FCC ID: A3LSMG736B Mobile Phone

Printed in Korea GH68-54628A Rev.1.0 English. 04/2022 SM-G736B/DS QUICK START GUIDE To view the user manual, scan the QR code. English Package contents Device USB cable Battery Quick start guide The items supplied with the device and their images may vary by region. Installing a nano-SIM card (sold separately) and battery Ensure that the back cover is closed tightly. Use only Samsung-approved back covers and accessories with the device. 1 2 1 Align Press 2 Ensure that the back cover is closed tightly to prevent water and dust from entering the device. Open or loose back cover may allow water and dust to enter the device and cause damage. 2 Accessing more information Visit www.samsung.com to view device information and more. To view the user manual, scan the QR code on the front cover. You may incur additional charges for accessing the Internet. E n g l i s h Safety information Read all safety information before using the device to ensure safe and proper use. You can view more safety information in the safety information menu of the Settings app. Follow the warnings below to prevent incidents, such as fires or explosions, injuries, or damage to the device Your device contains magnets. Keep a safe distance between your device and objects that may be affected by magnets such as credit cards and implantable medical devices. If you have an implantable medical device, consult your physician before use. Do not expose the device to physical impact or damage. Use only Samsung-approved batteries, chargers, and cables specifically designed for your device. Prevent the multipurpose jack and battery terminals from coming into contact with foreign materials such as metal, liquids, or dust. If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately. Use the device again only after it has been repaired at a Samsung Service Centre. Do not turn on or use the device when the battery compartment is exposed. Do not disassemble or reuse the battery. The device can be used in locations with an ambient temperature of 0 C to 35 C. You can store the device at an ambient temperature of -20 C to 50 C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the batterys lifespan. 3 To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods. This marking on the product, accessories or literature and without the bar on batteries indicates that the product, battery and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. For information on Samsungs environmental commitments and product regulatory obligations, e.g. REACH, visit our sustainability page available via www.samsung.com. Specific Absorption Rate (SAR) certification information Your device conforms to U.S. Federal Communications Commission

(FCC) standards that limit human exposure to radio frequency (RF) energy emitted by radio and telecommunications equipment. These standards prevent the sale of mobile devices that exceed a maximum exposure level (known as the Specific Absorption Rate, or SAR) of 1.6 W/kg. In normal use, the actual SAR is likely to be much lower, as the device has been designed to emit only the RF energy necessary to transmit a signal to the nearest base station. By automatically emitting lower levels when possible, your device reduces your overall exposure to RF energy. The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. Some devices are required to receive approval from the FCC. Follow the instructions on the website to use the FCC ID to find SAR values for the device. SAR information for this device can also be found on Samsungs website: www.samsung.com/sar. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. 4 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the mobile device if such interference cannot be eliminated. 5 The back cover may be loosened if the device is dropped or receives an impact. Ensure that all the covers are properly aligned and tightly closed. If the device has been immersed in water or the microphone or speaker is wet, sound may not be heard clearly during a call. It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting. Copyright 2022 Samsung Electronics Co., Ltd. 6

Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu Suwon-City, Gyeonggi-do, 16677, Korea Date: April 29, 2022 To Whom it May Concern We attest the following:

Subject :

U-NII 6 GHz Client Operation FCC ID:

A3LSMG736B 1. This device will only associate with a low power indoor AP for WIFI 6E operations. Hotspot Mode, ad-hoc and any other P2P service is disabled for WIFI 6E operations. This device will not connect directly to another client device using WIFI 6E frequencies. 2. This device will operate only under the control of an indoor access point, except for transmitting brief messages to an AP when attempting to join its network after detecting a signal that confirms that an access point is operating on a particular channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP, it will not continually repeat the request. 3. Transmissions will be lower or equal to the power advertised by the indoor low-power access point and never above the maximum output power allowed by the FCC grant. 4. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel:

1-973-808-6375

Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeontong-gu, Suwon-si, Gyeonggi-do, 16677, Korea MPR Attestation letter for LTE

- FCC ID : A3LSMG736B

- Model name : SM-G736B/DS, SM-G736B To Whom it May Concern We attest the following regarding FCC ID: A3LSMG736B 1. MPR is permanently implemented for all channel BWs, modulations, frequency bands and RB sizes. 2. A-MPR was disabled for all SAR test samples for SAR testing purposes only. 3. We confirm the specific MPR targets and tolerances shown in the SAR Report. All deviations in the power measurements from the specific MPR targets shown in the SAR Report are expected and within factory tolerances. 4. LTE Release 15 implementation is limited. The uplink does not support enhanced SC-FDMA. Features such as CoMP, HetNet, Relay, SON, cross carrier scheduling, eICIC, enhanced downlink MIMO, MBMS, M2M/D2 are also not supported. SVLTE is not supported as described in the operational description. 5. This device complies with FCC Part 27.75(a)(1) requirements: Mobile and portable stations that operate on any portion of frequencies in the paired 1755-1780 MHz and 2155-2180 MHz band must be capable of operating on all frequencies in the paired 1710-1780 MHz and 2110-2180 MHz band, using the same air interfaces that the equipment utilizes on any frequencies in the paired 1710-1780 MHz and 2110-2180 MHz band. 6. This device complies with FCC Part 27.77 requirements: Mobile and portable stations in the 1695-1710 MHz and 1755-1780 MHz bands may operate only when under the control of a base station. Base stations that enable mobile or portable equipment to operate in the 1695-1710 MHz and 1755-1780 MHz band are subject to prior coordination requirements. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Ms. Jenni Chun GGeeneral Manager Samsung Electronics CO. LTD TEL: 1-973-808-6375 E-mail: j1.chun@samsung.com