all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.11 MiB | ||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 1.11 MiB |
* Some of the contents in this manual may differ from your phone depending on the software of the phone or your service provider. PORTABLE CELLULAR TELEPHONE SCH-A301 Users Manual ELECTRONICS
( 2 0 0 1 . 5 . 7 ) v e r s i o n D r a f t World Wide Web http://www.samsungmobile.com Printed in Korea Code No. : GH68-XXXXXA HonKong China. 2001/04. Rev.1.0 CC RF EXPOSURE INFORMATION SAR Information & FCC ID Labeling In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-
326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations using the optional belt-clip/holster placed 1.5cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5cm must be maintained between the users body and the phone, including the antenna, whether extended or retracted. The use of third-
party belt-clips/ holsters with no metallic components that provide the minimum separation distance of 1.5cm can be used to satisfy FCC RF exposure requirements. The use of non-tested accessories or other body-worn operations may not comply with FCC RF exposure requirements and should be avoided. Contact your local dealer for optional accessory items. Vehicle Mounted External Antenna (optional, if available.) A minimum separation distance of 7.9 inches (20cm) must be maintained Between a person and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC website at www.fcc.gov i THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement know as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is XXXXX and when worn on the body, as described in this user guide, is XXXXX . (Body-
worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. ii The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID XXX XXXX. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com (see note).
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Note: The URL http://phonefacts.net may be used in place of http://www.wow-com for direct access to SAR information. Contents Unpacking . 7 Your Phone Phone Layout . 8 Display . 11 Backlight . 13 Service Light . 13 Getting Started Installing Battery . 14 Charging a Battery . 15 Switching the Phone On/Off . 18 Your Phones Modes . 19 Call Functions Making a Call . 21 Correcting the Number . 21 Ending a Call . 22 Redialing Last Number . 22 Speed Dialing from Phone Book Memory . 23 Four-Digit Dialing . 25 Answering a Call . 26 Quick Switching to Vibrate Mode . 27 In-Use Menu Options . 27 Viewing Missed Calls . 29 Call Waiting . 30 Three-Way Calling . 31 Call Forwarding . 32 Using the Display Notepad . 32 Adjusting the Volume . 33 iii 1 Contents (continued...) Entering Text Changing Text Input Mode . 35 T9 Stroke Mode . 36 T9 English Mode . 42 Alpha(ABC) Mode . 47 Symbol Mode . 49 Number Mode . 49 Using the Menus Accessing a Menu Functions by Scrolling . 50 Accessing a Menu Functions by Using its Shortcut . 53 List of the Menu Functions . 54 WAP Service WAP Service (MENU 1.1) . 58 Modem Setting (MENU 1. ) . 64 Orange Menu . 66 Calls Outgoing (MENU 3.1) . 67 Incoming (MENU 3.2) . 68 Delete Number (MENU 3.3) . 69 Air Time (MENU 3.4) . 69 Answer Mode (MENU 3.5) . 70 Phone Book Find Name (MENU 4.1) . 71 Add Entry (MENU 4.2) . 75 Edit Group (MENU 4.3) . 77 My Phone Number (MENU 4. ) . 78 PIM Scheduler (MENU 5.1) . 79 To Do List (MENU 5.2) . 81 Calculator (MENU 5.3) . 82 Set Time (MENU 5.4) . 83 Alarm (MENU 5.5) . 84 World Time (MENU 5.6) . 86 D-Day (MENU 5.7) . 87 Game (MENU 5.8) . 88 Lady Function (MENU 5.9) . 89 Message Rx Message (MENU 6.1) . 94 Display Greetings (MENU 7.1) . 98 Background (MENU 7.2) . 99 Date (MENU 7.3) . 102 Back/SVC Light (MENU 7.4) . 103 Language (MENU 7.5) . 104 Sounds Ring Type (MENU 8.1) . 105 Ring Tone (MENU 8.2) . 106 Ring Volume (MENU 8.3) . 106 Connect Tone (MENU 8.4) . 107 Release Tone (MENU 8.5) . 107 DTMF Tone (MENU 8.6) . 107 2 3 Setup Restrict (MENU 9.1) . 108 NAM Phone Number (MENU 9.2) . 109 Send PIN (MENU 9.3) . 110 Vocoder (MENU 9.4) . 110 Auto Lock (MENU 9. ) . 111 Initialize (MENU 9. ) . 122 Reference Information Accessories . 113 Using the Batteries . 114 Precautions When Using Batteries . 114 Safety Information . 116 Road Safety . 116 Operating Environment . 117 Care and Maintenance . 118 Emergency Calls . 120 Glossary . 121 Safety Precautions and Important Notices Read these simple guidelines. Failure to comply with these guidelines may be dangerous or illegal. For more detailed safety information, see Safety Information on page 116. Road safety comes first Do not use a hand-held phone while driving; park the vehicle first. Remember that in some countries, it is illegal to use a hand-held phone while driving. Switch off when refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals. Switch off in aircraft Mobile phones can cause interference. Using them on aircraft is both illegal and dangerous. Switch off in hospital Follow any regulations or rules. Switch the phone off near medical equipment. Respect special regulations Follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital, for example). 4 5 SSaaffeettyy PPrreeccaauuttiioonnss Interference All mobile phone may be subject to radio interference, which may affect their performance. Use qualified service Only qualified service personnel must install or repair cellular equipment. Use sensibly Use only in the normal position (to ear). Do not touch the antenna unnecessarily when the phone is switched on. IMPORTANT! Use only accessories approved by the phone manufacturer. This apparatus is intended for use when supplied with power from SAMSUNG approved Travel charger. The use of any other types will invalidate any approval or warranty applying to the phone, and may be dangerous. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. Unpacking Your package contains the following items. Handset Travel Charger Battery Hand Strap Users Manual In addition, you can obtain the accessories for your phone from your local SAMSUNG dealer. For information on the accessories, see page 113. 6 7 Your Phone Phone Layout With the phone close The following illustrations shows the main elements of your phone. Earphone jack YYoouurr PPhhoonnee Antenna Service Light External LCD With the phone open Earpiece Display Navigation/
Hot keys OK/Messages key End key Clear key Menu key Volume/Scroll keys Send key Alphanumeric keys 8 Special function keys Microphone Keys Functions Enters the menu facility. Also, scrolls through the main menus. In the menu facility, confirms the selection and input. In Standby mode, enters the Messages menu. In the menu facility, scroll through the menu options and phone book memory, and select a menu function or stores information that you have entered. In Standby mode, allow you to enter the following menus depending on the direction.
: Phone Book (listed by names)
: Lady function
: Scheduler
: WAP Service 9 YYoouurr PPhhoonnee Keys Functions Makes or answers a call. In Standby mode, recalls the last number dialed. Deletes characters from the display. In the menu facility, returns to the previous menu level. In Standby mode, displays the digital clock while pressed and held. Ends a call. Also switches the phone on and off when pressed and held. In the menu facility, cancels your input and returns to Standby mode.
Enters numbers, letters and some special characters. Use these keys for various purpose in different functions.
(on the side of the phone) In Standby mode, adjust the key volume. During a call, adjust the earpiece volume. In the menu facility, scrolls through the menu options. YYoouurr PPhhoonnee Display The display comprises two areas: an upper line of icons, and the lower text and graphic area. The following icons display at power-on:
Icons Text and graphic area Signal strength : Shows the received signal strength. The greater the number of bars, the better the signal strength. Service: Appears when a call is in progress. No service indicator: Appears when you are outside a service area. When it appears, you cannot make or receive calls. Wait a little while for a signal or move into an open area. Alarm: Indicates that you have set an alarm. 10 11 YYoouurr PPhhoonnee YYoouurr PPhhoonnee New message: Appears when a new message has been received. Text Input Mode: Indicates the current text input mode when entering text. For details on the text input modes, see page 34. Vibrator on: Appears when a vibrate mode is on. An incoming call will vibrate the phone rather than ring it. Roaming: Appears when you are out of your home area and have registered with a different network (when travelling in other countries, for example). Battery strength: Shows the level of your battery power. The more bars you see, the more power you have left. External LCD Your phone has an external display on the cover. It indicates that you have an incoming call or a message, and notifies you at the specified time when you have set an alarm. When you press and hold down the volume keys on the left side of the phone with the phone closed, the backlight of the external display illuminates. Backlight The display and keypad are illuminated by a backlight. When you press any key, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Backlight option set in the Display menu. The backlight remains on at all times when the phone is connected to a Hands-Free Car Kit (optional). To specify the length of time for which the backlight is active, set the Backlight menu option (7.4.1) in Display; see page 103 for further details. Service light The service light is at the top right of the phone. It flashes to indicate incoming call or message. Also, the service light flashes for a few seconds when you turn on the phone. To activate or deactivate use of the service light, set the SVC LED menu option (7.4.3); see page 104 for further details. 12 13 Getting Started Installing Battery To Install the Battery 1. Place the battery on the base of the phone, as shown. GGeettttiinngg SSttaarrtteedd To Remove the Battery 1. If necessary, switch off the phone by pressing and holding down until the power-off animation plays. 2. Push down the catch and hold it in the position.
), then slide the battery away (
). 2. Slide the battery up towards the catch until it snaps into place. Make sure that you have installed the battery correctly before switching the phone on. Charging a Battery Your phone is powered by a rechargeable Li-ion battery. A travel charger is provided with your phone. Use only Samsung-approved batteries and chargers. Ask you local SAMSUNG dealer for further details. The phone can be used while the battery is charging. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 180 minutes. 14 15 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd 1. With the battery in position on the phone, connect the lead from the travel charger to the jack on the bottom of the phone. Low Battery Indicator When the battery charge level is almost empty and only a few minutes of talk time remain, an empty battery icon (no bars displayed) blinks in the top right corner of the display. You will hear a warning tone. 2. Plug the power cord of the charger into a standard wall outlet. 3. When charging finished (the indicator on the SAMSUNG 0 5 / 0 3 [ T H U ] 1 0 : 0 8 A When the battery becomes too weak for the phone to operate, it switches off automatically. connector of the charger turns green), disconnect the charger from the power outlet and remove it from the phone by squeezing the two tabs on the lead(
) and unplug the lead (
). 16 17 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd Switching the Phone On/Off 1. Open the phone. 2. Press and hold down to switch the phone on. The service light of the phone flashes, and an alert sounds. When the system locates services, the greeting message displays along with the date and time. The external LCD shows the signal strength, battery strength and current time and date. SAMSUNG 0 5 / 0 3 [ T H U ] 1 2 : 2 5 P 12:25 PM 5 / 0 3 T H U If the phone is out of service, the icon appears in the display. In this case, you cannot place and receive calls. You can try again later when service is available. If your phone is locked, the Lock icon displays. Enter the four-digit lock code to use the phone. To unlock your phone, deactivate the Auto Lock menu option (Menu 9-
111.
). For details, see page 3. When you wish to switch the phone off, press and hold down begins to play. until the power off animation WARNING!
Do not switch on the phone when the mobile phone use is prohibited or when it may cause interference or danger. Note: Your phone has a built-in antenna. As with any other radio-transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Your Phones Modes Standby Mode Standby is the most basic state of your phone. The phone goes into Standby mode soon after you turn it on, or whenever you briefly press
. When your phone is in Standby mode, you will typically see the greeting message and current date and time. If you enter a phone number, you can press to dial it. at any time to return to Standby mode. Be
, you Press careful; if you are on a call when you press will return to Standby mode, but it also disconnects the call. Press several times or hold it down to return to Standby mode without ending the call. 18 19 GGeettttiinngg SSttaarrtteedd Talk Mode You can place and answer calls only when your phone is turned on. During a call, the phone is in Talk mode. While you are in Talk mode, pressing gives you a list of options referred to as In-Use Menu Options. See page 27 for details on the options. Power Save Mode Your phone comes with a Power Save feature that will automatically be activated if your phone is unable to find a signal after 15 minutes of searching. While this feature is active, the phones battery charge is conserved. The phone will automatically recheck for a signal periodically. To manually force the phone to recheck for a signal, press any key. A message on the display will let you know when your phone is operating in Power Save Mode. Lock Mode You can lock your phone to keep your phone away from an unauthorized use. in the idle screen and no key operates, When your phone in Lock mode, you can see the Lock icon except and the numeric keys for entering the lock code. You can unlock the phone temporarily by entering the lock code and use the phone. For details on locking and unlocking your phone, page 111. Call Functions Making a Call In Standby mode, enter the area code and phone number, and press . The phone places the call to the entered phone number. When entering the phone number, pressing allows you to access the following Dial options. Phonebook: allows you to save the number in your phone book. For details on saving a numbers, see page 75. Pose: inserts a pause. The numbers after a pause will be dialed after a few seconds. Press until the desired one is highlighted, and press . Correcting the Number If you make a mistake while entering numbers, clear the wrong number using and enter the correct number. To clear... Then press... The last digit displayed
. The whole display and hold down for more than one second. 20 21 CCaallll FFuunnccttiioonnss Ending a Call When you have finished your call, briefly press
. The call time (length of call) displays with the name
(if saved in phonebook) and number of the call party. If the number is no stored in your Phone Book, your phone prompts you to save the number. Press save the number. For further details on saving a number, see page 75. If you do nothing, the phone automatically returns to Standby mode after about ten seconds. to Or, close the phone to end a call. Redialing Last Number To redial the last number you called, press twice. The phone stores the last 10 numbers dialed. To recall any of these numbers, proceed as follows. 1. If necessary, press to return to Standby mode. 2. Press to access the list of outgoing calls. 3. Press to scroll through the list until the required number is displayed. Then, press to dial the displayed number. CCaallll FFuunnccttiioonnss Speed Dialing from Phone Book Memory Once you have stored phone numbers in the phone book memory (001 through 199), you can dial them easily whenever you want. See page 75 for details on storing phone numbers. One-Touch Dial Memory locations 001 through 009 are special one-
touch locations. Press and hold the last digit of the memory location containing the number to be dialed. For example: Location no. 009 Press and hold. The number (and name) stored is displayed, then dialed. Two-Touch Dial Memory locations 010 through 099 are special two-
touch locations. Press the second digit briefly, then hold down the third digit of the memory cell. For example: Location no. 023 Press briefly and hold down . The number (and name) stored is displayed, then dialed. 22 23 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Three-Touch Dial Memory locations 100 through 199 are special three-
touch locations. Press the first and the second digit briefly, then hold down the third digit of the memory cell. For example: Location no. 129 Press and briefly and hold down . The number (and name) stored is displayed, then dialed. Note: When several numbers are saved in one location, only the first-saved number which was automatically set as the speed dial number for the location will be automatically dialed. You can change the Speed Dial number while editing. For details, see the options in Finding a Number by its Name on page 72. Four-Digit Dialing This feature allows you to enter any four consecutive digits of a stored phone number, have your phone remember the rest of the number and then dial the entire number for you. This feature is convenient if you have the number memorized, but you have forgotten what Phone Book location the number is stored in. 1. Enter any four digits of a phone number that you have stored in Phone Book. 2. Press . The phone automatically dials the entire number. Note: If your Phone Book has more than one phone number stored that contains the four digits, The phone displays the number of the phone numbers containing those four digits with the name. Scroll through the listed phone numbers using to select the desired number. 24 25 CCaallll FFuunnccttiioonnss Answering a Call When somebody calls you, the phone rings and the phone icon in the middle of the screen flashes. t h i s c h e c k t h e p h o n e . W e c a n n o t f r o m s c r e e n CCaallll FFuunnccttiioonnss Quick Switching to Vibrate Mode You can quickly set your phone to vibrate when a call comes in. Press and hold in Standby mode. If you press and hold the key again, the previously set ring type will be resumed. nnnn Callers name or number If you want to set the phone to ring or any other ring type, see Ring Type on page 105. If the caller can be identified, the callers phone number (or name if stored in your phone book) is displayed. If the caller cannot be identified, only the phone icon flashes. 1. If necessary, open the phone and press to answer a call. If the Answer Mode menu (3.5) is set to Anykey, you can press any key except . 2. End the call by closing the phone or pressing
. Note: You can answer a call while using the Phone Book or menu features. Your setting will be canceled. In-Use Menu Options Your phone provides a number of functions that you can use during a call. You cannot utilize all of these functions at all times. Many of the In-Use Menu Options are network services. during a call to choose some or all of the Press following In-Use Menu options:
Phone Book: allows you to access the Phone Book menu (Menu 4). Message: allows you to access the Messages menu
(Menu 6). 26 27 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss
(Un)Mute: allows you to switch your phones microphone off, so that the other party cannot hear you. Example: You wish to say something to another person in the room but do not want the other party to hear you. Silent Key: does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call. Note: To communicate with answering machines or computerized telephony systems, the Silent Keys option must be disabled. Send Tel #: sends DTMF tones of your number. During a call, some keys have special functions.
: sends DTMF tones of the currently displayed number. DTMF (Dual Tone Multi Frequency) tones can be used to control electronic phone services such as bank-by-phone or voice mail. During a call, key in the digits you want to send as DTMF tones, for example, the bank account number and password. Then, press this key.
: increases reception of the microphone so that the other party can hear your voice more loudly.
: decreases reception of the microphone so that you can make your voice lower. Viewing Missed Calls Your phone keeps a list of calls that you do not answer when the phone is on and service is available. The phone indicates a missed call by displaying a text notification on the screen. Additionally, if caller information is available, the phone displays the phone number of the most recent missed call. Press to call the displayed number, or to clear the message and return to Standby mode. Dropped Calls A dropped call can occur during a conversation in response to a signal fade or leaving a service area. In this case, the call ends and Signal Faded displays. Press Standby mode. to clear the message and return to Failed Calls A failed call can occur if your phone is out of calling range or the network is temporarily busy. Your phone responds to a failed call by displaying an appropriate message: Call Failed Out of Range or Call Failed Network Busy. Press Standby mode. to clear the message and return to 28 29 CCaallll FFuunnccttiioonnss Call Waiting Call Waiting lets you receive a second call during conversation. Your phone notifies you of a call waiting by beeping an displaying Call Waiting. Your phone provides the option of turning the Call Waiting feature on and off (if you have subscribed to the service). Call Waiting is on by default in the phone. If you choose to have a undisturbed conversation, simply turn off the feature for the current call. Note: Contact your service provider to activate the Call Waiting service. To answer a waiting call:
1. To answer the call, press . The phone connects the calling party, and places the current party on hold. 2. Press again to switch between two parties. Note: If you do not respond to a Call Waiting notification, the phone will forward the call to voice mail or another number that you have set up. Contact your service provider for more details. CCaallll FFuunnccttiioonnss Three-Way Calling This feature enables you to conduct conference calls with two separate parties at the same time. The phone records each party into the Outgoing Calls Log. Also, you are billed airtime for each of the outgoing calls separately. Note: Contact your service provider to activate Three-Way Calling. To place a Three-Way call:
1. During a conversation, press . The phone places the other party on hold. 2. Enter the phone number for the third party, and then press . The phone dials the third party. 3. When you are connected to the third party, press again to begin your three-way call. If one of the callers (not you) hangs up, you and remaining caller stay connected. If you initiated the call and you hang up first, all three parties are disconnected. 30 31 CCaallll FFuunnccttiioonnss Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the volume keys on the left side of the phone. Press to decrease the volume. to increase and In Standby mode, you can adjust the key volume using these keys. CCaallll FFuunnccttiioonnss Call Forwarding This feature provides the option of forwarding incoming calls to another phone number, even while your phone is off. Activating Call Forwarding does not affect outgoing calls made from this phone. Contact your service provider to activate Call Forwarding. Using the Display Notepad Your phone has a really convenient feature for entering a phone number while on a call as if it were a note pad. Say you are talking to a friend who wants to give you a phone number. Just enter the number using the keypad, and the number appears on the display. Then, when you hang up, the number remains in the display so that you can press to be immediately connected to that party. Or press , select Phonebook and follow the prompts to store the number into your phone book. For details on saving a number, see page 75. 32 33 Entering Text The phone allows you to enter characters for messages and names in Chinese and English. To enter Chinese text, the phone provides character shape based (Stroke) input method allowing for greater convenience and ease of use. You can also enter any combination of English alphabets, numbers, and special symbols including punctuation marks. You are provided with the following text input modes;
Symbol: allows you to enter various symbols and special characters. Number: allows you to enter numbers. T9 Stroke: allows you to enter the Chinese character using the individual strokes labeled on keys. T9 English: allows you to enter the English characters with only one keypress per character. Alpha(ABC): allows you to enter English characters by pressing the key labeled with the desired character repeatedly until the character displays. Note: You can enter numbers in each mode by pressing and holding the keys corresponding to the desired digits. EEnntteerriinngg TTeexxtt Changing Text Input Mode When you are in a field that allows character entry, you should notice the text input mode indicator in the bottom of the display. Text mode indicator You can change between Chinese input methods, and English or to numbers input. To change to another text input mode:
1. Press to access the Input Mode menu. 2. Scroll to the desired mode by pressing or repeatedly. The following options are available; Symbol, Number, T9 Stroke, T9 English and Alpha(ABC). 3. When the mode is highlighted, press to select it. 4. You will find the selected text input mode indicator in the top line of the display. Currently selected mode:
T9 English 34 Note: If you want to exit the Input Mode menu without changing the mode, press . 35 EEnntteerriinngg TTeexxtt T9 Stroke Mode This mode allows you to enter individual Chinese strokes, in written order - from top to bottom, and from left to right. When the phone is in the T9 Stroke mode, keys behave as follows:
Text Area Displays the selected characters. Character Selection Map Displays possible characters based on keystrokes you have entered. MENU Key Allows you to access Input Mode menu to change the text input mode. Stroke Keys Press keys to generate strokes used to build characters. When pressed in the correct order, appropriate characters are displayed in the Character Selection Map. 36 EEnntteerriinngg TTeexxtt Mode Indicator Displays the current text input mode. Keystroke Area Displays the keystrokes you have entered to compose the current character selections. Scroll Keys and move the cursor left or right through your text message. and scroll through text modes available when you access the Input Mode menu. OK Key Saves the entered text. Clear Key Deletes keystrokes from the Keystroke Area and/or characters from the Text Area. Wildcard Key Press this key to add a stroke to a character when you are not sure what stroke to add next. 37 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Even though there are many different strokes used to create Chinese characters, the strokes are classified into 5 basic categories; heng, shu, pie, dian and zhe. The basic strokes are printed on the keypad, on keys to . To enter a stroke, press the key printed with the stroke that most closely represents the exact stroke you desire. The table shows the stroke/key relationship:
Categories Keys Strokes represented in each categories Typing Stokes and Characters in Stroke Mode 1. To type a character, press keys corresponding to its component strokes. Press keys on the handset in the order that you would write the strokes, using one press per desired stroke. Example: Typing (
) in Stroke mode Key Stroke Area. Press to enter , then to enter . Character Selection Map. To select , press . 2. The phone displays your strokes in the Key Stroke Area and offers character choices in the Character Selection Map. As you enter strokes, notice that the choices in the Character Selection Map change. 38 39 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt 3. When the character you are typing appears in the Character Selection Map, you may select it without finishing the stroke sequence for the character. The numbered Characters (1 ~ 5) displayed in the Character Selection Map. To select a character from the Character Selection Map and add it to your message, press the corresponding key to . Note: If you are uncertain of the order of one or more strokes, press in place of each questionable stroke. Continue entering strokes until the character is displayed in the Character Selection Map or until you have finished the character. Clearing Strokes and Characters Press one or more times to remove strokes to the left. Once the Key Stroke Area is empty, pressing removes characters from the Text Area. Rapid Character Entry Rapid character entry is easy in any mode, using the Character Selection Map. As you enter characters, your phone predicts the next character you might want and presents choices in the Character Selection Map area. When a desired character appears, you may select it as described above. In most cases, you will see the desired character in the Character Selection Map area before you have entered all of the strokes to build it. For example, try typing the twelve stroke character pair using the following keystrokes; ,
, . Even though is a twelve stroke character pair, your phone enables you to type it in only three key presses!
40 41 EEnntteerriinngg TTeexxtt T9 English Mode This mode allows you to enter English words with only one keypress per letter. Each key on a keypad has more than one letter - a single press on the key could be J, K, or L. The T9 English mode automatically compares your key presses to an internal linguistic database to determine the correct word. Text Area Displays the selected characters you entered. MENU Key Allows you to access Input Mode menu to change the text input mode. Smart Period Key Press this key to enter a period (.) quickly. Case Shift Key Press this key repeatedly to switch between Initial Caps, Caps Lock, and Lower Case letters. 42 EEnntteerriinngg TTeexxtt The mode requires far fewer keystrokes than the traditional multi-tap method; Alpha(ABC) mode. When the phone is in the T9 English mode, keys behave as follows:
Mode/Case Shift Indicator Displays the current text input mode and shift mode;
indicates Initial Capital, means Lower Case. indicates Capital Lock. Scroll Keys and move the cursor left or right through your text message. and scrolls through text modes available when you access the Input Mode menu. OK Key Saves the entered text. Clear key Press this key to delete characters from the Text Area. Letter keys Space Key Inserts a space into your message. Alternate Word Key Displays alternate word choices for the keys you have typed. 43 EEnntteerriinngg TTeexxtt Typing English Words To type a word, press keys corresponding to the letters you need. Remember the following as you are typing:
1. Press keys on the handset just once per desired letter. For example, to enter hello, press ,
, , , . . 2. The word you are typing appears in the display. It may change with each key you press. 3. Type to the end of the word before editing or deleting any keystrokes. 4. Complete each word with a space by pressing . If the word that appears in the display is not the word that you desire, press one or more times to display alternate word choices for the keys you have typed. (For example, of and me both shares the sequence , . ) The phone displays the most commonly used choice first. To type words not found in the phone database, change the text input mode to English mode. Words typed in English mode are automatically added to the phone database so you can type them using T9 English mode the next time. EEnntteerriinngg TTeexxtt Smart Punctuations Period, hyphen, and apostrophe are available on
. T9 applies rules of grammar to insert the correct punctuation. Notice that is used twice in this example to display two punctuation marks:
L E T S E A T . Upper Case Letters There are three shift states:
Lower Case (
Initial Cap (
Caps Lock (
indicator appears) indicator appears) indicator appears) Press one or more times to display the appropriate shift indicator, and begin typing normally. Case shift indicator 44 45 EEnntteerriinngg TTeexxtt Scrolling To view your message without moving the cursor, press the volume keys on the left side of the phone. To move the cursor left or right through your text message, press or . To scroll through alternate word choices for the keys you have entered, press . Clearing Letters and Words Press one or more times to remove letters to the left. Press and hold to erase entire words. EEnntteerriinngg TTeexxtt Alpha(ABC) Mode When typing in English mode, you should press key labeled with the required character:
-Once for the first character
-Twice for the second character and so on. For example, you press three times quickly to display the character C , two times quickly to display the character L. So, this method is called Multi-tap typing. Refer to the table below for the list of characters assigned on each key. List of characters available:
Key Characters in the Order Displayed
. , ? ! - @ : 1 B A E D H G J K M N Q P T U W X 0 C F I L O R V Y 2 3 4 5 6 S 8 Z 9 7 46
(Caps Lock mode) 47 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt To shift the case of the next character(s) that you type, press one or more times. There are two shift states:
Lower Case is indicated by Capitals Lock is indicated by in the display, and
. The cursor moves to the right when you press a different key. When entering the same character twice (or a different character on the same key), just wait for a few seconds for the cursor to move right automatically, and then select the next character. If you enter a specific word in this mode the first time, the word is automatically added to your phones database, and offers the new word as an option for its keystroke sequence when you are in T9 English mode. To move the cursor left or right through your text message, press or . To insert a space, press . Press one or more times to remove letters to the left. Press and hold to erase entire words. Symbol Mode Symbolic mode enables you to enter symbols into a text message. To scroll through the symbols available, press or (or or on the left side of the phone). Press the keys corresponding to the desired mark, then the phone automatically switches back to the text entry mode used just prior to selecting Symbol mode. Number Mode Number mode enables you to enter numbers into a text message. Press keys corresponding to the desired digits, and manually switch back to the text entry mode of choice. Note: You can enter numbers in the other modes by pressing and holding the keys corresponding to the desired digits without changing to Number mode. 48 49 Using the Menus The phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and submenus. The menus and submenus can be accessed by scrolling or using the shortcuts. Accessing a Menu Functions by Scrolling UUssiinngg tthhee MMeennuuss Example: Setting the SVC LED menu option. 1. In Standby mode, press to access the menu facility. 1 WAP Service The following keys are used to set the menu option by scrolling then selecting an option. 2. Scroll to Display by pressing . Then, press to enter the selected menu. To... Then press... Enter the menu facility Scroll to the desired menu options Enter the menu displayed or the highlighted option Move back to the previous menu level Exit the menu facility without saving the setting 7 Display 3. Scroll to Back/SVC Light by pressing . Then, press to enter the menu. Display 1:Greetings 2:Background 3 : D a t e 4:Back/SVC Light 5:Language 50 51 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss 4. Select SVC LED by pressing and pressing
. Back/SVC Light 1:Backlight 2:LCD Control 3:SVC LED 5. Select the desired setting by pressing . Set SVC LED?
S e t Cancel 6. Press to confirm your selection. Your phone saves the setting and then returns to Standby mode. Accessing a Menu Functions by Using its Shortcut The menu items (menu, submenus and setting options) are numbered and can be accessed quickly by using their shortcut number. 1. In Standby mode, press
. 2. Within three seconds, key in the first digit of the shortcut number. Repeat this for each digit of the shortcut number. Example: Accessing the SVC LED menu Press , and key in , , . MENU for entering the menu facility, 7 for Display, 4 for Back/SVC Light, 3 for SVC LED. 3. Press to scroll to the desired setting, and press to confirm the chosen setting. Note: The numbers assigned to each menu function are indicated on the list on page 54. 52 53 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss List of the Menu Functions The list shows the menu structure available and indicates the:
Number assigned to each option Page on which you can find a description of each feature 1. WAP Service 1-1: WAP Service 1. : Modem Setting Page 58 1- -1: Connect Sound 1- -2: Auto Connect 1- -3: High Rate Data 2. Orange Menu Page 66 This menu depends on what the orange network provides you. 3. Calls 3-1: Outgoing 3-2: Incoming 3-3: Delete Number Page 67 3-3-1: Erase Outgoing 3-3-2: Erase Incoming 3-4: Air Time 3-5: Answer Mode 4. Phone Book 4-1: Find Number Page 71 4-1-1: Name 4-1-2: Address 4-1-3: Group 4-2: Add Entry 4-3: Edit Group 2-3-1: Add 2-3-2: Edit 2-3-3: Erase 4-#: My Phone #
5. PIM 5-1: Scheduler 5-2: To Do List 5-3: Calculator 5-4: Set Time 5-5: Alarm Page 79 5-5-1: Morning Call 5-5-2: M.C. Release 5-5-3: Alarm 5-5-4: Alarm Release 5-5-5: Alarm Melody 5-6: World Time 5-7: D-Day 5-8: Game 5-9: Lady Function 5-9-1: Fatness Index 5-9-2: Calory 5-9-3: Pink Schedule 54 55 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss 6. Message 6-1: Rx Message Page 94 9. Setup (Lock code required) 9-1: Restrict Page 108 6-1-1: Voice Mail 6-1-2: Text 6-1-3: Erase All 6-1-4: Alert 6-1-5: Display 7. Display 7-1: Greetings 7-2: Background Page 98 7-2-1: Power On/Off 7-2-2: Wall Paper 7-2-3: Screen Saver 7-2-4: Text Slide 7-3: Date 7-4: Back/SVC Light 7-4-1: Backlight 7-4-2: LCD Control 7-4-3: SVC LED 7-5: Language 8. Sounds 8-1: Ring Type 8-2: Ring Tone Page 105 8-2-1: Bell 8-2-1: Melody 8-2-1: CDMA Melody 8-2-1: My Melody 8-3: Ring Volume 8-4: Connect Tone 8-5: Release Tone 8-6: DTMF Tone 56 9-1-1: Lock Code 9-1-2: Private Life 9-1-3: Memory 9-1-4: Receiving Call 9-1-5: Int. Call 9-1-6: Incoming Num. 9-2: NAM Phone#
9-3: Send PIN 9-4: Vocoder 9- : Auto Lock 9-#: Initialize 9-1-7: Clear All 9-1-7: Reset Phone 57 WAP Service You can use the WAP Service menu to:
Launch the WAP browser to access the Internet Set the modem for network services WAP Service Menu 1.1 Your phone comes equipped with a Web Browser makes it possible for you to access the Wireless Web. The Web Browser allows you to access up-to-the minute information through your phone. Browsing the Wireless Web through your phone is unlike using your computer in that site providers have selected only the critical aspects of their site to present to wireless phone users, and have removed most graphics.
) will appear on the display. Any Each time you start the Web Browser, the phone will connect to the Wireless Web and the service indicator icon (
time the service indicator icon is visible on the display, you are connected to the Wireless Web and will be billed accordingly. Rates will vary according to your service option. The Web Browser will end the connection after a certain period of network inactivity and will automatically reconnect as necessary. For this reason, you may find that you are billed for several network connections within a single session. This is normal and is designed to minimize your bill. 58 WWAAPP SSeerrvviiccee Launching the WAP Browser Note: The first time you use the WAP Browser, you will go through a security setup process that takes 3 to 5 minutes. Please follow the on-
screen prompts to complete the security setup process. This initial setup process occurs only the first time you access the service. 1. Accessing the WAP Service menu connects your phone to the Wireless Web. You can quickly access WAP Service menu by pressing in Standby mode. 2. Once connected, the Home page (or the last page visited) will be displayed. 3. The opening page when accessing the WAP Browser is dependent on the Wireless Web service provider content. To scroll through the screen, use or . Exiting the WAP Browser To exit the Browser, simply press at any time. Using the WAP Browser Soft Keys At the bottom of the browser display is a solid bar which contains browser commands. Soft keys
( and ) below the solid bar are used to execute the commands. These two keys are called soft keys because their function changes depending on where you are in the WAP Browser software. 59 WWAAPP SSeerrvviiccee WWAAPP SSeerrvviiccee Navigating the WAP Browser When you use the WAP Browser, some keys on your phone operate differently than on a normal phone call. These keys are explained below. The Web Browser presents on-screen items in one of the following ways:
text or numeric input links (embedded in content) numbered options (some options may not be numbered) simple text You can act on the options or links by making use of the soft keys. The soft keys are located below the bottom line of the display. Heres how the keys work in the Web Browser:
Up/Down Navigation Key: Use the navigation key to scroll to and select browser options. The currently selected option is indicated by the symbol. You can also use the navigation key to move the cursor when editing text. MENU Key: This is the left soft key. The right soft key is used primarily for secondary options, or a menu of secondary options. For more information, see Using the WAP Browser Soft Keys. on page 59. OK Key: This is the right soft key. The left soft key is used primarily for selecting the highlighted item, but its function may change depending on what you are doing
(see Using the WAP Browser Soft Keys. on page 59). END Key: Exits the browser and returns the phone to Standby mode. Right Cursor Key: Moves the cursor right in a text entry. Left Cursor Key: Moves the cursor left in a text entry. CLR Key: This key performs two important functions:
Backs you up in the browser. Pressing it once backs you up one page. Pressing and holding this key backs you up to the Home page. Clears out entered text or numbers. When entering numbers or text, press this key to clear the last number, letter, or symbol. Press and hold this key to completely clear the input field.
Numbered Keys 0 - 9: If the items on a page are numbered, you can use these keys to select them. Volume Key: Allows you to scroll up or down by a page. 60 61 WWAAPP SSeerrvviiccee WWAAPP SSeerrvviiccee Entering Text, Numbers or Symbols in the Web Browser When prompted, you can enter text, numbers or symbols using the same way as in the phone mode. See page 34 on how to enter letters. Using Links Links have several purposes, including jumping to a different page, jumping to a different site, or even initiating a phone call from some sites. Links are shown inside of brackets ( [ ] ), and you can normally use the left soft key to select a link when it is highlighted. Initiating a Phone Call during a Web Browser Session You may initiate a phone call from the Web Browser if the site you are using supports this feature (the phone number may be highlighted and the left soft key will appear as Call.). In most cases, you can also use to call the number. The browser connection will be terminated when you initiate the call. After you end the call, your phone will return to Standby mode. Using Bookmarks You can bookmark many individual pages for easy access at a later time. Bookmarks save you time by reducing the number of steps it takes to access a desired page. To Create a Bookmark 1. Go to the page that you want to mark. 2. Press and hold . A list of options appears. 3. Select Mark Site. 4. If the page has a title, it will be automatically used for the name of the bookmark. You can also change the bookmark name. Selecting Save will save the name and add the page to your list of bookmarks. 5. A message will appear confirming that the bookmark was added to the list. Select OK to return to the screen that you marked to resume navigation within the Web Browser. 6. The new bookmark is added to the bottom of your bookmark list. Finding a Bookmark 1. From the Home Page, select Bookmarks. 2. Select the bookmark you want and press . Or, from the Home Page, press and hold the number associated with the bookmark in the bookmark list. 62 63 WWAAPP SSeerrvviiccee Modem Setting Menu 1. Auto Connect WWAAPP SSeerrvviiccee Your phone is capable of receiving digital data and fax call when connected to a computing device
(laptop, desktop, handheld, palmtop, etc.) running Windows 95, Windows 98, or Windows NT. The phone functions just like a typical modem on your PC, enabling you to use wireless data involving a side variety of Windows software applications. To use digital data or fax services with your phone, you will need to obtain digital data/fax kit from your service provider. This kit will contain the necessary cables, software, and documentation required for your to connect and use your phone with your computing device. Refer to your data kit manual for further details on setting up your computing device. Note: The phone must be on a digital network to receive fax and data. Connect Sound This option allows you to set how you are alerted when the phone receives data or fax calls. You can see the current setting marked with *. The following options are available. Bell: you can select the desired one of 5 bell types. Melody: you can select the desired one of 15 melodies. My Melody: you can select your favorite melodies downloaded using your WAP service or the PC Link program. You can download up to three melodies. 64 You can set the phone to functions as a modem to receive data and fax calls. Release: The reception mode for the data and fax is released. Your phone only receive the voice calls. Modem Connect: The reception mode for data is set. The phone automatically receives incoming data when the data cable is connected. Fax Connect: The reception mode for fax calls is set. The phone automatically receives incoming fax calls when the data cable is connected. High Rate Data You can set the transmission rate for data and fax to high. Select Set to receive data in high rate. If not, select Cancel. 65 Orange Menu Calls Using this menu, you can get various information from the Orange network service, such as Stock, Horse racing, Weather, Traffic, News, and so on. Select an item about which you want to get information, and you are now connected to the Orange network and have a unique range of services at your fingertips. For details on the Orange menu, contact your service provider. 66 You can use the Calls menu to:
View the records of the last outgoing or incoming calls. Erase the numbers in the Call log memory. View the duration of calls and specify the answer mode. Outgoing Menu 3.1 The phone stores up to 10 calls you dialed. When you access this menu, the list of outgoing calls are displayed. Press... To... Select an entry Dial the selected entry View the details on the call When you press , you can view the date/time stamp for the selected entry. If there is a Phone Book match, the name displays. to access Options. Highlight the desired Press one using , then press . The following options are available:
Phonebook: saves the selected number in Phonebook. For more details on saving the number, see page 75. Pose: allows you to insert a pause after the number. 67 CCaallllss Incoming Menu 3.2 Delete Number CCaallllss Menu 3.3 This option lets you view the last 10 calls placed to your phone. When you access this menu, the list of incoming calls are displayed. Press... To... Select an entry Dial the selected entry View the details on the call When you press , you can view the date/time stamp for the selected entry. If there is a Phone Book match, the name displays. to access Options. Highlight the desired Press one using , then press . The following options are available:
Phonebook: saves the selected number in Phonebook. For more details on saving the number, see page 75. Pose: allows you to insert a pause after the number. You can erase the entries stored in each of the Call Logs. Erase Outgoing: The calls you made are erased. Erase Incoming: The calls you received are erased. When a confirming message displays, highlight Yes or No using , then press . Air Time Menu 3.4 Your phone records the amount of air time (or talk time) used. Using this option, you can view the air time of the last call to or from your phone, and the air time for all calls. Tot. indicates the total length of all calls made to or from your phone since the phone was shipped from the factory and Last indicates the length of the last call. You can easily erase the airtime measurement by pressing while the air time displays . 68 69 CCaallllss Answer Mode Menu 3.5 Phone Book This menu option allows you to select how to answer when an incoming call comes. It is preset to Anykey. The following options are available:
SEND: To answer the incoming call, you must press
. Anykey: To answer the incoming call, you can press any key except . The Phone book allows you to store frequently used phone numbers and the associated names in your personal directory to make it easy for you to make a call without having to remember or enter the phone number. You can store up to 199 numbers. Find Number Menu 4.1 This option allows you to find the stored numbers in the Phone Book by name, memory address and group name. Notes:
You can locate Phone Book entries quickly when the phone is in Standby mode. Press , and the entries are listed in alphabetical order in the display. When the selected entry is displayed, press or to display to next or previous entry in the phonebook. If more than one numbers are stored by the different labels in the selected location, press or to find the desired number. 70 71 PPhhoonnee BBooookk PPhhoonnee BBooookk Finding a Number by its Name Finding a Number by its Memory Location This option allows you to find a stored number by its name. This option allows you to find a stored number by its memory address number. 1. Press when Name is highlighted 1. Press to select Address, and press . 2. Enter the starting character(s) of the name by pressing the associated alphanumeric key(s). Using this method, the phone searches for the names in the list beginning with that character(s), and then displays the first name in that section of the list. 3. Press or to scroll to the desired name. 4. When the desired entry displays, press to place a call, or to display the name with the number, label and speed dial number. With an entry selected, if you press , you can display the following options:
Edit: allows you to change phone number, name, speed dial number (if multiple numbers are saved) or group. Add: allows you to add several different kind of numbers into the name, such as work office number or mobile number. Del: deletes the number. Highlight the desired one using , then press
. 72 2. Enter the number of the desired memory address, and press . 3. The phone displays the name with the number, label and speed dial number. Press to place a call. With an entry selected, if you press , you can display the options. For details, see the options in Finding a Number by its Name on page 72. 73 PPhhoonnee BBooookk Finding a Number by its Group This option allows you to the stored number by its group name. 1. Press to select Group, and press . 2. Press to scroll to the group containing the number you want to find, and press . 3. Press until you find the desired name from the list of the numbers in the group. 4. When the desired entry displays, press to place a call, or to display the name with the number, label and speed dial number. With an entry selected, if you press , you can display the options. For details, see the options in Finding a Number by its Name on page 72. Add Entry PPhhoonnee BBooookk Menu 4.2 This menu allows you to store a number with a name in your Phone Book. You can save a persons different kinds of numbers, such as workplace number, mobile number and pager number, into one entry. Using this feature, you can keep ones information together. It also helps you to find numbers easily in Phone Book. Creating a New Entry 1. Enter the desired name for the entry, then press
. You can enter up to 10 characters for English and 5 characters for Chinese. For details on how to enter text, see page 34. 2. The first available location highlights. To accept the displayed location, just go to next step. To select another location, enter the location number using the numeric keys. 3. Press , and enter the phone number you want to store. 4. Press , and select a label using or . The available labels are: Home ( ), Office ( ), Mobile ( ), and Pager ( ). 5. Press to go to the Group item. If you do not wan to set the group, press when No Set is highlighted. The entry is saved. To set a group for the entry, go to next step. 74 75 PPhhoonnee BBooookk 6. Highlight Set by pressing , then . 7. Select desired group from the list using , then . Note: You can edit an existing group or add a new group. For details editing or adding a group, see page 77. Adding a Number in an Existing Entry You can store more than one numbers in one Phone Book location labeling each of the numbers. 1. Find the entry where you want to add a number. When the entry is displayed, press to display the options. 2. Press to select Add, and press . 3. Enter the number and press . 4. You are asked to select a label. After selecting a label using or , press . Note: You can only use each label one time for each stored name. For example, you can only have one number labeled Mobile( ) for a name entry. 5. The number and its information are displayed. Edit Group PPhhoonnee BBooookk Menu 4.3 This menu allows you to add a new group and edit or erase the exiting groups. Adding a New Group You can add up to three new groups. 1. Select Add using , then press . 2. Enter the name for the group. You can enter up to 10 characters for English and 5 characters for Chinese. For details on entering text, see page 34. 3. When you are satisfied, press . 4. Select the ring type for the group using , then press . 5. Select the desired one of the bell tones or the melody tones using , then press . Editing an Existing Group 1. Select Edit using , then press . 2. Select the group you want to edit, and press . 3. Follow the steps 2 from 5 in Adding a New Group above to edit the group. 76 77 PPhhoonnee BBooookk Erasing an Existing Group 1. Select Erase using , then press . 2. Select the group you want to erase, and press
. My Phone Number Menu 4.#
You can display your phone number using this menu. PIM The PIM (Personal Information Management) feature provides various convenient functions for your life, such as scheduler, To do list, alarm, world time, and so on. You can also enjoy several games with your phone. Scheduler Menu 5.1 This option allows you to view the current month, or a past of future month in calendar format. In Scheduler, the current date is highlighted on the calendar. Days with the scheduled events are underlined. Note: You can quickly access this menu by pressing in Standby mode. Selecting a Day in Calendar You can move up or down by one week by pressing or . You can move right or left by one day by pressing or . To display the next or previous month, press or on the left side of the phone. 78 79 PPIIMM PPIIMM Creating a New Schedule To create a new schedule on a specific date, proceed as follows. 1. Scroll to the desired date in the calendar by using
, and press . Note: To skip to the previous or next month, press or on the left side of the phone. 2. Enter the time for the event and date, if necessary, then press . Note: You must enter for hour in 24-hour format. 3. Enter the contents of the schedule and press . For details on entering text, see page 34. 4. Select the alarm type for the schedule between Bell and Melody using . If you select Off, the phone does not alarms you the schedule. 5. Press to save the schedule. You can see the day with the scheduled events are underlined in the calendar. Adding, Editing, or Deleting a Schedule When a stored schedule is displayed, press display the following options. to Edit: allows you to edit the todays schedule. Add: allows you to add a new schedule on today. Del: allows you to delete the schedule. After you select an option by pressing , press . Then follow the screen prompt. To Do List Menu 5.2 Creating the To Do List Item 1. If there is no To Do item previously set, the display prompts you to add To Do item when you access this menu. Skip to step 3. If there are any To Do items you have previously set, press to display the options. 2. Press to select Add. Then press . 3. Enter a task. For further details on how to enter characters, see page 34. 4. Press , and enter the desired date and time
. by when the task has to be done, then press 5. You can view the To Do list. 80 81 PPIIMM PPIIMM Adding, Editing and Erasing an To Do Item When a stored task is displayed, press the following options. to display Edit: allows you to edit the To Do item. Add: allows you to add a To Do item. Del: allows you to delete the To Do item. After you select an option by pressing , press . Then follow the screen prompt. Calculator Menu 5.3 Using this feature, you can use the phone as a calculator. You can perform calculations including addition, subtraction, multiplication and division on your phone. 1. Enter the first number using the numeric keys. 2. Press to set the operator for your calculation until the required arithmetic symbol appears: + (addition), - (subtraction), x (multiplication), / (division). 3. Enter the second number. 4. To perform calculation and see the result, press
. 82 5. Repeat steps 1 to 4 as many times as required. Each time you change the operator, the previous calculation is performed and the result is displayed as the top number in the display. Notes:
To erase any mistakes and clear the display, press . Use to enter a decimal point (.) and to change the sign of a number to a negative (-). Set Time Menu 5.4 The option enables you to set the current date and time. The current time, if set, displays. Enter the date and time using the numeric keys. The month, day, hour and minute must be entered with 2 digits. The year requires all four digits. And you must enter for the hour in 24-hour format. If you do not input the time or you input the wrong time, the phone prompts you to enter again. 83 PPIIMM Alarm Menu 5.5 You can set an alarm to sound at a specific time and a morning call to sound to wake you up in the morning. Note: Keep in mind that if your phone is off at the alarm set time, the alarm will not sound. In order for the alarm to work, the phone must be on, and you must be in a service area. Setting a Morning Call 1. Press to select Morning Call, then press
. 2. Press to set the Call Repeat option, then press . The available options are Daily, Mon~Friday and Mon~Saturday. 3. Enter the time when the morning call work. Note: You must enter for hour in 24-hour format. 4. When you have finished entering, press to save the setting. Releasing the morning call To cancel the morning call, select M.C. Release by pressing , then press . 84 PPIIMM Setting an Alarm 1. Press to select Alarm, then press . 2. Press to select the Alarm Repeat option, then press . If you select Daily, the alarm rings every day at the same time. If you select Once, the alarm rings only once and then deactivates. 3. Enter the time when the alarm ring. Note: You must enter for hour in 24-hour format. 4. When you have finished entering, press to save the setting. Releasing the Alarm To cancel the alarm, select Alarm Release by pressing , then press . Selecting an Alarm Melody You can select a ring melody for the alarm. 1. Press to scroll to Alarm Melody, and press
. 2. Press to select the desired one of three melodies or Vibrator, then press . Selecting Vibrator vibrates the phone instead of sounds the melody. 85 PPIIMM World Time Menu 5.6 D-Day PPIIMM Menu 5.7 This menu tells you what time it is in 24 different time zones around the world. Use to find the current time in one of the following 24 time zones. Time zones are identified by one or more major cities, states, regions or countries in a time zone. Hong Kong, Beijing Guam, Sydney Wellington Honolulu, Hawaii LA, San Francisco Chicago, Dallas Caracas Mid Atlantic London Athens, Helsinki Abu Dabi Alma-ata Seoul, Tokyo Okhotsk Samoa, Midway Alaska Denver, Phoenix New York, Miami Buenos Aires Cape Verde Rome, Paris Moscow Tashkent Bangkok, Jakarta This menu help you know how much time it takes you to do something, or how many months, days, hours and minutes until a specific day. You can create up to 5 Countdown timers using this menu. Creating a D-Day item 1. Press to display the options. 2. Press to select Add, then press . 3. Enter a title for your D-Day item and press . You can enter up to 16 characters for English and 8 characters for Chinese. For details on entering text, see page 34. 4. Enter the date and time that you want to count down to. Note: You must enter for hour in 24-hour format. 5. Press to save the item. The phone counts down to the defined day, and displays the result. 86 87 PPIIMM Adding, Editing and Erasing an To Do Item When a stored task is displayed, press the following options. to display Edit: allows you to edit the To Do item. Add: allows you to add a To Do item. Del: allows you to delete the To Do item. After you select an option by pressing , press . Then follow the screen prompt. Game Menu 5.8 This menu enables you to enjoy the games, such as Push Push, F1 Racing, Flying tight, and Run to Money. When the game start screen is displayed, press
( in Push Push) to get help in playing the game. To start the selected game, press . To end the game, press at any time. Lady Function PPIIMM Menu 5.9 The Lady Function menu allows you to check your physical condition, such as degree of fatness and the physical schedule. This menu is helpful to keep your health by checking and counting how much calories of heat some foods generate or some exercises and daily works consume. Fatness Index This menu allows you to check the fatness degree. 1. Select your gender, Male or Female, and press
. 2. Enter your weight using the numeric keys, and press . 3. Enter your height using the numeric keys, and press . 4. The phone calculates the percentage of your fatness for your height and displays the result. If the result is from 100 to 110%, you are normal. 5. Press to return to Standby mode. 88 89 PPIIMM Calory You can check and count how much calories of heat the selected foods yields or how much calories of heat the selected exercise or daily work. This feature can be useful for a diet. The following options are available. Food: allows you to check how much calories the selected food generates. Foods are categorized into 10 groups. Exercise: allows you to check how much calories the selected exercise consumes. Daily Work: allows you to check how much calories the selected exercise consumes. Checking Calories for Food 1. Select Food and press . 2. Press to select a desired kind of food, and press . 3. Press to scroll to a desired food. 4. Press and check the heat value which the food represents. If the heat value per a dish or an amount for one person is displayed, enter the desired amount or press to increase or decrease it by 1 increments. The phone immediately displays the appropriate value. 90 PPIIMM 5. Repeat steps 2 to 4 to add foods for your count. 6. When you have finished selecting food, select Total to display the sum total and press . 7. Press to return to Standby mode. Checking Calories for Exercise or Daily Work 1. Select Exercise or Daily work using and press . 2. Press to select a desired exercise or daily work, and press . 3. Check the heat value which the exercise or daily work for 10 minute represents. You can enter the desired length of time or press to increase or decrease it by 10 increments. The phone immediately displays the appropriate value. 4. Repeat steps 2 to 4 to add foods for your count. 5. When you have finished selecting, select Total to display the sum total and press . 6. Press to return to Standby mode. 91 PPIIMM Pink Schedule Using this feature, you can set your menstrual period and check your physical schedule, such as the ovulation day and the child-bearing period. To access this menu, you must enter the four-digit lock code. Your lock code is preset to 0000. Note: The schedule may be fit to your physical condition. Therefore, use this Pink schedule just for reference. Entering Your Pink Schedule 1. Press to select Enter Schedule, and press . 2. Enter the starting day of your last menstruation, and press . 3. Enter your average menstrual period, and press
. The phone displays the ovulation day and the period when you are possible to be pregnant. 4. Press to return to Standby mode. PPIIMM Checking Your Pink Schedule After entering your period, you can check your schedule at any time. Select Show Schedule using , and press . The phone displays your ovulation day and the pregnancy period. Checking Todays Probability of Pregnancy Select Todays using , and press . The phone displays the percentage of the probability. Setting Pink Schedule of Your Friends 1. Press to select Friends, and press . 2. Enter her schedule as you do when entering your schedule. 3. Press to return to Standby mode. 92 93 MM ee ss ss aa gg ee Voice Mail Using this menu, you can access your voice mail box and listen to your voice messages. Accessing this menu plays back the latest voice mail message. While listening to a voice mail, you can use following options. Press... To... Make a call to the sender Display next message Display previous message Erase the current message Message Using the Message menu, you can read your text message and listen to the voice mail message. Note: You can quickly access this menu by pressing in Standby mode. RX Message Menu 6.1 Your phone receives voice mail and text messages. When the phone receives a message, an alert sounds, and a text notification displays with the message icon until you read the text messages or until you listen to the voice mail notification messages. The icon remains on the screen You phone can receive incoming messages in both Standby mode and Talk mode. The messages are received even when the phone is locked. If this happens, the time and date of the message displays, but you can access the message. To review the message, you must unlock the phone. Your phone can store up to 25 messages, depending on the length of the messages. If the message memory is full, an error message is displayed and you cannot receive any new message until you erase the stored messages. 94 95 MM ee ss ss aa gg ee Text An indexed list of text messages in the numeric order displays. An exclamation point next to an entry indicates an urgent message. A check mark next to an entry indicates that you have read and stored the message. Select the desired message to review using , then press . While reading a message, you can use following options. To... Press... Make a call to the sender Display next message Display previous message Send a reply message to the sender Erase the current message Erase All You can erase all voice mail or all text messages you have received. When a confirming message displays after selecting the desired kind of the messages, highlight Yes (or No not to erase) using , then press to confirm your selection. 96 MM ee ss ss aa gg ee Alert When your receive a new message in Standby mode, the phone alerts you. You can set how frequently this happens and which alert type sounds. If you are on a call and receive a message, the phone automatically mutes the ringer and provides the call waiting tone (this is to avoid ringing in your ear while you are trying to talk). Interval: Set how often your phone alerts you that there are new received messages between Every 2 Min and Once. Selecting OFF does not sound the message alert. Sound Type: Set the alert type for the message alert between Bell 1and Bell 2. Selecting OFF does not sound the message alert. Selecting Vibrator vibrates the phone when a new message comes in. Display You can set the phone to display the contents of a new text message in Standby mode when it comes in. Select Set to display the content of the message. Otherwise, select Cancel. 97 Display The Display menu enables you to:
Change the greetings Set the back ground image or text Select date format to be displayed in Standby mode Set the backlight and the service light Select the display language Greetings Menu 7.1 This option allows you to change a greeting message to be displayed under the background image in Standby mode. The current message is displayed. The default greetings is SAMSUNG. 1. Remove the old greetings by pressing repeatedly. 2. Enter a new message, and press . You can enter up to 14 characters for English and 8 characters for Chinese. For further details on entering text, see page 34. Background DDiissppllaayy Menu 7.2 You can set the various images or text for the background of the display. Power On/Off Your phone displays an image briefly when it is switched on or off. This setting is just for fun and grins. You have a few animations to select from for these power on and off images. The following options are available:
Power On: You can select an image to be displayed when you switch the phone on. The power-on animation can be Rose or Orange Logo. Power Off: You can select an image to be displayed when you switch the phone off. The power-off animation can be Rose or Orange Logo. 98 99 DDiissppllaayy Wall Paper Your phone displays an image in Standby mode. You have a few images to select from for wall paper. The wall paper image can be Orange Logo, SAMSUNG Logo, Olympic Logo, or Digital Clock. And you can download three images using the PC Link program or WAP service. Selecting No Logo displays no image. If you select Digital Clock, you are provided with the following options:
Normal: displays the normal digital clock. Note: While you press and hold in Standby mode, you can see this clock. World Clock: displays the time in the selected area with the time in your area. Press to select a city or country from the world map, then press . DDiissppllaayy Screen Saver Using screen saver displays a constantly shifting pattern on a display screen, used to prevent damage to the screen through continuous display of the same image. The following options are available. LCD: allows you to select the image to be displayed when the Screen Saver feature is turned on. The phone comes with three images set at factory. And you can download up to three images using the PC Link program or WAP service. On/Off: allows you to turn the Screen Saver feature on or off. Select Set to use the Screen Saver feature. The phone displays the selected image after a specified duration without keypress. Pressing any key restores the screen. Or, select Cancel not to use it. Set Wait Time: allows you to specify the time length the phone waits before using the Screen Saver feature. Select Short or Long. 100 101 DDiissppllaayy Text Slide You can display the sliding text in Standby. The following options are available. Enter Text: allows you to write and save text to be slided on top line of text and graphic area in the display. You can enter up to 14 characters for English and 8 characters for Chinese. For details on entering text, see page 34. Set On/Off: allows you to turn this feature on or off. Date Menu 7.3 The current date and time appears on the bottom line of f the display in Standby mode. You can set the format in which the date and time is displayed. The examples of the four format using the current date and time are listed. Select the desired one from the list. Back/SVC Light DDiissppllaayy Menu 7.4 Backlight You can select whether or not the phone uses the backlight. A marginal increase in standby/talk time can be achieved by turning the backlight off or setting the saving backlight. The following options are available. Interval: allows you to set the length of time the phone waits until the backlight lights after you press a last key. Select 8 sec or 20 sec. Selecting Off does not use the backlight. Set Backlight: allows you to set the backlight type between Normal and Saving. Select Saving uses the backlight only from 5:00 PM to 8:00 AM. Doing this saves the power of the battery. LCD Control This option allows you to adjust the contrast of the external LCD on the cover and main LCD. Enter the value using the numeric keys or press or (or, or on the left side of the phone) repeatedly to increase or decrease the value. 102 103 DDiissppllaayy SVC LED This option allows you to select whether or not the service light in the top left-hand corner of the phone is used. The following options are available. Set: the service light flashes when the phone is ready for use. Cancel: the service light is not used except when you switch the phone on. Language Menu 7.5 You can select a display language. Select the desired language between English and Chinese. Sounds The Sounds menu enables you to:
Set the ring type and tone Adjust the ring volume Set the alert tone to sound when you are connected to or disconnected from the system. Set the length of the DTMF tone. Ring Type Menu 8.1 This option allows you to indicate how you are to be informed of any incoming calls. The following options are available. Bell: The phone rings using the ring tone selected via the Ring Tone menu option (8-2). Vibrator: The phone vibrates but does not ring. Lamp: The backlight is switched on and the service light blinks; the phone neither rings nor vibrates. Vib + Bell: The phone vibrates and rings. Bell + Vib: The phone rings and vibrates. Bell ++: The phone rings using the ring tone, but the ring volume increase from the lowest. Bell --: The phone rings using the ring tone, but the ring volume decrease from the loudest. 104 105 SSoouunnddss Ring Tone Menu 8-2 Connect Tone SSoouunnddss Menu 8-4 This option allows you to select the required ringing tone. Each time you select a tone, it sounds for a few seconds. The following options are available:
Bell: you can choose among 5 different bell tones. Melody: you can choose among 15 different melodies. CDMA Melody: you can download your favorite melodies using the SMS service For details, contact your service provider. My Melody: you can download your favorite melodies using the WAP service or the PC Link program. You can download up to 3 melodies. Ring Volume Menu 8-3 This option allows you to adjust the ringing volume to one of eight levels. Press (or, phone) to adjust the volume. The more the bars, the louder the volume. or on the left side of the With this menu option set, the phone sounds the connect tone when your call is connected to the system. Release Tone Menu 8-5 With this menu option set, the phone sounds the Release tone when a call is disconnected or dropped from the system. DTMF Tone Menu 8-6 The tone length setting enables you to select short or long DTMF (dual-tone multi-frequency) tones. DTMF tones are what is send by your phone to access teleservices (such as a bank account). The system used by the bank or other service determines if you need short or long DTMF. If the service is digital (which most are these days), short DTMF will almost always works. However, some new systems and almost all older (analog) system require you to use long DTMF tones. 106 107 SSeettuupp Receiving Call: restricts all incoming calls. Int. Call: restricts all overseas calls. Incoming Num.: sets the phone shows or block the callers number when a call comes in, if available. Select Show to display the callers number, or Block not to display it. NAM Phone Number Menu 9-2 Your Samsung phone can store four NAMs (NAM stands for Numerical Assignment Module -
essentially your telephone number). This means you can have four phone numbers on your phone, and you can quickly and easily switch your service back and forth among the numbers. Using this menu, you can select the desired NAM phone number Select desired one of the numbers. The phone will reboot and acquire service using the new NAM setting. Setup Many different features of your phone can be customized to suit your preferences. You can:
Restrict the unauthorized use. Check your NAM phone numbers. Set the phone to send PIN to prevent the unauthorized use Reset your phone setting and clear the memory. Lock your phone To access the Setup menu, you are required to enter your four-digit lock code. It is preset to 0000. Restrict Menu 9.1 This feature provide you with the various option to restrict the unauthorized use. You can:
The following options are available. Lock Code: allows you to change your lock code. Enter a new lock code and press . Re-enter the lock code to confirm it and press . Private Life: protects your private information. If you set this options, the lock code is required to access your personal information, such as the phone book, scheduler, to do list, call logs and so on. Memory: restricts viewing all numbers in the Phone Book and making a call using them. 108 109 SSeettuupp Send PIN Menu 9-3 Auto Lock SSeettuupp Menu 9-
This menu allows you to lock the phone. Locking the phone limits all use of your phone. Selecting Set immediately locks your phone and stays locked until you cancel Auto Lock mode. To use the phone in Lock mode:
Enter the four digits lock code. Your phone unlocks temporarily and you can use it. If you switch the phone off and back on, it locks again. To cancel Auto Lock mode and unlock the phone:
Enter the four digits lock code in Lock mode. Access the Auto Lock menu, and select Cancel to unlock your phone. Note: Your service provider must enable this feature and assign you a PIN in order for this feature to work. This feature prevents your phone from being used by unauthorized persons. The feature is only available if your system supplier provides this service and you have a PIN (Personal Identification Number) assigned by the system supplier. Contact your service provider for complete information on this feature. Your PIN is programmable and can be up to 24 digits. Select Set to activate this feature, and you are asked to send PIN when you make a call. Select Cancel to deactivate this feature. For information about this service in detail, contact your service provider. Vocoder Menu 9-4 This phone is set to EVRC FORCED for the best quality of your call. If you use this phone abroad, please refer to the network service provider for further details. 110 111 SSeettuupp Initialize Menu 9-
You can initialize your phone to its factory default status. Clear All This menu allows you to erase all data you have stored in the phones memory, such as phonebook entries, tasks, schedules, call logs and so on. When a confirmation displays explaining that you will clear all data in the phone memory, select Yes to confirm. The phone reboots (turns itself off then on), then returns to Standby mode. Or, select No to cancel your selection and exit this menu. Reset Phone Resetting the phone returns to all user-selectable options to the default settings. When a confirmation displays explaining that you will clear all data in the phone memory, select Yes to confirm. The phone reboots (turns itself off then on), then returns to Standby mode. Or, select No to cancel your selection and exit this menu. Reference Information Accessories Batteries Two types of Li-ion batteries are available for use with your phone:
STANDARD Battery EXTENDED Battery Desktop Charger Desktop charger allows you to recharge your battery with the phone and also an extra battery simultaneously. Cigarette Lighter Adapter The Cigarette Lighter Adapter charges your phone in a vehicle while you drive and enables you to operate the phone from a vehicle cigarette lighter socket. Hands-Free Car Kit The Hands-Free Car Kit provides safety, freedom and convenience in your vehicle. (Kit includes Cradle and Microphone.) Ear-Microphone The Ear-Microphone includes both the earpiece and microphone in a convenient, lightweight unit. RS-232C Cable The RS-232C Cable connects your SCH-A301 to your computer port, allowing you to use Internet or other communication programs. 112 113 RReeffeerreennccee IInnffoorrmmaattiioonn Using the Batteries Your phone is powered by a rechargeable Li-ion standard battery. Additional batteries are also available (ask your SAMSUNG dealer for further details):
Precautions When Using Batteries Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby times are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging times depend on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. RReeffeerreennccee IInnffoorrmmaattiioonn Use only Samsung-approved batteries and recharge your battery only with Samsung-
approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first. Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and life-time of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 C
(32 F). Do not short-circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuit. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. 114 115 RReeffeerreennccee IInnffoorrmmaattiioonn Safety Information Road Safety Remember, road safety always comes first!
Do not use a hand-held phone while driving a vehicle. Always park the vehicle before having a conversation. Make sure that the phone is stored safely and will not fall or be broken in the event of a collision or emergency stop. The use of an alert device to operate a vehicles lights or horn on public roads is not permitted. Only qualified personnel should install or service the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the unit. Electronic fuel injection, anti-skid braking, electronic cruise control or any other electronic systems may malfunction due to the lack of protection from radio signals. Check regularly that all cellular phone equipment in your vehicle is mounted and operating correctly. RReeffeerreennccee IInnffoorrmmaattiioonn Operating Environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). Operation of any radio transmitting equipment, including cellular phones, may interfere with inadequately protected medical devices. Consult a physician or the manufacturer of the medical device if you have any questions. Other electronic equipment may also be subject to interference. As with other mobile radio transmitting equipment, you are advised that for satisfactory operations and personal safety, the equipment should only be used in the normal operating position. Always switch off the phone when at a refuelling point (service station). You are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. 116 117 RReeffeerreennccee IInnffoorrmmaattiioonn RReeffeerreennccee IInnffoorrmmaattiioonn Do not store the phone in cold areas. When the phone warms up (to its normal temperature), moisture can form inside the phone, which may damage the electronic circuits. Do not attempt to open the phone. Non-expert handling of the phone may damage it. Do not drop or knock the phone. Rough handling may damage the internal circuits. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in mild, soapy water. If the phone or any of its accessories are not working properly, take them to your nearest qualified service centre. The personnel there will assist you, and if necessary, arrange for the phone to be repaired. Switch off your cellular phone when in an aircraft. The use of cellular phones in an aircraft is illegal and may be dangerous to the operation of the aircraft or disrupt the cellular network. Failure to observe these instructions may lead to the suspension or denial of cellular telephone services to the offender, legal action or both. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill the warranty obligations and enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of children. Keep the phone dry. Precipitation, humidity and liquids containing minerals will corrode the electronic circuits. Do not use or store the phone in dusty, dirty areas as its components may be damaged. Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. 118 119 RReeffeerreennccee IInnffoorrmmaattiioonn Emergency Calls Important! This phone, like any cellular phone, uses radio signals, cellular and landline networks, as well as user-programmed functions that cannot guarantee connection in all conditions. Therefore, you should never rely solely on any cellular phone for essential communications (medical emergencies for example). Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with local cellular service providers. Glossary Airtime - Actual time spent talking on the wireless phone. Most carriers bill customers based on how many minutes of airtime they use each month. Antenna - A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas. Base Station - The fixed radio transmitter/receiver that maintains communications with mobile radio telephones within a given area. (Typically seen as cell or cell site) CDMA - (Code Division Multiple Access) A spread-
spectrum approach to digital transmission. With CDMA, each conversion is digitized and then tagged with a code. The mobile phone deciphers only a particular code to pick the right conversation off the air. The transmitted signal is just above noise level across the available bandwidth. Channel - Communications signals transmit along paths called channels. Codec - Compression & Decompression. Call Waiting - Ability to inform users that they have an incoming call when engaged on another call. 120 121 GGlloossssaarryy GGlloossssaarryy Line Identification - Services allowing subscribers Services (Caller ID to view or block the telephone Display) numbers of callers. Frequency - A measure based on time, as one or more waves per second, in an electrical or light wave information signal. A signals frequency is stated in cycles-
per-second or Hertz (Hz). Hands-Free - A feature that permits a driver to use a wireless phone without lifting or holding the handset - an important safety feature for automobiles, tractors and most other motorized vehicles. LCD - (Liquid Crystal Display) Commonly used to refer to the screen display on the wireless phone. LED - (Light Emitting Diode) Commonly used to refer to a small light on the wireless phone or on the Desktop Charger. The LED lights on the phone to indicate an incoming call. The lights on the charger to indicate that battery charging is taking place. Prepend - The addition of a prefix, such as an area code, to a phone number. RF - Radio Frequency Roaming - The ability to use a wireless phone to make and receive calls in places outside of the home service area. Service Charge - The amount paid each month to receive wireless service. Standby Time - The amount of time a fully charged wireless portable or transportable phone can be on and idle without being in use. (See Talk Time) Talk Time - The length of time a person can talk on a portable or transportable wireless phone without recharging the battery. Vocoder - Voice Coder. A device used to convert speech into digital signals. Voicemail - A computerized answering service that answers a call, plays a greeting and records a message. Depending on the sophistication of the service, it can notify the subscriber, via a pager, of an incoming call or message. (Also called voice messaging) Wireless - Radio-based Systems that allow transmission of telephone or data signals through the air without a physical connection, such as a metal wire
(copper) or fiber optic cable. 122 123 n u m b e r R e d a i l l a s t S E N D t w i c e c a l l s a n d i d a l S c a n t h e l a s t
S E N D E r a s i n g a s p e c i f i c e n t r y S E N D
N a v i g a t i o n
S c a n m e m o r i e s l v o u m e j A d u s t r i n g l v o u m e j A d u s t s p e a k e r
i n S t a n d b y m o d e
r e p e a t e d l y
r e p e a t e d l y
i n T a l k m o d e
) R e c e i v e a c a l l S E N D o r O p e n t h e p h o n e S p e e d d i a l M a k e a c a l l P h o n e n u m b e r
S E N D i n t o m e m o r y S t o r e n u m b e r s O K O K
M E N U
S e l e c t D e l N a v i g a t i o n
N a v i g a t i o n
O K N a v i g a t i o n
N a v i g a t i o n
t h e n h o l d d o w n t h e t h i r d t h e f i r s t a n d t h e s e c o n d
. i d g i t
, T h r e e
T o u c h
1 0 0
1 9 9
P r e s s d o w n t h e t h i r d d i g i t
. t h e s e c o n d d i g i t
, t h e n h o d T w o
T o u c h
0 1 0
0 9 9
P r e s s l d o w n t h e t h i r d d i g i t
. O n e T o u c h
0 0 1
0 0 9
H o d l
S e l e c t l a b e l
O K P h o n e n u m b e r
M E N U
S e l e c t P h o n e b o o k
O K
E n t e r l o c a t i o n
N a v i g a t i o n E n t e r N a m e
N a v i g a t i o n
I B A S C O P E R A T I O N I N T E R N A L P H O N E B O O K S C H
A 3 0 1 Q u c k i R e f e r e n c e C a r d 124 125 d n u o r g k c a B s g n i t e e r G e t a D t h g i L C V S
k c a B e g a u g n a L
1 2 3 4 5 l e m u o V g n R i e n o T e n o T t c e n n o C e s a e e R l e n o T F M T D e p y T e n o T g n R i g n R i
1 2 3 4 5 6
e n o h P M A N t c i r t s e R N P I d n e S r e d o c o V k c o L o t u A e z i l a i t i n I
1 2 3 4
l y a p s i D
7 s d n u o S
8 p u t e S
9 e g a s s e M x R
1 s e g a s s e M
6 n o g n i d n e p e d y r a v y a m s t n e t n o c e h T
. k r o w t e n e h t r e b m u N e t e l e D e d o M e m i T r i A r e w s n A
3
4
5 g n i o g t u O
1 g n i m o c n I
2 r e b m u N d n i F
1 y r t n E d d A
2 p u o r G t i d E
3
e n o h P y M
r e l u d e h c S
1 t s i L o D o T
2 r o t a l u c l a C e m i T t e S m r a l A e m i T d l r o W y a D D
3
4
5
6
7 u n e M e g n a r O
2 s l l a C
3 k o o B e n o h P
4 M I P
5 Licensed by QUALCOMM Incorporated under one or more of the following Patents. U.S Patent No. 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 n o i t c n u F y d a L
e m a G
8 9 E E R T U N E M
) U N E M s s e r p
, s s e c c a o T
u n e M n i a M M P I
5 g n i t t e S m e d o M e c i v r e S P A W
1
e c i v r e S P A W
1 126
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-07-13 | 824.7 ~ 848.31 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2001-07-13
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
SCHA301
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** C******
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R****** O******
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia
|
|||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R****** O********
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia
|
|||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single-Mode Cellular Phone (CDMA) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power is ERP. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device, including its antenna whether extended or retracted, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Head: 1.476 W/kg; Body-worn: 0.755 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22.901(d) | 824.70000000 | 848.31000000 | 0.2710000 | 2.5000000000 ppm | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC