USER MANUAL HW-N300 SAFETY INFORMATION SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. AC voltage : Rated voltage marked with this symbol is AC voltage. DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use :
This symbol instructs the user to consult the user manual for further safety related information. WARNING
not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be
accordance with the installation instructions.
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CAUTION
Do not expose this apparatus to dripping or
liquids, such as vases, on the apparatus.
To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC NOTE (for U.S.A):
Class B FCC Statement The included module(s) has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
ENG - 2
Reorienting or relocating the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
Consulting the dealer or an experienced
FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. FCC Caution :
approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug
electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. by the manufacturer. ENG - 3 12. Use only with the cart, stand, 3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e.
equipment creating strong magnetic or
the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct
disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. tripod, bracket, or table
or sold with the apparatus. When a cart is used, use caution when
avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power
sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not
or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. ENG - 4 ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation,
FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.
ENG - 5 CONTENTS 01 Checking the Components 8 Inserting battery into the Remote Control
------------------------- 8 02 Product Overview
Bottom Panel of the Soundbar 03 The Remote Control 9
------------------------- 9
------------------------- 10 11 Adjusting the Soundbar volume with a TV remote control
------------------------- 12 04 Connecting the Soundbar Connecting Electrical Power 05 Connecting to a TV Connecting using an Optical Cable Connecting a TV or Bluetooth Device via Bluetooth 06 Connecting an External Device Connecting using an Optical Cable Connecting using an Analog Audio (AUX) Cable 07 Connecting a USB Storage Device Setting Repeat Play Options Software Update 14
------------------------- 14 15
------------------------- 15
------------------------- 17 19
------------------------- 19
------------------------- 20 21
------------------------- 22
------------------------- 22 ENG - 6 08 Installing the Wall Mount (Optional) Installation Precautions Wall mount Components Troubleshooting License Open Source License Notice Important Notes About Service
09 10 11 12
23
------------------------- 23
------------------------- 23 26 27 27 27
------------------------- 28 ENG - 7 01 CHECKING THE COMPONENTS Soundbar Main Unit Power Cord
(AH81-09663A) Remote Control (A81-09662A)/
Battery (AAA x 1)
For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit)
To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. Inserting battery into the Remote Control Match the polarity of the battery to the symbols on the battery compartment.
ENG - 8 02 PRODUCT OVERVIEW Front / Right Side Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top.
Volume
Power Front of the Soundbar Right Side of the Soundbar
mode or status. The color of the LED indicator and the number of lights indicate the active mode as described below. W White LED B Blue LED R Red LED G Green LED Remote control Button LED indicator Mode D.IN
LED indicator Bluetooth Bluetooth pairing 5 Sec AUX USB Connected status Disconnected status W B B B Slow-Blinking Fast-Blinking W W W W W
Source Selects the source input mode. (D.INBluetoothAUX USB)
To turn on Bluetooth pairing mode, change the source to Bluetooth mode and then press and hold the button for more than 5 seconds. ENG - 9 Bottom Panel of the Soundbar POWER
POWER POWER AUX IN AUX IN DIGITAL AUDIO IN DIGITAL AUDIO IN
(OPTICAL)
(OPTICAL) USB (5V 0.5A) USB (5V 0.5A) Bottom of the Soundbar AUX IN DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A)
POWER
AUX
D.IN
USB Connect to the Analog output of an external device. Connect to the digital (optical) output of an external device.
ENG - 10 03 THE REMOTE CONTROL
The images, buttons, and functions of the remote control may differ depending on the model. Turns the Soundbar on and off. Press to select the desired sound effect by choosing SURROUND or STANDARD. Push this button up or down to adjust the volume. Press to enter the Bluetooth mode. You can use your Bluetooth device in this mode. To pair a new Bluetooth device, press and hold this button for 5 seconds or more. Press to enter the D.IN mode. Press this button to turn on the Auto Power Link function. See
"Connecting using an Optical Cable" on pages 15 and 16 for details. Press this button to mute the sound. Press it again to unmute the sound. Push this button up or down to adjust the bass volume within a -6 to
+6 range. Press to enter the "AUX" mode. Press the
Press the
Press the
button to select the
button to select the Press this button to turn off the Auto Power Link function. Press to enter the "USB" mode. ENG - 11 Adjusting the Soundbar volume with a TV remote control If you have a Samsung TV, you can adjust the Soundbars volume using the IR remote control that came with your Samsung TV. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your Samsung remote to control the Soundbars volume. For more information, see the TVs user manual. The default mode for this function is control by a Samsung TV. 1. If your TV is not a Samsung TV and you want your TVs remote to control the Soundbars volume, you can change the settings of this function by pressing and holding the BASS button repeatedly. To have your TVs remote adjust the Soundbars volume, follow Steps 1 through 3 below. 2. If you want to turn off this function completely, follow Steps 1 and 2. Mode Remote control Button Turn off OFF mode 5 Sec All TV mode 5 Sec Samsung TV mode
(Default mode) 5 Sec 1. 2. 3. 4. LED indicator All LEDs Off Blinking W W W W Blinking W W W W Blinking W W W W Each time you press the BASS button and hold it for 5 seconds, the mode switches in the following order: Samsung TVOFFAll TV. The LEDs blink for 3~4 seconds, then return to the standby power off mode. This function may not be available, depending on your TV`s remote control. For a list of manufacturers that support this feature, refer to the FULL MANUAL of your Soundbar
ENG - 12 This volume control function works with IR TV remotes only. It does not work with Bluetooth TV remotes (remotes that require pairing). NOTE Not all TV manufacturers support this feature. For a list of manufacturers that do support this feature, refer to the FULL MANUAL of your Soundbar on the Samsung web site
ENG - 13 04 CONNECTING THE SOUNDBAR Connecting Electrical Power
For information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) POWER AUX IN DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) POWER Electrical Outlet Bottom of the Soundbar Main Unit Power Cord ENG - 14 05 CONNECTING TO A TV Hear TV sound from your Soundbar through wired or wireless connections.
When the Soundbar is connected to selected Samsung TVs, you can control the Soundbar using the TVs remote control. This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.
as well as the volume and mute. Connecting using an Optical Cable Step 1. Connect an Optical Cable Bottom of the Soundbar DIGITAL AUDIO IN
(OPTICAL)
Optical Cable
(not supplied) NOTE When the audio in a broadcast is encoded in Dolby Digital and the Digital Output Audio Format on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.) ENG - 15 Step 2. Change the Soundbars mode to D.IN W
(OR) Right Side of the Soundbar Auto Power Link This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is connected to the TV by an Optical Cable (not supplied). Press the button on the remote control to turn on this function.
Auto Power Link is set to ON by default. (To turn off this function, press the button on the remote control.)
Depending on the connected device, Auto Power Link may not function.
This function is only available in the D.IN mode. Mode Remote control Button LED indicator OFF ON Blinking W W Blinking W W R G ENG - 16 Connecting a TV or Bluetooth Device via Bluetooth Step 1. Change the Soundbar mode to Bluetooth Pairing 5 Sec Fast-Blinking B Step 2. Select the Soundbar in your TVs or Bluetooth devices Menu Bluetooth menu
(OR) Bluetooth device Select
[AV] Samsung Soundbar Nxxx N-Series NOTE You cannot connect more than one TV or Bluetooth device at a time. Step 3. Check the Soundbars status The blue LED should not be blinking once the Bluetooth connection is complete. B If the TV or device fails to connect
If a previously connected Soundbar listing appears in the device list of your TV or Bluetooth device, delete it. (e.g. [AV] Samsung Soundbar Nxxx N-Series)
Then repeat steps 1 through 3. ENG - 17 Disconnecting the Soundbar from the TV Press the Bluetooth. button on the right side panel or on the remote control and switch to any mode but
Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold button for 5 seconds in Bluetooth mode. TV Connect is turned OFF.
To turn TV Connect back on, press and hold the button for 5 seconds with the Soundbar in Bluetooth mode.
TV Connect is set to ON by default. Mode Remote control Button LED indicator TV Connect-OFF TV Connect-ON 5 Sec 5 Sec Blinking B W W Blinking B W W R G NOTES If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft. The Soundbar automatically turns off after 5 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc. ENG - 18 06 CONNECTING AN EXTERNAL DEVICE Connect to an external device via an optical cable or analog cable to play the external devices sound through the Soundbar. Connecting using an Optical Cable Step 1. Connect using an Optical Cable BD / DVD player / Set-top box /
Game console
Optical Cable
(not supplied) Step 2. Change the Soundbars mode to D.IN DIGITAL AUDIO IN
(OPTICAL) Bottom of the Soundbar W
(OR) Right Side of the Soundbar ENG - 19 Connecting using an Analog Audio (AUX) Cable Step 1. Connect using an Analog Audio (AUX) Cable BD / DVD player / Set-top box /
Game console
AUX IN Audio (AUX) Cable
(not supplied) Bottom of the Soundbar Step 2. Change the Soundbars mode to AUX W W
(OR) Right Side of the Soundbar ENG - 20 07 CONNECTING A USB STORAGE DEVICE Step 1. Connect a USB Drive Bottom of the Soundbar USB (5V 0.5A) NOTE The Soundbar automatically turns off (Auto Power Off) if you do not connect a USB device to the Soundbar within 5 minutes. Step 2. Change the Soundbars mode to USB W W W
(OR) Right Side of the Soundbar ENG - 21 Setting Repeat Play Options When the Soundbar is in USB mode, each time you press the how it plays tracks in the following order: Repeat - Off > Repeat - 1 song > Repeat - All songs >
Repeat - Random. See the table below for details. button the USB mode changes Mode Remote control Button LED indicator Repeat - Off Repeat - 1 song Repeat - All songs Repeat - Random W W W Blinking W W W Blinking W W W Blinking W W W Software Update
update stored on it to the USB port on your Soundbar. For more information about how to download
Support). Then, enter or select the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary. ENG - 22 08 INSTALLING THE WALL MOUNT
(OPTIONAL) Installation Precautions
Install on a vertical wall only.
Do not install in a place with high temperature or humidity.
Verify whether the wall is strong enough to support the products weight. If not, reinforce the wall or choose another installation point.
board, iron board, wood, etc.).
Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on. Diameter: M4 Length: 1.37 inches or longer recommended.
Connect cables from the unit to external devices before you install the Soundbar on the wall.
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock. Wall mount Components For Installation on Concrete Walls
(not supplied) A x 2 (M4 x L40) B x 2
1.6 (40 mm) or longer 0.31
(8 mm) 0.15
(4 mm) 2 inches (5cm) or more NOTE Installations on other types of walls will require different kinds of screws. ENG - 23 1.
--- 14.6 (370 mm) ---
CENTER LINE 2. 2 (50 mm) 0.25 (6 mm) NOTES If your TV is installed on the wall, install the Soundbar 2 inches (5cm) or more below your TV. Use a pencil to mark the holes positions. B IMPORTANT NOTE The installation method shown here is for CONCRETE walls. Installation methods will vary depending on the wall type. For installation on dry wall, we strongly recommend you drill screw support holes into the underlying wood studs. 3. A 0.41 (10.5mm) ENG - 24 POWER POWER AUX IN DIGITAL AUDIO IN
(OPTICAL) USB (5V 0.5A) 4. 5. NOTE Supports for wall installation are built into the back of the Soundbar. CAUTION
accidently detached, resulting in personal injury. Do not bump into or strike the Soundbar
(especially from the bottom). The impact could detach the Soundbar from the wall, resulting in personal injury. ENG - 25 09 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. Is the power cord plugged into an outlet?
Connect the power plug to an outlet. A function does not work when the button is pressed. Is there static electricity in the air?
Disconnect the power plug and connect it again. Sound dropouts occur in Bluetooth mode.
See the Bluetooth connection sections on pages 17 and 18. Sound is not produced. Is the Mute function on?
Press the VOL button to cancel the function. Is the volume set to minimum?
Adjust the Volume. The remote control does not work. Is the battery drained?
Replace with new batteries. Is the distance between the remote control and Soundbar main unit too far?
Move the remote control closer to the Soundbar main unit. ENG - 26 10 LICENSE Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States
Reserved. 11 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com). 12 IMPORTANT NOTES ABOUT SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product.
You will be advised of the amount of the administration fee before any work is done or a home visit is made.
If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product
before you contact a service center for a repair. ENG - 27 13 SPECIFICATIONS AND GUIDE
Model Name USB Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Supported play formats
(DTS 2.0 sound is played in DTS format.) HW-N300
4.4 lbs (2.0 kg) 25.2 x 2.6 x 4.2 inches
(641.0 x 65.0 x 107.0 mm)
+41F to +95F (+5C to +35C) 10 % ~ 75 %
LPCM 2ch, Dolby Audio
(supporting Dolby Digital), DTS NOTES
Weight and dimensions are approximate. Dispose unwanted electronics through an approved recycler.
(877) 278 - 0799 ENG - 28 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in
follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center.
Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
The party responsible for product compliance:
Samsung Electronics Co., LTD. America QA lab of Samsung 19 Chapin Rd. Building D, Pine Brook, New Jersey 07058 QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG
(726-7864) www.samsung.com/us/support 2018 Samsung Electronics Co., Ltd. All rights reserved. Samsung Electronics America, Inc. 85 Challenger Road
72-SAMUSA-MANB1-SS 72-SAMUSA-MANB1-SS