FCC ID: A3LSMG8850 Mobile Phone

by: Samsung Electronics Co Ltd latest update: 2018-05-22 model: SMG8850

Seven grants have been issued under this FCC ID from 05/01/2018 to 05/22/2018 (this is one of seven hundred and eighty-three releases in 2018 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked troubleshooting guides, drivers, password defaults, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 7 User Manual Users Manual pdf 5.80 MiB January 05 2018
1 2 3 4 5 6 7 Cover Letter(s) pdf
1 2 3 4 5 6 7 Cover Letter(s) pdf
1 2 3 4 5 6 7 Cover Letter(s) pdf
1 2 3 4 5 6 7 Cover Letter(s) pdf
1 2 3 4 5 6 7 Test Report pdf
1 2 3 4 5 6 7 Test Setup Photos pdf
1 2 3 4 5 6 7 Test Setup Photos pdf
1 2 3 4 5 6 7 RF Exposure Info pdf
1 2 3 4 5 6 7 RF Exposure Info pdf
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Setup Photos pdf January 05 2018
1 2 3 4 5 6 7 External Photos pdf January 05 2018
1 2 3 4 5 6 7 Internal Photos pdf January 05 2018
1 2 3 4 5 6 7 Cover Letter(s) pdf / January 05 2018
1 2 3 4 5 6 7 ID Label/Location Info pdf / January 05 2018
1 2 3 4 5 6 7 ID Label/Location Info pdf / January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Setup Photos pdf January 05 2018
1 2 3 4 5 6 7 RF Exposure Info pdf January 05 2018
1 2 3 4 5 6 7 RF Exposure Info pdf January 05 2018
1 2 3 4 5 6 7 RF Exposure Info pdf January 05 2018
1 2 3 4 5 6 7 RF Exposure Info pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Setup Photos pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 Test Report pdf January 05 2018
1 2 3 4 5 6 7 User Manual Users Manual pdf 5.80 MiB January 05 2018

frequency equipment class purpose
1 2018-05-22 2565 ~ 2645 PCE - PCS Licensed Transmitter held to ear Class II permissive change or modification of presently authorized equipment
2 2018-05-01 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2412 ~ 2462 DTS - Digital Transmission System
6 2565 ~ 2645 PCE - PCS Licensed Transmitter held to ear
7 2402 ~ 2480 DXX - Part 15 Low Power Communication Device Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 Effective 2018-05-22
1 2 3 4 5 6 7 2018-05-01
1 2 3 4 5 6 7 Applicant's complete, legal business name Samsung Electronics Co Ltd
1 2 3 4 5 6 7 FCC Registration Number (FRN) 0027908797
1 2 3 4 5 6 7 Physical Address 19 Chapin Rd., Building D
1 2 3 4 5 6 7 Pine Brook, New Jersey 07058
1 2 3 4 5 6 7 United States
app s TCB Information
1 2 3 4 5 6 7 TCB Application Email Address L******@ul.com
1 2 3 4 5 6 7 TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4 5 6 7 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
1 2 3 4 5 6 7 A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
app s FCC ID
1 2 3 4 5 6 7 Grantee Code A3L
1 2 3 4 5 6 7 Equipment Product Code SMG8850
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 Name J**** C****
1 2 3 4 5 6 7 Title General Manager
1 2 3 4 5 6 7 Telephone Number 973-8********
1 2 3 4 5 6 7 Fax Number 973-8********
1 2 3 4 5 6 7 E-mail j******@samsung.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)11/18/2018
1 2 3 4 5 6 7 10/28/2018
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 Equipment ClassPCE - PCS Licensed Transmitter held to ear
1 2 3 4 5 6 7 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 DTS - Digital Transmission System
1 2 3 4 5 6 7 DXX - Part 15 Low Power Communication Device Transmitter
1 2 3 4 5 6 7 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Mobile Phone
1 2 3 4 5 6 7 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 Modular Equipment TypeDoes not apply
1 2 3 4 5 6 7 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 7 Original Equipment
1 2 3 4 5 6 7 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 Grant CommentsClass II permissive change filing to add Uplink CA of LTE Band 41 by software as documented in this filing. This device supports Carrier Aggregation in the Uplink in band 41 with maximum aggregate bandwidths of 40MHz (20+20). Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. This device supports LTE bandwidths of: 5/10 MHz modes in Band 17; 5/10/15/20 MHz modes in Band 41; 1.4/3/5/10 MHz modes in Band 5 and Band 12; 1.4/3/5/10/15/20 MHz modes in Band 4. This device contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for U.S. operations. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) exposure conditions are 0.22 W/kg, 0.45 W/kg, 0.75 W/kg, 1.45 W/kg, and 1.91 W/kg, respectively.
1 2 3 4 5 6 7 Power output listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) exposure conditions are 0.52 W/kg, 0.55 W/kg, 0.83 W/kg, 1.45 W/kg, and 2.28 W/kg, respectively.
1 2 3 4 5 6 7 Output power listed is conducted. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.24 W/kg, <0.10 W/kg, <0.10 W/kg, and 1.45 W/kg, respectively.
1 2 3 4 5 6 7 Power output listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.79 W/kg, <0.10 W/kg, 0.19 W/kg, and 1.45 W/kg, respectively.
1 2 3 4 5 6 7 Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. This device supports LTE bandwidths of: 5/10 MHz modes in Band 17; 5/10/15/20 MHz modes in Band 41; 1.4/3/5/10 MHz modes in Band 5 and Band 12; 1.4/3/5/10/15/20 MHz modes in Band 4. This device contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for U.S. operations. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device and the user's body. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) exposure conditions are 0.22 W/kg, 0.45 W/kg, 0.73 W/kg, 1.45 W/kg, and 1.91 W/kg, respectively.
1 2 3 4 5 6 7 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 Firm Name HCT Co., Ltd.
1 2 3 4 5 6 7 Name L******** Y****
1 2 3 4 5 6 7 Telephone Number 82-31********
1 2 3 4 5 6 7 Fax Number 82-31********
1 2 3 4 5 6 7 E-mail y******@hct.co.kr
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 22H 824.2 848.8 0.514 2.5 ppm 248KGXW
1 2 22H 824.2 848.8 0.079 2.5 ppm 244KG7W
1 3 24E 1850.2 1909.8 0.589 2.5 ppm 248KGXW
1 4 24E 1850.2 1909.8 0.197 2.5 ppm 242KG7W
1 5 24E 1852.4 1907.6 0.096 2.5 ppm 4M14F9W
1 6 22H 826.4 846.6 0.049 2.5 ppm 4M15F9W
1 7 27 1717.5 1747.5 0.097 1 ppm 13M4G7D
1 8 27 1717.5 1747.5 0.081 1 ppm 13M5W7D
1 9 27 1720 1745 0.096 1 ppm 17M9G7D
1 1 27 1720 1745 0.08 1 ppm 18M0W7D
1 11 22H 829 844 0.054 1 ppm 8M99G7D
1 12 22H 829 844 0.047 1 ppm 8M99W7D
1 13 27 699.7 715.3 0.04 1 ppm 1M09G7D
1 14 27 699.7 715.3 0.033 1 ppm 1M09W7D
1 15 27 704 711 0.033 1 ppm 8M97G7D
1 16 27 704 711 0.025 1 ppm 8M97W7D
1 17 27 2560 2650 0.121 1 ppm 8M95G7D
1 18 27 2560 2650 0.101 1 ppm 8M97W7D
1 19 27 2565 2645 0.116 1 ppm 17M9G7D
1 2 27 2565 2645 0.097 1 ppm 17M8W7D
1 21 27 2565 2645 0.066 1 ppm 17M9W7D
1 22 27 2560 2650 0.112 1 ppm 23M1G7D
1 23 27 2565 2645 0.109 1 ppm 37M7G7D
1 24 27 2565 2645 0.096 1 ppm 37M7W7D
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15B 16 CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC 5180 5240 0.079
3 2 15E CC 5260 5320 0.079
3 3 15E CC 5500 5700 0.076
3 4 15E CC 5745 5825 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0111000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.0012
5 2 15C CC 2412 2462 0.0662
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 22H 824.2 848.8 0.514 2.5 ppm 248KGXW
6 2 22H 824.2 848.8 0.079 2.5 ppm 244KG7W
6 3 24E 1850.2 1909.8 0.589 2.5 ppm 248KGXW
6 4 24E 1850.2 1909.8 0.197 2.5 ppm 242KG7W
6 5 24E 1852.4 1907.6 0.096 2.5 ppm 4M14F9W
6 6 22H 826.4 846.6 0.049 2.5 ppm 4M15F9W
6 7 27 1717.5 1747.5 0.097 1 ppm 13M4G7D
6 8 27 1717.5 1747.5 0.081 1 ppm 13M5W7D
6 9 27 1720 1745 0.096 1 ppm 17M9G7D
6 1 27 1720 1745 0.08 1 ppm 18M0W7D
6 11 22H 829 844 0.054 1 ppm 8M99G7D
6 12 22H 829 844 0.047 1 ppm 8M99W7D
6 13 27 699.7 715.3 0.04 1 ppm 1M09G7D
6 14 27 699.7 715.3 0.033 1 ppm 1M09W7D
6 15 27 704 711 0.033 1 ppm 8M97G7D
6 16 27 704 711 0.025 1 ppm 8M97W7D
6 17 27 2560 2650 0.121 1 ppm 8M95G7D
6 18 27 2560 2650 0.101 1 ppm 8M97W7D
6 19 27 2565 2645 0.116 1 ppm 17M9G7D
6 2 27 2565 2645 0.097 1 ppm 17M8W7D
6 21 27 2565 2645 0.066 1 ppm 17M9W7D
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 13.56 13.56
7 2 15C CC 2402 2480

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC