all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 5.03 MiB | February 20 2022 / August 22 2022 | delayed release | ||
1 2 |
|
Internal Photos | Internal Photos | 1.10 MiB | February 19 2022 / August 22 2022 | delayed release | ||
1 2 |
|
External Photos | External Photos | 270.83 KiB | February 19 2022 / August 22 2022 | delayed release | ||
1 2 | ID Label/Location Info | February 21 2022 / February 23 2022 | ||||||
1 2 |
|
Authorization Letter | Cover Letter(s) | 116.23 KiB | February 19 2022 / February 23 2022 | |||
1 2 | Block Diagram | Block Diagram | February 19 2022 | confidential | ||||
1 2 | Circuit diagram | Schematics | February 19 2022 | confidential | ||||
1 2 | Cover Letter(s) | February 19 2022 / February 23 2022 | ||||||
1 2 | Cover Letter(s) | February 19 2022 / February 23 2022 | ||||||
1 2 | Cover Letter(s) | February 19 2022 / February 23 2022 | ||||||
1 2 | Operational Description | Operational Description | February 19 2022 | confidential | ||||
1 2 | RF Exposure Info | February 21 2022 / February 23 2022 | ||||||
1 2 |
|
Setup Photos | Test Setup Photos | 405.46 KiB | February 19 2022 / August 22 2022 | delayed release | ||
1 2 |
|
Test Report | Test Report | 2.28 MiB | February 21 2022 / February 23 2022 |
1 2 | Users Manual | Users Manual | 5.03 MiB | February 20 2022 / August 22 2022 | delayed release |
USER MANUAL MX-ST50B SAFETY INFORMATION SAFETY WARNINGS WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product has included important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). AC voltage : Rated voltage marked with this symbol is AC voltage. DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use :
This symbol instructs the user to consult the user manual for further safety related information. CAUTION Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A):
FCC Suppliers Declaration of Conformity Responsible Party - U.S. Contact Information:
Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864) FCC Compliance Statement :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution :
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. Class B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. Connecting the equipment to an outlet that is on a different circuit than the radio or TV. Consulting the dealer or an experienced radio/TV technician for help. ENG - ii ENG - iii SAFETY INFORMATION WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A):
FCC Suppliers Declaration of Conformity Responsible Party - U.S. Contact Information:
Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864) FCC Compliance Statement :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENG - ii FCC Caution :
FCC Radiation Exposure Statement :
Any changes or modifications not expressly This equipment complies with FCC radiation approved by the party responsible for exposure limits set forth for an uncontrolled compliance could void the users authority to environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) This product satisfies FCC regulations when between the radiator and your body. This device shielded cables and connectors are used to and its antenna(s) must not be co-located or connect the unit to other equipment. operated in conjunction with any other antenna or To prevent electromagnetic interference with transmitter. electric appliances, such as radios and televisions, use shielded cables and CALIFORNIA USA ONLY (Applicable for connectors for connections. networking models only.) Class B FCC Statement This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the This equipment has been tested and found to product sold or distributed ONLY in California comply with the limits for a Class B digital device, USA Perchlorate Material - special handling may pursuant to Part 15 of the FCC Rules. These limits apply, See www.dtsc.ca.gov/hazardouswaste/
are designed to provide reasonable protection perchlorate. against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/
recycling Or call, 1800SAMSUNG WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. cause harmful interference to radio or television Important Safety Instructions reception, which can be determined by turning Read these operating instructions carefully the equipment off and on, the user is encouraged before using the unit. Follow all the safety to try to correct the interference by one of the instructions listed below. Keep these operating following measures:
Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. Connecting the equipment to an outlet that is 5. Do not use this apparatus near water. on a different circuit than the radio or TV. 6. Clean only with dry cloth. Consulting the dealer or an experienced 7. Do not block any ventilation openings. radio/TV technician for help. Install in accordance with the manufacturers instructions. ENG - iii 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other To avoid deterioration of waterproof Check the following and use the unit correctly. apparatus (including amplifiers) that produce Deformation or damage from dropping the heat. unit or subjecting it to mechanical shock may 9. Do not defeat the safety purpose of the cause deterioration of the waterproof. polarized or grounding-type plug. This unit does not have a design that is A polarized plug has two blades with one resistant to water pressure. Use of the unit in wider than the other. A grounding type plug a location where high water pressure is has two blades and a third grounding prong. applied, such as in the shower, may cause a The wide blade or the third prong are malfunction. provided for your safety. If the provided plug Do not pour high-temperature water or blow does not fit into your outlet, consult an hot air from a hair dryer or any other electrician for replacement of the obsolete applicance on the unit directly. Also never use outlet. the unit in a place subject to high 10. Protect the power cord from being walked temperatures, such as in a sauna or near a on or pinched particularly at plugs, heat source. convenience receptacles, and the point Handle the cap with care. Port cover and AC where they exit from the apparatus. plug cover plays a very important role in 11. Only use attachments/accessories specified maintenance of the waterproof and dust by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. proof performance. When using the unit, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the waterproof and dust proof When a cart is used, use caution when performance may deteriorate and may cause moving the cart/apparatus combination to a malfunction of the unit as a result of water avoid injury from tip-over. or dust particles entering the unit. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the rear of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. 3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. CAUTION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. ENG - iv ENG - v Others Do not use or leave the unit in an extremely cold or hot environment (temperature outside the range 5 C - 35 C). If the unit is used or left in outside the above range, the unit may automatically stop to protect internal circuitry. At high temperature, the charging may stop or the volume may reduce to protect the battery. Even if you do not intend to use the unit for a long time, charge the battery to its full capacity once every 6 months to maintain its performance. To avoid deterioration of waterproof Check the following and use the unit correctly. Deformation or damage from dropping the unit or subjecting it to mechanical shock may cause deterioration of the waterproof. This unit does not have a design that is resistant to water pressure. Use of the unit in a location where high water pressure is applied, such as in the shower, may cause a malfunction. Do not pour high-temperature water or blow hot air from a hair dryer or any other applicance on the unit directly. Also never use the unit in a place subject to high temperatures, such as in a sauna or near a heat source. Handle the cap with care. Port cover and AC plug cover plays a very important role in maintenance of the waterproof and dust proof performance. When using the unit, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the waterproof and dust proof performance may deteriorate and may cause a malfunction of the unit as a result of water or dust particles entering the unit. PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the rear of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. 3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. CAUTION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. ENG - iv ENG - v ABOUT THIS MANUAL CONTENTS The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. 01 Checking the Components USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.
(https://www.samsung.com/us/support/downloads/) Design and specifications are subject to change without prior notice. Sound Tower is a new name for Giga Party Audio. Inserting Batteries before using the Remote Control
(AAA batteries X 2)
------------------------- 2 02 Product Overview Top Panel of the Sound Tower Rear Panel of the Sound Tower 03 Connecting the Sound Tower Connecting Electrical Power How to use Audio Group 04 Connecting an External Device Connecting using an Analog Audio (AUX) Cable Connecting a mobile device via Bluetooth Connecting the Samsung TV via Bluetooth 05 Connecting a USB Storage Device Software Update
------------------------- 17 06 Using the Remote Control How to Use the Remote Control
------------------------- 18
------------------------- 3
------------------------- 4
------------------------- 5
------------------------- 6
------------------------- 12
------------------------- 13
------------------------- 16 2 3 5 12 17 18 ENG - vi ENG - vii ABOUT THIS MANUAL CONTENTS The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. 01 Checking the Components 2 USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.
(https://www.samsung.com/us/support/downloads/) Design and specifications are subject to change without prior notice. Sound Tower is a new name for Giga Party Audio. Inserting Batteries before using the Remote Control
(AAA batteries X 2) 02 Product Overview Top Panel of the Sound Tower Rear Panel of the Sound Tower 03 Connecting the Sound Tower Connecting Electrical Power How to use Audio Group 04 Connecting an External Device Connecting using an Analog Audio (AUX) Cable Connecting a mobile device via Bluetooth Connecting the Samsung TV via Bluetooth 05 Connecting a USB Storage Device Software Update 06 Using the Remote Control
------------------------- 2 3
------------------------- 3
------------------------- 4 5
------------------------- 5
------------------------- 6 12
------------------------- 12
------------------------- 13
------------------------- 16 17
------------------------- 17 18 How to Use the Remote Control
------------------------- 18 ENG - vi ENG - vii 07 Troubleshooting 08 License 09 Open Source License Notice 10 Important Notes About Service 11 Specifications and Guide 20 21 22 22 23 Specifications
------------------------- 23 ENG - viii 01 CHECKING THE COMPONENTS 02 PRODUCT OVERVIEW Sound Tower Main Unit Remote Control (AH81-11472A) /
Batteries Power Cord
(AH81-11474A) For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Sound Tower Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. When moving the product, do not drag or pull the product from the ground. Lift the product when moving the product. Inserting Batteries before using the Remote Control
(AAA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. Top Panel of the Sound Tower
BASS
Remote Sensor the remote sensor. When operating the Sound Tower system, please aim the front of the remote control at Displays operating messages or current status of the Sound Tower system. You also need to add a description of these five lamp effects
Display Window
BT USB AUX1 AUX2 Power Power Turns the Sound Tower on and off. Light Press the
(Light) button to turn the Lighting Mode on.
Source Press and hold the
(Source) button for more than 5 seconds to enter the Press to select a source connected to the Sound Tower. SEARCHING TV mode. Play/Pause Press the button to pause a music file temporarily. When you press the button again, the music file plays.
Play/Pause Demo play Press and hold the button for more than 5 seconds to start the Demo play while the system is turned on. No VFD display, 5 LEDS flashing simultaneously and it plays demo music for 60 seconds. Please be careful as it may play louder than the set volume.
Volume down
Volume up
Press the
(Volume down) button to lower the volume. Press the
(Volume up) button to raise the volume. BASS Press the BASS button to use the powerful bass sound. ENG - 2 ENG - 3 01 CHECKING THE COMPONENTS 02 PRODUCT OVERVIEW Sound Tower Main Unit Remote Control (AH81-11472A) /
Batteries Power Cord
(AH81-11474A) For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Sound Tower Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or When moving the product, do not drag or pull the product from the ground. Lift the product when Samsung Customer Care. moving the product. Inserting Batteries before using the Remote Control
(AAA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. Top Panel of the Sound Tower
BASS
Remote Sensor When operating the Sound Tower system, please aim the front of the remote control at the remote sensor. Displays operating messages or current status of the Sound Tower system. You also need to add a description of these five lamp effects
Display Window BT USB AUX1 AUX2 Power Power Turns the Sound Tower on and off. Light Press the
(Light) button to turn the Lighting Mode on.
Source Press to select a source connected to the Sound Tower. Press and hold the SEARCHING TV mode.
(Source) button for more than 5 seconds to enter the
Play/Pause Play/Pause button to pause a music file temporarily. Press the When you press the button again, the music file plays. Demo play Press and hold the button for more than 5 seconds to start the Demo play while the system is turned on. No VFD display, 5 LEDS flashing simultaneously and it plays demo music for 60 seconds. Please be careful as it may play louder than the set volume.
Volume down
Volume up Press the
(Volume down) button to lower the volume. Press the
(Volume up) button to raise the volume.
BASS Press the BASS button to use the powerful bass sound. ENG - 2 ENG - 3 Rear Panel of the Sound Tower 03 CONNECTING THE SOUND TOWER
AUX 1 MIC VOL ECHO USB
(5V 2.1A) Use the power cord to connect the Sound Tower to an electrical outlet in the following order:
AUX 1 MIC VOL ECHO USB
(5V 2.1A) Connect the power cord to the Sound Tower and then to a wall socket.
See the illustrations below. For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Sound Tower) Connecting Electrical Power POWER
Press the green and blue. PAIRING button to enter the without VFD, the third LED alternates red, Press the ADD STEREO button to connect to another Sound Tower wirelessly. AUX 1 MIC VOL ECHO USB
(5V 2.1A) Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly. POWER Connect a USB device to the USB ports on the main unit. If you connect your cell phone to the USB port, you can charge it.
(Source) button to select USB. Press the You can give an echo effect to the sound from a connected microphone (MIC) by adjusting the ECHO knob. Use the VOL knob to adjust the volume of a connected microphone (MIC). Connect your microphone to the MIC jack. Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main unit to Audio In on an external analog output device. Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to Audio Out on an external analog output device. Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio Out on an external device. Connect the power cord to the Power jack and connect the other end of the power cord to a wall socket to supply electrical power to the Sound Tower.
Bluetooth PAIRING
ADD STEREO
GROUP PLAY
USB ECHO VOL MIC GROUP PLAY OUT Terminals AUX2/GROUP PLAY IN Terminals AUX1 Power Rear of Sound Tower Connecting Electrical Power ENG - 4 ENG - 5 Rear Panel of the Sound Tower 03 CONNECTING THE SOUND TOWER
AUX 1 MIC VOL ECHO USB
(5V 2.1A) Use the power cord to connect the Sound Tower to an electrical outlet in the following order:
AUX 1 MIC VOL ECHO USB
(5V 2.1A) Connect the power cord to the Sound Tower and then to a wall socket.
See the illustrations below. For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Sound Tower) Connecting Electrical Power POWER
Press the PAIRING button to enter the without VFD, the third LED alternates red, green and blue. Press the ADD STEREO button to connect to another Sound Tower wirelessly. AUX 1 MIC VOL ECHO USB
(5V 2.1A) Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly. POWER Connect a USB device to the USB ports on the main unit. USB If you connect your cell phone to the USB port, you can charge it. Press the
(Source) button to select USB. Rear of Sound Tower Connecting Electrical Power
Bluetooth PAIRING
ADD STEREO
GROUP PLAY
ECHO VOL MIC GROUP PLAY OUT Terminals AUX2/GROUP PLAY IN Terminals AUX1 Power You can give an echo effect to the sound from a connected microphone (MIC) by adjusting the ECHO knob. Use the VOL knob to adjust the volume of a connected microphone (MIC). Connect your microphone to the MIC jack. Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main unit to Audio In on an external analog output device. Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to Audio Out on an external analog output device. Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio Out on an external device. Connect the power cord to the Power jack and connect the other end of the power cord to a wall socket to supply electrical power to the Sound Tower. ENG - 4 ENG - 5 How to use Audio Group You can connect multiple audio systems in a group to create a party environment and produce higher sound output. Set one Sound Tower as the HOST and any music played on it will be shared among any other Sound Tower systems in the Audio group. Connecting the wired Group Play mode Connecting the wireless Group Play mode You can connect up to ten Sound Tower systems with the wireless Group Play function.
Continue the connection until the last Sound Tower 1st Sound Tower HOST 2nd Sound Tower Last Sound Tower Set up Group Play by connecting all the systems using audio cables (not supplied). Use the AUX or
(Source) button to change the source to AUX2 for every Sound Tower system except the 1st (or HOST) Sound Tower system. NOTES The 1st Sound Tower HOST can play music from any source. Depending on the length or characteristics of the cable, there may be a difference in operating distance. If Sound Tower is connected with Samsung TV, Wireless Group Play is not available. The wireless Group Play connection is available for any Sound Tower system. Environmental conditions or other factors with connected devices may have effect on playback SUB 1 SUB 2 HOST 1. Press the GROUP PLAY button on the HOST Sound Tower system. The HOST message appears on the display of the HOST Sound Tower and the LED blinks on the GROUP PLAY button. 2. Press the GROUP PLAY button on the 2nd Sound Tower system (SUB 1). The GROUP PLAY button on both systems stops blinking. 3. Press the GROUP PLAY button on the 3rd Sound Tower system (SUB 2). No VFD display, voice prompt instead the GROUP PLAY button on the system stops blinking. 4. If you want to add more Sound Tower systems, repeat step 3. 5. Play music on the HOST Sound Tower. Sound outputs from all the connected systems. NOTES quality. If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play The ADD STEREO button and PAIRING button on the SUB Sound Tower systems are not available The ADD STEREO button on the HOST Sound Tower system is not available while in wireless Group connection. Try step 1 to step 5 again. while in wireless Group Play mode. Play mode. When adding a SUB unit, if you press and hold GROUP PLAY on the SUB, before no VFD display, voice prompt instead message appears, it will become the HOST unit instead. ENG - 6 ENG - 7 How to use Audio Group You can connect multiple audio systems in a group to create a party environment and produce higher sound output. Set one Sound Tower as the HOST and any music played on it will be shared among any other Sound Tower systems in the Audio group. Connecting the wired Group Play mode Connecting the wireless Group Play mode You can connect up to ten Sound Tower systems with the wireless Group Play function.
Continue the connection until the last Sound Tower 1st 2nd Sound Tower HOST Sound Tower Last Sound Tower Set up Group Play by connecting all the systems using audio cables (not supplied). Use the AUX or
(Source) button to change the source to AUX2 for every Sound Tower system except the 1st (or HOST) Sound Tower system. NOTES distance. The 1st Sound Tower HOST can play music from any source. Depending on the length or characteristics of the cable, there may be a difference in operating SUB 1 SUB 2 HOST 1. Press the GROUP PLAY button on the HOST Sound Tower system. The HOST message appears on the display of the HOST Sound Tower and the LED blinks on the GROUP PLAY button. 2. Press the GROUP PLAY button on the 2nd Sound Tower system (SUB 1). The GROUP PLAY button on both systems stops blinking. 3. Press the GROUP PLAY button on the 3rd Sound Tower system (SUB 2). No VFD display, voice prompt instead the GROUP PLAY button on the system stops blinking. 4. If you want to add more Sound Tower systems, repeat step 3. 5. Play music on the HOST Sound Tower. Sound outputs from all the connected systems. NOTES If Sound Tower is connected with Samsung TV, Wireless Group Play is not available. The wireless Group Play connection is available for any Sound Tower system. Environmental conditions or other factors with connected devices may have effect on playback quality. If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play connection. Try step 1 to step 5 again. The ADD STEREO button and PAIRING button on the SUB Sound Tower systems are not available while in wireless Group Play mode. The ADD STEREO button on the HOST Sound Tower system is not available while in wireless Group Play mode. When adding a SUB unit, if you press and hold GROUP PLAY on the SUB, before no VFD display, voice prompt instead message appears, it will become the HOST unit instead. ENG - 6 ENG - 7 All SUB units must be connected one by one. For example, after HOST is connected, press GROUP Using a Smartphone and Stereo Group mode PLAY button on SUB 1 to connect, and after SUB 1 is connected, you should connect SUB 2 and SUB Connect two Sound Tower and use them with your smartphone to enjoy stereo sound. 3 one by one sequentially. While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth connection is disabled. Bluetooth devices can search and connect with the HOST Sound Tower only. When in Group Play mode, the SUB cannot connect to a Bluetooth device. If you power off and then power on the Sound Tower or select any source other than BT on a SUB unit, in Group Play mode, the Group Play mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (HOST or SUB) after Group Play is connected or press the GROUP PLAY button (HOST or SUB) before Group Play is connected. No VFD display, voice prompt instead and the LED above the GROUP PLAY button is off. 2. If you select any source other than BT on the SUB units or turn off the HOST Sound Tower, the Group Play mode is disconnected. If the disconnection is made from the HOST Sound Tower, Group Play is disconnected. LED Indications LED STATE Description 3. When the connection is made, no VFD display, voice prompt instead. Blink Solid Solid Waiting for a wireless Group Play connection. The wireless Group Play connection was successful. There is an error with the wireless Group Play connection. Green Red NOTE In wireless connection, Playback quality can be unstable depending on Bluetooth environment. NOTES For better play, please keep the device in wired Group Play mode.
Left Sound Tower Right Sound Tower
(MAIN)
(SUB) 1. Press the ADD STEREO button on the left Sound Tower system. The LED blinks on the ADD 2. Press the ADD STEREO button on the right Sound Tower system. The LED blinks on the ADD STEREO button. STEREO button. The MAIN Sound Tower system outputs left channel sound and the SUB Sound Tower system outputs right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to change the sound channel of the Sound Tower. 4. Play music by connecting your smartphone to the MAIN Sound Tower and Bluetooth. Sound is output from both Sound Tower. To use the Stereo Group mode, both Sound Tower systems must be the same model. Environmental conditions or other factors with connected devices may have effect on playback If the red LED is on the ADD STEREO, an error has occured in the Stereo Group connection. Try step Remote Controller, BT PAIRING, GROUP PLAY and
(Source) buttons on the SUB Sound Tower systems are disabled while in Stereo Group mode. The GROUP PLAY button on the MAIN Sound Tower system is not available while in Stereo Group quality. 1 and step 3 again. mode. ENG - 8 ENG - 9 While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth 3 one by one sequentially. connection is disabled. Bluetooth devices can search and connect with the HOST Sound Tower only. When in Group Play mode, the SUB cannot connect to a Bluetooth device. If you power off and then power on the Sound Tower or select any source other than BT on a SUB unit, in Group Play mode, the Group Play mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (HOST or SUB) after Group Play is connected or press the GROUP PLAY button (HOST or SUB) before Group Play is connected. No VFD display, voice prompt instead and the LED above the GROUP PLAY button is off. 2. If you select any source other than BT on the SUB units or turn off the HOST Sound Tower, the Group Play mode is disconnected. All SUB units must be connected one by one. For example, after HOST is connected, press GROUP Using a Smartphone and Stereo Group mode PLAY button on SUB 1 to connect, and after SUB 1 is connected, you should connect SUB 2 and SUB Connect two Sound Tower and use them with your smartphone to enjoy stereo sound.
Left Sound Tower
(MAIN) Right Sound Tower
(SUB) 1. Press the ADD STEREO button on the left Sound Tower system. The LED blinks on the ADD If the disconnection is made from the HOST Sound Tower, Group Play is disconnected. STEREO button. LED STATE Description 3. When the connection is made, no VFD display, voice prompt instead. 2. Press the ADD STEREO button on the right Sound Tower system. The LED blinks on the ADD STEREO button. Blink Solid Solid Waiting for a wireless Group Play connection. The wireless Group Play connection was successful. There is an error with the wireless Group Play connection. The MAIN Sound Tower system outputs left channel sound and the SUB Sound Tower system outputs right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to change the sound channel of the Sound Tower. 4. Play music by connecting your smartphone to the MAIN Sound Tower and Bluetooth. Sound is output from both Sound Tower. LED Indications Green Red NOTE In wireless connection, Playback quality can be unstable depending on Bluetooth environment. NOTES For better play, please keep the device in wired Group Play mode. To use the Stereo Group mode, both Sound Tower systems must be the same model. Environmental conditions or other factors with connected devices may have effect on playback quality. If the red LED is on the ADD STEREO, an error has occured in the Stereo Group connection. Try step 1 and step 3 again. Remote Controller, BT PAIRING, GROUP PLAY and
(Source) buttons on the SUB Sound Tower systems are disabled while in Stereo Group mode. The GROUP PLAY button on the MAIN Sound Tower system is not available while in Stereo Group mode. ENG - 8 ENG - 9 In mode other than BT (ex. USB, AUX mode), music is played only in MAIN Sound Tower and music 2. Connect the RCA cable to the AUX2 OUT on the MAIN and AUX2 IN on the SUB as shown by using is not played in SUB Sound Tower. the RCA cable (not supplied). The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary. 3. In BT mode, press the AUX button on the MAIN Sound Tower remote control for at least 5 The Bluetooth device has the same name as MAIN Sound Tower and SUB Sound Tower when seconds. LED indicator light flow display appears on the display. connected to the Bluetooth device, and only the MAIN Sound Tower can be connected. 4. When the connection is complete, the third LED flashes appears in the display and then the current This product does not support aptX audio stream with Stereo Group mode. output no VFD display, voice prompt instead. If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode 5. When the connection is complete, LED indicator light flow display message appears in the MAIN may fail. Terminate the Stereo Group mode Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is connected. No VFD display, voice prompt instead appears on the display and the LED above the ADD STEREO Sound Tower display and a SUB appears in the SUB Sound Tower display. The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to change the sound channel of the Sound Tower. 6. Connect a TV and MAIN Sound Tower via Bluetooth to play music. Sound is output from both button is off. LED Indications LED STATE Description Green Red Blink Solid Solid Waiting for a Stereo Group connection. The Stereo Group connection is successful. There is an error with the Stereo Group connection. Using Samsung TV and Stereo Group mode Connect two Sound Tower by wire and use them with Samsung TV to enjoy stereo sound. Sound Tower. NOTES To use Stereo Group mode, both Sound Tower must be the same model. A red light on the LED on the ADD STEREO button indicates an error in the Stereo Group In Stereo Group mode, the remote control, BT PAIRING, GROUP PLAY, and
(Source) buttons on connection. Try Step 1 to 5 again. the SUB Sound Tower are disabled. The GROUP PLAY button on the MAIN Sound Tower is not available in Stereo Group mode. If Samsung TV supports a simple connection, the connection pop-up is automatically displayed on the TV, and if you select Yes, it connects to the TV. If there is a previous connection history between Samsung TV and Sound Tower, it will be connected to Samsung TV without pop-up. For a simple connection to Samsung TV, refer to page 16. The lighting colors may vary between the MAIN Sound Tower and the SUB Sound Tower. When connecting to a TV, the names of the MAIN and SUB Sound Tower are the same in the Bluetooth list on the TV, and only the MAIN Sound Tower can be connected. Terminating the Stereo Group mode connection Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is connected. OFF-STEREO MODE appears in the display and the LED on the ADD STEREO button turns off. Left Sound Tower
(MAIN) Right Sound Tower
(SUB) 1. Refer to Using a Smartphone and Stereo Group mode to connect the two Sound Tower in a Stereo Group. ENG - 10 ENG - 11 In mode other than BT (ex. USB, AUX mode), music is played only in MAIN Sound Tower and music 2. Connect the RCA cable to the AUX2 OUT on the MAIN and AUX2 IN on the SUB as shown by using is not played in SUB Sound Tower. the RCA cable (not supplied). The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary. 3. In BT mode, press the AUX button on the MAIN Sound Tower remote control for at least 5 The Bluetooth device has the same name as MAIN Sound Tower and SUB Sound Tower when seconds. LED indicator light flow display appears on the display. connected to the Bluetooth device, and only the MAIN Sound Tower can be connected. 4. When the connection is complete, the third LED flashes appears in the display and then the current This product does not support aptX audio stream with Stereo Group mode. output no VFD display, voice prompt instead. If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode 5. When the connection is complete, LED indicator light flow display message appears in the MAIN Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is No VFD display, voice prompt instead appears on the display and the LED above the ADD STEREO may fail. Terminate the Stereo Group mode connected. button is off. LED Indications LED STATE Description Green Red Blink Solid Solid Waiting for a Stereo Group connection. The Stereo Group connection is successful. There is an error with the Stereo Group connection. Using Samsung TV and Stereo Group mode Connect two Sound Tower by wire and use them with Samsung TV to enjoy stereo sound. Sound Tower display and a SUB appears in the SUB Sound Tower display. The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to change the sound channel of the Sound Tower. 6. Connect a TV and MAIN Sound Tower via Bluetooth to play music. Sound is output from both Sound Tower. NOTES To use Stereo Group mode, both Sound Tower must be the same model. A red light on the LED on the ADD STEREO button indicates an error in the Stereo Group connection. Try Step 1 to 5 again. In Stereo Group mode, the remote control, BT PAIRING, GROUP PLAY, and
(Source) buttons on the SUB Sound Tower are disabled. The GROUP PLAY button on the MAIN Sound Tower is not available in Stereo Group mode. If Samsung TV supports a simple connection, the connection pop-up is automatically displayed on the TV, and if you select Yes, it connects to the TV. If there is a previous connection history between Samsung TV and Sound Tower, it will be connected to Samsung TV without pop-up. For a simple connection to Samsung TV, refer to page 16. The lighting colors may vary between the MAIN Sound Tower and the SUB Sound Tower. When connecting to a TV, the names of the MAIN and SUB Sound Tower are the same in the Bluetooth list on the TV, and only the MAIN Sound Tower can be connected. Terminating the Stereo Group mode connection Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is connected. OFF-STEREO MODE appears in the display and the LED on the ADD STEREO button turns off. Left Sound Tower Right Sound Tower
(MAIN)
(SUB) 1. Refer to Using a Smartphone and Stereo Group mode to connect the two Sound Tower in a Stereo Group. ENG - 10 ENG - 11 04 CONNECTING AN EXTERNAL DEVICE Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of Connect to an external device via a wired or wireless network to play the external devices sound cabling. through the Sound Tower. Connecting using an Analog Audio (AUX) Cable Mobile device / MP3 / PMP AUX 1 MIC VOL ECHO USB
(5V 2.1A) Bluetooth device OR LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP 0.14 inches (3.5 mm) stereo cable (not supplied)
Rear of the Sound Tower AUX 1
Audio (AUX) Cable (not supplied) R
- AUDIO -
L BD / DVD player / Set-top box / Game console
0.14 inches (3.5 mm) stereo Cable (AUX1) 1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an 0.14 inches (3.5 mm) stereo cable . 2. Select AUX1 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control.
Audio Cable (AUX2) 1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device using an audio cable . 2. Select AUX2 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control. The initial connection BT PAIRING mode. 1. Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the
(OR) Press the PAIRING button on the rear panel. 2. On your device, select [AV] MX-ST50B from the list that appears. After the device is connected, a third LED blinks 3. Play music files from the device connected via Bluetooth through the Sound Tower. If the device fails to connect Then repeat steps 1 and 2. If a previously connected Sound Tower listing (e.g. [AV] MX-ST50B) appears in the list, delete it. What is the difference between BT READY and BT PAIRING?
BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Sound Tower. BT PAIRING : In this mode, you can connect a new device to the Sound Tower.
(Press and hold the PAIRING button on the remote control for more than 5 seconds or press the PAIRING button on the rear of the Sound Tower to enter the BT PAIRING mode.) ENG - 12 ENG - 13 04 CONNECTING AN EXTERNAL DEVICE Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of Connect to an external device via a wired or wireless network to play the external devices sound cabling. through the Sound Tower. Connecting using an Analog Audio (AUX) Cable Mobile device / MP3 / PMP AUX 1 MIC VOL ECHO USB
(5V 2.1A) Bluetooth device OR LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP 0.14 inches (3.5 mm) stereo cable (not supplied)
Rear of the Sound Tower AUX 1
Audio (AUX) Cable (not supplied) R
- AUDIO -
L BD / DVD player / Set-top box / Game console
0.14 inches (3.5 mm) stereo Cable (AUX1) 1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an 0.14 inches (3.5 mm) stereo cable . 2. Select AUX1 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control.
Audio Cable (AUX2) using an audio cable . control. 1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device 2. Select AUX2 mode by pressing the
(Source) button on the top panel or on the remote You can also select a source using AUX button on the remote control. The initial connection 1. Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the BT PAIRING mode.
(OR) Press the PAIRING button on the rear panel. 2. On your device, select [AV] MX-ST50B from the list that appears. After the device is connected, a third LED blinks 3. Play music files from the device connected via Bluetooth through the Sound Tower. If the device fails to connect If a previously connected Sound Tower listing (e.g. [AV] MX-ST50B) appears in the list, delete it. Then repeat steps 1 and 2. What is the difference between BT READY and BT PAIRING?
BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Sound Tower. BT PAIRING : In this mode, you can connect a new device to the Sound Tower.
(Press and hold the PAIRING button on the remote control for more than 5 seconds or press the PAIRING button on the rear of the Sound Tower to enter the BT PAIRING mode.) ENG - 12 ENG - 13 Bluetooth Multi connection Sound Tower supports up-to two simultaneous Bluetooth device connections. Sound Tower can play music through one of the connected Bluetooth devices without disconnecting the second device. Bluetooth device 1 Bluetooth device 2 1. Connect Sound Tower to the first device and the second device respectively for the first time.
(See page 13) 2. Music can be played on only one of the two connected devices, and when the music is played on LED Indications the other device, the music on the playing device is paused. LED STATE Description NOTES If you want to connect Sound Tower to a third device, you can disconnect Sound Tower from one of the two currently connected devices and then connect Sound Tower to the third device. With the Sound Tower and two devices currently connected, when pairing to a new Bluetooth device, the devices currently connected maybe disconnected. You can connect to two Bluetooth devices at the same time. If asked for a PIN code when connecting a Bluetooth device, enter <0000>. turn it on. Environmental conditions or other factors with connected devices may have effect on playback quality. The Sound Tower automatically turns off after 20 minutes with no command input in the ready state. The Sound Tower may not perform Bluetooth search or connection correctly under the following circumstances:
If there is a strong electrical field around the Sound Tower. If several Bluetooth devices are simultaneously paired with the Sound Tower. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc. When the Sound Tower is connected to your TV by Bluetooth connection, the video on the TV and audio from the Sound Tower may not be synchronized because the distance between the Sound Tower and the TV is too far. It is recommended to move the Sound Tower closer to your TV within 3.3 ft (1 meter). When the speaker is in the Bluetooth Multi connection mode, you will need to connect the other Bluetooth device and speaker within a few minutes (Approx. 1 minute). Otherwise Bluetooth Multi Bluetooth Multi connection may not be supported depending on the connected devices Removable/detachable Bluetooth devices (Ex:Dongle etc..) ,windows phone, laptops, TV, etc. do not connection mode will be canceled. specifications. support Bluetooth Multi connection. depending on the Bluetooth devices. After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing If you move too far out of range from the Sound Tower without first disconnecting your Bluetooth device, it may take a few minutes to connect other Bluetooth devices. If you turn the Sound Tower off and back on, you can connect other Bluetooth devices without waiting. Fast Blink BT PAIRING mode Blue BT READY mode Blink Solid A Bluetooth device is connected. Using Bluetooth Power On When the Sound Tower is turned off, you can connect your smart device via a Bluetooth connection to 1. Press and hold the BASS button on the remote control or on the top panel to set the Bluetooth Power On function on. The third LED flashes. 2. When the Sound Tower is off, connect your smart device via Bluetooth. (For information on Bluetooth connections, refer to your smart devices manual.) 3. When the connection is complete, the Sound Tower turns itself on automatically in Bluetooth mode. NOTE Select the desired music to play from your smart device. Each time you press the BASS button, the Sound no display, just a state switch :
ON-BLUETOOTH POWER OFF-BLUETOOTH POWER ENG - 14 ENG - 15 When the speaker is in the Bluetooth Multi connection mode, you will need to connect the other Bluetooth device and speaker within a few minutes (Approx. 1 minute). Otherwise Bluetooth Multi connection mode will be canceled. Bluetooth Multi connection may not be supported depending on the connected devices specifications. Removable/detachable Bluetooth devices (Ex:Dongle etc..) ,windows phone, laptops, TV, etc. do not support Bluetooth Multi connection. After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing depending on the Bluetooth devices. If you move too far out of range from the Sound Tower without first disconnecting your Bluetooth device, it may take a few minutes to connect other Bluetooth devices. If you turn the Sound Tower off and back on, you can connect other Bluetooth devices without waiting. 2. Music can be played on only one of the two connected devices, and when the music is played on LED Indications the other device, the music on the playing device is paused. LED STATE Description If asked for a PIN code when connecting a Bluetooth device, enter <0000>. turn it on. Fast Blink BT PAIRING mode Blue Blink Solid BT READY mode A Bluetooth device is connected. Using Bluetooth Power On When the Sound Tower is turned off, you can connect your smart device via a Bluetooth connection to 1. Press and hold the BASS button on the remote control or on the top panel to set the Bluetooth Power On function on. The third LED flashes. 2. When the Sound Tower is off, connect your smart device via Bluetooth. (For information on Bluetooth connections, refer to your smart devices manual.) 3. When the connection is complete, the Sound Tower turns itself on automatically in Bluetooth mode. Select the desired music to play from your smart device. NOTE Each time you press the BASS button, the Sound no display, just a state switch :
ON-BLUETOOTH POWER OFF-BLUETOOTH POWER Bluetooth Multi connection Sound Tower supports up-to two simultaneous Bluetooth device connections. Sound Tower can play music through one of the connected Bluetooth devices without disconnecting the second device. Bluetooth device 1 Bluetooth device 2 1. Connect Sound Tower to the first device and the second device respectively for the first time.
(See page 13) NOTES If you want to connect Sound Tower to a third device, you can disconnect Sound Tower from one of the two currently connected devices and then connect Sound Tower to the third device. With the Sound Tower and two devices currently connected, when pairing to a new Bluetooth device, the devices currently connected maybe disconnected. You can connect to two Bluetooth devices at the same time. quality. state. circumstances:
Environmental conditions or other factors with connected devices may have effect on playback The Sound Tower automatically turns off after 20 minutes with no command input in the ready The Sound Tower may not perform Bluetooth search or connection correctly under the following If there is a strong electrical field around the Sound Tower. If several Bluetooth devices are simultaneously paired with the Sound Tower. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc. When the Sound Tower is connected to your TV by Bluetooth connection, the video on the TV and audio from the Sound Tower may not be synchronized because the distance between the Sound Tower and the TV is too far. It is recommended to move the Sound Tower closer to your TV within 3.3 ft (1 meter). ENG - 14 ENG - 15 Connecting the Samsung TV via Bluetooth If Sound Tower connected with Samsung TV via Bluetooth, Sound Tower can be controlled by TV UI.
(Volume +/-, Mute On/Off and Power On/Off) 05 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Sound Tower. Easy connect with Samsung TV (SEARCHING TV mode) Sound Tower has SEARCHING TV mode for easy connect with Samsung TV. 1. Press and hold
(Source) button on remote control or top panel then Sound Tower will start to search Samsung TV. 5 LED flow light display (Or, when the wired Stereo Group mode connection is AUX 1 MIC VOL ECHO USB
(5V 2.1A) complete, the SEARCHING TV mode is automatically activated.) 2. If Samsung TV support easy connection, connection popup will be displayed on TV. If Samsung TV has connected with Sound Tower before, Samsung TV will be connected without popup. 3. If Sound Tower can not find any Samsung TV within 5 minutes, Sound Tower will terminate SEARCHING TV mode and turn to BT PAIRING mode. If find any Samsung TV, Sound Tower will POWER Rear of the Sound Tower USB
(5V 2.1A) USB storage device
(not supplied) request connection to those TV. NOTES While in wireless Group Play mode, searching TV is not available. To stop searching Samsung TV, turn off the Sound Tower or press the
(Source) or PAIRING button. Sound Tower does not support multi connection if Samsung TV is connected. While Samsung TV is connected, Sound mode is PARTY and SOUND MODE button is not available. While Samsung TV is connected, Sound Tower APP can not connect with Sound Tower. Connection popup may not be displayed according to TV spec. You can select and connect directly from the Bluetooth speaker list on your TV when the connection pop-up does not appear on your TV. 1. Connect a USB storage device to the USB jacks on your Sound Tower. 2. Press the
(Source) button on the top panel or on the remote control, and then select USB. You can also select a source using USB button on the remote control. 3. No display, change to prompt tone, and LED indicator light. 4. Play music files from the USB storage device through the Sound Tower. The Sound Tower automatically turns off (Auto Power Down) if USB device is not connected, playback stopped, or there is no input for more than 20 minutes. Software Update Samsung may offer updates for the Sound Towers system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Sound Tower. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.com/us/support/. Then, enter or select the model number of your Sound Tower, select the Software & Apps option, and then Downloads. Note that the option names can vary. ENG - 16 ENG - 17 Connecting the Samsung TV via Bluetooth If Sound Tower connected with Samsung TV via Bluetooth, Sound Tower can be controlled by TV UI.
(Volume +/-, Mute On/Off and Power On/Off) 05 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Sound Tower. Easy connect with Samsung TV (SEARCHING TV mode) Sound Tower has SEARCHING TV mode for easy connect with Samsung TV. 1. Press and hold
(Source) button on remote control or top panel then Sound Tower will start to complete, the SEARCHING TV mode is automatically activated.) 2. If Samsung TV support easy connection, connection popup will be displayed on TV. If Samsung TV has connected with Sound Tower before, Samsung TV will be connected without search Samsung TV. 5 LED flow light display (Or, when the wired Stereo Group mode connection is AUX 1 MIC VOL ECHO USB
(5V 2.1A) Rear of the Sound Tower USB
(5V 2.1A) USB storage device
(not supplied) 3. If Sound Tower can not find any Samsung TV within 5 minutes, Sound Tower will terminate SEARCHING TV mode and turn to BT PAIRING mode. If find any Samsung TV, Sound Tower will POWER request connection to those TV. 1. Connect a USB storage device to the USB jacks on your Sound Tower. 2. Press the
(Source) button on the top panel or on the remote control, and then select USB. You can also select a source using USB button on the remote control. 3. No display, change to prompt tone, and LED indicator light. 4. Play music files from the USB storage device through the Sound Tower. The Sound Tower automatically turns off (Auto Power Down) if USB device is not connected, playback stopped, or there is no input for more than 20 minutes. Software Update Samsung may offer updates for the Sound Towers system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Sound Tower. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.com/us/support/. Then, enter or select the model number of your Sound Tower, select the Software & Apps option, and then Downloads. Note that the option names can vary. popup. NOTES button. While in wireless Group Play mode, searching TV is not available. To stop searching Samsung TV, turn off the Sound Tower or press the
(Source) or PAIRING Sound Tower does not support multi connection if Samsung TV is connected. While Samsung TV is connected, Sound mode is PARTY and SOUND MODE button is not available. While Samsung TV is connected, Sound Tower APP can not connect with Sound Tower. Connection popup may not be displayed according to TV spec. You can select and connect directly from the Bluetooth speaker list on your TV when the connection pop-up does not appear on your TV. ENG - 16 ENG - 17 USB AUX TEMPO USB AUX AUX LIGHT LIGHT PAIRING LIGHT SOUND MODE LIGHT LIGHT USB LIGHT PAIRING PAIRING
EFFECT SOUND MODE EFFECT PAIRING SOUND MODE DJ SOUND MODE EFFECT DJ DOWN USB DJ TEMPO EFFECT USB TEMPO AUX This function lets you turn on the DJ effect function. Press the button repeatedly to cycle through the available DJ sound effects:
NOISE, FILTER, CRUSH, CHORUS, WAHWAH or OFF. TEMPO UP EFFECT DJ AUX EFFECT up or down. Press the EFFECT + or EFFECT - buttons to change the level of the each DJ sound effect UP Press the
(DOWN) button to move to the next folder in the USB device. Press the
(UP) button to move to the previous folder in the USB device. Folder UP USB AUX PAIRING Volume up, Volume down BASS SOUND MODE BASS TEMPO Press the down. USB BASS AUX Music Skip EFFECT USB TEMPO Volume up, DJ Volume down /
TEMPO UP AUX previous music file.
(Volume up) or
(Volume down) to adjust the volume level up or Press the EFFECT button to select the next music file. Press the button to select the Press the button to pause a music file temporarily. EFFECT When you press the button again, the music file plays. Press the
(Mute) button to mute the sound. Press it again to unmute the sound. Press the
(Repeat) button to use the Repeat function in USB mode. Press the button repeatedly to cycle through the available repeat functions:
ONE, FOLDER, ALL, RANDOM or OFF. Press the BASS button to use the powerful bass sound. PAIRING EFFECT EFFECT +, -
DJ EFFECT SOUND MODE DOWN
TEMPO DOWN UP DOWN UP EFFECT DJ Folder DOWN EFFECT DOWN LIGHT UP BASS LIGHT PAIRING SOUND MODE EFFECT PAIRING BASS SOUND MODE DJ
EFFECT DOWN Play / Pause DOWN UP DOWN Skip EFFECT DJ UP Mute BASS Repeat BASS BASS BASS
ENG - 19 06 USING THE REMOTE CONTROL How to Use the Remote Control
LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP LIGHT BASS LIGHT
LIGHT Turn the Sound Tower on and off. Power USB AUX PAIRING
SOUND MODE LIGHT LIGHT EFFECT DJ TEMPO
(LIGHT) button to turn the Press the Lighting Mode on. Press the button repeatedly to cycle through the available light modes: AMBIENT, PARTY, DANCE, THUNDERBOLT, STAR or OFF. AUX USB TEMPO PAIRING EFFECT
SOUND MODE DOWN UP USB LIGHT EFFECT Source AUX Press to select a source connected to the Sound Tower. Press the button repeatedly to cycle through the available sources: BT, USB, AUX1 or AUX2 . EFFECT DJ Press to select a source connected directly to USB
"BT" mode. AUX UP DOWN Press and hold the button for more than 5 seconds to enter the "BT PAIRING" mode. TEMPO TEMPO PAIRING Bluetooth SOUND MODE PAIRING EFFECT
PAIRING SOUND MODE
EFFECT DOWN UP PAIRING EFFECT USB BASS EFFECT Press to select the USB or sources connected DJ to the Sound Tower. AUX SOUND MODE
USB USB DOWN TEMPO UP Press to select the AUX1 or AUX2 sources connected to the Sound Tower. BASS EFFECT AUX DJ AUX TEMPO
DJ LIGHT
LIGHT PAIRING EFFECT USB SOUND MODE AUX
LIGHT PAIRING SOUND MODE USB AUX SOUND MODE EFFECT
TEMPO PAIRING SOUND MODE TEMPO Press the button repeatedly to cycle through the available sound effects: PARTY, STANDARD, HIPHOP, EDM, ROCK, LATIN, HOUSE or REGGAE. EFFECT EFFECT DOWN UP DJ BASS DJ EFFECT BASS DOWN UP Press the TEMPO + or TEMPO - buttons to change the tempo of the music up or down. This function only works in the USB mode. EFFECT DJ DOWN TEMPO +, -
EFFECT UP DOWN UP BASS ENG - 18 BASS BASS BASS LIGHT LIGHT PAIRING LIGHT SOUND MODE USB AUX TEMPO USB LIGHT USB AUX AUX SOUND MODE EFFECT LIGHT SOUND MODE EFFECT DJ DOWN USB UP EFFECT DJ AUX Press the EFFECT + or EFFECT - buttons to change the level of the each DJ sound effect EFFECT up or down. PAIRING
EFFECT PAIRING DJ PAIRING SOUND MODE DJ TEMPO EFFECT USB TEMPO AUX This function lets you turn on the DJ effect function. Press the button repeatedly to cycle through the available DJ sound effects:
NOISE, FILTER, CRUSH, CHORUS, WAHWAH or OFF. TEMPO 06 USING THE REMOTE CONTROL How to Use the Remote Control
USB AUX TEMPO EFFECT DJ EFFECT LIGHT PAIRING SOUND MODE DOWN
LIGHT PAIRING
SOUND MODE
DOWN
PAIRING SOUND MODE
EFFECT BASS DJ LIGHT
Bluetooth SOUND MODE PAIRING EFFECT EFFECT USB BASS DOWN UP PAIRING Turn the Sound Tower on and off. Power USB AUX LIGHT LIGHT Press the TEMPO
(LIGHT) button to turn the Lighting Mode on. Press the button repeatedly to cycle through USB AUX the available light modes: AMBIENT, PARTY, Sound Tower. UP USB LIGHT EFFECT Source AUX Press the button repeatedly to cycle through DJ EFFECT the available sources: BT, USB, AUX1 or AUX2 . TEMPO PAIRING USB
"BT" mode. DOWN AUX UP Press and hold the button for more than TEMPO 5 seconds to enter the "BT PAIRING" mode. USB DOWN TEMPO UP SOUND MODE
USB EFFECT AUX DJ TEMPO AUX Press to select the AUX1 or AUX2 sources connected to the Sound Tower. BASS EFFECT LIGHT EFFECT STANDARD, HIPHOP, EDM, ROCK, LATIN, HOUSE or REGGAE. EFFECT DJ Press the button repeatedly to cycle through the available sound effects: PARTY, TEMPO DOWN UP DJ EFFECT DOWN BASS Press the TEMPO + or TEMPO - buttons to change the tempo of the music up or down. UP This function only works in the USB mode. LIGHT PAIRING USB SOUND MODE AUX PAIRING SOUND MODE EFFECT TEMPO USB SOUND MODE AUX
PAIRING SOUND MODE EFFECT DJ DOWN TEMPO +, -
EFFECT UP BASS BASS DOWN UP BASS ENG - 18 UP LIGHT LIGHT BASS BASS PAIRING EFFECT EFFECT +, -
DJ EFFECT SOUND MODE DOWN
TEMPO DOWN UP UP Press the
(DOWN) button to move to the next folder in the USB device. DOWN UP EFFECT DJ Folder DOWN EFFECT
DOWN LIGHT UP BASS Press the
(UP) button to move to the previous folder in the USB device. EFFECT DJ PAIRING EFFECT DANCE, THUNDERBOLT, STAR or OFF. TEMPO
SOUND MODE Press to select a source connected to the LIGHT Folder UP USB AUX PAIRING Volume up, Volume down BASS SOUND MODE BASS TEMPO Press the down.
(Volume up) or
(Volume down) to adjust the volume level up or Press to select a source connected directly to SOUND MODE PAIRING TEMPO USB Volume up, Volume down /
Skip DOWN BASS SOUND MODE TEMPO UP LIGHT PAIRING USB EFFECT BASS AUX DJ Music Skip Press the previous music file. EFFECT AUX button to select the next music file. Press the button to select the EFFECT DJ
EFFECT EFFECT DJ button to pause a music file temporarily. Press the When you press the button again, the music file plays. EFFECT Press to select the USB or sources connected EFFECT DJ AUX to the Sound Tower. DOWN UP Play / Pause DOWN UP Press the Press it again to unmute the sound.
(Mute) button to mute the sound.
(Repeat) button to use the Repeat function in USB mode. Press the Press the button repeatedly to cycle through the available repeat functions:
ONE, FOLDER, ALL, RANDOM or OFF. Press the BASS button to use the powerful bass sound.
Mute BASS Repeat BASS BASS BASS ENG - 19 07 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. Stereo Group connection is not working. Is the power cord plugged into the outlet?
; Connect the power plug to the outlet. A function does not work when the button is pressed. Is the system in wireless Group Play mode?
; Disconnect the wireless Group Play mode and try Stereo Group connection again. It cannot make a Bluetooth connection. Is there static electricity in the air?
; Disconnect the power plug and connect it Is the system connected to another system in wireless Group Play mode or Stereo Group again. Sound dropouts occur in BT mode.
; See the Bluetooth connection sections on page 13. Sound is not produced. Is the Mute function on?
; Press the
(Mute) button to cancel the mute function. Is the volume set to minimum?
; Adjust the Volume. The remote control does not work. Are the batteries drained?
; Replace them with new batteries. Is the distance between the remote control and Sound Tower main unit too far?
; Move the remote control closer to the Sound Tower main unit. mode?
; Try Bluetooth connection again after disconnecting the wireless Group Play or Stereo Group connection. Are the two Bluetooth devices already connected?
; Try Bluetooth connection again after disconnecting other Bluetooth connections. The PAIRING button is not working. Is the system in wireless Group Play mode or Stereo Group mode?
; Try again after disconnecting the wireless Group Play or Stereo Group connection. I want to switch the HOST (MAIN) system to the other in wireless Group Play or Stereo Group connection.
; Disconnect Group Play mode, press the Speaker which you want make to HOST first, and after it use Group LED to judge instead connect the others one by one.
; With Stereo Group mode, MAIN is fixed. You can not change others as MAIN. I want to play AUX1 or AUX2 more than 8 hours without control input.
; Press and hold the button for more than 5 seconds in AUX1 or AUX2 mode to disable Auto Power Down Function. Change from ON-AUTO POWER DOWN to OFF-AUTO POWER DOWN. I cant connect a SUB to Group play.
; After 1 hour, the HOST will block any additional SUB from being added. Press the GROUP PLAY button on HOST, after it display HOST message, the SUB can be reconnected. It cannot make a Wireless/Wired Group/
Add Stereo/Bluetooth connection. Is the distance between systems too far?
; It is recommended to make a Wireless/
Wired Group/Add Stereo/Bluetooth pairing within 3.3 ft (1 meter) from the system.
; The recommended operating distance between Sound Tower systems is closer than 32.8 ft (10 meters). ENG - 20 ENG - 21 07 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Stereo Group connection is not working. Is the system in wireless Group Play mode?
; Disconnect the wireless Group Play mode and try Stereo Group connection again. It cannot make a Bluetooth connection. Is the system connected to another system in wireless Group Play mode or Stereo Group mode?
; Try Bluetooth connection again after disconnecting the wireless Group Play or Stereo Group connection. Are the two Bluetooth devices already connected?
; Try Bluetooth connection again after disconnecting other Bluetooth connections. The PAIRING button is not working. Is the system in wireless Group Play mode or Stereo Group mode?
; Try again after disconnecting the wireless Group Play or Stereo Group connection. 08 LICENSE The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. I want to switch the HOST (MAIN) system to the other in wireless Group Play or Stereo Group connection.
; Disconnect Group Play mode, press the Speaker which you want make to HOST first, and after it use Group LED to judge instead connect the others one by one.
; With Stereo Group mode, MAIN is fixed. You can not change others as MAIN. I want to play AUX1 or AUX2 more than 8 hours without control input.
; Press and hold the button for more than 5 seconds in AUX1 or AUX2 mode to disable Auto Power Down Function. Change from ON-AUTO POWER DOWN to OFF-AUTO POWER DOWN. I cant connect a SUB to Group play.
; After 1 hour, the HOST will block any additional SUB from being added. Press the GROUP PLAY button on HOST, after it display HOST message, the SUB can be reconnected. It cannot make a Wireless/Wired Group/
Add Stereo/Bluetooth connection. Is the distance between systems too far?
; It is recommended to make a Wireless/
Wired Group/Add Stereo/Bluetooth pairing within 3.3 ft (1 meter) from the system.
; The recommended operating distance between Sound Tower systems is closer than 32.8 ft (10 meters). ENG - 20 ENG - 21 09 OPEN SOURCE 11 SPECIFICATIONS AND GUIDE LICENSE NOTICE To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com) 10 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair.
[ENERGY STAR]
ENERGY STAR qualified model only Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.gov for more information of the ENERGY STAR Program. ENERGY STAR qualified model only
(Applicable to Thin Client models only) As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR Program has been to reduced greenhouse gas emissions and save energy through voluntary labeling. Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours. The product can wake with a button press on the chassis from sleep mode. ENERGY STAR qualified model only (The other models) As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency. Specifications Model Name USB Weight Dimensions (W x H x D) AMPLIFIER Rated Output power Li-ion Rechargeable Battery Tweeter Woofer Battery Model Nominal Voltage Rate Capacity MX-ST50B 5V/2.1A 26.46lbs (12.0kg) 13.0x26.2x11.9 inches
(329.34x664.6x301.43 mm) AC 35W, Battery 10W, 6 ohm AC 85W, Battery 35W, 3 ohm EB-T24C-00, 2INR19/65-4 7.34 V 9800 mAh, 71.93 Wh Operating Temperature Range
+41F to +95F (+5C to +35C) Operating Humidity Range 10 % ~ 75 %
Limited Charge Voltage 8.4 V Typical Capacity 10000 mAh, 73.40 Wh NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. ENG - 22 ENG - 23 09 OPEN SOURCE 11 SPECIFICATIONS AND GUIDE LICENSE NOTICE To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com) 10 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair. Specifications Model Name USB Weight Dimensions (W x H x D) MX-ST50B 5V/2.1A 26.46lbs (12.0kg) 13.0x26.2x11.9 inches
(329.34x664.6x301.43 mm) Operating Temperature Range
+41F to +95F (+5C to +35C) Operating Humidity Range 10 % ~ 75 %
AMPLIFIER Rated Output power Li-ion Rechargeable Battery Tweeter Woofer Battery Model Nominal Voltage Rate Capacity AC 35W, Battery 10W, 6 ohm AC 85W, Battery 35W, 3 ohm EB-T24C-00, 2INR19/65-4 7.34 V 9800 mAh, 71.93 Wh Limited Charge Voltage 8.4 V Typical Capacity 10000 mAh, 73.40 Wh NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. ENG - 22 ENG - 23 Disposal of waste batteries and electrical and electrical and electronic equipment (applicable in the European Union and other countries with separate collection systems) This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than 0.004% lead. By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity resons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. Th ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the appropriate collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact Civic Office, your household waste disposal service or the shop where you purchased the product or battery. Do not expose the batteries (battery pack or batteries installed) to excessive heate such as sunshine, fire or the like for a long time. Do not expose the batteries to extreme low temperature conditions that may result in overheating and thermal runaway. Do not dismantle, open or shred secondary cells or batteries. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Dispose of properly. ENG - 24 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
http://www.samsung.com/us/peaceofmind/authorized_resellers.html. Disposal of waste batteries and electrical and electrical and electronic equipment (applicable in the European Union and other countries with separate collection systems) This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than 0.004% lead. By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity resons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. Th ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the appropriate collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact Civic Office, your household waste disposal service or the shop where you purchased the product or battery. Do not expose the batteries (battery pack or batteries installed) to excessive heate such as sunshine, fire or the like for a long time. Do not expose the batteries to extreme low temperature conditions that may result in overheating and thermal runaway. Do not dismantle, open or shred secondary cells or batteries. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Dispose of properly. ENG - 24 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
http://www.samsung.com/us/peaceofmind/authorized_resellers.html. QUESTIONS OR COMMENTS?
Country Samsung Service Center Web Site Address IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 2022 Samsung Electronics Co., Ltd. All rights reserved. 72-WB50ZA-DFUB2-SS
1 2 | Internal Photos | Internal Photos | 1.10 MiB | February 19 2022 / August 22 2022 | delayed release |
1 2 | External Photos | External Photos | 270.83 KiB | February 19 2022 / August 22 2022 | delayed release |
1 2 | ID Label/Location Info | February 21 2022 / February 23 2022 |
1 2 | Authorization Letter | Cover Letter(s) | 116.23 KiB | February 19 2022 / February 23 2022 |
Samsung Electronics Co Ltd Date: 11/23/2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) f) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
use certification only to indicate the products are certified as being in conformity with specified standards;
g) h) i) j) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by :
Company Name: Samsung Electronics Co Ltd Contact Name: Jenni Chun Address: 19 Chapin Rd., Building D Pine Brook New Jersey United States 07058
1 2 | Cover Letter(s) | February 19 2022 / February 23 2022 |
1 2 | Cover Letter(s) | February 19 2022 / February 23 2022 |
1 2 | Cover Letter(s) | February 19 2022 / February 23 2022 |
1 2 | RF Exposure Info | February 21 2022 / February 23 2022 |
1 2 | Setup Photos | Test Setup Photos | 405.46 KiB | February 19 2022 / August 22 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-02-23 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-02-23
|
||||
1 2 | Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0027908797
|
||||
1 2 | Physical Address |
19 Chapin Rd., Building D
|
||||
1 2 |
Pine Brook, NJ
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
A3L
|
||||
1 2 | Equipment Product Code |
MXST50B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** C******
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
973-8********
|
||||
1 2 | Fax Number |
973-8********
|
||||
1 2 |
j******@samsung.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/22/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Sound Tower | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filling. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
1 2 | Name |
S****** G********
|
||||
1 2 | Telephone Number |
+86 0********
|
||||
1 2 |
S******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0068000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC