FCC ID: A3LMXT40 Giga Party Audio

USER MANUAL MX-T40 SAFETY INFORMATION SAFETY WARNINGS WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Refer to the table below for an explanation of CAUTION symbols which may be on your Samsung product. Do not expose this apparatus to dripping or CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A):

FCC Suppliers Declaration of Conformity Responsible Party - U.S. Contact Information:

Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864) AC voltage : Rated voltage marked with this symbol is AC voltage. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two FCC Compliance Statement :

DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use :

This symbol instructs the user to consult the user manual for further safety related information. conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENG - ii FCC Caution :

FCC Radiation Exposure Statement :

Any changes or modifications not expressly This equipment complies with FCC radiation approved by the party responsible for exposure limits set forth for an uncontrolled compliance could void the users authority to environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) This product satisfies FCC regulations when between the radiator and your body. This device shielded cables and connectors are used to and its antenna(s) must not be co-located or connect the unit to other equipment. operated in conjunction with any other antenna or To prevent electromagnetic interference with transmitter. electric appliances, such as radios and televisions, use shielded cables and CALIFORNIA USA ONLY (Applicable for connectors for connections. networking models only.) Class B FCC Statement This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the This equipment has been tested and found to product sold or distributed ONLY in California comply with the limits for a Class B digital device, USA Perchloate Material - special handling may pursuant to Part 15 of the FCC Rules. These limits apply, See www.dtsc.ca.gov/hazardouswaste/

are designed to provide reasonable protection against harmful interference in a residential perchlorate. installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/

recycling Or call, 1800SAMSUNG WARNING: Cancer and Reproductive Harm

- www.P65Warnings.ca.gov. cause harmful interference to radio or television Important Safety Instructions reception, which can be determined by turning Read these operating instructions carefully the equipment off and on, the user is encouraged before using the unit. Follow all the safety to try to correct the interference by one of the instructions listed below. Keep these operating following measures:

Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. Connecting the equipment to an outlet that is 5. Do not use this apparatus near water. on a different circuit than the radio or TV. 6. Clean only with dry cloth. Consulting the dealer or an experienced 7. Do not block any ventilation openings. radio/TV technician for help. Install in accordance with the manufacturers instructions. ENG - iii 11. Only use attachments/accessories specified 3. Do not expose the unit to direct sunlight or 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the rear of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. ENG - iv ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.

(https://www.samsung.com/us/support/downloads/) Design and specifications are subject to change without prior notice. ENG - v Inserting Batteries before using the Remote Control

(AAA batteries X 2)

------------------------- 2 CONTENTS 01 Checking the Components 02 Product Overview Top Panel of the Party Audio Rear Panel of the Party Audio 03 Connecting the Party Audio Connecting Electrical Power How to use Audio Group 04 Connecting an External Device Connecting using an Analog Audio (AUX) Cable Connecting a mobile device via Bluetooth

------------------------- 11

------------------------- 12 05 Connecting a USB Storage Device Software Update

------------------------- 15 06 Using the Remote Control How to Use the Remote Control

------------------------- 16

------------------------- 3

------------------------- 4

------------------------- 5

------------------------- 6 2 3 5 11 15 16 ENG - vi 07 Troubleshooting 08 License 09 Open Source License Notice 10 Important Notes About Service 11 Specifications and Guide 18 19 19 19 20 Specifications

------------------------- 20 ENG - vii 01 CHECKING THE COMPONENTS Party Audio Main Unit Remote Control (AH81-11472A) /

Batteries Power Cord

(AH81-11474A) For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Party Audio Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or When moving the product, do not drag or pull the product from the ground. Lift the product when Samsung Customer Care. moving the product. Inserting Batteries before using the Remote Control

(AAA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. ENG - 2 02 PRODUCT OVERVIEW Top Panel of the Party Audio

BASS

 Remote Sensor

 Display Window

When operating the Party Audio system, please aim the front of the remote control at the remote sensor. Displays operating messages or current status of the Party Audio system. Power Turns the Party Audio on and off. Light Press the

(Light) button to turn the Lighting Mode on.

 Source Press to select a source connected to the Party Audio. Press and hold the PAIRING mode.

(Source) button for more than 5 seconds to enter the BT Play/Pause Press the button to pause a music file temporarily. When you press the button again, the music file plays.

 Play/Pause Demo play Press and hold the button for more than 5 seconds to start the Demo play while the system is turned on. DEMO appears on the display and it plays demo music for 60seconds.

 Volume down

 Volume up

Press the

(Volume down) button to lower the volume. Press the

(Volume up) button to raise the volume. BASS Press the BASS button to use the powerful bass sound. ENG - 3 Rear Panel of the Party Audio

 Bluetooth PAIRING

 ADD STEREO

 GROUP PLAY

GROUP PLAY OUT Terminals AUX2/GROUP PLAY IN Terminals AUX1 Power Press the PAIRING button to enter the BT PAIRING mode. Press the ADD STEREO button to connect to another Party Audio wirelessly. Press the GROUP PLAY button to connect up to ten Party Audio systems wirelessly. USB Connect a USB device to the USB port on the main unit. Press the

(Source) button to select USB. Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main unit to Audio In on an external analog output device. Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to Audio Out on an external analog output device. Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio Out on an external device. Connect the power cord to the Power jack and connect the other end of the power cord to a wall socket to supply electrical power to the Party Audio. ENG - 4 03 CONNECTING THE PARTY AUDIO Connecting Electrical Power Use the power cord to connect the Party Audio to an electrical outlet in the following order:

Connect the power cord to the Party Audio and then to a wall socket. See the illustrations below. For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Party Audio) Rear of Party Audio Connecting Electrical Power ENG - 5 How to use Audio Group You can connect multiple audio systems in a group to create a party environment and produce higher sound output. Set one Party Audio as the host and any music played on it will be shared among any other Party Audio systems in the Audio group. Connecting the wired Group Play mode Continue the connection until the last Party Audio 1st 2nd Party Audio Host Party Audio Last Party Audio Set up Group Play by connecting all the systems using audio cables (not supplied). Use the AUX or

(Source) button to change the source to AUX2 for every Party Audio system except the 1st (or host) Party Audio system. NOTES distance. The 1st Party Audio Host can play music from any source. Depending on the length or characteristics of the cable, there may be a difference in operating ENG - 6 Connecting the wireless Group Play mode You can connect up to ten Party Audio systems with the wireless Group Play function. GROUP PLAY GROUP PLAY

GROUP PLAY

Slave 1 Slave 2 Host stops blinking. blinking. NOTES quality. 1. Press the GROUP PLAY button on the Host Party Audio system. The HOST message appears on the display of the host Party Audio and the LED blinks on the GROUP PLAY button. 2. Press the GROUP PLAY button on the 2nd Party Audio system (Slave 1). The GROUP PLAY CONNECTED message appears on the display and the GROUP PLAY button on both systems 3. Press the GROUP PLAY button on the 3rd Party Audio system (Slave 2). The GROUP PLAY CONNECTED message appears on the display and the GROUP PLAY button on the system stops 4. If you want to add more Party Audio systems, repeat step 3. 5. Play music on the Host Party Audio. Sound outputs from all the connected systems. The wireless Group Play connection is available for any Party Audio system. Environmental conditions or other factors with connected devices may have effect on playback If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play The ADD STEREO button and PAIRING button on the slave Party Audio systems are not available The ADD STEREO button on the host Party Audio system is not available while in wireless Group connection. Try step 1 to step 5 again. while in wireless Group Play mode. Play mode. When adding a slave unit, if you press and hold GROUP PLAY on the slave, before the GROUP PLAY CONNECTED message appears, it will become the Host unit instead. ENG - 7 All slave units must be connected one by one. For example, after Host is connected, press GROUP PLAY button on slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth slave 3 one by one sequentially. connection is disabled. Bluetooth devices can search and connect with the host Party Audio only. When in Group Play mode, the slaves cannot connect to a Bluetooth device. If you power off and then power on the Party Audio or select any source other than BT on a slave unit, in Group Play mode, the Group Play mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (Host or Slaves) after Group Play is connected or press the GROUP PLAY button (Host or Slaves) before Group Play is connected. OFF-GROUP PLAY appears on the display and the LED above the GROUP PLAY button is off. 2. If you select any source other than BT on the slave units or turn off the host Party Audio, the Group Play mode is disconnected. If the disconnection is made from the host Party Audio, Group Play is disconnected. LED Indications Green Red NOTE LED STATE Description Blink Solid Solid Waiting for a wireless Group Play connection. The wireless Group Play connection was successful. There is an error with the wireless Group Play connection. In wireless connection, Playback quality can be unstable depending on Bluetooth environment. For better play, please keep the device in wired Group Play mode. ENG - 8 Using the Stereo Group mode You can enjoy stereo sound by connecting two Party Audio systems.

ADD STEREO ADD STEREO

Left Party Audio Right Party Audio

(Master)

(Slave) 1. Press the ADD STEREO button on the left Party Audio system. The ADD STEREO message appears on the display and the LED blinks on the ADD STEREO button. 2. Press the ADD STEREO button on the right Party Audio system. The ADD STEREO message appears on the display and the LED blinks on the ADD STEREO button. 3. When the connection is made, The BT PAIRING message appears on the master Party Audio system and STEREO MODE appears on the slave Party Audio system. The master Party Audio system outputs left channel sound and the slave Party Audio system outputs right channel sound. If you want to change the sound channels of Party Audio systems, press the ADD STEREO button on the current master Party Audio system. 4. Play music on the Party Audio. Sound outputs from both Party Audio systems. NOTES quality. 1 and step 4 again. mode. To use the Stereo Group mode, both Party Audio systems must be the same model. Environmental conditions or other factors with connected devices may have effect on playback If the red LED is on the ADD STEREO, an error has occured in the Stereo Group connection. Try step All the buttons except ADD STEREO button and Power on the slave Party Audio systems are disabled while in Stereo Group mode. The GROUP PLAY button on the host Party Audio system is not available while in Stereo Group ENG - 9 While in Stereo Group mode, currently connected Bluetooth devices are disconnected and If you select any source other than BT or power cycle the master Party Audio, the Stereo Group Bluetooth connection is disabled. mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode may fail. Disconnecting the Stereo Group mode 1. Press and hold the ADD STEREO button over 5 seconds (Master or Slave) after Stereo Group is connected or press the ADD STEREO button (Master or Slave) before Stereo Group is connected. OFF-ADD STEREO appears on the display and the LED above the ADD STEREO button is off. 2. If you select any source other than BT on the slave units or the master Party Audio is turned off and then back on, the Stereo Group mode is disconnected. If one of the Party Audio is disconnected from Stereo Group mode, another Party Audio is automatically disconnected. LED Indications LED STATE Description Green Red Blink Solid Solid Waiting for a Stereo Group connection. The Stereo Group connection is successful. There is an error with the Stereo Group connection. ENG - 10 04 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external devices sound through the Party Audio. Connecting using an Analog Audio (AUX) Cable Mobile device / MP3 / PMP 0.14 inches (3.5 mm) stereo cable (not supplied)

Rear of the Party Audio

Audio (AUX) Cable (not supplied) R

- AUDIO -

L BD / DVD player / Set-top box / Game console

 0.14 inches (3.5 mm) stereo Cable (AUX1) 1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an 0.14 inches (3.5 mm) stereo cable . 2. Select AUX1 mode by pressing the

(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control.

 Audio Cable (AUX2) 1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device 2. Select AUX2 mode by pressing the

(Source) button on the top panel or on the remote using an audio cable . control. You can also select a source using AUX button on the remote control. ENG - 11 Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. PAIRING ADD STEREO GROUP PLAY OR LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP Bluetooth device The initial connection BT PAIRING mode. 1. Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the

(OR) Press the PAIRING button on the rear panel or press and hold the

(Source) button on the top panel for more than 5 seconds to enter the BT PAIRING mode. 2. On your device, select [AV] Samsung Party T40 from the list that appears. When the Party Audio is connected to the Bluetooth device, [Bluetooth Device Name] BT appears in the front display. 3. Play music files from the device connected via Bluetooth through the Party Audio. If a previously connected Party Audio listing (e.g. [AV] Samsung Party T40) appears in the list, If the device fails to connect delete it. Then repeat steps 1 and 2. What is the difference between BT READY and BT PAIRING?

BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Party Audio. BT PAIRING : In this mode, you can connect a new device to the Party Audio.

(Press and hold the PAIRING button on the remote control or the

(Source) button on top of the Party Audio for more than 5 seconds to enter the BT PAIRING mode.) You can also press the PAIRING button on the rear of the Party Audio to enter the BT PAIRING mode. ENG - 12 Bluetooth Multi connection The Party Audio can be connected to 2 Bluetooth devices at the same time. Bluetooth device 1 Bluetooth device 2 1. Connect the Party Audio to up to two Bluetooth devices. (See page 12) 2. If you attempt to connect a 3rd Bluetooth device, the 1st and 2nd devices will disconnect. 3. Play music from one of the connected Bluetooth devices while two devices are connected. The other device will automatically pause. Depending on the device, and the content being played, playback may not be able to be automatically paused when switching from device to device. NOTES quality. circumstances:

You can connect up to two Bluetooth devices at a time. If asked for a PIN code when connecting a Bluetooth device, enter <0000>. Environmental conditions or other factors with connected devices may have effect on playback The Party Audio automatically turns off after 20 minutes with no command input in the ready state. The Party Audio may not perform Bluetooth search or connection correctly under the following If there is a strong electrical field around the Party Audio. If several Bluetooth devices are simultaneously paired with the Party Audio. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Party Audio main unit - e.g., microwaves, wireless LAN devices, etc. When the Party Audio is connected to your TV by Bluetooth connection, the video on the TV and audio from the Party Audio may not be synchronized because the distance between the Party Audio and the TV is too far. It is recommended to move the Party Audio closer to your TV within 3.3 ft (1 meter). When the speaker is in the Bluetooth Multi connection mode, you will need to connect the other Bluetooth device and speaker within a few minutes (Approx. 1 minute). Otherwise Bluetooth Multi connection mode will be canceled. ENG - 13 Bluetooth Multi connection may not be supported depending on the connected devices Removable/detachable Bluetooth devices (Ex:Dongle etc..) ,windows phone, laptops, TV, etc. do not After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing specifications. support Bluetooth Multi connection. depending on the Bluetooth devices. If you move too far out of range from the Party Audio without first disconnecting your Bluetooth device, it may take a few minutes to connect other Bluetooth devices. If you turn the Party Audio off and back on, you can connect other Bluetooth devices without waiting. LED Indications LED STATE Description Fast Blink BT PAIRING mode Blue BT READY mode Blink Solid A Bluetooth device is connected. Using Bluetooth Power On When the Party Audio is turned off, you can connect your smart device via a Bluetooth connection to turn it on. NOTE 1. Press and hold the BASS button on the remote control or on the top panel to set the Bluetooth Power On function on. ON-BLUETOOTH POWER appears on the display. 2. When the Party Audio is off, connect your smart device via Bluetooth. (For information on Bluetooth connections, refer to your smart devices manual.) 3. When the connection is complete, the Party Audio turns itself on automatically in Bluetooth mode. Select the desired music to play from your smart device. Press and hold the BASS button for more than 5 seconds on the remote control or on the top panel to turn the Bluetooth Power On function on or off. Each time you press the BASS button, the Party Audio displays :

ON-BLUETOOTH POWER OFF-BLUETOOTH POWER ENG - 14 05 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage device through the Party Audio. Rear of the Party Audio USB storage device

(not supplied) 1. Connect a USB storage device to the USB jack on your Party Audio. 2. Press the

(Source) button on the top panel or on the remote control, and then select USB. You can also select a source using USB button on the remote control. 3. USB appears in the display screen. 4. Play music files from the USB storage device through the Party Audio. The Party Audio automatically turns off (Auto Power Down) if USB device is not connected, playback stopped, or there is no input for more than 20 minutes. Software Update Samsung may offer updates for the Party Audios system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Party Audio. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.com/us/support/. Then, enter or select the model number of your Party Audio, select the Software & Apps option, and then Downloads. Note that the option names can vary. ENG - 15 06 USING THE REMOTE CONTROL How to Use the Remote Control

USB AUX TEMPO EFFECT DJ EFFECT LIGHT PAIRING SOUND MODE DOWN BASS

LIGHT Turn the Party Audio on and off. Power USB AUX PAIRING

SOUND MODE LIGHT LIGHT EFFECT DJ PAIRING EFFECT

SOUND MODE DOWN UP EFFECT Source AUX USB LIGHT

TEMPO PAIRING DOWN Bluetooth SOUND MODE PAIRING EFFECT TEMPO

(LIGHT) button to turn the Press the Lighting Mode on. Press the button repeatedly to cycle through the available light modes: AMBIENT, PARTY, DANCE, THUNDERBOLT, STAR or OFF. AUX USB TEMPO Press to select a source connected to the Party Audio. Press the button repeatedly to cycle through the available sources: BT, USB, AUX1 or AUX2 . EFFECT DJ Press to select a source connected directly to USB

"BT" mode. AUX UP Press and hold the button for more than 5 seconds to enter the "BT PAIRING" mode. TEMPO

PAIRING SOUND MODE

EFFECT LIGHT PAIRING EFFECT DJ LIGHT

DOWN UP PAIRING SOUND MODE

USB EFFECT AUX DJ AUX TEMPO USB SOUND MODE AUX EFFECT USB BASS EFFECT Press to select the USB source connected to DJ the Party Audio. AUX USB DOWN TEMPO UP Press to select the AUX1 or AUX2 sources connected to the Party Audio. BASS TEMPO Press the button repeatedly to cycle through the available sound effects: PARTY, STANDARD, HIPHOP, EDM, ROCK, LATIN, HOUSE or REGGAE. EFFECT EFFECT DOWN UP DJ EFFECT DOWN BASS Press the TEMPO + or TEMPO - buttons to change the tempo of the music up or down. This function only works in the USB mode. UP PAIRING SOUND MODE EFFECT TEMPO USB SOUND MODE AUX

LIGHT PAIRING SOUND MODE EFFECT DJ DOWN TEMPO +, -

EFFECT UP DOWN UP DJ BASS BASS BASS ENG - 16 UP LIGHT LIGHT BASS LIGHT PAIRING LIGHT SOUND MODE USB AUX TEMPO USB AUX AUX USB LIGHT PAIRING PAIRING

EFFECT SOUND MODE EFFECT PAIRING SOUND MODE DJ SOUND MODE EFFECT DJ DOWN USB DJ TEMPO EFFECT USB TEMPO AUX This function lets you turn on the DJ effect function. Press the button repeatedly to cycle through the available DJ sound effects:

NOISE, FILTER, CRUSH, CHORUS, WAHWAH or OFF. TEMPO UP EFFECT DJ AUX EFFECT Press the EFFECT + or EFFECT - buttons to change the level of the each DJ sound effect up or down. UP Press the

(DOWN) button to move to the next folder in the USB device. Press the

(UP) button to move to the previous folder in the USB device.

(Volume up) or

(Volume down) to adjust the volume level up or button to select the next music file. Press the button to select the LIGHT LIGHT PAIRING EFFECT EFFECT +, -

DJ EFFECT SOUND MODE DOWN

TEMPO DOWN UP DOWN UP EFFECT DJ Folder DOWN EFFECT DOWN LIGHT UP BASS Folder UP USB AUX PAIRING Volume up, Volume down BASS SOUND MODE BASS TEMPO Press the down. USB BASS AUX Music Skip EFFECT Press the previous music file. AUX EFFECT USB TEMPO Volume up, DJ Volume down /

TEMPO UP LIGHT PAIRING SOUND MODE EFFECT PAIRING BASS SOUND MODE DJ

EFFECT Skip DOWN EFFECT DJ UP DOWN Play / Pause DOWN UP

button to pause a music file temporarily. Press the When you press the button again, the music file plays. EFFECT Press the Press it again to unmute the sound.

(Mute) button to mute the sound. Mute BASS Repeat BASS BASS BASS

(Repeat) button to use the Repeat function in USB mode. Press the Press the button repeatedly to cycle through the available repeat functions:

ONE, FOLDER, ALL, RANDOM or OFF. Press the BASS button to use the powerful bass sound. ENG - 17 07 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. Is the power cord plugged into the outlet?

; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air?

; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode.

; See the Bluetooth connection sections on page 12. Sound is not produced. Is the Mute function on?

; Press the

(Mute) button to cancel the mute function. Is the volume set to minimum?

; Adjust the Volume. The remote control does not work. Are the batteries drained?

; Replace them with new batteries. Is the distance between the remote control and Party Audio main unit too far?

; Move the remote control closer to the Party Audio main unit. Stereo Group connection is not working. Is the system in wireless Group Play mode?

; Disconnect the wireless Group Play mode and try Stereo Group connection again. It cannot make a Bluetooth connection. Is the system connected to another system in wireless Group Play mode or Stereo Group mode?

; Try Bluetooth connection again after disconnecting the wireless Group Play or Stereo Group connection. Are the two Bluetooth devices already connected?

; Try Bluetooth connection again after disconnecting other Bluetooth connections. The PAIRING button is not working. Is the system in wireless Group Play mode or Stereo Group mode?

; Try again after disconnecting the wireless Group Play or Stereo Group connection. I want to switch the host system to the other in wireless Group Play or Stereo Group connection.

; Disconnect Group Play mode, press the Speaker which you want make to host first, and after it displays HOST message, connect the others one by one.

; With Stereo Group mode, host is fixed. You can not change others as host. I want to play AUX1 or AUX2 more than 8 hours without control input.

; Press and hold the button for more than 5 seconds in AUX1 or AUX2 mode to disable Auto Power Down Function. Change from ON-AUTO POWER DOWN to OFF-AUTO POWER DOWN. ENG - 18 I cant connect a slave to Group play.

; After 1 hour, the host will block any additional slaves from being added. Press the GROUP PLAY button on host, after it display HOST message, the slave can be reconnected. It cannot make a Wireless/Wired Group/Add Stereo/Bluetooth connection. Is the distance between systems too far?

; It is recommended to make a Wireless/

Wired Group/Add Stereo/Bluetooth pairing within 3.3 ft (1 meter) from the system.

; The recommended operating distance between Party Audio systems is closer than 32.8 ft (10 meters). 09 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email

(oss.request@samsung.com). 10 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:

a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair. 08 LICENSE The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. ENG - 19 11 SPECIFICATIONS AND GUIDE Specifications Model Name USB Weight Dimensions (W x H x D) MX-T40 5V/0.5A 15.0 lbs (6.8 kg) 11.5 x 20.9 x 10.6 inches

(291.5 x 530.5 x 268 mm) 10 % ~ 75 %

50W x 2, 8 ohm 100W x 2, 4 ohm Operating Temperature Range

+41F to +95F (+5C to +35C) Operating Humidity Range AMPLIFIER Rated Output power Tweeter Woofer NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. ENG - 20 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) Year Parts and Labor*

(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;

cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:

http://www.samsung.com/us/peaceofmind/authorized_resellers.html. Certi cation model only QUESTIONS OR COMMENTS?

AREA CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG

(726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridge eld Park, NJ 07660 2020 Samsung Electronics Co., Ltd. All rights reserved. 72-WT40ZA-DFUB1-SS

80.5mm MODEL / MODELE NO. : MX-T40 MODEL CODE : MX-T40/ZA AC100-240V~ 50/60Hz 35W 23.5mm MFD. / FABRIQUE:FEBRUARY 2020 S/N:CX1714PN200001V Model :

MX-T40 Model Code :

MX-T40/ZA FCC ID:A3LMXT40 MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ) TSCA Title VI compliant S/N:CX1714PN200001 8 8 7 2 7 6 4 1 7 6 4 6 MADE IN CHINA(Factory ID: TQ) FABRIQUE AU CHINE(Factory ID: TQ) HECHO EN CHINA(Factory ID: TQ) Label location

Samsung Electronics Co Ltd. Agent Authorization Company: Samsung Electronics Co Ltd. Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Product Name: Giga Party Audio Model Number(s): MX-T40, MX-T40/** , MX-T40*** ("*" represents any alphanumeric character or blank) Product Description: Giga Party Audio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2020/04/01 Name:

Jenni Chun Company: Samsung Electronics Co Ltd.

Samsung Electronics Co Ltd Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058 Confirmation Letter We, Samsung Electronics Co Ltd The product: Giga Party Audio And model No.: MX-T40 FCC ID: A3LMXT40 MX-T40/**, MX-T40*** ("*" represents any alphanumeric character or blank) have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with MX-

T40.The difference lies only model number and marketing purpose . ______________________ Contact personJenni Chun Date04/01/2020