all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.84 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 1.84 MiB |
* Some of the contents in this manual may differ from your phone, depending on the software installed or your service provider. PORTABLE CELLULAR TELEPHONE SCH-X601 Users Manual ELECTRONICS World Wide Web www.samsungmobile.com Printed in China Code No. : GH68-04402A English. 10/2003. Rev.1.0 FCC RF EXPOSURE INFORMATION Table of Contents In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied antenna or one that is approved. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in a violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain at least a 0.59 inch (1.5 cm.) separation distance, between the user's body and the back of the phone, including the antenna, whether extended or retracted. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Vehicle Mounted External Antenna (optional, if available.) A minimum separation distance of 7.9 inches (20cm) must be maintained between a person and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, please visit the FCC web site at www IMPORTANT SAFETY PRECAUTIONS ....................................... 7 UNPACKING ............................................................................... 9 YOUR PHONE ......................................................................... 10 Phones Parts .............................................................................. 10 Display ....................................................................................... 13 Backlight .................................................................................... 15 Service Light ............................................................................... 15 GETTING STARTED .................................................................. 16 Using a UIM Card ......................................................................... 16 Using a Battery ........................................................................... 17 Switching the Phone On or Off .................................................... 21 PIN Code .................................................................................... 22 Using the Soft Key ...................................................................... 23 Your Phones Modes ..................................................................... 24 CALL FUNCTIONS ................................................................... 27 Making a Call .............................................................................. 27 Ending a Call ................................................................................ 28 Emergency Dialing ........................................................................ 28 Using the Recent Call Logs ............................................................ 29 Making a Call from the Phonebook ............................................... 30 Prepend Dialing ............................................................................ 30 Speed Dialing ............................................................................... 31 Pause Dialing ............................................................................... 33 Adjusting the Volume During a Call ................................................ 35 Answering a Call ........................................................................... 36 Silencing an Incoming Call ............................................................ 36 Rejecting a Call ............................................................................. 37 Viewing Missed Calls ..................................................................... 37 Options During a Call .................................................................... 38 Call Waiting .................................................................................. 39 Call Forwarding ............................................................................ 39 Three-Way Calling ........................................................................ 40 3 ENTERING TEXT ...................................................................... 41 Changing the Text Input Mode ..................................................... 42 Using the Chinese Pinyin Mode .................................................... 43 Using the Chinese Stroke Mode .................................................... 48 Using the T9 Word Mode ............................................................. 51 Using the ABC Mode .................................................................... 53 Using the Symbol/Symbol2 Mode ................................................ 55 Using the 123 Mode .................................................................... 55 USING THE MENUS......................................................... 56 Accessing a Menu Function by Scrolling ........................................ 56 Accessing a Menu Function by Using its Shortcut ........................... 57 List of Menu Functions ................................................................. 58 CALLS ........................................................................... 62 Missed (Menu 1-1) ................................................................... 62 Incoming (Menu 1-2) ............................................................... 63 Outgoing (Menu 1-3) ............................................................... 64 Erase Logs (Menu 1-4) .............................................................. 64 Air Time (Menu 1-5).................................................................. 65 Call Forward (Menu 1-6)........................................................... 66 Call Waiting (Menu 1-7) ............................................................ 67 PHONEBOOK ................................................................ 68 Find (Menu 2-1) ...................................................................... 68 Add (Menu 2-2) ....................................................................... 71 Group Set (Menu 2-3) .............................................................. 76
.......................................................... 77 My Phone # (Menu 2-4) MESSAGE ..................................................................... 78 New Message (Menu 3-1).......................................................... 78 Inbox (Menu 3-2)...................................................................... 80 Outbox (Menu 3-3) ................................................................... 82 Erase Messages (Menu 3-4)....................................................... 83 Message Setup (Menu 3-5)........................................................ 83 Web Alert (Menu 3-6)................................................................ 85 SCHEDULER .................................................................. 86 View Month (Menu 4-1) ........................................................... 86 Jump To Date (Menu 4-2) ........................................................ 88 Alarm Set (Menu 4-3) ............................................................. 89 Calculator (Menu 4-4) .............................................................. 90 Today (Menu 4-5) .................................................................... 91 To Do List (Menu 4-6) .............................................................. 91 Memo Pad (Menu 4-7) ............................................................ 92 Countdown (Menu 4-8) ............................................................ 93 World Time (Menu 4-9) ............................................................ 95 ENTERTAINMENT ........................................................... 96 Music Box (Menu 5-1) .............................................................. 96 Image Box (Menu 5-2) ............................................................. 98 Games (Menu 5-3) ................................................................... 99 Fun Box (Menu 5-4) ............................................................... 102 Memory Status (Menu 5-5)..................................................... 103 SETTINGS ................................................................... 104 Sounds (Menu 6-1) ................................................................ 104 Ringer Volume (Menu 6-1-1) .............................................. 104 Key Tone (Menu 6-1-2) ...................................................... 105 Alerts (Menu 6-1-3) ........................................................... 106 Voice Volume (Menu 6-1-4) ................................................ 107 Power On/Off (Menu 6-1-5) ............................................... 107 Display (Menu 6-2) ................................................................ 108 Banner (Menu 6-2-1) ......................................................... 108 Backlight (Menu 6-2-2) ...................................................... 109 Language (Menu 6-2-3) ..................................................... 109 Set Time (Menu 6-2-4) ....................................................... 110 Service LED (Menu 6-2-5) ................................................... 111 Contrast (Menu 6-2-6) ........................................................ 111 4 5 SETTINGS (continued) Auto Retry (Menu 6-3) .......................................................... 111 Auto Answer (Menu 6-4) ....................................................... 112 Answer Mode (Menu 6-5) ...................................................... 112 Roam Option (Menu 6-6) ....................................................... 113 Security (Menu 6-7) .............................................................. 114 Lock Mode (Menu 6-7-1) .................................................... 114 Change Lock (Menu 6-7-2) ................................................. 115 Emergency # (Menu 6-7-3) ................................................ 115 Voice Privacy (Menu 6-7-4) ................................................ 116 Restriction (Menu 6-7-5) .................................................... 117 Clear Memory (Menu 6-7-6) ............................................... 117 Reset Phone (Menu 6-7-7) .................................................. 118 Card Setup (Menu 6-7-8) .................................................... 118 Entry Method (Menu 6-8) ...................................................... 119 Data Option (Menu 6-9) ........................................................ 120 U-MAX ....................................................................... 121 U-Info (Menu 7-1) ................................................................. 121 U-Magic (Menu 7-2) .............................................................. 122 UNI-Info (Menu 7-3) ............................................................. 122 HEALTH AND SAFETY INFORMATION ............................. 123 GLOSSARY .................................................................. 136 QUICK REFERENCE CARD ............................................. 139 Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refuelling Do not use the phone at a refuelling point (service station) or near fuels or chemicals. Switching Off in Aircraft Wireless phones can cause interference. Using them in aircraft is both illegal and dangerous. Switching Off in Hospitals Switch off your phone near medical equipment. Follow any regulations or rules in force. Interference All wireless phones may be subject to interference, which could affect their performance. Special Regulations Meet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger (in a hospital for example). 6 7 IImmppoorrttaanntt SSaaffeettyy PPrreeccaauuttiioonnss Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Emergency Call Ensure the phone is switched on and in service. Key in the emergency number for your present location, then press . If certain feature are in use, deactivate those features before you can make an emergency call. Give all the necessary information as accurately as possible. Do not cut off the call until given permission to do so. Water Resistance Your phone is not water-resistance. Keep it dry. Accessories and Batteries Use only Samsung-approved accessories and batteries. Use of any unauthorised accessaries could damage your phone and may be dangerous. Qualified Service Only qualified service personnel may install or repair your phone. For more detailed safety information, see Health and Safety Information on page 123. Unpacking Your package contains the following items. Phone Travel Adapter Batteries Wearable Ear-microphone Finger Strap Users Manual 8 9 Your Phone Phones Parts The following illustration shows the main elements of your phone. With the phone open Folder Earpiece Display With the phone closed Ear-microphone jack YYoouurr PPhhoonnee Antenna Service light Keys Key Functions
(Soft keys) Perform the functions indicated by the text above them, on the bottom line of the display. In the menu mode, scrolls through the menu options. In the standby mode, the key enters the Games menu. The Message, and held, the key enters the View month(scheduler) screen. key enters the Enters the U-MAX menu. Volume keys During a call, adjust the voice volume. In the standby mode, adjusts the call ringer volume. 10 Microphone 11 YYoouurr PPhhoonnee YYoouurr PPhhoonnee Keys (continued...) Key Functions (continued...) Makes or answers a call. In the standby mode, recalls the last number dialed, received or missed. Ends a call. Also switches the phone on and off when pressed and held. In the menu mode, cancels your input and returns to the standby mode. Deletes characters from the display. In the menu mode, returns to the previous menu level.
Enters numbers, letters and some special characters. In the standby mode, allows you to change the call ringer when pressed and held. In the text entry mode, changes the case of letters. In the standby mode, quickly enters or exits the silent mode when pressed and held. In the text entry mode, inserts a space. Display The display has three areas; The first line for icons, the middle lines for text and graphic area, and the last line for the soft key indications. Icons Text and graphic area Menu Find Soft key indications Icons Signal Strength : Shows the received signal strength. The greater the number of bars, the better the signal. Service: Appears when a call is in progress. No Service: Appears when you are outside a service area. When it displays, you cannot make or receive calls. Wait a little while for a better signal or move into an open area to regain service. Roaming: Appears when you are out of your home area and have logged onto a different network; for example, when travelling in other countries. 12 13 YYoouurr PPhhoonnee Icons (continued...) New Message: Indicates that there is a new message waiting to be checked. Alarm Mode: Appears when you set an alarm to ring at a specified time. Lock Mode: Appears when your phone is locked. Vibration Mode: Appears when the ringer volume for calls is set to Vibrate or when your phone is in silent mode. Ringer Silent : Appears when the ring volume for calls is set to Silent. Battery Status: Shows the level of your battery. The more bars you see, the more power you have left. YYoouurr PPhhoonnee Backlight The backlight illuminates the display and keypad. When you press any key or open the folder, the backlight illuminates. It turns off if no key is pressed within a given period of time, depending on the Backlight option (Menu 6-2-2) set in the Display menu. To specify the length of time the phone waits before the backlight turns off, set the Backlight menu option (Menu 6-2-2); see page 109 for further details. Service Light The service light on the folder flashes to indicate an incoming call, message or alarm and flashes for a few seconds when you turn the phone on or off. It lights up while the battery is charging with the travel charger; the color of the light turns green when the battery is fully charged. Service light 14 15 Getting Started Using a UIM Card The UIM(User Identification Module) card contains a chip with all the information required to operate your phone. Note the following:
Keep all miniature UIM cards out of the reach of small children. The UIM card and its contacts can easily be damaged by scratching or bending, so be careful when handling, inserting or removing the card. Installing the UIM card 1. If necessary, remove the battery by referring to page 18. 2. Slide the UIM card into the slot ensuring that the notched corner is at the top left and the gold contacts of the card face into the phone. GGeettttiinngg SSttaarrtteedd Removing the UIM Card Slide the UIM card out of the slot. Note: Despite of no UIM card in the phone, you can make emergency call. Using a Battery Your phone is powered by a rechargeable Li-ion battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 155 minutes for a standard battery. Installing the Battery 1. Insert the teeth at the bottom of the battery into the corresponding slots. 16 17 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd 2. Push the battery against the back of the phone until it clicks into place. Make sure that the battery is properly installed before switching the phone on . Removing the Battery 1. If necessary, switch off the phone by pressing and holding the animation is displayed. key down until the power-off 2. To remove the battery, push and hold the catch above the battery on the back of the phone and lift the battery away. Charging the Battery A travel adapter and a battery charger are provided for charging your batteries. Using the Travel Adapter The travel adapter allows you to use the phone while the battery is charging, but this will cause the battery to charge more slowly. 1. With the battery in position on the phone, plug the connector of the travel adapter into the jack at the bottom of the phone. Make sure that the arrow on the connector is facing toward the front of the phone. 2. Plug the adapter into a standard AC wall outlet. The battery strength icon on the display shows that the battery is charging. 18 19 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd 3. When charging is finished, unplug the adapter from both the power outlet and the phone by pressing the grey tabs on both sides of the connector and pulling the connector out. Note: Do not remove the battery from the phone without unplugging the adapter while it is charging. If you do this, the phone may be damaged. Switching the Phone On or Off 1. Open the folder. 2. Press and hold for more than one second to switch the phone on. 3. If the phone asks for a Personal Identification Number (PIN), enter the PIN code supplied with the UIM card. For further details on the PIN code, see page 22. The service light flashes and an alert sounds. When the system locates services, you can see the idle screens on the display. If the phone is out of the service area, the No Service icon (
) appears on the display. In this case, you cannot place and receive calls. You can try again later when service is available. Note: You can change the display language via the Language menu option (Menu 6-2-3). See page 109. 4. When you wish to switch the phone off, press and hold for more than one seconds until the power-off animation is displayed. 20 21 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd WARNING!
Do not switch on the phone when mobile phone use is prohibited or when it may cause interference or danger. Note: Do not touch the antenna on the phone unnecessarily when the phone is switched on. Contact with the antenna affects the call quality and may cause the phone to operate at a higher power level than otherwise needed. PIN Code The PIN code supplied with the UIM card helps you protect the UIM card against unauthorized use. When the phone asks you to enter the code, enter the appropriate code (displayed as asterisks for security). If you enter an incorrect PIN code three times in succession, your UIM card is blocked. To unblock the card, contact your service provider. You can enable or disable the code using the Card Setup menu option (Menu 6-7-8). For further information on the PIN code, see page 118. Using the Soft Keys Your phone offers a set of functions that allows you to customise your phone. These functions are arranged in menus and submenus, accessed using the two soft keys marked and . Each menu and submenu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the current context; the label on the bottom line of the display just above each key indicates its current role. Example:
09/05 Fri 11:18 Menu Find Press the left soft key to access Main Menu Mode. Press the right soft key to access Phonebook Find. 22 23 GGeettttiinngg SSttaarrtteedd GGeettttiinngg SSttaarrtteedd Your Phones Modes Standby Mode Standby mode is the most basic state of your phone. The phone goes into the standby mode soon after you turn it on, or whenever you briefly press . When your phone is in the standby mode, you will typically see the current date and time. If you enter a phone number, you can press to dial it, or press the Save soft key to save it in the internal phonebook. Press Be careful; if you are on a call when you press , your phone disconnects the call and returns to the standby mode. Press several times or hold it to return to the standby mode without ending the call. at any time to return to the standby mode. Talk Mode You can place and answer calls only when your phone is turned on. During a call, the phone is in the talk mode. While you are in the talk mode, pressing the Menu soft key gives you a list of options. See page 38 for details on the options. Power Save Mode Your phone comes with a Power Save feature that will automatically be activated if your phone is unable to find a signal after 15 minutes of searching. While this feature is active, the phones battery charge is conserved. To return to the standby mode, press any key. Lock Mode When you lock your phone using the Lock Mode menu option (Menu 6-7-1), you can receive messages and calls, but you cannot place a call until you unlock the phone. To unlock the phone, press the Unlock soft key and enter the lock code. For further details about locking and unlocking the phone, see page 114. 24 25 GGeettttiinngg SSttaarrtteedd Silent Mode The silent mode disables all sounds on the phone. This feature is best used in situations where the phone might disturb others, such as in a meeting, at a library and in a theater. To enter the silent mode, press and hold until Entering Silent Mode and the Vibration icon (
appears.
) To exit the silent mode and reactive th previous sound settings, press and hold until Exit Silent Modeappears. The vibration icon is no longer displayed. Note: When you turn the phone off, the silent mode is automatically deactivated. Call Functions Making a Call To make a call:
1. In the standby mode, enter the area code and phone number. While entering a phone number, press the Pause soft key to insert a hard pause. For more information on pause dialing, see page 33. 2. Press . The phone places the call to the entered phone number. Note: If you have set the time interval for automatic redialing in the Auto Retry menu option (Menu 6-3), the phone automatically retries to make the call when no one answers or the line is busy. See page 111 for further details. Correcting the Number To clear the last digit displayed Press
. the whole display and hold one second. for more than 26 27 CCaallll FFuunnccttiioonnss Ending a Call When you want to finish your call, press . The call time, or the length of the call, displays along with the phone number of the called person. If the number is stored in your phonebook, the name displays. If there is no match, you can press the Save soft key and store the number in the phonebook. For further details about storing the number in the phonebook, see page 71. Or, simply close the folder to end a call. Emergency Dialing You can place calls to standard emergency numbers, such as 119, or three specified number in the Emergency Number list, even if your phone is locked or all outgoing calls are restricted. For further details on emergency numbers, refer to page 115. You can place an SOS call to a preset emergency number when switching the phone on without a UIM card. CCaallll FFuunnccttiioonnss Using the Recent Call Logs The phone stores up to 60 of the calls dialed, received or missed chronologically. The last call is saved in the first position. To recall any of these numbers:. 1. If there are any characters on the display, return to the standby mode by pressing . 2. Press . The list of recent calls displays.
: Outgoing calls
: Incoming calls
: Missed calls 3. Press or , or the volume keys on the left side of the phone to scan through the list until you find the required number. 4. Press to dial the displayed number. 28 29 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Making a Call from the Phonebook Speed Dialing You can store the phone numbers called regularly in the UIM card and phone memory, which is called Phonebook. You then simply recall the number to dial. For further details on the phonebook, refer to page 68. Prepend Dialing The Prepend option lets you add digits, such as area codes and network feature activation codes, to a phone number that is in your call logs before dialing it. To prepend the phone numbers stored in the call logs:
1. Access a call log in the Recent Calls list or in the Calls menu (Menu 1) referring to page 62 . 2. When the phone number you want to dial displays, press the Menu soft key to access the Menu pop-
up list. 3. Press to select the Prepend option. 4. Enter the area code or feature code. 5. Press to dial the number. Once you have stored phone numbers in the phonebook, you can dial them easily with the few presses of the keys. From the UIM Card Memory You can dial the phone numbers stored in the UIM card memory. The capacity of the card memory may vary depending on the card. Enter the memory location of the desired number and press and hold the final digit to dial. One-Touch Dial: Memory locations 001 through 009 are special one-touch locations. You can dial the phone numbers stored in the Phonebook memory from 001 through 009 simply by pressing one key. Press and hold the third digit of the memory location containing the number to be dialed. For example: Location no. 009 Press and hold. The number (and name) stored is displayed, then dialed. 30 31 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Two-Touch Dial: For memory locations of two digits. Press the second digit briefly, then hold down the third digit of the memory cell. For example: Location no. 023 Press briefly and hold down . The number (and name) stored is displayed, then dialed. Three-Touch Dial: For memory locations of two digits. Press the first and the second digit briefly, then hold down the third digit of the memory cell. For example: Location no. 123 Press and briefly, then hold down . The number (and name) stored is displayed, then dialed. From the Phones Memory Press the digits of the phone memory location containing the number to be dialed, then press and hold . For example: Location no. 029 Press and briefly, then hold down . The number (and name) stored is displayed, then dialed. 32 Pause Dialing When you call automated system, like banking services, you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Phonebook, separated by special characters, which are called pauses. Storing Pauses in a Phonebook Entry To store a number in your Phonebook that contains pauses:
1. Enter the phone number you want to store, such as the banks teleservice phone number. 2. Press the Pause soft key to insert a pause. A P displays, meaning that a hard pause will occur at that point in the dialing sequence. The Pstops the dialing and waits for the teleservice to prompt you for a number. The number following the P is your account number, PIN, etc. 3. Enter the digits that need to follow the pause, such as your account number. 4. Repeat steps 2 and 3 to add more pauses and numbers, if necessary. 5. Store the number in your Phonebook as you normally would by pressing the Save soft key and following from Step 3 on page 75. 33 CCaallll FFuunnccttiioonnss CCaallll FFuunnccttiioonnss Pause Dialing from a Stored Phonebook Entry 1. Call the number from the Phonebook. 2. Wait for the appropriate prompt from the number you are calling. 3. When prompted, press to send the DTMF
(Dual Tone Multi Frequency) number that follows your pause. SENDING DTMF flashes on the display and the transmitted tone sounds. Manual Pause Dialing You can enter pauses manually during the dialing process. 1. Enter the phone number of the service you want to call, such as a banks teleservice phone number. 2. Press the Pause soft key to insert a pause. The screen displays a P indicating a pause. 3. Enter the number to be sent after the pause by pressing the digit keys, and then press . 4. After connecting, wait for the prompt from teleservice. Press again after the prompt to send the additional number. Adjusting the Volume During a Call During a call, if you want to adjust the voice volume, use the volume keys on the left side of the phone. Press to increase the volume level and to decrease the level. The graphic on the display shows all five levels; the more bars you see, the higher the level. In the standby mode, you can also adjust the ringer volume for voice calls using these keys. 34 35 CCaallll FFuunnccttiioonnss Rejecting a Call To reject an incoming call, press the right soft key or . Press and hold one of the volume keys on the left side of the phone with the folder closed. Viewing Missed Calls If you fail to answer a call for any reason, the phone indicates a missed call by displaying a text notification on the screen. Additionally, if caller information is available, a Missed entry is created, and the screen displays the phone number of the last missed call. When the display informs you of the missed call, press to call the displayed number, or to clear the message and return to the standby mode. To view the list of the missed calls, refer to Missed on page 62. CCaallll FFuunnccttiioonnss Answering a Call When somebody calls you, the phone alerts you by ringing and blinking the service light. If the caller can be identified, the callers phone number, or name if stored in your Phonebook, displays. There are many ways to answer a call depending on your setting in the Answer Mode menu option
(Menu 6-5);
Setting option To answer the call, By Send Key press . By Folder Open open the folder or press . By Any Key open the folder or press any key except , , or the volume keys. To end the call, close the folder or press . Note: You can answer a call while using the Phonebook or menu features. The current operation stops. Silencing an Incoming Call You can silence the ringer when a call comes in by pressing one of the volume keys on the left side of the phone. 36 37 CCaallll FFuunnccttiioonnss Options During a Call Your phone provides a number of functions that you can use during a call. As many of these options are network services, you may not be able to use all of them at all times. Press the Menu soft key during a call to access the following options:
Mute/Quit: allows you to switch your phones microphone off, so that the other party cannot hear you. Example: You wish to say something to another person in the room but do not want the other party to hear you. Calls : allows you to access the Calls menu. See page 62. Phonebook: allows you to access the Phonebook menu. See page 68. Silent/Quit: does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call. Send My #: sends your phone number to the calling party or automated services. DTMF length: manipulates the audible DTMF (Dual-
Tone Multi-Frequency) tones. You can choose between Normal and Long. CCaallll FFuunnccttiioonnss Call Waiting You can answer an incoming call while you have a call in progress, if the Call Waiting menu (Menu 1-7) is enabled; see page 67. When a waiting call is detected, the incoming call alert sounds, depending on your network, and a text notification displays. To answer a waiting call:
1. To answer the call, press . The phone connects the calling party, and places the current party on hold. 2. Press again to switch between the two parties. 3. To end the call, press or close the folder. All of the calls are disconnected. Call Forwarding When the Call Forward menu (Menu 1-6) is enabled, your phone forwards incoming calls to another phone number, even while your phone turns off. Activating Call Forwarding does not affect outgoing calls made from this phone. For further details for activating Call Forwarding. See page 66. 38 39 CCaallll FFuunnccttiioonnss Three-Way Calling This feature enables you to conduct conference calls with two separate parties at the same time. The phone records both calls in the Outgoing Calls Log. You are billed airtime for each of the outgoing calls separately. Contact your service provider to activate Three-Way Calling. To make a three-way call:
1. During a conversation, enter the phone number for the third party and press
. 2. When the third party answers, press again to begin your three-way call. During a three-way call, if one of the callers hangs up, you and the remaining caller will stay connected. If you initiated the call and you hang up first, all three parties are disconnected. Entering Text At many times when using your phone, you will need to enter text; for example, when storing a name in the Phonebook, writing a text message or scheduling events in your calendar. You can enter alphanumeric characters into your phone by using your phones keypad. Your phone has the following text input modes:
Pinyin: allows you to enter a Chinese character using its Pinyin spelling, which is a phonetic system. Stroke: allows you to a Chinese character using the individual strokes labeled on the keys. T9 Word: allows you to enter English characters with only one keypress per character. Note: The Pinyin, Stroke and Word modes use the T9 input method. The T9 mode automatically compares your key presses to an internal linguistic database to determine the correct word. ABC: allows you to enter English characters by pressing the key labeled with the desired character until the character displays. Symbol, Symbol2: allows you to enter many different symbols and special characters. 123: allows you to enter numbers. 40 41 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Changing the Text Input Mode Using the Chinese Pinyin Mode Example: When you are entering a name 1. In the text entry screen, press the Mode soft key. 2. Scroll to the desired mode by pressing or
. Note: If you want to exit the Mode list without
. changing to a new mode, press 3. To select the highlighted mode, press the OK soft key. You can change between T9 Word and ABC mode to enter English words and choose Pinyin or Stroke to enter Chinese characters. To include a symbol or number(s) between characters, Symbol, Symbol2 and 123 modes are also available. 4. You will find the selected text input mode indicator on the display. Text input mode indicator Pinyin is a system to write the pronunciation of Chinese word using the Latin alphabet. With the Pinyin input method, you can enter Chinese characters by keying in the Pinyin string using the phones keypad. The phone automatically presents the matching words. This mode allows you to enter Pinyin characters with only one key per letter. Typing Characters in the Pinyin Mode 1. Press keys corresponding to the phonetic spelling, referring to the Roman letters printed on the keys. Notice that the choices in the Character Selection Field change. Example: Typing in the Pinyin mode Name:
PINYIN ni Pinyin Input Field Press and to enter ni. Mode The Character Selection Field 42 43 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt 2. If you cannot find the desired character from the display, press or to scroll through the choices in the Character Selection Field. When the character you are typing appears in the Character Selection Field, you may select it, without completing the Pinyin spelling. 3. To select a character, press to activate the Character Selection Field. A number, from 1 to 6 is added to the beginning of a corresponding character. When the Character Selection Field is activated, a normal press on to selects the corresponding character. Name:
PINYIN ni 1 2 3 4 5 6 Mode Press to select
. Note: You can deactivate the Character Selection Field by pressing . Using the Alternative Pinyins and Tones You can enter another character using alternative Pinyin for the keys you have pressed or assigning a tone for the selected Pinyin. Entering a tone for a character is optional, but it is especially useful if the Pinyin spelling is similar for several characters. 1. Press the keys corresponding to the letter you need. Press to display another Pinyin spellings and the Tone menu. For example, to get mi, press and . But the screen shows ni, another Pinyin for your keypress. Remember there are several Pinyins from the same key pressing. To get alternative Pinyins, press . Name:
PINYIN ni Press . 1: ni 2: mi 3: ng Mode Press and
. Tones menu All Pinyins by pressing and . 2. Press the associated keys to correspond to the Pinyin you want. For example, press to select mi. 44 45 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt 3. Press one of the keys to associated a tone;
, , , for four tones, for light tone. To exit without assigning a tone, press . For example, to enter a third tone for Pinyin mi, press . You can get the character sets for the Pinyin mi with the third tone. 1: ni 2: mi 3: ng Press for the third tone Name:
PINYIN mi 1 2 3 4 5 6 Mode Character sets for the Pinyin mi with the third tone. Alternative Pinyin by pressing and . 4. If you cannot find the desired character from the display, press to scroll through choices in the Character Selection Field. 5. If you find the character you want to enter, press a key ( to ) to corresponding the character. Notes:
You may delete a previously entered tone by pressing . To exit the Tone menu without making a selection, press . Rapid Character Entry Rapid character entry is easy in any mode, using the Character Selection Field. As you enter characters, your phone predicts the next character you might want and presents choices in the Character Selection Field. For example, when you type the word zhong guo
), if you enter the first character using the following keystrokes; , , , , ,
, you do not have to complete the Pinyin spelling to include guo (
). With no extra typing, the letter displays conveniently in the Character Selection Field for you to choose. Scrolling To move the cursor to the left or right through your text message, press or when the Character Selection Field is not activated. Inserting a Space Insert a space between characters, press in the Text Area. Clearing Strokes and Characters Press one or more times to remove strokes one by one to the left. Once the Pinyin input field is empty, pressing removes a letter from the Text Area. To clear all of the strokes and characters on the display, press and hold . 46 47 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt Using the Chinese Stroke Mode This mode allows you to enter individual Chinese strokes, in written order, from top to bottom, and from left to right. Even though there are many different strokes used to create Chinese characters, the strokes are classified into 5 basic categories; heng, shu, pie, dian and zhe. The basic strokes are printed on keys to on the keypad. To enter a stroke, press the key printed with the stroke that most closely represents the exact stroke you desire. The table shows the stroke/key relationship:
Categories Keys Strokes Represented in Each Category 48 Typing Strokes and Characters in the Stroke Mode 1. To type a character, press the keys corresponding to its component strokes. Press keys on the handset in the order that you would write the strokes, using one press per desired stroke. Example: Typing in the Stroke mode Name:
STROKE 7 8 9 0 Key Stroke Input Field Press then to enter to enter
, Mode The Character Selection Field. To select
, press . 2. The phone displays your strokes in the Key Stroke input field and offers character choices in the Character Selection Field. As you enter strokes, notice that the choices in the Character Selection Field change. To scroll through the choices in the Character Selection Field, press or . Note: If you are uncertain of the order of one or more strokes, press in place of each questionable stroke. Continue entering strokes until the character displays in the Character Selection Field or until you finish the character. 49 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt 3. When the character you are typing appears in the Character Selection Field, you may select it without finishing the stroke sequence for the character. Characters displayed in the Character Selection Field correspond to keys 7 to # on the keypad. To select a character from the Character Selection Field and add it to your message, press the corresponding key to . Rapid Character Entry Rapid character entry is easy in any mode, using the Character Selection Field. As you enter characters, your phone predicts the next character you might want and presents choices in the Character Selection Field. For example, try typing the characters zhong guo
) using the following keystrokes; , ,
. Even though guo (
) is the twelve stroke character pair, your phone allows you to enter it in only three key presses. Scrolling To move the cursor to the left or right through your text, press or . Clearing Strokes and Characters Press one or more times to remove strokes one by one to the left. Once the Key Stroke input field is empty, pressing removes a letter from the Text Area. To clear all of the strokes and characters on the display, press and hold . 50 Using the T9 Word Mode To type a word, press keys corresponding to the letters you need. Remember the following as you are typing:
1. Press keys on the phone just once per desired letter. For example, to enter Hello, press , ,
, , and . 2. The word you are typing appears on the display. It may change with each key press. 3. Type to the end of the word before editing or deleting any keystrokes. If the word that appears on the display is not the word that you desire, press times to display alternative word choices for the keys you have typed. one or more For example, both of and me have the sequence of and . The phone displays the most commonly used choice first. 4. Put a space between words by pressing
. To type words not found in the T9 Word mode, you need to change the text input mode to the ABC mode. 51 EEnntteerriinngg TTeexxtt Smart Punctuation You can insert periods, hyphens, and apostrophes by pressing
. T9 Word applies rules of grammar to insert the correct punctuation. Notice that used twice in this example to display two punctuation marks:
is L e t s e a t . Changing the Case To shift the case of the next letter(s) that you type, press
(T9word), Initial Capital (T9Word) and Capitals Lock
(T9WORD). There are three cases: Lower Case Including a Number You can include a number between letters without exiting the T9 Word input mode. Press and hold the desired number key. Scrolling To move the cursor to the left or right through your text, press or . Clearing Letters and Words one or more times to clear letters one by Press one to the left. Press and hold to erase all of the letters on the display. 52 EEnntteerriinngg TTeexxtt Using the ABC Mode When typing in the ABC mode, you should press key labeled with the required letter:
- once for the first letter
- twice for the second letter and so on. This method is called Multi-tap typing. For example, you need to press quickly to display the letter C and quickly to display the letter K. three times two times Refer to the table below for the list of characters assigned to each key. List of characters available:
Key Characters in the Order Displayed
> _ + = \ { } $ [ ] 1 B A E D H G J K M N Q P T U W X 0 C F I L O R V Y 2 3 4 5 6 S 8 Z 9 7
(Caps Lock mode) 53 EEnntteerriinngg TTeexxtt EEnntteerriinngg TTeexxtt The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to automatically move to the right, and enter the next letter. Changing the Case To shift the case of the next letter(s) that you type, press Initial Capital (Abc) and Capitals Lock (ABC). There are three cases: Lower Case (abc), Inserting a Space Press to insert a space between words. Including a Number You can include a number between letters without exiting the ABC input mode. Press and hold the desired number key. Scrolling To move the cursor to the left or right through your text message, press or . Clearing Letters and Words Press one or more times to clear letters one by one to the left. Press and hold to erase all of the letters on the display. Using the Symbol/Symbol2 Mode The Symbol, Symbol2 mode enables you to enter symbols into your text. Name: 12 Name:
SYMBOL SYMBOL2 1 2 3 4 5 6 7 8 9 1 2 3 4 5 Mode OK Mode Press or to display more symbol sets. Press the keys corresponding to the desired mark, then the phone automatically switches back to the text entry mode used just prior to selecting the Symbol mode. Using the 123 Mode The 123 mode enables you to enter numbers into your text. Press the keys corresponding to the desired digits, and manually switch back to the text entry mode of your choice; see page 41 for changing the text input mode. 54 55 UUssiinngg tthhee MMeennuuss Accessing a Menu Function by Using its Shortcut The menu items, such as menu, submenus and setting options, are numbered and can be accessed quickly by using their shortcut numbers. Note: The numbers assigned to each menu function are indicated on the list on page 60. 1. In the standby mode, press the Menu soft key to access the menu mode. 2. Enter the first digit of the shortcut number. Repeat this for each digit of the shortcut number. Example: Changing the display language Press , , and . 6 enters Settings, 2 selects Display, and 3 selects Language. 3. Scroll with the navigation keys to select the setting of your choice. 4. Press the Save soft key to confirm the chosen setting. Using the Menus The phone offers a range of functions that allows you to tailor the phone to your needs. These functions are arranged in menus and submenus. The menus and submenus can be accessed by scrolling or using the shortcuts. Accessing a Menu Function by Scrolling 1. In the standby mode, press the Menu soft key to access the main menu mode. 2. Scroll with and to reach the desired main menu, for example, Settings. Press the Select soft key to enter the menu. 3. Find the menu option you want, for example, Display, by scrolling with and . Press the Select soft key to enter the menu option. If the menu you have selected contains submenus, such as Language, repeat this step. 4. Scroll with the navigation keys to select the setting of your choice. 5. Press the Save soft key to confirm the chosen setting. Notes:
To return to the previous menu level, press . You can exit the menu without changing the menu settings by pressing . 56 57 UUssiinngg tthhee MMeennuuss UUssiinngg tthhee MMeennuuss List of Menu Functions The list shows the menu structure available and indicates the number assigned to each option. 1: Calls 1-1: Missed 1-2: Incoming 1-3: Outgoing 1-4: Erase Logs 1-5: Air Time 1-4-1: Missed 1-4-2: Incoming 1-4-3: Outgoing 1-4-4: All Calls 1-5-1: Last Call 1-5-2: Total 1-5-3: LifeTime 1-5-4: Erase Total 1-6: Call Forward 1-6-1: Busy 1-6-2: No Answer 1-6-3: Unconditional 1-6-4: Busy/NoAnswer 1-7: Call Waiting 2: Phonebook 2-1: Find 2-2: Add 2-3: Group Set 2-4: My Phone #
58 3: Message 3-1: New Message 3-2: Inbox 3-2-1: Voice 3-2-2: TxtCard 3-2-3: TxtPhone 3-3: Outbox 3-3-1: Card 3-3-2: Phone 3-4: Erase Msgs 3-4-1: Voice Notif. 3-4-2: Inbox Card 3-4-3: Inbox Phone 3-4-4: Outbox Card 3-4-5: Outbox Phone 3-4-6: All Messages 3-5-1: Scroll Timer 3-5-2: Msg. Reminder 3-5-3: New Message 3-5-4: Canned Msg. 3-5: Msg Setup 3-6: Web Alert 4: Scheduler 4-1: View Month 4-2: Jump To Date 4-3: Alarm Set 4-4: Calculator 4-5: Today 4-6: To Do List 4-7: Memo Pad 4-8: Countdown 4-9: World Time 59 UUssiinngg tthhee MMeennuuss 5: Entertainment UUssiinngg tthhee MMeennuuss 5-1: Music Box 5-1-1: Voice Calls 5-1-2: Messages 5-1-3: Alarm/Scheduler 5-2: Image Box 5-2-1: Opening 5-2-2: Closing 5-2-3: Wallpaper 5-3-1: ChickenRun 5-3-2: MobileCop 5-3: Games 5-4: Fun Box 5-4-1: Get In Melody 5-4-2: Get In Animation 5-5: Memory Status 5-5-1: Total 5-5-2: Music 5-5-3: Image 6: Settings 6-1: Sounds 6-1-1: Ringer Volume 6-1-2: Key Tone 6-1-3: Alerts 6-1-2-1: Tone Volume 6-1-2-2: Tone Type 6-1-3-1: Minute Beep 6-1-3-2: Service Area 6-1-3-3: Connect 6-1-3-4: Disconnect 6-1-3-5: Fade 6-1-3-6: Roam Area 6-1-3-7: Folder 6-1-4: Voice Volume 6-1-5: Power On/Off 6: Settings (continued) 6-2: Display 6-3: Auto Retry 6-4: Auto Answer 6-5: Answer Mode 6-6: Roam Option 6-7: Security 6-2-1: Banner 6-2-2: Backlight 6-2-3: Language 6-2-4: Set Time 6-2-4-1: Main Clock 6-2-4-2: Dual Clock 6-2-5: Service LED 6-2-6: Contrast 6-7-1: Lock Mode 6-7-2: Change Lock 6-7-3: Emergency #
6-7-4: Voice Privacy 6-7-5: Restriction 6-7-6: Clear Memory 6-7-7: Reset Phone 6-7-8: Card Setup 6-7-8-1: PIN Check 6-7-8-2: Change PIN 6-7-8-3: UIM Lock 6-8: Entry Method 6-9: Data Option 7: U-MAX 7-1: U-Info 7-2: U-Magic 7-3: UNI-INFO 60 61 Calls You can use the Calls menu to:
view and dial the last missed, outgoing or incoming numbers. erase the numbers in the call logs. view the duration of calls. set the phone to receive the second call or to forward incoming calls to the preset number. Missed (Menu 1-1) If Caller Line Identification is available, your phone keeps a list of the last 20 incoming calls that you failed to answer. Contact your service provider for the availability. 1. Press or to find the desired number or name, if saved in the phonebook. 2. Press the Select soft key to select the highlighted number. The dialed number, or name if stored in the phonebook, is displayed. CCaallllss When you access the menu options, the following options are available:
Talk: dials the selected number. Save: allows you to save the number in the phonebook. Prepend: allows you to add an area code or feature code to the number before calling the number. Erase: allows you to erase the selected number. Incoming (Menu 1-2) This option lets you view up to 20 of the last calls you received if you are subscribed to the Caller Line Identification service. Contact your service provider for more information about this service. When you access this menu, the list of the incoming calls displays. For further details about scrolling through the list and accessing the call log, see Missed on page 66. 3. To Press
. place a call to the displayed number use the menu the Menu soft key. For options details about the options, see the following page. view other calls the navigation keys. return to the standby mode
. 62 63 CCaallllss Outgoing (Menu 1-3) The phone stores up to 20 of the last calls you dialed. When you access this menu, a list of the outgoing calls displays. For further details about scrolling through the list and accessing the call log, see Missed on page 66. Erase Logs (Menu 1-4) In this menu, you can erase the entries stored in each of the three call logs; outgoing, incoming and missed calls. You can also erase all call log entries at one time by selecting All Calls. When a confirming message appears, select Yes to erase the logs. If you want to cancel the selection, select No. CCaallllss Air Time (Menu 1-5) Your phone records the amount of air time, or talk time, used. Using this option, you can view the number of the calls to or from your phone and the air time for all calls. You can easily erase the air time record at any time. Note: This feature is not intended to be used for billing purposes. The following options are available:
Last Call: shows the air time of the last call. Total: shows the number of all calls made to or from your phone and the total duration of the calls since the air time counter was last set to zero by using the Erase Total option. LifeTime: shows the number and total duration of all calls made to or from your phone since the phone was shipped from the factory. Erase Total: erases the Total air time measurement and resets the air time counter. 64 65 CCaallllss To deactivate the call forward setting:
1. Select the call forwarding option. 2. Select Disable and press the Save soft key. Call Waiting (Menu 1-7) The Call Waiting feature alerts you of incoming calls while you are on a call. To enable the feature, select Enable by using the navigation keys and press the Save soft key. When this feature is enabled, you can respond to an incoming call by pressing while you are on a call. This puts the first caller on hold and answers the second call. To switch to the first caller, press again. Note: If you press or close the folder, all calls are disconnected. To disable, select Disable and press the Save soft key. CCaallllss Call Forward (Menu 1-6) This network service allows incoming calls to be forwarded to another number. Note: This option is only available when your network operator supports it. Contact your service provider to check the availability. The following options are available:
Busy: Calls are forwarded if you are already on the phone. No Answer: Calls are forwarded if you do not answer the phone. Unconditional: All of the calls are forwarded. Busy/NoAnswer: Calls are forwarded if you are already on the phone or do not answer. To set your forwarding options:
1. Select the type of call forwarding. 2. Select Enable and press the Save soft key. 3. Enter the area code and phone number to which your calls will be forwarded. 4. Press the Send soft key. The phone sends your setting to your network. Once Call Forwarding is enabled, a notification text appears to inform you that your call will be diverted, each time a call is forwarded or you switch the phone on. 66 67 Phonebook You can store phone numbers and their corresponding names in the memories of your UIM card and the phone. The UIM card and phone memories, although physically separate, are used as if they were a single entity, called the phonebook. Find (Menu 2-1) This option allows you to find an entry using a persons name, entry number, group name or memory location. Note: You can quickly access this menu by pressing The Find soft key in Standby Mode. To change the finding method, press or until the option you want to use displays; By Name, By Entry, By Group or By Storage. By Name When you select this method, the whole list of all of the phonebook entries appears in alphabetical order. 1. Press to move to the name input box. 2. Enter the first few letters of the name you want to find. 68 PPhhoonneebbooookk If you want to find a Chinese name, press the Menu soft key and enter the name and press the OK soft key. For more information on entering text, see page 41. Your phone highlights the first matching name. 3. If necessary, press or to scroll through the entries. 4. When an entry is highlighted:
Press to place a call to the entrys speed-dial number. Press the Menu soft key to access the following options:
- Edit: edits the entrys phone number, name, location number and other information.
- Erase: erases the entry.
- Add New: adds a number to the phonebook. You can create a new entry or add it to an existing entry. For more information on adding a number, refer to page 71. Press the OK soft key to select the entry. Information about the entry displays. Move to each item by pressing or . Press the Menu soft key to use one of the following options:
- Talk: dials the number labeled as SpeedDial.
- Edit: allows you to change the selected item.
- Copy: is only available when you select a number item in phone memory entry or an item in UIM card. 69 PPhhoonneebbooookk PPhhoonneebbooookk This option allows you to copy the number in the other memory. From UIM card to phone: Select a category icon for labeling the phone number and press the Select soft key. From phone to UIM card: Press the Save soft key.
- Erase: erases the entry. If you select a number item, only the number is erased. Press to return to the previous screen. Press to exit this menu. By Entry When you select this method, the whole list of all of the phonebook entries appears in numeric order. 1. Enter the number you want to find. Your phone highlights the first matching name. 2. Follow Step 3 in By Name on page 69. By Group When you select this method, a list of the phonebook entries in a group appears. 1. Move to the group selection area by pressing . 2. Press or to scroll through the groups. Each time you select a group, a list of the associated entries displays. 3. Follow Step 3 in By Name on page 69. 70 By Storage When you select this method, a list of the phonebook entries in the UIM cards memory appears. 1. Move to the memory selection area by pressing
. 2. Press or to scroll through the memory, Card and Phone. Each time you select a memory, a list of the associated entries displays. 3. Follow Step 3 in By Name on page 69. Add (Menu 2-2) This menu allows you to add a new entry to your phonebook. You can save a phone number or an e-mail address. Adding a New Entry Using a Number In the phone memory, a name can contain up to 5 numbers in a different category; Home, Office, Mobile, Pager, and Fax. You can save only one number with a name in the card memory. 1. After the Add menu option (Menu 2-2), select Number from the pop-up list and press the Select soft key. 2. Enter a number you want to save and press the Save soft key. 3. Press the Save soft key to accept New Entry. 71 PPhhoonneebbooookk PPhhoonneebbooookk 4. Enter a name and press the OK soft key. You can enter up to 14 characters in English or 12 characters in Chinese. For more information on how to enter characters, see page 43. 5. Your phone shows the detail information. Highlight the option you want to customize by pressing or . Name: Press the Edit soft key to edit the name you entered in Step 4, if necessary. You can enter a name in this step if one has not already been entered. Storage: The UIM card memory is automatically selected. To save the number in the phone memory, press the Phone soft key. The screen showing category icons appears. Select an icon using the navigation keys and press the Select soft key. Location: The first available location displays. If you need to, enter the location number using the number keys or press or until the location number you want to use appears. The following options are available only when you select the phone memory:
Home/Office/Mobile/Pager/Fax: You can add numbers for each category. The phone number you have entered in Step 1 displays as a number in the storage youve chosen. You can also change the number. E-Mail/E-Mail2: Press the Edit soft key to enter an e-mail address. For more information on how to enter characters, see page 43. ETC: Press the Edit soft key to add a memo about the person. For more information about how to enter characters, see page 43. SpeedDial: Select the category icon of the number you want to use for speed dialing, by pressing or . Relation: Select one of the predefined relation groups, where the entry is included. Grouping the entries enables you to search for a number in the desired group. See page 70. Ringer Melody: Press the Edit soft key to set a unique ringer melody for the entry. 6. Repeat Step 5 until you complete the contact information of the entry. 7. Press the Save soft key to save the entry. After storing, the phone displays the memory status of the phonebook, then automatically returns to the Phonebook menu screen. 72 73 PPhhoonneebbooookk PPhhoonneebbooookk Saving a Phone Number from the Standby Mode 1. In the standby mode, enter a number you want to save. OR Press to end the call. The call time and the phone number display. 4. Find the name to which you want to add the number using the navigation keys; see page 76. 5. Select a category by pressing or and press the Select soft key. 6. Follow from Step 5 in Adding a New Entry Using a Number. 2. To store the phone number, press the Save soft key. Adding a New Entry Using an E-mail Address 3. Enter a name and press the OK soft key. For more information on entering text, see page 41. 4. Follow from Step 5 in Adding a New Entry Using a Number on page 71. Adding a Number into an Existing Entry You can store up to 5 numbers in a name entry saved in the phone memory by assigning them to the different types. 1. After the Add menu option (Menu 2-2), select Number from the pop-up list and press the Select soft key. 2. Enter a number you want to save and press the Save soft key . 3. Press or to select Find and press the Save soft key. This option allows you to store an e-mail address as a Phonebook entry. 1. After the Add menu option (Menu 2-2), select E-mail from the pop-up list and press the Select soft key. 2. Enter the e-mail address and press the OK soft key. For more information on entering text, see page 41. 3. Follow from Step 3 in Adding a New Entry Using a Number on page 71. Adding a New Entry Using a Memo You can make a memo about a person as a Phonebook entry. 1. After accessing the Add menu option (Menu 2-2), select ETC from the pop-up list and press the Select soft key. 74 75 PPhhoonneebbooookk PPhhoonneebbooookk My Phone Number (Menu 2-4) This option shows your phone number. To change the phone number:
1. Press the Edit soft key when the number displays. 2. Enter a new phone number and press the Save soft key to save it. 2. Enter a memo and press the OK soft key. For more information on entering text, see page 41. 3. Press the Save soft key to accept New Entry. Note: To add the memo to an existing entry, select Find. Find the name from the Phonebook list, and press the OK soft key. 4. Enter a name and press the OK soft key. 5. Follow from Step 5 in Adding a New Entry Using a Number on page 71. Group Set (Menu 2-3) This option allows you to change a relation groups name. 1. Press or to select the group you want to rename. 2. Press the Select soft key . 3. Press to erase the old group name. 4. Enter a name. For more information on entering text, see page 41. 5. Press the OK soft key to save the new name. 76 77 Message In this menu, you can:
write new SMS (Short Message Service) messages and check your incoming messages. use the U-MAIL service, provided by your service provider. Your phone can receive voice mail messages, text messages, and web messages from your web server. Your phone can also send text messages if your system supplier provides this service. Incoming messages are received even when your phone is in the lock mode. However, the screen will not display information about the message. To access the message, you need to unlock the phone. If you receive an incoming message during a call conversation, your phone sounds an alert tone or vibrates, depending on your sound settings. Note: You can quickly enter this menu by pressing and holding in Standby Mode. New Message (Menu 3-1) You can create short text messages and send them to multiple mobile phones. MMeessssaaggee//UU--MMAAIILL 1. Enter the message contents and press the OK soft key. You can enter up to 140 characters in Chinese or 160 characters in English. To change the input mode, press the Mode soft key and press the navigation keys to find the desired mode. For more information on entering text, see page 41. You can use up to 20 canned messages by pressing the Mode soft key and selecting Canned msg. Select a message from the list. For more information about canned msg, see page 84. 2. Select one of the following options, and press the OK soft key. Send & Save: allows you to save a copy of the message and then send the message to the required destination. You can read the message in your Outbox. Send only: allows you to send the message. The message will be deleted after sending. Save only: allows you to save the message so that it can be sent later. You can read the message in your Outbox. 3. Enter a phone number. If you press the Menu soft key and select Phone Book, you can search your Phonebook for a number. 78 79 MMeessssaaggee//UU--MMAAIILL MMeessssaaggee//UU--MMAAIILL 4. To send the message to multiple destinations, press and enter another number. Repeat this step to add more destinations. You can send the message to up to 10 destinations at one time. 5. When you finish entering the numbers, press the OK soft key to send or save the message. Your phone informs you of whether or not the message was successfully sent, and returns to the Message menu screen. Indox (Menu 3-2) Your phone can store SMS messages and their corresponding Caller ID in your UIM card and phones memories. If your memory is full, the screen displays a text notification and rejects additional incoming messages until you erase the obsolete ones. Voice Messages When you receive a voice mail message, the text notification displays. Press , and the phone dials the voice mail center. Then follow the voice prompts from the system to listen to the message. You can also check your voice messages by accessing the Voice menu option (Menu 3-2-1). For further details about the voice mail service and its availability, contact your service provider. Text Messages When the phone receives a text message, the New Text Message icon (
) and a text notification with the call back number appear. Press the Select soft key to view the message immediately. When you access the TxtCard menu (Menu 3-2-2) or TxtPhone menu (Menu 3-2-3), a list of the received message displays. An icon displayed in the list means the messages status:
: displays when you have read the message.
: indicates that a duplicate message was sent.
: means that the message is urgent. Press or to scroll to the message you want to read and press the View soft key. The phone displays the contents. If necessary, press or to scan through the message. While viewing a message, press the Menu soft key to use the following options:
Reply: allows you to send a reply message to the sender. Forward: allows you to send the message to other people. Call/Save: Press to make a call to the senders phone number. Press the Save soft key to save it. Erase: erases the message from your Inbox. 80 81 MMeessssaaggee//UU--MMAAIILL Outbox (Menu 3-3) Your phone can store your outgoing SMS messages in your UIM card and phones memories. When you access the Card menu (Menu 3-3-1) or Phone menu (Menu 3-3-2), you can see the message list. An icon displayed in the list means the messages status:
: indicates that the message was successfully delivered.
: indicates that the message was not sent. Press or to scroll to the message you want to review and press the View soft key. The display shows the contents along with the destination number. If necessary, press or to scan through the message. While viewing a message, press the Menu soft key to use the following options:
Resend: allows you to send the message to other people. Call/Save: Press to make a call to the senders phone number. Press the Save soft key to save it. Erase: erases the message from your Outbox. MMeessssaaggee//UU--MMAAIILL Erase Messages (Menu 3-4) Using this menu option, you can erase all of the messages in each message box; voice notification, card inbox, phone inbox, card outbox and phone outbox. You can also erase all of the messages at one time using the All Messages option. Msg Setup (Menu 3-5) Using this menu, you can set up various options for receiving or sending messages. Scroll Timer (Menu 3-5-1) If an incoming message is too long for the display, the phone scrolls the screen automatically. You can set the time interval in which the phone scrolls to the next screen, 1 through 5 seconds. When this option is set to Off, you need to manually scroll to the next screen using or . Message Reminder (Menu 3-5-2) When a message is received, your phone alerts you by sounding the specified ringer. You can set how often this will happen. 82 83 MMeessssaaggee//UU--MMAAIILL MMeessssaaggee//UU--MMAAIILL 2. Clear the existing message using , if necessary, enter a new message. For further information on how to enter text, see page 41. 3. Press the OK soft key to save the message. Web Alert (Menu 3-6) In this menu, you can view a web message from your web server. For details about reading a web message, refer to Text Messages on page 81. Off: The phone doesnt alert after you receive an incoming message but the New Text/Voice Message icon appears. Once: When you receive an incoming message, the phone alert you just once until you press any key or open and close the folder. Every 2 min: When you receive an incoming message, the phone alert you every 2 minutes until you press any key or open and close the folder. New Message (Menu 3-5-3) You can set up the following options as default settings when creating a new message. Priority: allows you to set the priority level of messages from Normal, Interactive, Urgent or Emergency. Delivery Ack: allows you to activate or deactivate the delivery acknowledgement feature. When this is activated, the network informs you when your message is delivered to the recipient. Select On to turn the feature on or Off to turn it off. Canned Messages (Menu 3-5-4) Your phone has 11 preset messages to enable you to use them when writing a new message. You can change them, if necessary. You can also add up 9 messages. 1. Press or to highlight the message you want to change. Press the Select soft key. To add a new message, select an empty location. 84 85 Scheduler The Scheduler feature enables you to:
keep track of important dates and events. set the phone to ring at a specified time. use the phone as a calculator. create a list of things to do. set and count down to D-Day. check the current time in another part of the world. Note: If you did not set the current date and time, you cannot use some features in the Scheduler. See page 110 for setting the time and date. View Month (Menu 4-1) This option allows you to view the current month, as well as the past or future month in the calendar format. You can be alerted by the Calendar function before an event commences. When you access this menu, the current day is automatically indicated. Note: You can quickly enter this menu by pressing and holding in Standby Mode. Selecting a Day on the Calendar You can move to the next or the previous day by pressing or . You can move up or down the Calendar by one week by pressing or . To display the next or previous month, use the volume keys on the left side of the phone. SScchheedduulleerr On the calendar, press the Menu soft key to use the following options:
View: allows you to view the scheduled events of the selected day. Add new: allows you to add a new event on the selected day. Scheduling an Event You can schedule up to 9 events for one day and 20 events total. 1. Select a day from the calendar, referring to Selecting a Day on the Calendar on page 86, and press the OK soft key. 2. Enter your event contents and press the OK soft key. For more information on entering text, see page 41. 3. Enter the start time and date using the numeric keys and press . Note: You need to enter the time in 24-hour format. 4. Enter the end time and date using the numeric keys and press . 5. Select the time when an alarm will inform you of your event by pressing or . If you select No alarm, the phone will not alert you. 6. Press the Save soft key to save your event. 86 87 SScchheedduulleerr SScchheedduulleerr Viewing Your Schedule Days with scheduled events are seen in a rectangle on the calendar when you access the View Month menu option (Menu 4-1). Select one of them and press the View soft key. The first event displays. Scroll to the events you want to view by pressing or . If necessary, press to display more contents of the event. While viewing an event, press the Menu soft key to use the following options:
Add new: adds a new event. Edit: edits the event. Erase: erases the event. Erase All: erases all of scheduled events. Jump To Date (Menu 4-2) This feature allows you to specify a date so that you can easily access the day without scrolling through the calendar. 1. Enter the date using the numeric keys and press the Save soft key. 2. When the date you entered is highlighted on the calendar, press the OK soft key to access it. For further details about scheduling an events, see page 91. Alarm Set (Menu 4-3) This option allows you to set the alarm to ring at a specific time. To set the alarm:
1. Select the alarm frequency option by pressing or and press the Save soft key. Once: The alarm rings only once and is then deactivated. Daily: The alarm rings every day at the same time. 2. Enter the required time for the alarm to ring by using the numeric keys. Note: You must enter the time in 24-hour format. 3. Press the Save soft key to save the setting. To stop the alarm when it rings, simply open and close the folder or press any key. To deactivate the alarm, access the Alarm Set menu option, select Off from the alarm frequency options and press the Save soft key. 88 89 SScchheedduulleerr Calculator (Menu 4-4) Using this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication and division. To perform a calculation:
1. Enter the first number using the numeric keys. Notes:
To erase any mistakes or clear the display, press . Use to enter a decimal point and to change the sign of a number to a negative (-). 2. Select the operation for your calculation by pressing the navigation keys according to the illustration on the display; + (add), - (subtract), x (multiply), (divide). 3. Enter the second number. 4. To get the result, press the OK soft key. 5. Repeat steps 1 to 4 as many times as required. SScchheedduulleerr Today (Menu 4-5) You can schedule up to 9 events for the current day, indicating each events start and end time. Events scheduled for future dates automatically appear on your Today display for that particular day. For further details about scheduling and viewing events, refer to View Month on page 86. To Do List (Menu 4-6) This feature allows you to enter up a list of tasks you need to do and assign both a priority and a deadline to them. You can store up to 20 tasks. Creating a To-Do Item 1. Enter the task contents and press the OK soft key. For more information on entering text, see page 41. 2. Select High or Low priority using or and press . 3. Enter the time and date by which your task needs to be done, using the numeric keys. Note: You need to enter the time in 24-hour format. 4. Press the Save soft key to save the task. 90 91 SScchheedduulleerr SScchheedduulleerr Viewing a Task When you access the To Do List menu option (Menu 4-6), the first task displays along with the deadline and the associated priority highlighted; #1 for high priority or #2 for low priority. Scroll to the task you want to view by pressing or . While viewing a task, press the Menu soft key to use the following options:
Add new: adds a new task. Edit: edits the task. Erase: erases the task. Erase All: erases all of tasks. Memo Pad (Menu 4-7) This feature allows you to make memos of important things you need to remember. Writing a New Memo 1. Enter what you need to remember. For further details on entering text, see page 41. 2. Press the OK soft key to save the memo. Viewing a Memo The list of your memos displays when you access the Memo pad menu (Menu 4-7). To view details, press or to scroll to the memo you want to view from the list and press the Select soft key. While viewing a memo, press the Menu soft key to use the following options:
Add new: adds a new memo. Edit: edits the memo. Erase: erases the memo. Erase All: erases all of memos. Countdown (Menu 4-8) This menu helps you know how much time it takes for you to do something or how many months, days, hours and minutes until a specific event occurs. You can create up to 20 Countdown timers using this feature. Creating a Countdown Timer 1. Enter a name for your Countdown timer and press the OK soft key . For more information about how to enter characters, see page 43. 92 93 SScchheedduulleerr SScchheedduulleerr World Time (Menu 4-9) You can use this menu option to find out what time it is in another part of the world. Press the navigation keys to scroll to the desired time zone. 2. Enter the time and date from which you want to count down. Notes:
You need to enter the time in 24-hour format. You can enter between 1981 and 2099 for the year. 3. Press the Save soft key to save the timer. Viewing a Countdown Timer The first Countdown timers displays when you access the Countdown menu (Menu 4-8). Scroll to the timer you want to view by pressing or . While viewing a timer, press the Menu soft key to use the following options:
Add New: creates a new timer. Edit: edits the timer. Erase: erases the timer. Erase All : erases all of timers. 94 95 EEnntteerrttaaiinnmmeenntt Whenever you scroll the melodies in the category, it plays a melody in the category is highlighted, press the Save soft key to select it, and press the Erase soft key to erase it. Messages (Menu 5-1-2) This option allows you to have a distinctive ringer for incoming messages. Alarm/Scheduler (Menu 5-1-3) This option allows you to set an ringer for alerting your alarm or schedule. The melodies are the same when you select the Voice Calls (Menu 5-1-1). Entertainment The Entertainment feature enables you to:
coustomize various sound settings. set the images to be displayed in your display. enjoy games. check the status of your phone memory. Music Box (Menu 5-1) You can customize various sound settings. Voice Calls (Menu 5-1-1) This option allows you to set a unique ringer for incoming voice calls. Following categories are available. Basic Melody: allows you to select one of predefined melodies. U-Info Melody: allows you to select one of melodies downloaded from U-Info. U-Magic Melody: allows you to select one of melodies downladed from U-Magic. Fun Box Melody: allows you to select one of melodies downloaded from Fun Box. My Melody: allows you to select on of melodies downloaded from PC Link. 96 97 EEnntteerrttaaiinnmmeenntt Image Box (Menu 5-2) This option allows you to select the image to be displayed in the display. Opening (Menu 5-2-1) This option allows you to select the image to be displayed when you switch the phone on. Basic Image: allows you to select one of the predefined images. U-Info Image: allows you to select one of images downloaded from U-Info. Fun Box Image: allows you to select one of images downloaded from Fun Box. Closing (Menu 5-2-2) This option allows you to select the image to be displayed when you switch the phone off. Basic Image: allows you to select one of the predefined images. U-Info Image: allows you to select one of images downloaded from U-Info. Fun Box Image: allows you to select one of images downloaded from Fun Box. Wallpaper (Menu 5-2-3) This opion allows you to select the wallpaper image. Following categories are available. 98 EEnntteerrttaaiinnmmeenntt Basic Image: allows you to select one of predefined images. U-Info Image: allows you to select one of images downloaded from U-Info. U-Magic Image: allows you to select one of images downloaded from U-Magic. Fun Box Image: allows you to select one of images downloaded from Fun Box. Games (Menu 5-3) You can experience the fun of playing games on your phone. Note: You can quickly enter this menu by pressing and holding in Standby Mode. Select one of the games and press any key to start it. When you start a game, the following menus are available. New Game: allows you to start a new game. High Score: shows you the high score table. Help/Key Info: shows you short guide for the game. Continue: allows you to continue the game. This menu is only available when you paused this game before. While playing a game:
To pause/resume the game key. Press the exit the game key. 99 EEnntteerrttaaiinnmmeenntt Chicken Run (Menu 5-3-1) The goal of this game is to move eggs or chicks to the destination carefully. When you select New Game menu, the first screen displays two menus. Select Start menu to start a new game. Select Option menu to change following options. Diffiiculty : allows you to change the level of the game among Easy, Normal, and Hard. Sound : allows you to turn the sound on or off while playing the sound. Vibration : allows you to trun the vibration on or off while playing the game.
: allows you to move the previous screen. Once the game starts, you need to control blue and red control items to move eggs ro chicks carefully. To control the blue items, press or , and press or for the red ones. When you complete the given aims, the level goes up and the speed goes up. 100 EEnntteerrttaaiinnmmeenntt Moile Cop (Menu 5-3-2) The goal of this game is to shoot the enemies. When you select New Game menu, the first screen displays three menus. Select Start menu to start a new game. Select Option menu to change following options. Sound : allows you to turn the sound on or off while playing the sound. Vibration : allows you to trun the vibration on or off while playing the game.
: allows you to move the previous screen. Select Help menu to see the simple guide. Once the game starts, enemies in red appear at target position. Check the position and press appropriate number key to shoot the enemy. 1 4 2 5 3 6 Sometimes enemies hold hostages, If you shoot the hostage, you will lose the bonus points. After running out of the bullets, press , or to reload them. Whenever you kill al the enemies for one stage, you can go to the next stage. 101 EEnntteerrttaaiinnmmeenntt Fun Box (Menu 5-4) You can access Samsung Fun Box on the Internet and dlownload various media items, such as melodies, images and games. Samsung Fun Box is the preset web site providing Samsung phone users with attractive download services. Get In Melody In this menu, you can access the preset web page to download ring tones and melodies. You can view the list of the downloded melodies in the Fun Box Melody box in Music Box. Get In Animation In this menu, you can access the preset web page to download images. You can view the list of the downloaded images in the Fun Box Image box in Image Box. EEnntteerrttaaiinnmmeenntt Memory Status (Menu 5-5) Total (Menu 5-5-1) You can see the total, used and free space. Music (Menu 5-5-2) You can see the list of melodies downloaded from Web, Samsung Fun Club or the PC link program. Image (Menu 5-5-3) You can see the list of images downloaded from Web, Samsung Fun Club. After selecting an item on the list, pressing the Menu soft key allows you to erase the selected item or all of the items at one time. 102 103 Settings Many different features of your phone can be customized to suit your preferences. Sounds (Menu 6-1) You can use this menu to customize various sound settings, such as the:
ringer volume. key tone and voice volume. alert sounds. tone which sounds when the phone is switched on or off. Ringer Volume (Menu 6-1-1) This menu option allows you to adjust the ringer volume for the following items:
Calls: allows you to adjust the ringer volume for the incoming calls. Note: You can adjust the volume using the volume keys on the left side of the phone in the standby mode. Messages: allows you to adjust the ringer volume for incoming messages. Alarm/Scheduler: allows you to adjust the ringer volume for an alarm. SSeettttiinnggss Press the navigation keys to adjust the volume level or select the type. The following options are available:. Silent: The phone does not sound a ring. 1 Beep: The phone sounds a beep. Vibrate: The phone switches to the vibration mode. An incoming call vibrates the phone. Level 1 ~ 5: You can adjust the volume level. The graphic shows the volume level; the more bars, the louder the volume. Key Tone (Menu 6-1-2) This option allows you to set up the tone that the keypad generates each time you press a key. The following setting options are available:
Tone Volume: allows you to adjust the volume. The graphic shows the volume level; the more bars, the louder the volume. To turn the key tone off, select Silent. Tone Type: allows you to select the type of key tone. Raindrop Sound, Drum Sound, Piano, Womans Voice, Girls Voice and Beep are available. 104 105 SSeettttiinnggss Voice Volume (Menu 6-1-4) This option enables you to adjust the voice volume of the earpiece. Press the navigation keys to adjust the volume. You can also use the volume keys on the left side of the phone. The graphic shows the volume level; the more bars you see, the louder the volume. Note: During a call, you can adjust the volume using the volume keys on the left side of the phone. Power On/Off (Menu 6-1-5) This option allows you to select one of the sounds that the phone generates when it is switched on and off. SSeettttiinnggss Alerts (Menu 6-1-3) Your phone gives audible alerts (beeps) at a specified time to inform you that certain things have happened. The alerts only occur in your earpiece so the other party does not hear them. The available alerts are:
Minute Beep: When this menu option is set to On, the phone sounds an alert 10 seconds before each elapsed minute to remind you of the length of the current call. Service Area: When this menu option is set to On, the phone sounds an alert when you exit your service area or when you return to the service area. Connect: When this menu option is set to On, the phone sounds a connect tone when your call is connected to the system. Disconnect: When this menu option is set to On, the phone sounds a disconnect tone when a call is disconnected. Fade: When this menu option is set to On, the phone sounds an alert when a dropped call occurs during conversation in response to a signal fade. Roam Area: With this menu option set to On, the phone sounds an alert when your phone starts roaming. Folder: With this option set to On, the phone sounds an alert when you open or close the phones folder. 106 107 SSeettttiinnggss Display (Menu 6-2) The Display feature enables you to:
set a banner message set the length of time for the backlight change the display language. set the current date and time. set the external clock type. turn the service light on or off. Banner (Menu 6-2-1) This option allows you to set a banner message to be displayed at the bottom of the display in the standby mode. To change the banner:
1. If necessary, press to clear the old message. 2. Enter a new banner message using the alphanumeric keys. For more information entering text, see page 41. 3. When you finish entering the message, press the OK soft key to save it. SSeettttiinnggss Backlight (Menu 6-2-2) You have several options for setting how the LCD backlight operates. When the folder is closed, the backlight remains off, thus conserving battery power. When the folder is open, the length of time that the backlight remains on can be set as explained below. Remember that backlight use drains your battery faster. The following options are available:
7/15/30/40 Seconds: The backlight remains on for 7/15/30/40 seconds after the last key is pressed or you open the folder. Then it starts dimming and turns off after 53/45/30/20 seconds. Language (Menu 6-2-3) You can change the language of the menu display. Select either English or Chinese. 108 109 SSeettttiinnggss Set Time (Menu 6-2-4) This menu option allows you to set the current date and time. The following options are available:
Main Clock The current time, if set, displays. In a service area, you dont need to change the time setting. 1. Enter the current time and date. The month, day, hour and minute must each be entered using 2 digits and the year requires all four digits. You need to enter the hour in 24-hour format. 2. When you finish entering the time and date, press the Save soft key to save it. Dual Clock This option allows you to set the dual clock for the Wallpaper display (Menu 5-2-3). To change the option, move to the first level until it highlights using or key. Press or to scroll through the following options:
Location: Select Left or Right by pressing or and press or to select the location. Summer Time: Select Left or Right by pressing or and press or to select On or Off. SSeettttiinnggss Service LED (Menu 6-2-5) You can turn on or off the service light on the folder. Contrast (Menu 6-2-6) This menu allows you to adjust the brightness of the LCD screens. 1. Press down or left navigation key to make the screen darker, and up or right navigation key to make the screen brighter. You can also use the volume keys to adjust the brightness. Each time you press the key, you will see the selected status of the LCD. 2. Press the Select soft key to save your setting. Auto Retry (Menu 6-3) When this menu option turns on, your phone automatically dials the number when a connection fails.Depending upon your location, the number of times your phone automatically dials the number may be different. 110 111 SSeettttiinnggss SSeettttiinnggss Auto Answer (Menu 6-4) Roam Option (Menu 6-6) This feature is only used when the phone is connected to the ear-microphone. With this menu option activated, the phone automatically answers calls after predefined rings. This option is useful while driving, for instance. To activate this feature, you can set how long your phone waits before answering an incoming call. Select one from after 5 seconds, after 3 seconds and after 1 second. When this menu option is set to Off, the phone does not answer a call. If you do not answer the call, it is stored in the Missed call log; see page 62. Answer Mode (Menu 6-5) This menu option allows you to select how to answer an incoming call. It is preset to By Send Key. The following options are available:
By Send Key: The phone answers only when you press . By Folder Open: The phone answers when you open the folder. When the folder is already open, press . By Any Key: When folder is opened, you can press any key except for , , or the volume keys on the side of the phone. When the folder is closed, you can answer the call by opening the folder. Roaming is a feature which is only relevant in areas where there are at least two cellular service providers having valid roaming agreements. Roaming allows you to register your phone on one of the networks, but use the facilities of the other if your own network is not available. This system priority feature allows you to program your phone for optimum operation within or outside your home service area. You should always check your phones display because it will let you know when youre outside the service provider network and whether your phone is operating in another network; the roaming icon (
appears.
) You have the following options which allows you to control the phones roaming ability:
Home only: With this setting, you cannot roam. If your home system is not available, your call will not be connected and the No Service indicator (
) is displayed. Automatic: Your phone automatically search for a first available one of all types of service according to the Preferred Roaming List supplied by the service provider. 112 113 SSeettttiinnggss Security (Menu 6-7) Your phone provides you with various security options, including a user-programmable lock code and emergency number features. To access the Security menu, you must enter the 4-
digit lock code. It is preset to 0000 at the factory. Lock Mode (Menu 6-7-1) In the lock mode, you cannot dial numbers, except for making an emergency call, or accessing menu options. The phone can receive incoming calls and messages, even though the phone is in the lock mode. The following options are available:
Never: the phone remains unlocked. On power up: the phone is automatically locked the next time you turn the phone on. Now: the phone is immediately locked. To place an emergency call in the lock mode, enter a programmed number and then press
. The phone recognizes standard emergency numbers, such as 119, or three numbers programmed in the Emergency # menu option (Menu 6-7-3); see page 115. To unlock the phone, press the Unlock soft key and enter the 4-digit lock code. The phone is immediately unlocked. SSeettttiinnggss Change Lock (Menu 6-7-2) This feature allows you to change your current lock code to a new one. The lock code is preset to 0000 at the factory. Enter a new, four-digit lock code and enter the code once again at the prompt. Note: Your phone does not allow viewing of the lock code for security reasons, so be sure to write the lock code down or memorize it if you have changed Emergency # (Menu 6-7-3) Your phone provides the option of storing three emergency numbers. All of these numbers can be manually dialed at any time, even if your phone is locked or all outgoing calls are restricted. IMPORTANT NOTICE!
Emergency calling may not be available on all wireless networks at all times, due to the various transmission methods, network parameters and user settings used to complete a call from your wireless phone. A connection cannot always be guaranteed. DO NOT depend on this phone as a primary method of dialing 119 or for any other essential or emergency communications. Remember to always turn your phone on and check for the adequate signal strength before placing a call. 114 115 SSeettttiinnggss SSeettttiinnggss To store a emergency number:
1. Press or to select the desired location and press the Select soft key. 2. Press to clear the existing number. 3. Enter the desired number and press the Save soft key to save the number. Note: 119, 110 and 120 will remain as emergency numbers, even if you change them in the emergency number list. To make an emergency call in the lock mode, simply enter one of the programmed emergency numbers and press
. Voice Privacy (Menu 6-7-4) Used only in digital networks, Voice Privacy encrypts the voice channel so that people cannot eavesdrop on your conversation. The following options are available:
Standard: The phone uses a standard line for calls. Enhanced: The phone makes and receives calls on an encrypted high security line. Note: This feature may not be available in all areas. Contact your service provider for details and availability. Restriction (Menu 6-7-5) This feature allows you to restrict the use of your phone. The following options are available:
Outgoing: restricts outgoing calls from your phone except emergency calls by standard emergency numbers, such as 119, 110 and 120, or three programmed numbers in Emergency # (Menu 6-7-
3). Once you restricted the phone, storing a number is also unavailable. Incoming: restricts incoming calls. Phonebook: restricts to access your Phonebook. You cannot also add a new entry. When a confirming message displays, select Yes to turn it on or No turn it off. Clear Memory (Menu 6-7-6) This menu allows you to erase your phonebook entries in the UIM card or phone memory. You can also erase all of the entries at one time. The following options are available:
Card: clears all of the entries stored in the card. Phone: clears all of the entries stored in the phone. All: clears all Phonebook entries. When a confirming message displays, select Yes to clear the memory or No to cancel your selection. 116 117 SSeettttiinnggss Reset Phone (Menu 6-7-7) Resetting the phone restores the default settings of all of user-selectable options. When a confirming message displays, select Yes and press the Select soft key to confirm. The phone reboots, turning itself off and then back on, and returns to the standby mode. Note: The UIM card and phone memory cannot be reset. Select No or press to cancel your selection. Card Setup (Menu 6-7-8) In this menu, you can use the options for the UIM card. PIN Check When this feature is enabled, you must enter the PIN assigned to your UIM card each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval. But emergency calls are available without the PIN code. Note: Before disabling the PIN Check feature, you must enter your PIN. SSeettttiinnggss Change PIN This feature allows you to change the PIN of the UIM card to a new one, provided that the PIN Check feature (Menu 6-7-8-1) is enabled. You must enter the current PIN before you can specify a new one. Enter a new PIN. UIM Lock When this feature is enable, your phone only works with the current UIM card. Once you have entered the lock code, you are asked to confirm it by entering it again. To unlock the UIM card, you must enter the UIM lock code. Entry Method (Menu 6-8) This option allows you to select the default text input mode. Select one of four input modes; T9 Word, ABC, Pinyin and Stroke. 118 119 SSeettttiinnggss Data Option (Menu 6-9) You may sometimes need to switch the network to another, according to the service status in your area. In this menu, you can select the network type you prefer. If the network is not available with the current setting, try again after changing the option. The following options are available:
Auto Selection: allows your phone to select an available data transmission type automatically. 1X Only: allows your phone to use only 1x type. 95A Only: allows your phone to use only 95A type. 120 U-Max This menu is supplied by your service provider. The contents available in each menu option may be different depending on the service provider. For further details, contact your service provider. You can quickly access this menu by pressing the in the standby mode. key While using these feature, you can see the commands on the bottom line of the display. The function changes depending on where you are in the connected application.
, , or are used to execute the commands indicated by the text above them. U-Info (Menu 7-1) Your phone comes equipped with a web browser which makes it possible for you to access the Wireless Web. Each time you start the browser, the phone will connect to the Wireless Web and the service icon (
) will appear on the display. Any time the icon is visible on the display, you are connected to the Wireless Web and will be billed accordingly. Rates will vary according to your service plan. Launching the Web Browser Note: The first time you use the web browser, you will go through a security setup process that takes 3 to 5 minutes. Please follow the on- screen prompts to complete the security setup process. This initial setup process occurs only the first time you access the service. 121 UU--MMaaxx 1. When you are connected to the network, the home page or the last page you visited is displayed. The home page content when accessing the web browser differ according to your Wireless Web service provider. 2. To scroll through the screen, use and . Exiting the Web Browser To exit the Web Browser, simply press at any time. U-Magic (Menu 7-2) In this menu, you can use various Brew applications. The contents displayed in this menu may be different depending on the service plan of your service provider. Select an option using or and press the key. For further details, contact your service provider. UNI-INFO (Menu 7-3) This menu is available only when you use a UIM UITK card that provides additional services. For further details, see your UIM UTK card instructions. Health and Safety Information Battery Safety Information about batteries Type Time Talk time Standard Battery
(800 mA) up to 155 minutes Standby time 65 to 125 hours
(fully charged battery)
* Criterion for Measuring Time:
The Talk time is measured with the +10dBm, Voice Rate Half. Standby time will be reduced in the following conditions:
When you use the additional features on your phone such as writing and storing messages, playing games, connecting to the Internet, and so on. If you are frequently out of the service area. If you are out of the service area for a long period of time. If you use the phone out of the networks local service area. If you use the talk mode repeatedly. 122 123 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the operation time for both talk mode and standby mode is reduced by about half, it is time to buy a new battery. Precautions When Using Batteries Never use any charger or battery that is damaged in any way. Use the battery only for its intended purpose. If you use the phone near the networks base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. If left unused, a fully charged battery will discharge itself over time. Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Extreme temperature will affect the charging capacity of your battery: it may require cooling or warming first. Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 C (32 F). Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting. Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. 124 125 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips. 1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous. 5. Do not take notes or look up phone numbers while driving. Jotting down a To Do List or flipping through your Phonebook takes your attention away from your primary responsibility, driving safely. 6. Dial sensibly and access the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you. 126 127 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn 10. Call roadside assistance or a special non-
emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-
emergency wireless number. Operating Environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its users guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers:
Should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on Should not carry the phone in a breast pocket Should use the ear opposite the pacemaker to minimize potential interference If you have any reason to suspect that interference is taking place, switch off your phone immediately. 128 129 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch off your phone in any facility where posted notices require you to do so. Potentially Explosive Atmospheres Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone while at a refuelling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. 130 131 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call:
1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location (for example, 119 or any other official emergency number). Emergency numbers vary by location. 3. Press the key. If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so. Other Important Safety Information Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch off your phone before boarding an aircraft. The use of wireless phones in aircraft may be dangerous to the operation of the aircraft, and is illegal. Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both. 132 133 HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-
water solution. Do not paint the phone. Paint can clog the devices moving parts and prevent proper operation. Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated. Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices. If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. Keep the phone and all its parts and accessories out of the reach of small childrens. Keep the phone dry. Precipitation, humidity and liquids contain minerals will corrode electronic circuits. Do not touch the phone with a wet hand while it is charging. Doing so may cause an electric shock to you or damage to the phone. Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. Do not store the phone in hot areas. High temperature can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phones electronic circuit boards. Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. 134 135 Glossary Air time - Actual time spent talking on the wireless phone. Most carriers bill customers based on how many minutes of airtime they use each month. Antenna - A device for transmitting or receiving signals. The size and shape of antennas is determined, in part, by the frequency of the signal they receive. Wireless phones and the base station must have antennas. Base Station - The fixed radio transmitter/receiver that maintains communications with mobile radio telephones within a given area. (Typically called a cell or cell site) CDMA - (Code Division Multiple Access) A spread-
spectrum approach to digital transmission. With CDMA, each conversion is digitized and then tagged with a code. The mobile phone deciphers only a particular code to pick the right conversation off the air. The transmitted signal is just above noise level across the available bandwidth. Channel - Communications signals transmit along paths called channels. Codec Coder/Decorder - Compression &
decompression. Deactivation - The process of rendering a wireless phone inactive. GGlloossssaarryy DTMF - (Dual-Tone Multi- Frequency ) You send DTMF signals when you enter numbers by pressing the digit keys. EVRC - (Enhanced Variable Rate Codec) EVRC is a new global standard for compressing and decompressing voice signals. EVRC uses a lower bit rate (the number of bits sent per second) than existing CDMA vocoders, while providing significant improvements in voice quality. This technology enables your phone to provide superb voice quality while benefiting from the ability to process more cellular voice calls using less bandwidth than the voice codecs in CDMA networks today. Frequency - A measure based on time, as one or more waves per second, in an electrical or light wave information signal. A signals frequency is stated in cycles-per-second or Hertz (Hz). LCD - (Liquid Crystal Display) Commonly used to refer to the screen display on the wireless phone. Prepend - The addition of a prefix, such as an area code, to a phone number. 136 137 GGlloossssaarryy RF - Radio Frequency Roaming - The ability to use a wireless phone to make and receive calls in places outside of the home service area. Service Charge - The amount paid each month to receive wireless service. Standby Time - The amount of time a fully charged wireless portable or transportable phone can be on and idle without being in use. (See Talk Time) Talk Time - The length of time a person can talk on a portable or transportable wireless phone without recharging the battery. Vocoder - Voice Coder. A device used to convert speech into digital signals. Wireless - Radio-based Systems that allow transmission of telephone or data signals through the air without a physical connection, such as a metal wire (copper) or fiber optic cable. 138 R e d a i l t h e l a s t c a l l t w i c e s i l e n t m o d e S w i t c h t o t h e H o d l
i n t h e s t a n d b y m o d e
) l v o u m e j A d u s t v o i c e j A d u s t r i n g e r l v o u m e f o r c a l l s
o n t h e l e f t s i d e
d u r i n g a c o n v e r s a t i o n
o n t h e l e f t s i d e
i n t h e s t a n d b y m o d e
) R e c e i v e a c a l l o r O p e n t h e p h o n e E n d a c a l l M a k e a c a l l P h o n e n u m b e r
m e m o r y n u m b e r i n t o S t o r e a n e w
P h o n e
C a r d S p e e d d i a l L o c a t i o n n u m b e r
h o l d d o w n t h e l a s t d g i t
. i L o c a t i o n n u m b e r
h o d l
I n t h e p h o n e s m e m o r y P h o n e n u m b e r
N a m e
T y p e
P h o n e n u m b e r
I n t h e U M I c a r d
N a m e I B A S C O P E R A T I O N I N T E R N A L P H O N E B O O K S C H
X 6 0 9 Q u i c k R e f e r e n c e C a r d s u t a t S y r o m e M
x o B c i s u M x o B e g a m
I
x o B n u F
s e m a G
1 2 3 4 5 r e w s n A o t u A y r t e R o t u A e d o M r e w s n A n o i t p O m a o R d o h t e M y r t n E n o i t p O a t a D y t i r u c e S l s d n u o S y a p s i D c i g a M
U o f n I
U O F N I
I N U
1 2 3 4 5 6 7 8 9
1 2 3 t n e m n a t r e t n E i
5 s g n i t t e S
6 X A M
U
7 g n i t i a W d r a w r o F l l l l a C a C s g o L e s a r E e m T i r i A i i g n m o c n g n o g t u O d e s s i M
I
d d A d n i F
e g a s s e M w e N l s g s M e s a r E p u t e S g s M t r e A b e W x o b t u O x o b n
e n o h P y M t e S p u o r G
I
1 2 3 4 5 6 7 1 2 3 4 1 2 3 4 5 6 e t a D o T p m u J h t n o M w e V i l t e S m r a A r o t a u c l a C l d a P t s i L y a d o T o D o T o m e M n w o d t n u o C e m T i d l r o W
1 2 3 4 5 6 7 8 9 k o o b e n o h P
2 e g a s s e M
3 r e l u d e h c S
4 s l l a C
1 Licensed by QUALCOMM Incorporated under one or more of the following Patents. U.S Patent No. 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 E E R T U N E M
) s s e r p
, s s e c c a o T
u n e M n a M i
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-12-15 | 824.7 ~ 848.31 | TNE - Licensed Non-Broadcast Transmitter Held to Ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-12-15
|
||||
1 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027908797
|
||||
1 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 |
Pine Brook, New Jersey 07058
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
A3L
|
||||
1 | Equipment Product Code |
SCHX601
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** C****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
973-8********
|
||||
1 | Fax Number |
973-8********
|
||||
1 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R****** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNE - Licensed Non-Broadcast Transmitter Held to Ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Single-Mode Cellular Phone (CDMA) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output is ERP. SAR compliance for body-worn operating configuration is based on a separation distance of 1.5 cm between the back of the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters may not contain metallic components. The highest reported SAR values are Head: 1.42 W/kg: Body-worn: 1.39 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SAMSUNG ELECTRONICS CO., LTD.
|
||||
1 | Name |
N****** P****
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
n******@samsung.co..kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.70000000 | 848.31000000 | 0.3110000 | 2.5000000000 ppm | 1M25F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC