signal contains a surround component, the Pro Logic process outputs the front, center and rear signals. The rear channel is monaural. DTS (page 51) Digital audio compression technology that Digital Theater Systems, Inc. developed. This technology conforms to 5.1-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. DTS provides the same 5.1 discrete channels of high quality digital audio. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital. DVD (page 8) A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single-sided DVD is 4.7 GB (Giga Byte), which is 7 times that of a CD. The data capacity of a double-layer and single-sided DVD is 8.5 GB, a single-layer and double-sided DVD is 9.4 GB, and double-layer and double-sided DVD is 17GB. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. Audio information is recorded in a multi-channel format, such as Dolby Digital, allowing you to enjoy a more real audio presence. Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD. A d d i t i o n a l I n f o r m a t i o n DVD-RW (page 8) A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The DVD-RW has two different modes: VR mode and Video mode. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. continued Glossary 99 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 100 Saturday, March 15, 2003 4:29 PM DVD+RW (page 8) A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format that is comparable to the DVD VIDEO format. Interlace format (page 55) Interlace format shows every other line of an image as a single field and is the standard method for displaying images on television. The even number field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image. Progressive format (page 49 and 55) Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames/60 fields in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper. This player is compatible with the 480 progressive format. Title (page 33) The longest section of a picture or music feature on a DVD, movie, etc., in video software, or the entire album in audio software. Track (page 33) Sections of a picture or a music feature on a CD or VIDEO CD (the length of a song). 100 Glossary filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 101 Saturday, March 15, 2003 4:29 PM Specifications System Laser Semiconductor laser Format VHS NTSC standard Video recording system Rotary head helical scanning FM system Video heads Double azimuth four heads Video signal NTSC color, EIA standards Tape speed 3 16 SP: 33.35 mm/s (1 7 EP: 11.12 mm/s (
LP: 16.67 mm/s (
playback only 11 inches/s) 8 inches/s) inches/s), 16 Maximum recording/playback time 8 hrs. in EP mode (with T-160 tape) Rewind time Approx. 1 min (with T-120 tape) Tuner section Channel coverage VHF 2 to 13 UHF 14 to 69 CATV A-8 to A-1, A to W, W+1 to W+84 Antenna 75-ohm antenna terminal for VHF/UHF Audio characteristics Frequency response DVD VIDEO (PCM 96 kHz): 2 Hz to 44 kHz (1.0 dB)/DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(0.5 dB)/CD: 2 Hz to 20 kHz (0.5 dB) Signal-to-noise ratio (S/N ratio) 115 dB (LINE OUT (L/R) AUDIO jacks only) Harmonic distortion 0.003 %
Dynamic range DVD VIDEO: 103 dB/CD: 99 dB Wow and flutter Less than detected value (0.001% W PEAK) The signals from LINE OUT L/R (AUDIO) jacks are measured. When you play PCM sound tracks with a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL or COAXIAL) jack are converted to 48 kHz sampling frequency. Inputs and outputs LINE IN 1 and LINE-2 IN VIDEO IN, phono jack (1 each) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jacks (2 each) Input level: 327 mVrms Input impedance: more than 47 kilohms LINE OUT VIDEO OUT, phono jack (1) Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO OUT, phono jacks (2) Standard output: 327 mVrms Load impedance: 47 kilohms Output impedance: less than 10 kilohms DIGITAL OUT OPTICAL, Optical output jack 18 dBm (wave length: 660 nm) COAXIAL, phono jack Output signal: 0.5 Vp-p, 75 ohms COMPONENT VIDEO OUT (Y, Pb, Pr) Phono jack Y: 1.0 Vp-p/Pb, Pr: 0.7 Vp-p, 75 ohms S-VIDEO OUT 4-pin, mini-DIN jack Y: 1.0 Vp-p, unbalanced, sync negative C: 0.286 Vp-p, load impedance 75 ohms Timer section Clock Quartz locked Timer indication 12-hour cycle Timer setting 8 programs (max.) A d d i t i o n a l I n f o r m a t i o n continued Specifications 101 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 102 Saturday, March 15, 2003 4:29 PM General Power requirements 120 V AC, 60 Hz Power consumption 28 W Operating temperature 0C to 45C (32F to 113F) Storage temperature 20C to 60C (4F to 140F) Operating humidity 25% to 80%
Dimensions including projecting parts and controls
(w/h/d) Approx. 430 95 295 mm
(Approx. 17 3.7 12 inches) Mass Approx. 4.0 kg (Approx. 8.8 lbs) Supplied accessories Remote commander (1) Size AA (R6) batteries (2) 75-ohm coaxial cable with F-type connectors (1) Audio/video cord (pinplug 3 y pinplug 3) (1) Design and specifications are subject to change without notice. 102 Specifications filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 103 Saturday, March 15, 2003 4:29 PM Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel A ?/1 POWER switch (12) (36) B Disc tray (30) C A (open/close) button (30) (31) D Tape compartment (38) E A (eject) button (36) F LINE-2 IN VIDEO/AUDIO L/R jacks
(89) G SELECT DVD/VIDEO (11) H CHANNEL +/ buttons (38) I Remote sensor J Display window (31) (36) K z REC (record) button (39) L m (rewind)/M (fast-forward) button
(31) (36) M x (stop) button (31) (36) N X (pause) button (31) (36) O H (play) button (31) (36) P PROGRESSIVE button/indicator (49)
(55) A d d i t i o n a l I n f o r m a t i o n continued Index to parts and controls 103 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 104 Saturday, March 15, 2003 4:29 PM Display window A DVD indicator (31) B Disc indicator (31) C Tape indicator (36) D VCR indicator (36) E Timer indicator (42) F Record indicator (39) G STEREO indicator (84) H Playing time/clock/current status indicator (31) I SURR (surround) indicator (72) J DTS indicator (51) 104 Index to parts and controls filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010ADDI.fm Page 105 Monday, March 17, 2003 6:32 PM Rear panel DVD player and VCR A RF OUT (TO TV) connector (16) DVD player only F LINE OUT AUDIO L/R jacks (48) B RF IN (FROM ANT.) connector (16) G COMPONENT VIDEO OUT Pr/Pb/Y C LINE OUT VIDEO/AUDIO L/R jacks
(15) jacks (49) H S-VIDEO OUT jack (48) D LINE IN 1 VIDEO/AUDIO L/R jacks I DIGITAL AUDIO OUT/OPTICAL jack
(15)
(47) E AC power cord (14) (17) (19) J DIGITAL AUDIO OUT/COAXIAL jack
(47) A d d i t i o n a l I n f o r m a t i o n continued Index to parts and controls 105 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 106 Saturday, March 15, 2003 4:29 PM Remote commander A TV / DVDVIDEO switch (11) B Z button (30) (31) (36)
[for DVD] (open/close) button
[for VIDEO] (eject) button C SELECT DVD/VIDEO buttons (11) D Number buttons* (29) E CLEAR button (37) (42) (66) F SURROUND button (72) G SET UP button (21) H SUBTITLE/TIMER button (41) (64)
[for DVD] SUBTITLE button
[for VIDEO] TIMER button I AUDIO button* (71) (84) J BOOKMARK/SEARCH MENU button
(69) (85)
[for DVD] BOOKMARK button
[for VIDEO] SEARCH MENU button K REPEAT/REPLAY button (36) (66)
[for DVD] REPEAT button
[for VIDEO] REPLAY button L C SKIP button (31) (37)
[for VIDEO] SKIP button M z REC (record) button (39) N H PLAY button* (31) (36) O V/v/B/b button (21) P DISPLAY button (33) (39) Q TOP MENU button (61) Number 5, AUDIO and H PLAY buttons have a tactile dot. Use the tactile dot as a reference when operating the DVD-VCR. 106 Index to parts and controls filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 107 Saturday, March 15, 2003 4:29 PM R ?/1 (power) switch (12) (36) S CH (channel)/TRACKING +/ buttons*1
(38) (87) T VOL (volume) +/ buttons (12) U ENTER button*2 (21) V MUTING/ZOOM button (12) (62)
[for DVD] ZOOM button
[for VIDEO] No function
[for Sony TV only] MUTING button W SP (Standard Play)/EP (Extended Play) button (39) X TV/VIDEO button (40) Y ANGLE button (63) Z INPUT SELECT button (40) wj m/M SCAN/SLOW y buttons (31)
(36)
[for DVD] m SCAN button M SCAN button SLOW y button
[for VIDEO] m (rewind) button M (fast-forward) button SLOW y button wk ./> SHUTTLE PREV/NEXT button (31) (37)
[for DVD] .PREV (previous) button
> NEXT (next) button
[for VIDEO] ./> SHUTTLE button wl X PAUSE button (31) (36) e; x STOP button (31) (36) ea ENTER button*2 (21) es O RETURN button (21) ed MENU button (61)
*1 CH/TRACKING + button has a tactile dot. Use the tactile dot as a reference.
*2 The ENTER buttons 21 and 31 can be used interchangeably. A d d i t i o n a l I n f o r m a t i o n Index to parts and controls 107 filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[H:\2003combo\3083945111-0228\3083945111SLVD300PUC\010ADDI.fm]
010COV.book Page 108 Saturday, March 15, 2003 9:05 PM DVD Audio/Subtitle Language Abbreviation Language ARA CHI CRO CZK DAN DEU ENG ESP FIN FRA GRE HUN IDN IND ISL ITA IWR JPN KOR MAL NLD NOR POL POR RUS SVE THA TUR VIE ZAF Arabic Chinese Croatian Czech Danish German English Spanish Finish French Greek Hungarian Indonesian Hindi Islandic Italian Hebrew Japanese Korean Malay Dutch Norwegian Polish Portuguese Russian Swedish Thai Turquish Vietnamese Afrikaans 108 DVD Audio/Subtitle Language filename[010ADDI.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010COVIX.fm]
010COV.book Page 109 Saturday, March 15, 2003 4:29 PM S Safety tab 40 SAP (Second Audio Program) 84 Searching at various speeds 31, 36 for a blank portion 86 for the counter 0 point 86 Scan and Play 85 Shuffle play 67 SP mode 39 STEREO 71 Stereo 84 Subtitle 64 T Timer setting daily/weekly recording 43 Tracking adjustment. see Adjusting U Usable discs 8 V VIDEO CD 8 Z Zoom 62 Index Numerics 16:9 54 4:3 Letter Box 54 4:3 Pan Scan 54 A Adjusting picture 87 tracking 87 Angle 63 Antenna hookup 16 Audio track 84 Audio/video (A/V) hookup 15 Auto Clock Set 22 B Bookmark 69 C Cable hookup 14 Changing menu option 88 Cleaning the video heads 97 Clock setting 22 Commercial Skip 36 Connecting Cable TV 20 external antenna connector 93 UHF/VHF band mixer 93 Counter 37 D DATA CD 8, 74, 78 Disabling channels 28 DOLBY DIGITAL 46, 71 DTS 47, 71 Dubbing. see Editing DVD 8 E Editing 89 EP mode 39 H Handling discs 9 Hi-fi audio track 84 J JPEG 8, 78 L Language selecting 21 LP mode 40 M Monaural 84 Monitoring audio during playback 84 MP3 8, 74 N Normal audio track 84 P Palyback MP3 audio track 74 Parental Control 58 PBC (Playback control) 81 Picture adjustment 87 Playback 30 at various speeds 31, 36 frame by frame 31, 37 program play 65 repeat play 68 selecting the sound 84 shuffle play 67 skip 36 slow motion 32, 37 VIDEO CDs 81 Presetting channels 26 Program play 65 Progressive 49, 100 R Recording bilingual programs 84 SAP broadcasts 84 saving 40 stereo broadcasts 84 while watching another program 40, 43 Repeat play 68 RF channel 92 Index 109 filename[010COVIX.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
010COV.book Page 110 Saturday, March 15, 2003 4:29 PM filename[010COVIX.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
010COV.book Page 111 Saturday, March 15, 2003 4:29 PM filename[010COVIX.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
filename[Z:\2003combo\3083945111-0228\3083945111SLVD300PUC\010BCO.fm]
010COV.book Page 112 Saturday, March 15, 2003 4:29 PM Sony Corporation Printed in China AK68-00158A filename[010BCO.fm] model name1[SLV-D300P] [3-083-945-11 (1) US]
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-03-21 | 67.25 ~ 71.75 | HID - Part 15 TV Interface Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-03-21
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, NJ
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
DIVA2BD
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C********
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R******** O********
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | HID - Part 15 TV Interface Device | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DVD Player/Video Cassette Recorder | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Samsung Electronics Co., Ltd.
|
||||
1 | Name |
T****** S****
|
||||
1 | Telephone Number |
82-33********
|
||||
1 | Fax Number |
82-33********
|
||||
1 |
@******@.
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CE | 61.25 | 65.75 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15B | 67.25 | 71.75 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC