|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2019-04-25
|
|
various
|
2019-04-05
|
|
various
|
Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
|
various
|
FCC Registration Number (FRN) |
0005810205
|
|
various
|
Physical Address |
19 Chapin Rd., Building D
|
|
various
|
Pine Brook, New Jersey 07058
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
t******@pctest.com
|
|
various
|
TCB Scope |
B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
|
|
various
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
various
|
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
various
|
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
A3L
|
|
various
|
Equipment Product Code |
SMG977U
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
J**** C********
|
|
various
|
Title |
General Manager
|
|
various
|
Telephone Number |
973-8********
|
|
various
|
Fax Number |
973-8********
|
|
various
|
E-mail |
j******@samsung.com
|
|
|
app
s
|
Technical Contact
|
|
various
|
Firm Name |
PCTEST Engineering Laboratory, Inc.
|
|
various
|
Name |
R**** O****
|
|
various
|
Physical Address |
6660-B Dobbin Road
|
|
various
|
Columbia, Maryland 21045
|
|
various
|
Columbia, 21045
|
|
various
|
United States
|
|
various
|
Telephone Number |
410-2********
|
|
various
|
Fax Number |
410-2********
|
|
various
|
E-mail |
t******@pctest.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/22/2019 |
| various | 09/27/2019 |
| various | 09/23/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | Yes |
| various | No |
| various | Equipment Class | 5GM - Part 30 Mobile Transmitter |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | JBP - Part 15 Class B Computing Device Peripheral |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | DXX - Part 15 Low Power Communication Device Transmitter |
| various | PCE - PCS Licensed Transmitter held to ear |
| various | CBE - Citizens Band End User Devices |
| various | DTS - Digital Transmission System |
| various | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
| various | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Handset |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| various | Modular Equipment Type | Does not apply |
| various | Purpose / Application is for | Class III permissive change to software defined radio |
| various | Original Equipment |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Class III Permissive Change.
Output power listed is EIRP. This device supports bandwidths of 50 and 100 MHz for NR band n261 and n260.
SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
Software Defined Radio. |
| various | Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. Software Defined Radio.
Device is a 2 x 2 MIMO configuration, enabled for 5 GHz operations as described in this filing.
This device supports 20, 40, and 80 MHz BW modes.
The highest SAR reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) use conditions is 0.32 W/kg, 0.31 W/kg, 0.37 W/kg, 1.59 W/kg, and 3.98 W/kg, respectively.
HAC Rating: M4 T3 - 2011 |
| various | Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. Software Defined Radio.
The highest SAR reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.25 W/kg, < 0.10 W/kg, 0.11 W/kg, and 1.59 W/kg, respectively. |
| various | Output power listed is EIRP. This device supports bandwidths of 50 and 100 MHz for NR band n261.
SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.
Software Defined Radio. |
| various | Output power listed is ERP for Part 22, 27, 22H/90S, and 90R for frequencies below 1 GHz, and EIRP for Part 24 and 27 for frequencies above 1 GHz, and conducted for Part 90S. The maximum Part 90.635(b) conducted power for LTE B26 operations at 15 MHz Bandwidth is 0.298 W. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. Software Defined Radio.
This device supports bandwidths of 1.4/3/5/10 MHz for LTE Bands 5/12, bandwidths of 5/10 MHz for LTE Bands 13/14/30, bandwidths of 1.4/3/5/10/15 MHz for LTE Band 26, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 4/66/2, and bandwidths of 5/10/15/20 MHz for LTE Bands 7/38/41.
The highest SAR reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) use conditions is 0.30 W/kg, 1.11 W/kg, 1.39 W/kg, 1.59 W/kg, and 3.98 W/kg, respectively.
HAC Rating: M4 T3 - 2011
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| various | Output power listed is EIRP. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. Software Defined Radio.
This device supports bandwidths of 5/10/15/20 MHz for LTE Band 48.
The highest SAR reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission, and product specific (phablet) use conditions is < 0.10 W/kg, 0.18 W/kg, 0.42 W/kg, 1.59 W/kg, and 3.98 W/kg, respectively.
HAC Rating: M4 T3 - 2011 |
| various | Output power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure. Software Defined Radio.
Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing.
The highest SAR reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.46 W/kg, 0.18 W/kg, 0.38 W/kg, and 1.59 W/kg, respectively.
HAC Rating: M4 T3 - 2011 |
| various | For satisfying FCC RF exposure compliance requirements, the wireless charging transmitter operation must be used with a separation distance of at least 20 cm from all persons. Users must be provided with instructions for satisfying RF exposure compliance. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
PCTEST Engineering Laboratory, Inc.
|
|
various
|
Samsung Electronics Quality Assurance Lab
|
|
various
|
Name |
R******** O******
|
|
various
|
L****** C******
|
|
various
|
Telephone Number |
410-2********
|
|
various
|
82-10********
|
|
various
|
Fax Number |
410 2********
|
|
various
|
82-30********
|
|
various
|
E-mail |
r******@pctestlab.com
|
|
various
|
a******@samsung.com
|
|