FCC ID: A3LEPP2400 WIRELESS CHARGER

1 2 3 A QUICK START GUIDE EP-P2400 WIRELESS CHARGER EP-P5400 WIRELESS CHARGER DUO Printed in Korea XXXXXX Rev.1.1 EU/ASIA Type 11/2021 EP-P2400:

EP-P5400:

3 Correct disposal FCC Information French Example Canadian Compliance Statements 1 2 a a b Copyright 2021 Samsung Electronics Co., Ltd. English Connect the charger to the wireless charger ( 1 ) and place the centre of the mobile device or Galaxy Buds on the charging coil centre ( a ) to charge it ( A ). You can also charge the Galaxy Watch or Buds on the watch or buds charging coil ( b ) of the wireless charger ( B ). Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device, Galaxy Buds or the Watch, and the wireless charger. information. Visit www.samsung.com to view the user manual and the safety Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. A B This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. AEEE Ynetmeliine Uygundur. Ce produit est en conformit avec la directive RoHS. Samsung, PO Box 12987, Dublin. IE or Yateley, GU46 6GG. UK For information on Samsungs environmental commitments and product regulatory obligations, e.g. REACH, visit our sustainability page available via www.samsung.com. Declaration of Conformity Samsung declares that this device is in compliance with Directive 2014/53/

EU and with the relevant UK statutory requirements. Go to www.samsung.com/mobile_doc to view the Declaration of Conformity. Band and mode EP-P2400:

Band and mode Wireless Charging 126.2 kHz ~ 129.2 kHz, 119 kHz ~ 122 kHz EP-P5400:

Band and mode Wireless Charging Antenna 1:

119 kHz ~ 122 kHz, 126.2 kHz ~ 129.2 kHz Antenna 2:

126.2 kHz ~ 129.2 kHz, 144.5 kHz ~ 147.5 kHz Output power 74.7 dBV/m Output power 76.7 dBV/m This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :

(1) This Device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

"Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device."

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body Cet quipement doit tre install et utilis une distance minimale de 20cm entre le radiateur et votre corps. It is the responsibility of the installer to ensure that when using the outdoor antenna kits, only those antennas certified with the product are used. The use of any antenna other than those certified with the product is expressly forbidden by FCC rules 47 CFR part 15.204 and IC RSS standards. Il est de la responsabilit de l'installateur de s'assurer que lorsque vous utilisez les kits d'antennes extrieures, seules les antennes certifis avec le produit sont utiliss. L'utilisation d'une antenne autre que ceux qui sont certifis avec le produit est expressment interdite par la rglementation FCC partie 47 CFR 15.204 et IC normes RSS.

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment Bottom

Samsung Electronics Co Ltd May 10, 2022 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: A3LEPP2400 Applicant: Samsung Electronics Co Ltd Dear Examiner, This is to request a Class II Permissive change for FCC ID: A3LEPP2400 originally granted on 12/13/2021 (date). The change under this application is as below. Several parts on the EUT dualized. This document is written to state dualized type of parts. This dualization is purpose to prepare for shortage of supply of parts Before & After dualized parts are identical except model name and manufacturer. For more details of changed parts, Please see the part List in the next page. Dualized parts were marked yellow. Sincerely, Name: Jenni, Chun Date: May 03, 2022 Title: General Manager Signature of applicant FCC Class II PC request letter Rev1.1 1. 15W SINGLE (EP-P2400) Part List NO Specification ERP Code Description MAKER Location No. Quantity 4CL16R3U5010 ANTENNA WPT COIL-WPT_A11 CKWRD5010-6.3uH/K SHENZHEN CENKER 3 10 14 18 4CL16R3U5011 ANTENNA WPT COIL-WPT_A11 (6.3uH) A11 TX Coil (SYWT-6R3K-A11) 4C1CSY8113AD DCDC_BUCK CONVERTER_6PIN_16V_3A_500kHz SY8113IADC 4C1CJW5357 DCDC_BUCK CONVERTER_6PIN_18V_3A_600kHz JW5357 4CTRPDC3906Z MOSFET_N-CHANNEL_7PIN_30V_60A 4CTRWTM303N MOSFET_N-CHANNEL_7PIN_30V_50A 4CDD010U1401 DIODE_TVS_UNDIRECTIONAL_10V 4CDD010U1402 DIODE_TVS_UNDIRECTIONAL_10V PDC3906Z QR WTM303N056L-HAF RDL1401 E10MUPC1C-HAF 30 4CRE02R2J010 1005_2.2Rohm,5%,1/16W R101 R102 R104 R106 R107 R108 R131 SILERGY JOULWATT POTENS SEMTECH RFSEMI SEMTECH WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING Coil ASSY_A11() U104 U108 U111 U112 U113 D106 D107 R118 R119 R162 R141 R148 R152 R153 R103 R105 R142 R156 R157 R158 R145 R146 R136 R123 R124 R122 R154 1 1 4 2 3 1 7 3 2 4 2 1 2 4 2 28 4CRE0000J010 1005_0Rohm,5%,1/16W 29 4CRE01R0J010 1005_1Rohm,5%,1/16W 31 4CRE04R7J010 1005_4.7Rohm,5%,1/16W 32 4CRE0200J010 1005_20Rohm,5%,1/16W 33 4CRE0220J010 1005_22Rohm,5%,1/16W 34 4CRE0680J010 1005_68Rohm,5%,1/16W 35 4CRE0101J010 1005_100Rohm,5%,1/16W 36 4CRE0222J010 1005_2.2Kohm,5%,1/16W 38 4CRE5101F010 1005_5.1Kohm,1%,1/16W WR04X000 PTL CR-02JL6----0R WR04X1R0 JTL CR-02JL6----1R WR04X2R2 JTL CR-02JL6---2R2 WR04X4R7 JTL CR-02JL6---4R7 WR04X200 JTL CR-02JL6---20R WR04X220 JTL CR-02JL6---22R WR04X680 JTL CR-02JL6---68R WR04X101 JTL CR-02JL6--100R WR04X222 JTL CR-02JL6--2K2 WR04X472 JTL CR-02JL6---4K7 WR04X5101FTL CR-02FL6---5K1 37 4CRE0472J010 1005_4.7Kohm,5%,1/16W R125 R126 R132 R133 NO ERP Code Specification Description MAKER Location No. Quantity 39 4CRE0103J010 1005_10Kohm,5%,1/16W R113 R114 R115 R127 R138 R139 R140 R149 40 4CRE1002F010 1005_10Kohm,1%,1/16W 41 4CRE1802F010 1005_18Kohm,1%,1/16W 42 4CRE2202F010 1005_22Kohm,1%,1/16W 43 4CRE3002F010 1005_30Kohm,1%,1/16W 44 4CRE4122F010 1005_41.2Kohm,1%,1/16W 45 4CRE8202F010 1005_82Kohm,1%,1/16W 48 4CRE2403F010 1005_240Kohm,1%,1/16W 49 4CRE0020F012 2012_0.02Rohm,1%,1/8W 50 4CRE2002F012 2012_20Kohm,1%,1/8W 52 4CMC220J0500 1005_22pF,5%,50V,NP0 53 4CMC102K1500 1005_1nF,10%,50V,X7R 56 4CMC392K1500 1005_3.9nF,10%,50V,X7R WR04X103 JTL CR-02JL6---10K WR04X1002FTL CR-02FL6---10K WR04X1802FTL CR-02FL6---18K WR04X2202FTL CR-02FL6---22K WR04X3002FTL CR-02FL6---30K WR04X4122FTL CR-02FL6 --41K2 WR04X8202FTL CR-02FL6---82K WR04X104 JTL CR-02JL6--100K WR04X224 JTL CR-02JL6--220K WR04X2403FTL CR-02FL6--240K WW08XR020FTL RS-05FL7 - - 0R02 WR08X2002FTL CR-05FL7---20K 0402N220J500CT CC0402JRNPO9BN220 CL05B102KB5NNNC CC0402KRX7R9BB102 GRM155R71H392KA01D CC0402KRX7R9BB392 WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN VIKING WALSIN YAGEO SAMSUNG YAGEO MURATA YAGEO R109 R110 R120 R128 R137 R117 R121 R112 R111 R155 R151 C156 C101 C102 C127 C104 C106 C151 46 4CRE0104J010 1005_100Kohm,5%,1/16W R134 R135 R143 R144 R159 R160 R161 47 4CRE0224J010 1005_220Kohm,5%,1/16W R130 R150 8 1 2 1 2 1 1 7 2 1 1 1 3 3 1 NO ERP Code Specification Description MAKER Location No. Quantity 58 4CMC223K1500 1005_22nF,10%,50V,X7R C114 C152 C159 C161 57 4CMC103K1500 1005_10nF,10%,50V,X7R 59 4CMC104K1500 1005_100nF,10%,50V,X7R 60 4CMC105K1060 1005_1uF,10%,6.3V,X7R 61 4CMC105K1160 1005_1uF,10%,16V,X5R 69 4CMC226M2252 2012_22uF,20%,25V,X5R CL05B103KB5NNNC CC0402KRX7R9BB103 GRM155R71H223KA12D CC0402KRX7R9BB223 GRM155R71H104KE14D CC0402KRX7R9BB104 GRM155R70J105KA12D CC0402KRX7R5BB105 CL05A105KO5NNNC CC0402KRX7R6BB105 CL21A226MAYNNNE C107 C113 SAMSUNG YAGEO MURATA YAGEO MURATA YAGEO MURATA YAGEO SAMSUNG YAGEO SAMSUNG C134 C139 C140 C141 C142 C117 C118 C119 C120 C115 C116 C124 C132 C136 C138 C146 C147 C148 C157 C158 C166 C177 13 1 4 1 5 4 CE TDK212BBJ226MG-T TAIYO YUDEN

Samsung Electronics Co Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: A3LEPP2400 Date: May 03, 2022 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jenni Chun Title: General Manager

Letter of Authorization Company

: Samsung Electronics Co Ltd Address

: 19 Chapin Rd., Building D, Pine Brook, New Jersey, United States, 07058 Product Name

: WIRELESS CHARGER Model Number

: EP-P2400 FCC Identifier

: A3LEPP2400 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Jenni Chun Date: May 03, 2022 Title: General Manager Signature of applicant:

Samsung Electronics Co Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 07, 2021 Subject; Request for Confidentiality FCC ID: A3LEPP2400 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jenni Chun Title: General Manager