FCC ID: A3LEPN3300 WIRELESS CHARGER

QUICK START GUIDE EP-N3300 Wireless Charger Stand A B 2 C a 2 1 3 E n g l i s h Copyright 2020 Samsung Electronics Co., Ltd. 3 After detaching the stand from the wireless charger and connecting the charger to the wireless charger ( A ), you can lay the phone stand and charge the mobile device. ( B ) You can also keep the phone stand upright. Insert the stand to the space on the bottom of the back side and push it down while pressing a part. Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. Use only the charger and cable supplied with the device. Your device contains magnets, which may affect medical devices, such as pacemakers or implantable cardioverter defibrillators. If you are using any of these medical devices, keep your device a safe distance from them and consult with your physician before you use the device. Visit www.samsung.com to view the user manual and the safety information. Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. 4 Correct disposal This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. This product is India RoHS compliant. E n g l i s h For information on Samsungs environmental commitments and product-specific regulatory obligations, e.g. REACH, WEEE, Batteries, visit samsung.com/uk/aboutsamsung/

samsungelectronics/corporatecitizenship/data_corner.html Declaration of Conformity Samsung Electronics declares that this device complies with the essential requirements and relevant provisions of Directive 2014/53/EU. Go to www.samsung.com/mobile_doc to view the Declaration of Conformity. Band and mode Band and mode Output power Wireless Charging 120.5 kHz, 125.7-129.7 kHz 24.92 dBA/m at 10 m 5 FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites tablies par Industrie Canada en matire d'exposition aux radiofrquences dans un environnement non contrl. Cet appareil et son antenne ne doivent pas tre colocaliss ou fonctionner en conjonction avec tout autre antenne ou metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps.

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States 26 May 2020 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: A3LEPN3300 Towhomitmayconcern:

I,theundersigned,herebyauthorizeLabManagerHyunchae, You andofSGSKoreaCo.,Ltd.and hereafterreferredtoasSGSKorea,toactonourbehalfinallmannersrelatingtoapplicationfor equipmentauthorization,includingsigningofalldocumentsrelating tothesematters.AnyandallactscarriedoutbyLabManagerHyunchae, Youof SGSKoreaCo., Ltd.onourbehalfshallhavethesameeffectasactsofourown. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGSKoreaasouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any referencethereto and returnanycertification documents as requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

19 Chapin Rd., Building D Pine Brook, New Jersey, 07058, United States 26 May 2020 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 REQUEST FORCONFIDENTIALITY FCC ID: A3LEPN3300 ToWhomItMayConcern:

PursuanttoSections0.457and0.459oftheCommissionsRules(CFR47),andSection552(b)(4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantand provideunjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShortTermConfidentialityfor180daysafterthegrantasoutlined in Public Notice DA 041705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested PermanentandTemporaryConfidentialexhibitsarelistedasfollows:

CONFIDENTIALLIST 1 BlockDiagram Permanent 2 OperationalDescriptions ShortTerm 3 4 5 6 Schematics ExternalPhotos InternalPhotos TestSetupPhotos 7 UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. SincerelyYours, Jenni Chun /GeneralManager Samsung ElectronicsNorth America INC. TEL: +1-973-808-6362 E-mail: j1.chun@samsung.com

Cover Letter-Wireless Charger Approval FCC ID: A3LEPN3300 Date: 22 May, 2020 Gentlemen:

Theres a EP-N3300 that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, EP-N3300, with its designed features and specified description, considers special requirements for KDB 680106 DO1 v03 section 5, b) requirements. KDB 680106 D01 v03 Section 5, b) Requirements: | Product Technical Specification: | Result:

(1) Power transfer frequency is less that 1 MHz 0.125 7 ~ 0.129 7 MHz and Complied 0.120 5 MHz

(2) Output power from each primary coil is less than | 7.5 Watts Complied or equal 15 watts.

(3) The transfer system includes only single primary | The transfer system including a Complied and secondary coils. This includes charging systems that may have multiple primary coils and clients that charging system with multiple primary coils are to detect and are able to detect and allow coupling only between allow only between individual pairs individual pairs of coils of coils.

(4) Client device is placed directly in contact with Client device is placed directly in Complied the transmitter contact with the transmitter.

(5) Mobile exposure conditions only (portable Mobile conditions only Complied exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top H-Field: 0.112 A/m (at 15 cm) Complied

< 0.815 A/m (50% of the limit) surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, Grae By: a Jungmin Yang

(Signature1) (Print name) Title: Technical Manager On behalf of: SGS Korea Co., Ltd. (Company Name) Telephone: +82-31-428-0903