all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL 1 OF 2 | Users Manual | 2.85 MiB | July 11 2005 / April 11 2005 | |||
1 |
|
USERS MANUAL 2 OF 2 | Users Manual | 2.84 MiB | July 11 2005 / April 11 2005 | |||
1 | Parts List/Tune Up Info | July 11 2005 / April 11 2005 | ||||||
1 | Block Diagram | July 11 2005 / April 11 2005 | ||||||
1 | Cover Letter(s) | July 11 2005 / April 11 2005 | ||||||
1 | External Photos | July 11 2005 / April 11 2005 | ||||||
1 | Internal Photos | July 11 2005 / April 11 2005 | ||||||
1 | ID Label/Location Info | July 11 2005 / April 11 2005 | ||||||
1 | Operational Description | July 11 2005 / April 11 2005 | ||||||
1 | Test Report | July 11 2005 / April 11 2005 | ||||||
1 | Test Setup Photos | July 11 2005 / April 11 2005 |
1 | USERS MANUAL 1 OF 2 | Users Manual | 2.85 MiB | July 11 2005 / April 11 2005 |
User Guide SAFETY CONCERNS For product safety and correct operation, the following information must be given to the operator/user and shall be read before the installation and operation. Conventions WARNING Provides information or instructions that you should follow in order to avoid personal injury or fatality. CAUTION Provides information or instructions that you should follow in order to avoid a service failure or damage to your phone. NOTE Indicates additional information for reference. Symbols Caution Indication of a general caution Restriction Indication for prohibiting an action for a product Instruction Indication for commanding a specifically required action 2 SAMSUNG Electronics Co., Ltd. WARNING Adapter Fixing Screw Connect the power adapter provided with the product, to the power connection port. Using adapters other than that provided may seriously damage the product or cause fire or electrocution. Insert power cord tightly and fully into the outlet. This is to prevent fires. Fix OfficeServ SOHO and power adapter by using screws after connecting the power adapter. Failing to do so can cause fire or electrocution. Be careful not to drop the product. This is to prevent product damage and injuries. Do not pull or excessively bend the power cord, and do not touch the power plug with wet hands. This prevents power cord damage, fire and electrocution. SAMSUNG Electronics Co., Ltd. 3 Do not use damaged power plugs and cords, or loose outlets. Failing to do so can cause fire or electrocution. Do not connect many devices to a single outlet. This is to prevent fires. Do not place the product in dusty areas or in environments with extreme thermal differences. Failing to do so can cause fire or electrocution. Do not place the product near items that can start a fire(e.g., cigarette fire, heaters). Failing to do so can cause fire or electrocution. Do not place the product under direct sunlight. The product may not operate properly due to damaged components. 4 SAMSUNG Electronics Co., Ltd. Grounding terminal Do not use or store inflammable sprays or material near the product. Failing to do so can cause fire or electrocution. Do not place vases, flowerpots, cups, cosmetics, or medicine, which contain water, near the product. Failing to do so can cause fire or electrocution. The power cable must be connected to an outlet equipped with a grounding terminal. This is to prevent fires and electrocution. Unplug the power cable when lighting and thunder is expected. This is to prevent fires and electrocution. If the product makes strange sound, smell, or smoke, unplug the cord immediately and contact the service center. Failing to do so can cause fire or electrocution. SAMSUNG Electronics Co., Ltd. 5 6 If dust or water is on the pin or the touching surface of the power plug, unplug the cord and clean the plug with cloth. If the substance cannot be cleaned, contact the service center. Failing to do so can cause fire or electrocution. Unplug the power cord when not using the product for a long time. This is to prevent fire or electrocution. To connect an external device(e.g., PC, modem, facsimile) to the product, turn off the power of both the product and the device before connecting the cable. This is to prevent fire or electrocution. Accurately install and properly use the product according to the user guide. This is to prevent malfunctions and reductions in product lifetime. Do not install the product on unstable places. This is to protect the product from falling. SAMSUNG Electronics Co., Ltd. CAUTION Do not place heavy items over the product. Components of the product can be damaged. Do not turn off the power while the product is upgrading its software. Turning off the power during upgrade will cancel the upgrade. Do not clean the product with chemicals such as wax, benzene, alcohol, thinner, insecticide, air freshener, and detergent. This is to protect the product from bleach or damage. Do not disassemble, repair, or modify the product without permission. Contact your dealer or the service center to repair the product. Do not connect the power cable to the improper AC power outlet. The power adapter type may be various depending on countries. The product may not operate normally if the voltage is improper. Clean the produce with a dry cloth after unplugging the power cord. This is to protect the product from damage. SAMSUNG Electronics Co., Ltd. 7 TABLE OF CONTENTS USAFETY CONCERNSU T 2 UConventionsU USymbolsU UWARNINGU UCAUTIONU T................................................................................................................2 T.......................................................................................................................2 T ....................................................................................................................3 T .....................................................................................................................6 UPREPARATIONU T 13 UMain FeaturesU UProduct ContentU UFront PanelU T ...........................................................................................................13 T .......................................................................................................15 T................................................................................................................16 UINSTALLATIONU T 18 UEnvironment DescriptionU UNetwork Configuration DiagramU T.........................................................................................19 T....................................................................................... 19 UCheck the following network environment:U T ...................................................................... 20 UChecking External Network Environment of UserU T............................................................ 21 UOfficeServ SOHO Connection (ISDN Type)U UOfficeServ SOHO Connection (PSTN Type)U UEasy Installation of OfficeServ SOHOU T............................................................22 T...........................................................24 T ....................................................................25 T ...................................................................................................................... 26 UEasy InstallU UConnecting OfficeServ SOHO with Desktop / Laptop Computers U UConnecting Desktop / Laptop Computer to OfficeServ SOHO WirelesslyU T ......................30 T ....................... 30 UConnecting Desktop / Laptop Computer to OfficeServ SOHO by LAN CableU T.................. 32 UTHINGS YOU SHOULD KNOWU T 34 UScreensU T......................................................................................................................34 T .................................................................................................................... 34 UMain ScreenU 8 SAMSUNG Electronics Co., Ltd. T T T T T T T T T T T T T T T T T T T T T T T T UStation Status Display ScreenU T.......................................................................................... 35 UMenus During Call ScreenU T............................................................................................... 35 UMenu ScreenU T ................................................................................................................... 36 UEntering CharactersU USelecting Entry ModeU T .................................................................................................36 T ...................................................................................................... 37 UEntering CharactersU T......................................................................................................... 37 UEntering NumbersU T............................................................................................................ 38 UEntering Special CharactersU T ............................................................................................ 38 UMAKING CALLSU T 39 UBefore Making a CallU UCalling MethodU T ................................................................................................39 T................................................................................................................. 39 UMaking Intercom CallsU UMaking an Intercom CallU T .............................................................................................40 T.................................................................................................. 40 UCallbackU T........................................................................................................................... 43 UMaking External CallsU T ..............................................................................................44 T................................................................................................... 44 UMaking an External CallU UMaking Calls Using PauseU UAuto RedialU T............................................................................................... 47 T ...................................................................................................................... 48 UCALLBACK (CCBS / CCNR) (ISDN Only)U T....................................................................... 49 UNew Call (PSTN Only)U T..................................................................................................... 50 UMaking Intercom / External CallsU UDialing The Most Recent Dialed NumberU T............................................................................50 T......................................................................... 50 UDialing Using Recent Call LogU T ......................................................................................... 51 USpeed DialingU T .................................................................................................................. 52 UDialing Numbers Saved in [M](Memory) ButtonU T............................................................... 53 UDialling using the PhoneBookU T.......................................................................................... 54 UANSWERING CALLSU T 55 UBefore Answering CallsU UAnswering MethodU T ...........................................................................................55 T........................................................................................................... 55 UCall Refusal / Call DeflectionU T ........................................................................................... 56 SAMSUNG Electronics Co., Ltd. 9 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T UAnswering Intercom CallsU UAnswering from OfficeServ SOHOU T .......................................................................................57 T .................................................................................. 57 UAnswering from WLAN phoneU T ......................................................................................... 58 UAnswering External CallsU UAnswering from OfficeServ SOHOU T ........................................................................................59 T .................................................................................. 59 UAnswering from MobileU T .................................................................................................... 60 UCall Pick UpU T...............................................................................................................61 UFUNCTIONS USED DURING CALLSU T 62 UDuring Intercom CallU T ................................................................................................62 T .................................................................................................................... 62 UCall TransferU UMuteU T ................................................................................................................................ 63 UDuring External CallsU T ...............................................................................................64 T .................................................................................................................... 64 UCall TransferU UTrunk FlashU T...................................................................................................................... 65 UKEYPAD facility (ISDN Only)U T ........................................................................................... 66 UMalicious call tracing (malicious call identification, MCID)(ISDN Only)U T............................ 66 UParking a call (ISDN Only)U T............................................................................................... 67 UCall WaitingU T ..................................................................................................................... 67 UConference during Intercom / External CallsU T ........................................................68 UCONVENIENT FEATURESU T 69 UCalling Line Identification Presentation (CLIP)U UConferenceU T .....................................................69 T................................................................................................................70 T ........................................................................................................... 70 UGroup ConferenceU UEach ConferenceU T............................................................................................................. 71 UDo Not Disturb (DND)U T...............................................................................................72 T..................................................................................................................... 72 USetting DNDU UCanceling DNDU T................................................................................................................ 73 UGroup ListeningU T........................................................................................................74T SAMSUNG Electronics Co., Ltd. 10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T UMENUU 75 UMain MenuU .................................................................................................................75 USMSU............................................................................................................................77 UInboxU................................................................................................................................ 78 UOutboxU............................................................................................................................. 78 UTemplatesU ........................................................................................................................ 80 USMS SettingsU................................................................................................................... 81 UPhoneBookU................................................................................................................83 UFind NumberU.................................................................................................................... 83 UOutgoing CallU................................................................................................................... 86 UIncoming CallU................................................................................................................... 86 UMissed CallU ...................................................................................................................... 87 UNew EntryU........................................................................................................................ 87 UEdit GroupU ....................................................................................................................... 88 URegister Memory ButtonU.................................................................................................. 88 UDelete AllU ......................................................................................................................... 89 UE-DiaryU .......................................................................................................................90 UWakeup CallU .................................................................................................................... 90 UAlarmU ............................................................................................................................... 91 USchedulerU ........................................................................................................................ 91 UMemoU .............................................................................................................................. 92 UCalculatorU ........................................................................................................................ 92 UWorld TimeU ...................................................................................................................... 93 UD-DayU .............................................................................................................................. 93 UUnit ChangeU..................................................................................................................... 94 USoundU.........................................................................................................................95 URing ToneU ........................................................................................................................ 95 UKeyToneU........................................................................................................................... 95 UVolumeU............................................................................................................................. 96 UServicesU.....................................................................................................................97 UPhone SetupU..............................................................................................................99 UMy PhoneU ........................................................................................................................ 99 SAMSUNG Electronics Co., Ltd. 11 UMobile SetupU.................................................................................................................. 103 Ua/b port SetupU ................................................................................................................ 104 UNetwork SetupU ............................................................................................................... 106 UGlobal SetupU...................................................................................................................110 UResetU ..............................................................................................................................117 UEasy InstallU .....................................................................................................................118 UAuto AttendantU ................................................................................................................118 UVoIP SetupU..................................................................................................................... 120 ULeast Cost RoutingU ........................................................................................................ 124 UTROUBLESHOOTINGU UWEB MANAGEMENTU 125 127 UWhat is Web Management System? U .....................................................................127 ULoginU........................................................................................................................128 UDataU..........................................................................................................................130 UNetworkU ......................................................................................................................... 130 UWLANU ............................................................................................................................ 134 USecurityU.......................................................................................................................... 136 UTelephone & PhonebookU ............................................................................................... 142 UEaasy InstallU .................................................................................................................. 143 UDB ConfigU ...................................................................................................................... 143 UUpgradeU......................................................................................................................... 144 UPasswordU....................................................................................................................... 144 UStatusU............................................................................................................................. 145 UANNEXU 146 UWhat is OfficeServ SOHO CRM?U...........................................................................146 USpecificationU ...........................................................................................................147 12 SAMSUNG Electronics Co., Ltd. PREPARATION Main Features Wide LCD Screen Convenient Direction Button Easy Installation Redial Various functions of the phone are shown on the LCD. Users can use functions easily by finding and selecting a menu from the LCD screen. Users can use the direction button to move between menus or to select a menu. The installation wizard enables users to easily set the time and network mode and to easily register WLAN phone. Users can redial a number selected from the call list. In addition, the auto-redial function repeatedly attempts connection to a busy line for a certain time period. SAMSUNG Electronics Co., Ltd. 13 Users can put the caller on hold to attend to an urgent matter or to connect another line, and can later reconnect to the original caller. Hold DND Users can use the DND(Do Not Disturb) function to prevent the phone from ringing even if a call arrives. Wireless Data Service This product supports interface with communication devices(e.g., PC, PDA) that include WLAN modules, enabling data communication service via wireless LAN. Clean Office Wireless data service enables a clean office without cables. No Power Operation 14 You can make or receive external calls using the handset even during power failures.(Only PSTN 1 is supported. However, other functions will be disabled.) SAMSUNG Electronics Co., Ltd. Product Content After purchasing this product, check if the items below are all included in the package. If an item is missing or is damaged, contact your dealer. The cable type and quantity may be various depending on countries. OfficeServ SOHO WIP-5000M LAN Cable Dual-Modular Phone Cables(2) WIP-5000M WLAN phone Charger 4-Port Phone Jack Cables(2) Battery
(1 Standard Type) OfficeServ SOHO Power Adapter Power Adapter Fixing Screw(1) User Guide Quick Installation Guide User Guide WIP-5000M Mobile Phone For descriptions on the WIP-5000M WLAN phone, provided with OfficeServ SOHO, refer to the WIP-5000M User Guide. SAMSUNG Electronics Co., Ltd. 15 Front Panel Buttons on the front panel of the OfficeServ SOHO are described below:
Name LCD Screen M1~M4(Memory) Button Dial Button Speaker Button Internal Call Button Button
Function Display the status, phone number, menu, and various massages. Frequently used numbers are saved as Memory buttons. Button used for entering numbers and characters. Button used for making calls through the speakerphone. Used for making internal calls. 16 SAMSUNG Electronics Co., Ltd. Name Mute Button Services Button R Button Volume Button PhoneBook Button Cancel Button End Button Direction Button/
OK Button Send Button Menu Button Button Function Used to switch off the microphone. Button used for Special Services according to Service Provider. Button used for holding/transferring a connected call. Button used for adjusting the ring volume. Button used for adjusting the volume during a call. Button used for viewing the phonebook.
- Used when moving to the previous step in menu mode.
- Used to exit the menu mode.
- Used to delete an entered character/number after the character/number is entered.
- Used when terminating a call during a call.
- Used to exit the menu mode.
- Direction button: Used when editing characters/numbers or moving a menu item.
- OK button: Used when selecting/saving the item where a cursor is in the menu mode.
- Used when making a call(Press [Send] button after entering number.)
- Used for checking recent outgoing/incoming(including no answer) call or for dialing the corresponding number.
- Used when receiving an incoming call.
- Used when pressing the dial button for over a certain time period to make a call to the most recent dialed number.
- Press the send button in a standby state to retrieve the list of recent calls. Used for using menu functions such as: SMS, PhoneBook, E-Diary, Sound, Services, Phone Setup. SAMSUNG Electronics Co., Ltd. 17 INSTALLATION The installation procedure of OfficeServ SOHO is described below:
1 Check Installation Environment
- Check network configuration
- Check connecting system of internal/external network 2 OfficeServ SOHO connect
- Basic Connection: Handset, trunk cable, Internet cable, and Power cable
- Option: FAX and PC or PDA 3 Configure Network
- Mandatory Setting: Time, date
- Network Mode setting
- Register WLAN phone 4 Configure User PC Configure Network Environment of User PC
(Windows 98/ME, Windows 2000, Windows XP) 18 SAMSUNG Electronics Co., Ltd. Environment Description This section describes the user environment before installing OfficeServ SOHO. Network Configuration Diagram The network configuration diagram of OfficeServ SOHO is shown below:
FAX PC Internal Network Configuration WLAN phone PSTN or IDSN
(C.O. line) External Network Configuration Internet External Modem
(xDSL/Cable)/LAN Wireless Internet
(IEEE802.11 b/g) Laptop Computer PDA Enter a same value for the SSID of mobile device to configure a single wireless cell. SAMSUNG Electronics Co., Ltd. 19 Check the following network environment:
1. PC Environment:
Check the type of OS(e.g., Windows 95/98/ME/2000/XP) of the PC and whether a LAN card is equipped on the PC. The Internet setup procedure differs depending on the type of OS. There are two ways to check the type of OS. Clicking [Start] will open a menu tab. You can verify the version from the Windows information displayed on the left section of the menu tab. Right click [My Computer] on your desktop and select [Properties] to check the system information. 2. LAN Environment of PC:
The OfficeServ SOHO can be connected only to PCs that have a LAN card. Check if a LAN/WLAN card is equipped on the PC. 3. Types and number of terminals
- Mobile terminal: WLAN phone(WIP-5000M), Laptop computer, PDA
- Wired terminal: PC, FAX 4. External Network:
Check the connecting method and network information(Refer to the next page). 20 SAMSUNG Electronics Co., Ltd. Checking External Network Environment of User Check the external network environment of the user before installing OfficeServ SOHO. When using static IP When using a static IP assigned by the ISP, set to Static, and enter the assigned IP address, gateway, subnet mask, and DNS address. When using dynamic IP If your ISP supports DHCP or you are connecting through a dynamic IP address, set to DHCP. Once the DHCP is set, an IP address is automatically assigned to OfficeServ SOHO. When using an IP address assigned through user ID and password If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE and enter the user ID and password provided by the ISP instead of entering an IP address, gateway, subnet mask, and DNS address. When using an IP address assigned through a PPTP server of ISP PPTP is used instead of PPPoE by some European ISPs. Enter the server address, ID, and password. SAMSUNG Electronics Co., Ltd. 21 OfficeServ SOHO Connection (ISDN Type) Before proceeding with the installation of the OfficeServ SOHO please read carefully the instructions below:
LAN PC ISDN FAX SLT or Turn off the power of the external modem, OfficeServ SOHO, and PC(or facsimile) before installation. 1. Handset Connection:
Connect the handset to the connection port on the left side of the OfficeServ SOHO. 2. ISDN Network Connection:
Connect the BRI to the ISDN port of the OfficeServ SOHO by using the ISDN access cable. 22 SAMSUNG Electronics Co., Ltd. 3. Single Line Telephone Connection:
Connect the facsimile, Answering Device or Single line Telephone to the port of the OfficeServ SOHO by using a phone cable.(RJ-11). 4. PC Connection:
Connect the LAN port of the PC to the LAN port of the OfficeServ SOHO by using a LAN cable.(RJ-45). 5. LAN Connection:
Connect the LAN port of the external modem to the WAN port of the OfficeServ SOHO by using a LAN cable.(This is not applicable to an internal ADSL modem.) 6. Power Connection:
Connect the power port of the OfficeServ SOHO to the power outlet by using a power adapter for +5 V. After installation, turn on the power of the external modem, OfficeServ SOHO, and PC(or facsimile) in sequence. SAMSUNG Electronics Co., Ltd. 23 OfficeServ SOHO Connection (PSTN Type) Before proceeding with the installation of the OfficeServ SOHO please read carefully the instructions below:
LAN PC PSTN FAX SLT or Turn off the power of the external modem, OfficeServ SOHO, and PC(or facsimile) before installation. 1. Handset Connection:
Connect the handset to the connection port on the left side of the OfficeServ SOHO. 2. Single Line Telephone Connection:
Connect the facsimile, Answering Device or Single line Telephone to the port of the OfficeServ SOHO by using a phone cable.(RJ-11). 3. PSTN Line Connection:
Connect the L1(Line1), L2(Line2) to the analog trunk port of the OfficeServ SOHO by using the RJ-11 dual moduala cable.S 24 SAMSUNG Electronics Co., Ltd. 4. PC Connection:
Connect the LAN port of the PC to the LAN port of the OfficeServ SOHO by using a LAN cable.(RJ-45). 5. LAN Connection:
Connect the LAN port of the external modem to the WAN port of the OfficeServ SOHO by using a LAN cable.(This is not applicable to an internal ADSL modem.) 6. Power Connection:
Connect the power port of the OfficeServ SOHO to the power outlet by using a power adapter for +5 V. After installation, turn on the power of the external modem, OfficeServ SOHO, and PC(or facsimile) in sequence. Easy Installation of OfficeServ SOHO Once the power of the OfficeServ SOHO is turned on, the green LEDs of the [Internal Call]
and [Mute] buttons on the front panel of the OfficeServ SOHO blink in turns. Within a short time, the loading screen and the [EasyInstall] screen will appear in sequence on the LCD of the OfficeServ SOHO. The use of the buttons for menu settings is described below:
Button Description Button Description The [OK] button is used after text is entered or to set the menus. The [Cancel] button is used to delete entries or to return to the previous step. The direction buttons are used to move the cursor left or right or to search the menus. The direction buttons are used to move the cursor up or down. Press the [OK] button to move to the next step after the menu settings or press the [Cancel]
button to return to the previous step. In case of problems with the Internet connection or with the registration of a WLAN phone, please refer to the Troubleshooting section in User Guide. The procedure for easy installation of the OfficeServ SOHO is as follows:
SAMSUNG Electronics Co., Ltd. 25 Easy Install Start Easy Install Connect the Internet cable(LAN cable) to the OfficeServ SOHO and press [OK] to start the installation. Time Setup: This is only for PSTN Type (Model: SIT200EM) Enter the current date and time and press [OK]. 26 SAMSUNG Electronics Co., Ltd. Network Mode 1. PPPoE 2. Static 3. DHCP or button to select your Internet service system among PPPoE, Static, Use the DHCP, and Setup Later, and press [OK]. Items are described below:
Select this item if you are a PPPoE user. Enter the ID and Password provided by the ISP and press [OK]. Contact your ISP if you have forgotten the ID or password. Select this item if you are a Static IP user. Enter the address provided by ISP and press [OK]. IP: Enter IP address SN: Enter Subnet Mask GW: Enter Gateway address DNS: Enter DNS(Domain Name Server) address Select this item if you are a DHCP user. Press [OK] to set up the Internet automatically. 4. Setup Later To skip Internet setup, select this item and press [OK]. SAMSUNG Electronics Co., Ltd. 27 ISDN Settings (This is only for ISDN Type (Model: SIT200EI)) 5. DDI 6. P-MP Multinumber Use the navigation button Select the ISDN connection mode between DDI and P-MP Multinumber and press [OK]. The items are described below:
to or Select this item if you have a point-to-point ISDN subscription. Enter your main telephone number
(e.g., 0292189777) and select the destination of the incoming calls, then press [OK]. ISDN subscription. Select this item if you have a point-to-multipoint Enter the main telephone number and if necessary any additional telephone number
(e.g., 0292189765) and select, per each of them, the destination of the incoming calls, by pressing
[OK] to confirm each entry. To continue, once the ISDN setting procedure is concluded, select Go to CLIP Settings and press [OK]. 28 SAMSUNG Electronics Co., Ltd. CLIP Settings (This is only for ISDN type (Model: SIT200EI)) Register WLAN phone Enter, per each extension, the telephone number, among those received from your network operator(e.g.,: 0292189765), that you want to display to the person called. To continue, select Go to WLAN settings and press [OK]. Enter a 13 characters WEP key Entering a WEP key(Wireless Equivalence Privacy) is optional. To skip this entry, press the [OK] button. Turn on the WLAN WIP-5000M phone and press the [OK] button of the OfficeServ SOHO. to the procedure described in the section Easy Register the WLAN WIP-5000M phone according Registration(38page) inherent to the WIP-5000M and press [OK]. SAMSUNG Electronics Co., Ltd. 29 Connecting OfficeServ SOHO with Desktop /
Laptop Computers You can use the Internet on a desktop or a laptop computer using OfficeServ SOHO. You can connect a desktop or a laptop computer to OfficeServ SOHO in a wireless method(using a WLAN card) or in a wired method(using a wired LAN card and a LAN cable). Connecting Desktop / Laptop Computer to OfficeServ SOHO Wirelessly
- A wireless connection can be made only if a WLAN card is installed in the desktop or laptop computer. If a wired LAN card is installed, refer to the wired connection method.
- You can set up a WLAN by using an extra program provided by the WLAN card manufacturer. It is recommended that you configure the WLAN using such program. For information on how to set up a WLAN, refer to the user guide of the program.
- You can also set up a WLAN by using the WLAN connection service of Windows XP. Setting up a WLAN in Windows 2000/ME/98 Windows 2000/ME/98 do not provide WLAN setting menus. Use programs provided by the manufacturer to set up a WLAN. Checking Windows Version Here are two ways to check the version(e.g. Windows XP, Windows 2000, Windows 98) of the Windows OS running on your computer
- Clicking [Start] will open a menu tab. You can verify the version from the Windows information displayed on the left section of the menu tab.
- Right click [My Computer] on your desktop and select [Properties] to check the system information. 30 SAMSUNG Electronics Co., Ltd. Using WLAN Card Program A WLAN card or a WLAN adapter is provided with an extra program for WLAN setup. To set up a WLAN, refer to the user guide of the program. Enter the same SSID set in the OfficeServ SOHO. To check the SSID of the OfficeServ SOHO, refer to the procedure described in the Note paragraph on the next page. Wireless Laptop Network Configuration 1. Click [Start] to select [Control Panel]. 2. Double-click [Network Connection] in Control Panel. If the Control Panel does not have [Network Connection], select [Switch to Classic View]
at the upper left corner of the Control Panel. 3. If [Wireless Network Connection] is set to [Disabled], right-click [Wireless Network Connection] and select [Enabled]. Even if a message, A wireless connection is not available appears after selecting
[Enabled], proceed to the next step. 4. Right-click [Wireless Network Connection] to select [Properties], and select
[Show icon in notification area when connected]. Click [OK]. 5. Right-click [Wireless Network Connection] and select [View Available Wireless Networks]. 6. From the list of [View Available Wireless Networks], select the same SSID of OfficeServ SOHO. To check the SSID of the OfficeServ SOHO, refer to the procedure described in the NOTE below. Select [Allow Access to the Selected Wireless Network Regardless of Security] and click the [Connect] button. Verifying SSID From the OfficeServ SOHO, press [Menu]
[2. WLAN Setup]
[Enter Password(default: 0000)] [OK] [4. WLAN Information] to verify the SSID. SAMSUNG Electronics Co., Ltd. 31 Connecting Desktop / Laptop Computer to OfficeServ SOHO by LAN Cable If the computer has been connected to the Internet before, additional setting is not required. Check the Internet connection(LAN cable status) by referring to OfficeServ SOHO connection, and execute the Internet Explorer. If the computer is not connected to the Internet, follow the steps below:
For Windows 98/ME 1. Select [Start] [Settings] [Control Panel] [Network]. 2. Double-click [TCP/IP]. 3. Select Obtain an IP address automatically and click [OK]. Restart the computer. For Windows 2000 1. Select [Start] [Settings] [Control Panel] [Network and Dial-up Connections]. 2. Right-click [Local Area Connection] and select [Properties]. 3. Double-click [Internet Protocol(TCP/IP)]. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically and click [OK]. 32 SAMSUNG Electronics Co., Ltd. For Windows XP 1. Press [Start] and select [Control Panel]. 2. Double-click [Network Connection]. 3. Right-click [Local Area Connection] and select [Properties]. 4. Double-click [Internet Protocol(TCP/IP)]. 5. Select [Obtain an IP address automatically] and [Obtain DNS address automatically]. Click [OK] to finish the setting. SAMSUNG Electronics Co., Ltd. 33 THINGS YOU SHOULD KNOW Screens Major screens that are displayed on the LCD of OfficeServ SOHO are described below:
Main Screen The default background screen of the main screen is shown below. The background screen can be changed by pressing [Menu] button and selecting
[Phone Setup] [1. My Phone] [1. Select Background]. Icons of the background screen are described below:
Icon Function Station Message Call forward Answer mode DND Mute Alarm Message Network connection 34 SAMSUNG Electronics Co., Ltd. Station Status Display Screen You can display this screen by pressing the [SCREEN] button while in standby mode or during a call. Statuses of stations and DND, and System Speed Dial are displayed as icons. You can use a function by moving to the corresponding menu and pressing the [OK] button.
<PSTN Type>
<ISDN Type>
Menus During Call Screen You can display menus available during a call by pressing the [Menu] button. Various functions that can be used during a call are displayed in this screen. You can use a function by moving to the corresponding menu and pressing the [OK] button. Menus Displayed During a Call Available menus may differ depending on the system version. You can use direction buttons to view menus that are not shown on the screen. RETRY menu is not displayed during intercom calls. SAMSUNG Electronics Co., Ltd. 35 Menu Screen You can display the Menu screen by pressing the [Menu] button while the OfficeServ SOHO is in standby mode. The Menu screen displays PhoneBook, E-Diary, Message, Conference, Phone Setup, and WLAN functions as icons. This menu may be different according to the country. Entering Characters You can use the dial button and the [Menu] button of OfficeServ SOHO to enter or edit letters, numbers, and special characters. MENU Button Dial Button 36 SAMSUNG Electronics Co., Ltd. Selecting Entry Mode Press the [Menu] button when the character input screen appears. Repeat pressing
[Menu] button until the cursor moves to the desired entry mode.
: Capital Alphabet
: Small Alphabet
: Number
: Special Character Character Entry Mode Character entry mode is set to Capital Alphbet by default. Entering Characters 1. Press the [Menu] button and select the capital/small alphabet mode. 2. Press the dial button to enter or edit characters.
(For uppercase) Dial Button Character Dial Button Character Dial Button Character G H I P Q R S
* / . A B C J K L T U V space D E F M N O W X Y Z
SAMSUNG Electronics Co., Ltd. 37
(For lowercase) Dial Button Character Dial Button Character Dial Button Character g h i p q r s
* / . a b c j k l t u v space d e f m n o w x y z
Entering Numbers Select number entry mode by pressing [Menu] button, and press the corresponding dial button. Entering Special Characters 1. Press the [Menu] button and select the special character mode. Available special characters will appear below the entry screen. 2. Press direction buttons to select a special character and press direction buttons to select another type of
[OK] button. Press special character. Entering Characters
- If the character to be entered is same as the character immediately entered, press the
- Press the
- To enter a space between two characters already entered, press the button and move the cursor one space to the right. button to enter a space. direction button to move to the character that should be right after the space and press the [0] button.
- Press the [C] button to erase an entered character. Press the [C] button briefly to erase characters one by one, or press and hold the button to erase all characters. 38 SAMSUNG Electronics Co., Ltd. MAKING CALLS Before Making a Call The means and features for making calls are summarized in the table below. For procedures on using the functions, refer to the corresponding descriptions. Category Intercom Call External Call Call method Feature Handset, speakerphone
- Making intercom calls
- Callback
- Making external calls
- Auto Redial
- Callback
- New Call
- Dialing the most recent dialed number
- Dialing using the recent call log
- Speed dialing
- Dialing numbers saved in [M](memory) button
- Dialling using the PhoneBook
- Dialling using the LCR function Calling Method Calls can be made by using the handset or speakerphone. Using Handset Lift the handset and enter the phone number. Then press [Send] button. Using Speakerphone Press [Speaker] button, enter a phone number, and then press [Send] button without lifting the handset to make a call. Listen to the voice and speak to the microphone. Press [Speaker] button again to end the call. You can lift the handset while speaking through the speakerphone to continue the call by using the handset. 39 SAMSUNG Electronics Co., Ltd. Making Intercom Calls This section describes how to make an internal call. Making an Intercom Call This function is used for making an internal call from OfficeServ SOHO to a WLAN phone or vice versa. Calling From OfficeServ SOHO to WLAN phone 1. Lift the handset. Press [Speaker] button to speak through the speakerphone. 2. Press the number of the recipients station. 3. Press the [Send] button. A connecting tone will be played. 4. Start conversation when the recipient answers. 40 SAMSUNG Electronics Co., Ltd. Calling from WLAN phone to OfficeServ SOHO or to Another WLAN phone 1. Press the number of the recipients station. 2. Press the [Send] button to hear a connecting tone. 3. Start conversation when the recipient answers. Calling from a/b port phone to OfficeServ SOHO or to WLAN phone 1. Lift the handset of the a/b port Phone 2. Press the number of the recipients station. 3. Start conversation when the recipient answers. SAMSUNG Electronics Co., Ltd. 41 Calling from [Station Status Display Screen] of OfficeServ SOHO 1. Press the [Internal Call] button while the phone is in standby mode. 2. Select a WLAN phone from the Station Status Display Screen. 3. Press the [OK] button to dial the selected station. In case an unregistered WLAN phone is selected the Plug out message appears.
<PSTN Type>
<ISDN Type>
42 SAMSUNG Electronics Co., Ltd. Callback When you make an internal call but if the recipient is busy, you can reserve a call on the recipients station. 1. If you hear a busy tone on making a call, press
[Menu] button and select [CALLBACK]. 2. On hearing the confirmation tone, replace the handset. 3. Your phone rings when the recipient finishes the earlier call. A message indicating callback is displayed on the LCD. 4. Lift the handset and the recipients station will ring. 5. Start conversation when the recipient answers. SAMSUNG Electronics Co., Ltd. 43 Making External Calls This chapter describes how to make an external call from OfficeServ SOHO or a WLAN phone. Making an External Call This function is used for making an external call from OfficeServ SOHO or a WLAN phone. Calling from OfficeServ SOHO Please Dial 1. Lift the handset. Press [Speaker] button to call through the speakerphone. 2. When the Please Dial message appears on the LCD, enter the recipients number. 3. Start conversation when the recipient answers. 44 SAMSUNG Electronics Co., Ltd. Calling from Mobile 1. Enter an external phone number. 2. Press the [Send] button to hear a connecting tone. 3. Start conversation when the recipient answers. SAMSUNG Electronics Co., Ltd. 45 Calling from a/b port phone Please Dial 1. Lift the handset of a/b port phone. 2. Enter the Trunk Access Number first, and enter the recipients number. 3. Start conversation when the recipient answers. 46 SAMSUNG Electronics Co., Ltd. Making Calls Using Pause You can use the pause function when making a call from the OfficeServ SOHO or from a WLAN phone to an Automatic Response System(ARS). Pause Function Pause function refers to using the pause character when dialing numbers for making a call to an Automatic Response System(ARS) such as telebanking. Note that some ARS may not be able to recognize electronic dialing. 1. Enter an ARS number(e.g., Telebanking). 2. Press [Menu] and enter the pause character p. 3. Enter the function numbers to be used for the ARS. 4. Press [Send] to connect to the ARS and to automatically execute the functions corresponding to the entered function numbers. SAMSUNG Electronics Co., Ltd. 47 Auto Redial When you make an external call but if the recipient is busy, you can use this function to redial the same number periodically until the recipient answers the call. RETRY NEW CALL TRUNK FLASH
<PSTN Type>
USER BUSY RETRY
<ISDN Type>
1. If you hear a busy tone on making a call, press
[Menu] button and select [RETRY]. 2. Replace the handset and wait until the call is connected. The wait for redial message is displayed on the LCD, and the number is redialled periodically. If the recipient continues to be on the phone, auto redial will be performed up to 99 times, and then the auto redial mode will be released. 3. When the recipient answers the call, lift the handset or press the [Speaker] button to start conversation. The Speaker LED is blinked until answering the call. Canceling Auto Redial To cancel the auto redial function, press dial button, [Speaker] button or lift and replace the handset. SAMSUNG Electronics Co., Ltd. 48 CALLBACK (CCBS / CCNR) (ISDN Only) If the external called does not answer(CCNR) or is busy(CCBS), you can reserve the call pressing [CALL BACK] in soft menu. This function is serviced ISDN network. 1. Press [Menu] [CALL BACK], if the external called does not answer of is busy. 2. On hearing the confirmation tone, replace the handset. 3. When the called is IDLE state, OfficeServ SOHO is called the reserved number automatically. SAMSUNG Electronics Co., Ltd. 49 New Call (PSTN Only) This function allows you to make another call immediately after the current call. RETRY NEW CALL TRUNK FLASH 1. During a call, press [Menu] button and select
[NEW CALL]. 2. Press the target phone number on hearing the dial tone. Making Intercom / External Calls This chapter describes how to make an external or intercom call from OfficeServ SOHO or a WLAN phone. Dialing The Most Recent Dialed Number This function is used to dial the most recently dialed internal/external number. Long~
1. Press the [Send] button for at least 2 seconds. 2. Speak through the speakerphone or handset. 50 SAMSUNG Electronics Co., Ltd. Dialing Using Recent Call Log This function is used for making an internal or external call using a list of numbers recently dialed. 1. Press [Send] button while in standby mode. Press the [Send] button briefly to display the call log, or press and hold the button to dial the most recently dialed number. 2. Recently outgoing, incoming, and missed calls are each displayed up to 32 numbers. Use direction buttons and move to the intended number. Press the [OK] button to display the user name, registered to the phonebook, the call time, and call duration. 3. Press [Send] button to dial the selected number. 4. Speak through the speakerphone or handset. SAMSUNG Electronics Co., Ltd. 51 Speed Dialing By registering frequently used numbers to dialing buttons, you can dial a phone number conveniently only by pressing the corresponding dialing button without entering the full number. Dial buttons must be kept pressed to dial corresponding numbers. 1. While in standby mode, press and hold the last one of the speed dial buttons registered in the phonebook for at least 2 seconds. 2. A call is made to the corresponding phone number and the recipients phone rings. 3. Start conversation when the recipient answers. Registering Speed Dial Number For procedure on registering a speed phone number, a speed phone number, refer to the PhoneBook section of MENU. 52 SAMSUNG Electronics Co., Ltd. Dialing Numbers Saved in [M](Memory) Button By registering a frequently used number to memory button, you can dial the number conveniently only by pressing the memory button without entering the full number. 1. Select the [M](Memory) button where the target number is saved. 2. A call is made to the corresponding phone number and the recipients phone rings. 3. Start conversation when the recipient answers. Registering a Phone Number to [M](Memory) Button For procedure on registering a number to a [M](memory) button, refer to the PhoneBook section of MENU. SAMSUNG Electronics Co., Ltd. 53 Dialing using the PhoneBook You can save the names of up to 250 contacts in your PhoneBook. You can search for the required telephone number using various criteria. 1.
[Menu] [Phone book] [1. Find Number]. Select the finding option. Options are By Name/ By Number/ By Location/ By Group/ By Time 2. Enter the information according to the option, and select the number, 3. Press [Send] button to dial the selected number. 4. Start conversation when the recipient answers. 54 SAMSUNG Electronics Co., Ltd. ANSWERING CALLS Before Answering Calls The means and features for answering calls are summarized in the table below. For procedures on using the functions, refer to the corresponding descriptions. Category Intercom Call External Call Call method Handset, speakerphone Function Answering intercom calls Answering external calls Call pickup Answering Method Calls can be answered by using the handset or speakerphone. Using handset Lift the handset to answer a call. Using speakerphone Press [Speaker] button without lifting the handset to answer a call. You can hear the callers voice(or the other partys voice) through speaker and speak through the microphone. Press the [Speaker]
button again to hang up. You can lift the handset while speaking through the speakerphone to continue the call by using the handset. SAMSUNG Electronics Co., Ltd. 55 Call Refusal / Call Deflection You can refusal or deflect the call you would not like to answer. 1. The base station is ringing. The display shows you the number of the caller. Select REFUSAL or DEFLECT. And press [OK]. 2. If you select the DEFLECT, Enter the station number you want the call diverted to. And press
# or [OK] button. If you press the *, it is cleared the number you enter. 56 SAMSUNG Electronics Co., Ltd. Answering Intercom Calls This function allows you to answer internal calls incoming to OfficeServ SOHO or a WLAN phone. Answering from OfficeServ SOHO Call from 11 1. On receiving a call, the bell rings and an incoming message is displayed on the LCD. 2. Lift the handset to answer the call. Press the [Speaker] button to speak through the speakerphone. 3. Replace the handset to disconnect the call. Press the [Speaker] button again when using the speakerphone. Answering from OfficeServ SOHO Press the [Vol] button while the bell is ringing to adjust the bell volume. If the volume is set to mute, an incoming message is displayed on the LCD but the bell does not ring. Auto Answering setting
- PSTN: [Menu] [Phone Setup] [1. My Phone] [1. Feature On/Off] [2.Auto Answer] [Auto Answer] Set to On
- ISDN: [Menu] [Phone Setup] [1. My Phone] [1. Feature On/Off]
[3.Auto Answer] Set the Internal to On. SAMSUNG Electronics Co., Ltd. 57 Answering from WLAN phone Call from 123456789 1. On receiving a call, the bell rings and an incoming message is displayed on the LCD. 2. Press the [Send] button to answer the call. 3. Press the [End] button to disconnect the call. 58 SAMSUNG Electronics Co., Ltd. Answering External Calls This section describes how to answer an external call. Answering from OfficeServ SOHO 1. On receiving an external call, the phone rings and a green lamp lights on the corresponding C.O. line button. Lift the handset to answer the call. Press the [Speaker] button to answer using the speakerphone. 2. Start conversation. 3. Replace the handset to disconnect the call. Press the [Speaker] button again when using the speakerphone. SAMSUNG Electronics Co., Ltd. 59 Answering from Mobile Call from 11 1. On receiving a call, the bell rings and an incoming message appears on the LCD. C 2. Press the [Send] button to answer the call. 3. Press the [End] button to disconnect the call. 60 SAMSUNG Electronics Co., Ltd. Call Pick Up This function is used to pick up a call incoming to another station. 1. When another station rings, press the [SCREEN]
button of your phone.
<PSTN Type>
<ISDN Type>
2. Select the flashing station number from the screen. 3. Start conversation. 4. Replace the handset to disconnect the call. Press the [Speaker] button again when using the speakerphone. SAMSUNG Electronics Co., Ltd. 61 FUNCTIONS USED DURING CALLS During Intercom Call This section describes some functions during intercom calls. Call Transfer This function is used for transferring a connected internal call to another intercom user or external user. HOLD Please dial 1. Press the [R] button during an internal call. 2. Press the destination number. 3. Replace the handset when the handset answers the call. Replace the handset while the transfer tone is ringing to transfer the call unconditionally. Otherwise, wait until the destination user answers the call to transfer the call after consulting the user. 62 SAMSUNG Electronics Co., Ltd. Mute When this function is used, you can hear what the other party is saying but the other party cannot hear any voice or sound from your phone. 1. Press [Mute] key during the call, [Mute] LED is changed to RED. Mute function is enable. 2. Press [Mute] key again, [Mute] LED is off. Mute function is disable. SAMSUNG Electronics Co., Ltd. 63 During External Calls This section describes some functions during external calls. Call Transfer This function is used for transferring a connected external call to another intercom user or internal call to external call. In case of ISDN, its available to transfer a connected external call to another external call. 1. Press the [R] button during an external call. 2. Press the destination station number. 3. Replace the handset when the handset answers the call. Replace the handset while the transfer tone is ringing to transfer the call unconditionally. Otherwise, wait until the destination user answers the call to transfer the call after consulting the user. Call Transfer On successful transfer, the color of the C.O. line lamp changes from green to red. 64 SAMSUNG Electronics Co., Ltd. Trunk Flash If OfficeServ is under other PBX system, this function allows you to be used features that the upper PBX system is serviced. 1. If an external call arrives while you are already answering another external call, press [Menu]. 2. Select [TRUNK FLASH] to answer the new call. The previous caller will remain on hold. 3. Select [TRUNK FLASH] again to return to the previous caller on hold. Trunk Flash The trunk flash function is a additional function of a trunk switch connected to the OfficeServ SOHO and will only be provided if the trunk switch supports the function. SAMSUNG Electronics Co., Ltd. 65 KEYPAD facility (ISDN Only) Keypad information is data in the form of characters of the telephone keypad (e.g. numbers, star key, hash key) which are converted into particular functions in an integrated services private branch exchange, a remote station or in the switching centre of your network operator. The keypad facility can be switched on or off via the menu.
( [Menu] [Phone Setup] [1. Feature On/Off] [1. Keypad facility On/Off], Set to ON.) 1. Press [KEYPAD] button during an external call to activate the KEYPAD facility. When KEYPAD facility is activated, the [KEYPAD] button will be changed to [DTMF] button. 2. Press [DTMF] button during an external call to deactivate the KEYPAD facility. Service charges You may have to apply for this service from your network operator and it might incur additional charges. Malicious call tracing
(malicious call identification, MCID)(ISDN Only) If you receive malicious phone calls and the caller's number is not shown on the display, you can still find out the number via the switching centre. This is achieved by means of an intercept function. 1. Press [Menu] Button during the external call. And select MCID. The switching centre will then trace back the call to its point of origin 66 SAMSUNG Electronics Co., Ltd. To Service
(contact with your network operator, firstly.) The callers network does not support CLIP (Calling Line Identification Presentation = identification of the oncoming call). In this case, the call cannot be traced. Parking a call (ISDN Only) You are holding a conversation and you would like to continue the call in another room. In this other room there is also an ISDN wall socket. However, you can also unpark the call with another telephone, e.g., a mobile handset. 1. Press [Intern] Key when you would like continue the call somewhere else. 2. Select the PARK. And enter the number to park. Call Waiting If the other call is incoming when you are holding a conversation, the incoming call number is displayed on LCD and indication tone is listened periodically. CAMP 2224444 Jone
- Press [Menu] [ANSWER] or [R], You can answer the other call.
- If you would like to refuse the other call, Press [Menu] [REFUSAL].
- If you would like the deflect the other call, press [Menu] [DEFLECT]. SAMSUNG Electronics Co., Ltd. 67 Conference during Intercom / External Calls This function is used for organizing a conference call between up to three parties(internal/external) during a call. 1. Press [Menu] during a call. 2. Enter the phone number of a third party to add to the conference. 3. When the third party answers the call, press
[Menu] and select [CONFERENCE]. 4. Conference member numbers appears. To remove a member from the conference, enter the phone number of the member while the Make Next Call message is displayed. 68 SAMSUNG Electronics Co., Ltd. CONVENIENT FEATURES Calling Line Identification Presentation (CLIP) This function displays the caller ID on the LCD of the phone. CLIP is a pay service provided by the telephone company. Such information may not be provided in the following cases:
- Caller requested the telephone company not to disclose his/her ID.
- Call was made from an area where the CLIP service is not provided(e.g., international calls).
- Call was made from a public phone.
- Caller information provided by the telephone company is damaged.
- The telephone company does not serve CLIP.
[PSTN]
Select [Menu] [Phone Setup] [5. Global Setup] [1. Feature On.Off] [3. CID Detection] to display Caller ID.
[ISDN]
It is not need the additional settings, CID is displayed if the network is serviced the CLIP SAMSUNG Electronics Co., Ltd. 69 Conference This section describes two functions of conference. Up to three members, including the caller, can participate in a conference call. Group Conference This function allows you to make a conference call with members registered to a group. Up to five groups can be assigned to a group conference. 1. Press the [Menu] button while the phone is in a standby mode. 2. Select [Services] [2. Conference]
[1. Group Conference] by using the direction button. 3. Move to the target group and press the [OK]
button. Then, the phone number list of the target group is displayed. If no group is registered, the screen for registering a group is displayed. Register the target group and select the group to make a conference call. Move the curser to the target group and press the
[Menu] button to edit or delete the group. 4. Press the [Send] button to make a call to the recipient. 70 SAMSUNG Electronics Co., Ltd. Each Conference This function allows you to call the recipient directly for a conference call, and to make a conversation. 1. Press the [Menu] button while the phone is in a standby mode. 2. Select [Services] [2. Conference]
[2. Each Conference] by using the direction button 3. Enter the target phone number and press the
[Send] button to connect the recipient. Press the [Menu] button and select the [Sending]
menu. Then, the call is connected to the recipient. 4. Once the recipient answers the phone, the conference call starts. SAMSUNG Electronics Co., Ltd. 71 Do Not Disturb (DND) This sections describes how to use DND function. Setting DND This function allows you to block calls to your phone even if the calls arrive. 1. Press the [SCREEN] button while the phone is in a standby mode. 2. Select [9. DND] from the [Station Status Display Screen]. 3. DND function is set and the DO NOT DISTURB message is displayed on the main screen. When DND function is set, the DND icon is displayed on the main screen, and the DND button of the [Station Status Display Screen] is expressed in black. 72 SAMSUNG Electronics Co., Ltd. Canceling DND This function allows you to cancel DND. 1. Press the [SCREEN] button while the phone is in a standby mode. 2. Select [9. DND] from the [Station Status Display Screen]. When DND function is set, the DND button is expressed in black.
<PSTN Type>
<ISDN Type>
3. DND is cancelled, and the DND is cancelled message is displayed on the main screen. When DND function is cancelled, the DND icon disappears from the main screen. SAMSUNG Electronics Co., Ltd. 73 Group Listening You can enable others to hear the conversation of a call through the speaker. The microphone is disabled. 1. Press the [Speaker] button during a call. 2. Other people can hear the conversation. 3. Press the [Speaker] button to turn off the speaker. 74 SAMSUNG Electronics Co., Ltd. MENU This section describes how to set various menus of OfficeServ SOHO. You can select a menu either by using the direction key to move to an item and pressing the [OK] button or by entering the item number. Main Menu Press the [Menu] button to display the following main menu on the LCD screen when the OfficeServ SOHO is in a standby mode. The Menu screen displays the SMS, PhoneBook, E-Diary, Sound, Services and Phone Setup as icons. Menu Item Description Inbox Outbox Templates Lists the received messages Send new messages and lists the messages sent Stores the most frequently used messages to use them as templates SMS Settings Configuration of the SMS service(Service Centre, notification, Display) Find Number Search an item in the Phonebook(per number, name, position, etc.) Outgoing calls Lists the outgoing calls and allows recalling the relevant numbers Incoming calls Lists the received calls and allows recalling the relevant numbers Missed calls Lists the calls with no answer and allows recalling the relevant numbers New Entry To add a name into the Phonebook SAMSUNG Electronics Co., Ltd. 75
1 | USERS MANUAL 2 OF 2 | Users Manual | 2.84 MiB | July 11 2005 / April 11 2005 |
Menu Item Description Edit Group Add/modify/delete a group Register Memory Button Allows associating the most frequently used numbers with the memory(M1- M4) buttons. Delete All Delete all items in the phonebook Wakeup Call Set up wake up call alarm service Alarm Configuration of the Alarm service Scheduler Simple Scheduler Memo Calculator World Time D-Day Unit Converter Memo for notes Calculator Display the time in the various parts of the world Allow storing anniversary dates Conversion between the various units of measurement(weight, length, etc) Ring Tone Key Tone Volume Missed calls Conference Services Set the tones of the various ring types Set the key tones Set the volume of the various ring tones Lists the calls that had no answer conference services Activate the services provided by Service Provider(info 412, Wake Up Service, Chiarotel, Urgent Calls) User can make his/her own service phone number list. For example, customer service center, technical support center. My Phone Customization of the settings of the Base Station Mobile Setup Customization of the Wireless Terminals settings a/b Port Setup Customization of the a/b port(SLT) settings Network Setup Configuration of the IP network system parameters(WAN, LAN and WLAN) Global Setup Configuration of the settings of the System EasyInstall Guided procedure for the configuration of the basic system settings Auto Attendant Configuration of the automatic answering service Least Cost Routing Configure Least Cost Routing setup Symbol Description Describe the meaning of the icons on the display of the Base Station. 76 SAMSUNG Electronics Co., Ltd. SMS Press [Menu] and select the Message icon(
Press [OK] button to display the Message menu screen below:
) by using the direction button. Message Message can be sent or received through a cellular phone or equipment that can exchange text messages. Message may not be exchanged or message may be sent at very low speed due to the service provider. Or, message service contents may be changed due to the service provider. SAMSUNG Electronics Co., Ltd. 77 Inbox This function allows you to check an incoming message or to set message reception status. Up to 60 incoming messages can be saved.
[Menu]
[1. Inbox]
When new messages arrive, the number of the messages is displayed on the LCD. Outbox This function allows you to send a text message by using the writing or outgoing message box function. Up to 30 outgoing messages can be saved.
[Menu]
[2. Outbox]
78 SAMSUNG Electronics Co., Ltd. Write This function allows you to write the new message. And Enter the destination Number to send the message
[Menu]
[2. Outbox] [1. Write]
[1. New Message] [OK]
Enter the Destination Number [OK]
(Press [Menu] button to find the deston) Sent This function shows you the list of message sent.
[Menu]
[2. Outbox] [2. Sent]
SAMSUNG Electronics Co., Ltd. 79 Templates This function allows you to write, edit, send, and delete a message saved in the message box, and to delete all messages saved in the message box.
[Menu]
[3. Templates]
New Template This function allows you to register a new message to the Template list.
[Menu]
[3.Templates]
[1. New Template] Write a message [OK]
Up to 10 messages can be saved in the message box. Search Templates This function allows you to check the template saved in the Templates. When a call is connected while writing a new template, the template is saved.
[Menu]
[3. Templates]
[2. Search Template] Select a Template [OK]
Press the [Menu] button to add, edit, send or delete a message, or to delete all messages. 80 SAMSUNG Electronics Co., Ltd. SMS Settings This function allows you to set a call back number or set the C.O. line to be used when a message is sent/received.
[Menu]
[4. SMS Settings]
SMS Server Number This function allows you to set the callback number when a message is sent.
[Menu]
[4. SMS Settings] [1. SMS Server Number] Select the Sever to save the Number Enter the SMS Number [OK] button SAMSUNG Electronics Co., Ltd. 81 Alert Time This function allows you to set alert time to notify a new message arrival.
[Menu]
[4. SMS Setting]
[2. Alert Time] Set alert time [OK]
Once: Alarm rings once when a message arrives. Every 2 Min: Alarm rings every two minutes until a new message is checked. No Tone: Alarm does not ring even if a new message arrives. Alert Type This function allows you to set alert type that notifies to the user when a message arrives.
[Menu]
[4. SMS Setting] [3. Alert Type]
Select alert type [OK]
Silent/Tone1/Tone2/Tone3/Tone4: The selected alarm rings at the setting alarm interval. Auto-Display This function allows you to set whether an incoming message is displayed on the LCD when the message arrives.
[Menu]
[4. SMS Setting]
[4. Auto-Display]
Set whether a message is displayed [OK]
On: Displays message content and the message notifying a new message. OFF: Displays only the message notifying a new message 82 SAMSUNG Electronics Co., Ltd. PhoneBook Press the [Menu] button and select the PhoneBook icon(
button. Press the [OK] button to display the PhoneBook screen.
) by using the direction Find Number This function allows you to search a registered phone number by name, phone number, speed dial number, group, or by time.
[Menu]
[1. Find Number]
SAMSUNG Electronics Co., Ltd. 83 By Name This function allows you to search a phone number from registered names.
[Menu] [1. Find Number] [1. By Name]
Enter a name [OK] Move the curser to the target name Select a number of home/mobile/work/other [Send]
By Number This function allows you to search a phone number from registered phone numbers.
[Menu] [1. Find Number]
[2. By Number] Enter a phone number
[OK] Move to the target phone number
[Send]
By Location This function allows you to search a phone number from registered speed dial numbers.
[Menu] [1. Find Number]
[3. By Location] Enter a speed dial number
[OK] Move to the target speed dial number
[Send]
84 SAMSUNG Electronics Co., Ltd. By Group This function allows you to search a phone number from registered groups.
[Menu]
[1. Find Number]
[4. By Group] Select a group
[OK] Move to the target name
Select a number of home/mobile/work/other
[Send]
By Time This function allows you to search a phone number from registered times.
[Menu]
[1. Find Number]
[5. By Time] Move to the target name
Select a number of home/mobile/work/other
[Send]
Searching Phone Number
- Press the [OK] button without entering a phone number or name in the input screen. Then, all phone numbers are displayed.
- Press the [Menu] button when the phone number to be edited or deleted is displayed. Then, a pop-up menu opens. Select a menu from the pop-up menu to edit/delete/register the phone number. SAMSUNG Electronics Co., Ltd. 85 Outgoing Call This function allows you to search recent outgoing calls or to make a call immediately. Up to 30 recent outgoing calls can be saved.
[Menu]
[2. Outgoing Call]
Move to the target phone number [Send]
If you press [OK] [Menu] on the list, you can save/edit/delete that list. Incoming Call This function allows you to search recent incoming calls or to make a call immediately. Up to 30 recent incoming calls can be saved.
[Menu]
[3. Incoming Call]
Move to the target phone number [Send]
If you press [OK] [Menu] on the list, you can save/edit/delete that list. 86 SAMSUNG Electronics Co., Ltd. Missed Call This function allows you to retrieve missed call numbers or make a call immediately. Up to 30 missed call numbers can be saved.
[Menu]
[4. Missed Call]
Move to the target phone number [Send]
Searching Outgoing/Incoming/Missed Call Press the [Menu] button when the phone number to be edited or deleted from the outgoing/incoming/missed call numbers is displayed, or when all phone numbers to be deleted are displayed. New Entry This function allows you to save phone numbers. Up to four numbers(home/mobile/
work/other) for each person can be saved. In addition, fax number, e-mail, group, and memo can be saved. Up to 250 persons and up to 1000 speed dial numbers(from 0 to 999) can be saved.
[Menu]
[5. Store Number]
Enter user data [OK]
To use the pause function for registering a phone number, enter a phone number, i.e. ARS, press the [Menu] button and enter the pause symbol, 'p', and enter the function number of the ARS. SAMSUNG Electronics Co., Ltd. 87 Edit Group This function allows you to add/delete a group or to modify a group name. Up to nine groups including undefined group can be saved.
[Menu]
[6. Edit Group]
Select the group whose name will be edited or deleted [Menu] Select [Add], [Edit], or [Delete]
Undefined name cannot be edited or deleted. Register Memory Button This function allows you to register a phone number frequently used to the M(memory) button.
[Menu]
[8. Register Memory Button]
Enter a phone number into the memory button to be registered [OK]
88 SAMSUNG Electronics Co., Ltd. Delete All This function allows you to delete all registered phone numbers.
[Menu]
[9. Delete All]
Enter password Select [Yes] [OK]
Deleting All Phone Numbers
- All registered phone numbers are deleted. However, recent outgoing call numbers, incoming call numbers and missed call numbers are not deleted.
- Default password is 0000. If you forget a password, contact the store where you bought OfficeServ SOHO or a service center. SAMSUNG Electronics Co., Ltd. 89 E-Diary Press the [Menu] button and select the E-Diary icon( ) by using the direction button. Press the [OK] button to display the E-Diary screen. Wakeup Call This function allows you to set alarm time and interval to ring the alarm. This function is conveniently used for wakeup call or conference time notification.
[Menu]
[1. Wakeup Call]
Set Time, Melody, and Interval
Select [On] by using the direction button [OK]
Select [Off] and press [OK] button to release a wakeup call. 90 SAMSUNG Electronics Co., Ltd. Alarm This function allows you to set two alarm clocks to ring the alarm.
[Menu]
[2. Alarm] Select [Alarm 1]
or [Alarm 2] Set Time, Melody, and Interval
Select [On] by using the direction button
[OK]
Select [Off] and press [OK] button to release a wakeup call. Scheduler This function allows you to register the date and hour of an important schedule to ring an alarm at the setting time for one minute. Up to 120 schedules can be registered. Up to 16 English characters can be registered for a schedule.
[Menu]
[3. Scheduler] Set Date
[OK] [Menu] [Add] Set schedule items
[OK]
Adding/Editing/Deleting a Schedule or Deleting All Schedules Set a date and press the [Menu] button to add/edit/delete a schedule or to delete all schedules. SAMSUNG Electronics Co., Ltd. 91 Memo This function allows you to save a simple memo in the phone. Up to five memos can be saved.
[Menu]
[4. Memo]
Enter memo contents [OK]
You can use the volume button to move to next line while writing a message.
Checking and Editing Memo Press the [OK] button in the memo list screen to display the screen displaying the memo. Then, press the [Menu] button to edit the memo. Adding/Deleting a Memo or Deleting all Memos Press the [Menu] button to add/delete a memo or to delete all memos from the Memo list screen. Calculator This function allows you to calculate four fundamental operations(addition, subtraction, multiplication, and division).
[Menu]
[5. Calculator]
Enter a number, an operator, and a number
[OK]
Operation by Calculator Enter the [#] button for a negative number, and enter the [*] button for a decimal point. 92 SAMSUNG Electronics Co., Ltd. World Time This function allows you to check the current time of cities around the world.
[Menu]
[6. World Time]
Select a city by using the direction button D-Day This function allows you to register an important schedule and to check the left time and past time. D-Day Add This function allows you to enter D-Day directly or to enter a reference date to calculate the left days/past days automatically.
[Menu]
[7. D-Day]
[1. D-Day Add] [1. D-Day Exact Date]
Enter an item [OK]
Select [2. D-Day Base/Off] from [7.D-Day] and select a date, days, and D-Day Before/After to calculate and enter the D-Day. SAMSUNG Electronics Co., Ltd. 93 D-Day List This function allows you to search the D-Day lists.
[Menu]
[7. D-Day]
[2. D-Day List] Set a D-Day
[OK]
Select the target D-Day and press the [Menu] button from the D-Day list screen. Then, a pop-up menu opens. Select a menu from the pop-up menu and edit/delete a D-Day or delete all D-Days. Unit Change This function allows you to convert a unit such as length, weight, area, volume and temperature to another unit.
[Menu]
[8. Unit Change]
Select an item by using the direction button
[OK] Enter a value [OK]
94 SAMSUNG Electronics Co., Ltd. Sound Press [Menu] and select the Message icon( ) by using the direction button. Press [OK] button to display the Message menu screen below:
Ring Tone This function allows you to set an External, Internal Door Ring Tone of OfficeServ SOHO.
[Menu]
[1. Ring Tone]
[1. External] or [2. Internal] or [3. Door] [1. Basic Bell] or [2. Melody] Select Basic Bell or Melody [OK]
Each number of Basic Bell/Melody types is seven. KeyTone This function allows you to set a KeyTone of OfficeServ SOHO
[Menu]
[2. KeyTone]
Select KeyTone Type [OK]
SAMSUNG Electronics Co., Ltd. 95 Volume This function allows you to set a Volume of OfficeServ SOHO
[Menu]
[3. Volume]
[1. Ring/Handset/Speaker]
Use the direction button or the [Vol] button to control each item volume [OK]
The volume of ring including mute has 9 levels. The volume of handset/speaker has 8 levels and mute function does not exist.
[Menu]
[3. Volume]
[2. Key Sound] Use the direction button or the [Vol] button to control key sound volume
[OK]
The volume of key sound including mute has 9 levels. 96 SAMSUNG Electronics Co., Ltd. Services Press the [Menu] button and select the Services icon( ) by using the direction button. Press the [OK] button to display the Services screen. Missed Calls This function shows you missed call list.
[Menu]
[1. Missed Calls]
Conference - Group Conference This function allows you to set the conference group.
[Menu]
[2. Conference] [1. Group Conference] Enter the group name and station number
[OK]
SAMSUNG Electronics Co., Ltd. 97 Conference - Each Conference This function allows you to set each conference.
[Menu]
[2. Conference] [2. Each Conference] Station number to Conference [OK]
Services - Call Up This function allows you to set the call up service.
[Menu]
[3.Services] Select the target service number [OK] [2. Edit] Enter the destination number to call up service [OK]
[Menu]
[3.Services] Select the target service number [OK] [1. Call Up], You can call the registered number. 98 SAMSUNG Electronics Co., Ltd. Phone Setup Press the [Menu] button and select the Phone Setup icon( ) by using the direction button. Press the [OK] button to display the Phone Setup screen. My Phone This function allows you to set a background of LCD screen, bell sound/volume, current time, password, and language of OfficeServ SOHO.
[Menu]
[1. My Phone]
SAMSUNG Electronics Co., Ltd. 99 Feature On/Off This function allows you to set a Feature of OfficeServ SOHO. 1. Phone Lock:
[Menu]
[1. My Phone]
[1. Phone Lock] Select LOCK or UNLOCK [OK]
If you select LOCK, you must enter the password before using the all functions. 2. Auto Answer:
[Menu] [1. My Phone]
[1. Auto Answer] Select On or Off [OK]
Call Forwarding This function allows you to set the call forwarding function.
[Menu]
[1. My Phone]
[2. Call Forwarding] Select a Forwarding Option
[OK] select the destination
[Menu]
[1. My Phone]
[3. Toll Level] Set the toll level of the Day and Night
[OK]
100 SAMSUNG Electronics Co., Ltd.
[Menu]
[1. My Phone]
[4. Select Background] Select background
[OK]
Current Time This function allows you to set current time and time zone.
[Menu]
[1. My Phone]
[5. Current Time]
Set Date and Time [OK]
Password This function allows you to change a 4-digit password to protect private life of the user or to set various phone functions. Default password is 0000.
[Menu]
[1. My Phone]
[6. Password] Enter the current password Enter a new password and the new password again [OK]
move the cursor with direction buttons. SAMSUNG Electronics Co., Ltd. 101 Language/Lingua This function allows you to set the language displayed on the LCD screen. If the language setting is changed to another, OfficeServ SOHO will be restarted automatically.
[Menu]
[1. My Phone]
[7. Language/Lingua] Select a language by using the direction button [OK]
Version Information This function allows you to check Version information of the OfficeServ SOHO.
[Menu]
[1. My Phone]
[8. Version Information] [OK]
Display Configuration This function allows you to check configuration status of the OfficeServ SOHO.
[Menu]
[1. My Phone]
[9. Display Configuration] [OK]
102 SAMSUNG Electronics Co., Ltd. Mobile Setup This function allows you to set system usage environment of OfficeServ SOHO.
[Menu]
[2. Mobile Setup] Select the station Number [OK]
Toll Level This function allows you to set the toll level of the mobile station.
[Menu]
[2. Mobile Setup] Select the station Number [1. Toll Level] Set the toll level of day and night [OK]
Display Configuration This function allows you to see the current configuration of selected station.
[Menu]
[2. Mobile Setup] Select the station Number [2. Display Configuration]
SAMSUNG Electronics Co., Ltd. 103 Mobile Deregistration This function allows you to deregistration of an OfficeServ SOHO WLAN phone.
[Menu]
[2. Mobile Setup] Select the station Number [3. Mobile Deregistration]
Select [No] to cancel the registration of a WLAN phone. a/b port Setup This function allows you to set a/b port of OfficeServ SOHO. Call Forwarding This function allows you to see the current configuration of a/b port.
[Menu]
[3. a/b port Setup] [1. Call Forwarding] Select the Call Forwarding type. 104 SAMSUNG Electronics Co., Ltd. Toll level This function allows you to set the day and night toll level of the a/b port.
[Menu]
[3. a/b port Setup] [2. Toll level] Set the toll level of day and night [OK]
Service Type This function allows you to set the service type. Select
[Menu]
[3. a/b port setup] [3. Service Type]
Select Service Type [OK]
If Station Number Setting is selected, set the target station number and press [OK] button. If Station Group Getting is selected, set the target station group and press [OK] button. Display Configuration This function shows you current a/b port configurations.
[Menu]
[3. a/b port setup] [3. Display Configuration]
SAMSUNG Electronics Co., Ltd. 105 Network Setup This function allows you to set network configurations. You can set WAN, LAN, Wireless LAN. WLAN - Connection Mode This function allows you to set the connection mode of the Officeserv SOHO. Select the mode according to the using network connection type.
[Menu]
[4. Network Setup] [1. WAN Setup]
[1. Connection Mode] Enter Password Select the Mode WAN - Security This function allows you to set the security level to be applied to the network.
[Menu]
[4. Network Setup] [1. WAN Setup]
[2. Security] Select the security level [OK]
WAN - Display Network Configuration This function shows you current WAN configurations. 106
[Menu]
[4. Network Setup] [1. WAN Setup]
[3. Display Network Configuration]
SAMSUNG Electronics Co., Ltd. LAN - LAN IP This function allows you to set LAN IP address.
[Menu]
[4. Network Setup]
[2. LAN Setup] [1. LAN IP] Set the IP address [OK]
Wireless LAN - SSID This function allows you to set SSID. SSID is used network ID for wireless LAN.
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [1. SSID] Set SSID. Wireless LAN - Securty This function allows you to set WLAN Security mode. There are three types of security mode, None/ WEB/WPA. None is not need additional settings.
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [2. Security]
SAMSUNG Electronics Co., Ltd. 107 If you select WEP, Set Key type and enter the Web key. The character type is different according to the selected Key Type. If you select WPA, Set WPA Mode and enter the PassPhrase with HEX. Wireless LAN - Mobile User ID/Password This function allows you to set Mobile User ID/Password to register mobile phones to OfficeServ SOHO.
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [3. Mobile user ID/Password]
Enter the User ID/ Password [OK]
108 SAMSUNG Electronics Co., Ltd. Wireless LAN - Wireless LAN Channel This function allows you to set the Wireless LAN Channel that an AP and WLAN NIC use.
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [4. Wireless LAN Channel] Select the Select channel type [OK]
If you select the Direct Input, enter the direct channel number. Wireless LAN - Repeater This function allows you to set Repeater configurations when the OfficeServ SOHO is used as Repeater mode.
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [5. Repeater] [1. Repeater On/Off] Select On/Off [OK]
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [5. Repeater] [2. Repeater List] Select the Repeater to edit [OK]
Enter the Description of Repeater and MAC address. To delete Repeater, select the repeater on Repeater List menu and Press [menu]. Select [1. Delete]. SAMSUNG Electronics Co., Ltd. 109 Wireless LAN - WMM (WiFi MultiMedia) This function allows you to set the feature On/Off of WMM(WiFI Multimedia).
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [ 6. WMM] Set to On/Off
[OK]
Wireless LAN - Neighbor AP Channel This function allows you to set the Neighbor AP Channel.
[Menu]
[4. Network Setup]
[3. Wireless LAN Setup] [7. Neighbor AP Channel] Set the AP channel [OK]
Global Setup This function allows you to set Global configurations to use general and special features of OfficeServ SOHO.
[Menu]
[5. Global Setup]
110 SAMSUNG Electronics Co., Ltd. Feature On/Off - Music On Hold This function allows to set the Hold Music when the call is holding.
[Menu]
[5. Global Setup]
[1. Feature On/Off] [1. Music On Hold] Select the Music On Hold Type [OK]
Music On Hold types are Music/ Tone/ Silence. Feature On/Off - Courtesy Answering This function allows to set the Courtesy Answering.
[Menu]
[5. Global Setup]
[1. Feature On/Off] [ 2. Courtesy Answering] Select On/Off [OK]
Feature On/Off - CID Detection This function allows to set CID Detection of external Line.
[Menu]
[5. Global Setup]
[1. Feature On/Off] [ 3. CID Detection] Select On/Off of Line 1/2 [OK]
SAMSUNG Electronics Co., Ltd. 111 Feature On/Off - Trunk Flash This function allows to set Trunk Flash of External Line.
[Menu]
[5. Global Setup]
[1. Feature On/Off] [ 4. Trunk Flash] Select On/Off of Line 1/2 [OK]
Feature On/Off - LCR On/Off This function allows you to set LCR.
[Menu]
[5. Global Setup]
[1. Feature On/Off] [ 5. LCR On/Off] Select On/Off
[OK]
Station Group Registration This function allows you to organize the station group.
[Menu]
[5. Global Setup]
[2. Station Group] Select the station group to edit Press * to select the station number to make a group
[OK]
112 SAMSUNG Electronics Co., Ltd. Trunk - Ring Destination This function allows you to set Ring Destination.
[Menu]
[5. Global Setup]
[3. Trunk] [1. Ring Destination] Select the station number to Ring [OK]
Trunk - PRS Type This function allows to set PRS Type of external Lines.
[Menu]
[5. Global Setup]
[4. Trunk] [2. PRS Type] Set the PRS type of Line1/2
[OK]
Trunk - Dial Type This function allows you to set Dial Type of external Lines.
[Menu]
[5. Global Setup]
[5. Trunk] [3. Dial Type] Select dial type of Line1/2
[OK]
SAMSUNG Electronics Co., Ltd. 113 Prefix This function allows you to set the number to prefix the destination call number.
[Menu]
[5. Global Setup]
[6. Prefix] Enter the number [OK]
Internal Numbers This function allows you to set internal numbers of Base station, mobile stations, a/b port. Station group.
[Menu]
[5. Global Setup]
[7. Internal Numbers] Select the station to set number
enter the number [OK]
Call Filter list This function allows you to set the call filter list you would like to filter. Black List
[Menu] [5. Global Setup]
[8. Call Filter list] [1. Black List] Select the number to edit or Not Registered to register the black list Enter the number and set the filter level using * [OK]
114 SAMSUNG Electronics Co., Ltd. White List Caller Filter List CID Destination List
[Menu] [5. Global Setup]
[8. Call Filter list] [2. White List] Select the number to edit or Not Registered to register the white list Enter the number and set the filter level using * [OK]
[Menu] [5. Global Setup]
[8. Call Filter list] [3. Caller Filter List] Enter the number [OK]
[Menu] [5. Global Setup]
[8. Call Filter list] [4. CID Destination List] Select the number to edit or Not Registered to register Enter the Incomming number and set the station to apply [OK]
SAMSUNG Electronics Co., Ltd. 115 Mobile Deregistration This function allows you to deregister all mobile phones.
[Menu]
[5. Global Setup]
[7. Mobile Deregistration] Select Yes/No [OK]
Time Variant mode This function allows you to set time variant Mode.
[Menu]
[5. Global Setup]
[8. Time Variant] [1. Time Variant Mode] Select the mode Auto/ Permanent/Temporary [OK]
If you select Permanent of Temporary, set the day or night apply to. Time Variant - Time Zone This function allows you to set time zone.
[Menu]
[5. Global Setup]
[8. Time Variant] [2. Time Zone] Select the Day to edit the time zone set the Time zone [OK]
116 SAMSUNG Electronics Co., Ltd. Time Variant - Holidays This function allows you to set holidays.
[Menu]
[5. Global Setup]
[8. Time Variant] [3. holidays] Enter the date [OK]
After entering the date and press [ok], you can see the holiday list like left LCD display. If you press [Menu], you can add, modify, delete the holiday schedule. Emergency Number This function allows you to set emergency number. MENU]
[5. Global Setup]
[9. Emergency Number] Select the number to edit or Not Registered to add the emergency number [OK] Enter or modify emergency number [OK]
Reset This function allows you how to reset the OfficeServ SOHO. MENU]
[5. Global Setup]
[0. Reset] Enter Password Select Reset Option, Reset Function/Reset All [OK]
SAMSUNG Electronics Co., Ltd. 117 Easy Install Reference the Easy Install Section in this guide. [Menu] [6. Easy Install]
Auto Attendant This function allows you to set AA(Auto Attendant). Record This function allows you to record an auto attendant message if Auto Attendant is selected.
[Menu]
[7. Auto Attendant] [1. Record]
Select Message1 or Message2 [OK] Record the Message To finish recording, Press [End] [OK]
An auto attendant message can be recorded for up to one minute. Example of Auto Attendant Message If Auto Attendant is selected for an incoming call destination, an auto attendant message can introduce a company or station numbers. For example, trade company. Press the target dept number. Press 1 for Sales dept, press 2 for General Managing dept, and press 0 for introduction. Station numbers can be set in Auto Attendant Ring Assign of Ring Destination. 118 SAMSUNG Electronics Co., Ltd. Play This function allows you to play an auto attendant message to check the message.
[Menu] [7. Auto Attendant] [1. Record] Select Message1 or Message2 [OK] Play an auto attendant message Select message This function allows you to select the message to use AA message.
[Menu] [7. Auto Attendant] [3. Select Message] Set the Message1 or Message2 [OK]
Ring Destination This function allows you to set destination stations for each button when using the Auto Attendant function for a call incoming through a C.O. line.
[Menu] [7. Auto Attendant] [4. Ring Destination] select Day or Night Select the target number [OK] Set Auto Attendant Ring Assign
[OK]
SAMSUNG Electronics Co., Ltd. 119 No Action Destination This function allows you to set destination when no station answer the call.
[Menu] [7. Auto Attendant] [5. No Action Destination] Set the target station. VoIP Setup This function allows you to set VoIP configurations. Before setting, contact the ISP for VoIP service. Feature On/Off - Conversion Code This function allows you to set the Conversion Code On/Off. If its set to On, change the call mode with pressing #.
[Menu] [8. VoIP Setup] [1. Feature On/Off]
[1. Conversion Code] Select On/Off [OK]
120 SAMSUNG Electronics Co., Ltd. Feature On/Off - Rerouting This function allows you to set rerouting or not, when VoIP or C.O line has some problem.
[Menu] [8. VoIP Setup] [1. Feature On/Off]
[2. Rerouting] Select On/Off [OK]
Feature On/Off - VoIP mode This function allows you to set the default calling mode to VoIP mode or not.
[Menu] [8. VoIP Setup] [1. Feature On/Off]
[2. VoIP Mode] Select On/Off [OK]
Account registration This function allows you to register the account for VoIP service.
[Menu] [8. VoIP Setup] [2. Account Registration Select the VoIP number to register or to edit Enter the Phone number, user ID and Password
[OK]
SAMSUNG Electronics Co., Ltd. 121 Destination Table This function allows you to set Destination table using incoming digit.
[Menu] [8. VoIP Setup] [3. Destination table]
Select the target number Set the destination station
[OK]
CLIP This function allows you to set the CLIP.
[Menu] [8. VoIP Setup] [4. CLIP] Select the target station Set the CLIP [OK]
VoIP Call List This function allows you to set the call number list that should be called through VoIP Line.
[Menu] [8. VoIP Setup] [5. VoIP Call List] Select the target number or Not Registered to edd Enter the number [OK]
122 SAMSUNG Electronics Co., Ltd. Proxy Server This function allows you to set Proxy server URL for VoIP service.
[Menu] [8. VoIP Setup] [6. Proxy Server]
Enter the URL to use proxy Server [OK]
Uplink Speed This function allows you to set the uplink speed to VoIP call. According to uplink speed, the maximum VoIP call number is changed.
[Menu] [8. VoIP Setup] [7. Uplink Speed]
Select the speed [OK]
Display Configuration This function shows you the current VoIP configurations.
[Menu] [8. VoIP Setup] [8. Display Configuration] [OK]
SAMSUNG Electronics Co., Ltd. 123 Least Cost Routing This function allows you to set LCR(Least Cost Routing). LCR Rules This function allows you to set LCR rules.
[Menu] [9. Least Cost Routing] [1. LCR Rules] Enter the digit [OK]
Delete Dgt. cnt: Digit count to delete. Inser Dgt: Number to Inser.to dial number. Append Dgt: Nember to Append to dial number. LCR Routing Table This function allows you to set LCR Routing table.
[Menu] [9. Least Cost Routing] [2. LCR Routing Tables] Select the target table number [OK]
Enter the digit [OK]
Digit: Digit to Apply the LCR Rules. No of Digit: the number of digit to compare with dialing number. Route Rule: Select the Rule number Symbol Description This function shows you the symbol and the description.
[Menu] [0. Symbol Description]
SAMSUNG Electronics Co., Ltd. 124 TROUBLESHOOTING This section describes the problems that may occur while OfficeServ SOHO is used and the troubleshooting of the problems. Check the following cases before contacting a service center. Nothing is displayed on the LCD screen. Check if the connection between the power cable of OfficeServ SOHO and the phone line is established properly.(Refer to Installation of this guide.) A bell is not ringing or the bell sound is low. Press the [Vol] button to turn the bell volume up. Making a call by lifting a handset during power failure is disabled. Making a conversation by lifting a handset during power failure is available when a C.O. line is connected to PSTN 1. Check if the C.O. line is connected to PSTN 1. A wakeup call/alarm is not ringing at the setting time.
- Check if the current time is properly set in OfficeServ SOHO.
- Check if an alarm is set. Caller ID is not displayed on the LCD screen.
- Check if the CLIP service requested to the telephone company.
- Caller requested the telephone company not to disclose his/her ID.
- Call was made from an area where the CLIP service is not provided
(e.g., international calls).
- Call was made from a public phone.
- Information provided by the telephone company is damaged.
- The telephone company does not serve CLIP. SAMSUNG Electronics Co., Ltd. 125 The registration status of a WLAN phone is not properly displayed. If OfficeServ SOHO restarts due to a power failure, software upgrade or change in settings, the status of the WLAN phone will be displayed as normal in approximately three minutes. If the registration status is not displayed properly after three minutes, turn off and turn on the WLAN phone again. Network environment is not set properly.
- Check the connection method to external network and network information
(IP address, gateway, and subnet mask).
- Check PC operating system, and check if LAN card is mounted on the PC.
- Check the Internet service system first.
- Turn off the external modem. Wait for approximately five minutes and turn on the external modem and OfficeServ SOHO in sequence.
- Check if an ADSL connection program is installed in the PC. Remove the connection program using [Add/Remove Programs] of [Control Panel] and set the Internet service again. WLAN phone cannot be registered.
- Check if the SSID is correct.
- Check if an encryption key(WEP key) is set. If so, refer to the manual registration procedure and register the WLAN phone.
- You can verify the SSID and encryption key at [Menu]
Enter password(default: 0000) [4. WLAN Information] of OfficeServ SOHO.
[2. WLAN Setup]
126 SAMSUNG Electronics Co., Ltd. WEB MANAGEMENT What is Web Management System?
Web Management System allows you to access the OfficeServ SOHO server through a PC and to set or retrieve network environment, security status, and system management of the OfficeServ SOHO. Internet Intranet PSTN FAX Web Management IEEE802.11 b External Modem
(xDSL/Cable)/LAN PC WIP-5000M WLAN phone IEEE802.11 b/g OfficeServ SOHO Laptop Computer PDA Web Management Main Functions
- Default setting: Sets IP address, Internet line, and system date/hour.
- Advanced setting: Sets detailed information such as internal network management.
- Security setting: Sets OfficeServ SOHO NAT, and filtering.
- System setting: Sets OfficeServ SOHO database, upgrades OfficeServ SOHO, and changes its password.
- Status retrieval: Retrieves the current values set in OfficeServ SOHO. SAMSUNG Electronics Co., Ltd. 127 Login Follow the steps below to access the Web Management system:
1. Connect the OfficeServ SOHO to the PC. Connect one end of the supplied LAN cable to the LAN OUT port on the back of OfficeServ SOHO. Connect the other end of the LAN cable to the LAN port of the PC. In a PC where a wireless LAN card is used, check the SSID setting of OfficeServ SOHO, and then establish a wireless connection in accordance with the manual provided by the LAN card manufacturer. SSID
- The default SSID of OfficeServ SOHO is 111111(Default SSID is set differently for each device) Check the default SSID from [Menu] [Phone Setup] [6. WLAN Setup] [2. SSID] in the OfficeServ SOHO.
- Separate software does not need to be installed because the software package of the Web Management system is included in the OfficeServ SOHO. 2. Set a connection in the local area of PC. Select one of the automatic allocation method(DHCP) and direct setting method(Static IP). To establish a connection in the direct setting method, set IP addresses as follows in the Internet protocol(TCP/IP) properties window of [Local properties] in PC:
- IP Address: An address of 192.168.111.2 to 192.168.111.239
- Subnet Mask: 255.255.255.0
- Default Gateway: 192.168.111.1 To establish a connection in the automatic allocation method, select [obtain an IP address automatically] from the Internet protocol(TCP/IP) properties window in [Local properties] of the PC. Then, an IP address is set automatically. 128 SAMSUNG Electronics Co., Ltd. 3. Once settings are completed, enter the LAN IP address(192.168.111.1), which is the default setting of OfficeServ SOHO delivery, in the URL address bar after running a web browser(Internet Explorer 5.0 or higher) in the PC to access the system. To access OfficeServ SOHO from the PC connected to Internet, enter the IP address when the WAN setting is set to Static IP in OfficeServ SOHO. A connection might be closed depending on settings(e.g., filtering) when accessing OfficeServ SOHO from Internet. Connect to Hhttp://192.168.111.1H in the local network. 4. Once the login window appears, enter the initial administrator ID and password, and click [OK]. The initial ID and password are root and 0000. Password The password can be changed in [System] [Password], however the administrator ID cannot be changed. SAMSUNG Electronics Co., Ltd. 129 Data This section allows you to set the Data menu. Network This menu allows you to set network configurations of OfficeServ SOHO. WAN First, select the Connection Mode and set WAN information according to the mode. LAN This menu allows the user to configure LAN by using OfficeServ SOHO. Retrieve the gateway IP and netmask of LAN. 130 SAMSUNG Electronics Co., Ltd. Routing Table This menu allows you to set the Routing Table. Select the type and enter the destination IP address, Netmask and Interface IP address. And press [Add] button. DHCP Server - Configuration This menu allows you to set details such as general settings, static address allocation, and scope address allocation of the DHCP server, which allocates an IP to the PC connected to OfficeServ SOHO and to operate or stop the DHCP server. SAMSUNG Electronics Co., Ltd. 131
- Lease Time: This is an IP lease time, that is, a time to maintain the IP allocated by the DHCP server.
- The Assignment of Pool Address: Enter the IP address to set scope address allocation. Press [Add] Button to set static address allocation. DHCP of WAN DHCP of WAN is a client that leases an IP from an external DHCP server. DHCP refers to a server that allocates an IP to the LAN PC connected to OfficeServ SOHO. DHCP Server - Management This menu allows you to operate the DHCP server. Click [Stop] to stop the operation of the DHCP server. Once the DHCP server stops, the [Stop] button is changed to the
[Run] button. Click [Run] to operate the DHCP server. 132 SAMSUNG Electronics Co., Ltd. DDNS - Configuration This menu allows you to set the dynamic DNS service. Also, DDNS allows the user to access OfficeServ SOHO in the same domain name regardless of dynamically allocated IPs. DDNS updates dynamically variable IP addresses to the DDNS server periodically unlike regular DNS server. To use this function, sign up www.dyndns.org DDNS - Management This menu allows you to provide the DDNS service. Click [Stop] to stop the operation of the DHCP server. Once the DHCP server stops, the [Stop] button is changed to the
[Run] button. SAMSUNG Electronics Co., Ltd. 133 WLAN This menu allows you to set WLAN configurations of OfficeServ SOHO. Configurations This menu allows the user to set details of wireless LAN.
- SSID: Enter Service Set Identifier(SSID) with numbers of six characters or less. The SSID is an identifier of Access Point(AP). That is, each AP is searched separately by using SSID in a PC where a wireless LAN card is installed. Select an SSID of OfficeServ SOHO from the searched SSIDs to make communications with each other. Set a different SSID from the one of the neighboring AP.
- SSID Visible: Set the SSID visible or not at other AP.
- Channel: Set the radio channel to one of Auto and 1~13. If wireless APs are adjacent, set different AP channels to avoid interference. It is recommended that the radio channel should be set with 3 to 4 spacing.
[Auto] allows the user to set a channel automatically by checking the available channel at the time when the setting is applied. The channel determined when setting to [Auto] can be checked from [Status] [Wireless].
- BSSID: The MAC address of the network interface connected to the wireless LAN device is displayed.
- Wireless Security: Select the security mode to apply to the WLAN. 134 SAMSUNG Electronics Co., Ltd. MAC Access Control This menu allows you to set MAC access control. To apply the OfficeServ SOHO, Select On. Repeater This menu allows you to allow the repeater, and add the MAC address to Repeater list. Enter the MAC address of Repeater to be allowed, press [OK] button. SAMSUNG Electronics Co., Ltd. 135 AP Channel This menu allows you to set Neighbor AP channel. Security This menu allows you to set security configurations of OfficeServ SOHO. NAT - NAT Forwarding This menu allows you to set port forwarding. 136 SAMSUNG Electronics Co., Ltd.
- Protocol: Select a transmission layer protocol(e.g., TCP and UDP) to access.
- Ext Port: Enter the port that will be used to connect to WAN. Select [Predefined] to select one of FTP, Telnet, SMTP, HTTP, and POP3. Select [Manual] to enter the port number manually.
- Int IP: Enter the IP address of the internal host that provides services. Select [PC Name] to set a host PC. Select [Manual] to enter the IP address of the host PC. In such a case, enter the ending address.
- Int Port: Enter the number of the port that provides services in the internal host. Select [Predefined] to select one of FTP, Telnet, SMTP, HTTP, and POP3. Select
[Manual] to enter the port number manually. NAT - DMZ Setting This menu allows you to set DMZ setting.
- Int IP: Enter the IP address of the internal host to be set as a DMZ server. Select
[PC Name] to set a host PC. Select [Manual] to enter the IP address manually. In such a case, enter only the ending IP address. SAMSUNG Electronics Co., Ltd. 137 Filtering - Configuration This menu allows the user to set a security level when connecting to internal or external Internet in OfficeServ SOHO.
- Low: This is the default value. External and internal traffic is allowed.
- High: The external traffic that attempts access to OfficeServ SOHO is blocked while the traffic from the internal network to WAN is allowed. Either port forwarding or DMZ settings are maintained. 138 SAMSUNG Electronics Co., Ltd. Filtering - Remote Access This menu allows you to allow or block access by setting an IP address when external access to OfficeServ SOHO is attempted
- Default Policy: Displays the security level set in [Security] [Filtering]
[Configuration]. That is, this option displays whether the HTTP session through which external access to OfficeServ SOHO is performed is allowed or blocked.
- Ext IP: Enter the external IP address of the external access session to OfficeServ SOHO.
- Time Setting: Enter the time period allow to access.
- Target: Set whether to allow or block access to the access session set in Ext IP. SAMSUNG Electronics Co., Ltd. 139 Filtering - LAN WAN This menu allows the internal user to allow or block access to WAN by setting an IP address or service.
- Default Policy: Displays whether internal access session to outside, which is set in
[Security] [Filtering] [Configuration], is allowed or blocked. The default policy of internal access session to outside is Allow.
- Protocol: Set a protocol(e.g., TCP, ICMP, and UDP) of internal access session to WAN.
- Internal: Enter the IP or MAC address of the internal host in internal access session to WAN. Select [PC Name] to set a host PC. Select [Manual] to enter the IP/MAC address manually. In such a case, enter only the ending address.
- Port Type: Enter the port number of the internal host in internal access session to WAN. Select [Predefined] to set the port from FTP, Telnet, SMTP, HTTP, and POP3. Select [Manual] to enter the port number manually.
- TCP Flag: Select the TCP Flag type.
- Time Setting: Enter the time period to apply.
- Target: Sets whether access to the access session is allowed or blocked. If Drop is selected, internal access to outside will be blocked regardless of the settings in
[Security] [Filtering] [Configuration]. 140 SAMSUNG Electronics Co., Ltd. Filtering - URL Filtering This menu allows the user to prevent LAN users from accessing a specific web site(e.g., site on obscenity, gambling, and stock, which have nothing to do with work). The function is enabled only when the system is connected to Internet. Enter the URL of the target web site. Filtering - URL Filtering This menu allows you to apply the Hacking Protection mode to OfficeServ SOHO. SAMSUNG Electronics Co., Ltd. 141 Filtering - Security Log This menu shows you the Log files. Select the time period that you would like to search. Telephone & Phonebook This menu allows you to set telephony features of OfficeServ SOHO and edit(of add) the Phonebook. It services the same menu as manual setting of OfficeServ SOHO. Reference to the Menu section in this guide. 142 SAMSUNG Electronics Co., Ltd. Eaasy Install This menu allows you to set the OfficeServ SOHO Easy Installation. DB Config This function allows the user to import the DB file saved in PC to OfficeServ SOHO. DB import enables the current settings to be changed to the imported DB. In such a case, all settings are changed; thus, check if DB is valid before DB import. Also, OfficeServ SOHO restarts automatically to apply the changed settings Press [Browser] Button to find the saved DB in PC. SAMSUNG Electronics Co., Ltd. 143 Upgrade This menu allows you to upgrade a software package. Password This menu allows you to change the system password. 144 SAMSUNG Electronics Co., Ltd. Status The menu allows you to retrieve system settings of OfficeServ SOHO. SAMSUNG Electronics Co., Ltd. 145 ANNEX What is OfficeServ SOHO CRM?
OfficeServ Small Office Home Office(SOHO) Customer Relationship Management(CRM) is a program running on PC connected to OfficeServ SOHO. Users of OfficeServ SOHO can perform customer data management and call control through the OfficeServ SOHO CRM program. OfficeServ SOHO CRM provides the following functions:
CID Based Customer Data Management
- Customer data management based on Caller Identification(CID).
- Customer DB configuration using template. Customer Address Book Management
- Synchronization with OfficeServ SOHO address book/phonebook.
- Provides detailed customer data. Call Control
- Various call control functions can be performed from a PC through CTI(Only available for OfficeServ SOHO). External Data Interwork
- Data interwork with Microsoft Outlook/Excel.
- Convenient customer data entry through inter-working with OfficeServ SOHO address book. 146 SAMSUNG Electronics Co., Ltd. Specification The specification of OfficeServ SOHO is described as follows:
Item Model Name Temperature(C) Humidity(%) Conversation through Speakerphone Internet Service WLAN Service RF Protocol LCD Number of Registered WLAN phones Number of Registered wireless devices RF Specification is described as follow:
Description SIT200EM Temperature for operation: 0~45C Temperature for storage: -25~70C 0~90%
2.4 G ~ 2.483 GHz IEEE 802.11 b/g LCD graphic: 320 240 pixel Screen size: 89.9 61.7 mm 8 6 Detailed Item Description Interface Form Factor International Standard Operating voltage Output Power(11g) Output Power(11b) Current Consumption(11g) Current Consumption(11b) Maximum Input Lever(11g) Maximum Input Lever(11b) Current Consumption(11g) Current Consumption(11b) MiniPCI Type IIIB MiniPCI Type IIIB IEEE802.11b/g 3.3V +/- 5%
Under 19dBm Under 19dBm Under 550mA Under 550mA Min 82dBm Min 87dBm Ave 450mA Ave 450mA Item General specification Transmit specification Receiver specification SAMSUNG Electronics Co., Ltd. 147 Regulatory Information
- FCC Information This equipment has been tested and found to comply with limits for a class B digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable Protection against harmful interference in a residential installation. This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful nterference to radio communications. However, there is no guarantee that nterference will not occur in a particular installation. If this equipment does cause unacceptable interference to radio and television eception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for help. Caution Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna used for this transmitter must be installed to provide a separation 148 SAMSUNG Electronics Co., Ltd. distance of at least 20cm from all persons and must not be co-located or operation in conjunction With any other antenna or transmitter. SAMSUNG Electronics Co., Ltd. 149
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-11-04 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-11-04
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
SIT200EMRB
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C******
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | OFFICESERV SOHO | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Nemko Korea Co., Ltd
|
||||
1 | Name |
H******** K******
|
||||
1 | Telephone Number |
82-33********
|
||||
1 | Fax Number |
82-33********
|
||||
1 |
y******@nemkokorea.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 68 | 2412.00000000 | 2462.00000000 | 0.0430000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC