| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual | Users Manual | 1014.21 KiB | ||||
| 1 | Cover Letter(s) | |||||||
| 1 | Cover Letter(s) | |||||||
| 1 | ID Label/Location Info | |||||||
| 1 | External Photos | |||||||
| 1 | Internal Photos | |||||||
| 1 | Test Setup Photos | |||||||
| 1 | Test Report |
| 1 | User Manual | Users Manual | 1014.21 KiB |
FCC ID : A3LSLS-2A30002100 ATTACHMENT E.
- USER MANUAL -
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr HCT CO., LTD. 1/1 Ed. 00 MetroPCS User Manual COPYRIGHT This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright. No information contained herein may be copied, translated, transcribed or duplicated for any commercial purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics Co., Ltd. TRADEMARKS Product names mentioned in this manual may be trademarks and/or registered trademarks of their respective companies. This manual should be read and used as a guideline for properly installing and operating the product. This manual may be changed for the system improvement, standardization and other technical reasons without prior notice. If you need updated manuals or have any questions concerning the contents of the manuals, contact our Document Center at the following address or Web site:
Address: Document Center 3rd Floor Jeong-bo-tong-sin-dong. Dong-Suwon P.O. Box 105, 416, Maetan-3dong Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 442-600 Homepage: http://www.samsungdocs.com 2010 SAMSUNG Electronics Co., Ltd. All rights reserved. MetroPCS User Manual INTRODUCTION Purpose This document introduces evolved NodeB (eNB) system of the Samsung Electronics and describes its architecture and functions. Document Content and Organization This document consists of five Chapters, Abbreviation. CHAPTER 1. Overview of LTE Network Introduction to LTE Network Interface between Systems CHAPTER 2. Overview of LTE eNB Introduction to LTE eNB Main Functions Specifications CHAPTER 3. System Architecture Hardware Structure Software Structure CHAPTER 4. Message Flow Attach Procedure Service Request Procedure Detach Procedure Intra E-UTRAN Handover Procedure Network Synchronization Signal Flow SAMSUNG Electronics Co., Ltd. I INTRODUCTION Alarm and Reset Signal Flow Loading Flow Operation and Maintenance Signal Flow CHAPTER 5. Additional Functions and Tools Command Line Interface (CLI) ABBREVIATION Describes the acronyms used in this description. Revision History EDITION DATE OF ISSUE 00 01. 2011. REMARKS First Edition II SAMSUNG Electronics Co., Ltd. TABLE OF CONTENTS INTRODUCTION MetroPCS User Manual I Purpose I Document Content and Organization..................................................................................................... I Revision History..................................................................................................................................... II CHAPTER 1. Overview of LTE Network 1-1 1.1 1.2 Introduction to LTE network ................................................................................................. 1-1 Interface between Systems................................................................................................... 1-5 LTE Network Interface ..........................................................................................................1-5 1.2.1 1.2.2 Interface protocol ..................................................................................................................1-6 CHAPTER 2. Overview of LTE eNB 2-1 2.1 Introduction to LTE eNB........................................................................................................ 2-1 2.2 Main Functions ...................................................................................................................... 2-2 2.3 Specifications ........................................................................................................................ 2-4 CHAPTER 3. System Architecture 3-1 3.1 Hardware Structure................................................................................................................ 3-1 3.1.1 Digital Unit (L9DU)................................................................................................................3-2 3.1.2 Radio Unit .............................................................................................................................3-5 3.1.3 Cooling Architecture..............................................................................................................3-9 3.1.4 Environment Sensors .........................................................................................................3-10 3.2 Software Structure................................................................................................................3-11 3.2.1 Operating System (OS) ...................................................................................................... 3-11 3.2.2 Network Processing Software (NP SW)............................................................................. 3-11 3.2.3 Device Driver (DD)..............................................................................................................3-12 3.2.4 Middleware (MW)................................................................................................................3-12 3.2.5 IP Routing Subsystem (IPRS)............................................................................................3-12 3.2.6 Call Processing Software (CPS) ........................................................................................3-12 3.2.7 Operation and Maintenance (OAM) ...................................................................................3-14 SAMSUNG Electronics Co., Ltd. III TABLE OF CONTENTS CHAPTER 4. Message Flow 4-1 4.1 Attach Procedure....................................................................................................................4-1 4.2 Service Request Procedure...................................................................................................4-5 4.3 Detach Procedure...................................................................................................................4-9 4.4 Intra E-UTRAN Handover Procedure ..................................................................................4-12 4.5 Network Synchronization Signal Flow................................................................................4-18 4.6 Alarm and Reset Signal Flow ..............................................................................................4-19 4.7 Loading Flow ........................................................................................................................4-20 4.8 Operation and Maintenance Signal Flow............................................................................4-21 CHAPTER 5. Additional Functions and Tools 5-1 ABBREVIATION
! . A ~ D E ~ L M ~ R S ~ W
.................................................................................................................................................. I
................................................................................................................................................. II
................................................................................................................................................ III
................................................................................................................................................IV LIST OF FIGURES Figure 1.1 LTE Network Configuration ....................................................................................1-1 Figure 1.2 LTE Network Interface ...........................................................................................1-5 Figure 1.3 User plane protocol stack between eNB and UE ...................................................1-6 Figure 1.4 Control plane protocol stack between eNB and UE ...............................................1-7 Figure 1.5 User plane protocol stack between eNB and S-GW ..............................................1-7 Figure 1.6 Control plane protocol stack between eNB and MME............................................1-8 Figure 1.7 User plane protocol stack between eNBs ..............................................................1-8 Figure 1.8 Control plane protocol stack between eNBs ..........................................................1-9 Figure 1.9 Protocol stack between eNB and LSM...................................................................1-9 Figure 1.10 Protocol stack between eNB and LSS ...............................................................1-10 Figure 3.1 Rack Configuration of Macro Outdoor Cabinet ......................................................3-1 Figure 3.2 Internal Configuration of Macro Outdoor Cabinet!
. Figure 3.3 RF Configuration for Antenna Sharing ...................................................................3-7 IV SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Figure 3.4 Configuration of FANs ........................................................................................... 3-9 Figure 3.5 Configuration of Environment Sensors................................................................ 3-10 Figure 3.6 Software Structure................................................................................................3-11 Figure 3.7 OAM Block .......................................................................................................... 3-14 Figure 4.1 Attach procedure................................................................................................... 4-2 Figure 4.2 UE triggered Service Request procedure.............................................................. 4-6 Figure 4.3 Network triggered Service Request procedure...................................................... 4-8 Figure 4.4 UE initiated Detach procedure............................................................................... 4-9 Figure 4.5 MME initiated Detach procedure ..........................................................................4-11 Figure 4.6 X2 based handover procedure ............................................................................ 4-12 Figure 4.7 S1 based handover procedure ............................................................................ 4-15 Figure 4.8 DU Synchronization Signal Flow ............... ! . Figure 4.9 RU Synchronization Signal Flow ............... ! . Figure 4.10 Alarm and Reset Signal Flow .................. ! . Figure 4.11 Loading Flow ........................................... ! . Figure 4.12 Operation/Maintenance Signal Flow........ ! . Figure 5.1 Connecting to the CLI............................................................................................ 5-1 SAMSUNG Electronics Co., Ltd. V TABLE OF CONTENTS This page is intentionally left blank. VI SAMSUNG Electronics Co., Ltd. MetroPCS User Manual CHAPTER 1. Overview of LTE Network 1.1 Introduction to LTE network 3GPP Long Term Evolution (LTE) network is composed of E-UTRAN NodeB (eNB), LTE System Manager (LSM) and Evolved Packet Core (EPC). LTE network is the subnet of Packet Data Network (PDN) and enables User Equipments (UE) to interwork with IP network. The following diagram shows the composition of 3GPP LTE network. Samsung Products Other Products CDMA Network BSC/PCF WSS WGW PDSN PSTN Packet Data Network EMS (1x Core) LSM-R
(LTE eNB) LTE eNB S-GW
/P-GW LSM-C (EPC) MME EPC Network Figure 1.1 LTE Network Configuration SAMSUNG Electronics Co., Ltd. 1-1 CHAPTER 1. Overview of LTE Network Evolved UTRAN Node-B (eNB) The eNB is located between the UE and EPC. It processes packet calls by connecting to the UE wirelessly according to the LTE Air standard. The eNB performs functionalities such as transmission and receipt of wireless signals, modulation and demodulation of packet traffic signals, packet scheduling for efficient utilization of wireless resources, Hybrid Automatic Repeat Request (HARQ)/ARQ processing, Packet Data Convergence Protocol (PDCP) for packet header compression, and wireless resources control. Moreover, it performs handover interoperating with the EPC. Evolved Packet Core (EPC) The EPC succeeds to the 3GPP Release 7 packet-switched core network and consists of Mobility Management Entity (MME), Serving GW (S-GW), and PDN GW (P-GW). The MME performs MS mobility management and session management, Mobile Station
(MS) authentication, and HO control. The MME also processes the control plane through interoperation between eNB and MME, UE and MME, Serving General Packet Radio Service (GPRS) Support Node (SGSN) and MME, MME and MME, MME and SGW, MME, Home Subscriber Server (HSS) and Equipment Identity Register (EIR). The S-
GW/P-GW processes the user plane. It processes routing and forwarding the user data between the UE and the PDN network. The P-GW performs the gateway function to the PDN network, interoperation with non-
3GPP network, and address allocation for the UE. Mobility Management Entity (MME) The MME processes the control functions for the control plane, such as call connection control and mobility management, tracking area list management, bearer and session management by processing NAS signaling with the MS and S1 Application Protocol (S1-
AP) signaling with the eNB. The control functions for the control plane that the MME processes are given below. Non Access Stratum (NAS) signaling NAS signaling security UE Reachability in ECM-IDLE state (including control and execution of paging Inter Core Network (CN) node signaling for mobility between 3GPP access networks retransmission) Tracking Area list management PDN GW and Serving GW selection MME selection for handovers with MME change SGSN selection for handovers to 2G or 3G/3GPP access networks Roaming (S6a towards home HSS) Authentication Bearer management functions including dedicated bearer establishment Lawful Interception 1-2 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Serving Gateway (S-GW) The S-GW performs the mobility anchor function within the LTE system and between LTE and 3GPP access system, and processes transmission of downlink/uplink packet data. The S-GW supports GPRS Tunneling Protocol (GTP) and Proxy Mobile IP (PMIP) protocols for signaling processing with MME, P-GW, and SGSN. PDN Gateway (P-GW) The P-GW allocates an IP address to UE and, for mobility between the LTE system and non-3GPP access system, provides the anchor function and the packet filtering function for each subscriber. In addition, it handles accounting and bearer policy in accordance with the policy interoperating with the Policy Charging & Rule Function (PCRF), and provides the accounting function, the transmission rate management and change functions that depend on the service level. LTE System Manager (LSM) The LSM provides the interface for the operator, and the software management, configuration management, performance management, and error management functions so that s/he can operate and maintain eNB/EPC. The LTE System Manager-Core (LSM-C) performs the operating management function for EPC (MME, S-GW, P-GW). The LTE System Manager-Radio (LSM-R) performs the operating management function for eNB, and also the SON server (LTE SON server, LSS) function. Home Subscriber Server (HSS) The HSS is a database management system that stores and manages the parameters and location information for all registered mobile subscribers. The HSS manages key data such as the mobile subscribers access capability, basic services and supplementary services, and provides a routing function to the subscribed receivers. Policy Charging & Rule Function (PCRF) The PCRF creates policy rules to dynamically apply the QoS and accounting policies differentiated by service flow, or creates the policy rules that can be applied commonly to multiple service flows. Since the IP edge contains the Policy and Charging Enforcement Function (PCEF), it can apply the policy rules transmitted from PCRF to each service flow. Authorization, Authentication and Accounting (AAA) The AAA is a system providing authentication and authorization functions to the packet data service subscribers. The AAA server also provides a billing function based on service usage. Charging Gateway Functionality (CGF) The accounting data generated from the PCEF is stored in the CGF and is provided for each subscriber. SAMSUNG Electronics Co., Ltd. 1-3 CHAPTER 1. Overview of LTE Network Online Charging System (OCS) When a subscriber for whom online information is required makes a call, the PCEF sends and receives his accounting information in interoperation with the OCS. Domain Name Service (DNS) The DNS manages mapping between domain names and IP addresses. When an MS requests, it notifies the IP address of the requested domain. Dynamic Host Configuration Protocol (DHCP) The DHCP server is an auxiliary device for providing packet services. It manages and assigns IP addresses. 1-4 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 1.2 Interface between Systems 1.2.1 LTE Network Interface The figure below shows LTE network interface. PCRF OCS CGF Gx Gy Gz LSS FTP/
SOAP LSM SNMP/FTP/SOAP SNMP/FTP/SOAP TL1/FTP UE UE Uu Uu eNB X2 eNB S1 S1 S6b S6a SGi DNS EPC socket DHCP AAA HSS LSM PDN Figure 1.2 LTE Network Interface AAA: Authentication, Authorization and Accounting DHCP: Dynamic Host Configuration Protocol eNB: E-UTRAN NodeB EPC: Evolved Packet Core OCS: Online Charging System PDN: Packet Data Network FTP: File Transfer Protocol SNMP: Simple Network Management Protocol CGF: Charging Gateway Function DNS: Domain Name System LSM: LTE System Manager HSS: Home Subscriber Server PCRF: Policy and Charging Rule Function UE: User Equipment SOAP: Simple Object Access Protocol TL1: Transaction Language 1 The interfaces between LTE system components are depicted below. Interfaces Interface Specifications UE/eNB eNB/EPC eNB/eNB eNB/LSM
- Physical Interface: LTE PHY OFDMA/SC-FDMA
- Interface protocol: LTE Uu Interface
- Physical Interface: FE/GE
- Interface protocol: LTE S1 Interface (S1-MME, S1-U)
- Physical Interface: FE/GE
- Interface protocol: LTE X2 Interface
- Physical Interface: FE/GE
- Interface protocol: SNMP/FTP/SOAP SAMSUNG Electronics Co., Ltd. 1-5 CHAPTER 1. Overview of LTE Network Interfaces Interface Specifications
(Continued) EPC/LSM eNB/LSS LSS/LSM EPC/PCRF EPC/DHCP Server
- Physical Interface: FE/GE
- Interface protocol: TL1/FTP
- Physical Interface: FE/GE
- Interface protocol: SNMP/FTP
- Physical Interface: FE/GE
- Interface protocol: RMI/SOAP
- Physical Interface: FE/GE
- Interface protocol: Gx Interface
- Physical Interface: FE/GE
- Interface protocol: socket communication 1.2.2 Interface protocol These are interface protocols between components. Interface between eNB and UE This shows the user plane protocol stack for interface between eNB and UE. PDCP RLC MAC PHY UE PDCP RLC MAC PHY eNB Figure 1.3 User plane protocol stack between eNB and UE The user plane protocol stack between eNB and UE is used for transmission of the IP packet, consisted of packet data convergence protocol (PDCP) sublayer, Radio Link Control (RLC) sublayer, Medium Access Control (MAC) sublayer and physical layer. 1-6 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 This shows the control plane protocol stack for interface between eNB and UE. RRC PDCP RLC MAC PHY UE RRC PDCP RLC MAC PHY eNB Figure 1.4 Control plane protocol stack between eNB and UE The control plane protocol stack between eNB and UE is used for transmission the control signal, consisted of Radio Resource Control (RRC), PDCP sublayer, RLC sublayer, MAC sublayer and physical layer. Interface between eNB and S-GW This shows the user plane protocol stack for interface between eNB and Serving Gateway
(S-GW). User Plane PDUs User Plane PDUs GTP-U UDP IP L2 L1 eNB GTP-U UDP IP L2 L1 S-GW Figure 1.5 User plane protocol stack between eNB and S-GW The user plane protocol stack between eNB and S-GW is used for transmission of Protocol Data Unit (PDU)s of user plane, consisted of GPRS Tunneling Protocol - User (GTP-U), User Datagram Protocol (UDP), IP, L2 data link layer and L1 physical layer. SAMSUNG Electronics Co., Ltd. 1-7 CHAPTER 1. Overview of LTE Network Interface between eNB and MME This shows the control plane protocol stack for interface between eNB Mobility Management Entity (MME). S1-AP SCTP IP L2 L1 eNB S1-AP SCTP IP L2 L1 MME Figure 1.6 Control plane protocol stack between eNB and MME The control plane protocol stack between eNB and MME is used for the signaling transmission for S1 interface, consisted of Stream Control Transmission Protocol (SCTP), IP, L2 data link layer and L1 physical layer. Interface between eNB and eNB This shows the user plane protocol stack for interface between eNBs. User Plane PDUs User Plane PDUs GTP-U UDP IP L2 L1 eNB GTP-U UDP IP L2 L1 eNB Figure 1.7 User plane protocol stack between eNBs 1-8 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 The user plane protocol stack between eNBs is used to transmit the user plane PDUs between eNBs, consisted of GTP-U, UDP, IP, L2 data link layer and L1 physical layer. This shows the control plane protocol stack for interface between eNBs. X2-AP X2-AP SCTP IP L2 L1 eNB SCTP IP L2 L1 eNB Figure 1.8 Control plane protocol stack between eNBs The control plane protocol stack between eNBs is used for transmission of control signal between eNBs, consisted of SCTP, IP, L2 data link layer and L1 physical layer. Interface between eNB and LSM This shows the protocol stack for interface between eNB and LSM. SOAP HTTP FTP/
SFTP SNMP SOAP HTTP FTP/
SFTP SNMP TCP UDP TCP UDP IP L2 L1 eNB IP L2 L1 LSM Figure 1.9 Protocol stack between eNB and LSM SAMSUNG Electronics Co., Ltd. 1-9 CHAPTER 1. Overview of LTE Network The protocol stack between eNB and LTE System Manager (LSM) is used for transmission of Simple Object Access Protocol (SOAP), File Transfer Protocol (FTP), Secure FTP
(SFTP) and Simple Network Management Protocol (SNMP) using Hypertext Transfer Protocol (HTTP), consisted of TCP/UDP, IP, L2 data link layer and L1 physical layer. Interface between eNB and LSS This shows the protocol stack for interface between eNB and LSS (LTE SON Server). SOAP HTTP FTP/
SFTP SNMP SOAP HTTP FTP/
SFTP SNMP TCP UDP TCP UDP IP L2 L1 eNB IP L2 L1 LSM Figure 1.10 Protocol stack between eNB and LSS The protocol stack between eNB and LSS is used for transmission of SOAP, FTP, secure FTP and SNMP using HTTP, consisted of TCP/UDP, IP, L2 data link layer and L1 physical layer. 1-10 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual CHAPTER 2. Overview of LTE eNB 2.1 Introduction to LTE eNB The 3GPP LTE represents a major advance in cellular technology. LTE is designed to meet needs for high-speed data and media transport as well as high-capacity voice support. The LTE encompasses high-speed data, multimedia unicast and multimedia broadcast services. The LTE PHY is a highly efficient means of conveying both data and control information between an enhanced eNB and mobile UE. LTE has been set aggressive performance requirements that rely on physical layer technologies. These include Orthogonal Frequency Division Multiplexing (OFDM) and Multiple Input Multiple Output (MIMO) data transmission. In addition, the LTE PHY uses Orthogonal Frequency Division Multiple Access (OFDMA) on the downlink and Single Carrier - Frequency Division Multiple Access (SC-FDMA) on the uplink. LTE eNB is controlled by EPC and connects LTE calls to UE. The LTE eNB interfaces with UE via a wireless channel observing the 3GPP LTE standard and provides high-speed data service and multimedia service in wireless broadband. The LTE eNB provides the following functions: modulation/demodulation of packet traffic signal, scheduling and radio bandwidth allocation to manage air resources efficiently and ensure Quality of Service (QoS), connection control and set/hold/disconnect the packet call connection, handover control and EPC interface and system operation management function. SAMSUNG Electronics Co., Ltd. 2-1 CHAPTER 2. Overview of LTE eNB 2.2 Main Functions The major characteristics of the LTE system are listed below. OFDMA Downlink Transmission OFDMA is employed as the multiplexing scheme in the LTE downlink. OFDMA is used to transmit data to several users simultaneously by using the sub-carrier allocated to each user and transmit data by allocating one or more sub-carriers to a specific subscriber according to the channel status and the transmission rate requested by a user. In addition, since it can select the sub-carriers with excellent features for each subscriber and allocate them to the subscribers when some subscribers divide and use the whole sub-
carrier, it can raise the data throughput by distributing the resources efficiently. SC-FDMA Uplink Transmission In the uplink, SC-FDMA is selected to efficiently meet Evolved Universal Terrestrial Radio Access (E-UTRA) performance requirements. SC-FDMA has a low power amplifier de-
rating (Cubic Metric/PAPR) requirement, thereby conserving battery life or extending range. Downlink MIMO For the LTE downlink, a 2 2 configuration for MIMO is assumed as baseline configuration, i.e., 2 transmit antennas at the base station and 2 receive antennas at the terminal side. Configurations with 4 antennas are also considered. It has to be differentiated between spatial multiplexing and transmit diversity, and it depends on the channel condition which scheme to select. Spatial multiplexing allows transmitting different streams of data simultaneously on the same downlink resource block
(s). These data stream can belong to one single user (single user MIMO/SU-MIMO) or to different users (multi user MIMO/MU-MIMO). While SU-MIMO increases the data rate of one user, MU-MIMO allows increasing the overall capacity. Uplink MIMO Uplink MIMO schemes for LTE will differ from downlink MIMO schemes to take into account UE complexity issues. For the uplink, MU-MIMO can be used. Multiple UEs may transmit simultaneously on the same resource block. This is also referred to as Spatial Domain Multiple Access (SDMA). The scheme requires only one transmit antenna at UE side which is a big advantage. 2-2 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Power Control The LTE carries out the power control function for the uplink signal received from multiple UEs and then set the power intensity of the uplink signal to a specific level. The LTE transmits the power correction command to each UE and then makes the UE power intensity be the level required when the UE transmits the modulated uplink signal in a specific Quadrature Amplitude Modulation (QAM) modulation method. LTE eNB is mainly composed of digital unit and radio unit to perform the advance technologies. The main functions of digital unit are as follows. Subscriber data traffic processing Call processing, resource allocation and OAM GTP, PDCP, OAM, RRC, RRM processing Reception of the GPS signal and creation and supply of the clock Fault diagnosis and alarm collection and control Fast Ethernet/Gigabit Ethernet interface to backhaul RLC, MAC/PHY processing OFDMA/SC-FDMA channel processing The main functions of radio unit are as follows. Upconversion/downconversion of frequency High-power amplification of RF transmission signal Suppression of out-of-band spurious wave emitted from RF Rx/Tx signal Gain control of RF Rx/Tx signal Rx/Tx RF signal from/to an antenna Low noise amplification of band-pass filtered RF Rx signal SAMSUNG Electronics Co., Ltd. 2-3 CHAPTER 2. Overview of LTE eNB 2.3 Specifications The table below shows detailed specifications. Macro Outdoor Cabinet Specifications are as follows. Items Specification Macro Outdoor 2,135MHz 2,140MHz 6 5 Max. 860 Max. (60 + 60 W)/RU Gigabit Ethernet (Optic or copper) System Type Frequency Sector Channel BW (MHz) Weight (lbs) Output power (top of cabinet) Network Interface Physical Dimensions (H x W x D) 70.8 in x 29.5 in x 37.0 in Power Supply DU-RU Interface Power Consumption a) AWS stands for Advanced Wireless Services. 220 VAC CPRI 4.0 specification (Copper) 5 MHz BW, 6Sector, (60 +60 W)/Sector MIMO Power (Rectifier) The electric properties of the rectifier in the outdoor eNB-8910 are as follows. Items Specification Input Voltage Input voltage permissible range Input Frequency Rated output voltage Output voltage variable range Rated output capacity Weight (Rectifier) 176~250 VAC 85~300 VAC 47~63 Hz 27 VDC 21.00~28.50 VDC 1000 W 7 @ 25C 12 kg 2-4 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Environmental Condition The table below lists the environmental conditions and related standards such as operational temperature and humidity. Items Specification Applied Standard Temperature Conditiona) Humidity Conditiona) Altitude Earthquake Vibration Noise (sound pressure level) Electromagnetic Wave
(EMI) US Federal Regulation
-5~50C 5~95%
However, the vapor content for air of 1 kg should not exceed 0.024 kg.
-60~1,800 m (-197~6,000 ft) Zone 4 Commercial Transportation Curve 2 Under 65 dBA in height of 1.0 m (3 ft) and distance of 1.5 m (5 ft) Standard satisfied Standard satisfied GR-487-CORE Sec. 3.26 GR-487-CORE Sec.3.34.2 GR-63-CORE Sec.4.1.3 GR-63-CORE Sec.4.4.1 GR-63-CORE Sec.4.4.4 GR-487-CORE Sec.3.29 FCC Title47 Part 15 Class B GR-1089-CORE Sec. 3.2 FCC Title47 Part27 a) The standards of temperature/humidity conditions are based on the value on the position where is 400 mm (15.8 in.) away from the front of the system and in the height of 1.5 m (59 in.) on the bottom. Environmental alarm The table below lists the environmental alarm provided in the outdoor eNB-8910 in default. Items ECM Status Temperature Alarm Fan Fail Others Specification ECM Fail report High Temperature System Fan Fail Flood, Fire, Door open, etc. SAMSUNG Electronics Co., Ltd. 2-5 CHAPTER 2. Overview of LTE eNB This page is intentionally left blank. 2-6 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual CHAPTER 3. System Architecture 3.1 Hardware Structure Macro Outdoor Cabinet for 5MHz and 6sectors is shown in following figure. ECM/FCM FAN FAN L9FU L9VU PDP (RU) Rectifier PDP (AC) PDP (DU) UADU I/O module Power input Figure 3.1 Rack Configuration of Macro Outdoor Cabinet SAMSUNG Electronics Co., Ltd. 3-1 CHAPTER 3. System Architecture LTE eNB is mainly composed of digital unit and radio unit to perform the advance technologies as shown in following figure. 3.1.1 Digital Unit (L9DU) The main functions of digital unit are as follows. Subscriber data traffic processing Call processing, resource allocation and OAM GTP, PDCP, OAM, RRC, RRM processing Reception of the GPS signal and creation and supply of the clock Fault diagnosis and alarm collection and control Fast Ethernet/Gigabit Ethernet interface to backhaul RLC, MAC/PHY processing OFDMA/SC-FDMA channel processing 3-2 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 The major functions of the boards that constitute the UADU are given below. Item Description UADU UADB UAMA 1 1 L9CA Max 3 Infra
Universal platform Digital Backboard Backplane board for the UADU Connects the traffic, control signals, and clock signals Universal platform Management board Assembly System Main processor Resource assignment, operation, and maintenance Collects alarms and reports them to the LSM Supports the backhaul (GE/FE) Supports the fan alarms Controls the ECM Provides UDE(User Defined Ethernet), UDA(User Defined Alarm) Provides signals for using a measuring instrument (10 MHz, 1 pps) LTE eNB Channel card board Assembly Call processing, resource assignment, operation, and maintenance OFDMA/SC-FDMA Channel Processing L8HU CPRI Copper interface UADU Shelf Fan module Dust filter Power module SAMSUNG Electronics Co., Ltd. 3-3 CHAPTER 3. System Architecture UAMA[Universal platform(type A) Management board Assembly]. Main Controller Function The UAMA, the main processor of the LTE eNB system, is the board which performs the topmost functions in the eNB, and sets up a communication path between the UE and EPC, carries out the Ethernet switch function within the eNB, and carries out the system operation and maintenance functions. In addition, the L9DA manages the status for all hardware/software in the eNB, allocates and manages resources, collects alarms, and reports all status information to the LSM. Clock Generation and Distribution Function The UAMA is equipped with the Universal Core Clock Module (UCCM) for receiving GPS signals. The UCCM allows the blocks of the eNB to operate under a synchronized clock system. The UCCM generates analog 10 MHz clocks (for measuring instruments or attendants) and digital clocks [PP2S (even clock), digital 10 MHz] using synchronization signals received from the GPSR and transmits them to the L9DA. The UCCM generates system clocks (30.72 MHz), PP2S (even clock), and System Fame Number (SFN) to synchronize the signals received by a board and then distributes them to the hardware blocks within the system. These clocks are used to maintain internal synchronization in the eNB and operate the system. And, the UCCM also transmits time information and location information through the TOD path. If the UCCM fails to receive GPS signals due to an error during system operation, it carries out the holdover function that supplies the normal clocks that have been provided for a specific period of time. Network Interface Function The UAMA interfaces directly with the EPC via Gigabit Ethernet or Fast Ethernet. If the network interface is provided directly to the EPC via Ethernet, a total of 4 ports, 2 optic ports, and 2 copper ports are supported. If necessary, the optic module can be changed to the LC connector type or SC connector type. In case of the copper ports, the cable configuration changes depending on the supported speed and distance. And, if either optic or copper ports are used, the other type of ports is used for the Ethernet path (for example, UDE). L9CA [LTE eNB Channel card board Assembly]
Subscriber Channel Processing Function The L9DA is equipped with the modem which supports the LTE standard physical layer. The L9DA performs OFDMA/SC-FDMA channel processing and DSP processes RLC/MAC. The modem modulates the packet data received from the upper processor and transmits them to the RF part via Common Public Radio Interface (CPRI). In the other direction, it demodulates the packet data received from the RF part, converts them to the format which is defined in the LTE standard physical layer specifications, and transmits them to the upper processor. 3-4 SAMSUNG Electronics Co., Ltd. 3.1.2 Radio Unit MetroPCS User Manual/ED.00 The RF units of the rack type are divided into the L9VU unit which consists of a power supplier, power amplifier and transceiver, and the L9FU unit which consists of a filter and LNA. The L9VU and L9FU are mounted in an outdoor rack. Below are Major Functions of the LTE eNB RF Unit. Type L9VU L9FU Specification Remarks LTE eNB Amp, Transceiver Unit
- Supports 1Carrier 5 MHz 2Tx2Rx
- Maximum output 60W + 60W per 1Carrier (for the antenna port at the outside of the rack)
- Up/Down RF conversion
- Amplifies the RF signal level LTE eNB Filter Unit
- Tx: 2135 to 2140 MHz, Rx: 1730 to 1740 MHz
- Performs the Low Noise Amplifier (LNA) function
- Suppresses spurious waves from the bandwidth
- Distributes the received signals to share the SIMO antenna
Las Vegas area SAMSUNG Electronics Co., Ltd. 3-5 CHAPTER 3. System Architecture L9VU Below are the major functions of L9VU. Supports the 2Tx2Rx MIMO The L9VU is a unit in which a power supplier, transceiver, and power amplifier are unified. Each L9VU supports the RF path of 2Tx2Rx. The maximum output is 60W/path for the antenna port at the outside of the rack. DAC/ADC and power amplification For the L9VU downlink path, the baseband signals received from the L9DA via the CPRI (copper) interface are converted to analog signals through the Digital to Analog Converter (DAC). The frequency of those analog signals is up converted through the modulator and then those signals are amplified into RF signals with larger power through the power amplifier. In case of the uplink path of the L9VU, the frequency of the signals amplified low noise from the L9FU is down converted through the demodulator. Those down converted frequency signals are converted to baseband signals through the Analog to Digital Converter (ADC). The signals converted to baseband signals are sent to the L9DA via the CPRI interface. The control signals of the L9VU are transmitted through the control path in the CPRI. If a new LTE base station is installed in the existing CDMA base station and an antenna is shared between the DMA/LTE base stations, the L9VU operates with the configuration of 1Tx2Rx. Energy Saving To save energy, the L9VU changes the output to traffic changes so that there is no big drop in the efficiency of the system. L9FU Below are the major functions of the L9FU. Suppresses spurious waves from the bandwidth The L9FU is a unit in which a band-pass filter and LNA are unified. Each L9FU supports the RF path of 2Tx2Rx. For the L9VU downlink path, the RF signals power-
amplified from L9VU satisfy the spectrum mask specified for each area through the filter part and then they are sent to the antenna. In case of the uplink path of the L9FU, the RF signals received through the filter part are amplified low noise in the LNA and sent to the L9VU. Antenna Sharing Below is the configuration for sharing an antenna between the CDMA 1x and LTE base stations. The L9FU LNA out1 port of the LTE base station is connected to the MCR (transceiver) Rx2 port of the CDMA 1x base station using an external cable and the signals received in the LTE base station are transmitted to the CDMA 1x base station. In the same way, the duplex filter J6 port of the CDMA 1x base station is connected to the L9VU Rx2 port of the LTE base station using an external cable and the signals received in the CDMA 1x base station are transmitted to the LTE base 3-6 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 station. To minimize degradation of the noise figure performance for the existing CDMA 1x base station being operated, the size of the received signals is adjusted using a variable attenuator within the L9FU. Xpol Antenna CDMA Tx1 MCR Rx1 Rx2 CDMA Tx1/Rx1 LTE Rx2 CDMA Rx2 LTE Tx1/Rx1 J8 Duplex Filter J28 J6 J5 J4 J26 J25 J24 CDMA Rx diversity cable LTE Rx diversity cable LTE L9FU ANT1 ANT2 LNA OUT 1 L9VU Rx2 Figure 3.3 RF Configuration for Antenna Sharing UAMA External Interfaces Interface Type Connector Type Quantity Description Copper Backhaul RJ-45 Optic Backhaul SW Debug SFP USB RJ-45 RJ-45 Mini Champ Reset LED RJ-45 SMA SMA UDE UDA Reset LED Rectifier IF GPS In Ref. Clock Out 2 2 1 1 1 1 1 4 2 1 1 1000 Base-T 1000 Base-LX/SX UART CPU 10/100/1000 Base-T User Defined Ethernet (10/100 Base-TX) User Defined Alarm (Rx: 18 port, Tx: 2 port) System reset SYS, GPS, OBH (for Optic housing LED 2 port) Ethernet 1 port, RS-485 1 port GPS Input (to UCCM) Analog 10 MHz SAMSUNG Electronics Co., Ltd. 3-7 CHAPTER 3. System Architecture SMA 1 1 pps L9CA External Interfaces Interface Type Connector Type Quantity Description CPRI SW Debug Reset LED Copper USB Reset LED L9VU/L9FU External Interfaces 6 2 1 1 L9VU IF(CPRI 4.0) UART DSP Debug Board reset SYS Interface Type Connector Type Quantity Description CPRI Antenna LNA out DC power Tx monitoring LED Copper N-type female SMA female
SMA female LED 2 2 2 1 2 1 L9CA interface, Cascaded RU 2Tx2Rx 1x BTS interface
+27 VDC PA coupled output monitoring port Status alarm 3-8 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 3.1.3 Cooling Architecture The eNB maintains the inside temperature of the system at an appropriate range using four system cooling FANs, so that the system can operate normally when the outside temperature and load of the system changes. FAN FAN FAN FAN Figure 3.4 Configuration of FANs SAMSUNG Electronics Co., Ltd. 3-9 CHAPTER 3. System Architecture 3.1.4 Environment Sensors Environment sensors are mounted on as figure below. Door Switch Fire Sensor Temperature Sensor Flood Sensor Figure 3.5 Configuration of Environment Sensors Description Detects whether the temperature of system maintains within operation condition. Detects whether the system is flooded. Detects whether a fire break out. Detects whether door opens or close. Items Temperature Sensor Flood Sensor Fire Sensor Door Switch 3-10 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 3.2 Software Structure The components of the LTE eNB software is shown below. User Space CPS MW OAM IPRS NP SW Kernel Space OS DD Hardware Figure 3.6 Software Structure 3.2.1 Operating System (OS) In Samsung SW architecture, OS consists of 3 part, Linux Kernel Core (LKC), Board Support Package (BSP) and Samsung in-house kernel module. LKC is a native Linux kernel that provides general OS functions such as memory management, file management and etc. BSP is a software package for OS to control Samsung HW platform. Samsung provides in-house kernel module for Inter Process Communication (IPC), virtual interface management, system resource management and controlling simple HWs such as LED and etc. 3.2.2 Network Processing Software (NP SW) NP SW processes the eNB data plane. The main functions of NP SW are L2 and L3 packet processing including Link Aggregation (LAG) processing, Virtual LAN (VLAN) processing, IP forwarding, Access Control List (ACL) processing, QoS processing, IP Security(IPSec) processing, and GTP tunneling/detunneling. All the NP SW functions are implemented as thin data plane software modules with no help of complicated OS functions, which maximizes the data plane performance. On top of the NP SW, there is a control software module to control and manage the NP SW. The module provides the interfaces to other software modules, various database management for NP SW and management functions like the initialization and status monitoring of NP SW. SAMSUNG Electronics Co., Ltd. 3-11 CHAPTER 3. System Architecture 3.2.3 Device Driver (DD) DD controls a particular type of device that is attached to Samsung HW platform. In Samsung SW architecture, DD mainly manages network devices such as switch devices, MAC devices and PHY devices. 3.2.4 Middleware (MW) MW helps the smooth operation between OS and application under various types of hardware environment, and to achieve this, MW provides various services:
Message delivery service between applications, event notification service, High Availability (HA) service for duplex managing and data backup, debugging utility services. 3.2.5 IP Routing Subsystem (IPRS) IPRS executes the IP routing protocol function. IPRS collects and manages the system configuration and status data necessary for IP routing operation, and based on the data, it generates the routing table via the routing protocol, and makes packet forwarding possible. 3.2.6 Call Processing Software (CPS) eNB initialization and common channel establishment function CPS is the call processing software, which is composed of control plane and user plane. Control plane processes call setup/control and user plane processes user data traffic. CPS consists of the following software modules such as ECMB, ECCB, GTPB, PDCB, RLCB and MACB. eNB Common Management Block (ECMB) ECMB includes the following functions. System information transmission eNB Call Control Block (ECCB) ECCB includes the following functions. Radio resource management Basic call access control Handover call control S1/X2-AP junction GTP Block (GTPB) GTPB includes GTP-U tunneling function for S1/X2 function. 3-12 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 PDCB Block (PDCB) PDCB includes the following functions Packet header compression/decompression Ciphering/integrity RLC Block (RLCB) RLCB includes the following functions AM/UM/TM mode Segmentation/Reassembly ARQ MAC Block (MACB) MACB includes the following functions Mapping between logical channel and transport channel Multiplexing and De-multiplexing Random Access Hybrid ARQ Scheduling SAMSUNG Electronics Co., Ltd. 3-13 CHAPTER 3. System Architecture 3.2.7 Operation and Maintenance (OAM) The OAM provides the interface (SNMP, FTP, HTTP) with LTE System Manager (LSM) or Web based-Element Maintenance Terminal (Web-EMT). In addition, this performs the functions of initializing the system, collecting the statistics for various performance data, managing the system configuration and resources, managing the status of the software resources and the hardware resources, managing the failure and performing the diagnostics for the operation and the management. OAM is composed of Management Interface (MIF) and OAM operating in main processor board. OAM gives the following system management functions. Main Processor OAM CM FM TM PM Loader SwM IPC API API Shared Memory Software Entity LSM Image Server LSM SNMP FTP FTP MIF SNMP Agent UDP HTTP EMTS Telnet UI Web-EMT CLI Figure 3.7 OAM Block The detailed structure and interface of each block are as follows. 3-14 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 3.2.7.1 Maintenance Interface (MIF) MIF includes SNMP agent and web server function. It also provides interface between Element Management System (EMS) or Web based-Element Maintenance Terminal (Web-
EMT) and System OAM. SNMP Agent SNMP Agent performs SNMP agent role for supporting standard SNMP. It also provides interface with LSM which can perform eNB information retrieval/modification related commands using get/get-next/get-bulk/set/trap defined in SNMP. The main functions of SNMP Agent are as follows. Provides interface between EMS and OAM SNMP message processing Performs the operator commands received from EMS and send SNMP response to the LSM SNMP notification function about eNB modification and fault Element Maintenance Terminal Server (EMTS) EMTS plays role of HTTP server to support the Web-EMT interface. It also provides the secured communication with Web-EMT using Secure Socket Layer (SSL) protocol. The main functions of EMTS are as follows. HTTP server function for Web-EMT User authentication function through the eNB or EMS SAMSUNG Electronics Co., Ltd. 3-15 CHAPTER 3. System Architecture 3.2.7.2 Functionalities of OAM Inventory data control Configuration Management (CM) System modification System monitoring System control Configuration data control System time control Plug & play Fault Management (FM) Alarm monitoring Alarm Information change Minimization of service impact in fault Performance Management (PM) Performance data collection control Performance data management Threshold alarm management Loader Setting IP address from IS (Image Server) File contents download from IS Monitor the SwM and rebooting in abnormal state Software Management (SwM) Monitor the operation of software block Restart system Software upgrade Firmware upgrade Test Management (TM) Test job start and end by an operator command Test operation condition set/monitor Test operation state monitor Periodic automatic test/diagnostics 3-16 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Trace Management (TRM) Trace control Trace data management Log Management (LOG) Event log collection Event log data management Event reporting Security Management (SM) User account Authentication/authorization Access log SAMSUNG Electronics Co., Ltd. 3-17 MetroPCS User Manual CHAPTER 4. Message Flow This section presents call flows and functional descriptions of Attach, Service Request, and Detach procedures and also covers the Intra E-UTRAN Handover procedures. 4.1 Attach Procedure A UE needs to register with the network to receive services that require registration. This registration is described as Network Attachment. The UE enters the registered state by a successful registration with an Attach procedure to E-UTRAN. The MME enters the registered state by an Attach procedure via E-UTRAN. In the registered state, the UE can receive services that require registration in the Evolved Packet System (EPS). Figure of Attach procedure illustrates a call flow for the Attach procedure, and table of attach procedure shows functional description for each step of the procedure. SAMSUNG Electronics Co., Ltd. 4-1 CHAPTER 4. Message Flow UE eNB MME S-GW EPC 1. Random Access procedure 2. RRCConnectionRequest 3. RRCConnectionSetup 4. RRCConnectionSetupComplete
(ATTACH REQUEST) 5. INITIAL UE MESSAGE
(ATTACH REQUEST) 6. Authentication/NAS security setup 7. Create Session Request 8. Create Session Response 10. UECapabilityEnquiry 11. UECapabilityInformation 13. SecurityModeCommand 14. SecurityModeComplete 9. INITIAL CONTEXT SETUP REQUEST
(ATTACH REQUEST) 12. UE CAPABILITY INFO INDICATION 15. RRCConnectionReconfiguration
(ATTACH REQUEST) 16. RRCConnectionReconfiguration Complete Uplink data Uplink data 18. ULInformationTransfer 17. INITIAL CONTEXT SETUP RESPONSE
(ATTACH REQUEST) 19. UPLINK NAS TRANSPORT
(ATTACH REQUEST) 20. Modify Bearer Request 21. Modify Bearer Response Downlink data Downlink data Figure 4.1 Attach procedure 4-2 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Below is Attach procedure. Steps Description 1 2-4 5 6 7-8 9 10-12 13-14 15-16 17 The UE performs the Random Access procedure (see Section 5.1 in TS 36.321) with an eNB. The UE initiates the RRC Connection Establishment procedure (see Section 5.3.3 in TS 36.331). The UE sends a NAS message ATTACH REQUEST to the eNB encapsulated in an RRC message RRCConnectionSetupComplete. The eNB derives an MME from RRC parameters. The eNB forwards the ATTACH REQUEST message to the MME contained in an S1-MME control message INITIAL UE MESSAGE. If no UE context for the UE exists anywhere in the network, if the ATTACH REQUEST message was not integrity protected, or if the check of the integrity failed, then authentication and NAS security setup to activate integrity protection and NAS ciphering are mandatory. The UE performs the EPS Authentication and Key Agreement
(AKA) procedure (see Section 6.1.1 in TS 33.401) with the MME. The MME uses the NAS Security Mode Command (SMC) procedure (see Section 7.2.4.4 in TS 33.401) to establish a NAS security association between the UE and MME. The MME selects a P-GW and an S-GW. The MME sends a Create Session Request message to the S-GW. The S-GW creates a new entry in its EPS bearer table. After this step, the S-GW buffers any downlink packets it may receive from the P-GW until it receives the Modify Bearer Request message in step 17 below. The S-GW returns a Create Session Response message to the MME. The MME sends an ATTACH ACCEPT message to the eNB contained in an S1-MME control message INITIAL CONTEXT SETUP REQUEST. This S1 control message also includes the AS security context information for the UE, which triggers the RRC level AS SMC procedure in steps 10-11. If no UE Radio Capability information is included in INITIAL CONTEXT SETUP REQUEST message, this triggers the eNB to request the UE Radio Capability from the UE and upload it to the MME in the S1 interface UE CAPABILITY INFO INDICATION message. The eNB sends a SecurityModeCommand message to the UE, and the UE replies with a SecurityModeComplete message. Downlink ciphering at the eNB shall start after sending the SecurityModeCommand message. Uplink deciphering at the eNB shall start after receiving of the SecurityModeComplete message. Uplink ciphering at the UE shall start after sending the SecurityModeComplete message. Downlink deciphering at the UE shall start after receiving of the SecurityModeCommand message. The eNB sends an RRCConnectionReconfiguration message to the UE including the ATTACH ACCEPT message. The UE sends an RRCConnectionReconfigurationComplete message to the eNB. After the ATTACH ACCEPT message, the UE can then send uplink packets towards the eNB which will then be tunneled to the S-GW and P-GW. The eNB sends an INITIAL CONTEXT RESPONSE message to the MME. SAMSUNG Electronics Co., Ltd. 4-3 CHAPTER 4. Message Flow
(Continued) Description The UE sends an ULInformationTransfer message to the eNB, which includes an ATTACH COMPLETE message. The eNB forwards the ATTACH COMPLETE message to the MME in an UPLINK NAS TRANSPORT message. Upon reception of both, the INITIAL CONTEXT RESPONSE message in step 14 and the ATTACH COMPLETE message in step 16, the MME sends a Modify Bearer Request message to the S-GW. The S-GW acknowledges by sending a Modify Bearer Response message to the MME. The S-GW can then send its buffered downlink packets to the eNB. Steps 18-19 20-21 4-4 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 4.2 Service Request Procedure Two service request procedures are provided when the UE accesses the EPS through E-UTRAN. The first service request procedure is UE triggered Service Request procedure and the other service request procedure is network triggered Service Request procedure. UE triggered Service Request procedure A UE is in idle state when no NAS signaling connection between UE and network exists. There exists no UE context in E-UTRAN for the UE in the idle state. There is no S1-MME and no S1-U connection for the UE in the idle state. The UE in the registered and idle state shall perform a Service Request procedure in order to establish the radio bearers when uplink user data is to be sent. The UE and the MME shall enter the connected state when the signaling connection is established between the UE and the MME. Figure of UE triggered Service Request procedure illustrates a call flow for the UE triggered Service Request procedure, and table of UE triggered Service Request procedure shows functional description for each step of the procedure. SAMSUNG Electronics Co., Ltd. 4-5 CHAPTER 4. Message Flow UE eNB MME S-GW EPC 1. Random Access procedure 2. RRCConnectionRequest 3. RRCConnectionSetup 4. RRCConnectionSetupComplete
(SERVICE REQUEST) 5. INITIAL UE MESSAGE
(SERVICE REQUEST) 6. Authentication/NAS security setup 7. INITIAL CONTEXT SETUP REQUEST
(SERVICE REQUEST) 8. SecurityModeCommand 9. SecurityModeComplete 10. RRCConnectionReconfiguration
(ATTACH REQUEST) 11. RRCConnectionReconfiguration Complete Uplink data Uplink data 12. INITIAL CONTEXT SETUP RESPONSE 13. Modify Bearer Request 14. Modify Bearer Response Downlink data Downlink data Figure 4.2 UE triggered Service Request procedure 4-6 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Below is UE triggered Service Request procedure. Steps Description 1 2-4 5 6 7 8-11 12 13-14 The UE performs the Random Access procedure with an eNB. The UE sends a NAS message SERVICE REQUEST towards the MME encapsulated in an RRC message to the eNB. The eNB forwards the SERVICE REQUEST message to the MME encapsulated in an S1-AP message INITIAL UE MESSAGE. Step 6 in table of Attach procedure. The MME sends an S1-AP message INITIAL CONTEXT SETUP REQUEST to the eNB. This step activates the radio and S1 bearers for all the active EPS bearers. The eNB establishes RRC radio bearers. The user plane security is established at this step. The uplink data from the UE can now be forwarded by the eNB to the S-GW. The eNB sends the uplink data to the S-GW which forwards it to the P-GW. The eNB sends an S1-AP message INITIAL CONTEXT SETUP COMPLETE to the MME. The MME sends a Modify Bearer Request message per PDN connection to the S-GW. The S-GW is now able to transmit downlink data towards the UE. The S-GW sends a Modify Bearer Response to the MME. SAMSUNG Electronics Co., Ltd. 4-7 CHAPTER 4. Message Flow Network triggered Service Request procedure When the S-GW receives a downlink data packet for a UE known as not user plane connected, the MME needs to signal with the UE in the idle state, or the S-GW receives control signaling, the MME pages the UE via eNBs. The UE in the registered and idle state shall answer to paging from the MME by performing a Service Request procedure. Figure of Network triggered Service Request procedure illustrates a call flow for the network triggered Service Request procedure, and table of Network triggered Service Request procedure shows functional description for each step of the procedure. UE eNB MME S-GW EPC 1. Downlink Data Notification 3.PAGING 2. Downlink Data Notification Acknowledge 4. Paging 5. UE triggered Service Request procedure Figure 4.3 Network triggered Service Request procedure Below is Network triggered Service Request procedure. Steps 1-2 3 4 5 Description When the S-GW receives a downlink data packet for a UE known as not user plane connected, the S-GW sends a Downlink Data Notification message to the MME for which it has control plane connectivity for the given UE. The MME responds to the S-GW with a Downlink Data Notification Acknowledge message. If the S-GW receives additional downlink data packets for this UE, the S-GW buffers these downlink data packets and the S-GW does not send a new Downlink Data Notification. If the UE is registered in the MME, the MME sends a PAGING message to each eNB belonging to the tracking area (s) in which the UE is registered. If eNBs receive PAGING messages from the MME, the UE is paged by the eNBs. When UE is in the idle state, upon reception of Paging indication in E-UTRAN access, the UE initiates the UE triggered Service Request procedure. The S-GW transmits downlink data towards the UE, via the RAT which performed the Service Request procedure. 4-8 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 4.3 Detach Procedure The Detach procedure allows:
The UE to inform the network that it does not want to access the EPS any longer The network to inform the UE that it does not have access to the EPS any longer. The UE is detached either explicitly or implicitly:
Explicit detach: The network or the UE explicitly requests detach and signal with each other. Implicit detach: The network detaches the UE, without notifying the UE. This is typically the case when the network presumes that it is not able to communicate with the UE, e.g. due to radio conditions. Two detach procedures are provided when the UE accesses the EPS through E-UTRAN. The first detach procedure is UE initiated Detach procedure and the other detach procedure is network (MME) initiated Detach procedure. UE initiated Detach procedure Figure of UE initiated Detach procedure illustrates a call flow for the UE initiated Detach procedure, and table of UE initiated Detach procedure shows functional description for each step of the procedure. EPC UE eNB MME S-GW 1. ULInformationTransfer 6. DLInformationTransfer
(DETACH ACCEPT) 8. RRCConnectionRelease 2. UPLINK NAS TRANSPORT
(DETACH REQUEST) 3. Delete Session Request 4. Delete Session Request 5. DOWNLINK NAS TRANSPORT
(DETACH ACCEPT) 7. UE CONTEXT RELEASE COMMAND
(Detach) 9. UE CONTEXT RELEASE COMPLETE Figure 4.4 UE initiated Detach procedure SAMSUNG Electronics Co., Ltd. 4-9 CHAPTER 4. Message Flow Below is UE initiated Detach procedure. Description The UE sends a NAS message DETACH REQUEST to the MME. This NAS message is used to trigger the establishment of the S1 connection if the UE was in idle mode. The active EPS bearers and their context information in the S-GW regarding this particular UE and related to the MME are deactivated by the MME sending a Delete Session Request message per PDN connection to the S-GW. When the S-GW receives the Delete Session Request message from the MME, the S-GW releases the related EPS bearer context information and responds with a Delete Session Response message. If the detach is not due to a switch off situation, the MME sends a NAS message DETACH ACCEPT to the UE. The MME releases the S1-MME signaling connection for the UE by sending a UE CONTEXT RELEASE COMMAND message to the eNB with Cause IE set to Detach. If the RRC connection is not already released, the eNB sends an RRCConnectionRelease message to the UE in acknowledged mode. Once the message is acknowledged by the UE, the eNB releases the UE context. The eNB confirms the S1 release by returning a UE CONTEXT RELEASE COMPLETE message to the MME. With this, the signaling connection between the MME and the eNB for that UE is released. This step shall be performed promptly after step 7. Steps 1-2 3 4 5-6 7 8 9 4-10 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 MME initiated Detach procedure Figure of MME initiated Detach procedure illustrates a call flow for the MME initiated Detach procedure, and table of MME initiated Detach procedure shows functional description for each step of the procedure. EPC UE eNB MME S-GW 2. DLInformationTransfer
(DETACH REQUEST) 5. ULInformationTransfer
(DETACH ACCEPT) 8. RRCConnectionRelease 1. DOWNLINK NAS TRANSPORT
(DETACH REQUEST) 3. Delete Session Request 4. Delete Session Request 6. UPLINK NAS TRANSPORT
(DETACH ACCEPT) 7. UE CONTEXT RELEASE COMMAND
(Detach) 9. UE CONTEXT RELEASE COMPLETE Figure 4.5 MME initiated Detach procedure Below is MME initiated Detach procedure. Steps 1-2 3-4 5-6 7 8-9 Description The MME may implicitly detach a UE, if it has not had communication with UE for a long period of time. The MME does not send a DETACH REQUEST message to the UE for implicit detach. If the UE is in connected state the MME may explicitly detach the UE by sending the DETACH REQUEST message to the UE. Steps 3-4 in table of UE initiated Detach procedure. If the UE receives the DETACH REQUEST message from the MME in step 2, the UE sends a DETACH ACCEPT message to the MME any time after step 2. The eNB forwards this NAS message to the MME. After receiving the DETACH ACCEPT message and the Delete Session Response message, the MME releases S1 for the UE by sending a UE CONTEXT RELEASE COMMAND message to the eNB with Cause IE set to Detach. Steps 8-9 in table of UE initiated Detach procedure. SAMSUNG Electronics Co., Ltd. 4-11 CHAPTER 4. Message Flow 4.4 Intra E-UTRAN Handover Procedure We present X2-based Handover procedure (TS 36.300), S1-based Handover procedure (TS 23.401), and CDMA2000 HRPD Handover procedure (TS 23.402) in this section. X2 based handover procedure The X2-based Handover procedure is used to hand over a UE from a source eNB to a target eNB using the X2 reference point. In this procedure the MME is unchanged. In addition to the X2 reference point between the source and target eNB, the procedure relies on the presence of S1-MME reference point between the MME and the source eNB as well as between the MME and the target eNB. Figure of X2 based handover procedure illustrates a call flow for the X2-based Handover procedure, and table of X2 based handover procedure shows functional description for each step of the procedure. UE Source eNB Target eNB MME S-GW EPC Downlink/Uplink data Downlink/Uplink data 1. MeasurementReport 2. HANDOVER REQUEST 4. RRCConnection-
Reconfiguration
(mobilityControlinfo) 3. HANDOVER REQUEST ACKNOWLEDGE 5. SN STATUS TRANSFER Data forwarding 6. Synchronization/UL allocation and timing advance 7. RRCConnectionReconfigurationComplete Forwarded data Uplink data Uplink data 8. PATH SWITCH REQUEST 9. Modify Bearer Request Forwarded data Downlink data End marker 12. UE CONTEXT RELEASE End marker Downlink data 11. PATH SWITCH REQUEST ACKNOWLEDGE 10. Modify Bearer Response Down/Uplink data Down/Uplink data Figure 4.6 X2 based handover procedure 4-12 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 Below is X2 based handover procedure. Description The UE is triggered to send a MeasurementReport message by the rules set (i.e., system information, specification, and other things). The source eNB makes decision based on the MeasurementReport message and RRM information to hand over the UE. The source eNB issues a HANDOVER REQUEST message to the target eNB passing necessary information to prepare the handover at the target side. Admission control may be performed by the target eNB dependent on the received E-RAB QoS information. The target eNB prepares the handover and generates an RRC message RRCConnection-Reconfiguration including the mobilityControlInfo IE to perform the handover. The target eNB sends a HANDOVER REQUEST ACKNOWLEDGE message to the source eNB including the RRCConnectionReconfiguration message. The source eNB sends the RRCConnectionReconfiguration message with necessary parameters to the UE. The UE is commanded by the source eNB to perform the handover. The source eNB sends an SN STATUS TRANSFER message to the target eNB to convey the uplink PDCP SN receiver status and the downlink PDCP SN transmitter status of E-RABs for which PDCP status preservation applies. The source eNB forwards the downlink data packets to the target eNB, and the target eNB buffers the packets. After receiving the RRCConnectionReconfiguration message including the mobility-
ControlInfo IE, the UE performs synchronization to the target eNB and accesses the target cell via Random Access CHannel (RACH). The target eNB responds with UL allocation and timing advance. When the UE has successfully accessed the target cell, the UE sends an RRCConnection-ReconfigurationComplete message to the target eNB to indicate that the handover procedure is completed for the UE. The target eNB sends a PATH SWITCH REQUEST message to the MME to inform that the UE has changed cell. The MME sends a Modify Bearer Request message to the S-GW. The S-GW switches the downlink data path to the target side. The S-GW sends one or more end marker packets on the old path to the source eNB and then can release any user plane resources towards the source eNB. The S-GW sends a Modify Bearer Response message to the MME. The MME confirms the PATH SWITCH REQUEST message with a PATH SWITCH REQUEST ACKNOWLEDGE message. By sending a UE CONTEXT RELEASE message, the target eNB informs success of handover to the source eNB and triggers the release of resources by the source eNB. Upon reception of the UE CONTEXT RELEASE message, the source eNB can release radio and control plane related resources associated to the UE context. Steps 1 2 3-4 5 6 7 8 9-10 11 12 SAMSUNG Electronics Co., Ltd. 4-13 CHAPTER 4. Message Flow S1 based handover procedure The S1-based Handover procedure is used when the X2-based handover cannot be used. A UE performs the handover from the source eNB to the target eNB using the S1-MME reference point. This procedure may relocate the MME. The MME should not be relocated during inter-eNB handover unless a UE leaves the MME Pool Area where the UE is served. In this section, we assume that the UE does not leave the MME Pool Area during the handover. The source eNB decides which of the EPS bearers are subject for forwarding of packets from the source eNB to the target eNB. Packet forwarding can take place either directly from the source eNB to the target eNB, or indirectly from the source eNB to the target eNB via the S-GW. The availability of a direct forwarding path is determined in the source eNB and indicated to the MME. If X2 connectivity is available between the source and target eNBs, a direct forwarding path is available. If a direct forwarding path is not available, indirect forwarding may be used. The MME uses the indication from the source eNB to determine whether to apply indirect forwarding. Figure of S1 based handover procedure illustrates a call flow for the S1-based Handover procedure, and table of S1 based handover procedure shows functional description for each step of the procedure. 4-14 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 UE Source eNB Target eNB MME S-GW EPC Downlink/Uplink data Downlink/Uplink data 1. Decision to trigger a relocation via S1 2. HANDOVER REQUIRED 3. HANDOVER REQUEST 4. HANDOVER REQUEST ACKNOWLEDGE 7. HANDOVER COMMAND 9. eNB STATUS TRANSFER 5. Create Indirect Data Forwarding Tunnel Request 6. Create Indirect Data Forwarding Tunnel Response 1) Direct data forwarding 2) Indirect data fowarding 10. MME STATUS TRANSFER Indirect data forwarding 8. RRCConnection-
Reconfiguration
(mobilityControlinfo) 11. Detach from old cell/Synchronize to new cell 12. RRCConnectionReconfigurationComplete Forwarded data Uplink data Uplink data 13. HANDOVER NOTIFY 14. Modify Bearer Request 15. Modify Bearer Response Forwarded data Downlink data End marker End marker Downlink data 16. Tracking Area Update procedure 17. UE CONTEXT RELEASE COMMAND 18. UE CONTEXT RELEASE COMPLETE 19. Delete Indirect Data Forwarding Tunnel Request 20. Delete Indirect Data Forwarding Tunnel Response Downlink/Uplink data Downlink/Uplink data Figure 4.7 S1 based handover procedure SAMSUNG Electronics Co., Ltd. 4-15 CHAPTER 4. Message Flow Below is S1 based handover procedure. Steps Description The source eNB decides to initiate an S1-based handover to the target eNB. This can be triggered e.g. by no X2 connectivity to the target eNB, or by an error indication from the target eNB after an unsuccessful X2-based handover, or by dynamic information learnt by the source eNB. The source eNB sends a HANDOVER REQUIRED message to the MME. The source eNB indicates which bearers are subject to data forwarding and whether direct forwarding is available from the source eNB to the target eNB. This indication from source eNB can be based on e.g., the presence of X2. The MME sends a HANDOVER REQUEST message to the target eNB. This message creates the UE context in the target eNB, including information about the bearers, and the security context. The target eNB sends a HANDOVER REQUEST ACKNOWLEDGE message to the MME. If indirect forwarding applies, the MME sends a Create Indirect Data Forwarding Tunnel Request to the S-GW. The S-GW responds with a Create Indirect Data Forwarding Tunnel Response message to the MME. The MME sends a HANDOVER COMMAND message to the source eNB. The source eNB constructs an RRC message RRCConnectionReconfiguration using the Target to Source Transparent Container IE in the HANDOVER COMMAND message and sends the RRC message to the UE. The source eNB sends an eNB/MME STATUS TRANSFER message to the target eNB via the MME to convey the PDCP and HFN status of the E-RABs for which PDCP status preservation applies. The source eNB may omit sending this message if none of the E-RABs of the UE shall be treated with PDCP status preservation. The source eNB should start forwarding of downlink data from the source eNB towards the target eNB for bearers subject to data forwarding. This may be either direct or indirect forwarding. The UE performs synchronization to the target eNB and accesses the target cell via RACH. The target eNB responds with UL allocation and timing advance. After the UE has successfully synchronized to the target cell, the UE sends an RRCConnectionReconfigurationComplete message to the target eNB to confirm the handover. Downlink packets forwarded from the source eNB can be sent to the UE. Also, uplink packets can be sent from the UE, which are forwarded to the S-GW. The target eNB sends a HANDOVER NOTIFY message to the MME. Timers in the MME are started to supervise when resources in the source eNB and the temporary resources used for indirect forwarding in the S-GW shall be released. The MME sends a Modify Bearer Request message to the S-GW for each PDN connection. Downlink packets from the S-GW are immediately sent on to the target eNB. The S-GW sends a Modify Bearer Response message to the MME. The S-GW shall send one or more end marker packets on the old path immediately after switching the path in order to assist the reordering function in the target eNB. 1 2 3-4 5-6 7-8 9-10 11 12 13 14 15 4-16 SAMSUNG Electronics Co., Ltd. Steps 16 MetroPCS User Manual/ED.00
(Continued) Description The UE initiates a Tracking Area Update procedure when one of the conditions listed in Section 5.3.3.0 of TS 23.401 applies. 17-18 When the timer started in step 13 expires the MME sends a UE CONTEXT RELEASE COMMAND message to the source eNB. The source eNB releases its resources related to the UE and responds with a UE CONTEXT RELEASE COMPLETE message. If indirect forwarding was used then the expiry of the timer at the MME started in step 13 triggers the MME to send a Delete Indirect Data Forwarding Tunnel Request message to the S-GW to release the temporary resources used for indirect forwarding that were allocated at step 5. The S-GW responses with a Delete Indirect Data Forwarding Tunnel Response message to the MME. 19-20 SAMSUNG Electronics Co., Ltd. 4-17 CHAPTER 4. Message Flow 4.5 Network Synchronization Signal Flow The LTE eNB supports GPSR in synchronization mode. In GPS synchronization mode, the UCCM receives the synchronization signals from the GPS and generates clocks and distributes them within the UADU. Control SYS (System Clock 30.72 MHz) SFN (System Frame Number) PP2S (Even Clock) UADU Analog10 MHz PP2S (Even Clock) Clock Generation & Distribution Digital 10 MHz PP2S (Even Clock) UCCM External Network CDMA BTS GPSR 1 pps Analog 10 MHz Test equipment Figure 4.8 DU Synchronization Signal Flow The synchronization signals are transmitted from the DU to the RU via the CPRI interface, and clocks are extracted from the CPRI signals and used as synchronization signals for the RU. UADU
(UCCM) L9VU #5 L9VU #4 L9VU #3 L9VU #2 L9VU #1 L9VU #0 SYS: System clock 30.72 MHz SFN: System Frame Number PP2S: Even Clock Figure 4.9 RU Synchronization Signal Flow 4-18 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 4.6 Alarm and Reset Signal Flow In LTE eNB, when an environmental fault occurs or H/W is mounted or unmounted, it is reported using an alarm signal. All alarms are collected in the DU and reported to the management system, LSM. The alarms collected in the DU are as follows: The DU can provide through the UDA the alarms the user wants to provide. The DU provides the environmental alarms (flooding, door, fire, temperature, humidity, etc.) through the ECM and can control the fan. When the operator wants to reset a board or unit, he carries out a remote reset through the DU. D LSM B A UADU Figure 4.10 Alarm and Reset Signal Flow UDA ECM C L9VU #5 L9VU #4 L9VU #3 L9VU #2 L9VU #1 L9VU #0 A: Reset B: Alarm C: Alarm/Reset D: Remote Pattern Reset SAMSUNG Electronics Co., Ltd. 4-19 CHAPTER 4. Message Flow 4.7 Loading Flow Loading is the procedure for downloading the necessary software executables and data from the upper system so that each processor and device of the system can be operated normally, or the procedure for executing the related software executables from the non-
volatile storage media within the system. Loading is performed when the system is initialized or restarted. The loading for a board is performed when it is mounted to the system, hardware reset is performed, and it is restarted by the operator's decision. The loading process during the eNB initialization is as follows. eNB UADU Device LSM Figure 4.11 Loading Flow Below is the signal flow for loading. 1) The LSM initializes the UADU. 2) The UADU initializes sub devices using the software downloaded by the LSM. When loading is performed while the eNB is operating because the software has changed, package version replacement or block change, etc. is applied depending on the scope of the software changes. Also, the UADU loads and stores the changed program during operation and then replaces the previous version program with it when the processor is restarted. The operator can view the information for the program loaded in eNB using the system output window of the LSM. 4-20 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 4.8 Operation and Maintenance Signal Flow The eNB collects various events (statistics, status, faults etc.) that occur within the system and reports them to the LSM. The LSM displays them in the system output window or the alarm status window so that the operator can know the status of each system within a station. The statistics events are collected and transmitted to the LSM every five (5) minutes, while other operation and maintenance events are reported in real time. The flow of the eNB operation and maintenance signals is as follows. eNB UADU Device LSM Figure 4.12 Operation/Maintenance Signal Flow The signal flow for the operation and maintenance is given below. 1) Each device reports various events (status, faults, etc.) to the UADU. 2) The UADU collects the reported events and reports them to the LSM. SAMSUNG Electronics Co., Ltd. 4-21 CHAPTER 4. Message Flow This page is intentionally left blank. 4-22 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual CHAPTER 5. Additional Functions and Tools 5.1 Command Line Interface (CLI) The CLI is used to operate and maintain eNB. The operator must log in to the eNB via telnet from a PC that can be connected to that eNB via Ethernet, and then the operator should run the CLI program within that eNB to execute the text-based operation and maintenance commands. eNodeB PC UADU Device Figure 5.1 Connecting to the CLI Below are the functions the CLI provides. Loading The CLI provides the function that loads a program necessary for the eNB. Therefore, the CLI can initialize the eNB normally without synchronizing with the LSM and can load a specific device selectively. And, it can reset or restart each board of the eNB. Configuration management The CLI provides the function that executes the Man-to-Machine Commands (MMC) that allow viewing and changing the configuration information for the eNB. SAMSUNG Electronics Co., Ltd. 5-1 CHAPTER 4. Additional Functions and Tools Status Management The CLI provides the function that manages the status for the processors and various devices of the eNB. Fault Management The CLI checks whether there are any faults with the processors and various devices of the eNB and provides the operator with the location and log of each fault. Since the CLI can display both of the hardware and software faults, the operator can know all faults that occur in the eNB. Diagnosis and Test The CLI provides the function that diagnoses the connection paths, processors, and various devices that are being operated in the eNB, and provides the test function that can detect a faulty part. The major test functions that the CLI can perform include measuring the sending output and the antenna diagnosis function, etc. 5-2 SAMSUNG Electronics Co., Ltd. MetroPCS User Manual ABBREVIATION 3 A B C D 3GPP 3rd Generation Partnership Project AAA ACL ADC AKA ARQ AWS BSP CGF CLI CM CN CPLD CPRI CPS CS DAC DD DHCP DNS Authentication, Authorization and Accounting Access Control List Analog to Digital Converter Authentication and Key Agreement Automatic Repeat Request Advanced Wireless Services Board Support Package Charging Gateway Functionality Command Line Interface Configuration Management Core Network Complex Programmable Logic Device Common Public Radio Interface Call Processing Software Chipselect Digital to Analog Converter Device Driver Dynamic Host Configuration Protocol Domain Name Server SAMSUNG Electronics Co., Ltd. I ABBREVIATION E ECCB ECMB EIR EMTS eNB EPC EPS E-UTRA E-UTRAN eNB Call Control Block eNB Common Management Block Equipment Identity Register Element Maintenance Terminal Server Evolved UTRAN Node B Evolved Packet Core Evolved Packet System Evolved Universal Terrestrial Radio Access Evolved Universal Terrestrial Radio Access Network F FM FTP G GPRS GTP GTPB GTP-U GW H HA HARQ HSS HTTP IPC IPRS IPSec I L L9CA L9VU L9FU L9DB LAG LKC LOG LSM LSS LTE Fault Management File Transfer Protocol General Packet Radio Service GPRS Tunneling Protocol GTP Block GPRS Tunneling Protocol - User Gateway High Availability Hybrid Automatic Repeat Request Home Subscriber Server Hypertext Transfer Protocol Inter Process Communication IP Routing Subsystem IP Security LTE eNB Channel card board Assembly LTE eNB Amp, Transceiver Unit LTE eNB Filter Unit LTE eNB Digital Backplane board assembly Link Aggregation Linux Kernel Core Log Management LTE System Manager LTE SON server Long Term Evolution II SAMSUNG Electronics Co., Ltd. MetroPCS User Manual/ED.00 M N O P Q R MAC MACB MIF MIMO MME MW NAS NP OAM OCS OFDM OFDMA OS PCEF PCRF PDCB PDCP PDN PDU P-GW PM PMIP QAM QoS RLC RLCB RRC Medium Access Control MAC Block Management Interface Multiple Input Multiple Output Mobility Management Entity Middleware Non Access Stratum Network Processing Operation and Maintenance Online Charging System Orthogonal Frequency Division Multiplexing Orthogonal Frequency Division Multiple Access Operating System Policy and Charging Enforcement Function Policy Charging & Rule Function PDCP Block Packet Data Convergence Protocol Packet Data Network Protocol Data Unit PDN GW Performance Management Proxy Mobile IP Quadrature Amplitude Modulation Quality of Service Radio Link Control RLC Block Radio Resource Control SAMSUNG Electronics Co., Ltd. III ABBREVIATION S SC-FDMA SCTP SDMA SFN SFTP SGSN S-GW SM SNMP SOAP SSL SwM TL1 TM TRM UAMA UADU UCCM UDA UDP UE UTRAN UDA VLAN Web-EMT T U V W Single Carrier-Frequency Division Multiple Access Stream Control Transmission Protocol Spatial Domain Multiple Access System Fame Number Secure FTP Serving GPRS Support Node Serving GW Security Management Simple Network Management Protocol Simple Object Access Protocol Secure Socket Layer Software Management Transaction Language 1 Test Management Trace Management Universal platform (type A) Management board Assembly Universal platform (type A) Digital Unit Universal Core Clock Module User-Defined Alarm User Datagram Protocol User Equipment UMTS Terrestrial Radio Access Network User-Defined Alarm Virtual LAN Web based-Element Maintenance Terminal IV SAMSUNG Electronics Co., Ltd. MetroPCS User Manual 2010 Samsung Electronics Co., Ltd. All rights reserved. Information in this manual is proprietary to SAMSUNG Electronics Co., Ltd. No information contained here may be copied, translated, transcribed or duplicated by any form without the prior written consent of SAMSUNG. Information in this manual is subject to change without notice. MPE Information Warning: Exposure to Radio Frequency Radiation The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should not be less than 1100cm during normal operation. The gain of the antenna is 20.5 dBi. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAMSUNG Electronics Co., Ltd.
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2011-02-14 | 2135 ~ 2140 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2011-02-14
|
||||
| 1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0027908797
|
||||
| 1 | Physical Address |
19 Chapin Rd., Building D
|
||||
| 1 |
Pine Brook, New Jersey 07058
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
c******@ccsemc.com
|
||||
| 1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
A3L
|
||||
| 1 | Equipment Product Code |
SLS-2A30002100
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J****** C********
|
||||
| 1 | Title |
General Manager
|
||||
| 1 | Telephone Number |
973-8********
|
||||
| 1 | Fax Number |
973-8********
|
||||
| 1 |
j******@samsung.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
HCT CO.,LTD.
|
||||
| 1 | Name |
S**** L******
|
||||
| 1 | Physical Address |
San 136-1 Ami-ri, Bubal-eup, Icheon-si
|
||||
| 1 |
Kyungki-do, 467701
|
|||||
| 1 |
South Korea
|
|||||
| 1 | Telephone Number |
+82-3********
|
||||
| 1 | Fax Number |
+82-3********
|
||||
| 1 |
s******@hct.co.kr
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
HCT CO.,LTD.
|
||||
| 1 | Name |
S******** L******
|
||||
| 1 | Physical Address |
San 136-1 Ami-ri, Bubal-eup, Icheon-si
|
||||
| 1 |
Kyungki-do, 467701
|
|||||
| 1 |
South Korea
|
|||||
| 1 | Telephone Number |
+82-3********
|
||||
| 1 |
s******@hct.co.kr
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/31/2011 | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Evolved UTRAN Node-B Outdoor System | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output power listed above is maximum conducted dual chain combined and single chain. This device has 2T2R Spatial Multiplexing MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 11 meters based on use with 20.5 dBi antenna(s) and must be fixed-mounted on outdoor permanent structures. For other antennas, RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of section 1.1307(b)(3) of the Rules. Final radiated (EIRP) power is addressed at time of licensing according to 47CFR 27.50(d) and installation location. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
HCT Co., LTD
|
||||
| 1 | Name |
S******** L******
|
||||
| 1 | Telephone Number |
82-31********
|
||||
| 1 | Fax Number |
82-31********
|
||||
| 1 |
s******@HCT.co.kr
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 27 | MO | 2135 | 2140 | 120 | 0.0084 ppm | 4M49G7D | |||||||||||||||||||||||||||||||||
| 1 | 2 | 27 | MO | 2135 | 2140 | 60 | 0.0084 ppm | 4M49G7D | |||||||||||||||||||||||||||||||||
| 1 | 3 | 27 | MO | 2135 | 2140 | 120 | 0.0084 ppm | 4M49W7D | |||||||||||||||||||||||||||||||||
| 1 | 4 | 27 | MO | 2135 | 2140 | 60 | 0.0084 ppm | 4M49W7D | |||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC