Lock. Unlock. Anywhere. Securely control to your Deadbolt from anywhere with your AndroidTM device, iPhone, iPad, iPod touch WI-FI ADAPTER Wi-Fi Adapter The works with your Deadbolt. After setting up the Wi-Fi Adapter, you can use the app to control your lock from anywhere. Smart Smart Deadbolt If your is not installed or paired with the app yet, please refer to those installation instructions. If your lock is already installed, proceed with these instructions. Add Wi-fi Adapter using the Schlage Sense app. Press the + icon in the upper right hand corner of the screen, then follow instructions. The LED flashes once per second during setup. Your internet device must have Wi-Fi on. Q&A How do I reset to factory default?
Press and hold the button for 10 seconds. What is the Wi-fi adapter range?
Around 40 feet. Make sure your Sense lock is within Bluetooth range. Which app do I use to control my lock?
Adding this product to the Schlage Sense Smart Deadbolt makes the lock accessible from anywhere using the Schlage Sense app for iOS and Android. Need Help?
U.S.A.: 888-805-9837 Canada: 800-997-4734 Mexico: 018005067866 How-To Center Visit the How-To Center for installation videos, troubleshooting, and more help!
schlage.com/how-to-center WARRANTY Lifetime Limited Mechanical and Finish Warranty and 3-Year Limited Electronics Warranty Subject to the terms and conditions of the warranty, Schlage extends a three-year limited electronics warranty to the original consumer user
(Original User) of our Schlage brand product (Product) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. See answers.schlage.com for specific warranty details and limitations, or contact Schlage Customer Service at (888) 805-9837 in the U.S. and Canada or (800) 506-7866 in Mexico for assistance. FCC/IC Statement FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure To comply with FCC/IC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20 cm separation distance between the antenna and all persons. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment aux normes dIndustrie Canada, ce transmetteur radio ne peut fonctionner quavec une antenne dont le type et le gain maxiumum sont approuvs par Industrie Canada. Pour rduire les risques dintefrences radio encourus par dautres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance rayonne isotrope quivalente
(PIRE) ne soit pas suprieure celle ncessaire pour tablir une bonne communication. This Device complies with Industry Canada License-
exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme norme Industrie Canada RSS exempts de licence (s). Son fonctionnement est soumis aux deux conditions suivantes: 1) cet appareil ne doit pas provoquer dinterfrences, et 2) cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de lappareil. Allegion 2017 Sense WA QSG Rev. 02/17-a01 RF Exposure To comply with FCC/IC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20 cm separation distance between the antenna and all persons. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment aux normes dIndustrie Canada, ce transmetteur radio ne peut fonctionner quavec une antenne dont le type et le gain maxiumum sont approuvs par Industrie Canada. Pour rduire les risques dintefrences radio encourus par dautres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance rayonne isotrope quivalente (PIRE) ne soit pas suprieure celle ncessaire pour tablir une bonne communication. This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme norme Industrie Canada RSS exempts de licence (s). Son fonctionnement est soumis aux deux conditions suivantes: 1) cet appareil ne doit pas provoquer dinterfrences, et 2) cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de lappareil. Exposicin a radiofrecuencia Para cumplir con los requisitos de exposicin a radiofrecuencia de la FCC/IC para los dispositivos mviles de transmisin, este transmisor se debe utilizar o instalar solamente en lugares donde haya, al menos, 20 cm de distancia de separacin entre la antena y las personas. Segn las reglamentaciones de Industry Canada, este radiotransmisor solo puede funcionar usando una antena de un tipo y ganancia mxima (o menor) aprobadas para el transmisor por Industry Canada. Para reducir una posible interferencia de radio a otros usuarios, el tipo de antena y su ganancia debern elegirse de modo tal que la potencia radiada isotrpicamente equivalente
(e.i.r.p.) no sea mayor que la permitida para una comunicacin exitosa. Este dispositivo cumple con los estndares RSS de licencia exenta de Industry Canada. Su funcionamiento est sujeto a las siguientes dos condiciones: (1) Este dispositivo no debe causar una interferencia y (2) Este dispositivo debe aceptar cualquier interferencia, incluida la interferencia que pueda ocasionar un funcionamiento no deseado. Exposition aux radiofrquences To comply with FCC/IC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20 cm separation distance between the antenna and all persons. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment aux normes dIndustrie Canada, ce transmetteur radio ne peut fonctionner quavec une antenne dont le type et le gain maxiumum sont approuvs par Industrie Canada. Pour rduire les risques dintefrences radio encourus par dautres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance rayonne isotrope quivalente (PIRE) ne soit pas suprieure celle ncessaire pour tablir une bonne communication. This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme norme Industrie Canada RSS exempts de licence (s). Son fonctionnement est soumis aux deux conditions suivantes: 1) cet appareil ne doit pas provoquer dinterfrences, et 2) cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de lappareil. WARRANTY 3-Year Limited Electronics Warranty Subject to the terms and conditions of the warranty, Schlage extends a three-year limited electronics warranty to the original consumer user (Original User) of our Schlage brand product
(Product) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. See answers.schlage.com for specific warranty details and limitations, or contact Schlage Customer Service at (888) 805-9837 in the U.S. and Canada or (800) 506-7866 in Mexico for assistance. FCC/IC Statement FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. GARANTA Garanta limitada de 3 aos sobre los componentes electrnicos En virtud de los trminos y condiciones de esta garanta, Schlage extiende una garanta limitada de tres aos sobre los componentes electrnicos, al usuario consumidor original (Usuario original) de nuestro producto Schlage (Producto) contra defectos en los materiales y la fabricacin, siempre que el Usuario original habite la residencia en donde se instal originalmente el Producto. Consulte answers. schlage.com para ver informacin y limitaciones especficas de la garanta, o comunquese con el Servicio de Asistencia al Cliente de Schlage llamando al (888) 805-9837 en los EE. UU., al 800-997-4734 en Canad o 018005067866 en Mxico para obtener ayuda Declaraciones de la FCC /IC Este equipo ha sido evaluado, y se determin que cumple con los lmites para los dispositivos digitales de clase B, de conformidad con la Seccin 15 de las Normas de la FCC. Estos lmites estn diseados para brindar una proteccin razonable contra interferencia daina en una instalacin residencial. Este equipo genera, usa y puede radiar energa de radiofrecuencia y, si no se instala y utiliza siguiendo las instrucciones, puede causar interferencia daina en las comunicaciones por radio. Sin embargo, no puede garantizarse que no se producir una interferencia en una instalacin especfica. Si este equipo causa interferencia daina en la recepcin de radio o televisin, que puede determinarse al encender y apagar el equipo, el usuario deber intentar corregir la interferencia mediante una de las siguientes medidas:
- Reorientar o reubicar la antena receptora.
- Separar ms el equipo del receptor.
- Conectar el equipo en una toma de un circuito diferente del que est conectado el receptor.
- Consultar al distribuidor o a un tcnico que tenga experiencia en radio/TV para obtener ayuda. Este dispositivo cumple con la Seccin 15 de las Normas de la FCC. Su funcionamiento est sujeto a las siguientes dos condiciones:
1. Este dispositivo no debe causar una interferencia daina. 2. Este dispositivo debe aceptar cualquier interferencia que se reciba, incluida la interferencia que pueda ocasionar un funcionamiento no deseado Cualquier cambio o modificacin que no haya sido expresamente aprobado por la parte responsable del cumplimiento puede anular la autoridad del usuario para operar este equipo. GARANTIE Garantie de trois (3) ans pour llectronique Assujetti aux conditions de cette garantie, Schlage tend la garantie limite de trois ans des pices lectroniques pour le consommateur dorigine ( Utilisateur dorigine ) de notre produit (
Produit ) Schlage contre les dfauts de matriaux ou de main doeuvre aussi longtemps que lUtilisateur dorigine occupe les locaux dhabitation o le Produit a t originalement install. Pour obtenir les dtails prcis et les limitations de la garantie, visitez le site answers. schlage.com ou communiquez avec le service la clientle Schlage au (888) 805-9837 aux tats-Unis, au 800-997- 4734 au Canada ou au 018005067866 au Mexique pour obtenir de laide. Dclarations de la CFC et dIC nonc sur les interfrences de la CFC Cet quipement a t examin et jug conforme aux limites fixes pour un dispositif numrique de classe B, en vertu de la Section 15 des rglements de la CFC. Ces limites sont tablies en vue de fournir une protection raisonnable contre tout brouillage dans une installation rsidentielle. Cet quipement entrane des usages et peut produire des radiofrquences; sil nest pas install et utilis selon les instructions, il peut causer du brouillage nuisible aux radiocommunications. Toutefois, il ny a aucune garantie que le brouillage ne se produira pas dans une installation quelconque. Si cet quipement cause du brouillage la rception dun appareil radio ou dune tlvision, ce quon peut tablir lorsquon met lquipement en marche et quon le met hors tension, nous encourageons lutilisateur tenter de corriger ce brouillage de linterfrence en adoptant lune des mesures suivantes :
- Rorientez ou dplacez lantenne rceptrice.
- Augmentez la distance qui spare lquipement et le rcepteur.
- Branchez lquipement dans une prise de courant ou un circuit diffrent de celui o le rcepteur est branch.
- Consultez le dtaillant ou demandez de laide dun technicien dexprience en matire de radio et de tlvision. Ce dispositif est conforme la partie 15 des rglements de la CFC. Le fonctionnement est assujetti aux deux conditions suivantes :
1. Cet appareil ne gnre peut-tre pas dinterfrence nuisible et 2. il doit accepter toute interfrence reue, y compris celle pouvant causer une utilisation non voulue. Tout changement ou toute modification qui na pas t expressment approuv par la partie responsable de la conformit pourrait annuler le droit de lutilisateur de faire fonctionner cet quipement.